326D2 L

Hydraulic Excavator

Engine Weights
Engine Model Cat C7.1 ACERT Minimum Operating Weight 25 765 kg 56,800 lb
Engine Power (ISO 14396) 147 kW 197 hp Maximum Operating Weight 26 075 kg 57,490 lb
Net Power (SAE J1349/ISO 9249) 144 kW 193 hp
Reach More,
Dig More
The Cat 326D2 L is designed
to help you get more
work done in less time
with low operating costs.
Outstanding reliability,
unprecedented operator
comfort and ease of service
help to maximize your
return on investment.
326D2 L with a powerful
CatC7.1 ACERT engine meets
China NonroadIII emission
standards combined with a
new highly efficient hydraulic
system, which delivers
excellent performance with
lower fuel consumption.

Contents
Key Features ........................................................4

Engine ...................................................................6

Operator Station ..................................................7

Hydraulics ............................................................8

Undercarriage and Structures .........................9

Front Linkage .....................................................10

Service and Maintenance ...............................11

Work Tools..........................................................12

Integrated Technologies ..................................14

Complete Customer Support ...........................16

Specifications ....................................................17

Standard Equipment .........................................26

Optional Equipment...........................................27

2
The 326D2 L incorporates innovations to improve your job site efficiency through low owning and operating costs,
excellent performance, high versatility and efficient fuel efficiency.

3
Key Features
World class design combines excellent performance
with low fuel consumption and top reliability

Performance/Efficiency
High fuel efficiency
Improves fuel efficiency by managing pump and isochronous
engine speed control
Meets China Nonroad III emission standards
Electrical Fuel Priming Pump (EPP) replaces hand
primingpump

4
Ease of Operation Reduced Costs
Ergonomically designed cab with easy to operatecontrols 500 hour service intervals
Multiple seat and joystick adjustment options enhance comfort Two different power modes are available, High Horse Power
Excellent work site visibility from cab enhancesproductivity (HHP) and ECO Mode; ECO Mode reduces fuel consumption up
Optimized low effort joystick controls reduce operator fatigue to 9% with no loss in digging or lifting forces
Monitor with larger viewing screen, higher resolution and
Technology
42language options available
Integrated Cat technology solutions increase production
Reliability/Serviceability andminimize operating costs
Strong and durable carbody designed to work inthe toughest Product Link reports key information from themachine to
operating conditions anylocation
All electrical wires are colored, numbered and protected with
thick braiding for ease of identification and long life
Modified X-frame structure provides long life anddurability
Heavy duty booms and sticks are standard
Grease and Lubricated Tracks (GLT) provide longerlife

5
Engine
Power up with strong reliability, high efficiency

Reliable Cat C7.1 ACERT Engine

The Cat C7.1 ACERT engine has been designed
to meetChina Nonroad III emission standards.
The C7.1 ACERT engine incorporates proven,
robust components and precision manufacturing
you can count on for reliable and efficient
operation. This proven engine boasts improved
reliability as its less sensitive to low quality fuel
and also delivers reduced fuel consumption.

Automatic Engine Speed Control

Automatic engine speed control is activated
during no-load or light-load conditionswhich
reduces engine speed minimizing fuel
consumption.

Air Cleaner
The radially sealed air filter features a double-
layered filter core for more efficient filtration
and is located in a compartment behind the cab.

A warning is displayed on the monitor when

dust accumulates above a preset level.

Filtration System
The C7.1 ACERT engine features an improved
filtration system to ensure good reliability tofuel
injection system components. Intervals have
been extended and the number of filters has
been increased to three. The primary filter and
the secondary twin filters improve filtration
efficiency and machine robustness.

6
 Operator Station
Comfort and convenience to keep you
productiveall day long

Monitor Seat Climate Control

The new monitor on the 326D2 L features The mechanical or air suspension seats The 326D2 L offers positive filtered
a 40 percent larger screen with four times provide a variety of adjustments to ventilation with a pressurized cab.
increased resolution display. accommodate awide range of operators. Freshair or recirculated air can be
All seats include a reclining back, upper selected which makes working in the
The LCD monitor is equipped with a
and lower seat slide adjustments, and heat and cold much more pleasant.
warning lamp and buzzer for critical
height and tiltadjustments.
engine oil pressure, coolant temperature
and oil temperature. Programmable in up Cab Structure and Mounts
to 42 languages to meet todays diverse Controls The cab shell is attached to the frame
workforce, the monitor clearly displays Operators can adjust the right and left with viscous rubber cab mounts
critical information needed to operate joysticks for individual preferences, helping whichdampen vibrations and sound
efficiently and effectively. them become more comfortable, more levels while enhancing operator
productive, and more alert. Low-effort, comfort.Thicksteel tubing along the
Filters and fluid change intervals are pilot-operated joystick controls are designed bottom perimeter of the cab improves
available in the main menu which also to match your natural wrist and arm position resistance to fatigue andvibration.
projects the image from the optional for maximum comfort and minimum fatigue.
rearview camera, further enhancing
yourjob site safety and productivity.

