Innovative Solutions

THE UNIQUE DOUBLE TOOL

UNMANNED DEMINING SYSTEM

MV-10 www.dok-ing.com
The MV-10 is designed for demining and other associated
tasks. It can be deployed in support of technical survey and
clearance operations. While vast majority of the serious-
ly produced demining machines in medium & heavy class
include both a flail and a tiller, which are interchangeable, the
MV-10 is the only robotic system in the world with double tool:
front-positioned flail tool followed by a rear tiller.
Additionally, whilst other systems of similar class equipped with
tiller head can withstand detonations from AT mines to its flail,
the tiller is more vulnerable. The MV-10 is well secured from AT
explosive affect due to its double tool structure and tiller head
special design.
The system is capable of processing various types of terrain contain-
ing all types of AP and AT mines.
The flail and the tiller tools of the MV-10 can operate one at a time hav-
ing both forward and backward rotation. Depends on terrain, the MV-10
system normally applies both tools a rotating flail designed to activate
or shatter AP and AT mines, and a tiller tool that follows as the secondary
method and to keep the digging depth constant.
Excellent Maneuverability
& Cross Country Perfomance
In spite its respected size, the MV-10 has got excellent
cross-country performance. Its robust structure and low
silhouette in combination with the powerful engine enables
the MV-10 to operate in steep slopes and overcome various
obstacles (up to 2,0 m wide and 0,62 m high) and to pass through
water up to 0.8 m deep. It is remote controlled system easy to
operate by a single man from a safe distance up to 1500 m.

02 / DOK-ING MV-10 DOK-ING MV-10 / 03

MV-10 at glance
Remote control aerial
PTZ Video Camera Operational range up
360 degrees to 1500 m Video Antenna
Optical zoom
Lifting points
Lifting points

Rear & Front Side

Fixed zoom Video
Hardox-450 Segmented Cameras
Protective Shield

MV-10 hull made of Hardox-450

Deep profile tracks
can be equipped with rubber
pads - optional; to avoid damage
to hard surface
Standard Double Tool:
Front positioned Flail
& Rear Tiller

Segmented Roller Tool Rotational Gripper Tool

It is another optional exchangeable tool suitable It is the MV-10 optional tool primarily used
for a limited-scale mine clearance of paths and for rescue & cutting tasks, to safely handle
roads, area proofing, providing less disturbance dangerous objects, remove road blocks and
to soil. It operates by pressure and rotation of other obstacles by either pushing (up to
its 15 independent segments-rollers. This tool 12 tones on a hard surface) or lifting them
is also useful for verification of already cleared (up to 3 tones).
ground and as a confidence building measure
04 / DOK-ING MV-10 DOK-ING MV-10 / 05
among local population.
 TRAINING
The major advantage of DOK-ING it is both producer
and successful end-user of its demining robotic sys-
tems, hence the MV-10 machine is operator-friendly.
Over 16 years history in practical demining with zero
casualty rate, DOK-ING has transferred into a custom-
er-focused comprehensive training course in English,
Russian, Arabic, Croatian and other languages. All train- MAINTENANCE
ing is conducted in both theory and practice and provid-
The MV-4 is easily accessible for inspection, mainte-
ed for operators, mechanics and electricians.
nance, trouble-shooting, repair and/or replacement.
The course is run for about 2-3 weeks depending on the Maintenance and repairs can be carried out in a field or
number and type of the MV-10 supplied tools, future in a workshop conditions. The tools required for repairs
students qualifications and their experience with re- and maintenance are standard wrenches and additional
motely controlled demining robotic systems. Only can- specially modified tools. The recommended preventive
didates successfully passed training course and final maintenance is on a daily basis, while regular service is
PROTECTION test exam, would be certified to work with the MV-10. required to carry out after every 200 working hours.

The MV-10 Robotic System has got highly effective protection by the Swedish
HARDOX-450 steel plates, which increase the MV-10 survivability. This special material AFTER SALES SUPPORT
is highly resistant to fragments of landmines, extreme temperature span, tear and wear.
As the commitment for a high-quality reliable service to
its customers, DOK-ING maintains adequate stocks of
spare parts at its premises, runs in-house full service
capabilities and can send a rapid response technical
team at a short notice worldwide.

TRANSPORT OPTIONS
The MV-10 dimensions are within the required limits for road transportation, which is normally undertaken using
a standard flat-bed or low loader trailer. It can also be air lifted by various cargo planes (C-130, C-5, IL-76 and
similar). For sea transport the MV-10 Double Tool shall be detached from a Prime Mover and put into a separate
20 sea container.

