Knowles MLC Catalogue 2016

MLC
Capacitors
Introduction to Knowles Capacitors
At Knowles Capacitors we make Single Layer, Multilayer,

High Reliability and Precision Variable Capacitors; EMI Filters
and Thin Film Devices.
Our business was formed by combining Dielectric

Laboratories, Novacap, Syfer Technology and Voltronics
into a single organization - each well-established specialty
capacitor makers with a combined history of over 175 years.
Our expertise is the design and manufacture of components

important to engineers in applications where function and
reliability are key. The markets we serve include medical
implantable and medical equipment, military, aerospace/
avionics, EMI and connector filtering, oil exploration,
instrumentation, industrial electronics, optical networks,
telecom and automotive.
We aim to be a leader in every market we serve, to

the benefit of our customers and our mutual long-
term success. We achieve this by:
l Understanding our customers real needs and providing

products and services to meet and exceed them.
l Providing better products and services than competitors.
l Investing in product development, manufacturing

processes and people.
l Insisting on the highest ethical standards and a business

culture of trust, respect and open communication.
Products in this catalogue form the basis of our ranges for

new designs. However, there are legacy products from our
four brands that will still be available we ask that you
contact your local Sales Office for details and ordering.
Product Selector
Medical
RF
High Frequency
Snubber
Frequency Control/Tuning,
Impedance Matching
Capacitors Modem/Tip and Ring
and Decoupling/Smoothing
Filters AC Noise Removal
SM and High Voltage Circuitry
Leaded High Speed Decoupling
Feedthrough Filtering
Automotive
Harsh Environments
Mil/Aero
is particularly recommended
for these applications where
possible.
X7R, C0G/NP0, High Q & Ultra-low ESR
0402 to 4040 non-magnetic termination Pages 68-71
0.1pF to 6.8F - 16V to 3kV
High Q, C0G/NP0 & Porcelain Range

Ultra-low ESR Pages 40-52
MRI/Non-Magnetic
C0G/NP0 Range Pages 30-33
0402 to 8060
0.47pF to 1F - 10V to 12kV & 36-37
Class 1 Dielectrics
Low DF/ESR X7R
1812/2220/2225
Pages 24-25
100nF to 1F - 250Vdc & 60-61
Class 1 Dielectrics
X7R, C0G/NP0 Y2/X1, X2
Safety Certified Ranges UL/TV Pages 65-67
1808/1812/2211/2215/2220
High Capacitance
X7R/X5R Ranges Pages 24-25
0603 to 8060
100pF to 22F - 16V to 12kV & 60-61
Safety Certified
X7R, E03 X2Y IPCs
0603 to 1812 Pages 92-95
150pF to 1.2F - 16V to 1kV
High Capacitance
X7R, C0G/NP0, Y2/X1, X2
Safety Certified Ranges UL/TV Pages 65-67
1808/1812/2211/2215/2220
Balanced Line Capacitors

X7R, C0G/NP0 Ranges
250Vac rated 50/60Hz AC
Page 64
Safety Certified
StackiCap Page 62
250Vac Range
0505/1111/1825 Ranges
X7R, C0G/NP0, High Q Page 40
PCB Space Saving

X7R and C0G/NP0, E03 X2Y IPCs
0603 to 2220 Pages 92-95
10pF to 1.2F
Low Inductance Capacitors
E01/E07/SBSGC/SBSMC
X7R, C0G/NP0 Pages 92-95
0805 to 2220 - 1A to 20A
Capacitive
SBSP/SBSG/SBSM
X7R, C0G/NP0 1206 to 2220 Pages 92-95
22pF to 470nF - 1A to 10A
Capacitive/Inductive Pi
AEC-Q200 E03 X2Y IPCs
X7R and C0G/NP0 AEC-Q200 E01/E07 Pages 92-95
Feedthrough Capacitors
Filtering
Open Mode and Tandem
FlexiCap Capacitors Page 56
with extra safe electrode design
MLCC
AEC-Q200 Ranges
X7R, C0G/NP0
Pages 58-59
High Temperature
X8R Range
Operational temperature up to 150C
Page 74
Dipped Radial Leaded
Capacitors
Class I & II High Temperature
160C and 200C
Page 75
High Reliability
Capacitors and Filters
X7R, C0G/NP0
4.7pF to 22F - 50V to 12kV
Pages 83-91
115Vac 400Hz range Pages 57, 72,

S02A/IECQ-CECC/MIL-PRF/Burn in
Hi Rel X2Y IPCs 94 & 95
Contents
General & Dielectric classifications and characteristics.............................................................................2-5
Technical Termination types including FlexiCap....................................................................................6-7
Manufacturing processes..........................................................................................................8
Introduction
Testing....................................................................................................................................9
IECQ-CECC and AEC-Q200 Periodic Tests.................................................................................10
High Reliability Testing............................................................................................................11
Regulations and Compliance...................................................................................................12
Explanation on Ageing of MLC.................................................................................................13
Handling, Storage, Soldering and Mechanical Precautions..................................................... 14-16
Chip Marking System..............................................................................................................17
Packaging Information - Ceramic chip capacitors................................................................. 18-19
Chip Dimensions....................................................................................................................20
MLCC Ordering Chip Ordering Information..................................................................DLI..............................21

Chip Ordering Information..................................................................Novacap......................22
Information
Chip Ordering Information..................................................................Syfer............................23
MLC Quick Reference Guide.......................................................................Novacap-Syfer.......24-25

Industry Standard - X7R.....................................................................Novacap-Syfer.......26-29
Capacitors
Industry Standard - C0G/NP0..............................................................Novacap-Syfer.......30-33
Other Popular Sizes - X7R...................................................................Novacap-Syfer.......34-35
Other Popular Sizes - C0G/NP0............................................................Novacap-Syfer.......36-37
Standard Chip - BX.............................................................................Novacap..................... 38
Improved ESR - BX & X7R...................................................................Novacap..................... 39
High Q - Q(MS) & U ranges.................................................................Syfer......................40-42
High Q - H range - High Temperature 150C - X8G...............................Syfer..................... 43-44
High Q - High Power RF - Surface Mount & Ribbon Leaded....................Syfer..................... 45-46
High Q Porcelain - CF Series - C0G/NP0...............................................DLI......................... 47-49
High Q Porcelain - AH Series - P90......................................................DLI.........................50-52
VC1 Residual - X7R.............................................................................Syfer.......................... 53
TCC/VCC range - (BX & BZ) X7R..........................................................Syfer......................54-55
Open Mode and Tandem.....................................................................Syfer.......................... 56
IECQ-CECC range...............................................................................Syfer.......................... 57
Automotive Grade - AEC-Q200 range - MLC, EMI & X2Y........................Syfer......................58-59
High Capacitance - X7R & X5R............................................................Novacap.................60-61
StackiCap.......................................................................................Syfer.......................... 62
NC range - X7R..................................................................................Syfer.......................... 63
250Vac rated 50/60Hz AC...................................................................Syfer.......................... 64
250Vac Safety Certified AC..................................................................Syfer......................65-67
Non-Magnetic - High Q, C0G/NP0 & X7R..............................................Syfer-Voltronics.....68-69
Non-Magnetic - High Power RF - High Q..............................................Syfer-Voltronics..... 68-69
Non-Magnetic - High Power RF - High Q - Porcelain P90 & C0G/NP0......Voltronics............... 70-71
115Vac 400Hz - C0G/NP0 & X7R.........................................................Syfer.......................... 72
DWV (High Dielectric Withstand Voltage) range - C0G/NP0 & X7R..........Syfer.......................... 73
High Temperature - X8R - 150C.........................................................Novacap-Syfer........... 74
High Temperature - C0G/NP0 & Class II - 160C & 200C.....................Novacap..................... 75
HiT range of 200C Caps - C0G/NP0 & X7R..........................................Novacap-Syfer........... 76
Capacitor Assemblies - ST & SM ranges - C0G/NP0 & X7R.....................Novacap.................77-81
Capacitor Assemblies - Cap-Rack Arrays.............................................Novacap..................... 82
MLC Radial Radial Leaded - Ordering Information..................................................Novacap-Syfer........... 83

Standard Radial Leaded - C0G/NP0, X7R & X8R....................................Novacap.................84-85
Leaded
Standard Radial Leaded - C0G/NP0, X7R..............................................Syfer......................86-89
Capacitors High Temperature Radial Leaded - Epoxy Coated.................................Novacap..................... 90
High Temperature Radial Leaded - Encapsulated..................................Novacap..................... 91
SM EMI Filters Feedthrough Filters - E01 & E07..........................................................Syfer......................92-93

X2Y Integrated Passive Components - E03...........................................Syfer......................94-95
Dielectric characteristics
Class I Dielectrics
Multilayer Ceramic Capacitors are generally divided into classes dielectric characteristics with negligible dependence of capacitance
which are defined by the capacitance temperature characteristics and dissipation factor with time, voltage and frequency. They
over specified temperature ranges. These are designated by alpha exhibit the following characteristics:-
numeric codes. Code definitions are summarised below and are also
a) Time does not significantly affect capacitance and dissipation
available in the relevant national and international specifications.
factor (Tan ) no ageing.
Capacitors within this class have a dielectric constant range from b) Capacitance and dissipation factor are not affected by voltage.
10 to 100. They are used in applications which require ultra stable c) Linear temperature coefficient.
Class I Dielectrics
C0G/NP0 P90 Class I

C0G/NP0 X8G
(Porcelain) (Porcelain) High Temperature
Ultra stable Ultra stable Ultra stable Ultra stable Ultra stable
Dielectric IECQ-CECC - - 1B/CG - - -

classifications EIA C0G/NP0 P90 C0G/NP0 X8G - -
MIL - - CG (BP) - - -
DLI CF AH - - - - -
Novacap - - - N - F D, RD
Ordering code
Syfer - - Q, U C H - G
Voltronics F H Q - - - -
Rated
-55C to -55C to -55C to -55C to -55C to -55C to -55C to
temperature
+125C +125C +125C +125C +150C +160C +200C
range
Maximum No DC voltage
0 15 ppm/C 20 ppm/C 0 30 ppm/C 30 ppm/C 0 30 ppm/C 0 30 ppm/C 0 30 ppm/C
capacitance applied
change over
temperature Rated DC
-
range voltage applied
>50pF <0.0015
Tangent of loss 0.0005
0.05 <50pF 0.0015 (15 + 0.7) <0.001
angle (tan ) @1MHz
Cr
@25C = 100G or 1000F

Insulation Time constant @25C = 106 M min 100G or 1000s
@160C & 200C = 1G or 10F
resistance (Ri) (Ri x Cr) @125C = 105 M min (whichever is the least)
(whichever is the least)
Cr <4.7pF 0.05pF, 0.10pF, 0.25pF, 0.5pF

Capacitance Cr >4.7 to
0.10pF, 0.25pF, 0.5pF
Tolerance <10pF
Cr >10pF 1%, 2%, 5%, 10%
<200V 2.5 times 2.5 times

Dielectric
strength >200V to
2.5 times Rated voltage + 250V Rated voltage + 250V
Voltage applied <500V
for 5 seconds.
500V to <1kV 2.5 times 1.5 times 2.5 times 1.5 times
Charging
current limited >1kV to
to 50mA 1.25 times 1.25 times
<1.2kV
maximum. N/A
>1.2kV 1.2 times 1.2 times
Chip 55/125/56 55/125/56 55/125/56 - -

Climatic
Dipped - - - 55/125/21 - -
category (IEC)
Discoidal - - - 55/125/56 - -
Ageing
characteristic Zero
(Typical)
Approvals Syfer Chip - - - QC-32100 - -
2 www.knowlescapacitors.com
Class II Dielectrics
Capacitors of this type have a dielectric constant range of 1000- Capacitance and dissipation factor are affected by:-
4000 and also have a non-linear temperature characteristic which
a) Time (Ageing)
exhibits a dielectric constant variation of less than 15% (2R1)
b) Voltage (AC or DC)
from its room temperature value, over the specified temperature
c) Frequency
range. Generally used for by-passing (decoupling), coupling,
filtering, frequency discrimination, DC blocking and voltage transient
suppression with greater volumetric efficiency than Class I units,
whilst maintaining stability within defined limits.
Class II Dielectrics
Class II
X5R X7R X8R
High Temperature
Stable Stable Stable Stable
- 2C1 2R1 2X1 - - - IECQ-CECC Dielectric

X5R - X7R - X8R - - EIA classifications
- BZ - BX - - - MIL
- - - - - - - DLI
BW - B X S G E, RE Novacap
Ordering code
P R X B N - X Syfer
- - X - - - - Voltronics
Rated
-55C to -55C to -55C to -55C to -55C to
temperature
+85C +125C +150C +160C +200C
range
No DC voltage Maximum
15% 15% 15% 15% 15% +15 -40% +15 -65%
applied capacitance
change over
Rated DC temperature
- +15 -45% - +15 -25% - - -
voltage applied range
0.025 >25V <0.025 Tangent of loss

<0.025 <0.025
Typical* <25V <0.035 angle (tan )
100G or 1000s Time constant Insulation

(whichever is the least) (Ri x Cr) resistance (Ri)
Capacitance
5%, 10%, 20%
Tolerance
2.5 times 2.5 times <200V Dielectric

strength
>200V to Voltage applied
Rated voltage + 250V Rated voltage + 250V
<500V for 5 seconds.
2.5 times 2.5 times
Charging
1.5 times 1.5 times 500V to <1kV current limited
to 50mA
1.2 times 1.2 times >1kV maximum.
55/85/56 55/125/56 55/150/56 - Chip

Climatic
- 55/125/21 - - Dipped
category (IEC)
- 55/125/56 - - Discoidal
Ageing
5%
<2% per time decade characteristic
Typical
(Typical)
- QC-32100 - - - QC-32100 - Syfer Chip Approvals
* Refer to page 61 for details of Dissipation Factor.
www.knowlescapacitors.com 3
Typical dielectric temperature characteristics Impedance vs Frequency
Ultra Stable C0G/NP0 dielectric
Porcelain C0G/NP0 & P90
1.25 100000000
10000000
10pF 100pF
Impedance (Ohms)
1 C0G/NP0 Porcelain 1000000
1nF 10nF
P90 Porcelain 100000
Capacitance Change %
0.75
10000
0.5 1000
100
0.25 10
1
0
0.1
0.01
-0.25 0.001 0.01 0.1 1 10 100 1000 10000
-0.5 Frequency (MHz)
-0.75 Stable X7R dielectric Stable X7R dielectric
-1
1000000
-55 -40 -20 0 20 40 60 80 100 125
100000
Temperature (C) 1nF 10nF
Impedance (Ohms)
C0G/NP0 10000 100nF 1F
1000
50 100
UPPER LIMIT 10
1
25 TYPICAL LIMIT
0.1
0.01
C ppm/C
0.001 0.01 0.1 1 10 100 1000 10000
0 Frequency (MHz)
Stable X7R dielectric - 10nFStable X7R dielectric 10nF

-25 100000
LOWER LIMIT
10000 1808 0805
(Ohms)
Impedance (Ohms)
1206 1210
1000
-50
-55 -25 0 25 50 75 100 125 100
Impedance
Temperature (C) 10
X7R 1
20 0.1
15 0.01
0.001 0.01 0.1 1 10 100 1000 10000
Typical capacitance change curves
Capacitance Change %
10 will lie within the shown limits Frequency (MHz)

Frequency (MHz)
5
ESR vs Frequency - chips
0 Ultra Stable C0G/NP0 dielectric
-5
1000
-10
100 100pF
1nF
-15
ESR (Ohms)
10 10nF
-20 1
-55 -35 -15 5 25 45 65 85 105 125
0.1
Temperature (C)
0.01
0.001
0.001 0.01 0.1 1 10 100 1000 10000
Frequency (MHz)
Stable X7R dielectric Stable X7R dielectric
10000
1000 1nF
10nF
100 100nF
ESR (Ohms)
10 1F
0.1
0.01
0.001
0.0001
0.001 0.01 0.1 1 10 100 1000 10000
Frequency (MHz)
Typical ESR and Series Resonance characteristics
Porcelain C0G/NP0 and P90
DLI Cap Typical ESR Series Resonance

Dielectric
Series (pF) (MHz)
150 MHz 500 MHz 1 GHz
1 0.182 0.276 0.428 10300
C06CF
10 0.095 0.159 0.243 3200
0603
47 0.081 0.127 0.173 1400
1 0.073 0.089 0.146 9900
C11CF
10 0.049 0.075 0.107 3100
0505
100 0.040 0.073 0.111 970
1 0.073 0.082 0.124 9060
C17CF 10 0.065 0.098 0.136 3100

1111 100 0.041 0.070 0.102 1300
CF
1000 0.034 0.073 400
TCC (ppm/C)
(-55 to +125C) 1 0.068 0.086 0.158 9060
C18CF
Porcelain 1111
10 0.058 0.087 0.118 3100
(C0G/NP0) 1000 0.041 0.068 1000
0 15 10 0.072 0.113 0.164 2480
C22CF 100 0.047 0.079 0.119 1000

2225 1000 0.036 0.067 320
2700 0.035 214
10MHz 30MHz 100MHz
10 0.121 0.054 0.037 2100
C40CF 100 0.044 0.038 0.045 680

3838 1000 0.032 0.036 0.038 210
5100 0.011 0.016 0.040 95
DLI Cap Typical ESR Series Resonance

Dielectric
Series (pF) (MHz)
150 MHz 500 MHz 1 GHz
1 0.067 0.08 0.136 9200
C11AH
10 0.044 0.071 0.104 3000
0505
100 0.032 0.055 0.086 1000
1 0.059 0.063 0.114 9064
C17AH
10 0.039 0.06 0.085 3100
1111
1000 0.024 0.05 0.074 1290
10 0.059 0.094 0.138 3100
AH C18AH
100 0.028 0.069 0.109 1290
TCC (ppm/C) 1111
(-55 to +125C) 1000 0.023 0.063 400
Porcelain 10 0.074 0.207 0.249 2480
(P90) C22AH 100 0.048 0.116 0.19 1000
+90 20 2225 1000 0.028 0.14 320
2700 0.027 214
10MHz 30MHz 100MHz
15 0.066 0.033 0.027 2100
C40AH 100 0.018 0.026 0.052 680

3838 1000 0.009 0.017 0.033 210
5100 0.008 0.016 0.033 95
Dielectric termination combinations
Ag Termination, Cu Barrier Layer,

Ag Layer, 400-500u-in Cu barrier,
FlexiCap Ag Layer, 400-u-in Cu
Copper Barrier 90/10% tin/lead

FlexiCap with Copper Barrier
FlexiCap with Copper Barrier

Nickel Barrier 90/10% tin/lead
Nickel Barrier (100% matte tin
FlexiCap with Nickel Barrier
FlexiCap with Nickel Barrier
Ag termination, Enhanced Cu
Ni Barrier, Sn Plated Solder
Solderable Palladium Silver
Ag termination, Ni Barrier,
Ag termination, Enhanced
Heavy SnPb Plated Solder
Heavy SnPb Plated Solder

barrier 200-u-in Sn Plate
Copper Barrier 100% tin
Barrier, Sn Plated Solder

Nickel Barrier Gold flash
200-u-in 90/10 Sn Plate

plating). Lead free
Solderable Silver
90/10% tin/lead
90/10% tin/lead
Palladium Silver
Palladium Silver
100% tin
100% tin
RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS
Recommended for Solder

Attachment
Recommended for Conductive
Epoxy Attachment
DLI - P Z U S Q Y M - - W - V - - T E H R
Novacap P PR N Y NG C D - - - B - E S K - - - -
Termination
ordering code:
Syfer - F J A - Y H 3 - 5 2 - 4 - - - - - -
Voltronics - S - - - - - 3 M - 2 W - - - - - - -
Dielectric Code
NP0 Porcelain - Hi Q DLI - CF

P90 Porcelain - Hi Q DLI - AH
C0G - Hi Q/Low ESR Syfer - Q, U
C0G - Hi Q/Low ESR BME Syfer - H
Novacap - N/RN
C0G/NP0 Syfer - A
Syfer - C, F
C0G/NP0 - BME Syfer - G, K
Novacap - M
C0G/NP0 -
Non-Mag
Syfer - C, Q
Voltronics - Q
Syfer - P
X5R
Novacap - BW
Novacap - B/RB
X7R Syfer - E
Syfer - X, D
Novacap - BB
X7R - BME Syfer - J
Syfer - S
Novacap - X
BX
Syfer - B
BZ Syfer - R
Novacap - C
X7R -
Non-Mag
Syfer - X
Voltronics - X
Novacap - S
X8R Syfer - N
Syfer - T
C0G/NP0 (160C) Novacap - F
C0G/NP0 (200C) Novacap - D
Novacap - RD
C0G/NP0 (200C)
Syfer - G
Class II (160C) Novacap - G
Novacap - E
Class II (200C)
Novacap - RE
Dielectric codes in Red - AEC-Q200 qualified. Dielectric codes in Green - IECQ-CECC.
FlexiCap overview
FlexiCap termination working in partnership with customers world wide, to eliminate
MLCCs are widely used in electronic circuit design for a multitude of mechanical cracking.
applications. Their small package size, technical performance and An additional benefit of FlexiCap is that MLCCs can withstand
suitability for automated assembly makes them the component of temperature cycling -55C to 125C in excess of 1,000 times
choice for the specifier. without cracking.
However, despite the technical benefits, ceramic components are FlexiCap termination has no adverse effect on any electrical
brittle and need careful handling on the production floor. In some parameters, nor affects the operation of the MLCC in any way.
circumstances they may be prone to mechanical stress damage if
not used in an appropriate manner. Board flexing, depanelisation, Picture taken at 1,000x
mounting through hole components, poor storage and automatic magnification using a SEM
testing may all result in cracking. to demonstrate the fibrous
nature of the FlexiCapTM
Careful process control is important at all stages of circuit board termination that absorbs
assembly and transportation - from component placement to increased levels of
test and packaging. Any significant board flexing may result in mechanical stress.
stress fractures in ceramic devices that may not always be evident
during the board assembly process. Sometimes it may be the end
customer who finds out - when equipment fails!
Knowles has the solution - FlexiCap

FlexiCap has been developed as a result of listening to customers
experiences of stress damage to MLCCs from many manufacturers, Available on the following ranges:
often caused by variations in production processes. All High Reliability ranges
Our answer is a proprietary flexible epoxy polymer termination Standard and High Voltage Capacitors
material, that is applied to the device under the usual nickel barrier Open Mode and Tandem Capacitors
finish. FlexiCap will accommodate a greater degree of board Safety Certified Capacitors
bending than conventional capacitors. Non-magnetic Capacitors
Knowles FlexiCap termination 3 terminal EMI chips

X2Y Integrated Passive Components
Ranges are available with FlexiCap termination material offering
increased reliability and superior mechanical performance (board X8R High Temperature capacitors
flex and temperature cycling) when compared with standard Summary of PCB bend test results
termination materials. Refer to Knowles application note reference
AN0001. FlexiCap capacitors enable the board to be bent The bend tests conducted on X7R have proven that the FlexiCap
almost twice as much before mechanical cracking occurs. Refer to termination withstands a greater level of mechanical stress before
application note AN0002. mechanical cracking occurs.
FlexiCap is also suitable for Space applications having passed The AEC-Q200 test for X7R requires a bend level of 2mm minimum
thermal vacuum outgassing tests. Refer to Syfer application note and a cap change of less than 10%.
reference AN0026.
Product Typical bend performance under
Fired ceramic
dielectric
X7R AEC-Q200 test conditions
Standard termination 2mm to 3mm
FlexiCap Typically 8mm to 10mm
Metal
Application notes
electrodes
FlexiCap may be handled, stored and transported in the same
Tin outer manner as standard terminated capacitors. The requirements for
layer Intermediate nickel
or copper layer
termination mounting and soldering FlexiCap are the same as for standard
base
SMD capacitors.
FlexiCap MLCC cross section For customers currently using standard terminated capacitors there
should be no requirement to change the assembly process when
FlexiCap benefits converting to FlexiCap.
With traditional termination materials and assembly, the chain Based upon board bend tests in accordance with IEC 60384-1
of materials from bare PCB to soldered termination, provides no the amount of board bending required to mechanically crack a
flexibility. In circumstances where excessive stress is applied - the FlexiCap terminated capacitor is significantly increased compared
weakest link fails. This means the ceramic itself, which may fail with standard terminated capacitors.
short circuit. It must be stressed however, that capacitor users must not
The benefit to the user is to facilitate a wider process window - assume that the use of FlexiCap terminated capacitors will totally
giving a greater safety margin and substantially reducing the typical eliminate mechanical cracking. Good process controls are still
root causes of mechanical stress cracking. required for this objective to be achieved.
FlexiCap may be soldered using your traditional wave or reflow
solder techniques including lead free and needs no adjustment to
equipment or current processes.
Knowles has delivered millions of FlexiCap components and
during that time has collected substantial test and reliability data,
Manufacturing processes
Production process flowchart Knowles reliability grades
Ceramic powder Electrode ink

High reliability
preparation material
(space quality)
Space
Grade
ESCC 3009(1)
MIL Grade
Multilayer build
IECQ-CECC(2)
AEC-Q200(3)
Fire
Standard components Standard
reliability
Rumble Notes:
1) Space grade tested in accordance with ESCC3009 (refer to Knowles
Spec S02A 0100) or MIL Grade (in accordance with MIL-PRF-123, MIL-
DPA inspection PRF-55681).
2) IECQ-CECC. The International Electrotechnical Commission (IEC) Quality
Assessment System for Electronic Components. This is an internationally
recognised product quality certification which provides customers with
Termination assurance that the product supplied meets high quality standards.
View Knowles IECQ-CECC approvals at http://www.iecq.org or at
www.knowlescapacitors.com
3) AEC-Q200. Automotive Electronics Council Stress Test Qualification
For Passive Components. Refer to Knowles application note reference
Plating AN0009.
(if specified)
Printing
(if specified) Knowles reliability surface mount product groups
High reliability
Electrical test Tandem

FlexiCapTM
capacitors(1)
Open Mode
Test verification FlexiCapTM capacitors(2)
Standard FlexiCapTM
capacitors(3)
Standard MLC capacitors(4) Standard

Additional sample reliability
Rel tests
(if specified)
Notes:
1) Tandem construction capacitors, ie internally having the equivalent
of 2 series capacitors. If one of these should fail short-circuit, there is still
capacitance end to end and the chip will still function as a capacitor,
QC inspection
although capacitance maybe affected. Refer to application note AN0021.
Also available qualified to AEC-Q200.
2) Open Mode capacitors with FlexiCapTM termination also reduce the
possibility of a short circuit by utilising inset electrode margins. Refer to
application note AN0022. Also available qualified to AEC-Q200.
Additional Hi Rel
activities 3) Multilayer capacitors with Knowles FlexiCapTM termination. By using
(S02A 100% burn-in, QC insp)
FlexiCapTM termination, there is a reduced possibility of the mechanical
cracking occurring.
4) Standard capacitors includes MLCCs with tin finish over nickel but no
FlexiCapTM.
Packaging
Finished goods store
Testing
Tests conducted during batch manufacture
Knowles reliability SM product group
S (Space grade)
Standard SM IECQ-CECC / High Rel S02A
AEC-Q200
capacitors MIL grade ESCC 3009
MIL-PRF-123
Solderability l l l l
Resistance to soldering heat l l l l
Plating thickness verification (if plated) l l l l
DPA (Destructive Physical Analysis) l l l l
Voltage proof test (DWV / Flash) l l l l
Insulation resistance l l l l
Capacitance test l l l l
Dissipation factor test l l l l
100% visual inspection m m l l
100% burn-in. (2xRV @125C for 168 hours) m m m l
LAT1 & LAT2

Load sample test @ 125C m m l
(1000 hours)
Humidity sample test. 85C/85%RH m m l 240 hours
Hot IR sample test m m m m
Axial pull sample test (MIL-STD-123) m m m m
Breakdown voltage sample test m m m m
Deflection (bend) sample test m m m m
SAM (Scanning Acoustic Microscopy) m m m m
LAT1 (4 x adhesion, 8 x rapid temp change + LAT2 and LAT3) - - - m
LAT2 (20 x 1000 hour life test + LAT3) - - - m
LAT3 (6 x TC and 4 x solderability) - - - m
l Test conducted as standard.

m Optional test. Please discuss with the Sales Office.
IECQ-CECC and AEC-Q200 Periodic tests
Periodic tests conducted for IECQ-CECC and AEC-Q200
Sample
Test acceptance
Test Termination type Additional requirements Reference
ref
P N C
High
temperature Un-powered. 1,000 hours @ T=150C. MIL-STD-202
P1 All types 12 77 0
exposure Measurement at 24 2 hours after test conclusion Method 108
(storage)
Temperature C0G/NP0: All types 1,000 cycles -55C to +125C JESD22

P2 12 77 0
cycling X7R: Y and H only Measurement at 24 2 hours after test conclusion Method JA-104
T = 24 hours/cycle. Note: Steps 7a and 7b not required. Un-

Moisture MIL-STD-202
P3 All types powered. 12 77 0
resistance Method 106
Measurement at 24 2 hours after test conclusion
1,000 hours 85C/85%RH. Rated voltage or 50V

Biased MIL-STD-202
P4 All types whichever is the least and 1.5V. 12 77 0
humidity Method 103
Measurement at 24 2 hours after test conclusion
Operational Condition D steady state TA=125C at full rated. MIL-STD-202

life Measurement at 24 2 hours after test conclusion Method 108
Resistance Note: Add aqueous wash chemical. MIL-STD-202

P6 All types 12 5 0
to solvents Do not use banned solvents Method 215
Mechanical C0G/NP0: All types MIL-STD-202

P7 Figure 1 of Method 213. Condition F 12 30 0
shock X7R: Y and H only Method 213
5gs for 20 minutes, 12 cycles each of 3 orientations.

Note: Use 8 x 5 PCB 0.031 thick 7 secure points on one long
C0G/NP0: All types MIL-STD-202
P8 Vibration side and 2 secure points at corners of opposite sides. Parts 12 30 0
X7R: Y and H only Method 204
mounted within 2 from any secure point.
Test from 10-2,000Hz
Resistance to Condition B, no pre-heat of samples: MIL-STD-202

P9 All types 3 12 0
soldering heat Single wave solder - Procedure 2 Method 210
-55C/+125C. Number of cycles 300.

C0G/NP0: All types MIL-STD-202
P10 Thermal shock Maximum transfer time - 20 seconds, 12 30 0
X7R: Y and H only Method 107
dwell time - 15 minutes. Air-Air
Adhesion,
rapid temp BS EN132100
X7R: A, F and 5N force applied for 10s, -55C/ +125C for 5 cycles,
P11 change and 12 27 0 Clause 4.8, 4.12
J only damp heat cycles
climatic and 4.13
sequence
C0G/NP0: All types 3mm deflection Class I

P12 Board flex 12 30 0 AEC-Q200-005
X7R: Y and H only 2mm deflection Class II
X7R: A, F and BS EN132100

P13 Board flex 1mm deflection. 12 12 0
J only Clause 4.9
Terminal
P14 All types Force of 1.8kg for 60 seconds 12 30 0 AEC-Q200-006
strength
Beam load
P15 All types - 12 30 0 AEC-Q200-003
test
Damp heat 56 days, 40C / 93% RH 15x no volts, 15x 5Vdc, BS EN132100
steady state 15x rated voltage or 50V whichever is the least. Clause 4.14
Test results are available on request.

P = Period in months.
N = Sample size.
C = Acceptance criteria.
High Reliability Testing
Our High Rel products are designed for optimum Military Performance Specifications
reliability and are burned in at elevated voltage
and temperature levels. They are 100% MIL-PRF-55681 (GROUP A) MIL-PRF-123 (GROUP A)
electrically inspected to ascertain conformance to General purpose military high reliability The specification affords an increased
a strict performance criteria. specification for surface mount sizes 0805 reliability level over MIL-PRF-55681 for
Applications for High Reliability products include through 2225 in 50V and 100V. space, missile and other high reliability
medical implanted devices, aerospace, airborne, applications such as medical implantable or
VOLTAGE CONDITIONING
life support equipment. The specification
various military applications, and consumer uses 100 HRS, 2X VDCW, 125C covers surface mount sizes 0805 through
requiring safety margins not attainable with DWV, IR, 125C IR, CAP, DF TEST 2225 in 50V rating and various radial / axial
conventional product. VISUAL & MECH. INSPECTION leaded products in 50V, 100V and 200V
We have the ability to test surface mount and (AQL SAMPLE PLAN) ratings.
leaded capacitors to High Reliability standards as SOLDERABILITY, SAMPLE 13(0) THERMAL SHOCK, 20 CYCLES
detailed below, or to customer SCD. 8% PDA MAXIMUM VOLTAGE CONDITIONING 168/264 HRS,
Military performance specifications are designed 2X VDCW, 125C
and written for the voltage/capacitance ratings of DWV, IR, 125C IR, CAP, DF TEST
the individual product slash numbers associated VISUAL & MECH. INSPECTION SAMPLE
with the specification. 20(0)
Some of the requirements of the military DPA(1)
document may not apply to the High Reliability PDA, 3% (0.1%), 5% (0.2%) MAX(2)
product. The following details the intent of the
individual military specifications available for test MIL-PRF-39014 (GROUP A) MIL-PRF-49467 (GROUP A)
and the deviations that may apply. The specification covers general military General purpose military high reliability
purpose radial / axial leaded and encapsulated specification for radial leaded epoxy coated.
Product voltage ratings outside of the intended
product in 50V, 100V, and 200V ratings. The specification covers sizes 1515 through
military specification will follow the voltage test 13060 with 600V, 1kV, 2kV, 3kV, 4kV and 5kV
potential outlined. THERMAL SHOCK, 5 CYCLES
ratings.
VOLTAGE CONDITIONING 96 HRS,
Contact the Sales Office with any requirements or THERMAL SHOCK, 5 CYCLES
2X VDCW, 125C
deviations that are not covered here. VOLTAGE CONDITIONING 96 HRS,
DWV, IR, 125C IR, CAP, DF TEST
VISUAL & MECH. INSPECTION RATED VDCW, 125C
(AQL SAMPLE PLAN) PARTIAL DISCHARGE (OPTION) (3)
Environmental Testing DWV, IR, 125C IR, CAP, DF TEST
SOLDERABILITY, SAMPLE 13(0)
VISUAL & MECH. INSPECTION SAMPLE
We also have the capability to perform all 8% PDA MAXIMUM
13(0)
the Environmental Group B, Group C and SOLDERABILITY, SAMPLE 5(0)
Qualification testing to the referenced 10% PDA MAXIMUM
military specifications.
Testing abilities include the following: MIL-PRF-49470 (DSCC 87106) MIL-PRF-38534
(GROUP A) Specification for Hybrid Microcircuits with a
Nondestructive internal examination General purpose military high reliability section for Element Evaluation on passive
Destructive physical analysis specification for stacked and leaded capacitors components.
for switch mode power supplies. The There are two classification levels of
Radiographic inspection
specification covers sizes 2225 through 120200 reliability. Class H is for a standard
Terminal strength in 50V, 100V, 200V and 500V ratings. military quality level. Class K is for the
Resistance to soldering heat highest reliability level intended for space
THERMAL SHOCK, 5 CYCLES
application.
Voltage-temperature limits VOLTAGE CONDITIONING 96 HRS,
Knowles will perform a 100-hour burn-in
Temperature coefficient 2X VDCW(4), 125C
on all Class K products and assumes Class
DWV, IR, 125C IR, CAP, DF TEST K Subgroup 3 samples will be unmounted
Moisture resistance
VISUAL & MECH. INSPECTION SAMPLE 13(0) and Subgroup 4 (wirebond) shall not apply
Humidity, steady state, low voltage SOLDERABILITY, SAMPLE 5(0) unless otherwise stated.
Vibration 10% PDA MAXIMUM
Resistance to solvents
Life TEST VOLTAGE (VDC) WVDC DWV V/C*
This test potential shall be used on all High <200 2.5X Rated 2.0X Rated
Thermal shock and immersion
Reliability Testing unless otherwise specified. 250 500V 400V
Low temperature storage
300 500V 400V
Barometric pressure
400 600V 500V
Shock, specified pulse
500 750V 600V
Mechanical shock
600 750V 600V
Constant acceleration *V/C Is Voltage Conditioning. >700 1.2X Rated 1.0X Rated
Wire bond evaluation
Notes:
Partial discharge (corona)
1. MIL-PRF-123 DPA shall be per TABLE XIV AQL requirements unless otherwise specified.
200C Voltage Conditioning
2. MIL-PRF-123 allowable PDA shall be 3% overall and 0.1% in the last 48 hours for capacitance/voltage
values listed in MIL-PRF-123, and be 5% overall and 0.2% in the last 48 hours for capacitance/voltage
values beyond MIL-PRF-123.
3. MIL-PRF-49467 standard Group A is without Partial Discharge. Partial Discharge test is optional and must
be specified.
4. MIL-PRF-49470 (DSCC 87106) 500V rated product has Voltage Conditioning at 1.2X VDCW.
Regulations and Compliance
Release documentation Knowles reliability SM product group
Standard SM AEC-Q200 S (Space grade)
IECQ-CECC
capacitors MIL grade High Rel S02A
Certificate of conformance l - l l
IECQ-CECC Release certificate of conformity - l - -
Included in
Batch electrical test report m m m
data pack
S (space grade) data documentation package - - - l
l Release documentation supplied as standard.
m Original documentation.
Periodic tests conducted and reliability data availability

Standard Surface Mount capacitors Example of FIT (Failure In Time) data available:
Components are randomly selected on a sample basis and the
10000
following routine tests are conducted:
RV 50% of RV
l Load Test. 1,000 hours @125C (150C for X8R). Applied
25% of RV 10% of RV
voltage depends on components tested.
10
l Humidity Test. 168 hours @ 85C/85%RH.
FIT
l Board Deflection (bend test).
0.01
Test results are available on request.
Conversion factors
From To Operation 0.00001
25C 50C 75C 100C 125C
FITS MTBF (hours) 10 FITS
9
FITS MTBF (years) 109 (FITS x 8760)

Component type: 0805 (C0G/NP0 and X7R).
FITS = Failures in 10 hours.