7
Hydraulics
Precise power and control to move more material

Hydraulic System
Hydraulic system pressure from the two-hydraulic pump system delivers
terrific digging performance andproductivity.

Pilot System
An independent pilot pump enables smooth, precise control for the front
linkage, swing, andtraveloperations.

Component Layout
The hydraulic system and component locations have been designed to provide
a high level of system efficiency. The main pumps, control valves, and hydraulic
tank are located close together to allow for shorter tubes and lines between
components, reducing friction loss andpressure drops.

Auxiliary Hydraulic Valve

Control circuits are available as attachments to improve versatility. Theyallow
operation of high- and medium-pressure tools such as shears, grapples, hammers,
pulverizers, multi-processors, and vibratory plate compactors.

Boom and Stick RegenerationCircuit

Boom and stick regeneration circuits save energy during boom-down and stick-in
operation to increase efficiency and reduce cycle times and pressure loss for
higher productivity, lower operating costs, and increased fuel efficiency.

8
 Undercarriage and Structures
Built to work in your tough, heavy-duty applications

Robotic Welding Rollers and Idlers Tracks

Up to 95% of the structural welds on a Sealed and lubricated track rollers, The 326D2 L track links are assembled
Cat Excavator are completed by robots. carrier rollers, and idlers provide excellent and sealed with grease to decrease
Robotic welds achieve over three times service life to keep the machine in the internal bushing wear, reduce travel
the penetration of manual welds. fieldlonger. noiseand extend service life lowering
operating costs.
Carbody Design and Track Long Undercarriage
RollerFrames The long undercarriage (L) maximizes Counterweights
X-shaped, box-section carbody provides stability and lift capacity. This long, wide The 4.8 mt (5.2 t) standard weight makes
excellent resistance to torsional bending. and sturdy undercarriage offers avery abetterchoice for heavy lifting with
Robot-welded track roller frames are press- stable work platform. longundercarriage. Counterweights
formed, pentagonal units which deliver arebolted directly to the main frame
exceptional strength and service life. forextrarigidity.

9
Front Linkage
Options to take on your far-reaching or up-close tasks

Standard Reach Boom and Heavy-Duty Reach

BoomFront Linkage
The 5.9 m (19'4") heavy-duty (HD) reach boom is reinforced
to be used in the severest applications for maximum digging
capability. The boom is made of high-tensile-strength steel
using a large box-section design with interior baffle plates
andan additional bottom guard forlong life and durability.

A 2.9 m (9'6") HD stick with CB1 linkage is available to meet

all your application requirements.

10
 Service and Maintenance
Designed to make your maintenance quick and easy

Ground-Level Service
The design and layout of the
326D2 L wasmade with theservice
technician in mind. Mostservice
locations are easily accessible at
ground level to allow service and
maintenance to get completed
quickly and efficiently.

Air Filter Compartment Radiator Compartment Fan Guard

The air filter features a double-element The left rear service door allows easy The engine radiator fan is completely
construction for superior cleaning access to the engine radiator, oil cooler, enclosed by fine wire mesh, reducing
efficiency. When the air cleaner plugs, air-to-air-aftercooler, water separator, therisk of an accident.
awarning is displayed on the monitor second and third fuel filters, and fuel
screen inside the cab. cooler. A reserve tank and drain cock Anti-Skid Plate
are attached to the radiator for simplified Anti-skid plate covers top of storage box
Pump Compartment maintenance. and upper structure to prevent slipping
A service door on the right side of during maintenance.
theupper structure allowsground-level Greasing Points
access to the pump, pilot filter, andwater A concentrated remote greasing block Diagnostics and Monitoring
separator with primary fuel filter. on the boom delivers grease to hard-to The 326D2 L is equipped with SOSSM
reach locations on the front. sampling ports and hydraulic test ports
for the hydraulic system, engine oil, and
for coolant.

11
Work Tools
Do more jobs with one machine

Each Cat work tool attachment is designed to optimize the versatility and performance of
your machine. An extensive range of buckets, compactors, grapples, multi-processors,
rippers, crushers, pulverizers, hammers, and shears are available for your 326D2 L.
Contact your local Cat dealer for more information onthe attachments available in
yourregion.

