Gujarat Technological University: Civil Engineering SUBJECT CODE: 2150609

GUJARAT TECHNOLOGICAL UNIVERSITY
CIVIL ENGINEERING
SOIL MECHANICS
SUBJECT CODE: 2150609
B.E. 5thSEMESTER
Type of course:Core
Pre-requisites: Geotechniques & Applied Geology (GTAG) and Strength of Materials and Fluid
Mechanics
Rationale: Soil Mechanics is very fundamental subject consisting of determination of various soil
parameters theoretically and experimentally based on laws of mechanics. Any civil engineering structure
needs strong and stable foundation which depends on proper understanding of soil behaviour,
determination and interpretation of soil parameters, determination of stresses in soil. The design of any
foundation system is based on understanding of soil parameters and its implication based on through
interaction with type of structure. The course on Soil Mechanics provides the students basic knowledge on
soil properties, testing procedures, suitability of test and analytical solutions necessary for design and
behaviour of soil.
Content:
Sr. Total Module

Topics
No. hours Weightage
1 Compaction:
Definition, Theory of compaction, Factors affecting compaction,
Laboratory compaction tests, Effect of compaction on soil properties, 06 10
Placement water content, Placement layer thickness, Field control of
compaction, Proctor's needle, Methods of compaction used in field.
2 Shear Strength of Soil :
Mohr's strength theory, Mohr- coulomb's strength theory, Modified
Mohrcoulomb's theory, Shear parameters tests: Direct shear test, 07 20
Unconfined compression test, lab. Vane shear test, Triaxial compression
test, Shear tests based on drainage conditions.
3 Consolidation of Soils :
Compressibility of soils, Definitions and mechanism of consolidation,
Spring analogy, Void ratio and effective stress relation, Related indices,
Assumptions of Terzaghis one dimensional consolidation theory, Time
07 15
factor, One dimensional consolidation tests, Laboratory and theoretical
time curves, Determination of pre-consolidation pressure, Estimation of
consolidation settlement and rate of settlement for uniform pressure
increment in a clay layer.
4 Stability of Slopes: 06 15
Infinite and finite slopes, factor of safety, type of slope failure, stability of
infinite slopes, finite slopes, forms of slip surfaces, limit equilibrium
method and critical stage instability analysis, effects of tension crack and
submergence, C-analysis-method of slices, taylors stability no., Bishops
method.
5 Earth Pressure:
Types of lateral earth pressure, Rankines and Coulombs earth pressure,
Theory and their application for determination of lateral earth pressure 07 20
under different conditions,Rebhanns and Culmanns Graphical methods
of determination of lateral earth pressures.
6 Stress Distribution of Soils: Causes of stress in soil, geostatic
stress,Boussinesques equation, stress distribution diagrams, New-marks
07 15
influence chart Westergards equation, contact pressure, stresses due to
triangular and circular, strip and rectangular loadings.
7 Basics of foundation: Types of foundation, Factors affecting the
02 05
selection of type of foundations, steps in choosing types of foundation.
Suggested Specification table with Marks (Theory):
Distribution of Theory Marks
R Level U Level A Level N Level E Level C Level

20 20 20 25 15 0
Legends: R: Remembrance; U: Understanding; A: Application, N: Analyze and E: Evaluate C: Create and

above Levels (Revised Blooms Taxonomy)
Note: This specification table shall be treated as a general guideline for students and teachers. The actual
distribution of marks in the question paper may vary slightly from above table.
Reference Books:
1) P. Purushothama Raj; Soil Mechanics and Foundation Engineering; Pearson

2) Education.
3) B.C. Punamia; Soil Mechanics & Foundation Engineering; Laxmi Pub. Pvt. Ltd.,
4) Delhi.
5) Alamsingh; Soil Mechanics & Foundation Engineering; CBS Publishers &
6) Distributors, Delhi
7) Taylor D.W.; Fundamentals of Soil Mechanics; Asia Publishing House, Mumbai
8) V. N. S. Murthy; Soil Mechanics & Foundation Engineering; Sai Kripa Technical
9) Consultants, Banglore
10) Gopal Ranjan, Rao A.S.R.; Basic and applied soil mechanics; New age int. (p) ltd.
11) Arora K.R.; Soil Mechanics & Foundation Engineering; Standard Pub., Delhi
12) Das Braja M; Principles of Geotechnical Engineering; Thomson Asia Pvt. Ltd.
Course Outcome:
After learning the course the students should be able to:
1. This course will provide good understanding of various index (preliminary) and engineering
properties of soil, its determination through various methodology and application for design of
shallow and deep foundation systems for various civil engineering structures.
2. The course covers various topics like compaction, shear strength, consolidation, earth pressure,
stress distribution which gives insight to students to analyise soil parameters based on application
and need of project site.
3. The course will also develop understanding about soil testing procedures, experimentation
techniques and related issues. Simulation of mechanics on soil as a material to understand its
behaviour before failure and estimating its permissible values.
4. The course also discusses details of foundations, its selection procedures as per soil conditions
and various modifications available for various degrees of loads.
List of Experiments/Tutorials:
1. Proctor Compaction Test

2. CBR Test
3. Consolidation /Oedometer test
4. Direct Shear Test
5. Unconfined Compression Test
6. Demonstration of Triaxial test
7. Auger boring/sampling
8. Free swill and swell potential
Open Ended Problems:
Apart from above tutorials/experiments a group of students has to undertake one open ended problem
using sub-soil profile of their local city . Few examples of the same are given below:
1. Development of spread sheets/computer programmes for the determination of shear parameters using
Mohr circle.
2. Power point presentation on any one of the above topic supported with one field application/case study.
List of Open Source Software/learning website:

http://nptel.ac.in/
http://ocw.mit.edu/courses/civil-and-environmental-engineering/
ACTIVE LEARNING ASSIGNMENTS: Preparation of power-point slides, which include videos,

animations, pictures, graphics for better understanding theory and practical work The faculty will
allocate chapters/ parts of chapters to groups of students so that the entire syllabus to be covered. The
power-point slides should be put up on the web-site of the College/ Institute, along with the names of the
students of the group, the name of the faculty, Department and College on the first slide. The best three
works should submit to GTU.

Gujarat Technological University: Civil Engineering SUBJECT CODE: 2150609

Uploaded by

Copyright:

Available Formats

Gujarat Technological University: Civil Engineering SUBJECT CODE: 2150609

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Gujarat Technological University: Civil Engineering SUBJECT CODE: 2150609

Uploaded by

Copyright:

Available Formats

GUJARAT TECHNOLOGICAL UNIVERSITY

Sr. Total Module

Suggested Specification table with Marks (Theory):

Distribution of Theory Marks

R Level U Level A Level N Level E Level C Level

Legends: R: Remembrance; U: Understanding; A: Application, N: Analyze and E: Evaluate C: Create and

1) P. Purushothama Raj; Soil Mechanics and Foundation Engineering; Pearson

After learning the course the students should be able to:

1. Proctor Compaction Test

Open Ended Problems:

List of Open Source Software/learning website:

ACTIVE LEARNING ASSIGNMENTS: Preparation of power-point slides, which include videos,

You might also like