9 Testing location: Knowles reliability test department.
MTBF = Mean time between failures. Results based on: 16,622,000 component test hours.
REACH (Registration, Evaluation, Authorisation and for special exceptions) and those with plated terminations are
restriction of Chemicals) statement suitable for soldering using common lead free solder alloys (refer
to Soldering Information for more details on soldering limitations).
The main purpose of REACH is to improve the protection of human Compliance with the EU RoHS directive automatically signifies
health and the environment from the risks arising from the use of compliance with some other legislation (e.g. China and Korea
chemicals. RoHS). Please refer to the Knowles Capacitors Sales Office for
Knowles maintains both ISO14001, Environmental Management details of compliance with other materials legislation.
System and OHSAS 18001 Health and Safety Management System
Breakdown of material content, SGS analysis reports and tin
approvals that require and ensure compliance with corresponding
whisker test results are available on request.
legislation such as REACH.
For further information, please contact the Knowles Capacitors Most Knowles MLCC components are available with non RoHS
Sales Office at www.knowlescapacitors.com compliant tin lead (SnPb) solderable termination finish for exempt
applications and where pure tin is not acceptable. Other tin free
RoHS compliance termination finishes may also be available please refer to the
Knowles Capacitors Sales Office for further details.
Knowles routinely monitors world wide material restrictions (e.g. Radial components have tin plated leads as standard but tin/lead is
EU/China and Korea RoHS mandates) and is actively involved in available as a special option. Please refer to the radial section of the
shaping future legislation. catalogue for further details.
All standard C0G/NP0, X7R, X5R and High Q Knowles MLCC X8R ranges <250Vdc are not RoHS 2011/65/EU compliant. Check
products are compliant with the EU RoHS directive (see below the website, www.knowlescapacitors.com for latest RoHS update.
Export controls and dual-use regulations

Certain Knowles catalogue components are defined as dual-use and a capacitance value of >250nF when measured at 750Vdc
items under international export controls - those that can be used and a series inductance <10nH. Components defined as dual-use
for civil or military purposes which meet certain specified technical under the above criteria may require a licence for export across
standards. international borders. Please contact the Sales Office for further
The defining criteria for a dual use component with respect to information on specific part numbers.
Knowles Capacitor products is one with a voltage rating of >750Vdc
Explanation of Ageing of MLC
Ageing Capacitance measurements
Capacitor ageing is a term used to describe the negative, Because of ageing it is necessary to specify an age for reference
logarithmic capacitance change which takes place in ceramic measurements at which the capacitance shall be within the
capacitors with time. The crystalline structure for barium titanate prescribed tolerance. This is fixed at 1000 hours, since for practical
based ceramics changes on passing through its Curie temperature purposes there is not much further loss of capacitance after this
(known as the Curie Point) at about 125C. This domain structure time.
relaxes with time and in doing so, the dielectric constant reduces All capacitors shipped are within their specified tolerance at the
logarithmically; this is known as the ageing mechanism of the standard reference age of 1000 hours after having cooled through
dielectric constant. The more stable dielectrics have the lowest their Curie temperature.
ageing rates.
The ageing curve for any ceramic dielectric is a straight line when
The ageing process is reversible and repeatable. Whenever the plotted on semi-log paper.
capacitor is heated to a temperature above the Curie Point the
ageing process starts again from zero.
Capacitance vs time
The ageing constant, or ageing rate, is defined as the percentage (Ageing X7R @ <2% per decade)
loss of capacitance due to the ageing process of the dielectric
which occurs during a decade of time (a tenfold increase in age)
and is expressed as percent per logarithmic decade of hours. As
the law of decrease of capacitance is logarithmic, this means that
in a capacitor with an ageing rate of 1% per decade of time, the
capacitance will decrease at a rate of:
a) 1% between 1 and 10 hours
b) An additional 1% between the following 10 and 100 hours c %
c) An additional 1% between the following 100 and 1000 hours
d) An additional 1% between the following 1000 and 10000
C0G/NP0
hours etc
e) The ageing rate continues in this manner throughout the
capacitors life.
Typical values of the ageing constant for our Multilayer Ceramic 1 10 100 1000 10000
Capacitors are:
Age (Hours)
Dielectric class Typical values Tight tolerance

One of the advantages of Knowles unique wet process of
Ultra Stable C0G/NP0 Negligible capacitance loss
manufacture is the ability to offer capacitors with exceptionally tight
through ageing
capacitance tolerances.
Stable X7R <2% per decade of time The accuracy of the printing screens used in the fully automated,
computer controlled manufacturing process allows for tolerance as
close as +/-1% on C0G/NP0 parts greater than or equal to 10pF.
For capacitance values below <4.7pF, tolerances can be as tight as
+/-0.05pF.
Mounting, Soldering, Storage & Mechanical Precautions
Detailed application notes intended to guide and assist our less than the chip width. In addition, the position of the chip on the
customers in using multilayer ceramic capacitors in surface board should also be considered.
mount technology are available on the Knowles website www.
3-Terminal components are not specifically covered by IPC-7351,
knowlescapacitors.com
but recommended pad dimensions are included in the Knowles
The information concentrates on the handling, mounting, catalogue / website for these components.
connection, cleaning, test and re-work requirements particular to
Alternative Printed Wire Board Land Patterns
MLCs for SMD technology, to ensure a suitable match between
component capability and user expectation. Some extracts are Printed Wire Board land pattern design for chip components is
given below. critical to ensure a reliable solder fillet, and to reduce nuisance
type manufacturing problems such as component swimming and
Mechanical considerations for mounted ceramic chip
capacitors tombstoning. The land pattern suggested can be used for reflow
and wave solder operations as noted. Land patterns constructed
Due to their brittle nature, ceramic chip capacitors are more prone with these dimensions will yield optimized solder fillet formation and
to excesses of mechanical stress than other components used in thus reduce the possibility of early failure.1
surface mounting.
A = (Max Length) + 0.030 (.762mm)*
One of the most common causes of failure is directly attributable B = (Max Width) + 0.010 (.254mm)**
to bending the printed circuit board after solder attachment. C = (Min Length) 2 (Nominal Band)***
The excessive or sudden movement of the flexible circuit board
stresses the inflexible ceramic block causing a crack to appear at
the weakest point, usually the ceramic/termination interface. The
crack may initially be quite small and not penetrate into the inner
electrodes; however, subsequent handling and rapid changes in
temperature may cause the crack to enlarge.
This mode of failure is often invisible to normal inspection
* Add 0.030 for Wave Solder operations.
techniques as the resultant cracks usually lie under the capacitor ** Replace Max Width with Max Thickness for vertical mounting.
terminations but if left, can lead to catastrophic failure. More *** C to be no less than 0.02, change A to (Max Length) + 0.020.
importantly, mechanical cracks, unless they are severe may not be
detected by normal electrical testing of the completed circuit, failure For C04 C to be no less than 0.01.
only occurring at some later stage after moisture ingression. 1. Frances Classon, James Root, Martin Marietta Orlando
The degree of mechanical stress generated on the printed circuit Aerospace, Electronics Packaging and Interconnection Handbook.
board is dependent upon several factors including the board
MLC Orientation - Horizontal and Vertical Mounting
material and thickness; the amount of solder and land pattern.
The amount of solder applied is important, as an excessive amount The orientation of the MLC relative to the ground plane affects the
reduces the chips resistance to cracking. devices impedance. When the internal electrodes are parallel to
the ground plane (Horizontal mounting) the impedance of the MLC
It is Knowless experience that more than 90% are due to board
resembles a folded transmission line driven from one end.
depanelisation, a process where two or more circuit boards are
separated after soldering is complete. Other manufacturing stages The graphs below show the modeled insertion loss and parallel
that should be reviewed include: resonances of Knowles product C17AH101K-7UN-X0T with
horizontal mounting (modeling can be done in CapCad). When the
1) Attaching rigid components such as connectors, relays, display
internal electrodes are perpendicular to the ground plane (Vertical
panels, heat sinks etc.
mounting, bottom graph) the MLC impedance resembles a folded
2) Fitting conventional leaded components. Special care must transmission line driven from the center reducing resonance effects.
be exercised when rigid terminals, as found on large can Horizontal Orientation
electrolytic capacitors, are inserted. C17AH101K-7UN-X0T 100.0pF Temp = 25C
0
3) Storage of boards in such a manner which allows warping.
-1
4) Automatic test equipment, particularly the type employing bed -2

S21 (dB)
of nails and support pillars. -3
5) Positioning the circuit board in its enclosure especially where -4
this is a snap-fit. -5
Knowles were the first MLCC manufacturer to launch a flexible -6

0 1 2 3 4 5 6 7 8 9 10
termination to significantly reduce the instances of mechanical Frequency (GHz)
cracking. FlexiCap termination introduces a certain amount of give

into the termination layer absorbing damaging stress. Unlike similar Vertical Orientation
C17AH101K-7UN-X0T 100.0pF Temp = 25C
systems, FlexiCap does not tear under tension, but absorbs the 0
stress, so maintaining the characteristics of the MLCC.
-1
SM Pad Design -2
S21 (dB)
Knowles conventional 2-terminal chip capacitors can generally -3
be mounted using pad designs in accordance with IPC-7351, -4
Generic Requirements for Surface Mount Design and Land Pattern -5
Standards, but there are some other factors that have been shown
-6
to reduce mechanical stress, such as reducing the pad width to 0 1 2 3 4 5 6 7 8 9 10
Frequency (GHz)
Knowles MLCCs are compatible with all recognised soldering / Wave soldering Surface Mount Chip Capacitors
mounting methods for chip capacitors.
Wave soldering is generally acceptable, but the thermal stresses
Specific application notes on mounting and soldering Knowles caused by the wave have been shown to lead to potential problems
components are included on the website for each brand. with larger or thicker chips. Particular care should be taken when
soldering SM chips larger than size 1210 and with a thickness
For DLI brand components please see DLI application
greater than 1.0mm for this reason. 0402 size components are
note Recommended Solder Attachment Techniques for MLC
not suitable for wave soldering. 0402 size components can also
Chip and Pre-Tinned Capacitors located at: http://www.
be susceptible to termination leaching and reflow soldering is
knowlescapacitors.com/dilabs/en/gn/resources/
recommended for this size MLCC.
application-notes
Wave soldering exposes the devices to a large solder volume, hence
For Syfer brand components, please see Syfer application
the pad size area must be restricted to accept an amount of solder
note AN0028 Soldering / Mounting Chip Capacitors, Radial
which is not detrimental to the chip size utilized. Typically the pad
Leaded Capacitors and EMI Filters located at: http://www.
width is 66% of the component width, and the length is .030 (.760
knowlescapacitors.com/syfer/en/gn/technical-info/
mm) longer than the termination band on the chip. An 0805 chip
application-notes
which is .050 wide and has a .020 termination band therefore
For Novacap brand products please refer to the appropriate requires a pad .033 wide by .050 in length. Opposing pads should
application note located at: http://www.knowlescapacitors. be identical in size to preclude uneven solder fillets and mismatched
com/novacap/en/gn/technical-info/application-notes surface tension forces which can misalign the device. It is preferred
that the pad layout results in alignment of the long axis of the chips
The volume of solder applied to the chip capacitor can influence at right angles to the solder wave, to promote even wetting of all
the reliability of the device. Excessive solder can create thermal terminals. Orientation of components in line with the board travel
and tensile stresses on the component which can lead to fracturing direction may require dual waves with solder turbulence to preclude
of the chip or the solder joint itself. Insufficient or uneven solder cold solder joints on the trailing terminals of the devices, as these
application can result in weak bonds, rotation of the device off line are blocked from full exposure to the solder by the body of the
or lifting of one terminal off the pad (tombstoning). The volume of capacitor.
solder is process and board pad size dependent.
The pre-heat ramp should be such that the components see a
Soldering methods commonly used in industry are Reflow Soldering, temperature rise of 1.5C to 4C per second as for reflow soldering.
Wave Soldering and, to a lesser extent, Vapour Phase Soldering. This is to maintain temperature uniformity through the MLCC and
All these methods involve thermal cycling of the components and prevent the formation of thermal gradients within the ceramic. The
therefore the rate of heating and cooling must be controlled to preheat temperature should be within 120C maximum (100C
preclude thermal shocking of the devices. preferred) of the maximum solder temperature to minimise thermal
Without mechanical restriction, thermally induced stresses are shock. Maximum permissible wave temperature is 270C for SM
released once the capacitor attains a steady state condition. chips. Total immersion exposure time for Sn/Ni terminations is 30s
Capacitors bonded to substrates, however, will retain some stress, at a wave temperature of 260C. Note that for multiple soldering
due primarily to the mismatch of expansion of the component to operations, including the rework, the soldering time is cumulative.
the substrate; the residual stress on the chip is also influenced by The total immersion time in the solder should be kept to a
the ductility and hence the ability of the bonding medium to relieve minimum. It is strongly recommended that plated terminations
the stress. Unfortunately, the thermal expansion of chip capacitors are specified for wave soldering applications. PdAg termination
differ significantly from those of most substrate materials. is particularly susceptible to leaching when subjected to lead
Large chips are more prone to thermal shock as their greater free wave soldering and is not generally recommended for this
bulk will result in sharper thermal gradients within the device application.
during thermal cycling. Large units experience excessive stress if Cooling to ambient temperature should be allowed to occur
processed through the fast cycles typical of solder wave or vapour naturally, particularly if larger chip sizes are being soldered. Natural
phase operations. cooling allows a gradual relaxation of thermal mismatch stresses
Reflow soldering Surface Mount Chip Capacitors in the solder joints. Forced cooling should be avoided as this can
induce thermal breakage.
Knowles recommend reflow soldering as the preferred method for
mounting MLCCs. Knowles MLCCs can be reflow soldered using Vapour phase soldering Chip Capacitors
a reflow profile generally as defined in IPC / JEDEC J-STD-020. Vapour phase soldering can expose capacitors to similar thermal
Sn plated termination chip capacitors are compatible with both shock and stresses as wave soldering and the advice is generally
conventional and lead free soldering, with peak temperatures of the same. Particular care should be taken in soldering large
260C to 270C acceptable. capacitors to avoid thermal cracks being induced and natural
The heating ramp rate should be such that components see cooling should be use to allow a gradual relaxation of stresses.
a temperature rise of 1.5C to 4C per seconds to maintain Hand soldering and rework of Chip Capacitors
temperature uniformity through the MLCC. The time for which
the solder is molten should be maintained at a minimum, so as to Attachment using a soldering iron requires extra care and is
prevent solder leaching. Extended times above 230C can cause accepted to have a risk of cracking of the chip. Precautions include
problems with oxidation of Sn plating. Use of inert atmosphere preheating of the assembly to within 100C of the solder flow
can help if this problem is encountered. PdAg terminations can temperature and the use of a fine tip iron which does not exceed 30
be particularly susceptible to leaching with lead free, tin rich watts. In no circumstances should the tip of the iron be allowed to
solders and trials are recommended for this combination. Cooling contact the chip directly.
to ambient temperature should be allowed to occur naturally, Knowles recommend hot air/gas as the preferred method for
particularly if larger chip sizes are being soldered. Natural cooling applying heat for rework. Apply even heat surrounding the
allows a gradual relaxation of thermal mismatch stresses in the component to minimise internal thermal gradients.
solder joints. Forced cooling should be avoided as this can induce
Minimise the rework heat duration and allow components to cool
thermal breakage.
naturally after soldering.
Wave soldering Radial Leaded Chip Capacitors Transportation
Radial leaded capacitors are suitable for wave soldering when Where possible, any transportation should be carried out with the
mounted on the opposite side of the board to the wave. The body product in its unopened original packaging. If already opened,
of radial components should not be exposed directly to the wave. any environmental control agents supplied should be returned to
Maximum permissible wave temperature is 260C for Radial Leaded packaging and the packaging re-sealed.
capacitors. Avoid paper and card as a primary means of handling, packing,
Hand soldering Radial Leaded capacitors transportation and storage of loose components. Many grades
have a sulphur content which will adversely affect termination
Radial capacitors can be hand soldered into boards using soldering solderability.
irons, provided care is taken not to touch the body of the capacitor
Loose chips should always be packed with sulphur-free wadding to
with the iron tip. Soldering should be carried out from the opposite
prevent impact or abrasion damage during transportation.
side of the board to the radial to minimise the risk of damage to
the capacitor body. Where possible, a heat sink should be used Storage
between the solder joint and the body, especially if longer dwell
Incorrect storage of components can lead to problems for the
times are required.
user. Rapid tarnishing of the terminations, with an associated
Solder leaching degradation of solderability, will occur if the product comes into
contact with industrial gases such as sulphur dioxide and chlorine.
Leaching is the term for the dissolution of silver into the solder
Storage in free air, particularly moist or polluted air, can result in
causing a failure of the termination system which causes increased
termination oxidation.
ESR, tan and open circuit faults, including ultimately the
possibility of the chip becoming detached. Leaching occurs more Packaging should not be opened until the MLCs are required
readily with higher temperature solders and solders with a high for use. If opened, the pack should be re-sealed as soon as is
tin content. Pb free solders can be very prone to leaching certain practicable. Alternatively, the contents could be kept in a sealed
termination systems. To prevent leaching, exercise care when container with an environmental control agent.
choosing solder alloys and minimize both maximum temperature Long term storage conditions, ideally, should be temperature
and dwell time with the solder molten. controlled between -5 and +40C and humidity controlled between
Plated terminations with nickel or copper anti leaching barrier layers 40 and 60% R.H.
are available in a range of top coat finishes to prevent leaching Taped product should be stored out of direct sunlight, which might
occurring. These finishes also include Syfer FlexiCap for improved promote deterioration in tape or adhesive performance.
stress resistance post soldering. Product, stored under the conditions recommended above, in its as
Bonding received packaging, has a minimum shelf life of 2 years.
Hybrid assembly using conductive epoxy or wire bonding requires

the use of silver palladium or gold terminations. Nickel barrier
termination is not practical in these applications, as intermetallics
will form between the dissimilar metals. The ESR will increase
over time and may eventually break contact when exposed to
temperature cycling.
Cleaning
Chip capacitors can withstand common agents such as water,
alcohol and degreaser solvents used for cleaning boards. Ascertain
that no flux residues are left on the chip surfaces as these diminish
electrical performance.
Handling
Ceramics are dense, hard, brittle and abrasive materials. They are
liable to suffer mechanical damage, in the form of chips or cracks, if
improperly handled.
Terminations may be abraded onto chip surfaces if loose chips are
tumbled in bulk. Metallic tracks may be left on the chip surfaces
which might pose a reliability hazard.
Components should never be handled with fingers; perspiration and
skin oils can inhibit solderability and will aggravate cleaning.
Chip capacitors should never be handled with metallic instruments.
Metal tweezers should never be used as these can chip the product
and may leave abraded metal tracks on the product surface.
Plastic or plastic coated metal types are readily available and
recommended - these should be used with an absolute minimum of
applied pressure.
Counting or visual inspection of chip capacitors is best performed
on a clean glass or hard plastic surface.
If chips are dropped or subjected to rough handling, they should
be visually inspected before use. Electrical inspection may also
reveal gross damage via a change in capacitance, an increase in
dissipation factor or a decrease either in insulation resistance or
electrical strength.
Chip Marking System
If required, we can mark capacitors with the EIA 198 two digit code to
show the capacitance value of the part. On chips larger than 3333, or
NA
A5
for leaded encapsulated devices, ink marking is available. However, for
chip sizes 0805 through to 3333 identification marking is accomplished
5
by using either laser or ink jet printer. This system does not degrade
the ceramic surface, or induce microcracks in the part.
Marking for other sizes may be available upon special request to
determine if applicable; please contact the sales office. Two position alpha numeric marking Three position alpha numeric
Marking is an option on Novacap and Syfer branded products and is available on chip sizes 0805 marking is available on chip sizes
needs to be specified when ordering. through 3333. 1206 and larger.
The marking denotes retma value The making denotes Novacap as
and significant figures of capacitance vendor (N), followed by the standard
(see table) eg: A5 = 100,000pF. two digit alpha numeric identification.
Marking Code - value in picofarads for alpha-numeric code
Number 0 1 2 3 4 5 6 7
A 1.0 10 100 1,000 10,000 100,000 1,000,000 10,000,000
B 1.1 11 110 1,100 11,000 110,000 1,100,000 11,000,000
C 1.2 12 120 1,200 12,000 120,000 1,200,000 12,000,000
D 1.3 13 130 1,300 13,000 130,000 1,300,000 13,000,000
E 1.5 15 150 1,500 15,000 150,000 1,500,000 15,000,000
F 1.6 16 160 1,600 16,000 160,000 1,600,000 16,000,000
G 1.8 18 180 1,800 18,000 180,000 1,800,000 18,000,000
H 2.0 20 200 2,000 20,000 200,000 2,000,000 20,000,000
J 2.2 22 220 2,200 22,000 220,000 2,200,000 22,000,000
K 2.4 24 240 2,400 24,000 240,000 2,400,000 24,000,000
L 2.7 27 270 2,700 27,000 270,000 2,700,000 27,000,000
M 3.0 30 300 3,000 30,000 300,000 3,000,000 30,000,000
N 3.3 33 330 3,300 33,000 330,000 3,000,000 33,000,000
P 3.6 36 360 3,600 36,000 360,000 3,600,000 36,000,000
Q 3.9 39 390 3,900 39,000 390,000 3,900,000 39,000,000
R 4.3 43 430 4,300 43,000 430,000 4,300,000 43,000,000

Letter
S 4.7 47 470 4,700 47,000 470,000 4,700,000 47,000,000
T 5.1 51 510 5,100 51,000 510,000 5,100,000 51,000,000
U 5.6 56 560 5,600 56,000 560,000 5,600,000 56,000,000
V 6.2 62 620 6,200 62,000 620,000 6,200,000 62,000,000
W 6.8 68 680 6,800 68,000 680,000 6,800,000 68,000,000
X 7.5 75 750 7,500 75,000 750,000 7,500,000 75,000,000
Y 8.2 82 820 8,200 82,000 820,000 8,200,000 82,000,000
Z 9.1 91 910 9,100 91,000 920,000 9,200,000 92,000,000
a 2.5 25 250 2,500 25,000 250,000 2,500,000 25,000,000
b 3.5 35 350 3,500 35,000 350,000 3,500,000 35,000,000
d 4.0 40 400 4,000 40,000 400,000 4,000,000 40,000,000
e 4.5 45 450 4,500 45,000 450,000 4,500,000 45,000,000
f 5.0 50 500 5,000 50,000 500,000 5,000,000 50,000,000
m 6.0 60 600 6,000 60,000 600,000 6,000,000 60,000,000
n 7.0 70 700 7,000 70,000 700,000 7,000,000 70,000,000
t 8.0 80 800 8,000 80,000 800,000 8,000,000 80,000,000
y 9.0 90 900 9,000 90,000 900,000 9,000,000 90,000,000
Ceramic Chip Capacitors - Packaging information
Tape and reel packing of surface mounting chip capacitors for automatic placement are in accordance with IEC60286-3.
Dimensions 1.5(.06) min
20.2(0.795) min
Product identifying label mm (inches) T
Plastic carrier tape
13(0.512)
0.5(0.02)
A 60(2.36) min
G
Top tape
Embossment 8 or 12mm 178mm (7) or

nominal 330mm (13) dia. reel Symbol Description 178mm reel 330mm reel
A Diameter 178 (7) 330 (13)
Peel force G Inside width 8.4 (0.33) 12.4 (0.49)
The peel force of the top sealing tape is between 0.2 and 1.0 T Outside width 14.4 (0.56) max 18.4 (0.72) max
Newton at 180. The breaking force of the carrier and sealing tape
in the direction of unreeling is greater than 10 Newtons.
Identification Leader and Trailer

Each reel is labelled with the following information: manufacturer, END START
chip size, capacitance, tolerance, rated voltage, dielectric type,
batch number, date code and quantity of components.
Missing components
Maximum number of missing components shall be 1 per reel
or 0.025% whichever is greater. There shall not be consecutive 40 empty sealed length is 20 sealed
components missing from any reel for any reason. embossments minimum quantity dependent embossments minimum
TRAILER COMPONENTS LEADER 400mm min.

Tape dimensions
Feed direction
T D0 P0
Sealing tape P2
F
W
K0
B0
t1 D1 P1 A0
Embossment Cavity centre lines
Dimensions mm (inches)
Symbol Description 8mm tape 12mm tape
A0 Width of cavity
B0 Length of cavity Dependent on chip size to minimize rotation
K0 Depth of cavity
W Width of tape 8.0 (0.315) 12.0 (0.472)
F Distance between drive hole centres and cavity centres 3.5 (0.138) 5.5 (0.213)
E Distance between drive hole centres and tape edge 1.75 (0.069)
P1 Distance between cavity centres 4.0 (0.156) 8.0 (0.315)
P2 Axial distance between drive hole centres and cavity centres 2.0 (0.079)
P0 Axial distance between drive hole centres 4.0 (0.156)
D0 Drive hole diameter 1.5 (0.059)
D1 Diameter of cavity piercing 1.0 (0.039) 1.5 (0.059)
T Carrier tape thickness 0.3 (0.012) 0.1 (0.004) 0.4 (0.016) 0.1 (0.004)
t1 Top tape thickness 0.1 (0.004) max
Ceramic Chip Capacitors - Packaging information
Component orientation Outer Packaging
Tape and reeling is in accordance with IEC 60286 part 3, which Outer carton dimensions mm (inches) max.
defines the packaging specifications of lead less components on
continuous tapes. Reel Size No. of reels L W T
Notes: 1) IEC60286-3 states Ao < Bo 178 (7.0) 1 185 (7.28) 185 (7.28) 25 (0.98)
(see tape dimensions on page 18).
2) Regarding the orientation of 1825 and 2225 178 (7.0) 4 190 (7.48) 195 (7.76) 75 (2.95)
components, the termination bands are right to left,
330 (13.0) 1 335 (13.19) 335 (13.19) 25 (0.98)
NOT front to back. Please see diagram.
T
Product identifying label
Orientation of 1825 & 2225 components

Note: Labelling of box and L
reel with bar codes (Code 39)
available by arrangement.
Reel quantities - Novacap, Syfer and Voltronics products
Chip
0402 0505 0603 0805 1111 1206 1210 1410 1515 1808 1812 1825 2211 2215 2220 2221 2225 2520 3333 3530 3640 4540 5550 6560 7565
size
Max. chip thickness
mm 0.61 1.3 0.89 1.37 1.8 1.63 2.0 2.0 3.3 2.0 3.2 4.2 2.5 2.5 4.2 2.0 4.2 4.57 6.35 6.35 4.2 7.62 7.62 7.62 7.62
inches 0.02 0.05 0.03 0.05 0.07 0.06 0.08 0.08 0.13 0.08 0.13 0.165 0.1 0.1 0.165 0.08 0.165 0.18 0.25 0.25 0.165 0.3 0.3 0.3 0.3
Reel quantities
178mm
(7) 10k 2500 4000 3000 1000 2500 2000 2000 500 1500 500 500 750 500 500 1000 500 1000 - - - - - -
330mm
(13) 15k 10k 16k 12k 5000 10k 8000 8000 - 6000 2000 2000 4000 4000 2000 - 2000 1000 1000 500 500 500 500 500 200
Packaging configurations - DLI products Bulk packaging, tubs

7" 13" Chips can be supplied in rigid re-sealable plastic tubs together with
7" Reel, Reel, Reel, impact cushioning wadding. Tubs are labelled with the details: chip
Chip size
8mm Tape 16mm 16mm 2" x 2" size, capacitance, tolerance, rated voltage, dielectric type, batch
Tape Tape Waffle number, date code and quantity of components.
Pack
Horizontal Vertical Horizontal
Style LxW Orientation Orientation Orientation
0.040" x
C04 0.020"
4000 - - - -
Product identifying label
0.060" x
C06 0.030"
4000 - - - 108
Caution label
0.110 x
C07 0.070
2000 - - - - H
0.080" x
C08 0.050"
5000 3100 - - 108
0.055" x
C11 0.055"
3500 3100 - - 108
0.110" x Dimensions mm (inches)

C17 0.110"
2350 750 - - 49 D
H 60 (2.36)
0.110" x
C18 0.110"
2350 750 - - 49 D 50 (1.97)
0.220" x
C22 0.245"
500 - - - -
0.380" x
C40 0.380"
250 - 250 1300 -
Chip dimensions
L1
1. For FlexiCap terminations, length increase by maximum 0.004 (0.1mm). T
2. For special ranges, inc. High Q and Ultra-low ESR, dimensions may vary. See individual catalogue page.
3. High Q and Ultra-low ESR ranges dimensions may vary for optimum performance.
4. Non-standard thicknesses are available consult local Knowles Capacitors Sales Office.
W
L2
Size Length (L1) Width (W) Max. Thickness (T) Termination Band (L2)
mm ~ inches mm ~ inches mm ~ inches min (mm ~ inches) max (mm ~ inches)
0402 1.0 0.10 ~ 0.04 0.004 0.50 0.10 ~ 0.02 0.004 0.60 ~ 0.024 0.10 ~ 0.004 0.40 ~ 0.016
C04 1.057 0.188 ~ 0.042 0.008 0.515 0.153 ~ 0.02 0.006 0.64 ~ 0.025 0.097 ~ 0.004 0.427 ~ 0.017
0504 1.27 0.152 ~ 0.050 0.006 1.02 0.152 ~ 0.04 0.006 1.12 ~ 0.044 0.20 ~ 0.008 0.50 ~ 0.02
0505 1.4 +0.35 -0.25 ~ 0.055 +0.014 -0.01 1.4 0.25 ~ 0.055 0.01 1.27 ~ 0.05 0.13 ~ 0.005 0.5 ~ 0.02
RF0505 1.4 0.13 ~ 0.055 0.005 1.4 0.381 ~ 0.055 0.015 1.45 ~ 0.057 0.20 ~ 0.008 0.50 ~ 0.02
C11 1.477 0.391 ~ 0.059 0.016 1.416 0.451 ~ 0.056 0.018 1.334 ~ 0.053 0.193 ~ 0.008 0.733 ~ 0.029
0603 1.6 0.15 ~ 0.063 0.006 0.8 0.15 ~ 0.032 0.006 0.90 ~ 0.036 0.20 ~ 0.004 0.40 ~ 0.016
C06 1.532 0.229 ~ 0.06 0.009 0.77 0.191 ~ 0.031 0.008 0.8 ~ 0.032 0.169 ~ 0.007 0.680 ~ 0.027
C07 1.797 0.470 ~ 0.071 0.019 2.813 0.521 ~ 0.111 0.021 2.667 ~ 0.105 0.193 ~ 0.008 1.20 ~ 0.047
0805 2.0 0.20 ~ 0.079 0.008 1.25 0.20 ~ 0.049 0.008 1.37 ~ 0.054 0.25 ~ 0.010 0.75 ~ 0.030
C08 2.048 0.407 ~ 0.081 0.016 1.28 0.267 ~ 0.051 0.011 1.360 ~ 0.054 0.362 ~ 0.014 1.04 ~ 0.041
0907 2.29 0.203 ~ 0.090 0.008 1.78 0.203 ~ 0.070 0.008 1.52 ~ 0.06 0.25 ~ 0.010 0.75 ~ 0.030
1005 2.54 0.203 ~ 0.100 0.008 1.27 0.203 ~ 0.050 0.008 1.37 ~ 0.054 0.25 ~ 0.010 0.75 ~ 0.030
1111 2.79 +0.51 -0.25 ~ 0.11 +0.02 -0.01 2.79 0.38 ~ 0.113 0.015 1.78 ~ 0.07 0.13 ~ 0.005 0.63 ~ 0.025
RF1111 2.79 0.39 ~ 0.110 0.005 2.79 0.381 ~ 0.110 0.015 2.59 ~ 0.102 0.25 ~ 0.010 0.75 ~ 0.030
C17 2.94 0.527 ~ 0.116 0.021 2.813 0.521 ~ 0.111 0.021 2.667 ~ 0.105 0.193 ~ 0.008 1.2 ~ 0.047
C18 3.14 0.727 ~ 0.124 0.029 2.946 0.654 ~ 0.116 0.026 2.667 ~ 0.105 0.193 ~ 0.008 1.2 ~ 0.047
1206 3.2 0.20 ~ 0.126 0.008 1.6 0.20 ~ 0.063 0.008 1.70 ~ 0.068 0.25 ~ 0.010 0.75 ~ 0.030
1210 3.2 0.20 ~ 0.126 0.008 2.5 0.20 ~ 0.098 0.008 2.0 ~ 0.08 0.25 ~ 0.010 0.75 ~ 0.030
1515 3.81 0.381 ~ 0.150 0.015 3.81 0.381 ~ 0.150 0.015 3.3 ~ 0.13 0.381 ~ 0.015 1.143 ~ 0.045
1808 4.5 0.35 ~ 0.180 0.014 2.0 0.30 ~ 0.08 0.012 2.0 ~ 0.08 0.25 ~ 0.01 1.0 ~ 0.04
1812 4.5 0.30 ~ 0.180 0.012 3.2 0.20 ~ 0.126 0.008 3.2 ~ 0.125 0.25 ~ 0.010 1.143 ~ 0.045
1825 4.5 0.30 ~ 0.180 0.012 6.40 0.40 ~ 0.252 0.016 4.2 ~ 0.16 0.25 ~ 0.010 1.0 ~ 0.04
2020 5.0 0.40 ~ 0.197 0.016 5.0 0.40 ~ 0.197 0.016 4.5 ~ 0.18 0.25 ~ 0.01 1.0 ~ 0.04
2220 5.7 0.40 ~ 0.225 0.016 5.0 0.40 ~ 0.197 0.016 4.2 ~ 0.165 0.25 ~ 0.01 1.0 ~ 0.04
2211 5.7 0.40 ~ 0.225 0.016 2.79 0.30 ~ 0.11 0.012 2.5 ~ 0.1 0.25 ~ 0.01 0.8 ~ 0.03
2215 5.7 0.40 ~ 0.225 0.016 3.81 0.35 ~ 0.35 0.02 2.5 ~ 0.1 0.25 ~ 0.01 0.8 ~ 0.03
2221 5.59 0.381 ~ 0.220 0.015 5.33 0.381 ~ 0.210 0.015 2.03 ~ 0.08 0.381 ~ 0.015 1.143 ~ 0.045
2225 5.7 0.40 ~ 0.225 0.016 6.30 0.40 ~ 0.252 0.016 4.2 ~ 0.165 0.381 ~ 0.01 1.143 ~ 0.045
C22 5.734 0.667 ~ 0.226 0.026 6.37 0.699 ~ 0.251 0.028 3.467 ~ 0.137 N/A N/A
2520 6.35 0.40 ~ 0.250 0.016 5.08 0.40 ~ 0.200 0.016 4.57 ~ 0.18 0.381 ~ 0.015 1.143 ~ 0.045
RF2525 5.84 0.21 ~ 0.230 0.008 6.35 0.381 ~ 0.250 0.015 4.19 ~ 0.165 0.381 ~ 0.015 1.143 ~ 0.045
3333 8.38 0.432 ~ 0.330 0.017 8.38 0.432 ~ 0.330 0.017 6.35 ~ 0.25 0.381 ~ 0.015 1.143 ~ 0.045
3530 8.89 0.457 ~ 0.350 0.018 7.62 0.381 ~ 0.300 0.015 6.35 ~ 0.25 0.381 ~ 0.015 1.143 ~ 0.045
3640 9.2 0.50 ~ 0.36 0.02 10.16 0.50 ~ 0.40 0.02 4.5 ~ 0.18 0.50 ~ 0.02 1.50 ~ 0.06
C40 9.732 0.804 ~ 0.384 0.032 8.665 1.737 ~ 0.381 0.029 3.467 ~ 0.137 N/A N/A
4040 10.2 0.508 ~ 0.400 0.020 10.2 0.508 ~ 0.400 0.020 7.62 ~ 0.30 0.50 ~ 0.02 1.50 ~ 0.06
4540 11.4 0.584 ~ 0.450 0.023 10.2 0.508 ~ 0.400 0.020 7.62 ~ 0.30 0.50 ~ 0.02 1.50 ~ 0.06
5440 13.7 0.686 ~ 0.540 0.027 10.2 0.508 ~ 0.400 0.020 7.62 ~ 0.30 0.50 ~ 0.02 1.50 ~ 0.06
5550 14.0 0.711 ~ 0.550 0.028 12.7 0.635 ~ 0.500 0.025 7.62 ~ 0.30 0.50 ~ 0.02 1.50 ~ 0.06
6560 16.5 0.838 ~ 0.650 0.033 15.2 0.762 ~ 0.600 0.030 7.62 ~ 0.30 0.50 ~ 0.02 1.50 ~ 0.06
7565 19.1 0.965 ~ 0.750 0.038 16.5 0.838 ~ 0.650 0.033 7.62 ~ 0.30 0.50 ~ 0.02 1.50 ~ 0.06
8060 20.3 0.5 ~ 0.80 0.02 15.24 0.50 ~ 0.60 0.02 4.2 ~ 0.165 0.50 ~ 0.02 1.50 ~ 0.06
Chip ordering information - DLI parts
C 17 CF 620 J - 7 U N - X 0 T
MLC Case Capacitance Capacitance Rated Lead Test
Dielectric Termination Marking Packaging
Capacitor Size Codes Tolerance voltage Type Level
Voltage
Case Size Codes Test Level
Case Dimensions Code Value Code Testing
04 0.040" x 0.020" 5 50V X Commercial or Industrial
06 0.060" x 0.030" 1 100V
Y Reduced Visual
8 150V
07 0.110" x 0.070" A MIL-PRF-55681 Group A
6 200V
08 0.080" x 0.050" C MIL-PRF-55681 Group C
9 250V
11 0.055" x 0.055" 3 300V D Customer Specified
17 0.110" x 0.110" 4 500V
18 0.110" x 0.110" 7 1kV
22 0.220" x 0.250" A 1.5kV
G 2kV Laser Mark
40 0.380" x 0.380"
B 2.5kV
Code Laser Marking
D 3.6kV
H 7.2kV 0 No marking
Dielectric Codes S SPECIAL 1* Single-side marked
2* Double-side marked
Material Characteristics
3* Large single-side marked
AH P90 High-Q Capacitance Tolerance 4* Large double-side marked
CF NP0 High-Q
Code Value 5* Vertical edge marked
A 0.05pF 9 Customer Specified
B 0.1pF *Reduces DWV Rating.
Capacitance Codes C 0.25pF
D 0.5pF
1st two digits are 1R0 1.0pF F 1%
significant figures G 2% Packaging
of capacitance, 120 12pF J 5%
3rd digit denotes Code Packaging
K 10%
number of zeros, 471 470pF T Tape & Reel Horizontal
R = decimal point M 20%
Examples: X GMV V Tape & Reel Vertical
102 1,000pF
S SPECIAL W Waffle Pack
<10pF A, B, C, D
B Bulk
>10pF F, G, J, K, M
P Plastic Box
R Tube (Rail)
Termination Codes S Customer Specified
Code Termination System
T Ag Termination, Ni Barrier Layer, Heavy SnPb Plated Solder
U Ag Termination, Ni Barrier Layer, SnPb Plated Solder Leading
S Ag Termination, Ni Barrier Layer, Gold Flash*
Z Ag Termination, Ni Barrier Layer, Sn Plated Solder*
Code Lead Type
E Ag Termination, Enhanced Ni Barrier, Sn Plated Solder* A Axial Ribbon
P** AgPd Termination* B Radial Ribbon
Q Polymer Termination, Ni Barrier Layer, Sn Plated Solder* C Center Ribbon
Y Polymer Termination, Ni Barrier Layer, SnPb Plated Solder Specialty Customer
D
Defined
M** Polymer Termination, Cu Barrier Layer, Sn Plated Solder*
E Axial Wire
W** Ag Termination, Cu Barrier Layer, Sn Plated Solder*
F Radial Wire
H** Ag Termination, Enhanced Cu Barrier, Sn Plated Solder*
N NONE
V** Ag Termination, Cu Barrier Layer, SnPb Plated Solder
Note: Consult your local
R** Ag Termination, Cu Barrier Layer, Heavy SnPb Plated Solder Sales Office for RoHS compliant leaded
** Nonmagnetic *Indicates RoHS terminations devices.
Lead Termination Codes Leads are attached with high melting point solder (HMP) at 296C.
Axial Ribbon - Code A Radial Ribbon - Code B Center Ribbon - Code C Axial Wire Lead - Code E Radial Wire Lead - Code F
Chip ordering information - Novacap parts
XX 1206 N 472 J 101 N X050 H T M HB