Buckets
Cat buckets and Cat Ground Engaging Tools (GET) are designed and matched tothe
machine toensure optimal performance and fuel efficiency.
2
1 General Duty Buckets (GD)
These buckets are designed for digging in low-impact, moderately abrasive materials
such asdirt, loam, gravel, andclay.

2 Heavy Duty Buckets (HD)

HD buckets are a good starting point when application conditions vary, especiallywhen
conditions include mixed dirt, clay, sand, andgravel.

3 Severe Duty Buckets (SD)

These buckets are best suited to highly abrasive applications such as shot rock,
3
sandstone, andgranite.

12
Couplers Shear
Quick couplers allow one person to Cat shears are designed for Cat machines
change work tools in seconds for maximum taking full advantage of the hydraulic flows
performance and flexibility on a job site. and pressures to enhance productivity
Onemachine can move rapidly from task without compromising safety or causing
totask, and a fleet ofsimilarly equipped premature wear ofthe shear and carrier.
machines can share a common work
toolinventory. Pulverizer
The excavator mounted mechanical pulverizer
E Series Hammers is a cost-effective tool for recycling demolished
E Series hammers bring together customer concrete debris. Thebucket cylinder on the
expectations of performance, quality, excavator powers the mechanical pulverizer.
andserviceability along with Caterpillar Thiseliminates the need for a dedicated
manufacturing andlogistics experience. cylinder and associated hydraulics and
additional installation cost.
E Series hammers are quiet, and
noisesuppression is valuable in urban
andrestricted work areas. Vibratory Plate Compactor
Compactors enhance the versatility of your
excavator and makes compacting faster, more
Grapples
efficient, and cost-effective. Cat compactors
Cat grapples replace the bucket on
are the superior choice for any job sites
Catexcavators, converting themto the ideal
compaction tasks.
machine for handling loose material, sorting
trash, and demolition site cleanup. Anarray
of styles and sizes are available tomatch Crusher
excavators to the task at hand. The hydraulic concrete crusher has taken
modern demolition technology astep further.
It is well suited for concrete demolition in
Multi-Processors
residential areas. Thehydraulic concrete
Multi-processors do the work of many types
crusher combines several concrete demolition
of demolition tools by use of interchangeable
operations inone piece of equipment:
jaw sets. Changing jaws allows a single unit
breaking out concrete from fixed structures
to crush, pulverize, and perform a variety
of specialized cutting tasks such as cutting pulverizing concrete
steel rebar and tanks. cutting reinforcement rods and
smallsteelprofiles

13
Integrated Technologies
Monitor, manage, and enhance job site operations

Cat Connect makes smart use of technology and services to Cat Connect technologies offer improvements in these keyareas:
improve your job site efficiency. Using the data from technology-
equipped machines, youll get more information and insight
Equipment Management increase uptime and
into your equipment and operations than ever before.
reduce operating costs.

Productivity monitor production and manage

jobsiteefficiency.

Safety enhance job site awareness to keep your

people and equipment safe.

14
Cat Connect LINK Technologies
LINK technologies wirelessly connect you to your equipment giving
you access toessential information you need to know to run your
business. Link data can give you valuable insight into how your
machine or fleet is performing so you can make timely, fact-based
decisions that can boost job site efficiency and productivity.

Product Link/VisionLink
Product Link is deeply integrated into your machine, helping to
take the guesswork out of equipment management. Easy access to
timely information like machine location, hours, fuel usage, idle time
and event codes via the online VisionLink user interface can help
you effectively manage your fleet and lower operating costs.

15
Complete Customer Support
Unmatched support makes the difference

Product Support Purchase Operation

You can maximize your machines uptime You can ensure lower owning and operating You can boost your profits by improving
with the Cat worldwide dealer network. costs by utilizing unique Cat dealer services your operators techniques. Your Cat dealer
You can also decrease your repair and financing options. has videos, literature, and other ideasto
costs by utilizing Cat remanufactured help increase productivity. Caterpillar also
components while contributing to Customer Support Agreements offers simulators and certified operator
sustainable development. Cat dealers offer a variety of customer training to help maximize the return on
support agreements and work with you your investment.
Machine Selection to develop a plan to meet your specific
What are the job requirements and needs. Theseplans can cover the entire Replacement
machine attachments? What production machine, including attachments, to help Repair, rebuild, or replace? Your Cat dealer
do you need? Your Cat dealer can provide protect your investment. can help you evaluate the cost involved
recommendations to help you make the so you can make the best choice for
right machine configuration. yourbusiness.

