Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 11 views

    Connect As Below:: Serial Suite: ECU Plug

    Uploaded by

    Osmar Augusto
    This document provides instructions for connecting a serial suite to an ECU plug. It specifies that the red wire of the serial suite should connect to the 3 pin red connector of the ECU plug for power, the black wire to the single pin black connector for ground, the green wire to the single pin green connector for the K Line, and the yellow wire to the single pin yellow connector for flash voltage. The document also provides contact information for Piasini Engineering.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Connect As Below:: Serial Suite: ECU Plug

    Uploaded by

    Osmar Augusto
    11 views1 page
    This document provides instructions for connecting a serial suite to an ECU plug. It specifies that the red wire of the serial suite should connect to the 3 pin red connector of the ECU plug for power, the black wire to the single pin black connector for ground, the green wire to the single pin green connector for the K Line, and the yellow wire to the single pin yellow connector for flash voltage. The document also provides contact information for Piasini Engineering.

    Original Description:

    Mitsu evo9

    Original Title

    Mitsu Evo9

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides instructions for connecting a serial suite to an ECU plug. It specifies that the red wire of the serial suite should connect to the 3 pin red connector of the ECU plug for power, the black wire to the single pin black connector for ground, the green wire to the single pin green connector for the K Line, and the yellow wire to the single pin yellow connector for flash voltage. The document also provides contact information for Piasini Engineering.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    11 views1 page

    Connect As Below:: Serial Suite: ECU Plug

    Uploaded by

    Osmar Augusto
    This document provides instructions for connecting a serial suite to an ECU plug. It specifies that the red wire of the serial suite should connect to the 3 pin red connector of the ECU plug for power, the black wire to the single pin black connector for ground, the green wire to the single pin green connector for the K Line, and the yellow wire to the single pin yellow connector for flash voltage. The document also provides contact information for Piasini Engineering.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    Connect as below:

    Serial Suite: ECU Plug:

    Red to 3 Pins Red (Power Supply +12 Volt)


    Black to 1 Pins Black (Ground)
    Green to 1 Pin Green (K Line)
    Yellow to 1 Pin Yellow (Flash Voltage)

    Piasiniengineering info@piasinienginnering.it http://www.piasiniengineering.it


    Tel: +39 0342 489060 - Fax: +39 0342 488298

    You might also like