High High
Capacitance Capacitance Special
Prefix Case Size Dielectric Voltage Termination Reliability Packaging Marking Reliability
Codes Tolerance Thickness
Testing Test Criteria
Marking
None Unmarked
Prefix Definitions
Special Thickness M Marked
None Standard chip *Marking not
None Standard available on
RF Improved ESR Capacitor p. 39 thickness as per sizes < 0603
ST Stacked Capacitor Assembly p. 76 - 81 Novacap catalog Note: Refer to page 17.

specifications
SM Stacked Hi-Rel Capacitor Assembly p. 76 - 81
CR Cap Rack Arrays p. 82 X Denotes a special
thickness other Packaging
than standard.
Specify in inches None Bulk
if required.
T Tape and
(As shown above
Reel
Dielectric Codes X = 0.050)
W Waffle Pack
N C0G/NP0 Ultra Stable
K R3L Ultra Stable
B X7R Stable
High Reliability High Reliability
W X5R Stable
Testing Testing Criteria
X BX MIL
{
None Standard product HB MIL-PRF-55681 Group A
BB X7R Stable BME
H High Reliability Testing HV MIL-PRF-49467 Group A
BW X5R Stable BME
M C0G/NP0 Non Magnetic H High Temp Screening HS MIL-PRF-123 Group A
C X7R Non Magnetic HK MIL-PRF-38534 Class K
F C0G/NP0 High Temp. (up to 160C)
D, RD C0G/NP0 High Temp. (up to 200C)
Voltage Code Termination Codes
S X8R High Temp. (up to 150C)
E, RE Class II High Temp. (up to 200C) 1st two digits are significant, P Palladium Silver
G Class II High Temp. (up to 160C) third digit denotes number PR Palladium Silver*
of zeros. For example:
RN C0G/NP0 Lead free K Solderable Palladium Silver*
160 16 Volts N Nickel Barrier* 100% tin
RB X7R Lead free
101 100 Volts Y Nickel Barrier 90% tin, 10% lead
501 500 Volts NG Nickel Barrier Gold Flash*
102 1,000 Volts C FlexiCap/Nickel Barrier* 100% tin
502 5,000 Volts D FlexiCap/Nickel Barrier 90% tin, 10% lead

B Copper Barrier* 100% tin
Capacitance Codes 103 10,000 Volts
E Copper Barrier 90% tin, 10% lead
1st two digits 1R0 1.0pF S Silver*
are significant
figures of 120 12pF *Indicates RoHS terminations
capacitance, 471 470pF
3rd digit Capacitance Tolerance Codes
denotes 102 1,000pF
number of Code Tolerance C0G/NP0 R3L X7R BX X8R Class II X5R
zeros, R = 273 0.027F
decimal point * Not RF series N M F/D, RD K B C, RE X S E/G W
474 0.47F
Examples:
B 0.10pF
105 1.0F Cap.
C 0.25pF Value
< 10pF
D 0.50pF
F 1%
G 2%
J 5% * *
K 10%
M 20%
Chip ordering information - Syfer parts
1210 Y 100 0103 K X T ___

Capacitance Capacitance
Chip Size Termination Voltage Dielectric Packaging Suffix code
in picofarads (pF) Tolerance
Case Code
0402 Capacitance Packaging
0603 Tolerance Codes
Code
0805
Code Tolerance T 178mm (7) reel
1206
H 0.05pF < 4.7pF R 330mm (13) reel
1210
1808 H 0.05pF B Bulk pack - tubs or
1812 trays
B 0.10pF Cap. Value
1825 C 0.25pF
< 10pF
2220
D 0.50pF
2225
F 1%
3640
5550
G 2% Suffix Definitions
Cap. Value
8060 J 5% > 10pF
Used for specific customer
K 10% requirements
M 20% PXX Palladium electrodes
Chip marking
LS*
*(consult sales office)
Termination Codes
A Nickel barrier 90/10% tin/lead
Dielectric Codes
F Palladium Silver*
Code Dielectric Features
H FlexiCap/Nickel Barrier 90/10% tin/lead
C C0G/NP0 (1B) Ultra Stable
J Nickel Barrier* 100% tin
H X8G Ultra Stable
Y FlexiCap/Nickel Barrier* 100% tin
P X5R Stable
2 Copper Barrier* (Non Mag) 100% tin
X X7R (2R1) Stable
3 FlexiCap/Copper Barrier* (Non Mag) 100% tin
J X7R (BME) Stable
4 Copper Barrier (Non Mag) 90/10% tin/lead N X8R Stable
5 FlexiCap/Copper Barrier (Non Mag) 90/10% tin/lead Q C0G/NP0 High Q version
*Indicates RoHS terminations U C0G/NP0 Ultra-low ESR version
A C0G/NP0 (1B/NP0) AEC -Q200 approved
S X7R (BME) AEC -Q200 approved
E X7R (2R1) AEC -Q200 approved
T X8R AEC -Q200 approved
Voltage Code X X7R AEC -Q200 approved
Code Value Code Value Code Value F C0G/NP0 (1B/NP0) IECQ-CECC release
010 10Vdc 1K0 1kVdc A25 250Vac D X7R (2R1) IECQ-CECC release
016 16Vdc 1K2 1.2kVdc R BZ (2C1) IECQ-CECC release
025 25Vdc 1K5 1.5kVdc B BX (2X1) IECQ-CECC release
050 50Vdc 2K0 2kVdc G C0G/NP0 (BME) High Temp (up to 200C)
063 63Vdc 2K5 2.5kVdc
100 100Vdc 3K0 3kVdc Capacitance Code
200 200Vdc 4K0 4kVdc
Calculation Example Capacaitance value
500 500Vdc 6K0 6kVdc <1.0pF
Insert a P for the decimal point P300 0.3pF (values in 0.1pF steps)
as the 1st character.
10K 10kVdc
12K 12kVdc 1.0pF & <10pF
Insert a P for the decimal point 8P20 8.2pF (values are E24 series)
as the 2nd character.
10pF
1st digit is 0.
2nd and 3rd digits are significant 0101 100pF (values are E24 series)
figures of capacitance value.
4th digit is number of zeros.
MLCC standard range - 10V to 12kVdc
200/
10V 16V 25V 50/63V 100V 500V 630V 1kV
250V
C0G/ C0G/ C0G/ C0G/ C0G/ C0G/ C0G/ C0G/ C0G/
X5R X7R X5R X7R X5R X7R X5R X7R X7R X7R X7R X7R
NP0 NP0 NP0 NP0 NP0 NP0 NP0 NP0 NP0
0.3p 120p 0.3p 120p 0.3p 120p 0.3p 120p 0.3p 120p
0402 - - - - - - - - - -
270p 5.6n 220p 4.7n 180p 47n 180p 4.7n 100p 2.2n
0.47p 120n 0.47p 100p 0.47p 100p 0.47p 100p 56n 0.47p 100p 0.47p 100p 0.47p 100p
0603 - - - - 120n - - - - - - - - - - -
3.9n 150n 2.7n 100n 2.2n 100n 1.5n 47n 68n 470p 33n 220p 10n 150p* 1.5n*
1.0p 390n 1.0p 100p 390n 1.0p 100p 270n 1.0p 100p 270n 1.0p 100p 1.0p 100p 1.0p 100p 1.0p 100p 1.0p 100p
0805 - - - - - - - - - - - - - - - - - - - - -
15n 680n 12n 330n 470n 10n 220n 390n 5.6n 220n 330n 2.2n 100n 1n 56n 680p 15n 560p 12n 180p 10n
1.0p 1.2 1.0p 100p 1.0p 100p 1.0p 100p 560n 1.0p 100p 1.0p 100p 1.0p 100p 1.0p 100p 1.0p 100p
1206 - - - - 1.2 - - 1.0 - - - - - - - - - - - - -
47n 1.5 33n 1.0 27n 820n 22n 470n 680n 8.2n 330n 3.3n 150n 2.2n 68n 1.5n 47n 1.0n 27n
3.9p 1.8 3.9p 100p 1.8 3.9p 100p 1.5 3.9p 100p 1.2 3.9p 100p 3.9p 100p 3.9p 100p 3.9p 100p 3.9p 100p
1210 - - - - - - - - - - - - - - - - - - - - -
100n 3.3 68n 1.5 2.7 56n 1.2 2.2 33n 1.0 1.5 18n 680n 8.2n 330n 6.8n 150n 3.9n 100n 2.2n 47n
4.7p 1.8 4.7p 100p 1.8 4.7p 100p 4.7p 100p 820n 4.7p 100p 4.7p 100p 4.7p 100p 4.7p 100p 4.7p 100p
1808 - - - - - - - 1.5 - - - - - - - - - - - - -
100n 2.7 68n 1.5 2.2 47n 1.2 33n 680n 1.0 18n 560n 8.2n 270n 5.6n 150n 3.9n 100n 2.2n 47n
10p 3.9 10p 150p 3.9 10p 150p 2.7 10p 150p 2.7 10p 150p 10p 150p 10p 150p 10p 150p 10p 150p
1812 - - - - - - - - - - - - - - - - - - - - -
T=2.5mm 220n 10 180n 3.3 6.8 150n 2.2 4.7 100n 2.2 3.3 47n 1.5 22n 680n 15n 330n 10n 180n 6.8n 100n
18n
1812 27n - - - 12n - 8.2n -
T=3.2mm 1000n 22n 470n 330n 180n
1825 - - - - - - - - - - - - - - - - - - - - -
T=2.5mm 470n 15 330n 4.7 12 220n 3.9 10 150n 1.8 6.8 68n 1.5 33n 1.0 27n 560n 22n 180n 12n 120n
39n
1825 - 33n 27n 15n
T=3.2mm 47n
2220 - - - - - - - - - - - - - - - - - - - - -
T=2.5mm 470n 18 330n 5.6 12 220n 4.7 10 150n 3.3 6.8 68n 2.2 33n 1.0 22n 560n 18n 330n 15n 120n
39n 27n 22n 18n

2220 - - - - - - - -
T=4.2mm 56n 2200n 39n 1000n 33n 1000n 22n 470n
2225 - - - - - - - - - - - - - - - - - - - - -
T=2.5mm 560n 22 470n 6.8 15 330n 5.6 12 220n 3.3 10 82n 2.7 47n 1.5 33n 820n 22n 390n 18n 150n
56n 39n 27n 22n

2225 - - - -
T=4.0mm 68n 47n 39n 27n
10p 470p 10p 470p 10p 470p 10p 470p 10p 470p 10p 470p
3640 - - - - - - - - - - - -
T=2.5mm 330n 10 270n 5.6 120n 3.3 82n 1.0 68n 680n 47n 180n
150n 100n 82n 56n

3640 - - - -
T=4.0mm 180n 120n 100n 82n
390p 1.0n 390p 1.0n 390p 1.0n 390p 1.0n 390p 1.0n 390p 1.0n
5550 - - - - - - - - - - - -
T=2.5mm 680n 15 470n 10 270n 5.6 180n 1.8 120n 1.2 82n 390n
Note: 0505, 1111 and 2211
case sizes are available in our 220n 150n 100n
5550 specialty
ranges.
330n - - -
T=4.0mm 270n 180n 150n
Please refer to the relevant
sections of this catalogue for 680p 2.2n 680p 2.2n 680p 2.2n 680p 2.2n 680p 2.2n 680p 2.2n
8060 - - - - - - - - - - - -
T=2.5mm more details. 1.0 22 680n 15 390n 10 270n 3.3 220n 2.2 150n 1.0
470n 330n 270n 180n

8060 - - - -
T=4.0mm 560n 470n 390n 270n
200/
10V 16V 25V 50/63V 100V 500V 630V 1kV
250V
Notes: 1) Capacitance in F - min value above max value. 2) *These parts may require conformal coating post soldering. 3) T = Maximum thickness.
4) Higher capacitance values available from the NC range - see page 63. 5) StackiCap high capacitance versions are now available. Please refer to datasheet.
6) Parts in this range may be defined as dual-use under export control legislation as such may be subject to export licence restrictions. Please refer to p12 for
more information on the dual-use regulations and contact the Sales Office for further information on specific part numbers.
1.2kV 1.5kV 2kV 2.5kV 3kV 4kV 5kV 6kV 8kV 10kV 12kV
C0G/ C0G/ C0G/ C0G/ C0G/ C0G/ C0G/ C0G/ C0G/ C0G/ C0G/
X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R
NP0 NP0 NP0 NP0 NP0 NP0 NP0 NP0 NP0 NP0 NP0
0402
0603
1.0p 1.0p 1.0p

- - - 0805
120p 82p 39p
1.0p 100p 1.0p 100p 1.0p 100p 1.0p 1.0p

- - - - - - - - 1206
680p 15n 330p 10n 220p 2.2n 100p 68p
3.9p 100p 3.9p 100p 3.9p 100p 3.9p 3.9p

- - - - - - - - 1210
1.5n 18n 820p 12n 390p 4.7n 220p 150p
4.7p 100p 4.7p 100p 4.7p 100p 4.7p 100p 4.7p 100p 4.7p 100p 4.7p 100p 4.7p 100p
- - - - - - - - - - - - - - - - 1808
1.5n 22n 1.0n 15n 470p 4.7n 270p 1.5n 180p 1.2n 120p* 1.0n* 68p* 680p* 47p* 390p*
10p 150p 10p 150p 10p 150p 10p 150p 10p 150p 10p 150p 10p 150p 10p 150p
- - - - - - - - - - - - - - - - 1812
4.7n 33n 2.7n 22n 1.5n 10n 820p 3.3n 560p 2.7n 270p* 2.2n* 180p* 1.2n* 120p* 1.0n* T=2.5mm
5.6n 330p 220p 150p

- 3.3n - 1.8n 1.0n 680p - - - 1812
6.8n 56n 390p* 270p* 180p* T=3.2mm
- - - - - - - - - - - - - - - - 1825
6.8n 68n 4.7n 47n 3.3n 10n 1.5n 6.8n 1.2n 3.9n 560p* 2.2n* 390p* 1.8n* 270p* 1.5n* T=2.5mm
8.2n 5.6n 1.8n

- - 3.9n - 1.5n 680p* 470p* 330p* 1825
10n 6.8n 2.2n T=3.2mm
- - - - - - - - - - - - - - - - 2220
10n 82n 5.6n 47n 3.3n 27n 1.8n 8.2n 1.5n 6.8n 680p* 4.7n* 470p* 3.9n* 330p* 2.2n*
T=2.5mm
12n 6.8n 3.9n 2.2n 1.8n 820p 560p 390p

- - - - - - - - - - - 2220
15n 220n 10n 150n 5.6n 100n 3.3n 2.2n 1.2n* 820p* 560p* T=4.2mm
- - - - - - - - - - - - - - - - 2225
12n 100n 6.8n 68n 4.7n 33n 2.2n 12n 1.8n 8.2n 820p* 5.6n* 560p* 4.7n* 390p* 2.7n* T=2.5mm
15n 8.2n 5.6n 2.7n 2.2n 1.0n 680p 470p

- - - - - - - - 2225
22n 12n 6.8n 3.9n 2.7n 1.5n* 1.0n* 680p* T=4.0mm
10p 470p 10p 470p 10p 470p 10p 470p 10p 470p 10p 470p 10p 470p 10p 470p 10p 470p 10p 470p 10p 470p
- - - - - - - - - - - - - - - - - - - - - - 3640
33n 150n 22n 100n 10n 47n 6.8n 33n 4.7n 22n 1.8n 6.8n 1.5n 5.6n 1.0n 4.7n 150p 1.5n* 100p 1.0n* 68p 820p* T=2.5mm
39n 27n 12n 8.2n 5.6n 2.2n 1.8n 1.2n

- - - - - - - - 3640
56n 39n 18n 12n 8.2n 3.3n 2.2n 1.5n T=4.0mm
390p 1.0n 390p 1.0n 390p 1.0n 390p 1.0n 390p 1.0n 390p 1.0n 390p 1.0n 390p 1.0n 27p 1.0n 27p 1.0n 27p 1.0n
- - - - - - - - - - - - - - - - - - - - - - 5550
68n 220n 39n 150n 22n 82n 12n 68n 10n 47n 4.7n 15n 2.7n 10n 1.8n 8.2n 330p 4.7n* 180p 2.2n* 120p 1.2n* T=2.5mm
82n 47n 27n 15n 12n 5.6n 3.3n 2.2n

- - - - - - - - 5550
100n 68n 39n 22n 18n 6.8n 4.7n 3.3n T=4.0mm
680p 2.2n 680p 2.2n 680p 2.2n 680p 2.2n 680p 2.2n 680p 2.2n 680p 2.2n 680p 1.8n 47p 1.8n 47p 1.8n 47p 1.8n
- - - - - - - - - - - - - - - - - - - - - - 8060
100n 470n 68n 330n 39n 150n 22n 100n 15n 82n 8.2n 33n 5.6n 22n 3.9n 15n 680p 6.8n* 470p 4.7n* 220p 2.2n* T=2.5mm
120n 82n 47n 27n 18n 10n 6.8n 4.7n

- - - - - - - - 8060
180n 120n 68n 39n 27n 15n 10n 6.8n T=4.0mm
1.2kV 1.5kV 2kV 2.5kV 3kV 4kV 5kV 6kV 8kV 10kV 12kV
Industry Standard - MLC chip range - X7R
Cap
Cap
acit
acit
0402 0603 0805 1206
Cod
Cod
anc
anc
e
e
100pF 101 100pF 101
16V
25V
50/63V
100V
200/250V
500V
16V
25V
50/63V
100V
200/250V
500V
630V
1kV
16V
25V
50/63V
100V
200/250V
500V
630V
1kV
1.2kV
1.5kV
2kV
120 121 120 121
16V
25V
50/63V
100V
200/250V
150 151 150 151
180 181 180 181
220 221 220 221
270 271 270 271
330 331 330 331
390 391 390 391
470 471 470 471
560 561 560 561
680 681 680 681
X7R
820 821 820 821

1.0nF 102 1.0nF 102
1.2 122 1.2 122
1.5nF
2.2nF (200V)
1.5 152 1.5 152
2.2nF
1.8 182 1.8 182
2.2 222 2.2 222
2.7 272 2.7 272
4.7nF (50V)
3.3 332 3.3 332

3.9 392 3.9 392
4.7nF
4.7nF
4.7 472 4.7 472

5.6nF
5.6 562 5.6 562

6.8 682 6.8 682
12nF
8.2 822 8.2 822
10nF
10nF
10nF
10nF 103 10nF 103
15nF
12 123 12 123
15nF
15 153 15 153
18 183 18 183
27nF **
22 223 22 223
27 273 27 273
33nF
33 333 33 333
47nF
39 393 39 393
47nF
47 473 47 473
56nF
68nF
56 563 56 563
68 683 68 683
82 823 82 823
100nF
100nF
100nF
100nF 104 100nF 104
150nF
120 124 120 124
150 154 150 154
180 184 180 184
220nF
220nF
220 224 220 224

270 274 270 274
330nF
330nF
330 334 330 334
390 394 390 394
470nF
470 474 470 474

560 564 560 564
680 684 680 684
820nF
820 824 820 824
X7R
1.0F
1.0F 105 1.0F 105

1.2 125 1.2 125
1.5 155 1.5 155
1.8 185 1.8 185
2.2 225 2.2 225
2.7 275 2.7 275
3.3 335 3.3 335
3.9 395 3.9 395
4.7 475 4.7 475
5.6 565 5.6 565
6.8 685 6.8 685
8.2 825 8.2 825
10F 106 10F 106
12 126 12 126
15 156 15 156
18 186 18 186
22F 226 22F 226
* StackiCap high capacitance versions available from the

For 0504, 0907, 1005, 2020, StackiCap range - see page 62 for details.
2221, 4040, 5440 and 43100 Higher capacitance values available from theNC capacitor range
range information please - see page 63 for details.
refer to your local Knowles ** Max. capacitance of 27nF, has increased chip length of 3.5mm.
Sales Office. Reduced max. cap value of 22nF, for standard dimension.
l = AEC-Q200 approved parts - maximum values.
26 Can be ordered as Novacap or Syfer parts. www.knowlescapacitors.com

10Vdc to 12kVdc
Cap
Cap
acit
acit
1210 1808
Cod
Cod
anc
anc
e
e
100pF 101 100pF 101
16V
25V
50/63V
100V
200/250V
500V
630V
1kV
1.2kV
1.5kV
2kV
16V
25V
50/63V
100V
200/250V
500V
630V
1kV
1.2kV
1.5kV
2kV
2.5kV
3kV
4kV
5kV
6kV
120 121 120 121
150 151 150 151
180 181 180 181
220 221 220 221
270 271 270 271
330 331 330 331
390pF
390 391 390 391
470 471 470 471
560 561 560 561
680pF
680 681 680 681
X7R
1.0nF
820 821 820 821
1.2nF
1.0nF 102 1.0nF 102
1.5nF
1.2 122 1.2 122
1.5 152 1.5 152
1.8 182 1.8 182
2.2 222 2.2 222
2.7 272 2.7 272
3.3 332 3.3 332
4.7nF
4.7nF
3.9 392 3.9 392
4.7 472 4.7 472
5.6 562 5.6 562
6.8 682 6.8 682
8.2 822 8.2 822
10nF 103 10nF 103
12nF
12 123 12 123
15nF
15 153 15 153
18nF
18 183 18 183
22nF
22 223 22 223
27 273 27 273
33 333 33 333
39 393 39 393
47nF
47nF
47 473 47 473
56 563 56 563
68 683 68 683
82 823 82 823
100nF
100nF
100nF 104 100nF 104

120 124 120 124
150nF
150nF
150 154 150 154

180 184 180 184
220 224 220 224
270nF
270 274 270 274

330nF
330 334 330 334

390 394 390 394
470 474 470 474
560nF
560 564 560 564

680nF
680nF
680 684 680 684

820 824 820 824
1.0F
1.0F 105 1.0F 105

1.2F
1.2F
1.2 125 1.2 125

1.5F
1.5F
1.5 155 1.5 155

1.8 185 1.8 185
2.2 225 2.2 225
2.7 275 2.7 275
3.3 335 3.3 335
X7R
3.9 395 3.9 395
4.7 475 4.7 475
5.6 565 5.6 565
6.8 685 6.8 685
8.2 825 8.2 825
10F 106 10F 106
12 126 12 126
15 156 15 156
18 186 18 186
22F 226 22F 226
www.knowlescapacitors.com Can be ordered as Novacap or Syfer parts. 27

Industry Standard - MLC chip range - X7R
Cap
Cap
acit
acit
1812 1825
Cod
Cod
anc
anc
e
e
100pF 101 100pF 101
120 121 120 121
150 151 150 151
16V
25V
50/63V
100V
200/250V
500V
630V
1kV
1.2kV
1.5kV
2kV
2.5kV
3kV
4kV
5kV
6kV
180 181 180 181
220 221 220 221
16V
25V
50/63V
100V
200/250V
500V
630V
1kV
1.2kV
1.5kV
2kV
2.5kV
3kV
4kV
5kV
6kV
270 271 270 271
330 331 330 331
390 391 390 391
470 471 470 471
560 561 560 561
680 681 680 681
X7R
820 821 820 821
1.0nF
1.0nF 102 1.0nF 102
1.2nF
1.2 122 1.2 122
1.5nF
1.5 152 1.5 152
1.8nF
1.8 182 1.8 182
2.2nF
2.2 222 2.2 222
2.7nF
2.7nF
2.7 272 2.7 272
3.3nF
3.3 332 3.3 332

3.9 392 3.9 392
4.7nF
4.7 472 4.7 472
5.6 562 5.6 562
6.8nF
6.8 682 6.8 682
10nF
8.2 822 8.2 822

10nF 103 10nF 103
12 123 12 123
15 153 15 153
18 183 18 183
22 223 22 223
27nF
33nF
27 273 27 273
33 333 33 333
56nF
39 393 39 393
47 473 47 473
68nF
56 563 * 56 563
68 683 68 683
82 823 82 823
100nF
150nF
100nF 104 * 100nF 104
180nF
120 124 180nF 120 124

150 154 150 154
180 184 * 180 184
330nF
220 224 220 224

270 274 270 274
330 334 * 330 334
680nF
390 394 390 394

560nF
470 474 * 470 474

1.5F (200V)
560 564 560 564

680 684 680 684
820 824 820 824
1.0F 105 * 1.0F 105
1.2 125 1.2 125
1.5F
2.2F
1.5 155 1.5 155

1.8F
1.8 185 1.8 185

2.2 F
2.2F
2.2 225 2.2 225

2.7 275 2.7 275
3.3F
X7R
3.3 335 3.3 335
3.9F
3.9 395 3.9 395

4.7F
4.7 475 4.7 475

5.6 565 5.6 565
6.8 685 6.8 685
8.2 825 8.2 825
10F 106 10F 106
12 126 12 126
15 156 15 156
18 186 18 186
22F 226 22F 226

For 0504, 0907, 1005, 2020, StackiCap range - see page 62 for details.
2221, 4040, 5440 and 43100 Higher capacitance values available from theNC capacitor range
- see page 63 for details.
range information please
refer to your local Knowles l = AEC-Q200 approved parts - maximum values.
Sales Office.

10Vdc to 12kVdc
Cap
Cap
acit
acit
2220 2225
Cod
Cod
anc
anc
e
e
100pF 101 100pF 101
120 121 120 121
150 151 150 151
180 181 180 181
220 221 220 221
16V
25V
50/63V
100V
200/250V
500V
630V
1kV
1.2kV
1.5kV
2kV
2.5kV
3kV
4kV
5kV
6kV
270 271 270 271
330 331 330 331
16V
25V
50/63V
100V
200/250V
500V
630V
1kV
1.2kV
1.5kV
2kV
2.5kV
3kV
4kV
5kV
6kV
390 391 390 391
470 471 470 471
560 561 560 561
680 681 680 681
X7R
820 821 820 821
1.0nF 102 1.0nF 102
1.2 122 1.2 122
1.5 152 1.5 152
1.8 182 1.8 182
2.2nF
2.2 222 2.2 222
2.7nF
2.7 272 2.7 272
3.9nF
3.3 332 3.3 332

4.7nF
3.9 392 3.9 392
4.7nF
4.7 472 4.7 472
5.6nF
6.8nF
5.6 562 5.6 562

8.2nF
6.8 682 6.8 682
8.2nF
8.2 822 8.2 822
10nF 103 10nF 103
12nF
12 123 12 123
15 153 15 153
18 183 18 183
33nF
22 223 22 223
33nF
27 273 27 273
33 333 33 333
47nF
39 393 39 393
47 473 47 473
68nF
56 563 56 563
82nF
68 683 68 683
100nF
82 823 82 823
120nF
100nF 104 * 100nF 104

120 124 120 124
150 154 * 150 154
180 184 180 184
220nF
220 224 * 220 224

330nF
270 274 270 274

390nF
330 334 330 334

390 394 390 394
560nF
470 474 * 470 474

820nF
1.8F (200V)
560 564 560 564

680 684 680 684
1.0F
820 824 820 824

1.0F 105 * 1.0F 105
1.2 125 * 1.2 125
1.5 155 1.5 155
1.8 185 1.8 185
2.2F
2.2 225 * 2.2 225

2.7F
3.3F
3.3F
2.7 275 2.7 275

3.3 335 3.3 335
3.9 395 3.9 395
4.7F
X7R
4.7 475 4.7 475
5.6F
5.6F
5.6 565 5.6 565

6.8F
6.8 685 6.8 685

8.2 825 8.2 825
10F 106 10F 106
12 126 12 126
15 156 15 156
18 186 18 186
22F 226 22F 226

Industry Standard - MLC chip range - C0G/NP0
Cap
Cap
acit
acit
0402 0603 0805 1206
Cod
Cod
anc
anc
e
e
0.33pF p33 0.33pF p33
16V
25V
50/63V
100V
200/250V
10V
16V
25V
50/63V
100V
200/250V
500V
0.47 p47 0.47 p47
0.50 p50 0.50 p50
630V
1kV
1.2kV
1.5kV
2kV
10V
16V
25V
50/63V
100V
200/250V
500V
1.0 1p0 1.0 1p0
10V
16V
25V
50/63V
100V
200/250V
500V
630V
1kV
1.2kV
1.5kV
2kV
2.5kV
3kV
1.2 1p2 1.2 1p2
C0G/NP0
1.5 1p5 1.5 1p5

1.8 1p8 1.8 1p8
2.2 2p2 2.2 2p2
2.7 2p7 2.7 2p7
3.3 3p3 3.3 3p3
3.9 3p9 3.9 3p9
4.7 4p7 4.7 4p7
5.6 5p6 5.6 5p6
6.8 6p8 6.8 6p8
8.2 8p2 8.2 8p2
10pF 100 10pF 100
12 120 12 120
15 150 15 150
18 180 18 180
22 220 22 220
27 270 27 270
33 330 33 330
39pF
39 390 39 390
47 470 47 470
56 560 56 560
100pF (200V)
68pF
68 680 68 680
82pF
82 820 82 820
100pF
100pF 101 100pF 101
120pF
180pF (50V)
180pF (50V)
120 121 120 121

150pF
150 151 150 151

180 181 180 181
220pF
220 221 220 221

270pF
560pF (200V)
270 271 270 271

330 331 330 331
390pF
390 391 390 391
470pF
470 471 470 471
560pF
560pF
560 561 560 561
680pF
680 681 680 681
820pF
820 821 820 821

1.0nF
1.0nF
1.0nF 102 1.0nF 102
1.8nF (200V)
1.2 122 1.2 122
1.5nF
1.5nF
1.5 152 1.5 152

1.8 182 1.8 182
2.2pF
2.2 222 2.2 222

2.7pF
3.9nF (50V)
2.7 272 2.7 272

3.3 332 3.3 332
3.9nF
3.9nF
5.6nF (200V)
3.9 392 3.9 392

4.7 472 4.7 472
5.6nF
5.6 562 5.6 562

6.8 682 6.8 682
8.2 822 8.2 822
10nF
10nF
10nF 103 10nF 103

12nF
12 123 12 123
15nF
COG/N
15 153 15 153
18 183 18 183
22nF
22 223 22 223
27nF
27 273 27 273
33nF
33 333 33 333
39 393 39 393
47nF
47 473 47 473
56 563 56 563
68 683 68 683
82 823 82 823
100nF 104 100nF 104
120 124 120 124
150 154 150 154
180 184 180 184
220 224 220 224
270 274 270 274
330 334 330 334
390 394
For 0504, 0907, 1005, 2020, 390 394
470 474 470 474
2221, 4040, 5440 and 43100
560 564 560 564
680 684 range information please 680 684
820 824 refer to your local Knowles 820 824
1.0F 105 Sales Office. 1.0F 105

10Vdc to 12kVdc
Cap
Cap
acit
acit
1210 1808
Cod
Cod
anc
anc
e
e
0.33pF p33 0.33pF p33
0.47 p47 0.47 p47
0.50 p50 0.50 p50
1.0 1p0 1.0 1p0
1.2 1p2 1.2 1p2
C0G/NP0
1.5 1p5 1.5 1p5
1.8 1p8 1.8 1p8
2.2 2p2 2.2 2p2
2.7 2p7 2.7 2p7
3.3 3p3 3.3 3p3
3.9 3p9 3.9 3p9
10V
16V
25V
50/63V
100V
200/250V
500V
630V
1kV
1.2kV
1.5kV
2kV
2.5kV
3kV
4.7 4p7 4.7 4p7
10V
16V
25V
50/63V
100V
200/250V
500V
630V
1kV
1.2kV
1.5kV
2kV
2.5kV
3kV
4kV *
5kV *
6kV *
5.6 5p6 5.6 5p6
6.8 6p8 6.8 6p8
8.2 8p2 8.2 8p2
10pF 100 10pF 100
12 120 12 120
15 150 15 150
18 180 18 180
22 220 22 220
27 270 27 270
33 330 33 330
39 390 39 390
47pF
47 470 47 470
56 560 56 560
68pF
68 680 68 680
82 820 82 820
100pF 101 100pF 101
120 121 120 121
150pF
150 151 150 151

180 181 180 181
220 221 220 221
270pF
270pF
220pF
270 271 270 271

330 331 330 331
390 391 390 391
470pF
470 471 470 471
560 561 560 561
680 681 680 681
820pF
820 821 820 821

1.0nF 102 1.0nF 102
1.2nF
1.2nF
1.2 122 1.2 122

1.5nF
1.5nF
1.5 152 1.5 152

1.8nF
1.8 182 1.8 182

2.2nF
2.2 222 2.2 222

2.7 272 2.7 272
3.3nF
3.3 332 3.3 332

3.9nF
3.9nF
3.9 392 3.9 392

4.7 472 4.7 472
5.6nF
5.6 562 5.6 562

6.8nF
10nF (200V)
6.8 682 6.8 682

8.2 822 8.2 822
10nF
10nF 103 10nF 103

12 123 12 123
NP0
15 153 15 153
18nF
18 183 18 183
22nF
22 223 22 223
27 273 27 273
33nF
33nF
33 333 33 333
39 393 39 393
47nF
47 473 47 473
56nF
56 563 56 563
68nF
68nF
68 683 68 683
82 823 82 823
100nF
100nF
100nF 104 100nF 104

120 124 120 124
150 154 150 154
180 184 180 184
220 224 220 224
270 274 270 274
330 334 330 334
390 394 390 394
470 474 470 474
560 564 560 564
680 684 680 684
820 824 820 824
1.0F 105 1.0F 105
Notes: 1) * These parts may require conformal coating post soldering.

2) Standard chip thickness = 2.5mm maximum unless specified
as 3.2 or 4.0mm.

Industry Standard - MLC chip range - C0G/NP0
Cap
Cap
COG
acit
acit
1812 1825
Cod
Cod
anc
anc
e
e
0.33pF p33 0.33pF p33
0.47 p47 0.47 p47
0.50 p50 0.50 p50
1.0 1p0 1.0 1p0
1.2 1p2 1.2 1p2
C0G/NP0
1.5 1p5 1.5 1p5

1.8 1p8 1.8 1p8
2.2 2p2 2.2 2p2
2.7 2p7 2.7 2p7
3.3 3p3 3.3 3p3
3.9 3p9 3.9 3p9
4.7 4p7 4.7 4p7
5.6 5p6 5.6 5p6
6.8 6p8 6.8 6p8
8.2 8p2 8.2 8p2
10pF 100 10pF 100
10V
16V
25V
50/63V
100V
200/250V
500V
630V
1kV
1.2kV
1.5kV
2kV
2.5kV
3kV
4kV *
5kV *
6kV *
10V
16V
25V
50/63V
100V
200/250V
500V
630V
1kV
1.2kV
1.5kV
2kV
2.5kV
3kV
4kV *
5kV *
6kV *
12 120 12 120
15 150 15 150
18 180 18 180
22 220 22 220
27 270 27 270
33 330 33 330
39 390 39 390
47 470 47 470
56 560 56 560
68 680 68 680
82 820 82 820
100pF 101 100pF 101
120pF
120 121 120 121

150 151 150 151
180pF
180 181 180 181

220 221 220 221
270pF
270 271 270 271
330 331 330 331
390 391 390 391
470 471 470 471
560 561 560 561
680 681 680 681
820pF
820pF
820pF
820 821 820 821

1.0nF 102 1.0nF 102
1.2nF
1.2nF
1.2 122 1.2 122

1.5 152 1.5nF 1.5 152
1.8 182 2.2nF 1.8 182
2.2 222 2.2 222
2.7nF
2.7 272 2.7 272

3.3 332 3.3 332
3.9 392 3.9 392
4.7nF
4.7nF
4.7 472 4.7 472

5.6nF
5.6 562 5.6 562

6.8nF
6.8 682 6.8 682

8.2pF
8.2 822 8.2 822

10nF
10nF
10nF 103 10nF 103

12 123 12 123
15nF
15nF
15 153 15 153
27nF (200V)
18 183 18 183
22nF
22 223 22 223
27nF
27 273 27 273
33 333 33 333
39 393 39 393
47nF
68nF (200V)
47 473 47 473
56 563 56 563
68 683 68 683
82nF
82 823 82 823
100nF
100nF 104 100nF 104

150nF
120 124 120 124

150nF
150 154 150 154

180nF
180 184 180 184

220nF
220nF
220 224 220 224

270 274 270 274
330nF
330 334 330 334

390 394 390 394
470nF
470 474 470 474

560 564 560 564
680 684 680 684
820 824 820 824
1.0F 105 1.0F 105

10Vdc to 12kVdc
Cap
Cap
G/NP0
2220 2225
acit
acit
Cod
Cod
anc
anc
e
e
0.33pF p33 0.33pF p33
0.47 p47 0.47 p47
0.50 p50 0.50 p50
1.0 1p0 1.0 1p0
1.2 1p2 1.2 1p2
C0G/NP0
1.5 1p5 1.5 1p5
1.8 1p8
For 0504, 0907, 1005, 2020, 1.8 1p8
2.2 2p2 2221, 4040, 5440 and 43100 2.2 2p2
2.7 2p7 range information please 2.7 2p7
3.3 3p3 refer to your local Knowles 3.3 3p3
3.9 3p9
Sales Office. 3.9 3p9
4.7 4p7 4.7 4p7
5.6 5p6 5.6 5p6
6.8 6p8 6.8 6p8
8.2 8p2 8.2 8p2
10pF 100 10pF 100
10V
16V
25V
50/63V
100V
200/250V
500V
630V
1kV
1.2kV
1.5kV
2kV
2.5kV
3kV
4kV *
5kV *
6kV *
10V
16V
25V
50/63V
100V
200/250V
500V
630V
1kV
1.2kV
1.5kV
2kV
2.5kV
3kV
4kV *
5kV *
6kV *
12 120 12 120
15 150 15 150
18 180 18 180
22 220 22 220
27 270 27 270
33 330 33 330
39 390 39 390
47 470 47 470
56 560 56 560
68 680 68 680
82 820 82 820
100pF 101 100pF 101
120 121 120 121
150 151 150 151
180 181 180 181
220 221 220 221
270 271 270 271
330pF
330 331 330 331
390pF
390 391 390 391
470pF
470 471 470 471

560 561 560 561
680pF
680 681 680 681

820 821 820 821
1.0nF 102 1.0nF 102
1.2nF
1.2 122 1.2 122
1.5nF
1.5 152 1.5 152

1.8nF
1.8nF
1.8 182 1.8 182

2.2nF
2.2 222 2.2 222

2.7 272 2.7 272
3.3nF
3.3nF
3.3 332 3.3 332

3.9 392 3.9 392
4.7 472 4.7 472
5.6nF
5.6 562 5.6 562

6.8 682 6.8 682
8.2nF
8.2 822 8.2 822

10nF
10nF 103 10nF 103

12nF
12 123 12 123
15nF
15nF
15 153 15 153
18nF
18 183 18 183
22nF
22nF
22nF
22 223 22 223
27 273 27 273
33nF
33nF
33 333 33 333
39 393 39 393
47 473 47 473
82nF (200V)
56 563 56 563
68nF
68 683 68 683
82 823 82 823
100nF
100nF 104 100nF 104

120 124 120 124
150nF
150 154 150 154

220nF
180 184 180 184

220nF
220 224 220 224

270 274 270 274
330nF
330nF
330 334 330 334

390 394 390 394
470nF
470nF
470 474 470 474

560nF
560 564 560 564

680 684 680 684
820 824 820 824
1.0F 105 1.0F 105
Notes: 1) * These parts may require conformal coating post soldering.