16
 326D2 L Hydraulic Excavator Specifications

Engine Drive
Engine Model Cat C7.1 ACERT Travel Speed
Type Direct Injection High Load 5.8 km/h 3.6 mph
Engine Power (ISO 14396) 147 kW 197 hp Low Load 5.4 km/h 3.4 mph
Net Power (SAE J1349/ISO 9249) 144 kW 193 hp Drawbar Pull 227 kN 51,032 lbf
Displacement 7.01 L 428 in3
Bore 105 mm 4.13 in Service Refill Capacities
Stroke 135 mm 5.31 in Fuel Tank Capacity 520 L 137.4 gal
Rated Speed (engine) 1,800 rpm Cooling System 31 L 8.2 gal
Hi-Idle Speed 1,700 rpm Engine Oil 22 L 5.8 gal
Low-Idle Speed 950 rpm Swing Drive 10 L 2.6 gal
Maximum Torque (torque peak) 900 Nm 663.8 lbf-ft Final Drive (each) 6L 1.6 gal
@ 1,400 rpm Hydraulic System (including tank) 285 L 75.3 gal
Maximum Altitude (without derate) 3000 m 9,842 ft Hydraulic Tank 257 L 67.9 gal
Maximum Altitude (with derate) 5000 m 16,404 ft
All engine horsepower (hp) are metric including front page. Hydraulic System
The C7.1 ACERT engine meets China Nonroad III emission
standards. Main System Maximum Flow 247 2 65.2 2
Net power advertised is the power available at the flywheel when attravel H/L (1,800 rpm) L/min gal/min
the engine is equipped with fan, air cleaner, muffler, and alternator. (494total) (130.4total)
Full engine net power up to 3000 m (9,842 ft) altitude Main System Maximum Flow 233 2 61.6 2
(enginederating required above 3000 m [9,842 ft]). attravel L/L (1,700 rpm) L/min gal/min
(466total) (123.2total)
Weights Main System Maximum Flow (each) 233 2 61.6 2
Minimum Operating Weight* 25 765 kg 56,800 lb at operation (1,700 rpm) L/min gal/min
(466total) (123.2total)
Maximum Operating Weight** 26 075 kg 57,490 lb
Swing System Maximum Flow 233 L/min 61.6 gal/min
**Based on: 600 mm (24") TG Track + HD Reach Boom +
Maximum Pressure Equipment 35 MPa 5,076.4 psi
R2.95(9'8'') HD Stick +1250mm (4'1")/1.33 m3 (1.74 yd3) Bucket
**Based on: 600 mm (24") DG Track + HD Reach Boom + Maximum Pressure Travel 35 MPa 5,076.4 psi
2.95m(9'8'') HD Stick + 1250mm (4'1")/1.33 m3 (1.74yd3)Bucket Maximum Pressure Swing 24.5 MPa 3,555.9 psi
Pilot System Maximum Flow 23.4 L/min 6.2 gal/min
Swing Mechanism Pilot System Maximum Pressure 3920 kPa 568.6 psi
Swing Speed 9.6 rpm Boom Cylinder Bore 135 mm 5.3 in
Swing Torque 73.4 kNm 54,137 lbf-ft Boom Cylinder Stroke 1305 mm 51.4 in
Stick Cylinder Bore 140 mm 5.5 in
Stick Cylinder Stroke 1660 mm 65.4 in
CB1 Bucket Cylinder Bore 130 mm 5.1 in
CB1 Bucket Cylinder Stroke 1156 mm 45.5 in
DB Bucket Cylinder Bore 150 mm 5.9 in
DB Bucket Cylinder Stroke 1151 mm 45.3 in

17
326D2 L Hydraulic Excavator Specifications

Dimensions
All dimensions are approximate.

2
3

1 9

10

6
7 4
8 5

HD Reach Boom
5.9 m (19'4")
HD Stick R2.95 CB1 (9'8")
1 Shipping Height* 3170 mm (10'5")
2 Shipping Length 10 050 mm (33'0")
3 Tail Swing Radius 3000 mm (9'10")
4 Length to Center of Rollers
Long Undercarriage 3830 mm (12'7")
5 Track Length
Long Undercarriage 4630 mm (15'2")
6 Ground Clearance** 440 mm (17")
7 Track Gauge
Long Undercarriage 2590 mm (8'6")
8 Transport Width
Long Undercarriage
600 mm (24") Shoes 3190 mm (10'6")
9 Cab Height* 2980 mm (9'9")
10 Counterweight Clearance** 1060 mm (3'6")
Bucket Type SD
Bucket Capacity 1.33 m3 (1.74 yd3)
Bucket Tip Radius 1690 mm (5'7")

**Including shoe lug height.

**Without shoe lug height.

18
 326D2 L Hydraulic Excavator Specifications

Working Ranges
All dimensions are approximate.