06 / DOK-ING MV-10 DOK-ING MV-10 / 07

 Innovative Solutions

MV-10 TECHNICAL CHARACTERISTICS

Dimensional data Obstacle Negotiation

Length without attachment Hill climbing ability (max grade slope ) 40

4800 mm
(prime mover alone)
Side slope () 30
Length total (w/std. flail/tiller tool) 7227 mm
Vertical obstacle to climb 51 cm
Width without attachment
2270 mm Vertical obstacle to descend 62 cm
(prime mover alone)

Width total (w/std. flail/tiller tool) 2930 mm Fording depth 80 cm

Ground clearance 450 mm Trench width (w/std. double tool) 200 cm

Height overall (w/std. flail/tiller tool) 2380 mm Specification of Mine Clearing Equipment

Mass basic vehicle Flail/Tiller tool dimensions (LxWxH) 2810 x 2930 x 1775 mm
15 760 kg
(prime mover w/lubricants, no fuel)
Flail/Tiller tool weight (Hardox-450) 4554 kg
Mass basic vehicle
16 163 kg Flail/Tiller tool clearing width 2450 mm
(prime mover w/lubricants & fuel)
Number of chains (Flail Tool) 44
Mass detachable tool(s) 1600 - 5200 kg

Mass overall MV-10 Flail drum diameter 406 mm

20 950 kg
(w/std. flail tool, w/lubricants, no fuel) Flail rotation speed (rpm) 0-1100 rpm
Mass overall MV-10 Clearance depth (flail) in various terrain 30cm (depending on terrain)
21 350 kg
(w/std. flail tool, w/lubricants & fuel)
Number of chisels (Tiller Tool) 58
Engine
Tiller drum diameter 475 mm
Make & Model CATERPILLAR C18
Tiller rotation speed (rpm) 0-540 rpm
In-line, turbo-charged diesel, 4-stroke,
Engine Description water cooled, electronically regulated, Clearance depth (tiller) in various terrain 40 cm (depending on terrain)
6 cylinders
Method of operation remote control
Rated power 570.5 kW (765 HP) at 2100 rpm
Control of clearance depth automatically adjusted
Rotation direction (from flywheel end) Counterclockwise
Video control system optional, available on request
Torque at rpm 3495 Nm at 1400 rpm
Protection level Hardox-450 plates
Engine weight (approximate) 1673 kg
Specification of Extra Attachable Operational Equipment
Fuel capacity 480 liters
Rotational Gripper Tool
Fuel consumption 25-50 liter/hour
Rotational Gripper dimensions (LxWxH) 2135 x 2500 x 1475 mm
Cooling system type & volume water cooled, 80 liters
Rotational Gripper weight 1588 kg
Engine oil capacity 80 liters
Rotational Gripper claws max openning 1860 mm
Undercarriage
Rotation 360 in both directions
Metal tracks 600 mm width, deep
Tracks description Rotational Gripper pushing capacity
profile up to 12 tones
(hard surface)
Ground bearing pressure 0.69 kg/cm (w/std. doublel tool)
2

up to 3 tones (subject to a shape and

Power transmission Hydrostatic system Rotational Gripper lifting capacity
material of lifting object)
Independent for propulsion and any Rotational Gripper claws max pressure 1500 kg
Type
tools operation
Video control Optional, available on request
Gearbox (multiplying) Stiebel 4383, i=0.8125
Segmented Roller Tool
Gearbox oil capacity 5,5 liters
Segmented roller dimensions (LxWxH) 1200 x 2987 x 1503 mm
Hydraulic oil capacity 420 liters
Segmented roller weight 4387 kg
Track gearbox oil capacity 2 x 1.5 liters
Number of rollers 15 Roller segments
Transport speed 0-7 km/hour
Roller segment diameter 535 mm
Operating speed in clearing mode
0.1-0.8 km/hour Roller segment mass 170 kg
(flail/tiller)

Operating speed with segmented roller 0.1-0.8 km/hour Segmented roller drum diameter 168 mm

DOK-ING Ltd.
Kanalski put 1, 10000 Zagreb, Croatia R&TTE Directive 1999/5/EC, EMC Directive 2004/108/EC,
T +385 1 2481 300 / F +385 1 2481 303 Low Voltage Directive 2006/95/EC, Machinery Directive 2006/427EC
info@dok-ing.com / www.dok-ing.com Other references: IMAS 09.50, CWA 15044:2009, CWA 15832:2008