2) Standard chip thickness = 2.5mm maximum unless specified
as 3.2 or 4.0mm.

Other Popular Sizes - MLC chip range - X7R
Cap
1515 2520 3333 3530 3640

acit
Cod
anc
e
e
100pF 101
120 121
150 151
200/250V
500V
1kV
1.5kV
2kV
3kV
4kV
180 181
220 221
270 271
330 331
390 391
470 471
200/250V
500V
630V
1kV
1.2kV
1.5kV
2kV
2.5kV
3kV
4kV
5kV
6kV
8kV
10kV
12kV
560 561
680 681
820pF
X7R
820 821
1.0nF
1.0nF 102
200/250V
500V
1kV
1.5kV
2kV
3kV
4kV
5kV
200/250V
500V
1kV
1.5kV
2kV
3kV
4kV
5kV
6kV
200/250V
500V
1kV
1.5kV
2kV
3kV
4kV
5kV
6kV
8kV
10kV
1.2nF
1.2 122
1.5nF
1.5nF
1.5 152
1.8nF
1.8 182
2.2 222
2.7nF
2.7 272
3.3nF
3.3 332
3.9 392
4.7nF
4.7nF
4.7 472
5.6nF
5.6nF
5.6 562
6.8nF
6.8nF
6.8 682
8.2nF
8.2nF
8.2 822
10nF
10nF 103
12nF
12 123
15nF
15 153
18nF
18nF
18 183
22nF
22 223
27nF
27nF
27 273
33nF
33nF
33 333
47nF
39 393
47 473
56nF
56nF
56 563
68nF
68 683
100nF
82nF
82 823
100nF 104
120nF
120nF
150nF
120 124
150nF
180nF
150 154 *
180nF
180 184
220 224
270 274
330nF
330nF
330nF
330 334 *
390 394
470 474 *
560nF
680nF
560 564
680nF
680 684
1.0F
820 824
1.0F
1.0F
1.0F 105 *
1.2 125
1.5 155
1.8 185
2.2F
2.2 225 *
2.7 275 *
3.5F
3.3F
3.3 335
3.9 395
X7R
4.7 475
5.6 565 *
6.8 685
8.2 825
10F 106
12 126
15 156
18 186
22F 226

StackiCap range - see page 62 for details.
l = AEC-Q200 approved parts - maximum values.

10Vdc to 12kVdc
Cap
5550 6560 7565 8060
acit
Cod
anc
e
e
100pF 101
120 121
150 151
180 181
220 221
270 271
330 331
390 391
470 471
560 561
680 681
X7R
820 821
1.0nF 102
200/250V
500V
630V
1kV
1.2kV
1.5kV
2kV
2.5kV
3kV
4kV
5kV
6kV
8kV
10kV
12kV
1.2 122
1.2nF
1.5 152
1.8 182
200/250V
500V
630V
1kV
1.2kV
1.5kV
2kV
2.5kV
3kV
4kV
5kV
6kV
8kV
10kV
12kV
2.2nF
2.2 222
200/250V
500V
1kV
1.5kV
2kV
3kV
4kV
5kV
6kV
8kV
10kV
200/250V
500V
1kV
1.5kV
2kV
3kV
4kV
5kV
6kV
8kV
10kV
2.7 272
2.2nF
3.3 332
3.9 392
4.7nF
4.7nF
4.7 472
5.6 562
6.8nF
6.8 682
8.2nF
8.2 822
10nF
10nF
10nF 103
12nF
12 123
15nF
15nF
15nF
15 153
18 183
22nF
22nF
22 223
27 273
33nF
33nF
33 333
39nF
39 393
47nF
47nF
47 473
56nF
56 563
68nF
68 683
82nF
82nF
82nF
82 823
100nF
100nF
100nF 104
120nF
120 124
150nF
150nF
150 154
180nF
180 184
220nF
220 224
270 274
330nF
330 334
390nF
390nF
390 394
470nF
470nF
470 474
560 564
680nF
680 684
820nF
820 824
1.0F
1.0F 105
1.2F
1.2 125
1.5F
1.5 155
1.8F
1.8F
1.8 185
2.2F
2.2 225
2.7 275
3.3F
3.3F
3.3 335
3.9 395
4.7F
X7R
4.7 475
5.6F
5.6 565
6.8 685
8.2F
8.2 825
10F
10F 106
12 126
15F
15 156
18 186
22F 226
Note:
The highlighted parts may be defined as dual-use under export
control legislation as such may be subject to export licence restrictions.
Please refer to page 12 for more information on the dual-use
regulations and contact the Sales Office for further information on
specific part numbers.

Other Popular Sizes - MLC chip range - C0G/NP0
Cap
1515 2520 3333 3530 3640 4540

acit
COG
Cod
anc
e
e
0.33pF p33
0.47 p47
0.50 p50
1.0 1p0
1.2 1p2
C0G/NP0
1.5 1p5
1.8 1p8
2.2 2p2
2.7 2p7
3.3 3p3
200/250V
500V
1kV
2kV
3kV
4kV
3.9 3p9
4.7 4p7
5.6 5p6
6.8 6p8
8.2 8p2
10pF 100
200/250V
500V
630V
1kV
1.2kV
1.5kV
2kV
2.5kV
3kV
4kV *
5kV *
6kV *
8kV *
10kV *
12kV *
12 120
15 150
18 180
22 220
27 270
33 330
39 390
8kV
10kV
200/250V
500V
1kV
1.5kV
2kV
3kV
4kV
5kV
200/250V
500V
1kV
1.5kV
2kV
3kV
4kV
5kV
6kV
200/250V
500V
1kV
1.5kV
2kV
3kV
4kV
5kV
6kV
200/250V
500V
1kV
1.5kV
2kV
3kV
4kV
5kV
6kV
8kV
10kV
47 470
56 560
68pF
68 680
82 820
100pF
100pF 101
120 121
150pF
150 151
180 181
220 221
270 271
330 331
390 391
470 471
560 561
680pF
680pF
680 681
820 821
1.0nF
1.0nF
1.0nF
1.0nF 102
1.2nF
1.2 122
1.5nF
1.5nF
1.5nF
1.5 152
1.8nF
1.8nF
1.8nF
1.8 182
2.2nF
2.2nF
2.2 222
2.7nF
2.7nF
2.7 272
3.3nF
3.3nF
3.3 332
3.9nF
3.9 392
4.7nF
4.7 472
5.6nF
5.6nF
5.6nF
5.6 562
6.8nF
6.8 682
8.2nF
8.2nF
8.2nF
8.2 822
10nF
10nF
10nF
10nF 103 12nF

12nF
12 123
15nF
15nF
22nF (200V)
15 153
18nF
18 183
22nF
22nF
22nF
22 223
27nF
27nF
27 273
33nF
33nF
33 333
39nF
39nF
39 393
47nF
47nF
68nF (200V)
47 473
56nF
56 563
100nF (250V)
68nF
68nF
68 683
120nF (250V)
82nF
82 823
100nF 104
120nF
120nF
120 124
220nF (200V)
150 154
180 184
220 224
270 274
330 334
390 394
470 474
560 564
680 684
820 824
1.0F 105

10Vdc to 12kVdc
Cap
5550 6560 7565 8060
acit
G/NP0
Cod
anc
e
e
0.33pF p33
0.47 p47
0.50 p50
1.0 1p0
1.2 1p2
C0G/NP0
1.5 1p5
1.8 1p8
2.2 2p2
2.7 2p7
3.3 3p3
3.9 3p9
4.7 4p7
5.6 5p6
6.8 6p8
8.2 8p2
10pF 100
12 120
15 150
18 180
22 220
27 270
200/250V
500V
630V
1kV
1.2kV
1.5kV
2kV
2.5kV
3kV
4kV
5kV
6kV
8kV
10kV
12kV
33 330
39 390
47 470
200/250V
500V
630V
1kV
1.2kV
1.5kV
2kV
2.5kV
3kV
4kV
5kV
6kV
8kV
10kV
12kV
56 560
200/250V
500V
1kV
1.5kV
2kV
3kV
4kV
5kV
6kV
8kV
10kV
68 680
82 820
100pF 101
120pF
200/250V
500V
1kV
1.5kV
2kV
3kV
4kV
5kV
6kV
8kV
10kV
120 121
150 151
180 181
220pF
220 221
270 271
330 331
390 391
470pF
470 471
560 561
680pF
680 681
820 821
1.0nF 102
1.2 122
1.5 152
1.8 182
2.2nF
2.2 222
2.7 272
3.3nF
3.9nF
3.3nF
3.3 332
3.9nF
3.9 392
4.7 472
5.6nF
5.6nF
5.6 562
6.8nF
6.8 682
8.2nF
8.2 822
10nF
10nF
10nF 103
12nF
12nF
12nF
12 123
18nF
15nF
15 153
18nF
18 183
22nF
22nF
22 223
27nF
27 273
33nF
33 333
39nF
39nF
39 393
47nF
47nF
47 473
56nF
56 563
68nF
68nF
68nF
68nF
68 683
82nF
82 823
100nF
100nF
100nF
100nF 104
120nF
120 124
150nF
120nF
150nF
150 154
180nF
180nF
180 184
220nF
220 224
270nF
270nF
270nF
270 274
330nF
560nF (200V)
470nF (200V)
330 334
390nF
390 394
470 474
560 564
680 684
820 824
1.0F 105
Note: * These parts may require conformal coating post soldering.

Standard Chip - BX
Manufactured with layer thickness, and minimal voltage coefficient,
to meet BX requirements. BX characteristics are identical to X7R
dielectric with the added restriction that the Temperature-Voltage
Coefficient (TVC) does not exceed -25% at rated voltage, over
-55C to 125C operating temperature.
High Reliability Testing available: HB = MIL-PRF-55681 Group A.
HK = MIL-PRF-38534 Class K. HS = MIL-PRF-123 Group A.
l For dimensions see page 20.

l For termination types see page 6.
l For ordering information see page 22.
Capacitance and Voltage Selection - BX
Size 0402 0504 0603 0805 1005 1206 1210 1808 1812 1825 2221 2225
Min cap. 120pF 120pF 120pF 120pF 120pF 120pF 120pF 150pF 150pF 470pF 470pF 470pF
16V 5.6nF 39nF 27nF 100nF 120nF 270nF 470nF 560nF 1.0F 1.8F 1.5F 2.2F
25V 4.7nF 33nF 22nF 100nF 120nF 270nF 470nF 560nF 1.0F 1.5F 1.2F 1.8F
50V 1.8nF 18nF 12nF 47nF 68nF 120nF 270nF 270nF 560nF 1.2F 1.2F 1.5F
100V 680pF 6.8nF 4.7nF 18nF 18nF 47nF 100nF 100nF 180nF 390nF 330nF 470nF
200V 220pF 1.8nF 12.nF 5.6pF 8.2nF 15nF 27nF 33nF 56nF 100nF 82nF 120nF
250V 680pF 390pF 1.8nF 2.7nF 4.7nF 10nF 10nF 22nF 56nF 47nF 68nF
300V 1.2nF 1.2nF 3.2nF 5.6nF 6.8nF 12nF 39nF 33nF 47nF
400V 680pF 680pF 1.8nF 3.3nF 3.9nF 5.6nF 18nF 18nF 22nF
500V 390pF 470pF 1.0nF 2.2nF 2.2nF 3.9nF 12nF 10nF 15nF
38 Should be ordered as Novacap parts. www.knowlescapacitors.com

Improved ESR Capacitors - BX & X7R
A range of commercial MLC chip capacitors with improved l For dimensions see page 20.
ESR performance. This series has been designed for rugged l Termination options: P = Palladium/Silver
environments in high power broadband coupling and switching N = Nickel barrier 100% Tin (RoHS)
power supplies. The Class II ceramic dielectric (BX or X7R Y = Nickel barrier 90% Tin/10% Lead
B = Copper barrier 100% Tin (RoHS)
dependant on chip size) affords high volumetric efficiency with
E = Copper barrier 90% Tin/10% Lead
negligible piezoelectric effects.
l Capacitance tolerances available 10%, 20%
Please consult the Novacap Sales Office if your specific requirement l For ordering information see page 22.
exceeds our catalog maximums (size, capacitance value and
voltage).
Capacitance and Voltage Selection - BX & X7R - Improved ESR
Size RF0505 RF1111 RF2525

CURRENT RATING VS. CAPACITANCE
Tmax mm ~ inches: 0.057 ~ 1.45* 0.102 ~ 2.59* 0.165 ~ 4.19* 100
30 MHz
Dielectric BX BX X7R
RMS CURRENT (Amps)

Rated Voltage 50 50 100 150 200 250 300

10
470pF
560pF RF0505
680pF RF1111
RF2525
820pF 1
Typical
1000pF 0.001 0.01

CAPACITANCE (F)
0.1
1200pF
1500pF ESR VS. CAPACITANCE
1800pF 1
2200pF 30 MHz
2700pF RF0505
3300pF
ESR (Ohms)
RF1111
3900pF 0.1
RF2525
4700pF
5000pF
5600pF 0.01
Typical
6800pF 0.001 0.01

CAPACITANCE (F)
0.1
8200pF
10nF
Q VS. CAPACITANCE
12nF 100
15nF 30 MHz
18nF
22nF
27nF 10
Q
33nF RF0505
39nF RF1111
47nF 1
RF2525 Typical
50nF 0.001 0.01 0.1

CAPACITANCE (F)
56nF
68nF
82nF SERIES RESONANCE VS. CAPACITANCE

1000
100nF 30 MHz
120nF
FREQUENCY (MHz)
150nF
220nF 100
330nF RF0505
470nF RF1111
560nF RF2525 Typical
680nF 10
0.001 0.01 0.1
820nF CAPACITANCE (F)
1.0F
Note: *Denotes non standard chip thickness. Order code needs to have an X inserted together with
the dimension in inches e.g. X057 where dimension is 0.057
www.knowlescapacitors.com Should be ordered as Novacap parts. 39

High Q Capacitors - Q(MS) & U ranges
The Q(MS) and U ranges offers a very stable High Q material
system that provides excellent, low loss, performance in systems
below 3GHz. Optimised for lowest possible ESR, this range of
high frequency capacitors is suitable for many applications where
economical, high performance is required.
Available in 0402 to 3640 case sizes (0603 & 0805 case sizes
only available in the U range) with various termination options
including FlexiCap.
CapCad capacitor modelling software is now available and
has been developed with an easy to use and readily accessible
comparison tool for choosing the best MLCC to suit the customers
needs. Please consult the Knowles website to launch the software.
Operating Temperature
-55C to +125C
Temperature Coefficient (Typical)
0 30 ppm/C (C0G/NP0)
Insulation resistance 0603 S-parameter downloads are available from:
MS range: >100G at +25C; >10G +125C http://www.knowlescapacitors.com/syfer/en/products/mlc-
U range: 100G or 1000s (whichever is the least) capacitors/ultra-low-esr-capacitors and the Syfer MVP page on
Q Factor the Modelithics website. Please visit the Syfer MVP page for more
>2000 @ 1MHz information at: http://www.modelithics.com/mvp/syfer
Minimum/maximum capacitance values - Q(MS) & U ranges - High Q capacitors
Chip Size 0402* 0603 0505 0805 1206 1111 1210 1812 2220 2225 3640
Min Cap 0.1pF 0.1pF 0.2pF 0.2pF 0.5pF 0.3pF 0.3pF 1.0pF 2.0pF 2.0pF 4.0pF
50V 63V 33pF - 330pF - 2.2nF - - - - - -
100V 22pF - 220pF - 1.5nF 3.3nF 3.3nF 6.8nF 15nF 18nF -
150V 18pF - 180pF - 1.2nF 2.7nF 2.7nF 4.7nF 12nF 15nF -
200V250V 15pF 100pF 150pF 240pF 1.0nF 2.2nF 2.2nF 3.9nF 10nF 10nF -
300V - - 100pF - 680pF 1.5nF 1.5nF 3.3nF 6.8nF 8.2nF -
500V - - - - 330pF 820pF 820pF 2.2nF 4.7nF 5.6nF 15nF
630V - Below 1pF capacitance
- values- - 150pF 390pF 390pF 1.0nF 2.2nF 3.3nF 6.8nF
are available in 0.1pF steps ~
1000V - - - - 82pF 220pF 220pF 680pF 1.5nF 2.2nF 4.7nF
above 1pF capacitance values are
2000V - available in E24
- series values. - - 18pF 68pF 68pF 150pF 470pF 560pF 1.5nF
3000V - - - - 68pF 150pF 220pF 470pF
7 reel 7 reel 7 reel 7 reel 7 reel 7 reel 7 reel 7 reel 7 reel 7 reel
Tape 5000 4000 2500 3000 2500 1000 2000 500 500 500 13 reel
quantities 13 reel 13 reel 13 reel only
13 reel quantities available on request 2000 2000 2000
*0402 size and other values (inc. values < than 0.3pF) and taping quantities may be available on request, consult the Sales Office.
0603 and 0805 sizes only available in the U range and not Q(MS)
L1
W
L2
Dimensions
Range Case Length (L1) Width (W) Max. Thickness (T) Termination Band (L2)
Size mm ~ inches mm ~ inches mm ~ inches mm ~ inches
min max
MS 0402 1.0 0.10 ~ 0.04 0.006 0.50 0.10 ~ 0.02 0.003 0.60 ~ 0.031 0.10 ~ 0.004 0.40 ~ 0.015
U 0603 1.6 0.2 ~ 0.063 0.008 0.8 0.2 ~ 0.032 0.008 0.80 ~ 0.032 0.10 ~ 0.004 0.40 ~ 0.016
MS 0505 1.4 +0.35 -0.25 ~ 0.055 +0.014 -0.01 1.4 0.25 ~ 0.055 0.01 1.27 ~ 0.05 0.13 ~ 0.005 0.5 ~ 0.02
U 0805 2.0 0.3 ~ 0.079 0.012 1.25 0.20 ~ 0.049 0.008 1.3 ~ 0.051 0.13 ~ 0.005 0.75 ~ 0.03
MS 1206 3.2 0.3 ~ 0.126 0.012 1.6 0.20 ~ 0.063 0.008 1.6 ~ 0.063 0.25 ~ 0.01 0.75 ~ 0.03
MS 1111 2.79 +0.51 -0.25 ~ 0.11 +0.02 -0.01 2.79 0.38 ~ 0.113 0.015 1.78 ~ 0.07 0.13 ~ 0.005 0.63 ~ 0.025
MS 1210 3.2 0.3 ~ 0.126 0.012 2.5 0.3 ~ 0.10 0.012 2.0 ~ 0.08 0.25 ~ 0.01 0.75 ~ 0.03
MS 1812 4.5 0.35 ~ 0.18 0.014 3.2 0.3 ~ 0.126 0.012 2.5 ~ 0.10 0.25 ~ 0.01 1.0 ~ 0.04
MS 2220 5.7 0.40 ~ 0.225 0.016 5.0 0.40 ~ 0.197 0.016 4.2 ~ 0.16 0.25 ~ 0.01 1.0 ~ 0.04
MS 2225 5.7 0.40 ~ 0.225 0.016 6.30 0.40 ~ 0.25 0.016 4.2 ~ 0.16 0.25 ~ 0.01 1.0 ~ 0.04
MS 3640 9.2 0.50 ~ 0.36 0.02 10.16 0.50 ~ 0.40 0.02 2.5 ~ 0.10 0.50 ~ 0.02 1.5 ~ 0.06
40 Should be ordered as Syfer parts. www.knowlescapacitors.com

Q(MS) Series - Impedance vs. Frequency - Case size 0505 Q(MS) Series - Impedance vs. Frequency - Case size 1111
1000000 1000000
100000
0.5pF 100pF
100000
1.0pF 470pF
10pF 680pF
Impedance (Ohms)
10000
Impedance (Ohms)
10000
47pF
1000 1000
100 100
0.5pF
10 10
1.0pF
1 10pF 1
39pF
0.1 100pF 0.1
0.01 0.01
1 10 100 1000 3000 1 10 100 1000 3000
Frequency (MHz) Frequency (MHz)
Q(MS) Series - ESR vs. Frequency - Case size 0505 Q(MS) Series - ESR vs. Frequency - Case size 1111
1 1
0.5pF
2.7pF
10pF
ESR (Ohms)
ESR (Ohms)
15pF
0.1 33pF 0.1
0.5pF 100pF
1.0pF 470pF
10pF 680pF
47pF
0.01 0.01
0 500 1000 1500 2000 2500 3000 0 500 1000 1500 2000 2500 3000
Q(MS) Series Q vs. Frequency - Case size 0505 Q(MS) Series Q vs. Frequency - Case size 1111
10000 100000
10000
1000
1000
100
100
0.1 0.5pF
Q
1.0pF 0.1
1 10pF 0.5pF 100pF

39pF 1
1.0pF 470pF
100pF 10pF 680pF
0.1
0.1
47pF
0.01 0.01
100 500 1000 3000 100 500 1000 3000
All performance curves are based on measurements taken with Boonton 34A resonant tube, Agilent E4991A impedance analyser and Agilent 16197A test fixture. Different test methods or
fixtures may give different results. Data is typical and is supplied for indication only.
www.knowlescapacitors.com Should be ordered as Syfer parts. 41

U Series - Impedance vs. Frequency - Case size 0603 U Series - Impedance vs. Frequency - Case size 0805
1000000 100000
100000 100000
10000
Impedance (Ohms)
Impedance (Ohms)
10000
1000
1000
100
100
0.5pF 1.5pF
10
2.7pF 5.6pF
10
1 10pF 10pF
15pF 27pF
1
0.1 33pF 47pF
0.01 0.1
1 10 100 1000 3000 1 10 100 1000 3000
U Series - ESR vs. Frequency - Case size 0603 U Series - ESR vs. Frequency - Case size 0805
1 1
0.5pF 1.5pF
2.7pF 5.6pF
10pF 10pF
15pF 27pF
ESR (Ohms)
ESR (Ohms)
33pF 47pF
0.1 0.1
0.01 0.01
0 500 1000 1500 2000 2500 3000 0 500 1000 1500 2000 2500 3000
U Series Q vs. Frequency - Case size 0603 U Series Q vs. Frequency - Case size 0805
10000
10000
1000 10000
100 1000
100
Q
10
Q
0.5pF 10 1.5pF
1 2.7pF 5.6pF
10pF 1 10pF
0.1 15pF 27pF
33pF 0.1 47pF
0.01
0.01
100 500 1000 3000
0 500 1000 3000
Note: All performance curves are based on measurements taken with Boonton 34A *0402 size and other values (inc. values < than 0.3pF) and taping quantities may be
resonant tube, Agilent E4991A impedance analyser and Agilent 16197A test fixture. available on request, consult the Sales Office.
Different test methods or fixtures may give different results. Data is typical and is 0603 and 0805 sizes only available in the U range and not Q(MS).
supplied for indication only.
Ordering information - High Q capacitors - MS(Q) and U ranges
0805 J 250 4P70 B U T

Chip Capacitance in picofarads Capacitance
Termination Voltage Dielectric Packaging
size (pF) tolerance
0402* J = Nickel barrier 050 = 50V <1.0pF: Insert a P for the decimal point as the first <4.7pF Q = High Q T = 178mm
0603 (100% matte tin 063 = 63V character. eg. P300 = 0.3pF H = 0.05pF version of (7) reel
0505 plating). 100 = 100V Values in 0.1pF steps B = 0.1pF C0G/NP0 R = 330mm
0805 RoHS compliant. 150 = 150V 1.0pF & <10pF: Insert a P for the decimal point as C = 0.25pF U = High Q (13) reel
1206 Lead free. 200 = 200V the second character. eg. 8P20 = 8.2pF D = 0.5pF version of
1111 250 = 250V B = Bulk pack
A = Nickel barrier Values are E24 series <10pF C0G/NP0 - tubs or trays
1210 (Tin/lead plating 300 = 300V B = 0.1pF
1812 500 = 500V 10pF: First digit is 0. Second and third digits are
with min. 10% lead). significant figures of capacitance code. Fourth digit C = 0.25pF
2220 Not RoHS compliant. 630 = 630V D = 0.5pF
2225 1K0 = 1kV is number of zeros. eg. 0101 = 100pF
3640 2K0 = 2kV Values are E24 series 10pF
3K0 = 3kV F = 1%
G = 2%
J = 5%
K = 10%

High Q Capacitors, High Temperature - H range
The Ultra-low ESR H range offers a very stable, X8G High Q
material system that provides excellent low loss performance.
Optimised for lowest possible ESR, the electrode system provides
low metal losses resulting in flatter performance curves and
reduced losses at higher frequencies.
An extended operating temperature range of -55C to +150C
accommodates modern high density micro electronics requirements.
This range of high frequency capacitors is suitable for many
applications where economical, high performance is required.
Operating Temperature
-55C to +150C (EIA X8G)
0 30 ppm/C (EIA X8G)
Insulation resistance
Time constant (Ri xCr) (whichever is the least)
100G or 1000s
Q Factor
>2000 @ 1MHz
Minimum/maximum capacitance values - Ultra-low ESR capacitors - H range
Chip Size 0402 0603 0805

Min Cap 0.1pF 0.1pF 0.2pF
Max Cap 250V 22pF 100pF 240pF
7 reel - 10,000 7 reel - 4,000 7 reel - 3,000

Tape quantities
13 reel - 15,000 13 reel - 16,000 13 reel - 12,000
Note: Below 1pF capacitance values are available in 0.1pF steps. Above 1pF capacitance values are available in E24 series values.
L1
W
L2
Dimensions
Size Length (L1) Width (W) Max. Thickness (T) Termination Band (L2)
mm ~ inches mm ~ inches mm ~ inches mm ~ inches
min max
0402 1.0 0.10 ~ 0.04 0.004 0.5 0.1 ~ 0.02 0.004 0.60 ~ 0.24 0.10 ~ 0.004 0.40 ~ 0.016
0603 1.6 0.2 ~ 0.063 0.008 0.8 0.2 ~ 0.032 0.008 0.80 ~ 0.032 0.10 ~ 0.004 0.40 ~ 0.016
0805 2.0 0.3 ~ 0.079 0.012 1.25 0.20 ~ 0.049 0.008 1.3 ~ 0.051 0.13 ~ 0.005 0.75 ~ 0.03
Ordering information - Ultra-low ESR capacitors - H range

0805 J 250 0101 J H T
Termination Voltage Dielectric Packaging
size (pF) tolerance
0402 J = Nickel barrier 250 = 250V <1.0pF: Insert a P for the decimal point as the first <4.7pF H = Ultra- T = 178mm
0603 (100% matte tin character. eg. P300 = 0.3pF H = 0.05pF low ESR High (7) reel
0805 plating). Values in 0.1pF steps B = 0.1pF Frequency H R = 330mm
RoHS compliant. 1.0pF & <10pF: Insert a P for the decimal point as C = 0.25pF range (13) reel
Lead free. the second character. eg. 8P20 = 8.2pF D = 0.5pF
B = Bulk pack
Values are E24 series <10pF - tubs or trays
10pF: First digit is 0. Second and third digits are B = 0.1pF
significant figures of capacitance code. Fourth digit is C = 0.25pF
number of zeros. eg. 0101 = 100pF D = 0.5pF
Values are E24 series 10pF
F = 1%
G = 2%
J = 5%
K = 10%

High Q Capacitors, High Temperature - H range
Typical performance - 0603 chip size Typical performance - 0805 chip size
0603 H Series Impedance vs. Frequency 0805 H Series Impedance vs. Frequency
1000000 1000000
100000 100000
Impedance (Ohms)
Impedance (Ohms)
10000
10000
1000
1000
100
100
0.8pF 1pF
10
2.7pF 3.9pF
10
1 6.8pF 8.2pF
22pF 39pF
1
0.1 43pF 62pF
0.01 0.1
1 10 100 1000 3000 1 10 100 1000 3000
0603 H Series ESR vs. Frequency 0805 H Series ESR vs. Frequency
10 10
0.8pF 1pF
2.7pF 3.9pF
1 1
6.8pF 8.2pF
ESR (Ohms)
ESR (Ohms)
22pF 39pF
43pF 62pF
0.1 0.1
0.01 0.01
0 500 1000 1500 2000 2500 3000 0 500 1000 1500 2000 2500 3000
0603 H Series Q vs. Frequency 0805 H Series Q vs. Frequency

10000 10000
1000 1000
100 100
10 0.8pF 10 1pF
Q
2.7pF 3.9pF
1 22pF 1 8.2pF
6.8pF 39pF
43pF 62pF
0.1 0.1
0.01 0.01
100 500 1000 3000 100 500 1000 3000

High Q Capacitors, High Power RF - Surface Mount & Ribbon Leaded
A range of ultra-low loss High Q ceramic capacitors with C0G/NP0
characteristics suitable for high power applications where minimal
power loss and very low self heating is demanded.
Capacitance values
1pF to 27nF (High Q)
Chip sizes
2225 and 4040
Operating temperature
-55C to +125C
High Q low ESR dielectrics
(other options available)
Insulation Resistance (IR)
100G min @ 100 Vdc or 1000s (whichever is the less)
DWV up to 8400Vdc
Typical ESR vs Frequency

0.16
0.14
0.12 4040 56pF

4040 18pF
ESR (mohms)
0.10
2225 2.2nF
0.08
2225 39pF
0.06 2225 10pF
0.04 4040 5.1nF
0.02
0.00
20 40 60 80 100 120 140
Frequency (MHz)
ESR Measurement
All ESR figures are measured using a VNA and 2m copper resonant tube and extrapolating to 30MHz by ratio.
Measured data can be supplied on request. Measurement of ESR can vary with test method and components
should only be compared when tested back-to-back on the same equipment under controlled conditions.
High Power RF capacitors - minimum/maximum capacitance values
Case size 25 - 2225 Case size 40 - 4040

Chip size
Min. Max. Min. Max.
200V 6.2nF 10nF 16nF 27nF
500V 5.1nF 5.6nF 13nF 15nF
630V 3.9nF 4.7nF 12nF 12nF
1kV 1.2nF 3.3nF 5.6nF 10nF
2kV 510pF 1.0nF 1.6nF 5.1nF
3kV 1pF 47pF* / 470pF 910pF 1.5nF
4kV - - 620pF 820pF
5kV - - 390pF 560pF
6kV - - 160pF 330pF
7.0kV/7.2kV - - 1pF 56pF** / 150pF

Note: *2225 - 47pF max. for dual rated @2.5kVac 30MHz **4040 - 56pF max. for dual rated @5kVac 30MHz.

High Q Capacitors, High Power RF - Surface Mount & Ribbon Leaded
Surface Mount Ribbon Leaded Silver plated copper ribbon attached with HMP solder - (MP greater than 260C)
2225 4040
12.0 max
(0.473 max)
(0.30 max)
(0.220.02)
7.5 max
9.3 max
5.50.5
L1
(0.366 max)
(0.45 max)
(0.350.02)
11.5 max
8.90.5
W 35 typ
50 typ
L2
(1.378 typ)
(1.97 typ)
(0.173 max)
(0.197 max)
-0.002 )
4.40.5
5.0 max
+0.10
(0.01 +0.004
+0.10
+0.004
0.25 -0.05
0.25 -0.05
0.01 -0.002
Plating finish:
Tin over Ni.
(
Range dimensions - Surface Mount High Power RF capacitors
Chip Length Width Max. Thickness Termination Band

size (L1) (W) (T) L2
mm/inches mm/inches mm/inches mm/inches
min max
5.7 0.04 6.3 0.4 4.2 0.25 1.0
2225 0.225 0.016 0.25 0.016 0.16 0.01 0.04
10.2 0.5 10.2 0.5 4.2 0.5 1.5
4040 0.402 0.020 0.402 0.020 0.16 0.02 0.06
Ordering information - Surface Mount High Power RF capacitors
4040 J 7K0 0470 J Q B AF7

Chip Capacitance Varient
Termination Voltage Capacitance in picofarads (pF) Dielectric Packing
size tolerance Code
2225 J = Nickel barrier 200 = 200V <10pF Insert a P for the <10pF Q = High Q B = Bulk AF7 =
4040 (100% matte tin 500 = 500V decimal point, B = 0.10pF version of packed Standard
plating). 630 = 630V eg 2P20 = 2.2pF. C = 0.25pF C0G/NP0 Variant for
RoHS compliant. 1K0 = 1kV >10pF. 1st digit is 0. D = 0.50pF High Power
Lead free. 2K0 = 2kV 2nd and 3rd digits are significant 10pF applications
3K0 = 3kV figures of capacitance code. The 4th G = 2%
4K0 = 4kV digit is number of 0s following J = 5%
5K0 = 5kV eg. 0470 = 47pF K = 10%
6K0 = 6kV 0512 = 5100pF M = 20%
7K0 = 7kV/
7.2kV
Ordering information - Ribbon Leaded High Power RF capacitors

Lead Variant
4040 B 7K0 0470 G Q B options code
Coating Voltage Dielectric Packing R W001
size (pF) tolerance
2225 B = Uncoated 200 = 200V <10pF Insert a P for the <10pF Q = High Q B = Bulk R = Ribbon W001 =
4040 V = Coated 500 = 500V decimal point, B = 0.10pF version of packed Leaded Standard
with modified 630 = 630V eg 2P20 = 2.2pF. C = 0.25pF C0G/NP0 Variant
silicone lacquer 1K0 = 1kV >10pF. 1st digit is 0. D = 0.50pF W**1 =
2K0 = 2kV 2nd and 3rd digits are 10pF Marked
3K0 = 3kV significant figures of G = 2%
4K0 = 4kV capacitance code. The 4th digit J = 5%
5K0 = 5kV is number of 0s following K = 10%
6K0 = 6kV eg. 0470 = 47pF M = 20%
7K0 = 7kV/ 0512 = 5100pF
7.2kV
Note: For non-magnetic see page 69.

High Q Porcelain Capacitors - CF Series
Capacitance and Voltage Table
Case Size
Cap Cap C06 C11 C17 C18 C22 C40
Code (PF) 0603 0505 1111 1111 2225 3838
0R1 0.1
250V Code 9
250V Code 9
0R2 0.2
0R3 0.3
1KV Code 7
2KV Code G
2.5KV Code B
7.2KV Code H
0R4 0.4
0R5 0.5
0R6 0.6
0R7 0.7
0R8 0.8
0R9 0.9
1R0 1.0
1R1 1.1
1R3 1.3
1R4 1.4
1R5 1.5
1R6 1.6
1R7 1.7
1R8 1.8
1R9 1.9
2R0 2.0
2R1 2.1
2R2 2.2
2R4 2.4
Description 2R7
3R0
2.7
3.0
High Q Porcelain Capacitors SMD Compatibility 3R3
3R6
3.3
3.6
Ultra Temperature Stable Low ESR, High Q 3R9 3.9
4R3 4.3
Capacitance range 0.1 - 5100 pF 4R7 4.7
Operating Range -55 to +125C High Voltage 5R1
5R6
5.1
5.6
High Self-resonance Low Noise Established Reliability 6R2 6.2
6R8 6.8
Functional Applications 7R5 7.5
8R2 8.2
Impedance Matching Power Handling DC Blocking 9R1 9.1
100 10
Bypass Coupling Tuning and Feedback 110 11
Amplifier Matching Networks VCO Frequency Stabilization 120
130
12
13
Filtering, Diplexers and Antenna Matching 150 15
160 16
High RF Power Circuits Oscillators Timing Circuits 180 18
Filters RF Power Amplifiers and Delay Lines 200 20
220 22
240 24
270 27
Dielectric characteristics 300
330
30
33
360 36
200V Code 6
Dielectric Material (Code) C0G/NP0 (CF) 390 39

430 43
470 47
Temperature Coefficient (ppm/C ) 0 15 510 51
560 56
Dissipation Factor (% @ 1MHz Maximum) 0.05 620 62
680 68
750 75
Dielectric Voltage Rating (Volts) Refer to table 820 82
910 91
Withstanding Voltage DWV (Volts) 250% of rated 101 100
111 110
1KV Code 7
3.6KV Code D
500V Code 4
121 120
Insulation @ +25C 106 M min 131 130
151 150
Resistance 161 160
(M Minimum) @ +125C 105 M min 181 180
201 200
221 220
Ageing None
200V Code 6
200V Code 6
241 240
271 270
Piezoelectric Effects None 301 300
1.5KV Code A
331 330
361 360
Dielectric Absorption None 391 390
431 430
2.5KV Code B
471 470
511 510
1KV Code 7
100V
100V
561 560
621 620
681 680
Code 1
Code 1
50V Code 5
50V Code 5
751 750
1KV Code 7
821 820
911 910
102 1000
122 1200
152 1500
500V Code 4
182 1800
222 2200
300V Code 3
272 2700
500V Code 4
332 3300
392 3900
472 4700
512 5100
Reel QTY 4000 3500 2350 2350 500 250
Special capacitance values available upon request.
www.knowlescapacitors.com Should be ordered as DLI parts. 47

Note: This information represents typical device performance.
48 Should be ordered as DLI parts. www.knowlescapacitors.com

Ordering information - CF Series - See Page 21 for complete part number system.
C17 CF 620 J - 7 U N - X 0 T
Chip Capacitance Capacitance Voltage
Dielectric Termination Lead Type Test Level Marking Packaging
size Code (pF) tolerance Code
C06 CF = 1st two digits <10pF 5 = 50V C06 A = Axial X = Standard C06 C06
C11 C0G/NP0 are significant A = 0.05pF 1 = 100V U, S, Z, E, P, Q, Y, W, H, V, R ribbon Y = Reduced 0, 1, 2, 5 T, W, B, S
C17 High Q figures of B = 0.1pF 6 = 200V C11/17 B = Radial Visual C11 C11/17/18
C18 capacitance, C = 0.25pF 9 = 250V T, U, S, Z, E, P, Q, Y, W, H, V, R ribbon 0 T, V, W, B,
C22 3rd digit D = 0.5pF 4 = 500V C = Center A = MIL-
C18 PRF-55681 C17 P, S
C40 denotes 10pF 7 = 1kV ribbon
number of A = 1.5kV U, Q, Y, V, W, H, Z D = Special Group A 0, 1, 2, 5 C22
F = 1% T, B, P, S
zeros, R = G = 2% G = 2kV C22 E = Axial wire C = MIL- C18/22/40
decimal point. J = 5% B = 2.5kV U, S, Z, E, P, Q, Y, W, H, V, R F = Radial wire PRF-55681 0, 1 C40
K = 10% D = 3.6kV C40 N = Chip Group C T, B, P, S, R
Examples: H = 7.2kV
M = 20% T, U, S, P, Q, Y, W, H, V, R Note: C06 only D = Customer
1R0 = 1.0pF available as N Specified
X = GMV
471 = 471pF S = Special (Chip)

High Q Porcelain Capacitors - AH Series
Capacitance and Voltage Table
Case Size
Cap Cap C11 C17 C18 C22 C40
Code (PF) 0505 1111 1111 2225 3838
0R1 0.1
250V Code 9
0R2 0.2
0R3 0.3
1kV Code 7
2kV Code G
2.5kV Code B
7.2kV Code H
0R4 0.4
0R5 0.5
0R6 0.6
0R7 0.7
0R8 0.8
0R9 0.9
1R0 1.0
1R1 1.1
1R3 1.3
1R4 1.4
1R5 1.5
1R6 1.6
1R7 1.7
1R8 1.8
1R9 1.9
2R0 2.0
2R1 2.1
2R2 2.2
2R4 2.4
Description 2R7 2.7
3R0 3.0
High Q Porcelain Capacitors SMD Compatibility 3R3 3.3
3R6 3.6
Positive TC P90 Low ESR, High Q 3R9 3.9
Capacitance range 0.1 - 5100 pF 4R3
4R7
4.3
4.7
Operating Range -55 to +125C High Voltage 5R1 5.1
5R6 5.6
High Self-resonance Low Noise Established Reliability 6R2 6.2
6R8 6.8
7R5 7.5
Functional Applications 8R2 8.2
9R1 9.1
Impedance Matching Power Handling DC Blocking 100 10
Bypass Coupling Tuning and Feedback 110 11
120 12
Amplifier Matching Networks VCO Frequency Stabilization 130 13
150 15
Filtering, Diplexers and Antenna Matching 160 16
High RF Power Circuits Oscillators Timing Circuits 180 18
200 20
Filters RF Power Amplifiers and Delay Lines 220 22
240 24
270 27
Dielectric characteristics 300
330
30
33
360 36
200V Code 6
Dielectric Material (Code) P90 (AH) 390 39

430 43
470 47
Temperature Coefficient (ppm/C ) +90 20 510 51
560 56
620 62
Dissipation Factor (% @ 1MHz Maximum) 0.05 680 68
750 75
820 82
Voltage Rating (Volts) Refer to table 910 91
Dielectric 101 100
Withstanding Voltage 111 110
DWV (Volts) 250% of rated
500V Code 4
1kV Code 7
3.6kV Code D
121 120
131 130
Insulation @ +25C 106 M min 151 150
161 160
Resistance 181 180
(M Minimum) @ +125C 105 M min 201 200
221 220
200V Code 6
200V Code 6
241 240
Ageing None 271 270
301 300
1.5kV Code A
331 330
Piezoelectric Effects None 361 360
391 390
431 430
Dielectric Absorption None
2.5kV Code B
471 470
511 510
100V
100V
1kV Code 7
561 560
621 620
681 680
Code 1
Code 1
50V Code 5
50V Code 5
751 750
1kV Code 7
821 820
911 910
102 1000
122 1200
152 1500
500V Code 4
182 1800
222 2200
300V Code 3
272 2700
500V Code 4
332 3300
392 3900
472 4700
512 5100
Reel QTY
3500 2350 2350 500 250
Horizontal
Special capacitance values available upon request.