Feet Meters
11
35
10
30 9

8
25
7
20 6

5 3
15
4
4
10 3

2
5 5
1

0 0
2
1
5
2
7
10 3
1 6 HD 2.95 m (9'8'')
4
15
5

20 6

7
25
8
12 11 10 9 8 7 6 5 4 3 2 1 0 1 Meters

35 30 25 20 15 10 5 0 Feet

HD Reach Boom
5.9 m (19'4'')
Stick Type HD 2.95 m (9'8'')
Bucket 1.33 m3 (1.74 yd3)
1 Maximum Digging Depth 6850 mm (22'6'')
2 Maximum Reach at Ground Level 10 150 mm (33'4")
3 Maximum Cutting Height 9700 mm (31'10'')
4 Maximum Loading Height 6590 mm (21'7'')
5 Minimum Loading Height 2360 mm (7'9'')
6 Maximum Depth Cut for 2440 mm (8'1") LevelBottom 6680 mm (21'11'')
7 Maximum Vertical Wall Digging Depth 5410 mm (17'9'')
Bucket Type SD
Bucket Capacity 1.33 m3 (1.74 yd3)
Bucket Tip Radius 1690 mm (5'7")

19
326D2 L Hydraulic Excavator Specifications

Operating Weight and Ground Pressure

Boom Reach (HD)

Stick R2.95 HD
Bucket Linkage CB
Bucket Capacity 1.33 m3 (1.74yd3)
Bucket Width 1250 mm (49in)
Total Weight (600 TG) 25 043 kg (55,095 lb)
Total Weight (790TG-LC) 26 330 kg (57,926 lb)
Ground Pressure
Long Undercarriage
600 mm (24") TG (LC) 51.1 kPa (7.4psi)
600 mm (24") DG (LC) 51.7 kPa (7.5psi)

The ground pressure information is based on operating weights shown below.

ISO 6016 configuration: machine (upper and lower structure), front structure, 100% full fuel tank, fluids at normal level (i.e.: oils/water/lubricants),

bucket(currently=WWmajorbucket) without fill materials, 75 kg (165 lb) operator.

Notes: No optional attachments are included, the bucket is empty.

20
 326D2 L Hydraulic Excavator Specifications

Major Component Weights

Base Machine Includes: Boom Cylinders, Pins, Fluids 6950 kg (15,320 lb)
Full Fuel Tank 430 kg (950 lb)
Counterweight (for use with Reach) 4750 kg (10,470 lb)
Boom (includes lines, pins, and stick cylinder)
Reach Boom HD 5.9 m (19'4'') 2190 kg (4,830 lb)
Stick (includes lines, stick pins, bucket pins, bucket cylinder, and bucket linkage)
R2.95CB1 HD (9'8'') 1310 kg (2,890 lb)
Undercarriage
Long Undercarriage 5740 kg (12,650 lb)
Tracks (Long Undercarriage)
600 mm (24") TG shoe 2920 kg (6,440 lb)
600 mm (24") DG shoe 3230 kg (7,120 lb)

Bucket and Stick Forces

HD Reach Boom
5.9 m (19'4")
Stick Type R2.95 HD (9'8'')
Bucket 1.33 m3 (1.74 yd3)
Cutting Edge
Bucket Digging Force (ISO) 166 kN (37,231 lbf)
Stick Digging Force (ISO) 120 kN (27,066 lbf)
Bucket Tip
Bucket Digging Force (SAE) 143 kN (32,185 lbf)
Stick Digging Force (SAE) 116 kN (26,099 lbf)

21
326D2 L Hydraulic Excavator Specifications

326D2 HD Reach Boom Lift Capacities Counterweight: 4.8 mt (5.2 t) Without Bucket

2.95 m (9'8") 5.9 m (19'4") 600 mm (24") TG 3450 mm (11'4")

R2.95CB1

HD

4250 mm (13'11")
2390 mm (7'10")

