The document contains the G-code for cutting a 3D shape using a V-bit tool. It describes cutting two profiles: one starting at coordinates X0.000 Y0.000 and another starting at X6.974 Y9.065. Both profiles involve cutting complex curved paths at a depth of 1mm and feed rate of 240mm/min or 60mm/min for plunging moves.
The document contains the G-code for cutting a 3D shape using a V-bit tool. It describes cutting two profiles: one starting at coordinates X0.000 Y0.000 and another starting at X6.974 Y9.065. Both profiles involve cutting complex curved paths at a depth of 1mm and feed rate of 240mm/min or 60mm/min for plunging moves.
The document contains the G-code for cutting a 3D shape using a V-bit tool. It describes cutting two profiles: one starting at coordinates X0.000 Y0.000 and another starting at X6.974 Y9.065. Both profiles involve cutting complex curved paths at a depth of 1mm and feed rate of 240mm/min or 60mm/min for plunging moves.
The document contains the G-code for cutting a 3D shape using a V-bit tool. It describes cutting two profiles: one starting at coordinates X0.000 Y0.000 and another starting at X6.974 Y9.065. Both profiles involve cutting complex curved paths at a depth of 1mm and feed rate of 240mm/min or 60mm/min for plunging moves.