Ordering information - AH Series - See Page 21 for complete part number system.
C17 AH 620 J - 7 U A - X 0 T
Chip Capacitance Capacitance Voltage
Dielectric Termination Lead Type Test Level Marking Packaging
size Code (pF) tolerance Code
C11 AH = P90 1st two digits <10pF 5 = 50V C11/17 A = Axial ribbon X = Standard C11 C11/17/18
C17 High Q are significant A = 0.05pF 1 = 100V T, U, S, Z, E, P, Q, Y, M, W, B = Radial Y = Reduced 0, 1, 2, 5 T, V, W, B,
C18 figures of B = 0.1pF 6 = 200V H, V, R ribbon Visual C17 P, S
C22 capacitance, C = 0.25pF 9 = 250V C18 C = Center 0, 1, 2, 3, C22
C40 3rd digit D = 0.5pF 4 = 500V ribbon A = MIL-
U, Z, E, Y, W, H PRF-55681 4, 5 T, B, P, S
denotes 10pF 7 = 1kV D = Special
number of A = 1.5kV C22 E = Axial wire Group A C18 C40
F = 1% U, S, Z, E, P, Q, Y, M, W, H, V, R 0, 1, 2, 5 T, B, P, S, R
zeros, R = G = 2% G = 2kV F = Radial wire C = MIL-
decimal point. J = 5% B = 2.5kV C40 N = Chip PRF-55681 C22/40
K = 10% D = 3.6kV T, U, S, Z, E, P, Q, Y, M, W, Note: C11 only Group C 0, 1
Examples: H = 7.2kV H, V, R
M = 20% available with A, B, D = Customer
1R0 = 1.0pF D or N options Specified
X = GMV
471 = 471pF S = Special

VC1 Residual Capacitors - X7R
The VC1 residual capacitance range MLCCs provide a more
stable capacitance value with voltage - not to drop below 50%
of the 1Vrms 1kHz value, up to full rated DC voltage, at room
temperature.
They can be operated continuously at full rated voltage, but if de-
rated will maintain a larger percentage of their original capacitance
value, e.g. at 80% RV capacitance value equals 60% approx - see
graph.
Defined capacitance value in case sizes from 0805 to 3640, with
voltage rating up to 3kV. Ideal for Power supplies, capacitance
critical circuits, smoothing circuits and EMI suppression.
Typical Performance Curves

Operating Temperature 100%
-55C to +125C 90%
80%
Residual Capacitance
70%
15% 60%
Insulation Resistance at +25C 50%
Time constant (Ri xCr) (whichever is the least) 100G or 1000s 40%
Ageing Rate 30%
Typical 1% per time decade 20%
10%
0%
0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100%
Applied Voltage
Residual Cap Range Typical HV X7R
Minimum/maximum capacitance values - VC1 Capacitors
Chip Size 0805 1206 1210 1808 1812 2220 2225 3640
Min Cap 100pF 150pF 220pF 220pF 470pF 1nF 1nF 2.2nF
250V 12nF 39nF 82nF 82nF 220nF 680nF 1F 1.8F
500V 2.2nF 6.8nF 15nF 15nF 56nF 150nF 220nF 560nF
630V 1.5nF 4.7nF 8.2nF 8.2nF 39nF 100nF 120nF 470nF
1000V 390pF 1.5nF 2.7nF 2.7nF 15nF 39nF 56nF 180nF
1200V - 1nF 2.2nF 2.2nF 10nF 27nF 39nF 120nF
1500V - 560pF 1.2nF 1.2nF 5.6nF 15nF 22nF 68nF
2000V - 270pF 560pF 560pF 3.3nF 10nF 12nF 39nF
2500V - - - - 1.8nF 5.6nF 8.2nF 22nF
3000V - - - - - 3.9nF 5.6nF 12nF
7 reel qty 3,000 2,500 2,000 500 500 500 500 n/a
13 reel qty 12,000 10,000 8,000 2,000 2,000 2,000 2,000 500
Note: Other capacitance values may become available, please contact the Sales Office if you need values other than those shown in the above table.
For dimensions and soldering information, please go to our website www.knowlescapacitors.com
Ordering information - VC1 Capacitors

1206 Y 1K0 0152 K X T VC1
Capacitance
Chip size Termination Voltage Capacitance in picofarads (pF) Dielectric Packaging Suffix
tolerance
0805 Y = FlexiCap 250 = 250V First digit is 0. J = 5% X = X7R T = 178mm
1206 termination base with 500 = 500V Second and third digits are significant K = 10% (7) reel
1210 nickel barrier (100% 630 = 630V figures of capacitance code. M = 20% R = 330mm
1808 matte tin plating). 1K0 = 1kV The fourth digit is number (13) reel
1812 RoHS compliant. 1K2 = 1.2kV of 0s following
2220 1K5 = 1.5kV Example: B = Bulk
2225 2K0 = 2.0kV 0152 = 1500pF pack - tubs
3640 2K5 = 2.5kV
3K0 = 3.0kV

TCC/VCC Capacitors - (BX & BZ) X7R
X7R capacitors with a defined capacitance variation under applied
dc voltage, across the full operating temperature range.
Whilst the capacitance of C0G/NP0 chips does not vary with applied
voltage, standard X7R capacitors exhibit capacitance fluctuation but
with no specified limit.
For applications where a limit is required, Knowles is able to offer
either a B code dielectric (conforms to MIL BX dielectric and
IECQ-CECC 2X1) or R code dielectric (conforms to MIL BZ
dielectric and IECQ-CECC 2C1).
TCC/VCC Capacitors - 2X1 (BX)

Cap
Cap
0603
0805
1206
1210
1808
1812
2220
2225
acit
acit
Cod
Cod
anc
anc
e
e
100pF 101 100pF 101
50V
100V
50V
100V
200V
120 121 120 121

150 151 150 151
180 181 180 181
220 221 220 221
270 271 270 271
330 331 330 331
390 391 390 391
470 471 470 471
560 561 560 561
680 681 680 681
50V
100V
200V
820 821 820 821

1.0nF 102 1.0nF 102
50V
100V
200V
1.2 122 1.2 122

1.5 152 1.5 152
1.8 182 1.8 182
2.2 222 2.2 222
2.7 272 2.7 272
50V
100V
200V
3.3 332 3.3 332

3.9 392 3.9 392
50V
100V
200V
4.7 472 4.7 472

5.6 562 5.6 562
6.8 682 6.8 682
8.2 822 8.2 822
10 103 10 103
12 123 12 123
50V
100V
200V
15 153 15 153
50V
100V
200V
18 183 18 183
22 223 22 223
27 273 27 273
33 333 33 333
39 393 39 393
47 473 47 473
56 563 56 563
68 683 68 683
82 823 82 823
100 104 100 104
120 124 120 124
150 154 150 154
180 184 180 184
220 224 220 224
270 274 270 274
330 334 330 334
390 394 390 394
470 474 470 474
560 564 560 564
680 684 680 684
820 824 820 824
1.0F 105 1.0F 105
1.2F 125 1.2F 125
1.5F 155 1.5F 155
= non RoHS compliant and FlexiCap termination only. Other values available in J, Y (FlexiCap) and F terminations.

TCC/VCC Capacitors - (BX & BZ) X7R
TCC/VCC Capacitors - 2C1 (BZ)
C ap
C ap
0603
0805
1206
1210
1808
1812
2220
2225
acit
acit
Co d
Co d
an c
an c
e
e
100pF 101 100pF 101
50V
100V
50V
100V
200V
120 121 120 121
150 151 150 151
180 181 180 181
220 221 220 221
270 271 270 271
330 331 330 331
390 391 390 391
470 471 470 471
560 561 560 561
680 681 680 681
50V
100V
200V
820 821 820 821
1.0nF 102 1.0nF 102
50V
100V
200V
1.2 122 1.2 122
1.5 152 1.5 152
1.8 182 1.8 182
2.2 222 2.2 222
2.7 272 2.7 272
50V
100V
200V
3.3 332 3.3 332
3.9 392 3.9 392
50V
100V
200V
4.7 472 4.7 472
5.6 562 5.6 562
6.8 682 6.8 682
8.2 822 8.2 822
10 103 10 103
12 123 12 123
50V
100V
200V
15 153 15 153
50V
100V
200V
18 183 18 183
22 223 22 223
27 273 27 273
33 333 33 333
39 393 39 393
47 473 47 473
56 563 56 563
68 683 68 683
82 823 82 823
100 104 100 104
120 124 120 124
150 154 150 154
180 184 180 184
220 224 220 224
270 274 270 274
330 334 330 334
390 394 390 394
470 474 470 474
560 564 560 564
680 684 680 684
820 824 820 824
1.0F 105 1.0F 105
1.2F 125 1.2F 125
1.5F 155 1.5F 155
= non RoHS compliant and FlexiCap termination only. Other values available in J, Y (FlexiCap) and F terminations.
Ordering information - TCC/VCC Capacitors
0603 J 050 0471 J B B ___

Chip Capacitance in Capacitance
Termination Voltage Dielectric Packing Suffix code
size picofarads (pF) tolerance
0603 Y = FlexiCapTM 050 = 50V 1st digit is 0. G = 2% B = 2X1/BX T = 178mm Used for
0805 termination base with Ni barrier 100 = 100V 2nd and 3rd digits are J = 5% released in (7) reel specific
1206 (100% matte tin plating). 200 = 200V significant figures of K = 10% accordance R = 330mm customer
1210 RoHS compliant. capacitance code. M = 20% with IECQ- (13) reel requirements
1808 H = FlexiCap TM The 4th digit is number CECC
1812 of 0s following B = Bulk
termination base with Ni barrier (Tin/lead R = 2C1/BZ pack - tubs
2220 plating with min. 10% lead). eg. 0471 = 470pF released in
2225 Not RoHS compliant. 0824 = 820nF accordance
F = Silver Palladium. RoHS compliant. with IECQ-
CECC
J = Nickel barrier
(100% matte tin plating).
RoHS compliant. Lead free.
A = Nickel barrier
(Tin/lead plating with min. 10% lead).
Not RoHS compliant.

Open Mode and Tandem Capacitors - X7R
Open Mode capacitors have been designed specifically for use in Open Mode capacitor
applications where mechanical cracking is a severe problem and
short circuits due to cracking are unacceptable.
Open Mode capacitors use inset electrode margins, which prevent
any mechanical cracks which may form during board assembly
from connecting to the internal electrodes.
When combined with FlexiCap termination, Open Mode
capacitors provide a robust component with the assurance that
if a part becomes cracked, the crack will be unlikely to result in
short circuit failure.
Open Mode max capacitance (X7R only) = AEC-Q200 qualified
0603 0805 1206 1210 1808 1812 2220 2225
16V 39nF 56nF 150nF 100nF 100nF 470nF 680nF 680nF 1.5F 3.3F 4.7F
25V 33nF 56nF 120nF 220nF 330nF 470nF 560nF 560nF 1.2F 2.2F 3.9F Qualification included cracking the
components by severe bend tests.
Following the bend tests cracked
50/63V 22nF 100nF 220nF 470nF 470nF 1.0F 1.5F 2.7F components were subjected to
endurance / humidity tests, with
100V 6.8nF 27nF 100nF 220nF 220nF 680nF 1.0F 1.5F 1.8F no failures evident due to short
circuits.
200/250V 2.7nF 15nF 68nF 100nF 100nF 330nF 680nF 1.0F Note: Depending on the severity
of the crack, capacitance loss was
between 0% and 70%.
500V - 5.6nF 39nF 68nF 68nF 180nF 330nF 390nF
630V - - 22nF 33nF 27nF 100nF 180nF 220nF
1kV - - 6.8nF 15nF 15nF 47nF 82nF 100nF
Tandem Capacitors have been designed as a fail safe range using a Tandem capacitor
series section internal design, for use in any application where short
circuits would be unacceptable.
When combined with FlexiCap termination, Tandem capacitors
provide an ultra robust and reliable component, for use in the most
demanding applications.
Non-standard voltages are available. For more information please
consult the Sales Office.
Tandem max capacitance (X7R only) = AEC-Q200 qualified
0603 0805 1206 1210 1812 2220 2225

16V 12nF 47nF 150nF 270nF 560nF 1.2F 1.5F
25V 10nF 39nF 120nF 220nF 470nF 1.0F 1.2F Qualification included cracking the
components by severe bend tests.
50/63V 6.8nF 33nF 100nF 180nF 390nF 680nF 1.0F Following the bend tests cracked
components were subjected to
100V 2.2nF 10nF 47nF 82nF 220nF 470nF 680nF endurance / humidity tests, with
no failures evident due to short
circuits.
200/250V 1.0nF 4.7nF 22nF 47nF 100nF 220nF 330nF Note: Depending on the severity
of the crack, capacitance loss was
between 0% and 50%.
Ordering information - Open Mode and Tandem Capacitors

1206 Y 050 0224 K X T ___
Capacitance in Capacitance Dielectric
Chip size Termination Voltage Packaging Suffix code
picofarads (pF) tolerance codes
0603 Y = FlexiCapTM 016 = 16V First digit is 0. Second J = 5% X = X7R T = 178mm M01 =
0805 termination base with 025 = 25V and third digits are K = 10% S = X7R BME (7) reel Open Mode
1206 nickel barrier (100% 050 = 50V significant figures of M = 20% (AEC-Q200) R = 330mm capacitor
1210 matte tin plating). 063 = 63V capacitance code. (13) reel T01 =
1808 RoHS compliant. 100 = 100V The fourth digit is E = X7R
(AEC-Q200 B = Bulk pack - Tandem
1812 200 = 200V number of zeros capacitor
2220 250 = 250V following. product) tubs or trays
2225 500 = 500V Example:
630 = 630V 0224 = 220000pF
1K0 = 1kV

IECQ-CECC range - Specialty High Rel. and approved parts
A range of specialist, high reliability, multilayer ceramic capacitors
for use in critical or high reliability environments. All fully tested /
approved and available with a range of suitable termination options,
including tin/lead plating and Knowles FlexiCap.
Ranges include:
1. Range tested and approved in accordance with
IECQ-CECC QC32100.
2. Range qualified to the requirements of Knowles detail
specification S02A-0100 (based on ESCC 3009).
IECQ-CECC - maximum capacitance values
0603 0805 1206 1210 1808 1812 2220 2225
C0G/NP0 1.5nF 6.8nF 22nF 33nF 33nF 100nF 150nF 220nF

16V
X7R 100nF 330nF 1.0F 1.5F 1.5F 3.3F 5.6F 6.8F
C0G/NP0 1.0nF 4.7nF 15nF 22nF 27nF 68nF 100nF 150nF

25V
X7R 56nF 220nF 820nF 1.2F 1.2F 2.2F 4.7F 5.6F
C0G/NP0 470pF 2.7nF 10nF 18nF 18nF 33nF 68nF 100nF

50/63V
X7R 47nF 220nF 470nF 1.0F 680nF 1.5F 2.2F 3.3F
C0G/NP0 330pF 1.8nF 6.8nF 12nF 12nF 27nF 47nF 68nF

100V
X7R 10nF 47nF 150nF 470nF 330nF 1.0F 1.5F 1.5F
200/ C0G/NP0 100pF 680pF 2.2nF 4.7nF 4.7nF 12nF 22nF 27nF
250V X7R 5.6nF 27nF 100nF 220nF 180nF 470nF 1.0F 1.0F
C0G/NP0 n/a 330pF 1.5nF 3.3nF 3.3nF 10nF 15nF 22nF

500V
X7R n/a 8.2nF 33nF 100nF 100nF 270nF 560nF 820nF
C0G/NP0 n/a n/a 470pF 1.0nF 1.2nF 3.3nF 8.2nF 10nF

1kV
X7R n/a n/a 4.7nF 15nF 18nF 56nF 120nF 150nF
Ordering information - IECQ-CECC range

1210 Y 100 0103 J D T ___
Chip Capacitance in Capacitance Dielectric
Termination Voltage Packaging Suffix code
size picofarads (pF) tolerance Release codes
0603 Y = FlexiCapTM 016 = 16V First digit is 0. <10pF D = X7R T = 178mm Used for
0805 termination base with Ni 025 = 25V Second and third digits B = 0.1pF (2R1) with IECQ-CECC (7) reel specific
1206 barrier (100% matte tin 050 = 50V are significant figures of C = 0.25pF release R = 330mm customer
1210 plating). RoHS compliant. 063 = 63V capacitance code. D = 0.5pF F = C0G/NP0 (13) reel require-
1808 H = FlexiCapTM 100 = 100V 10pF (1B/NP0) with IECQ- ments
1812 200 = 200V The fourth digit is B = Bulk pack
termination base with Ni number of zeros F = 1% CECC release - tubs or trays
2220 barrier (Tin/lead plating with 250 = 250V G = 2%
2225 500 = 500V following B = 2X1/BX released
min. 10% lead). J = 5% in accordance with
Not RoHS compliant. 630 = 630V Example: K = 10%
1K0 = 1kV 0103 = 10nF IECQ-CECC
F = Silver Palladium. M = 20%
R = 2C1/BZ released
RoHS compliant. in accordance with
J = Nickel barrier (100% IECQ-CECC
matte tin plating). For B and R codes
RoHS compliant. Lead free. please refer to TCC/
A = Nickel barrier VCC range for full
(Tin/lead plating with capacitance values
min. 10% lead).
Not RoHS compliant.

Automotive Grade Capacitors - AEC-Q200 range
We offer a range of high quality automotive grade components.
With AEC-Q200 approved ranges up to a voltage rating of 1kV we
provide for the requirements of modern automotive applications
including EV and HEV.
Ranges include :-
1. Standard MLCCs
2. StackiCap - large capacitance/small case size MLCCs
3. Open Mode and Tandem capacitors
4. 3 terminal EMI components
5. X2Y Integrated Passive Component
6. X8R high temperature MLCCs
7. Safety Certified MLCCs
All fully tested / approved and available with a range of suitable
termination options, including tin/lead plating and Knowles
FlexiCap.
AEC-Q200 MLCC range - maximum capacitance values
0603 0805 1206 1210 1808 1812 1825 2220 2225 3640
StackiCap StackiCap StackiCap
3.2mm max 4.5mm max 4.5mm max
thickness thickness thickness
C0G/NP0 470pF 2.7nF 10nF 18nF 8.2nF 39nF - 68nF 68nF - 100nF 220nF -
50/
X7R 33nF 150nF 470nF 1F - 1.5F - 1.8F 3.3F - 3.3F 4.7F -
63V
X8R - 33nF 120nF 220nF 270nF 470nF - - 680nF - 1.0F - -
C0G/NP0 330pF 1.8nF 6.8nF 12nF 8.2nF 27nF - 47nF 47nF - 68nF 180nF -
100V X7R 10nF 47nF 150nF 470nF - 1F - 1.2F 1.5F - 1.5F 3.3F -
X8R - 15nF 56nF 120nF 150nF 220nF - - 470nF - 560nF - -
C0G/NP0 100pF 1nF 3.3nF 6.8nF 6.8nF 15nF - 22nF 33nF - 27nF 82nF -
200/
X7R 5.6nF 27nF 100nF 220nF - 470nF 1.0F 1.0F 1.0F - 1.0F 1.5F -
250V
X8R - 10nF 33nF 68nF 82nF 120nF - - 220nF - 330nF - -
C0G/NP0 - 680pF 2.7nF 6.8nF 5.6nF 15nF - 15nF 22nF - 22nF 56nF -
500V X7R - 15nF 68nF 100nF - 270nF 470nF 560nF 560nF - 680nF 1.0F -
X8R - 3.9nF 18nF 39nF 47nF 100nF - - 180nF - 270nF - -
C0G/NP0 - 560pF 2.7nF 6.8nF 5.6nF 15nF - 8.2nF 15nF - 15nF 39nF -
630V X7R - 10nF 47nF 68nF - 150nF 330nF 180nF 330nF 1.0F 390nF 680nF -
X8R - 1.8nF 3.9nF 10nF 12nF 33nF - - 150nF - 180nF - -
C0G/NP0 - 150pF 1.5nF 2.2nF 2.2nF 3.3nF - 4.7nF 10nF - 10nF 22nF -
1kV X7R - 3.3nF 10nF 22nF - 68nF 180nF 120nF 120nF 470nF 150nF 180nF 1.0F
X8R - 1nF 2.2nF 4.7nF 5.6nF 18nF - - 39nF - 56nF - -
C0G/NP0 - 68pF 390pF 680pF 680pF 3.3nF - 3.9nF 4.7nF - 6.8nF 18nF -
1.2kV X7R - - 3.3nF 10nF - 33nF 100nF 68nF 82nF - 100nF 150nF -
X8R - - 1.8nF 3.9nF 4.7nF 12nF - - 33nF - 39nF - -
C0G/NP0 - 68pF 390pF 680pF 680pF 2.2nF - 2.7nF 4.7nF - 4.7nF 12nF -
1.5kV X7R - - 2.7nF 6.8nF - 22nF - 47nF 47nF - 68nF 100nF -
X8R - - 1.2nF 2.2nF 2.7nF 8.2nF - - 22nF - 27nF - -
C0G/NP0 - 47pF 220pF 470pF 470pF 1.5nF - 1.2nF 2.2nF - 2.2nF 5.6nF -
2kV X7R - - 2.2nF 4.7n - 10nF - 10nF 27nF - 33nF 47nF -
X8R - - 470pF 1.2nF 1.8nF 4.7nF - - 12nF - 18nF - -
C0G/NP0 - - 100pF 180pF 270pF 680pF - - 1.5nF - - - -
2.5kV
X8R - - - - 1.0nF 2.7nF - - 6.8nF - 10nF - -
C0G/NP0 - - 68pF 150pF 220pF 470pF - - 1nF - - - -
3kV
X8R - - - - 680pF 2.2nF - - 4.7nF - 5.6nF - -
Note: See page 62 for full details of the StackiCap range.
Safety Certified Capacitors

X1 X2 Y2/X1 Y2/X1 X2
Approval PY2 SP SP B16 B17
Dielectric
Body
1808 1812 1808 2211 2215 2220 2220
C0G/NP0 TV, UL 4.7pF - 390pF 4.7pF - 390pF 4.7pF - 1.5nF 4.7pF - 1.5nF 820pF - 1.0nF - -
150pF - 22nF
X7R TV, UL 150pF - 1nF 150pF - 2.2nF 150pF - 4.7nF 100pF - 3.9nF 2.7nF - 3.9nF 150pF - 5.6nF
(TV approval only)
Note: See page 66, 67 for full details of 250Vac Safety Certified AC Capacitors and ordering information.

Automotive Grade Capacitors - AEC-Q200 range
AEC-Q200 range - Open Mode - max capacitance values
0603 0805 1206 1210 1808 1812 2220 2225

X7R X7R X7R X7R X7R X7R X7R X7R
16/25V - 56nF 220nF 470nF - - - -
50/63V 22nF 100nF 220nF 470nF 470nF 1.0F 1.5F 2.7F
100V 6.8nF 27nF 100nF 220nF 220nF 680nF 1.0F 1.5F
200/250V 2.7nF 15nF 68nF 100nF 100nF 330nF 680nF 1.0F
500V - 5.6nF 39nF 68nF 68nF 180nF 330nF 390nF
630V - - 22nF 33nF 27nF 100nF 180nF 220nF
1kV - - 6.8nF 15nF 15nF 47nF 82nF 100nF
See page 56 for full details of the product range.
AEC-Q200 range - Tandem - max capacitance values
0603 0805 1206 1210 1812

X7R X7R X7R X7R X7R
50/63V 6.8nF 33nF 100nF 180nF 390nF
100V 2.2nF 10nF 47nF 82nF 220nF
200/250V 1.0nF 4.7nF 22nF 47nF 100nF
See page 56 for full details of the product range.
AEC-Q200 range - 3 Terminal EMI Components (E01 & E07) - max capacitance values
E01 E07
0805 1206 1806 0805 1206 1806
C0G/NP0 820pF 1.0nF 2.2nF 220pF 1nF 1.5nF
50V
X7R 47nF 100nF 200nF 47nF 100nF 200nF
C0G/NP0 560pF 1.0nF 2.2nF 120pF 560pF 680pF
100V
X7R 15nF 15nF 68nF 15nF 15nF 68nF
Note: For some lower capacitance parts, higher voltage rated parts may be supplied. See page 92 for full details of the product range.
AEC-Q200 range - X2Y Integrated Passive Components (E03) - capacitance values
0805 1206 1410 1812

C0G/NP0 390pF - 470pF 1.2nF - 1.5nF 4.7nF - 5.6nF 8.2nF - 10nF
50V
X7R 18nF - 33nF 56nF - 150nF 180nF - 330nF 390nF - 560nF
C0G/NP0 10pF - 330pF 22pF - 1.0nF 100pF - 3.9nF 820pF - 6.8nF
100V
X7R 470pF - 15nF 1.5nF - 47nF 4.7nF - 150nF 8.2nF - 330nF
Note: For some lower capacitance parts, higher voltage rated parts may be supplied. See page 94 for full details of the product range.
Ordering information - AEC-Q200 ranges

1210 Y 100 0103 K S T ___
size picofarads (pF) tolerance Release codes
0603 Y = FlexiCapTM 050 = 50V First digit is 0. F = 1% S = X7R T = 178mm WS2 =

0805 termination base with Ni 063 = 63V Second and third digits G = 2% (BME) AEC-Q200 (7) reel StackiCap
1206 barrier (100% matte tin 100 = 100V are significant figures J = 5% E = X7R R = 330mm M01 =
1210 plating). RoHS compliant. 200 = 200V of capacitance code. K = 10% (2R1) AEC-Q200 (13) reel Open Mode
1808 H = FlexiCapTM 250 = 250V M = 20%
1812 500 = 500V The fourth digit is A = C0G/NP0 B = Bulk pack T01 =
termination base with Ni number of zeros (1B/NP0) AEC-Q200 - tubs or trays Tandem
1825 barrier (Tin/lead plating with 630 = 630V
2220 1K0 = 1kV following T = X8R with E01 & E07=
min. 10% lead).
2225 Not RoHS compliant. 1K2 = 1.2kV Example: AEC-Q200 release 3 terminal EMI
3640 1K5 = 1.5kV 0103 = 10nF component
J = Nickel barrier 2K0 = 2kV
(100% matte tin plating). E03 =
2K5 = 2.5kV X2Y product
RoHS compliant. Lead free. 3K0 = 3kV
Note:
A = Nickel barrier (Tin/lead
AEC-Q200
plating with min. 10% lead).
X7R is only
Not RoHS compliant.
available
in Y or H
termination.

High Capacitance Chip - X7R, X5R
A range of High Capacitance value BME MLC chip capacitors, in stable
Class II dielectrics X7R and X5R, with a spread of capacitance values
offered up to 100F.
Comparable circuit designs can be achieved at typically a third to a
fifth of the capacitance values because of the low ESR characteristics
these parts exhibit. As a consequence they are also ideal to replace
Tantalum and Low ESR Electrolytic Capacitors without polarity
concerns. They find application as power supply bypass capacitors,
smoothing capacitors, input/output filters in DC-DC Converters and in
digital circuits and LCD modules.
Parts are RoHS Compliant and suitable for reflow soldering process.
l Nickel Barrier terminations with tin, tin/lead or gold flash

l Capacitance tolerances available: 10%, 20%
l Available
with high reliability screening. Contact the Knowles
Capacitors Sales Office for details
Capacitance values - High Capacitance Chip
Size 0402 0603 0805 1206 1210 1812
Tmax inches: 0.024 0.035 0.054 0.072* 0.085* 0.110* 0.110*

mm:
0.61 0.89 1.37 1.83 2.16 2.79 2.79
Dielectric X7R X5R X7R X5R X7R X5R X7R X5R X7R X5R X7R X5R X7R X5R
4V 22F 100F -
1F
4.7F
6.3V 470nF 2.2F
10F
22F 47F 47F 47F 100F -
4.7F
4.7F
10V 1F 2.2F
10F
10F 10F 22F 22F 22F 47F -
15nF
220nF
22nF 470nF
470nF
33nF 100nF 2.2F 1.0F 4.7F 10F 4.7F
16V 47nF
100nF
1F 4.7F 2.2F 10F
10F
22F 10F
22F -
220nF
100nF 4.7F
470nF
220nF
6.8nF 220nF
1.0F 2.2F
10nF 10nF 470nF 470nF 2.2F 4.7F 3.3F 4.7F
25V 47nF 220nF 1.0F 1.0F
2.2F
4.7F
4.7F
10F 4.7F 10F
22F -
4.7F 10F
100nF 2.2F
2.2F
35V 4.7F
10F -
220nF 470nF
100nF 220nF
220nF 470nF 1.0F 4.7F
50V 10nF 100nF
470nF
470nF 470nF
1.0F 2.2F
4.7F 1.0F 4.7F
10F
-
1.0F 1.0F
2.2F 4.7F
1.0F 1.0F
100V 100nF 220nF 1.0F
2.2F 2.2F
-
* Denotes non standard chip thickness. Order code needs to have an 'X' inserted Denotes only available
together with the dimension in inches -e.g. X072 where dimension is 0.072". in 20% capacitance tolerance

High Capacitance Chip - X7R, X5R
Comparison with other dielectric capacitors
Impedance Curves ESR Characteristics

10,000
1,000
10
100
Impedance ()
Impedance ()
10 1
1
0.1
0.1
22F Tantalum Cap +0.1F MLC, standard 0.01 4.7F, MLC
0.01 4.7F MLC 10F, Tantalum
10F MLC 47F, Aluminum
0.001 0.001
1 10 100 1,000 10,000 100,000 1 10 100 1,000 10,000 100,000
Frequency (KHz) Frequency (KHz)
X7R (BB) Stable X5R (BW) Stable
Operating temperature range: -55C to 125C -55C to 85C
Temperature coefficient: 15% DC Max. 15% DC Max.
3.5% max except: 5% max except:

0402 > 0.1F = 5%, 1206 > 2.2F = 10%, 0402 > 1.0F = 10%, 1210 > 10F = 10%
Dissipation factor: 0603 > 0.22F = 10%, 1210 > 4.7F = 5%, 0603 > 1.0F = 10%,
0805 > 1.0F = 5%, 1210 > 22F = 10% 0805 > 4.7F = 10%,
0805 > 2.2F = 10%, 1206 > 4.7F = 10%,
>10GW or >100WF >10GW or >100WF

Insulation resistance @25C:
whichever is less whichever is less
Dielectric withstanding voltage: 250% 250%
Ageing Rate: X7R 3.5% typical X5R 5% typical
1KHz, 1.0 0.2 VRMS
Test parameters @ 25C: 1KHz, 1.0 0.2 VRMS

120Hz, 0.5 0.1 VRMS
for 22F, 47F & 100F
Ordering information - High Capacitance Chip Capacitors

1206 W 476 K 6R3 N X080 T
Chip
Dielectric Capacitance Tolerance Voltage-VDCW Termination Thickness option Packing
sizes
0402 BB* = X7R Value in Picofarads. K = 10% Two significant N = Nickel Barrier Blank = Standard No suffix = Bulk
0603 BW*= X5R Two significant figures, M = 20% figures, followed by (100% tin) thickness T = Tape & Reel
0805 followed by number number of zeros. Y = Nickel Barrier X = special thickness,
1206 of zeros: R denotes decimal (90% tin/10% lead) specified in inches:
1210 476 = 47F point: X085 = 0.085
1812 (47,000,000pF) 6R3 = 6.3V NG = Nickel Barrier
501 = 500V Gold Flash
*Formerly
B & W codes
Note: BME parts available with added high reliability test. Consult the factory.

StackiCap Capacitors - X7R
The StackiCap range offers a significant reduction in PCB real
estate for an equivalent capacitance value when board space is at a
premium. For example, a standard 150nF chip in a 8060 case size is
now available in a much smaller 3640 case size.
Knowless unique patented* construction and FlexiCap termination
material make the StackiCap range suitable for applications
including: power supplies, lighting, aerospace electronics and
high voltage applications where a large amount of capacitance is
required. Further developments are on-going, please contact the
Sales Office for details of the full range.
* StackiCap technology is protected by international patents (pending) EP2847776,
WO2013186172A1, US20150146343A1 and CN104471660A.
Maximum capacitance Insulation resistance

Up to 5.6F Time Constant (RxCr) (whichever is the least - 500s or 500M)
Maximum voltage
Up to 2kV
Maximum capacitance values - StackiCap Capacitors
Chip Size 1812 2220 3640

200/250V 1.0F 2.2F 5.6F
500V 470nF 1.2F 2.7F
630V 330nF 1.0F 2.2F
1kV 180nF 470nF 1.0F
1.2kV 100nF 220nF 470nF
1.5kV 56nF 150nF 330nF
2kV 33nF 100nF 150nF
= AEC-Q200
Ordering information - StackiCap Capacitors

1812 Y 500 0474 K J T WS2
Capacitance in Capacitance
Chip size Termination Voltage Dielectric Packaging Suffix code
picofarads (pF) tolerance
1812 Y = FlexiCap 200/250 = 200/250V First digit is 0. Second J = 5% J = X7R T = 178mm WS2
2220 termination base with nickel 500 = 500V and third digits are K = 10% (BME) (7) reel
3640 barrier (100% matte tin plating). 630 = 630V significant figures of M = 20% E = X7R R = 330mm
RoHS compliant. Lead free. 1K0 = 1kV capacitance code in (2R1) (13) reel
H = FlexiCap 1K2 = 1.2kV picofarads (pF). Fourth AEC-Q200
1K5 = 1.5kV digit is number of zeros B = Bulk pack -
Termination base with nickel S = X7R tubs or trays
barrier (Tin/lead plating with 2K0 = 2kV eg. 0474 = 470nF (BME)
minimum 10% lead). Values are E12 series AEC-Q200
Not RoHS compliant.
X = X7R
Reeled quantities - StackiCap Capacitors
178mm (7) Reel
330mm (13) Reel

1812
500
2,000
2220
500
2,000
3640
-
500
Note: Parts in this range may be defined as dual-use under export control legislation as
StackiCap
such may be subject to export licence restrictions.
Please refer to page 12 for more information on the dual-use regulations and contact
the Sales Office for further information on specific part numbers.

NC Capacitors - X7R
MLCCs are particularly suitable for high voltage applications where
small size is required. For standard high voltage capacitors a
coating may be required to be applied post soldering.
The NC range is designed to achieve the maximum capacitance
range possible for a given component size and high voltage, but
100% coating of the chip after mounting, including especially
between the board and the component (between the mounting
pads) is mandatory to ensure flashover does not occur. To ensure
the coating achieves total coverage around all four exposed sides of
the chip, it may be necessary to slot or cut the PCB under the chip.
Knowles / Syfer application note AN0043 gives more information on
the coating requirements.
This range is fully compliant with the RoHS, REACH and WEEE
directives.
Operating Temperature Insulation Resistance at +25C

-55C to +125C Time constant (Ri xCr) (whichever is the least) 100G or 1000s
Temperature Coefficient (Typical) Ageing Rate
15% Typical <2% per time decade
Minimum/maximum capacitance values - NC Capacitors
Chip Size 1206 1210 1808 1812 2220

Min Cap 220pF 680pF 330pF 470pF 1.0nF
2000V 3.3nF 5.6nF 5.6nF 12nF -
2500V 2.7nF 4.7nF 4.7nF 8.2nF 22nF
3000V 1.5nF 3.3nF 3.3nF 4.7nF 10nF
4000V - - 2.2nF 3.3nF 6.8nF
5000V - - - - 4.7nF
7 reel qty 2,500 2,000 500 500 500
13 reel qty 10,000 8,000 2,000 2,000 2,000
Note: Other capacitance values may become available, please contact the Sales Office if you need values other than those shown in the above table.
For dimensions and soldering information, please go to our website www.knowlescapacitors.com.
Ordering information - NC Capacitors

1206 J 3K0 0102 K X T NC
Termination Voltage Dielectric Packaging Suffix
size (pF) tolerance
1206 Y = FlexiCap termination 2K0 = 2kV First digit is 0. J = 5% X = X7R T = 178mm NC Range
1210 base with nickel barrier 2K5 = 2.5kV Second and third digits are K = 10% (7) reel
1808 (100% matte tin plating). 3K0 = 3kV significant figures of M = 20% R = 330mm
1812 RoHS compliant. 4K0 = 4kV capacitance code. (13) reel
2220 Lead free. 5K0 = 5kV Fourth digit is number of zeros
eg. 0102 = 1000pF B = Bulk
J = Nickel barrier pack - tubs or
(100% matte tin plating). Values are E24 series
trays
RoHS compliant. Lead free.