3.0 m/10.0 ft 4.5 m/15.0 ft 6.0 m/20.0 ft 7.5 m/25.0 ft

m
ft

7.5 m kg *6450 6300 *5350 *5350 6.43

25.0 ft lb *13,350 *13,350 *11,900 *11,900 21.1
6.0 m kg *6500 6250 *5150 4300 *5100 4300 7.51
20.0 ft lb *14,200 13,450 *11,250 9,550 24.6
4.5 m kg *8500 *8500 *7250 6050 6050 4250 *5100 3650 8.18
15.0 ft lb *18,300 *18,300 *15,700 12,950 12,950 9,100 *11,200 8,100 26.8
3.0 m kg *10 850 8700 8300 5700 5900 4100 4800 3350 8.54
10.0 ft lb *23,350 18,750 17,850 12,300 12,650 8,750 10,550 7,350 28.0
1.5 m kg 12 400 8050 7950 5400 5700 3950 4650 3200 8.61
5.0 ft lb 26,700 17,350 17,100 11,600 12,250 8,450 10,200 7,050 28.2
0m kg 12 050 7750 7700 5200 5600 3800 4750 3250 8.42
0 ft lb 25,850 16,600 16,600 11,150 12,000 8,200 10,400 7,150 27.6
1.5 m kg *10 400 *10 400 11 950 7650 7600 5100 5550 3750 5100 3500 7.94
5.0 ft lb *23,650 *23,650 25,600 16,400 16,350 10,950 11,900 8,100 11,300 7,700 26.0
3.0 m kg *17 050 15 050 12 050 7700 7650 5100 6000 4100 7.11
10.0 ft lb *38,650 32,250 25,800 16,600 16,450 11,000 13,350 9,050 23.3
4.5 m kg *14 200 *14 200 *10 400 7950 *7750 5600 5.78
15.0 ft lb *30,400 *30,400 *22,250 17,150 *17,050 12,600 19.0

ISO 10567

*Indicates that the load is limited by hydraulic lifting capacity rather than tipping load. The above loads are in compliance with hydraulic excavator lift capacity
standard ISO 10567:2007. They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. Weight of all lifting accessories must be deducted from the
above lifting capacities. Lifting capacities are based on the machine standing on a firm, uniform supporting surface. The use of a work tool attachment point to
handle/lift objects, could affect the machine lift performance.
Lift capacity stays with 5% for all available track shoes.
Always refer to the appropriate Operation and Maintenance Manual for specific product information.

22
 326D2 L Hydraulic Excavator Specifications

326D2 L HD Reach Boom Lift Capacities Counterweight: 4.8 mt (5.2 t) Without Bucket

2.95 m (9'8") 5.9 m (19'4") 600 mm (24") TG 3830 mm (12'7")

R2.95CB1

HD

4630 mm (15'2")
2590 mm (8'6")

3.0 m/10.0 ft 4.5 m/15.0 ft 6.0 m/20.0 ft 7.5 m/25.0 ft

m
ft

7.5 m kg *6500 *6500 *5450 *5450 6.43

25.0 ft lb *13,500 *13,500 *12,000 *12,000 21.1
6.0 m kg *6550 *6550 *5200 4850 *5150 4850 7.51
20.0 ft lb *14,350 *14,350 *11,350 10,750 24.6
4.5 m kg *8550 *8550 *7300 6750 *6700 4750 *5150 4150 8.18
15.0 ft lb *18,450 *18,450 *15,850 14,550 *14,650 10,250 *11,300 9,150 26.8
3.0 m kg *10 950 9850 *8400 6450 6950 4600 *5350 3800 8.54
10.0 ft lb *23,500 21,200 *18,200 13,850 14,900 9,950 *11,700 8,350 28.0
1.5 m kg *13 000 9200 *9450 6100 6750 4450 5500 3650 8.61
5.0 ft lb *28,050 19,800 20,350 13,150 14,550 9,600 12,100 8,050 28.2
0m kg *14 000 8850 9250 5900 6650 4350 5600 3700 8.42
0 ft lb *30,250 19,050 19,850 12,700 14,250 9,350 12,350 8,150 27.6
1.5 m kg *10 450 *10 450 *13 900 8750 9100 5800 6600 4300 6100 4000 7.94
5.0 ft lb *23,750 *23,750 *30,100 18,850 19,600 12,500 14,150 9,250 13,400 8,800 26.0
3.0 m kg *17 100 *17 100 *12 900 8850 9150 5850 7150 4650 7.11
10.0 ft lb *38,850 37,750 *27,850 19,000 19,700 12,550 15,900 10,350 23.3
4.5 m kg *14 250 *14 250 *10 500 9100 *7850 6350 5.78
15.0 ft lb *30,600 *30,600 *22,400 19,550 *17,200 14,300 19.0

ISO 10567

*Indicates that the load is limited by hydraulic lifting capacity rather than tipping load. The above loads are in compliance with hydraulic excavator lift capacity
standard ISO 10567:2007. They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. Weight of all lifting accessories must be deducted from the
above lifting capacities. Lifting capacities are based on the machine standing on a firm, uniform supporting surface. The use of a work tool attachment point to
handle/lift objects, could affect the machine lift performance.
Lift capacity stays with 5% for all available track shoes.
Always refer to the appropriate Operation and Maintenance Manual for specific product information.

