Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 103 views

    t313 Parameters

    Uploaded by

    Amir Moshfegh Kia
    This document describes various timers used in radio connection supervision and radio resource control procedures. It includes the dchRcLostT timer that is started when all radio links for a connection are lost and will trigger release of the radio connection if expired. It also describes the hsDschRcLostT timer that controls supervision of the uplink synchronization of radio links containing the serving HS-DSCH radio link and will release the signaling connection if expired. Finally, it mentions several tRrc timers (tRrcActiveSetUpdate, tRrcChSwitch3, tRrcRABEst) used to supervise different radio resource control procedures and can only be configured by Ericsson personnel.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    t313 Parameters

    Uploaded by

    Amir Moshfegh Kia
    103 views4 pages
    This document describes various timers used in radio connection supervision and radio resource control procedures. It includes the dchRcLostT timer that is started when all radio links for a connection are lost and will trigger release of the radio connection if expired. It also describes the hsDschRcLostT timer that controls supervision of the uplink synchronization of radio links containing the serving HS-DSCH radio link and will release the signaling connection if expired. Finally, it mentions several tRrc timers (tRrcActiveSetUpdate, tRrcChSwitch3, tRrcRABEst) used to supervise different radio resource control procedures and can only be configured by Ericsson personnel.

    Original Description:

    t313

    Original Title

    260127987-t313-Parameters

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document describes various timers used in radio connection supervision and radio resource control procedures. It includes the dchRcLostT timer that is started when all radio links for a connection are lost and will trigger release of the radio connection if expired. It also describes the hsDschRcLostT timer that controls supervision of the uplink synchronization of radio links containing the serving HS-DSCH radio link and will release the signaling connection if expired. Finally, it mentions several tRrc timers (tRrcActiveSetUpdate, tRrcChSwitch3, tRrcRABEst) used to supervise different radio resource control procedures and can only be configured by Ericsson personnel.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    103 views4 pages

    t313 Parameters

    Uploaded by

    Amir Moshfegh Kia
    This document describes various timers used in radio connection supervision and radio resource control procedures. It includes the dchRcLostT timer that is started when all radio links for a connection are lost and will trigger release of the radio connection if expired. It also describes the hsDschRcLostT timer that controls supervision of the uplink synchronization of radio links containing the serving HS-DSCH radio link and will release the signaling connection if expired. Finally, it mentions several tRrc timers (tRrcActiveSetUpdate, tRrcChSwitch3, tRrcRABEst) used to supervise different radio resource control procedures and can only be configured by Ericsson personnel.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 4

    dchRcLostT

    long , Range [0....100 (18000)] , Default : 50 , P5_RNC


    long , Range [0....100 (18000)] , Default : 50 , P6_RNC
    long , Range [0....100 (18000)] , Default : 50 , P6FP_RNC
    long , Range [0....100 (18000)] , Default : 50 , P7ED_RNC

    Timer that is started when all radio links for a connection are lost. At time-out, the radio
    connection is considered lost.
    Special values:
    The value 18000 deci seconds = 1800 s = 30 minutes is used for testing purposes to
    "disable"
    the Radio Connection Supervision functionality for a UE on dedicated channels.
    Unit: 0.1 s
    Resolution: 5
    Change takes effect: The value CANNOT be changed for an ongoing connection; that is,
    whenever the attribute is reconfigured in the RNC, the new value shall only apply to new
    connections.

    RADIO CONNECTION SUPERVISION EVALUATION


    This algorithm keeps track of the synchronization status of the radio connection by assigning
    a tag to every RLS. Upon creation of a new RLS the tag is set to "Fail". The tag is shifted to
    "OK" upon reception of a RL restore indication and then to "Fail" upon reception of a RL
    failure indication. If all RLSs are tagged as "Fail" and the timer dchRcLostT has expired,
    then the radio connection shall be considered lost and the overall release of the connection is
    triggered as shown in Figure 4-11.

    hsDschRcLostT
    long , Range [0....600 (18000)] , Default : 100 , P5_RNC
    long , Range [0....600 (18000)] , Default : 50 , P6_RNC
    long , Range [0....600 (18000)] , Default : 50 , P6FP_RNC

    long , Range [0....600 (18000)] , Default : 50 , P7ED_RNC

    Controls the RCS timer for supervision of uplink synch of RLS containing the serving
    HSDSCH
    radio link.
    Special values:
    18000 indicates that the RCS function is switched off. Used for test purposes.
    Unit: 0.1 s Resolution: 5
    Where HSDPA connections are concerned, the radio connection shall be considered
    unsynchronized when the RLS that contains the Serving HS-DSCH RL is unsynchronized. A
    timer, hsdDchRcLostT, shall be started when that RLS is considered unsynchronized. If the
    RLS is unsynchronized during hsDschRcLostT and the timer expires, the signaling
    connection is released.
    For HS users, only the RL in the serving HS-DSCH cell is supervised. Also, a separate
    parameter, hsdschRcLostT, determines how long time a HS user can be out-of-sync before
    the connection is released..
    Since the synchronization state is relative only to the link set containing the HS-DSCH, the
    synchronization status may change with a serving HS-DSCH cell change.

    tRrcActiveSetUpdate
    #################################################
    #################################
    MO Class Attribute Type
    Flags
    #################################################
    #################################
    RncSystemParameters tRrcActiveSetUpdate
    long EricssonOnly
    ------------------------------------------------------------------------------------------------------------------
    ------------------
    Timer used to supervise the RRC Active Set Update procedure.
    Started at transmission of RRC ACTIVE SET UPDATE REQUEST.
    Stopped at reception of RRC ACTIVE SET UPDATE COMPLETE or RRC ACTIVE SET
    UPDATE FAILURE.
    Unit: s
    This attribute may only be changed by Ericsson personnel.
    Range: 1 to 30, Default=5
    **********************************************************************************
    **************************************************

    tRrcChSwitch3
    #################################################
    #################################
    MO Class Attribute Type
    Flags
    #################################################
    #################################
    RncSystemParameters tRrcChSwitch3
    long EricssonOnly
    ------------------------------------------------------------------------------------------------------------------
    ------------------
    Started at transmission of RRC: TRANSPORT CHANNEL RECONFIGURATION or
    RADIO BEARER RECONFIGURATION.
    Stopped at reception of RRC: TRANSPORT CHANNEL RECONFIGURATION
    COMPLETE or RADIO BEARER RECONFIGURATION COMPLETE.
    Unit: s
    This attribute may only be changed by Ericsson personnel.
    Range: 1 to 30, Default=5
    **********************************************************************************

    tRrcRABEst
    #################################################
    #################################
    MO Class Attribute Type
    Flags
    #################################################
    #################################
    RncSystemParameters tRrcRABEst
    long EricssonOnly
    ------------------------------------------------------------------------------------------------------------------
    ------------------
    Waiting time for RRC RESPONSE.
    Unit: s
    This attribute may only be changed by Ericsson personnel.
    Range: 1 to 30, Default=5
    **********************************************************************************
    t313:
    T313 Out-of-Sync Reception Timer

    3GPP TS 25.331 8.5.6 states that after receiving N313 consecutive "out of sync" indications from
    layer 1 (see N313 Successive Out-Of-Sync Reception Max ), the UE shall start the T313 timer. Upon
    receiving N315 successive "in sync" indications from layer 1 ( N315 Successive In-Sync Reception
    Counter ), the UE shall stop and reset the T313 timer. If T313 expires, a "Radio Link failure" has
    occurred, and the UE shall drop the call.

    You might also like