250Vac Rated 50/60Hz AC Capacitors - C0G/NP0 & X7R
Industry wide standard multilayer ceramic capacitors are supplied
with a DC rating only. For AC use, Surge and Safety capacitors
with an AC rating of 250Vac have been available but the
capacitance range is limited as a result of the strict impulse and VP
requirements in the international standards. Knowles Technology
have developed a range which provides a solution for use at up to
250Vac 60Hz continuous use and provides for non safety-critical
applications where extended capacitance ranges are required.
Capacitance range
Case sizes 0805 to 2220 are available in both X7R and C0G/NP0
dielectrics with capacitances of up to 120nF. The capacitance
ranges are divided into four groups which are based on the
voltage coefficient of capacitance, C0G/NP0 which has negligible
capacitance shift with applied voltage and three subgroups of X7R.
Type A with 30% maximum capacitance shift 0V-240V, Type B
with +30% to -50% maximum capacitance shift 0V-240V and Type
C with +30 to -80% maximum capacitance shift 0V to 240V.
250Vac Rated 50/60Hz AC capacitors - minimum/maximum capacitance values

Chip size 0805 1206 1210 1808 1812 2220
C0G/NP0 1.0pF - 470pF 1.0pF - 1.2nF 4.7pF - 2.2nF 4.7pF - 2.2nF 10pF - 5.6nF 10pF - 10nF
X7R A
560pF - 1.5nF 1.5nF - 10nF 2.7nF - 22nF 2.7nF - 22nF 6.8nF - 56nF 12nF - 120nF
30%
X7R B
1.8nF - 3.3nF 12nF 27nF 27nF 68nF - 82nF -
+30% -50%
X7R C
3.9nF - 10nF 15nF - 47nF 33nF - 100nF 33nF - 100nF 100nF - 120nF -
+30% -80%
Note: X7R A) has a VCC of 30% over 0 to 240Vac 60Hz
X7R B) has a VCC of +30% to -50% over 0 to 240Vac 60Hz
X7R C) has a VCC of +30% to -80% over 0 to 240Vac 60Hz
Measurement conditions described in Knowles Application Notes AN0033. Please see our website www.knowlescapacitors.com for further details.
Ordering information - 250Vac Rated 50/60Hz AC capacitors

1812 Y A25 0103 K J T
Capacitance in picofarads Capacitance Dielectric
Chip size Termination Voltage Packaging
(pF) tolerance codes
0805 Y = FlexiCapTM A25 = 250Vac <10pF Insert a P for the decimal point, <10pF C = C0G/NP0 T = 178mm
1206 termination base 60Hz eg P300 = 0.3pF, 8P20 = 8.2pF. B = 0.1pF J = X7R (BME) (7) reel
1210 with nickel barrier 10pF 1st digit is 0. 2nd and 3rd digits are C = 0.25pF R = 330mm
1808 (100% matte tin D = 0.5pF X = X7R
significant figures of capacitance code. The (13) reel
1812 plating). 4th digit is number of 0s following 10pF
2220 RoHS compliant. B = Bulk pack -
eg. 0103 = 10nF F = 1% tubs or trays
J = Nickel barrier G = 2%
(100% matte tin J = 5%
plating). K = 10%
RoHS compliant. M = 20%
Lead free.

250Vac Safety Certified AC Capacitors
Safety Certified capacitors comply with international UL and TV
specifications to offer designers the option of using a surface
mount ceramic multilayer capacitor to replace leaded film types.
Offering the benefits of simple pick-and-place assembly, reduced
board space required and lower profile, they are also available in a
FlexiCap version to reduce the risk of mechanical cracking.
Knowless high voltage capacitor expertise means the range offers
among the highest range available of capacitance values in certain
case sizes. Applications include: modems, AC-DC power supplies
and where lightning strike or other voltage transients represent a
threat to electronic equipment.
Surface mount multilayer ceramic capacitors Certification specifications for larger sizes include IEC/EN60384-
Meet Class Y2/X1, X1 and X2 requirements 14, UL/CSA60950 and UL60384-14
Approved for mains ac voltages, up to 250Vac Surface mount package
Approved by UL and TV Reduces board area and height restrictions
Sizes 1808, 1812, 2211, 2215 and 2220 Reduced assembly costs over conventional through hole
components
Smaller sizes suitable for use in equipment certified
to EN60950 FlexiCap option available on all sizes
Class Rated voltage Impulse voltage Insulation bridging May be used in primary circuit
Y1 250Vac 8000V Double or reinforced Line to protective earth

Y2 250Vac 5000V Basic or supplementary* Line to protective earth
Y4 150Vac 2500V Basic or supplementary* Line to protective earth
X1 250Vac 4000V - Line to line
X2 250Vac 2500V - Line to line
X3 250Vac None - Line to line
* 2 x Y2 or Y4 rated may bridge double or reinforced insulation when used in series.

250Vac Safety Certified AC Capacitors - Certification Chart
Classification and approval specification - Safety Certified capacitors
CHIP SUFFIX CAP APPROVAL APPROVAL

DIELECTRIC CLASSIFICATION AEC-Q200
SIZE CODE RANGE SPECIFICATION BODY
IEC60384-14
4.7pF X2 EN60384-14 TV
TV & UL
SP
(1)
1808 C0G/NP0 to
NWGQ2, NWGQ8 UL-60950-1, 2nd Ed FULL RANGE
1.5nF UL
CSA 60950-1-07 2nd Ed
IEC60384-14
150pF X2 EN60384-14 TV TV & UL
SP
(1)
1808 X7R to FULL RANGE
NWGQ2, NWGQ8 UL-60950-1, 2nd Ed UL
4.7nF Y TERM ONLY
CSA 60950-1-07 2nd Ed
IEC60384-14
4.7pF X1 EN60384-14 TV
TV & UL
PY2
(1)
1808 C0G/NP0 to
390pF UL
CSA 60950-1-07 2nd Ed
IEC60384-14
150pF X1 EN60384-14 TV TV & UL
PY2
(1)
1808 X7R to 1nF max.
1nF Y TERM ONLY
CSA 60950-1-07 2nd Ed
IEC60384-14
4.7pF X1 EN60384-14 TV
TV & UL
PY2
(1)
1812 C0G/NP0 to
390pF UL
CSA 60950-1-07 2nd Ed
IEC60384-14
150pF X1 EN60384-14 TV TV & UL
PY2
(1)
1812 X7R to 2.2nF max.
2.2nF Y TERM ONLY
CSA 60950-1-07 2nd Ed
IEC60384-14
4.7pF Y2/X1 EN60384-14 TV
TV & UL
SP
(2)
2211 C0G/NP0 to
1nF UL
CSA 60950-1-07 2nd Ed
IEC60384-14
100pF Y2/X1 EN60384-14 TV TV & UL
SP
(2)
NWGQ2, NWGQ8 UL-60950-1, 2nd Ed UL Y & H TERM ONLY
3.9nF
CSA 60950-1-07 2nd Ed
IEC60384-14
820pF Y2/X1 EN60384-14 TV
TV & UL
SP
(2)
2215 C0G/NP0 to
1.0nF UL
CSA 60950-1-07 2nd Ed
IEC60384-14
2.7nF Y2/X1 EN60384-14 TV TV & UL
SP
(2)
NWGQ2, NWGQ8 UL-60950-1, 2nd Ed UL Y & H TERM ONLY
3.9nF
CSA 60950-1-07 2nd Ed
IEC60384-14
150pF Y2/X1 EN60384-14 TV TV & UL
2220 B16 X7R to
FOWX2, FOWX8 UL-60384-14:2010
FULL RANGE
5.6nF UL Y & H TERM ONLY
CSA E60384-14:09
150pF TV ONLY
IEC60384-14
B17
(2)
2220 X7R to X2
EN60384-14
TV 22nF max.
22nF Y & H TERM ONLY
Notes: Termination availability

(1) J & Y terminations only.
BAUART
GEPRFT
(2) J, Y, A & H terminations available.

TYPE
Rheinland APPROVED
Product Safety
PY2 Unmarked capacitors also available as released in accordance with approval specifications. Suffix Code SY2 applies.
SP Unmarked capacitors also available as released in accordance with approval specifications. Suffix Code SPU applies.

250Vac Safety Certified AC Capacitors - Ordering Information
Ordering information - Safety Certified capacitors - Class SPU/SP ranges
1808 J A25 0102 J C T SP
size picofarads (pF) tolerance codes
1808 J = Nickel barrier A25 = 250Vac First digit is 0. <10pF C = C0G/NP0 T = 178mm SP = Surge
2211 (100% matte tin plating). Second and third B = 0.10pF X = X7R (7) reel Protection capacitors
2215 RoHS compliant. Lead free. digits are significant C = 0.25pF R = 330mm (marked and
figures of capacitance D = 0.50pF A = C0G/NP0 approved)
Y = FlexiCapTM termination (1B/NP0) (13) reel
base with nickel barrier code. 10pF SPU = Surge
The fourth digit is AEC-Q200 B = Bulk pack
(100% matte tin plating). F = 1% - tubs or trays Protection capacitors
RoHS compliant. number of zeros G = 2% E = X7R (2B1) (un-marked parts
following. J = 5% AEC-Q200 are in accordance
2211/2215 only
Example: K = 10% with but not
A = Nickel barrier
0102 = 1.0nF M = 20% certified)
(Tin/lead plating with
min. 10% lead).
Not RoHS compliant.
H = FlexiCap
termination base with nickel
barrier (Tin/lead plating
with minimum 10% lead).
Not RoHS compliant.
Ordering information - Safety Certified capacitors - Class PY2/SY2

1808 J A25 0102 J X T PY2
1808 J = Nickel barrier A25 = 250Vac First digit is 0. Second <10pF C = C0G/NP0 T = 178mm PY2 = Safety tested
1812 (100% matte tin plating). and third digits are B = 0.10pF X = X7R (7) reel Surge Protection
RoHS compliant. Lead free. significant figures of C = 0.25pF R = 330mm capacitors (marked
capacitance code. D = 0.50pF A = C0G/NP0 and approved)
Y = FlexiCapTM termination (1B/NP0) (13) reel
base with nickel barrier The fourth digit is 10pF SY2 = Surge
number of zeros AEC-Q200 B = Bulk pack
(100% matte tin plating). F = 1% - tubs or trays Protection capacitors
RoHS compliant. following. G = 2% E = X7R (2B1) (un-marked parts
Example: J = 5% AEC-Q200 are in accordance
0102 = 1.0nF K = 10% with but not
M = 20% certified)
Ordering information - Safety Certified capacitors - Class B16/B17 ranges

2220 J A25 0102 J X T B16
2220 J = Nickel barrier A25 = 250Vac First digit is 0. J = 5% X = X7R T = 178mm B16 = Type A: X1/Y2
(100% matte tin plating). Second and third digits K = 10% E = X7R (2B1) (7) reel B17 = Type B: X2
RoHS compliant. Lead free. are significant figures M = 20% AEC-Q200 R = 330mm
Y = FlexiCap termination
TM of capacitance code. (13) reel
base with nickel barrier The fourth digit is
number of zeros B = Bulk pack
(100% matte tin plating). - tubs or trays
RoHS compliant. following.
A = Nickel barrier Example:

(Tin/lead plating with 0102 = 1.0nF
min. 10% lead).
Not RoHS compliant.
H = FlexiCap
termination base with nickel
barrier (Tin/lead plating
with minimum 10% lead).
Not RoHS compliant.

Non-Magnetic Capacitors - High Q, C0G/NP0, X7R - 16V to 7.2kV
MLC capacitors with silver/palladium (Ag/Pd) terminations have often
been used in medical applications where non-magnetic components
are required, for example in MRI equipment - however, conventional
nickel barrier terminations are not suitable due to their magnetic
properties. In addition, RoHS requirement to use lead-free solders
would cause an increase in soldering temperatures and cause
solder leaching problems for the Ag/Pd termination. This has meant
alternatives have had to be found and one solution is to use a copper
barrier instead of a nickel barrier, with a tin finish on top. This non-
magnetic termination is offered with selected non-magnetic C0G/
NP0, High Q and X7R dielectrics, providing a fully non-magnetic
component (r = 1.0000).
To meet high temperature 260C soldering reflow profiles as detailed
in J-STD-020, C0G/NP0 dielectrics are supplied with FlexiCap or
sintered termination whilst X7R dielectrics are supplied only with the
FlexiCap termination.
Available in chip or ribbon leaded format for certain case sizes
(consult sales office).
High Q, C0G/NP0 - minimum/maximum capacitance values

Chip Size 0402 0603 0505 0805 1206 1111 1808 1812 2220
1210
Min Cap 0.1pF 0.1pF 0.2pF 0.2pF 0.5pF 0.3pF 1.0pF 1.0pF 2.0pF
50V 63V 22pF 100pF 220pF 470pF 1.5nF - - - -
100V 15pF 68pF 150pF 330pF 1.0nF 2.2nF 2.2nF 4.7nF 10nF
150V 10pF 47pF 100pF 220pF 680pF 1.5nF 1.5nF 3.3nF 6.8nF
200V250V 6.8pF 33pF 56pF 150pF 470pF 1.0nF 1.0nF 2.2nF 4.7nF
300V - 27pF 47pF 120pF 390pF 820pF 820pF 1.8nF 3.9nF
500V - - - 68pF 270pF 680pF 680pF 1.5nF 3.3nF
630V - - Tolerance
Min Capacitance - - 150pF 390pF 390pF 1.0nF 2.2nF
1000V - 0.05pF -(<4.7pF) - - 82pF 220pF 220pF 680pF 1.5nF
0.1pF (>4.7pF & <10pF)
2000V - -
1% (>10pF) - - 18pF 68pF 68pF 150pF 470pF
3000V - - - - - - - 68pF 150pF
X7R - minimum/maximum capacitance values

Chip Size 0402 0603 0805 1206 1210 1808 1812 2220
Min Cap 47pF 100pF 330pF 680pF 1.5nF 2.2nF 3.3nF 6.8nF
16V 10nF 100nF 330nF 1.0F 1.5F 1.5F 3.3F 5.6F
25V 6.8nF 68nF 220nF 820nF 1.2F 1.2F 2.2F 4.7F
50V 63V 4.7nF 47nF 150nF 470nF 1.0F 680nF 1.5F 3.3F
100V 1.5nF 10nF 47nF 150nF 470nF 330nF 1.0F 1.5F
200V250V 680pF 5.6nF 27nF 100nF 220nF 180nF 470nF 1.0F
500V - 1.5nF 8.2nF 33nF 100nF 100nF 270nF 560nF
630V - - 4.7nF 10nF 27nF 33nF 150nF 330nF
1000V - - 3.3nF 4.7nF 15nF 18nF 56nF 120nF
Min Capacitance Tolerance
1200V - - - 3.3nF 10nF 10nF 33nF 82nF
5%
1500V - - - 2.7nF 6.8nF 6.8nF 22nF 47nF
2000V - - - 2.2nF 4.7nF 4.7nF 10nF 27nF
High Q, C0G/NP0 High Power RF capacitors - minimum/maximum capacitance values
A range of ultra-low loss High Q Case size 25 - 2225 Case size 40 - 4040
Chip size
ceramic capacitors with C0G/NP0 Min. Max. Min. Max.
characteristics suitable for high 200V 6.2nF 10nF 16nF 27nF
power applications where minimal 500V 5.1nF 5.6nF 13nF 15nF
power loss and very low self 630V 3.9nF 4.7nF 12nF 12nF
heating is demanded.
1kV 1.2nF 3.3nF 5.6nF 10nF
Common applications include MRI 2kV 510pF 1.0nF 1.6nF 5.1nF
body coils and wireless charging
3kV 1pF 47*/470pF 910pF 1.5nF
systems operating in the kHz and
MHz frequencies. 4kV 620pF 820pF
*47pF max. for dual rated
5kV - @2.5kVac 30MHz - 390pF 560pF
Available in chip or ribbon leaded
6kV **56pF
- max. for dual rated
- 160pF 330pF
format. @5kVac 30MHz.
7.0/7.2kV 1pF 56**/150pF
68 Can be ordered as Syfer or Voltronics parts. www.knowlescapacitors.com

Non-Magnetic Capacitors - High Q, C0G/NP0, X7R - 16V to 7.2kV
Surface Mount See page 20 for dimensions Ribbon Leaded Silver plated copper ribbon attached with HMP solder - (MP greater than 260C)
2225 4040
12.0 max
(0.473 max)
(0.30 max)
(0.220.02)
7.5 max
9.3 max
5.50.5
(0.366 max)
L1
(0.45 max)
(0.350.02)
11.5 max
8.90.5
T
35 typ
50 typ
(1.378 typ)
W (1.97 typ)
L2
(0.173 max)
(0.197 max)
-0.002 )
4.40.5
5.0 max
+0.10
(0.01 +0.004
+0.10
+0.004
0.25 -0.05
0.25 -0.05
0.01 -0.002
(
Ordering information - Syfer Non-Magnetic capacitors
1206 2 500 0223 J Q T - -
4040 2 7K0 0470 G Q B - AF9
2225 B 3K0 6P80 G Q B R W221
Chip Termination or Coating Capacitance in picofarads Capacitance Lead
Voltage Dielectric Packing Suffix code
size (Ribbon Leaded) (pF) tolerance Options
0402* 2 = Sintered silver with 50 = 50V <10pF Insert a P for the <4.7pF C = C0G/ T = 178mm R= W221 =
0603 copper barrier* 100 = 100V decimal point, H = 0.05pF NP0 (1B) (7) reel Ribbon Leaded
B = 0.1pF
0505 3 = FlexiCap with 1K0 = 1kV eg 2P20 = 2.2pF. Q = High Q R = 330mm leaded W211 =
C = 0.25pF
0805 copper barrier. 2K0 = 2kV >10pF. 1st digit is 0. D = 0.5pF (13) reel Blank = Leaded
1206 4 = Sintered silver with 3K0 = 3kV X = X7R
2nd and 3rd digits are 4.7pF ~ <10pF (2R1) B = Bulk SM chip marked
1111 copper barrier* 4K0 = 4kV significant figures of B = 0.1pF
1210 5 = FlexiCap base with 5K0 = 5kV pack - tubs **AF9 =
capacitance code. The C = 0.25pF
or trays SM standard
1808 copper barrier. 6K0 = 6kV 4th digit is number of 0s D = 0.5pF
1812 7K0 = 7kV chip
Ribbon Leaded following 10pF
2220 eg. 0470 = 47pF F = 1% **AF9LM =
B = Uncoated
2225 0512 = 5100pF G = 2% SM marked
4040 V = Coated with modified J = 5% standard chip
silicone laquer Values <1pF in 0.1pF steps, K = 10%
above this values are E24 series M = 20%
Note: *0402 - C0G/NP0 and High Q only. Ribbon Leads available. **AF9 and AF9LM suffix code only available in 1111, 2225 and 4040 chip sizes.
Ordering information - Voltronics Non-Magnetic capacitors

11 470 J 1000 W F R
Lead/
Chip size Capacitance Tolerance Voltage Termination Material
Packaging
4 0402* 0R1 0.1pF A 0.05pF 50 = 50V W = Ag/Cu/Sn Q = High Q R = Ribbon
5 0505 100 10pF B 0.1pF 100 = 100V 030ppm/C T* = Tape & Reel
S = Pd/Ag
6 0603*
101 100pF C 0.25pF 1000 =1000V M = Poly/Cu/Sn X = X7R (2R1) B* = Bulk
8 0805*
11 1111 102 1000pF D 0.5pF
2 = Ag/Cu/Sn - (Q dielectric only)
12 1206* F 1%
13 1210* G 2% 3 = Poly/Cu/Sn - (X dielectric only)
18 1812* J 5% B = Silver - (Q ribbon only)
22 2220* K 10% V = Silver, laquer Coated - (Q ribbon only)
25 2225
M 20%
38 3838
40 4040
Note: *Q and X dielectric only. Ribbon Leads available.
www.knowlescapacitors.com Can be ordered as Syfer or Voltronics parts. 69

Non-Magnetic Capacitors, High Power RF - Porcelain High Q
Made from highly stable, low loss dielectric formulations, these
traditional porcelain MLCs are known for their high RF power
handling capability. Available in all industry common case sizes.
The special silver-palladium termination and the proprietary ceramic
formulations guarantee consistent non-magnetic performance.
All MLCs in these series are RoHS compliant. Chips are available
either with standard termination or can be fitted with ribbon leads,
depending on your application.
Description
Porcelain Capacitors Zero TC Low Noise Low ESR, High Q
High Self-resonance Established Reliability
Capacitance range 0.1pF to 5.1nF
Functional Applications
Impedance Matching DC Blocking Bypass Coupling
Tuning and Feedback
High Power RF capacitors - F & H materials - Minimum/maximum capacitance values - see ordering information
Case size 5 Case size 11 Case size 25 Case size 38

Chip Size
0505 1111 2225 3838
Min. Max. Min. Max. Min. Max. Min. Max.
50V - - 680pF 1nF - - - -
100V - - 510pF 620pF - - - -
200V 36pF 100pF 220pF 470pF - - - -
250V 0.1pF 33pF - - - - - -
300V - - - - 2.2nF 2.7nF - -
500V - - 110pF 200pF 1.5nF 1.8nF 2.7nF 5.1nF
1kV - - 0.1pF 100pF 510pF 1.2nF 750pF 2.2nF
1.5kV - - - - 300pF 470pF - -
2kV - - - - - - - -
2.5kV - - - - 0.3pF 270pF 430pF 680pF
3.6kV - - - - - - 110pF 390pF
7.2kV - - - - - - 0.3pF 100pF
Note: Special capacitance values available upon request.
Ordering information - Non-Magnetic capacitors
11 470 J 1000 W F R
Chip size Capacitance Tolerance Voltage Termination Material Lead
5 0505 0R1 0.1pF A 0.05pF 50 50V W Ag/Cu/Sn H AH +9020ppm/C B = Chip

11 1111 100 10pF B 0.1pF 100 100V S Pd/Ag F CF 015ppm/C R =Ribbon
25 2225 101 100pF C 0.25pF 1000 1000V M Poly/Cu/Sn
38 3838 102 1000pF D 0.5pF
F 1%
G 2%
J 5%
K 10%
Note: Available in chip or ribbon leaded format.
Reeled Quantities
Chip Size 0402 0505 0603 0805 1206 1111 1808 1812 2220 2225
1210
7 Reel 10000 2500 4000 3000 2500 10002000 1500 500 500 500
13 Reel 13 reel quantities available on request 6000 2000 2000 2000
Note: Other capacitance values may become available, please contact the Sales Office if you need values other than those shown in the above tables.
For dimensions and soldering information, please go to our website www.knowlescapacitors.com.
70 Should be ordered as Voltronics parts. www.knowlescapacitors.com

Non-Magnetic Capacitors - High Q, X7R
Typical performance data - chip size 0805 High Q Typical performance data - chip size 1111 High Q
ESR vs Frequency ESR vs Frequency

1 1
ESR (Ohms)
ESR (Ohms)
0.1 0.1
1pF 4.7pF 10pF 100pF 1pF 4.7pF 10pF 100pF

0.01 0.01
100 1000 100 1000
Q vs Capacitance Q vs Capacitance
100000 100000
10000 10000
1000 1000
Q
100 100
10 10
150 MHz 500 MHz 1 GHz 150 MHz 500 MHz 1 GHz
1 1
0.1 1 10 100 1000 0.1 1 10 100 1000
Capacitance (pF) Capacitance (pF)
Resonant Frequency vs Capacitance Resonant Frequency vs Capacitance

100000 100000
Frequency (Mhz)
Frequency (Mhz)
10000 10000
1000 1000
Series Parallel Series Parallel
100 100
0.1 1 10 100 1000 0.1 1 10 100 1000
Capacitance (pF) Capacitance (pF)
Typical ESR vs Frequency

0.16
0.14
0.12 4040 56pF

4040 18pF ESR Measurement
ESR (mohms)
0.10 All ESR figures are measured using a VNA and

2225 2.2nF 2m copper resonant tube and extrapolating to
0.08
2225 39pF 30MHz by ratio. Measured data can be supplied
0.06 on request. Measurement of ESR can vary
2225 10pF with test method and components should only
0.04 4040 5.1nF be compared when tested back-to-back on the
same equipment under controlled conditions.
0.02
0.00
20 40 60 80 100 120 140
Frequency (MHz)
115Vac 400Hz Capacitors - C0G/NP0, X7R
115Vac 400Hz capacitors for aerospace applications
Knowles has conducted reliability testing on standard surface mount
ceramic capacitors in order to ensure their performance at 115Vac
400Hz and the associated voltage and frequency transients required
by MIL-STD-704. Self heating will occur due to losses in the
capacitor but has been measured at less than 25C rise with neutral
mounting conditions at room temperature.
115Vac 400Hz Capacitors - minimum/maximum capacitance values
0805 1206 1210 1808 1812 2220

Dielectric Maximum capacitance values
C0G/NP0 1pF - 330pF 1pF - 1.5nF 3.9pF - 3.9nF 4.7pF - 3.9nF 10pF - 10nF 10pF - 15nF
X7R 100pF - 4.7nF 100pF - 18nF 100pF - 39nF 100pF - 39nF 150pF - 82nF 220pF - 100nF
Ordering information - 115Vac 400Hz Capacitors

1206 Y A12 0103 J X T
Termination Voltage Packaging
0805 Y = FlexiCapTM A12 = 115Vac First digit is 0. <4.7pF C = C0G/NP0 T = 178mm

1206 termination base with nickel barrier Second and third digits are H = 0.05pF X = X7R (7) reel
1210 (100% matte tin plating). significant figures of B = 0.10pF R = 330mm
1808 RoHS compliant. capacitance code. C = 0.25pF (13) reel
1812 H = FlexiCapTM The fourth digit is number D = 0.50pF
2220 of B = Bulk pack -
termination base with nickel barrier 4.7pF & <10pF tubs or trays
(Tin/lead plating with min. 10% lead). zeros following. B = 0.10pF
Not RoHS compliant. Example: C = 0.25pF
J = Nickel barrier 0103 = 10nF D = 0.50pF
(100% matte tin plating). 10pF
RoHS compliant. Lead free. F = 1%
A = Nickel barrier G = 2%
(Tin/lead plating with min. 10% lead). J = 5%
Not RoHS compliant. K = 10%
M = 20%

DWV Chip range - C0G/NP0, X7R
High Dielectric Withstand Voltage capacitors (DWV range)
The DWV range is specifically designed for use in applications
where a high Dielectric Withstand Voltage (DWV) is required.
These parts have a continuous rated voltage of 500Vdc minimum
and are 100% DWV tested at the specified voltages to ensure
Flashover (arcing) across the surface does not occur.
High dielectric withstand voltages (DWV) of 1.5kV and 2.5kV

These ratings are based on an application of the DWV voltage for
a period of up to 60 seconds (where the charging current is limited
to 50mA)
Case sizes: 1206, 1210, 1808, 1812, 2220 and 2225
C0G/NP0 and X7R dielectrics
Capacitance values from 4.7pF to 120nF
DWV Capacitors - minimum/maximum capacitance range

1206 1210 1808 1812 2220 2225
C0G/NP0 4.7pF - 330pF 4.7pF - 1nF 4.7pF - 1.2nF 10pF - 2.2nF 100pF - 4.7nF 100pF - 5.6nF
1.5kV
X7R 4.7pF - 3.9nF 4.7pF - 10nF 4.7pF - 12nF 10pF - 33nF 100pF - 100nF 100pF - 120nF
C0G/NP0 4.7pF - 220pF 4.7pF - 560pF 4.7pF - 1nF 10pF - 1.5nF 100pF - 3.3nF 100pF - 3.9nF
2.5kV
X7R 4.7pF - 1nF 4.7pF - 2.2nF 4.7pF - 2.7nF 10pF - 5.6nF 10pF - 15nF 100pF - 18nF
Ordering information - DWV Capacitors

1812 J 1K5 0820 K C T DWV
Dielectric
Chip Capacitance in picofarads Capacitance Dielectric
Termination Withstand Packaging Suffix code
size (pF) tolerance codes
Voltage
1206 Y = FlexiCapTM 1K5 = 1.5kV First digit is 0. Second and third <10pF C = C0G/NP0 T = 178mm Dielectric
1210 termination base 2K5 = 2.5kV digits are significant figures of B = 0.10pF X = X7R (7) reel Withstand
1808 with nickel barrier capacitance code. C = 0.25pF R = 330mm Voltage
1812 (100% matte tin The fourth digit is number of D = 0.50pF (13) reel
2220 plating). zeros following. 10pF
2225 RoHS compliant. B = Bulk pack -
Example: 0820 = 82pF F = 1% tubs or trays
J = Nickel barrier G = 2%
(100% matte tin 10pF
plating). J = 5%
RoHS compliant. K = 10%
Lead free. M = 20%

High Temperature Caps - up to 150C X8R, Commercial, AEC-Q200
The X8R dielectric will operate from -55C to +150C, with a
maximum capacitance change 15% (without applied voltage).
The devices are available in sizes 0805 to 2225, with voltage ranges
from 25V to 3kV and capacitance values from 100pF to 1.8F.
The capacitors have been developed by Knowles to meet demand
from various applications in the automotive and industrial markets
and in other electronic equipment exposed to high temperatures.
The increased use of electronics in automotive under the hood
applications has created demand for this product range.
The X8R range incorporates a specially formulated termination
with a nickel barrier finish that has been designed to enhance the
mechanical performance of these SMD chip capacitors in harsh
environments typically present in automotive applications.
For information, X8R dielectric contains lead within the ceramic
and parts rated less than 250Vdc are not compliant with the EU
2011/65/EU RoHS directive.
Capacitance Range Insulation Resistance (IR)

100pF to 1.8F (0805 to 2225) 100G or 1000secs (whichever is the less).
Temperature Coefficient of Capacitance (TCC) Dielectric Withstand Voltage (DWV)
15% from -55C to +150C 2.5 x rated voltage for 51 seconds,
Dissipation Factor (DF) 50mA charging current maximum.
< 0.025 Ageing Rate
Termination 1% per decade (typical)
Nickel Barrier Tin Plated
X8R High Temperature Capacitors - minimum/maximum cap. values according to the rated d.c. voltage
0805 1206 1210 1808 1812 2220 2225 4540* 7565*
Min cap 100pF 100pF 100pF 100pF 150pF 220pF 330pF 1nF 2.2nF
25V 56nF 180nF 330nF 470nF 680nF 1.5F 1.8F 5.6F 15F
50V 33nF 120nF 220nF 270nF 470nF 680nF 1F 4.7F 12F
100V 15nF 56nF 120nF 150nF 220nF 470nF 560nF 3.9F 10F
200/250V 10nF 33nF 68nF 82nF 120nF 220nF 330nF 2.7F 6.9F
500V 3.9nF 18nF 39nF 47nF 100nF 180nF 270nF 1.2F 3.2F
630V 1.8nF 3.9nF 10nF 12nF 33nF 150nF 180nF - -
1kV 1nF 2.2nF 4.7nF 5.6nF 18nF 39nF 56nF - -
1.2kV - 1.8nF 3.9nF 4.7nF 12nF 33nF 39nF - -
1.5kV - 1.2nF 2.2nF 2.7nF 8.2nF 22nF 27nF - -
2kV - 470pF 1.2nF 1.8nF 4.7nF 12nF 18nF - -
2.5kV - - - 1nF 2.7nF 6.8nF 10nF - -
3kV - - - 680pF 2.2nF 4.7nF 5.6nF - -
Notes: = X8R ranges in yellow available as qualified AEC-Q200. *Only available as Novacap parts.
Ordering information - Syfer X8R High Temperature Capacitors

1206 Y 100 0473 K N T
Chip size Termination Voltage d.c. Capacitance in picofarads (pF) Capacitance tolerance Dielectric codes Packaging
0805 Y = FlexiCap 025 = 25V First digit is 0. J = 5% N = X8R T = 178mm

1206 termination base with 050 = 50V Second and third digits are significant figures K = 10% T = X8R AEC-Q200 (7) reel
1210 nickel barrier (100% 100 = 100V of capacitance code. M = 20% R = 330mm
1808 matte tin plating). 200 = 200V The fourth digit is number of zeros following. (13) reel
1812 250 = 250V Example: 0473 = 47000pF = 47nF
2220 500 = 500V B = Bulk pack -
2225 630 = 630V tubs or trays
1K0 = 1kV
1K2 = 1.2kV
1K5 = 1.5kV
2K0 = 2kV
2K5 = 2.5kV
3K0 = 3kV
Ordering information - Novacap High Temperature Capacitors

4540 S 125 K 501 N T M
Chip Dielectric Capacitance in Capacitance Voltage Termination
Packaging Marking
size codes picofarads (pF) tolerance code code codes
0805 S = X8R Value in J = 5% (X8R) Two significant P = Palladium Silver None = Bulk None =
1206 High Temp. Picofarads. K = 10% (Class II) figures, followed by PR = Palladium Silver* T= Unmarked
1210 (up to 150C) Two significant number of zeros: K = Solderable Palladium Silver* Tape & Reel M=
1812 figures, followed M = 20% (Class II) N = Nickel Barrier* 100% tin
250 = 25 Volts W= Marked
1825 by number of 500 = 50 Volts Y = Nickel Barrier* 90% tin, 10% lead
2225 zeros: C = FlexiCap/Nickel Barrier* 100% tin Waffle Pack
101 = 100 Volts
4540 125 = 1.2nF 251 = 250 Volts D = FlexiCap/Nickel Barrier* 90% tin, 10% lead
7565 501 = 500 Volts S = Solderable Silver*
*Indicates RoHS terminations
74 Should be ordered as Novacap or Syfer parts. www.knowlescapacitors.com

High Temperature Caps - 160C, 200C
A range of chip capacitors, available in sizes 0805 to 7565, designed
to operate from -55C to 160C, (Class II Dielectric) and from
-55C to 200C (C0G/NP0 and Class II Dielectrics). Voltage ratings
of 25V to 4kV.
Maximum capacitance values - 160oC C0G (F)/Class II (G) and 200oC C0G/NP0 (D)/Class II (E) Dielectrics
Size 0805 1206 1210 1515 1808 1812 1825 2225 3530 4540 6560 7565
Tmax 0.054 0.064 0.065 0.130 0.065 0.065 0.080 0.080 0.250 0.300 0.300 0.300
1.37 1.63 1.65 3.30 1.65 1.65 2.03 2.03 6.35 7.62 7.62 7.62
Maximum capacitance values - C0G/NP0 - 160oC (F) and 200oC (D)
Min cap. 0R5 1R0 5R0 5R0 120 220 330 470 221 390 560 101
25V 2.7nF 5.6nF 12nF 22nF 12nF 22nF 56nF 56nF 100nF 180nF 330nF 390nF
50V 1.8nF 3.9nF 8.2nF 18nF 8.2nF 15nF 39nF 47nF 82nF 150nF 270nF 330nF
100V 680pF 1.8nF 3.3nF 10nF 3.3nF 8.2nF 15nF 18nF 56nF 100nF 220nF 270nF
250V 180pF 1.0nF 2.2nF 3.9nF 2.2nF 5.6nF 12nF 18nF 33nF 56nF 120nF 150nF
500V 100pF 390pF 820pF 2.7nF 1.0nF 2.2nF 3.9nF 5.6nF 12nF 27nF 56nF 68nF
1kV 47pF 100pF 220pF 820pF 220pF 560pF 820pF 1.0nF 5.6nF 15nF 33nF 39nF
inches:
2kV mm: 27pF 56pF 180pF 56pF 120pF 180pF 270pF 1.5nF 3.3nF 8.2nF 10nF
3kV 82pF 22pF 56pF 82pF 100pF 560pF 1.5nF 3.3nF 3.9nF
4kV 47pF 12pF 27pF 33pF 47pF 330pF 820pF 1.8nF 2.2nF
Maximum capacitance values - Class II - 160 C (G) and 200 C (E) o o
Min cap. 121 121 121 151 151 151 471 471 102 102 222 222
25V 82nF 220nF 390nF 820nF 330nF 680nF 1.5F 1.8F 3.9F 5.6F 15F 18F
50V 47nF 120nF 220nF 680nF 270nF 470nF 1.0F 1.2F 2.7F 4.7F 12F 15F
100V 18nF 47nF 100nF 270nF 82nF 150nF 470nF 470nF 2.2F 3.3F 8.2F 12F
250V 4.7nF 10nF 27nF 68nF 22nF 47nF 120nF 150nF 560nF 1.2F 2.7F 3.9F
500V 1.0nF 2.2nF 5.6nF 18nF 5.6nF 10nF 27nF 33nF 120nF 330nF 680nF 820nF
1kV 180pF 390pF 820pF 2.7nF 820pF 1.5nF 4.7nF 5.6nF 27nF 68nF 150nF 220nF
2kV 150pF 560pF 220pF 560pF 680pF 6.8nF 18nF 39nF 47nF
3kV 2.7nF 6.8nF 15nF 18nF
4kV 1.2nF 2.7nF 5.6nF 8.2nF
Ordering information - High Temperature Capacitors

1206 G 224 K 250 N X050 H T M
High
Chip Dielectric Capacitance in Capacitance Voltage Termination Thickness
Reliability Packaging Marking
size codes picofarads (pF) tolerance code code codes options
Testing
0805 F = C0G/NP0 Value in F = 1% (C0G/NP0) Two P = Palladium Silver Blank = High None = None =
1206 High Temp. Picofarads. G = 2% (C0G/NP0) significant PR = Palladium Silver* Standard Temperature Bulk Unmarked
1210 (up to 160C) Two significant figures, K = Solderable Palladium Silver* thickness Screening T= M=
1515 figures, followed J = 5% (X8R) followed by N = Nickel Barrier* 100% tin
D = C0G/NP0 X = Tape & Marked
1808 High Temp. by number of K = 10% (Class II) number of Y = Nickel Barrier* 90% tin, 10% lead Special Reel *Marking not
1812 (up to 200C) zeros: zeros: C = FlexiCap/Nickel Barrier* 100% tin thickness,
M = 20% (Class II) W= available
1825 224 = 220nF 250 = 25 D = FlexiCap/Nickel Barrier* 90% tin, specified in on sizes
2225 E = Class II 10% lead Waffle <0603
High Temp. (220,000pF) Volts inches: Pack
3530 S = Solderable Silver* X050 =
4540 (up to 200C)
*Indicates RoHS terminations 0.050
6560 G = Class II Note: Nickel barrier not available
7565 High Temp. in 200C dielectric
(up to 160C)

