Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 125 views

    Ensamblado Proy

    Uploaded by

    JoseIbañez
    This document provides specifications for a photomicrosensor. It is a screw-mounting model with a 0.5mm sensing aperture and 5mm groove. It comes in two models, one dark ON and one light ON. It has a maximum current consumption of 30mA, minimum output voltages of 0.3V and 0.9 times the power supply voltage, and minimum response frequency of 3kHz. Connectors and dimensions are provided.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Ensamblado Proy

    Uploaded by

    JoseIbañez
    125 views2 pages
    This document provides specifications for a photomicrosensor. It is a screw-mounting model with a 0.5mm sensing aperture and 5mm groove. It comes in two models, one dark ON and one light ON. It has a maximum current consumption of 30mA, minimum output voltages of 0.3V and 0.9 times the power supply voltage, and minimum response frequency of 3kHz. Connectors and dimensions are provided.

    Original Description:

    ensamblaje

    Original Title

    ensamblado proy

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides specifications for a photomicrosensor. It is a screw-mounting model with a 0.5mm sensing aperture and 5mm groove. It comes in two models, one dark ON and one light ON. It has a maximum current consumption of 30mA, minimum output voltages of 0.3V and 0.9 times the power supply voltage, and minimum response frequency of 3kHz. Connectors and dimensions are provided.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    125 views2 pages

    Ensamblado Proy

    Uploaded by

    JoseIbañez
    This document provides specifications for a photomicrosensor. It is a screw-mounting model with a 0.5mm sensing aperture and 5mm groove. It comes in two models, one dark ON and one light ON. It has a maximum current consumption of 30mA, minimum output voltages of 0.3V and 0.9 times the power supply voltage, and minimum response frequency of 3kHz. Connectors and dimensions are provided.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    Photomicrosensor (Transmissive)

    EE-SX3009-P1/-SX4009-P1
    Be sure to read Precautions on page 24.

    Dimensions Features
    Note: All units are in millimeters unless otherwise indicated. Screw-mounting model.
    High resolution with a 0.5-mm-wide sensing aperture.
    34 171825-3 With a 5-mm-wide groove.
    230.2 (Tyco Electronics AMP)
    Photo IC output signals directly connect with C-MOS and TTL.
    Connects to Tyco Electronics AMPs EI-series connectors.
    Dark ON model (EE-SX3009-P1)
    Light ON model (EE-SX4009-P1)

    30.1 dia, depth: 2


    4.20.2 dia. hole
    Absolute Maximum Ratings (Ta = 25C)
    Two, R1 0.5 (Aperture width)
    Optical Item Symbol Rated value
    axis
    Power supply voltage VCC 10 V
    10.5
    Output voltage VOUT 28 V
    Output current IOUT 16 mA
    7.5 Permissible output dissipation POUT 250 mW
    (see note)
    0
    Ambient temper- Operating Topr 25C to 75C
    4 0.1 dia. ature Storage Tstg 40C to 85C
    Soldering temperature Tsol ---
    Internal Circuit
    V
    Note: Refer to the temperature rating chart if the ambient tempera-
    ture exceeds 25C.
    O

    G Unless otherwise specified, the


    tolerances are as shown below.
    Terminal No. Name Dimensions Tolerance
    V Power supply 4 mm max. 0.2
    (Vcc)
    4 < mm 16 0.3
    O Output (OUT)
    G Ground (GND) 16 < mm 63 0.5

    Recommended Mating Connectors:


    Tyco Electronics AMP 171822-3 (crimp connector)
    172142-3 (crimp connector)
    OMRON EE-1005 (with harness)

    Electrical and Optical Characteristics (Ta = 25C, Vcc = 5 V 10%)


    Item Symbol Value Condition
    Current consumption ICC 30 mA max. With and without incident
    Low-level output voltage VOL 0.3 V max. IOUT = 16 mA
    Without incident (EE-SX3009-P1)
    With incident (EE-SX4009-P1)
    High-level output voltage VOH (VCC x 0.9) V min. VOUT = VCC
    With incident (EE-SX3009-P1)
    Without incident (EE-SX4009-P1), RL = 47 k
    Response frequency f 3 kHz min. VOUT = VCC, RL = 47 k (see note)

    Note: The value of the response frequency is measured by


    rotating the disk as shown below.
    Disk

    2.1 mm

    0.5 mm
    0.5 mm
    t = 0.2 mm

    60 EE-SX3009-P1/-SX4009-P1 Photomicrosensor (Transmissive)


    Engineering Data
    Note: The values in the parentheses apply to the EE-SX4009-P1.

    Output Allowable Dissipation vs. Sensing Position Characteristics


    Ambient Temperature Characteristics (Typical)
    Output allowable dissipation Pc (mW)

    d1 = 00.3 mm VCC = 5 V, Ta = 25C


    RL = 47 k

    ON
    (OFF)

    Output transistor
    Center of
    optical axis

    Light interrupting plate


    OFF
    (ON)

    Ambient temperature Ta (C) Distance d (mm)


    EE-1005 Connector
    1,00020

    (1) (2)
    (3)

    No. Name Model Quantity Maker Wiring


    1 Receptacle housing 171822-3 1 Tyco Elec-
    Connector Lead wire Output when connected
    tronics circuit no. color to EE-SX4009-P1/EE-SX3009-P1
    AMP
    1 Red VCC
    2 Receptacle contact 170262-1 3 Tyco Elec-
    tronics 2 Orange GND
    AMP 3 Yellow OUT
    3 Lead wire UL1007 AWG24 3 ---

    EE-SX3009-P1/-SX4009-P1 Photomicrosensor (Transmissive) 61

    You might also like