23
326D2 L Hydraulic Excavator Specifications

Work Tool Offering Guide*

Boom Type HD Reach Boom

5.9 m (19'4")
Stick Size HD R2.95 (9'8")
Hydraulic Hammer H120Es,B20
H130Es,B30
H140Es
Multi-Processor MP318 CC Jaw

MP318 D Jaw

MP318 P Jaw

MP318 U Jaw

MP318 S Jaw

MP324 CC Jaw **

MP324 D Jaw **

MP324 P Jaw **^

MP324 U Jaw **^

MP324 S Jaw ^^

MP324 TS Jaw **^

Crusher P315
P325 **
Pulverizer P215
P225 **
Demolition and Sorting Grapple G320B **
G325B ***#
Mobile Scrap and Demolition Shear S320B
S325B ***#
S340B ##
Compactor (Vibratory Plate) CVP110
Orange Peel Grapple
Thumbs
These work tools are available for the 326D2 L.
Rakes
Consult your Cat dealer for proper match.
Center-Lock Pin Grabber Coupler
Dedicated Quick Coupler
* Offerings not available in all areas. Matches are dependent on excavator configurations. Consult your Cat dealer to determine what is offered in your area
andforproper work tool match.
** Pin On or CW coupler.
*** Pin On only.
# Over the front only.
## Boom mount.
^ Over the front only with CW coupler.

^^ Over the front only with CL coupler.

24
 326D2 L Hydraulic Excavator Specifications

Bucket Specifications and Compatibility China

326D2 L
HD Reach Boom
5.9 m (19'4")

2.95 HD (9'8")
Width Capacity Weight Fill
Linkage mm in m3 yd3 kg lb % 600 mm(24")
Without Quick Coupler
General Duty (GD) CB 1400 55 1.54 2.02 1116 2,459 100
Heavy Duty (HD) CB 1250 49 1.33 1.74 1120 2,469 100
CB 1300 51 1.36 1.78 1146 2,526 100
CB 1350 53 1.45 1.90 1180 2,601 100
CB 1400 55 1.54 2.02 1221 2,692 100
CB 1450 57 1.57 2.05 1248 2,751 100
CB 1500 59 1.65 2.16 1275 2,811 100
DB 1400 55 1.64 2.14 1448 3,190 100
Severe Duty (SD) CB 1250 50 1.33 1.74 1235 2,723 90
CB 1300 51 1.36 1.78 1263 2,784 90
CB 1350 54 1.45 1.90 1286 2,834 90
CB 1400 56 1.54 2.02 1355 2,985 90
DB 1250 50 1.40 1.84 1521 3,353 90
DB 1400 56 1.64 2.14 1643 3,621 90
Extreme Duty (XD) DB 1250 50 1.40 1.84 1709 3,768 90
DB 1400 56 1.64 2.14 1804 3,977 90
Maximum load pin on (payload + bucket) kg 3652
lb 8,049
With Pin Grabber Coupler
General Duty (GD) CB 1400 55 1.54 2.02 1116 2,459 100
Heavy Duty (HD) CB 1250 49 1.33 1.74 1072 2,363 100
CB 1300 51 1.36 1.78 1146 2,526 100
CB 1350 53 1.45 1.90 1132 2,496 100
CB 1400 55 1.54 2.02 1163 2,564 100
CB 1450 57 1.57 2.05 1248 2,751 100
CB 1500 59 1.65 2.16 1275 2,811 100
DB 1400 55 1.64 2.14 1448 3,190 100
Severe Duty (SD) CB 1250 50 1.33 1.74 1235 2,723 90
CB 1300 51 1.36 1.78 1263 2,784 90
CB 1350 54 1.45 1.90 1286 2,834 90
CB 1400 56 1.54 2.02 1355 2,985 90
DB 1250 50 1.40 1.84 1521 3,353 90
Extreme Duty (XD) DB 1250 50 1.40 1.84 1709 3,768 90
DB 1400 56 1.64 2.14 1804 3,977 90
Maximum load with coupler (payload + bucket) kg 3147
lb 6,937

Maximum Material Density:

The above loads are in compliance with hydraulic excavator standard EN474, they
2100 kg/m3 (3,500 lb/yd3)
do not exceed 87% of hydraulic lifting capacity or 75% of tipping capacity with front
linkage fully extended at ground line with bucket curled. 1800 kg/m3 (3,000 lb/yd3)
Capacity based on ISO 7451. 1500 kg/m3 (2,500 lb/yd3)
Bucket weight with General Duty tips. 1200 kg/m3 (2,000 lb/yd3)

Caterpillar recommends using appropriate work tools to maximize the value customers receive from our products. Use of work tools, including buckets, which are
outside of Caterpillars recommendations or specifications for weight, dimensions, flows, pressures, etc. may result in less-than-optimal performance, including
but not limited to reductions in production, stability, reliability, and component durability. Improper use of a work tool resulting in sweeping, prying, twisting and/or
catching of heavy loads will reduce the life of the boom and stick.