High Temperature HiT range - 200C - C0G/NP0 & X7R
The HiT range of multilayer ceramic capacitors is suitable for a
variety of high temperature applications including: oil exploration,
geothermal, military, automotive under-hood and avionics.
This range is manufactured to exacting standards using our unique
screen printing process. This provides a high quality component
suitable for demanding applications.
l 200C operating temperature

l 0805 to 2220 chip sizes
l C0G/NP0 and X7R dielectric options
l Capacitance range C0G/NP0 from 4.7pF up to 22nF
l Capacitance range X7R from 100pF up to 3.3F
l Voltage ratings from 16V to 630V
l RoHS compliant / Pb Free
l Sn over Ni termination
l Sample kits available
Temperature Coefficient of Capacitance (TCC)
Insulation Resistance (IR) C0G/NP0 30ppm/C to +125C. X7R 15% to +125C
25C >100G or 1000secs (whichever is the less). Ageing Rate
200C >1G or 10secs (whichever is the less). C0G/NP0 Zero. X7R X7R typically less than 2% per time decade.
Maximum capacitance values - High Temperature HiT range - 200C C0G/NP0 & X7R
Chip Size
Rated 0805 1206 1210 1808 1812 2220
Voltage
C0G/NP0 X7R C0G/NP0 X7R C0G/NP0 X7R C0G/NP0 X7R C0G/NP0 X7R C0G/NP0 X7R
Min Cap 4.7pF 100pF 10pF 100pF 22pF 100pF 22pF 100pF 47pF 150pF 68pF 220pF
16V - 220nF - 470nF - 1.0F - 680nF - 2.2F - 3.3F
25V - 47nF - 150nF - 470nF - 330nF - 1.0F - 1.5F
50V 1nF 15nF 2.2nF 47nF 4.7nF 100nF 4.7nF 100nF 10nF 330nF 22nF 560nF
100V 560pF 6.8nF 1.5nF 18nF 3.9nF 39nF 3.9nF 39nF 6.8nF 100nF 15nF 180nF
200V 150pF 1nF 330pF 4.7nF 1.0nF 10nF 1.0nF 10nF 2.7nF 22nF 4.7nF 47nF
500V 39pF 470pF 150pF 1.0nF 390pF 2.2nF 390pF 2.2nF 1.0nF 5.6nF 2.2nF 15nF
630V 18pF 270pF 100pF 560pF 220pF 1.2nF 220pF 1.2nF 680pF 3.3nF 1.2nF 6.8nF
Note: Other capacitance values may become available, please contact the Sales Office if you need values other than those shown in the above table. For
dimensions and soldering information, please go to our website www.knowlescapacitors.com
Ordering information - Novacap Brand - High Temperature HiT range

1206 RE 331 J 501 N H T
Case size Dielectric Capacitance in picofarads (pF) Capacitance tolerance Voltage Termination Screening Packaging
0805 RD = C0G/NP0 First and Second digits are C0G/NP0 X7R 160 = 16V N = Nickel H = High T = 178mm
1206 (200C) significant figures of capacitance F = 1% J = 5% 250 = 25V barrier Temp (7) reel
1210 RE = X7R code. The fourth digit is number of G = 2% K = 10% 500 = 50V with 100% Screening - 330mm
1808 (200C) 0s following. J = 5% M = 20% 101 = 100V matte tin if required (13) reel
1812 Example : 103 = 10000pF K = 10% 201 = 200V plating. RoHS None = Bulk
2220 R = decimal 501 = 500V compliant. pack - tubs
631 = 630V Lead free.
Ordering information - Syfer Brand - High Temperature HiT range
1206 J 1K0 0103 M X T H20

Chip size Termination Voltage Capacitance in picofarads (pF) Capacitance tolerance Dielectric Packaging Suffix Code
0805 J = Nickel 016 = 16V 1.0pF & <10pF C0G/NP0 X7R G = C0G/ T = 178mm H20
1206 barrier 025 = 25V Insert a P for the decimal point F = 1% J = 5% NP0 (BME) (7) reel HiT range
1210 with 100% 050 = 50V as the second character. G = 2% K = 10% X = X7R R = 330mm
1808 matte tin 063 = 63V e.g., 8P20 = 8.2pF J = 5% M = 20% (13) reel
1812 plating. 100 = 100V 10pF K = 10%
2220 RoHS 200 = 200V First digit is 0. B = Bulk
compliant. 250 = 250V Second and third digits are pack - tubs
Lead free. 500 = 500V significant figures of capacitance
630 = 630V code.
The fourth digit is the number of
zeros following.
e.g., 0101 = 100pF
76 Should be ordered as Novacap or Syfer parts. www.knowlescapacitors.com

Capacitor Assemblies - ST, SM - C0G/NP0, X7R
Our complete testing facility is available for any additional military
testing requirements. Options available include thru-hole and
surface mount lead styles, to make them suitable for mounting on
ceramic substrates or epoxy PCBs.
Consult the Sales Office if your specific requirements exceed our
catalogue maximums (size, cap. value and voltage).
These ranges of both High Capacitance and High Voltage MLC
assemblies are available in C0G/NP0 and X7R dielectrics.
Low ESR and Low ESL are inherent in the design giving the
assemblies a high capability up to 1MHz and offer far superior
performance than either Aluminium or Tantalum electrolytic
capacitors.
They are designed for use in high power or high frequency
applications such as switched mode power supplies, DC-
DC converters, high capacitance discharge circuits and high
temperature filtering/decoupling. They can be made with up to
five same size chips with various lead configurations to safeguard
against thermal and mechanical stresses.
The commercial ST series provide the highest capacitance available In contrast, the High Reliability SM series is designed and tested
and are 100% tested for Dielectric Withstanding Voltage, Insulation for military and industrial applications and tested as per of MIL-
Resistance, Capacitance and Dissipation Factor. PRF-49470 (DSCC 87106), Group A.
Maximum stack height, X dimension - inches/mm NN or NP (no leads) LN (straight leads)

D E D 0.055 E
0.010
No. (1.40
LN
Chip Style Style Style X X 0.25)
of
size NN, NP TJ & TL LN, LJ & LL
chips L 0.250 min 0.020 0.002 0.010
(6.35 min) (0.51 0.05) (0.25)
C
0.100 (2.54)
1812 0.100/2.54 0.180/4.57 N/A TL &
TJ & TJ
TL(tab
(tableads)
leads) 0.025 min / 0.100 max (0.63 min / 2.54 max)
1825 0.100/2.54 0.180/4.57 0.180/4.57
1 2225 0.120/3.05 0.200/5.08 0.200/5.08
D E 0.070
0.010
(1.78
>2225 N/A 0.200/5.08 0.200/5.08 X TL 0.25) TJ
0.005
(0.13)
0.050 min
1812 0.200/5.08 0.280/7.11 N/A S C
(1.27 min)
1825 0.200/5.08 0.280/7.11 0.280/7.11 LJ &
2 LJ & LL
LL (bent
(bentwire leads)
leads)
2225 0.240/6.10 0.320/8.13 0.320/8.13
D E
0.070
>2225 N/A 0.320/8.13 0.320/8.13 0.010
(1.78
LL 0.25)
LJ
X
812 0.300/7.62 0.380/9.65 N/A 0.010
(0.25)
1825 0.300/7.62 0.380/9.65 0.380/9.65
3
C 0.050 min
(1.27 min)
2225 0.360/9.14 0.440/11.2 0.440/11.20 0.020 0.002 (0.51 0.05)
0.100 (2.54)
>2225 N/A 0.440/11.2 0.440/11.20
0.025 min / 0.100 max (0.63 min / 2.54 max)
1812 0.400/10.20 0.480/12.2 N/A Dimensions - inches/mm

1825 0.400/10.20 0.480/12.2 0.480/12.20
4 2225 0.480/12.20 0.560/14.2 0.560/14.20
Size 1812 1825 2225 3640 4540 5550 7565
0.210/ 0.210/ 0.250/ 0.400/ 0.480/ 0.580/ 0.780/
>2225 N/A 0.560/14.2 0.560/14.20 C* 5.33 5.33 6.35 10.20 12.20 14.70 19.80
0.125/ 0.250/ 0.250/ 0.400/ 0.400/ 0.500/ 0.650**/
D* 3.18 6.35 6.35 10.20 10.20 12.70 16.50
1812 0.520/13.20 0.600/15.2 N/A
0.260/ 0.260/ 0.300/ 0.430/ 0.530/ 0.630/ 0.830/
1825 0.520/13.20 0.600/15.2 0.600/15.2 E max 6.60 6.60 7.62 10.90 13.50 16.00 21.10
5 2225 0.635/16.10 0.715/18.2 0.715/18.2 0.180/ 0.180/ 0.220/ 0.360/ 0.450/ 0.550/ 0.750/
L nom 4.57 4.57 5.59 9.14 11.40 14.00 19.10
>2225 N/A 0.715/18.2 0.715/18.2
Leads per side N/A 3 3 4 4 5 6
Notes: 1) *C & D inches 0.025:/mm 0.64: 2) **0.035/0.89
Ordering Information - ST & SM Capacitor Assemblies
ST 3640 B 474 M 101 LJ X W -5 R
Voltage- Thickness No.
Style Size Dielectric Capacitance Tolerance Lead style Packing RoHS
VDCW option Chips
ST = See N = C0G/NP0 Value in Picofarads. F = 1%* Two significant LN = Straight* Specify W = Waffle 1 to 5 250V
Commercial Chart B = X7R Two significant B = 2%* figures, LL = L Lead* standoff T = Tape RoHS
SM = High figures, followed by H = 3%* followed by LJ = J Lead* dimension & Reel*
Reliability number of zeros: J = 5% number of TL = L Tab if less than
825 = 8,200,000pF K = 10% zeros: TJ = J tab max.
(8.2F) M = 20% 101 = 100V NN = Nickel
Z = +80 -20% NP = Pd/Ag
P = +100 -0%
*Consult the
*C0G/NP0 only *Not 1812
sales office

Capacitor Assemblies - ST, SM - C0G/NP0
C0G/NP0 Capacitance and Voltage Selection
Size 1812 1825 2225 3640
Rated Voltage 50V 100V 200V 500V 50V 100V 200V 500V 50V 100V 200V 500V 50V 100V 200V 500V
Cap Code ST SM ST SM ST SM ST SM ST SM ST SM ST SM ST SM ST SM ST SM ST SM ST SM ST SM ST SM ST SM ST SM
10pF 100 1 1 1 1 1 1 1 1
12 120 1 1 1 1 1 1 1 1
15 150 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Number of chips required to
18 180 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 achieve the capacitance value
22 220 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
27 270 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
33 330 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
39 390 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
47 470 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
56 560 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
68 680 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
82 820 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
100pF 101 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
120 121 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
150 151 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
180 181 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
220 221 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
270 271 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
330 331 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
390 391 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
470 471 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
560 561 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
680 681 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
820 821 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
1.0nF 102 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
1.2 122 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
1.5 152 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
1.8 182 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
2.2 222 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
2.7 272 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
3.3 332 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
3.9 392 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
4.7 472 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
5.6 562 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
6.8 682 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
8.2 822 1 1 1 1 1 1 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
10nF 103 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
12 123 1 1 1 1 1 1 1 3 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
15 153 1 1 1 1 1 1 1 3 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1
18 183 1 1 1 1 1 1 1 4 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1
22 223 1 1 1 1 1 1 3 5 1 1 1 1 1 1 2 3 1 1 1 1 1 1 2 2 1 1 1 1 1 1 1 1
27 273 1 1 1 1 2 2 4 1 1 1 1 1 1 2 3 1 1 1 1 1 1 2 3 1 1 1 1 1 1 1 1
33 333 1 1 2 1 2 2 4 1 1 1 1 1 1 2 4 1 1 1 1 1 1 2 3 1 1 1 1 1 1 1 2
39 393 2 1 2 1 2 2 5 1 1 1 1 1 1 3 5 1 1 1 1 1 1 2 4 1 1 1 1 1 1 1 2
47 473 2 2 2 2 2 3 1 1 1 1 1 1 3 1 1 1 1 1 1 3 4 1 1 1 1 1 1 2 2
56 563 2 2 3 3 3 3 1 1 1 1 2 2 4 1 1 1 1 1 1 3 5 1 1 1 1 1 1 2 2
68 683 3 3 3 3 3 3 1 1 2 2 2 2 4 1 1 1 1 2 2 4 1 1 1 1 1 1 2 3
82 823 3 3 3 3 4 4 2 2 2 2 2 2 5 1 1 2 2 2 2 5 1 1 1 1 1 1 2 3
100nF 104 3 3 4 4 5 5 2 2 2 2 2 3 2 2 2 2 2 2 1 1 1 1 1 1 3 4
120 124 4 4 5 5 2 2 2 2 3 3 2 2 2 2 2 2 1 1 1 1 1 1 3 4
150 154 5 5 3 3 3 3 3 4 2 2 3 3 3 3 1 1 1 1 2 2 4 5
180 184 3 3 3 3 4 4 2 2 3 3 3 4 1 1 1 2 2 2 4
220 224 4 4 4 4 5 5 3 3 4 4 4 4 2 2 2 2 2 3 5
270 274 4 4 5 5 4 4 4 4 5 5 2 2 2 2 3 3
330 334 5 5 4 4 5 5 2 2 2 2 3 4
390 394 5 5 2 3 3 3 4 4
470 474 3 3 3 3 4 5
560 564 3 3 4 4 5
680 684 4 4 4 4
820 824 4 4 5 5
1.0F 105 5 5
1.2 125
1.5 155
1.8 185
2.2 225
2.7 275

Capacitor Assemblies - ST, SM - C0G/NP0
C0G/NP0 Capacitance and Voltage Selection Note: Capacitance values are shown as 3 digit code:
2 significant figures followed by the no. of zeros e.g. 183 = 18,000pF.
4540 5550 6560 7565 Size
50V 100V 200V 500V 50V 100V 200V 500V 50V 100V 200V 500V 50V 100V 200V 500V Rated Voltage
ST SM ST SM ST SM ST SM ST SM ST SM ST SM ST SM ST SM ST SM ST SM ST SM ST SM ST SM ST SM ST SM Cap Code
10pF 100
12 120
Number of chips required to 15 150
achieve the capacitance value 18 180
22 220
27 270
33 330
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 39 390
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 47 470
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 56 560
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 68 680
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 82 820
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 100pF 101
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 120 121
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 150 151
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 180 181
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 220 221
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 270 271
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 330 331
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 390 391
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 470 471
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 560 561
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 680 681
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 820 821
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1.0nF 102
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1.2 122
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1.5 152
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1.8 182
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2.2 222
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2.7 272
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 3.3 332
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 3.9 392
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 4.7 472
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 5.6 562
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 6.8 682
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 8.2 822
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 10nF 103
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 12 123
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 15 153
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 18 183
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 22 223
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 27 273
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 33 333
1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 39 393
1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 47 473
1 1 1 1 1 1 2 2 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 56 563
1 1 1 1 1 1 2 2 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 68 683
1 1 1 1 1 1 2 3 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1 82 823
1 1 1 1 1 1 2 3 1 1 1 1 1 1 2 3 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 2 100nF 104
1 1 1 1 1 1 3 4 1 1 1 1 1 1 2 3 1 1 1 1 1 1 2 2 1 1 1 1 1 1 1 2 120 124
1 1 1 1 2 2 3 5 1 1 1 1 1 2 3 4 1 1 1 1 1 1 2 3 1 1 1 1 1 1 1 2 150 154
1 1 1 1 2 2 4 5 1 1 1 1 2 2 3 4 1 1 1 1 1 1 2 3 1 1 1 1 1 1 2 2 180 184
1 1 2 2 2 2 5 1 1 1 2 2 2 3 5 1 1 1 1 1 2 2 4 1 1 1 1 1 1 2 3 220 224
2 2 2 2 2 3 1 1 2 2 2 2 4 1 1 1 1 2 2 3 4 1 1 1 1 1 1 2 3 270 274
2 2 2 2 3 3 2 2 2 2 3 3 5 1 1 2 2 2 2 3 5 1 1 1 1 1 2 3 4 330 334
2 2 2 3 3 3 2 2 2 2 3 3 1 1 2 2 2 2 1 1 1 1 2 2 3 4 390 394
2 3 3 3 4 4 2 2 3 3 3 4 2 2 2 2 3 3 1 1 2 2 2 2 4 5 470 474
3 3 3 3 4 5 2 2 3 3 4 4 2 2 2 2 3 3 1 1 2 1 2 1 4 560 564
3 4 4 4 5 3 3 3 4 4 5 2 2 3 3 3 4 2 2 2 2 2 3 5 680 684
4 4 4 5 3 3 4 4 5 2 2 3 3 4 4 2 2 2 2 3 3 820 824
4 5 5 4 4 4 5 3 3 4 4 4 5 2 2 3 3 3 4 1.0F 105
5 4 5 5 3 3 4 4 5 2 2 3 3 4 4 1.2 125
5 4 4 5 5 3 3 4 4 5 5 1.5 155
5 5 5 5 3 3 4 4 1.8 185
5 4 4 5 5 2.2 225
5 5 2.7 275

Capacitor Assemblies - ST, SM - X7R
X7R Capacitance and Voltage Selection
Size 1812 1825 2225 3640
Vdc 50V 100V 200V 500V 50V 100V 200V 500V 50V 100V 200V 500V 50V 100V 200V 500V
Cap Code ST SM ST SM ST SM ST SM ST SM ST SM ST SM ST SM ST SM ST SM ST SM ST SM ST SM ST SM ST SM ST SM
1.0nF 102 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
1.2 122 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
1.5 152 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
1.8 182 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
2.2 222 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
2.7 272 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
3.3 332 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
3.9 392 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
4.7 472 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
5.6 562 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
6.8 682 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
8.2 822 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
10nF 103 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
12 123 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
15 153 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
18 183 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
22 223 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
27 273 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
33 333 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
39 393 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
47 473 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
56 563 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
68 683 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
82 823 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
100nF 104 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
120 124 1 1 1 1 1 1 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
150 154 1 1 1 1 1 1 2 3 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
180 184 1 1 1 1 1 1 2 3 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
220 224 1 1 1 1 1 1 3 4 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1
270 274 1 1 1 1 1 1 3 5 1 1 1 1 1 1 2 3 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1
330 334 1 1 1 1 1 1 4 1 1 1 1 1 1 2 3 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1
390 394 1 1 1 1 1 1 4 1 1 1 1 1 1 2 4 1 1 1 1 1 1 2 3 1 1 1 1 1 1 1 1
470 474 1 1 1 1 1 1 5 1 1 1 1 1 1 3 4 1 1 1 1 1 1 2 3 1 1 1 1 1 1 1 2
560 564 1 1 1 1 2 2 1 1 1 1 1 1 3 5 1 1 1 1 1 1 2 4 1 1 1 1 1 1 2 2
680 684 1 1 2 2 2 3 1 1 1 1 1 2 4 1 1 1 1 1 1 3 4 1 1 1 1 1 1 2 2
820 824 2 2 2 2 2 3 1 1 1 1 1 2 4 1 1 1 1 1 1 3 5 1 1 1 1 1 1 2 3
1.0F 105 2 2 2 2 3 3 1 1 1 1 2 2 5 1 1 1 1 1 2 4 1 1 1 1 1 1 2 3
1.2 125 2 2 2 2 3 4 1 1 1 2 2 3 1 1 1 1 2 2 4 1 1 1 1 1 1 3 3
1.5 155 2 3 3 3 4 5 2 2 2 2 2 3 1 1 1 1 2 2 5 1 1 1 1 1 1 3 4
1.8 185 3 3 3 3 4 2 2 2 2 3 4 1 2 2 2 2 3 1 1 1 1 1 2 4 5
2.2 225 3 3 4 4 5 2 2 2 3 3 4 2 2 2 2 2 3 1 1 1 1 2 2 5
2.7 275 4 4 4 5 2 3 3 3 4 5 2 2 2 2 3 4 1 1 1 2 2 2
3.3 335 5 5 5 3 3 3 4 4 2 2 3 3 3 4 1 1 2 2 2 3
3.9 395 5 3 3 4 4 5 3 3 3 3 4 5 1 1 2 2 3 3
4.7 475 4 4 4 5 3 3 4 4 5 2 2 2 2 3 3
5.6 565 4 5 5 4 4 4 4 2 2 2 3 3 4
6.8 685 5 4 4 5 5 2 2 3 3 4 5
8.2 825 5 5 2 2 3 4 5
10F 106 3 3 4 4
12 126 3 3 4 5
15 156 4 4 5
18 186 4 5
22 226 5
27 276
33 336
39 396
47 476
56 566 Number of chips required to
68 686 achieve the capacitance value
82 826
100F 107

Capacitor Assemblies - ST, SM - X7R
X7R Capacitance and Voltage Selection Note: Capacitance values are shown as 3 digit code:
2 significant figures followed by the no. of zeros e.g. 183 = 18,000pF.
4540 5550 6560 7565 Size
50V 100V 200V 500V 50V 100V 200V 500V 50V 100V 200V 500V 50V 100V 200V 500V Vdc
ST SM ST SM ST SM ST SM ST SM ST SM ST SM ST SM ST SM ST SM ST SM ST SM ST SM ST SM ST SM ST SM Cap Code
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1.0nF 102
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1.2 122
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1.5 152
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1.8 182
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2.2 222
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2.7 272
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 3.3 332
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 3.9 392
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 4.7 472
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 5.6 562
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 6.8 682
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 8.2 822
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 10nF 103
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 12 123
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 15 153
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 18 183
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 22 223
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 27 273
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 33 333
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 39 393
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 47 473
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 56 563
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 68 683
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 82 823
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 100nF 104
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 120 124
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 150 154
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 180 184
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 220 224
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 270 274
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 330 334
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 390 394
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 470 474
1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 560 564
1 1 1 1 1 1 2 2 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 680 684
1 1 1 1 1 1 2 2 1 1 1 1 1 1 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 820 824
1 1 1 1 1 1 2 3 1 1 1 1 1 1 2 2 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1 1.0F 105
1 1 1 1 1 1 2 3 1 1 1 1 1 1 2 2 1 1 1 1 1 1 2 2 1 1 1 1 1 1 1 2 1.2 125
1 1 1 1 1 1 3 4 1 1 1 1 1 1 2 3 1 1 1 1 1 1 2 2 1 1 1 1 1 1 2 2 1.5 155
1 1 1 1 1 1 3 4 1 1 1 1 1 1 3 3 1 1 1 1 1 1 2 3 1 1 1 1 1 1 2 2 1.8 185
1 1 1 1 1 2 4 5 1 1 1 1 1 1 3 4 1 1 1 1 1 1 2 3 1 1 1 1 1 1 2 3 2.2 225
1 1 1 1 2 2 5 1 1 1 1 1 2 4 5 1 1 1 1 1 1 3 4 1 1 1 1 1 1 3 3 2.7 275
1 1 1 2 2 2 1 1 1 1 2 2 5 1 1 1 1 1 1 3 4 1 1 1 1 1 1 3 4 3.3 335
1 1 2 2 2 3 1 1 1 2 2 2 1 1 1 1 1 1 4 5 1 1 1 1 1 1 3 4 3.9 395
1 1 2 2 3 3 1 1 2 2 2 2 1 1 1 1 2 2 5 1 1 1 1 1 2 4 5 4.7 475
2 2 2 2 3 3 1 1 2 2 2 3 1 1 1 1 2 2 1 1 1 1 2 2 5 5.6 565
2 2 2 3 4 4 1 1 2 2 3 3 1 1 2 2 2 2 1 1 1 2 2 2 6.8 685
2 2 3 3 4 5 2 2 2 3 3 4 1 1 2 2 2 3 1 1 2 2 2 2 8.2 825
2 3 3 4 5 2 2 3 3 4 4 1 1 2 2 3 3 1 1 2 2 2 3 10F 106
3 3 4 5 2 2 3 4 4 5 1 2 2 3 3 3 1 1 2 2 3 3 12 126
3 4 5 2 3 4 4 5 2 2 3 3 4 4 2 2 2 3 3 4 15 156
4 4 5 3 3 5 5 2 2 3 4 4 5 2 2 3 3 4 4 18 186
4 5 3 4 5 2 2 4 4 5 2 2 3 4 4 5 22 226
5 4 5 3 3 5 5 2 3 4 4 5 27 276
5 5 3 3 5 3 3 5 5 33 336
5 4 4 3 3 5 39 396
4 5 4 4 47 476
Number of chips required to 5 4 5 56 566
achieve the capacitance value 5 68 686
82 826
100F 107

Capacitor Assemblies - Cap-Rack Arrays
The Cap-Rack (US Patent 6,058,004) is an assembly of individual
chip capacitors, bonded with high temperature epoxy. A Cap-Rack
can be made up of a pair, to as many as eight same size chips -
0603, 0805, 1005, 1206, 1210, 1808, 1812, 1825, 2221 and 2225 -
into one single component providing extended freedom for PCB space
utilization. Footprint dimensions can also vary to further optimize
board space usage. The patented design allows the chips to behave
as individual components, not as a single large ceramic mass, and
therefore reduces harmful thermal stress during assembly. Typical
applications are in Multi-line designs, Mobile phones, Automotive,
Computers, Network Devices and Medical products.
Electrical advantages include reduction in cross talk, to
insignificant levels, by elimination of capacitance coupling between
adjacent capacitors; the ability to combine resistors and inductors
within the Cap-Rack, as well as mixing and matching capacitance
values and dielectrics.
Mechanical advantages include reduced board area; easier to
handle; reduced placement cost; reduces component stress and
decreased cycle time. Cap-Rack can also be used with traditional
pick and place equipment. T
Consult the sales office for High Reliability versions and custom L
0.010 P
designs, particularly for high voltage applications.
(0.25)
typ.
For dielectric characteristics see pages 2 to 4.
H
For dimensions of individual chips see page 20.
P and AW dimensions are dependant on the chips utilized in
the array.
Cap Arrays require drawings to specify length and width of array AW
and chip size used. Please contact the Sales Office.
MB
Dimensions - inches/mm
Size 0603 0805 1005 1206 1210 1808 1812 1825 2221 2225
Max number of Caps 6 6 6 6 6 6 8 8 8 8
Ordering information - Cap-Rack Arrays
CR 1206 N 562 K 101 N H T -4

Capacitance in Capacitance Hi-Rel No. of
Style Size Dielectric Voltage d.c. Termination Packing
picofarads (pF) tolerance Option chips
Cap-Rack Size of N = C0G/NP0 Value in Picofarads. B = 0.10pF* Two significant N = Nickel Barrier Ref: MIL- T=
individual B = X7R Two significant C = 0.25pF* figures, followed (100% tin) PRF-55681 & Tape & Reel
chips that figures, followed by D = 0.50pF* by number of P = Palladium Silver MIL-PRF-123 W = Waffle
make up number of zeros: F = 1.0%* zeros: Y = Nickel Barrier Pack
the array 562 = 5600pF G = 2.0%* 101 = 100V (90% tin/10% lead)
H = 3.0%*
J = 5%
K = 10%
M = 20%
Z = +80% -20%
P = +100% -0%
*C0G/NP0 only

Radial Leaded Capacitors - Ordering Information
Novacap ordering information - Radial Leaded - Standard and High Rel

0805 B 123 K 501 LE A R
Size Dielectric Capacitance Tolerance Voltage-VDCW Lead Styles Packing RoHS
See N = C0G/NP0 Value in F = 1%* Two significant LE, LB, LD, LR, LQ* = No suffix = Bulk R = RoHS
charts B = X7R Picofarads. G = 2%* figures, followed by Yellow conformal coated A = Ammo pack Compliant
Two significant J = 5% number of zeros: LO = without any coating 2K/pack
RN = C0G/NP0 figures, followed K = 10% 501 = 500V
RoHS 2013 200V by number of M = 20% * Product and Case size T = Tape & Reel
RB = X7R RoHS zeros: dependant 4K/Reel
2013 200V 123 = 12,000pF *C0G parts only
S = X8R
not RoHS compliant
Novacap ordering information - Radial Leaded - High Temperature

2520 E 563 K 501 LG W R
Size Dielectric Capacitance Tolerance Voltage-VDCW Lead Styles Packing RoHS
See D = 200oC Value in F = 1%* Two significant figures, LC = Encapsulated No suffix = Bulk R = RoHS
charts C0G/NP0 Picofarads. G = 2%* followed by number of LG = Black Epoxy Coated W = Waffle pack Compliant
E = 200oC Two significant J = 5% zeros: Only available
figures, followed K = 10% 501 = 500V LO = without any coating
Class II on 250V
by number of M = 20%
zeros:
563 = 56,000pF *C0G parts only
Syfer ordering information - Radial Leaded - Standard

8111M 100 0102 J C
Voltage d.c. Dielectric
Type No./ Capacitance in Capacitance
Rel Release Suffix code Suffix code
Size ref. Marking picofarads (pF) tolerance
Value codes
code
8111M 050 = 50V (C) <10pF <10pF C = C0G/NP0 Used for specific C42 denotes
8111N 063 = 63V (D) Insert a P for the D: 0.5pF (1B/CG; CG/BP) customer RoHS compliant.
8121M 100 = 100V (E) decimal point as the F: 1.0pF X = X7R requirements. A31 or A97 denote
8121N 200 = 200V (F) second character. 10pF (2R1) non-RoHS tin/lead
8121T 250 = 250V - eg. 8P20 = 8.2pF J: 5% wires.
8131M 500 = 500V (Q) K: 10% To Special Order
10pF B = 2X1 (BX) Suffix A97 for 8111 to
8131T 630 = 630V - First digit is 0. Second and M: 20%
8141M 1K0 = 1kV - 27pF R = 2C1 (BZ) 8141 & A31 for 8151,
third digits are significant 8161, 8171.
8151M 1K2 = 1.2kV - figures of capacitance G: 2%
8161M 1K5 = 1.5kV - code. Fourth digit is (C0G/NP0 only).
8165M 2K0 = 2kV - number of zeros
8171M 2K5 = 2.5kV - eg. 0101 = 100pF
3K0 = 3kV -
4K0 = 4kV -
5K0 = 5kV -
6K0 = 6kV - Note: The voltage code may be replaced with the complete voltage (e.g. 1500V = 1K5V) at Syfers
8K0 = 8kV - discretion. Marking may be over both sides of the component as necessary.
10K = 10kV -
12K = 12kV -
Standard Radial Leaded Capacitors - 50V to 5kV
RoHS compliant interconnects, small case size, Radial Leaded
capacitors available in C0G/NP0, X7R and X8R dielectrics. The
conformal coating and lead mounting style provide a rugged
configuration for optimum performance. Units exhibit high
capacitance efficiency per kV rating and find application in
commercial/industrial use up to 5kV, such as power supplies and
voltage multiplier circuits. They are offered in bulk pack or taped
form, Ref EIA-RS468, making them suitable for automatic insertion.
For ordering information see page 83.
Lead Style LE LD LR LD LQ LD LE LB T W W
H LE H LD/LQ
Size 0805 0805 1206 1206 1206 1210 1812 2225 HS
Wmax inches:
0.150 0.150 0.200 0.200 0.200 0.200 0.300 0.350 0.060 0.060
mm: (1.50) 1.000 (1.50)
3.81 3.81 5.08 5.08 5.08 5.08 7.62 8.89 Max (25.40) Max 1.000
Min (25.40)
Hmax inches:
0.150 0.150 0.150 0.150 0.150 0.200 0.250 0.350
Min
mm: 3.81 3.81 3.81 3.81 3.81 5.08 6.35 8.89 S S
WD
Tmax inches: 0.100 0.100 0.125 0.125 0.125 0.175 0.200 0.200
mm: W W
2.54 2.54 3.18 3.18 3.18 4.45 5.08 5.08
HSmax inches: 0.200 0.250 0.250 0.250 0.250 0.300 0.350 0.500 H LB H LR
mm: 5.08 6.35 6.35 6.35 6.35 7.62 8.89 12.70 HS
HS
S inches 0.02: 0.100 0.200 0.100 0.200 0.250 0.200 0.200 0.200 0.060 0.060
mm 0.51: 2.54 5.08 2.54 5.08 6.35 5.08 5.08 5.08 (1.50) (1.50)
1.000
Max 1.000 Max
(25.40)
(25.40)
WD inches 0.02: 0.020 0.020 0.020 0.020 0.020 0.020 0.025 0.025 Min
Min
mm 0.51: 0.51 0.51 0.51 0.51 0.51 0.51 0.64 0.64 S

S
Capacitance and Voltage Selection - Commercial Radial Leaded Capacitors
Size 0805 1206 1210 1812 2225
Min cap. 100 121 121 100 121 221 100 121 331 101 151 221 101 471 102
Dielectric C0G X7R X8R C0G X7R X8R C0G X7R X8R C0G X7R X8R C0G X7R X8R
50V 3.9nF 100nF 47nF 12nF 270nF 150nF 22nF 470nF 270nF 39nF 1.2F 560nF 120nF 1.8F 1.2F
100V 3.9nF 68nF 33nF 10nF 180nF 100nF 18nF 330nF 180nF 27nF 820nF 390nF 82nF 1.5F 1.0F
250V 1.5nF 27nF 18nF 3.9nF 68nF 33nF 8.2nF 120nF 82nF 22nF 390nF 150nF 47nF 820nF 560nF
500V 820pF 12nF 5.6nF 1.8nF 22nF 15nF 4.7nF 56nF 39nF 12nF 150nF 56nF 27nF 330nF 150nF
1kV 470pF 2.7nF 1.0nF 6.8nF 2.2nF 15nF 8.2nF 47nF 15nF 100nF
2kV 390pF 1.0nF 820pF 2.2nF 2.7nF 6.8nF 3.9nF 15nF
3kV 1.2nF 2.7nF 1.8nF 5.6nF
4kV 820pF 1.2nF 1.0nF 1.5nF
5kV 560pF 1.0nF
Notes: 1) Maximum capacitance values are shown above as 3 digit code: 2 significant figures followed by the no. of zeros
e.g. 183 = 18,000pF. R denotes decimal e.g. 2R7 = 2.7pF.
2) Parts in this range may be defined as dual-use under export control legislation as such may be subject to export licence restrictions.
Please refer to page 12 for more information on the dual-use regulations and contact the Sales Office for further information on specific part numbers.

Standard Radial Leaded Capacitors - 500V to 10kV
RoHS or Non RoHS Radial Leaded Capacitors available in C0G/
NP0 and X7R dielectrics with high voltage ratings from 500V.
The conformal coating and lead mounting style provide a
rugged configuration for optimum performance. Units exhibit
high capacitance efficiency per kV rating and find application in
commercial/industrial use up to 10kV, such as power supplies
and voltage multiplier circuits. They are also offered without the
conformal coating for less harsh environmental applications.
Dimensions - inches/mm STYLE LE

W T
Lead Style LE with conformal coating - LO without
Size 1515 2520 3530 4540 5550 6560 7565 H
Wmax inches: 0.250 0.400 0.500 0.600 0.700 0.800 0.900

mm: 6.35 10.20 12.70 15.20 17.80 20.30 22.80
0.125
Hmax inches: 0.250 0.350 0.450 0.550 0.650 0.750 0.850 1.200
(3.18)
mm: 6.35 8.89 11.40 14.00 16.50 19.00 21.60 (30.48)
Max
Min
Tmax inches: 0.200 0.250 0.350 0.400 0.400 0.400 0.400
mm: 5.08 6.35 8.89 10.20 10.20 10.20 10.20
S 0.025
S inches 0.02: 0.170 0.280 0.380 0.480 0.580 0.680 0.780
(0.635)
mm 0.51: 4.32 7.10 9.65 12.20 14.70 17.30 19.80
Capacitance and Voltage Selection - Standard Radial Leaded Capacitors
Size 1515 2520 3530 4540 5550 6560 7565
Min cap. 100 151 390 102 390 102 390 102 390 102 560 222 101 222
Dielectric C0G X7R C0G X7R C0G X7R C0G X7R C0G X7R C0G X7R C0G X7R
500V 8.2nF 150nF 39nF 680nF 68nF 1.0F 120nF 1.8F 180nF 2.2F 270nF 3.3F 330nF 4.7F
600V 6.8nF 120nF 22nF 390nF 39nF 680nF 82nF 1.5F 150nF 2.2F 220nF 2.7F 270nF 3.9F
800V 6.8nF 82nF 18nF 270nF 33nF 390nF 68nF 820nF 120nF 1.5F 180nF 2.2F 220nF 2.7F
1kV 5.6nF 56nF 12nF 180nF 27nF 330nF 56nF 680nF 100nF 1.0F 150nF 1.5F 180nF 2.2F
2kV 2.7nF 8.2nF 5.6nF 27nF 15nF 68nF 33nF 180nF 47nF 270nF 68nF 390nF 100nF 470nF
3kV 1.2nF 3.3nF 2.7nF 12nF 10nF 27nF 22nF 68nF 33nF 120nF 47nF 180nF 56nF 220nF
4kV 6.8nF 1.2nF 1.5nF 4.7nF 5.6nF 15nF 12nF 33nF 18nF 47nF 27nF 82nF 39nF 100nF
5kV 1.0nF 2.7nF 3.3nF 10nF 8.2nF 18nF 12nF 33nF 18nF 47nF 22nF 56nF
6kV 1.8nF 5.6nF 3.9nF 12nF 5.6nF 22nF 10nF 33nF 12nF 39nF
7kV 1.2nF 4.7nF 2.7nF 8.2nF 4.7nF 15nF 6.8nF 22nF 8.2nF 27nF
8kV 1.0nF 3.3nF 2.2nF 6.8nF 3.3nF 12nF 5.6nF 15nF 6.8nF 22nF
9kV 2.7nF 1.8nF 4.7nF 2.7nF 10nF 3.9nF 12nF 4.7nF 18nF
10kV 1.8nF 1.5nF 3.9nF 2.2nF 6.8nF 3.3nF 10nF 3.9nF 12nF
Notes: 1) Maximum capacitance values are shown above as 3 digit code: 2 significant figures followed by the no. of zeros
e.g. 183 = 18,000pF. R denotes decimal e.g. 2R7 = 2.7pF.

Standard Radial Leaded Capacitors - C0G/NP0, X7R
Knowles produces a wide range of dipped radial leaded capacitors.
These are available in rated voltages of 50V up to 6kV. Although our
catalogue range extends to 6kV, we are able to offer a capability for
specials up to 12kV. Our larger case sizes and high voltage versions
are particularly in demand, especially for mil/aero and medical power
supply applications. Please contact the Sales Office to discuss any
special requirements.
High working voltage - up to 12kVdc
Large case sizes
RoHS compliant versions
Tin-lead plated wire option to reduce tin whiskers (quote suffix

A97 for 8111 to 8141 & A31 for 8151, 8161, 8171).
8111M 8111N 8121M 8121N 8121T 8131M 8131M 8131T 8141M 8151M 8151M 8161M 8161M 8171M 8171M
T= T= T= T=
6.3mm 6.3mm 7.0mm 7.0mm
Min. cap C0G/NP0 4.7pF 4.7pF 4.7pF 4.7pF 4.7pF 4.7pF - 10pF 4.7pF 10pF - 27pF - 47pF -
values
X7R 100pF 100pF 100pF 100pF 330pF 100pF - 150pF 100pF 470pF - 1.0nF - 1.8nF -
C0G/NP0 5.6nF 5.6nF 33nF 33nF 33nF 220nF - 100nF 220nF 330nF - 680nF - 1.0F -
50/63V
X7R 220nF 220nF 1.0F 1.0F 1.0F 3.3F - 2.2F 4.7F 10F - 15F - 22F -
C0G/NP0 2.2nF 2.2nF 18nF 18nF 18nF 82nF - 47nF 82nF 270nF - 470nF - 680nF -
100V
X7R 100nF 100nF 680nF 680nF 680nF 2.7F - 1.5F 2.7F 5.6F - 10F - 15F -
200/ C0G/NP0 1.0nF 1.0nF 8.2nF 8.2nF 8.2nF 47nF 68nF 22nF 47nF 120nF 180nF 270nF 330nF 390nF 560nF
250V X7R 56nF 56nF 330nF 330nF 330nF 1.5F - 680nF 1.5F 3.3F - 5.6F - 10F -
C0G/NP0 680pF 680pF 6.8nF 6.8nF 6.8nF 33nF 47nF 15nF 33nF 82nF 120nF 180nF 270nF 270nF 470nF
500V
X7R 15nF 15nF 150nF 150nF 150nF 820nF - 330nF 820nF 1.0F - 1.8F - 3.3F -
C0G/NP0 560pF 560pF 3.9nF 3.9nF 3.9nF 22nF 39nF 10nF 22nF 68nF 100nF 120nF 180nF 220nF 390nF
630V
X7R 12nF 12nF 100nF 100nF 100nF 390nF - 180nF 470nF 680nF - 1.2F - 2.2F -
C0G/NP0 180pF 180pF 2.2nF 2.2nF 2.2nF 18nF 27nF 6.8nF 18nF 47nF 82nF 82nF 150nF 150nF 270nF
1kV
X7R 10nF 10nF 47nF 47nF 47nF 150nF - 100nF 150nF 180nF - 390nF - 1.0F -
C0G/NP0 120pF 120pF 1.5nF 1.5nF 1.5nF 12nF 22nF 4.7nF 12nF 33nF 56nF 68nF 100nF 100nF 180nF
1.2kV
X7R - - 10nF 10nF 10nF 100nF - 33nF 100nF 150nF - 220nF - 470nF -
C0G/NP0 82pF 82pF 820pF 820pF 820pF 6.8nF 12nF 2.7nF 6.8nF 22nF 39nF 39nF 68nF 68nF 120nF
1.5kV
X7R - - 6.8nF 6.8nF 6.8nF 68nF - 22nF 68nF 100nF - 150nF - 330nF -
C0G/NP0 39pF 39pF 390pF 390pF 390pF 4.7nF 6.8nF 1.5nF 4.7nF 10nF 18nF 22nF 39nF 39nF 68nF
2kV
X7R - - 4.7nF 4.7nF 4.7nF 33nF - 10nF 47nF 47nF - 82nF - 150nF -
C0G/NP0 - - 220pF 220pF 220pF 2.2nF 3.9nF 820pF 2.2nF 6.8nF 12nF 12nF 22nF 22nF 39nF
2.5kV
X7R - - - - - 12nF - 3.3nF 12nF 33nF - 68nF - 100nF -
C0G/NP0 - - 150pF 150pF 150pF 1.8nF 2.7nF 560pF 1.8nF 4.7nF 8.2nF 10nF 18nF 15nF 27nF
3kV
X7R - - - - - 8.2nF - 2.7nF 10nF 22nF - 47nF - 82nF -
C0G/NP0 - - - - - 820pF 1.5nF 270pF 820pF 1.8nF 3.3nF 4.7nF 6.8nF 8.2nF 15nF
4kV
X7R - - - - - 5.6nF - 2.2nF 5.6nF 6.8nF - 15nF - 33nF -
C0G/NP0 - - - - - 560pF 1.0nF 180pF 560pF 1.5nF 2.2nF 2.7nF 4.7nF 5.6nF 10nF
5kV
X7R - - - - - 4.7nF - 1.2nF 4.7nF 5.6nF - 10nF - 22nF -
C0G/NP0 - - - - - 390pF 680pF 120pF 390pF 1.0nF 1.5nF 1.8nF 3.3nF 3.9nF 6.8nF
6kV
X7R - - - - - 2.7nF - 1.0nF 2.7nF 4.7nF - 8.2nF - 15nF -
C0G/NP0 - - - - - - - - - 150pF - 330pF - 680pF -
8kV
X7R - - - - - - - - - 1.5nF - 4.7nF - 6.8nF -
C0G/NP0 - - - - - - - - - 100pF - 180pF - 470pF -
10kV
X7R - - - - - - - - - 1.0nF - 2.2nF - 4.7nF -
C0G/NP0 - - - - - - - - - 68pF - 120pF - 220pF -
12kV
X7R - - - - - - - - - 820pF - 1.2nF - 2.2nF -
8111M 8111N 8121M 8121N 8121T 8131M 8131M 8131T 8141M 8151M 8151M 8161M 8161M 8171M 8171M
T= T= T= T=
6.3mm 6.3mm 7.0mm 7.0mm
Notes: 1) T = Maximum thickness.


Standard Radial Leaded Capacitors - Packaging information
Dimensions - Radial Leaded capacitors
Width Height Thickness Lead Space Lead Diameter
Pattern (X) max. mm (inches) (Y) max. mm (inches) (Z) max. mm (inches) (S) mm (inches) (d) mm (inches)
8111M A 3.81 (0.15) 5.31 (0.21) 2.54 (0.10) 2.54 0.4 (0.1 0.016) 0.5 0.05 (0.02 0.002)
8111N B 3.81 (0.15) 5.31 (0.21) 2.54 (0.10) 5.08 0.4 (0.2 0.016) 0.5 0.05 (0.02 0.002)
8121M A 5.08 (0.20) 6.58 (0.26) 3.18 (0.125) 2.54 0.4 (0.1 0.016) 0.5 0.05 (0.02 0.002)
8121N B 5.08 (0.20) 6.58 (0.26) 3.18 (0.125) 5.08 0.4 (0.2 0.016) 0.5 0.05 (0.02 0.002)
8121T B 10.16 (0.40) 5.80 (0.23) 4.50 (0.18) 7.62 0.4 (0.30 0.016) 0.5 0.05 (0.02 0.002)
8131M A 7.62 (0.30) 9.12 (0.36) 3.81/6.30 (0.15/0.25) 5.08 0.4 (0.2 0.016) 0.5 0.05 (0.02 0.002)
8131T B 10.16 (0.40) 9.12 (0.36) 4.50 (0.18) 7.62 0.4 (0.30 0.016) 0.5 0.05 (0.02 0.002)
8141M A 10.16 (0.40) 11.66 (0.46) 3.81 (0.15) 5.08 0.4 (0.2 0.016) 0.5 0.05 (0.02 0.002)
8151M A 12.70 (0.50) 14.20 (0.56) 5.08/6.30 (0.20/0.25) 10.1 0.4 (0.4 0.016) 0.6 0.05 (0.025 0.002)
8161M A 18.50 (0.73) 16.50 (0.65) 6.00/7.00 (0.24/0.28) 14.5 0.5 (0.57 0.02) 0.6 0.05 (0.025 0.002)
8165M A 19.00 (0.75) 19.00 (0.75) 4.25 (0.17) 17.5 0.5 (0.67 0.02) 0.6 0.05 (0.025 0.002)
8171M A 25.00 (0.98) 20.00 (0.79) 6.00/7.00 (0.24/0.28) 21.0 0.6 (0.83 0.024) 0.6 0.05 (0.025 0.002)
Pattern A Pattern B
X Z X Z
Y Y
Seating Seating
Plane Plane
5.0 (0.2) 5.0 (0.2)
min. min.
1.5 (0.6)
max.
S d S d
Note: Pattern A may be substituted with Pattern B at Knowles discretion.
Marking information
All encapsulated capacitors are marked with: Capacitance value, Example: 1000pF 10% 50V 2X1 dielectric
tolerance, rated d.c. voltage, dielectric and, where size permits, the
Syfer S logo.
Capacitance
Logo
Dielectric code
Voltage code
Capacitance tolerance code
Note: Parts in this range may be defined as dual-use under export control legislation as such may be subject to export licence restrictions.

Radial Leaded Capacitors - Packaging information
Cropped leads
Cropped leads between 4.0 (0.157) and 30.0 (1.18) are available
to special order. Some of the preferred codes are listed below,
together with the appropriate suffix code.
Dimensions as for standard product except as specified.
Suffix code - AE3 Suffix code - AE4 Suffix code - AD7 Suffix code - AD5
All radial ranges All radial ranges All radial ranges All radial ranges
Lead length (L) Lead length (L) Lead length (L) Lead length (L)
6 1 (0.236 0.04) 4 1 (0.162 0.04) 5 1 (0.2 0.04) 10 1 (0.4 0.04)
from seating plane from seating plane from seating plane from seating plane
Snap in leads Suffix code - AD2

Various forms of snap in leads (preformed) are available to special For PCB holes 1.2mm diameter Y
order, some of the preferred suffix codes are listed below. Types 8131M
Dimensions as for standard product except as specified. Dimensions Seating plane
Y = 10 (0.294) Max L
L = Min: 2.75 (0.108)
Suffix code - AD1 Max: 3.50 (0.138)
Y
For PCB holes 0.9mm diameter
4.20.5
40.5 50.5
Types 8121N and 8131M Seating plane
6.60.5
Dimensions
L
8.8 Max
Y = 8121N 8 (0.315) Max
8131M 10 (0.394) Max
L = Min: 2.75 (0.108) 50.5
Suffix code - AD3 Y
Max: 3.50 (0.138) 60.5
6.0 +1.0 For PCB holes 1.2mm diameter Seating plane
Types 8121N L
Dimensions
Y = 8 (0.315) Max
L = Min: 2.75 (0.108) 4.20.5
Max: 3.50 (0.138) 50.5

6.60.5
7.6 Max
Bandoliered suffix codes

Dipped radial leaded with 2.54 and 5.08mm lead spacing can be For bandoliered products the minimum order quantity, pieces, is
supplied bandoliered on reels or in ammo boxes to special order. specified in the tables below, larger orders must be in multiples of
Some of the preferred suffix codes for bandoliered products are this quantity.
given below.
Dipped straight and formed leads Suffix code

Reel AMMO pack
Product code Lead style Diagram H H0 2500pcs 1000pcs 2000pcs
H 8111M Straight 2.54 crs A 191 C01 C02 C11
8111M Straight 2.54 crs A 160.5 C30 C31 C32
8111N Formed 5.08 crs B 160.5 C01 C02 C11
A
8121M Straight 2.54 crs A 191 C01 C02 C11
8121N Formed 5.08 crs B 160.5 C01 C02 C11
H0 8131M Straight 5.08 crs A 191 C01 C02 C11
Note: 8121T and 8131T available in bulk packaging only.
B
Dipped stand-off lead form

Product code Lead style Y max H0 2500pcs 1000pcs 2000pcs
Y 8111N Formed 5.08 crs 7.5 160.5 C12 C23 C22
This style has been
developed to provide
8111N Formed 5.08 crs 7.5 191 C13 C25 C24
H
a meniscus-free
8121N Formed 5.08 crs 8.5 160.5 C12 C23 C22
0 seating plane with a
stress relieving form
for auto-insertion.
8121N Formed 5.08 crs 8.5 191 C13 C25 C24

Radial Leaded Capacitors - Packaging information
For automatic insertion, the number of empty places in the tape per h P2 P
reel or fan-fold arrangement shall not exceed:
Three (3) missing components, when the component pitch is
equivalent to one sprocket hole pitch. W2
H1
One (1) missing component, when the component pitch is H
H0
equivalent to two sprocket hole pitches or more. W1 W0 L
At the beginning and end of a reel the bandolier will exhibit at least W
10 blank positions. L2
Minimum pull strength of product from tape = 5N. P1

t F P0
Each reel/carton is provided with a label showing the: Manufacturer, D0
product style, batch identification, quantity and date code. In accordance with IEC 60286 part 2.
Labelling with bar codes (code 39) is available on request.
Description Symbol 2.5mm lead space 5mm lead space Tolerance

Lead wire diameter d 0.5 (0.02) 0.5 (0.02) 0.05 (0.002)
0.6 (0.025) 0.6 (0.025)
Component pitch P 12.7 (0.5) 12.7 (0.5) 1.00 (0.04)
Feed hole pitch P0 12.7 (0.5) 12.7 (0.5) 0.30 (0.01)
Feed hole centre to lead P1 5.08 (0.2) 3.81 (0.15) 0.70 (0.03)
Feed hole centre to component P2 6.35 (0.25) 6.35 (0.25) 0.70 (0.03)
Lead spacing F 2.54 (0.10) 5.08 (0.20) +0.6 (0.02)

-0.1 (0.004)
Component alignment Dh 0 0 2.00(0.08)
Tape width W 18.0 (0.70) 18.0 (0.70) +1.00 (0.04)

-0.50 (0.02)
Hold down tape width W0 6.0 (0.23) 6.0 (0.23) 0.30 (0.01)
Hole position W1 9.0 (0.35) 9.0 (0.35) 0.50 (0.02)
Hold down tape position W2 0.50 (0.02) 0.50 (0.02) Max
Height to seating plane from tape centre (straight leads) (2) H 16 (0.63) to 20 (0.79) 16 (0.63) to 20 (0.79) As required
Height to seating plane from tape centre (formed leads) (2) H0 16 (0.63) to 20 (0.79) 16 (0.63) to 20 (0.79) As required
Height to top of component from tape centre H1 32.2 (1.26) 32.2 (1.26) Max
Feed hole diameter D0 4.0 (0.16) 4.0 (0.16) 0.20 (0.008)
Carrier tape plus adhesive tape thickness t 0.7 (0.03) 0.7 (0.03) 0.20 (0.008)
Carrier tape thickness - 0.5 (0.02) 0.5 (0.02) 0.10 (0.004)
Cut out component snipped lead length from tape centre L 11.0 (0.43) 11.0 (0.43) Max
Lead wire protusion from hold down L2 2.0 (0.08) 2.0 (0.08) Max
Bandoliered reels Bandoliered ammo packing

48
2 carton sizes (1.88)
52 max
335.1)
301.0
851.0
(13
3551.0
230
(9.05)
(2000 pcs) 24
451.0 (0.94)
115 20 dia.
(4.50)
The adhesive tape faces outwards. The dispensing direction is (1000 pcs)
(0.79)
as shown. For the protection of the components a paper inlay

is inserted between the windings of the bandolier. At the end of 45
(1.77)
the bandolier this paper inlay continues for at least a further two
rotations.

High Temp Radial Leaded Caps - Epoxy Coated
A range of Radial Leaded capacitors available in sizes 1515 to 7565
designed to operate from -55C to 200C in C0G/NP0 and Class II
dielectrics with voltage ratings of 25V to 4kV. These capacitors find
typical application in harsh environments such as Oil Exploration
and Automotive/Avionics engine compartment circuitry. The epoxy
coating ensures environmental protection and a rugged configuration
for optimum performance. They are also offered without the
conformal coating for less harsh environmental applications.
Capacitance tolerances: 1%*, 2%*, 5%, 10%, 20%
(*C0G/NP0 only)
Dimensions - inches/mm STYLE LE

W T
Lead Style LG with black epoxy coating - LO without
Size 1515 1812 2520 3530 4540 6560 7565 H
W inches: 0.250 0.300 0.370 0.470 0.570 0.770 0.870

mm: 6.35 7.62 9.40 11.90 14.50 19.60 22.10
0.060
H inches: 0.250 0.200 0.300 0.400 0.500 0.720 0.770 (1.52) 1.250
mm: 6.35 5.08 7.62 10.20 12.70 18.30 19.60 Max (31.75)
Min
T inches: 0.190 0.160 0.240 0.310 0.360 0.360 0.360
mm: 4.83 4.06 6.10 7.87 9.14 9.14 9.14
S 0.025
S inches 0.02: 0.170 0.200 0.280 0.380 0.480 0.680 0.780 (0.64)
mm 0.508: 4.32 5.08 7.10 9.65 12.20 17.30 19.80
Maximum capacitance values - 200oC C0G/NP0 (D)/Class II (E) dielectrics
Size 1515 1812 2520 3530 4540 6560 7565
Min cap. 5R0 151 220 151 390 102 390 102 390 102 560 222 101 222
Dielectric C0G Class II C0G Class II C0G Class II C0G Class II C0G Class II C0G Class II C0G Class II
25V 22nF 820nF 27nF 1.0F 56nF 2.2F 100nF 3.9F 180nF 5.6F 330nF 15F 390nF 18F
50V 18nF 680nF 22nF 650nF 56nF 1.8F 82nF 2.7F 150nF 4.7F 270nF 12F 330nF 15F
100V 10nF 270nF 10nF 270nF 33nF 1.2F 56nF 2.2F 100nF 3.3F 220nF 8.2F 270nF 12F
250V 3.9nF 82nF 6.8nF 100nF 15nF 270nF 33nF 560nF 56nF 1.2F 120nF 2.7F 150nF 3.9F
500V 2.7nF 18nF 3.3nF 22nF 5.6nF 56nF 12nF 120nF 27nF 330nF 56nF 680nF 68nF 820nF
1kV 820pF 2.7nF 1.0nF 3.3nF 1.8nF 12nF 5.6nF 27nF 15nF 68nF 33nF 150nF 39nF 220nF
2kV 180pF 560pF 220pF 680pF 390pF 2.2nF 1.5nF 6.8nF 3.3nF 18nF 8.2nF 39nF 10nF 47nF
3kV 8.2pF 220pF 100pF 220pF 180pF 820pF 560pF 2.7nF 1.5nF 6.8nF 3.3nF 15nF 3.9nF 18nF
4kV 4.7pF 100pF 220pF 330pF 1.2nF 820pF 2.7nF 1.8nF 5.6nF 2.2nF 8.2nF
Note: Maximum capacitance values are shown above as 3 digit code: 2 significant figures followed by the no. of zeros e.g. 183 = 18,000pF.
R denotes decimal e.g. 2R7 = 2.7pF.

High Temp Radial Leaded Caps - Encapsulated
A range of Radial Leaded capacitors available in sizes 1515 to 7565
designed to operate from -55C to 200C in C0G/NP0 and Class II
dielectrics. Voltage ratings of 25V to 500V. These capacitors find
typical application in very harsh environments where isolation and
protection of the device is required for optimum reliability. They are
also offered without the molded case for less harsh environmental
applications. Consult the Sales Office if your specific requirements
exceed our catalogue maximums (size, cap. value and voltage).
Capacitance tolerances: 1%*, 2%*, 5%, 10%, 20%
(*C0G/NP0 only)
W T
Lead Style LC with encapsulation - LO without
Size 1515 2520 3530 4540 5550 6560 7565 H
W inches 0.015: 0.300 0.400 0.500 0.725 0.795 0.925 1.125

mm 0.381: 7.62 10.20 12.70 18.40 20.20 23.50 28.60
H inches 0.015: 0.300 0.400 0.500 0.500 0.745 0.750 0.750 1.250
mm 0.51: 7.62 10.20 12.70 12.70 18.90 19.00 19.00 (3.48)
Min
T inches 0.015: 0.150 0.200 0.265 0.325 0.370 0.350 0.375
mm 0.51: 3.81 5.08 6.73 8.26 9.40 8.89 9.52
S 0.025
S inches 0.02: 0.170 0.280 0.380 0.480 0.580 0.680 0.780 (0.64)
mm 0.508: 4.32 7.10 9.65 12.20 14.70 17.30 19.80
Maximum capacitance values - 200oC C0G/NP0 (D)/Class II (E) dielectrics
Size 1515 2520 3530 4540 5550 6560 7565
Min cap. 3R0 221 390 102 390 102 390 102 390 102 560 222 101 222
Dielectric C0G Class II C0G Class II C0G Class II C0G Class II C0G Class II C0G Class II C0G Class II
25V 18nF 560nF 56nF 2.2F 100nF 3.9F 180nF 5.6F 220nF 10F 330nF 15F 390nF 18F
50V 15nF 390nF 56nF 1.5F 82nF 2.7F 150nF 4.7F 180nF 6.8F 270nF 12F 330nF 15F
100V 5.6nF 120nF 27nF 820nF 56nF 1.8F 100nF 3.3F 150nF 5.6F 220nF 8.2F 270nF 10F
250V 3.9nF 39nF 12nF 180nF 273 560nF 56nF 1.2F 82nF 2.2F 120nF 2.7F 150nF 3.9F
500V 1.5nF 8.2nF 5.6nF 39nF 12nF 82nF 27nF 220nF 39nF 330nF 56nF 470nF 82nF 680nF
Note: Maximum capacitance values are shown above as 3 digit code: 2 significant figures followed by the no. of zeros e.g. 183 = 18,000pF.
R denotes decimal e.g. 2R7 = 2.7pF.

Surface Mount EMI Filters - E01 & E07 feedthrough capacitors
The Syfer E01 and E07 ranges of feedthrough MLCC chip C filters
are 3 terminal chip devices designed to offer reduced inductance
compared to conventional MLCCs when used in signal line filtering.
The filtered signal passes through the chip internal electrodes and
the noise is filtered to the grounded side contacts, resulting in
reduced length noise transmission paths.
Available in C0G/NP0 and X7R dielectrics, with current ratings
of 300mA, 1A, 2A, 3A and voltage ratings of 25Vdc to 200Vdc.
Also available with FlexiCap termination which is strongly
recommended for new designs.
Commonly used in automotive applications, a range qualified to
AECQ-200 is also available.
E01 300mA, E07 1A/2A/3A C E01/E07 Recommended

solder lands
L
C
D
T B
Earth track
W E A
B1
B2
C
Dimensions Signal track

0805 1206 1806 1812 0805 1206 1806 1812
2.0 0.3 3.2 0.3 4.5 0.35 4.5 0.35
L (0.079 0.012) (0.126 0.012) (0.177 0.014) (0.177 0.014) A 0.95 (0.037) 1.20 (0.047) 1.2 (0.047) 2.65 (0.104)
1.25 0.2 1.6 0.2 1.6 0.2 3.2 0.3
W (0.049 0.008) (0.063 0.008) (0.063 0.008) (0.126 0.012)
B 0.90 (0.035) 0.90 (0.035) 1.40 (0.055) 1.40 (0.055)
1.0 0.15 1.1 0.2 1.1 0.2 2.0 0.3
T (0.039 0.006) (0.043 0.008) (0.043 0.008) (0.079 0.012)
C 0.30 (0.012) 0.60 (0.024) 0.80 (0.031) 0.80 (0.031)
0.60 0.2 0.95 0.3 1.4 0.3 1.45 0.35

B1 (0.024 0.008) (0.037 0.012) (0.055 0.012) (0.055 0.012)
D 0.40 (0.016) 0.80 (0.031) 1.40 (0.055) 1.40 (0.055)
0.3 0.15 0.5 0.25 0.5 0.25 0.75 0.25

B2 E 0.75 (0.030) 1.0 (0.039) 1.0 (0.039) 2.05 (0.080)
(0.012 0.006) (0.02 0.01) (0.02 0.01) (0.02 0.01)
Notes: 1) All dimensions mm (inches).
2) Pad widths less than chip width gives improved mechanical performance.
3) The solder stencil should place 4 discrete solder pads. The unprinted distance between ground pads is shown as dim E.
4) Insulating the earth track underneath the filters is acceptable and can help avoid displacement of filter during soldering but can result in residue entrapment under the chip.
Standard Range - E01 & E07 Feedthrough Capacitors

Type E01 E07
Chip Size 0805 1206 1806 0805 1206 1806 1812
Max Current 300mA 300mA 300mA 1A 2A 2A 3A
Rated Voltage Dielectric Minimum and maximum capacitance values
C0G/NP0 180pF-1.5nF 560pF-3.9nF 820pF-4.7nF 180pF-1.5nF 560pF-3.9nF 820pF-4.7nF -
25Vdc
X7R 470pF-100nF 5.6nF-330nF 3.9nF-560nF 820pF-100nF 10nF-330nF 22nF-560nF 560nF-1.8F
C0G/NP0 22pF-820pF 22pF-3.3nF 22pF-3.9nF 10pF-220pF 22pF-1nF 100pF-1.5nF -
50Vdc
X7R 560pF-68nF 4.7nF-220nF 3.3nF-330nF 1nF-68nF 10nF-220nF 22nF-330nF 330nF-1.5F
C0G/NP0 22pF-560pF 22pF-2.2nF 22pF-3.3nF 10pF-120pF 22pF-560pF 100pF-680pF -
100Vdc
X7R 560pF-27nF 1.8nF-100nF 3.3nF-180nF 1nF-27nF 10nF-100nF 22nF-180nF 180nF-820nF
C0G/NP0 - 560pF-1.2nF 56pF-1nF - 15pF-180pF 56pF-470pF -
200Vdc
X7R - 2.7nF-56nF 3.9nF-100nF - 12nF-56nF 22nF-100nF 100nF-270nF
Note: E07 25Vdc C0G/NP0 1206 and 1806 ranges in green, have maximum current of 1A.
AEC-Q200 Qualified Range - E01 & E07 Feedthrough Capacitors - maximum capacitance values
Type E01 E07
Chip Size 0805 1206 1806 0805 1206 1806
C0G/NP0 820pF 1nF 2.2nF 220pF 1nF 1.5nF
50V
X7R 47nF 100nF 200nF 47nF 100nF 200nF
C0G/NP0 560pF 1nF 2.2nF 120pF 560pF 680pF
100V
X7R 15nF 15nF 68nF 15nF 15nF 68nF
Note: For some lower capacitance parts, higher voltage rated parts may be supplied. Please refer to the table below.

Surface Mount EMI Filters - E01 & E07 feedthrough capacitors
Open board insertion loss performance in 50W system
Open Board Performance
Capacitance 0.1MHz 1MHz 10MHz 100MHz 1GHz Resonance Freq (MHz) approx.
10pF 0 0 0 0 7.5 2200
22pF 0 0 0 0 16 1600
33pF 0 0 0 1 22 1350
47pF 0 0 0 2 28 1150
68pF 0 0 0 3 41 900
100pF 0 0 0 5 28 800
150pF 0 0 0 8 24 700
220pF 0 0 0 12 20 600
330pF 0 0 1 15 20 500
470pF 0 0 2 18 20 425
560pF 0 0 3 20 20 350
680pF 0 0 4 22 20 300
820pF 0 0 5 24 20 260
1nF 0 0 7 27 20 220
1.5nF 0 0 9 31 20 200
2.2nF 0 0 12 34 20 170
3.3nF 0 1 14 39 20 135
4.7nF 0 2 18 46 20 110
6.8nF 0 3 21 50 20 90
10nF 0 5 24 48 20 80
15nF 0 8 27 45 20 65
22nF 0 12 31 43 20 56
33nF 1 14 34 40 20 40
47nF 2 17 38 40 20 34
68nF 4 20 41 40 20 30
100nF 6 24 45 40 20 28
150nF 8 26 48 40 20 24
220nF 10 30 52 40 20 17
330nF 13 33 55 40 20 15.5
470nF 16 36 60 40 20 14
560nF 18 39 65 40 20 12
10
-10
-20
Loss (db)
10pF - C0G
-30 22pF - C0G
47pF - C0G
-40 100pF - C0G
470pF - C0G
2.2nF - C0G
-50 2.2nF - X7R
4.7nF - X7R
-60 10nF - X7R
22nF - X7R
100nF - X7R
-70 200nF - X7R
-80
0.00 0.01 0.1 1 10 100 1000 10K 20K
Frequency (MHz)
Ordering Information - E01 & E07 feedthrough capacitors
1206 Y 100 0103 M X T E07

Chip
Termination Voltage Capacitance in picofarads (pF) Tolerance Dielectric Packaging Type
size
0805 J = Nickel Barrier (Tin) 025 = 25V First digit is 0. Second and third M = 20% A = C0G/NP0 T = 178mm E01
1206 *Y = FlexiCap 050 = 50V digits are significant figures of AEC-Q200 (7) reel E07
1806 (Tin - X7R only) 100 = 100V capacitance code. The fourth digit C = C0G/NP0 R = 330mm
1812 A = (Tin/Lead) 200 = 200V is number of zeros following (13) reel
E = X7R
Not RoHS compliant. Example: 0103 = 10000pF. AEC-Q200 B = Bulk
*H = FlexiCap
X = X7R
(Tin/Lead)
Not RoHS compliant.
Note: *FlexiCap termination only available in X7R material. Please contact our Sales Office for any special requirements.
Reeled
178mm 0805 1206 1806 1812 330mm 0805 1206 1806 1812
quantities
(7) reel 3000 2500 2500 1000 (13) reel 12000 10000 10000 4000

Surface Mount EMI Filters - E03 X2Y Integrated Passive Components
The Syfer X2Y Integrated Passive Component is a 3 terminal EMI chip
device.
When used in balanced line applications, the revolutionary design
provides simultaneous line-to-line and line-to-ground filtering, using
a single ceramic chip. In this way, differential and common mode
filtering are provided in one device.
For unbalanced applications, it provides ultra low ESL (equivalent
series inductance). Capable of replacing 2 or more conventional
devices, it is ideal for balanced and unbalanced lines, twisted pairs
and dc motors, in automotive, audio, sensor and other applications.
Available in sizes from 0805 to 1812, these filters can prove
invaluable in meeting stringent EMC demands.
Manufactured by Knowles Capacitors under licence from X2Y Attenuators LLC.
Dielectric Capacitance measurement Temperature rating Dielectric withstand voltage

X7R or C0G/NP0 At 1000hr point -55C to 125C <200V 2.5 times rated Volts for 5
Electrical configuration Typical capacitance matching Insulation resistance secs 500V 1.5 times rated Volts for
Multiple capacitance Better than 5% 100Gohms or 1000s (whichever is 5 secs Charging current limited to
(down to 1% available on request) the less) 50mA Max.
Type E03
Chip size 0805 1206 1410 1812
Rated voltage Dielectric

C0G/NP0 - - - -
16Vdc
X7R - - - -
C0G/NP0 560pF - 820pF 1.8nF - 3.3nF 6.8nF - 8.2nF 12nF - 15nF
25Vdc
X7R 56nF - 68nF - 470nF 820nF
50Vdc
100Vdc
C0G/NP0 - 22pF - 1.0nF 100pF - 3.3nF 820pF - 5.6nF
200Vdc
X7R - 820pF - 33nF 1.2nF - 120nF 2.7nF - 180nF
C0G/NP0 - - - 820pF - 3.9nF
500Vdc
X7R - - - 2.7nF - 100nF
Note: For some lower capacitance parts, higher voltage rated parts may be supplied.
AEC-Q200 range (E03) - capacitance values
Chip size 0805 1206 1410 1812

50Vdc
100Vdc
0805 1206 1410 1812
L 2.00.3 (0.080.012) 3.20.3 (0.1260.012) 3.60.3 (0.140.012) 4.50.35 (0.180.014)
L
W 1.250.2 (0.050.008) 1.600.2 (0.0630.008) 2.50.3 (0.10.012) 3.20.3 (0.1260.012)
2.0 max. 2.1 max.

T 1.00.15 (0.040.006) 1.10.2 (0.0430.008)
(0.08 max.) (0.08 max.)
T
B1 0.50.25 (0.020.01) 0.950.3 (0.0370.012) 1.200.3 (0.0470.012) 1.40.35 (0.060.014)
W B2 0.30.15 (0.0120.006) 0.50.25 (0.020.01) 0.50.25 (0.020.01) 0.750.25 (0.030.01)
B1 Notes: 1) All dimensions mm (inches).

B2 2) Pad widths less than chip width gives improved mechanical performance.
3) The solder stencil should place 4 discrete solder pads. The un-printed distance between ground pads
is shown as dim E.
4) Insulating the earth track underneath the filters is acceptable and can help avoid displacement of
filter during soldering but can result in residue entrapment under the chip.

Surface Mount EMI Filters - E03 X2Y Integrated Passive Components
Recommended solder lands
0805 1206 1410 1812
D
A 0.95 (0.037) 1.2 (0.047) 2.05 (0.08) 2.65 (0.104)
B
B 0.9 (0.035) 0.9 (0.035) 1.0 (0.040) 1.4 (0.055)
E A
C 0.3 (0.012) 0.6 (0.024) 0.7 (0.028) 0.8 (0.031)
D 0.4 (0.016) 0.8 (0.031 ) 0.9 (0.035) 1.4 (0.055)

C
E 0.75 (0.030) 1.0 (0.039) 1.85 (0.071) 2.05 (0.080)
Component Advantages Disadvantages Applications
Requires 1 per line

By-pass
Chip capacitor Industry standard High inductance
Low frequency
Capacitance matching problems
Feedthrough
3 terminal Feedthrough
Current limited Unbalanced lines
feedthrough Lower inductance
High frequency
Very low inductance By-pass

Replaces 2 (or 3) components Balanced lines
Syfer X2Y High frequency
Negates the effects of temperature,
Integrated Care must be taken to
voltage and ageing dc electric motors
Passive optimise circuit design
Component Provides both common mode and differential Unbalanced lines
mode attenuation Audio amplifiers
Can be used on balanced & unbalanced lines CANBUS
Filtering application Decoupling application

INPUT 1 A A
SIGNAL
C1 C1
C2
GROUND
C1
C1
RETURN
INPUT 2 B B
0 0
470pF
-10 -10 1nF
Insertion loss (dB)
Insertion loss (dB)
-20 -20
-30 -30
-40 47nF 27pF -40

100nF 100pF
-50 -50 47nF
220nF 470pF
-60 10nF
-60 400nF 1nF
680nF 10nF 100nF
-70 -70
0.1 1 10 100 1000 5000 1 10 100 1000 5000
Ordering Information - X2Y IPC range

1812 Y 100 0334 M X T E03
Chip Capacitance in picofarads (pF)
Termination Voltage Tolerance Dielectric Packaging Type
Size C1
0805 J = Nickel Barrier (Tin) 016 = 16V First digit is 0. Second and third M = 20% A = C0G/NP0 T = 178mm (7) Syfer X2Y
1206 *Y = FlexiCap 025 = 25V digits are significant figures of (Tighter AEC-Q200 reel Integrated
1410 (Tin - X7R only) 050 = 50V capacitance code. tolerances C = C0G/NP0 R = 330mm Passive
1812 A = (Tin/Lead) 100 = 100V The fourth digit is number of zeros may be (13) reel Component
200 = 200V following E = X7R
Not RoHS compliant. available on AEC-Q200 B = Bulk
500 = 500V Example: 0334=330nF. request).
*H = FlexiCap
Note: C1 = 2C2 X = X7R
(Tin/Lead)
Not RoHS compliant.
Note: *FlexiCap termination only available in X7R material. Please contact the sales office for any special requirements.
Reeled 0805 1206 1410 1812 0805 1206 1410 1812

quantities 178mm (7) 330mm (13)
reel 3000 2500 2000 1000 reel 12000 10000 8000 4000

Trimmers Pulse Capacitors Special Discrete Filters
Half-turn Trimmers Planar Arrays
Feedthrough EMI Filters
Single Layer Capacitors Gain Equalizers Specialty Products
Power Dividers Varistor Filters Trimmer Ca
Other products available

Hi-Rel and Specialty Products Thin Film Devices
Hi-Rel Products Trimmer Capacitors Special Filters
Opti-Cap Capacitors Hi-Cap Capacitors EMI Filters
Discoidal Capacitors
apacitors Varistor Arrays Thin Film Devices
from
www.knowlescapacitors.com
Knowles Capacitors designs, manufactures and

sells special electronic components. Our products
are used in military, space, telecom infrastructure,
medical and industrial applications where function
and reliability are crucial.
Knowles (Cazenovia)
2777 Route 20 East, Cazenovia,
NY 13035 USA
Phone: +1 315 655 8710
Fax: +1 315 655 0445
DLISales@knowles.com
Knowles (Valencia)
25111 Anza Drive, Valencia,
CA 91355 USA
Phone: +1 661 295 5920
Fax: +1 661 295 5928
NovacapSales@knowles.com
Knowles (UK) Ltd

Hethel Engineering Centre, Chapman Way,
Hethel, Norwich, Norfolk NR14 8FB
Phone: +44 1603 723300
Fax: +44 1603 723301
SyferSales@knowles.com
Knowles (Cazenovia)
2777 Route 20 East, Cazenovia,
NY 13035 USA
10123/16/MLC
10123/16/MLC/v2 Phone: +1 315 655 8710
Fax: +1 315 655 0445
Copyright Knowles Capacitors, 2016 - design: creations@panpublicity.co.uk VoltronicsSales@knowles.com

Knowles MLC Catalogue 2016

Uploaded by

Copyright:

Available Formats

Knowles MLC Catalogue 2016

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Knowles MLC Catalogue 2016

Uploaded by

Copyright:

Available Formats

MLC

At Knowles Capacitors we make Single Layer, Multilayer,

Our business was formed by combining Dielectric

Our expertise is the design and manufacture of components

We aim to be a leader in every market we serve, to

l Understanding our customers real needs and providing

l Providing better products and services than competitors.

l Investing in product development, manufacturing

l Insisting on the highest ethical standards and a business

Products in this catalogue form the basis of our ranges for

Capacitors Modem/Tip and Ring

Filters AC Noise Removal

SM and High Voltage Circuitry

Leaded High Speed Decoupling

High Q, C0G/NP0 & Porcelain Range

Balanced Line Capacitors

PCB Space Saving

115Vac 400Hz range Pages 57, 72,

MLCC Ordering Chip Ordering Information..................................................................DLI..............................21

MLC Quick Reference Guide.......................................................................Novacap-Syfer.......24-25

MLC Radial Radial Leaded - Ordering Information..................................................Novacap-Syfer........... 83

SM EMI Filters Feedthrough Filters - E01 & E07..........................................................Syfer......................92-93

C0G/NP0 P90 Class I

Dielectric IECQ-CECC - - 1B/CG - - -

@25C = 100G or 1000F

Cr <4.7pF 0.05pF, 0.10pF, 0.25pF, 0.5pF

<200V 2.5 times 2.5 times

Chip 55/125/56 55/125/56 55/125/56 - -

Approvals Syfer Chip - - - QC-32100 - -

- 2C1 2R1 2X1 - - - IECQ-CECC Dielectric

0.025 >25V <0.025 Tangent of loss

100G or 1000s Time constant Insulation

2.5 times 2.5 times <200V Dielectric

55/85/56 55/125/56 55/150/56 - Chip

- QC-32100 - - - QC-32100 - Syfer Chip Approvals

* Refer to page 61 for details of Dissipation Factor.

-0.5 Frequency (MHz)

-0.75 Stable X7R dielectric Stable X7R dielectric

0.001 0.01 0.1 1 10 100 1000 10000

Stable X7R dielectric - 10nFStable X7R dielectric 10nF

10 will lie within the shown limits Frequency (MHz)

Stable X7R dielectric Stable X7R dielectric

DLI Cap Typical ESR Series Resonance

C17CF 10 0.065 0.098 0.136 3100

C22CF 100 0.047 0.079 0.119 1000

C40CF 100 0.044 0.038 0.045 680

DLI Cap Typical ESR Series Resonance

C40AH 100 0.018 0.026 0.052 680

Ag Termination, Cu Barrier Layer,

Copper Barrier 90/10% tin/lead

FlexiCap with Copper Barrier

FlexiCap with Nickel Barrier

FlexiCap with Nickel Barrier

Heavy SnPb Plated Solder

Copper Barrier 100% tin

Barrier, Sn Plated Solder

200-u-in 90/10 Sn Plate

Recommended for Solder

NP0 Porcelain - Hi Q DLI - CF

Knowles has the solution - FlexiCap