25
326D2 L Standard Equipment

Standard Equipment

Standard equipment may vary. Consult your Cat dealer for details.

ENGINE CAB UNDERCARRIAGE AND GUARDS

C7.1 ACERT electronic control engine Pressurized cab Idler and segmented track guiding guards
Meets China Nonroad III emission Mechanical suspension seat (two pieces)
standards Positive filtered ventilation Towing eyes on base frame
3000 m (9,842 ft) altitude capability without Adjustable armrest Grease lubricated track GLT2, resin
derating (Maximum 5000 m (16,404 ft) Seat belt, retractable (51 mm [2 in])
with derate from 3000 m [9,842 ft]) 70/30 split front windshield ELECTRICAL
Radial seal air filters Laminated upper front windshield and Batteries (2 900 CCA)
(primary and secondary filter) tempered other windows
Glow plugs Sliding upper door window LIGHTS
Automatic engine speed control with one Openable front windshield with assist device Working light, storage box mounted
touch low idle Interior lighting
Openable roof hatch
High ambient cooling package 52 C Cab mounted working lights
Removable lower windshield, within cab
(126F)
storage bracket
Water separator with water level SAFETY AND SECURITY
Pillar mounted upper windshield wiper
indicatorsensor Cat one key security system
andwasher
Radiator and oil cooler side by side with Door and compartment locks
Bi-level air conditioner (automatic) with
enough space for cleaning
defroster (pressurized function) Signaling/warning horn
Two speed travel
Full color and full graphic LCD display Fire wall between engine and pump
Electric (Priming) pump with warning, filter/fluid change, and compartment
Power modes (Eco and High Power) working hour information Emergency engine shutoff switch
Variable fan with viscous clutch Control lever joysticks, seat integrated Rear window, emergency exit
New fuel filtration system Neutral lever (lock out) for all controls Battery disconnect switch
(primary 1, twin main 2) Travel control pedals with removable Cap locks on fuel and hydraulic tanks
B20 biodiesel fuel capability handlevers Lockable tool box
Air-to-air-aftercooler Two stereo speakers
Radio mounting COUNTERWEIGHT
HYDRAULIC SYSTEM Beverage holder 4750 kg (10,470 lb) counterweight
Regeneration circuits for boom and stick Coat hook
Auxiliary hydraulic valve Interior lighting
Reverse swing damping valve Ashtray and lighter
Automatic swing parking brake Rear window, emergency exit
Boom drift reducing valve Capability to install two additional pedals
Stick drift reducing valve Bolt-on FOGS (Falling Objects Guarding
High performance hydraulic return filters System) capability
Hydraulic main pump Sun screen
Universal seal used in cylinders
Capability of installing additional valves,
pumps, circuits
Cat bio-oil capability

26
 326D2 L Optional Equipment

Optional Equipment

Optional equipment may vary. Consult your Cat dealer for details.

ENGINE UNDERCARRIAGE AND GUARDS FRONT LINKAGE

Starting kit, cold weather, <32 C (26 F) Long undercarriage Heavy Duty 5.9 m (19'4") reach boom with
600 mm (24") double grouser shoes left side light
HYDRAULIC SYSTEM 600 mm (24") triple grouser shoes R2.95CB1 (9'8") HD stick
Hammer circuit, foot pedal operated (HD) bottom R2.95CB1 (9'8") stick with bars
(HD) travel motor SLR is available in China
Swivel guard Bucket linkage without lifting eye is

available in China

TECHNOLOGY
Product Link

27
For more complete information on Cat products, dealer services, andindustry solutions, visit us on the web AEHQ7626 (08-2015)
atwww.cat.com (GCN1)

2015 Caterpillar
All rights reserved

Materials and specifications are subject to change without notice. Featured machines in photos may include
additional equipment. See your Cat dealer for available options.

CAT, CATERPILLAR, SAFETY.CAT.COM, their respective logos, CaterpillarYellow and the Power Edge
tradedress, as well as corporate and product identity used herein, are trademarks ofCaterpillarand may
notbeused without permission.

VisionLink is a trademark of Trimble Navigation Limited, registered in the United States and in other countries.