Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 72 views

    ME7.3.1 Fiat PDF

    Uploaded by

    Osmar Augusto
    This document provides instructions for connecting a serial suite to an ECU plug. It specifies that the red wire from the serial suite should connect to the red 5-pin connector on the ECU plug for power, the black wire connects to the ECU case for ground, the green wire connects to the green single-pin connector for the K Line, and the blue wire connects to the blue single-pin connector for the boot pin. It also provides contact information for Piasini Engineering.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    ME7.3.1 Fiat PDF

    Uploaded by

    Osmar Augusto
    72 views1 page
    This document provides instructions for connecting a serial suite to an ECU plug. It specifies that the red wire from the serial suite should connect to the red 5-pin connector on the ECU plug for power, the black wire connects to the ECU case for ground, the green wire connects to the green single-pin connector for the K Line, and the blue wire connects to the blue single-pin connector for the boot pin. It also provides contact information for Piasini Engineering.

    Original Title

    ME7.3.1_Fiat.pdf

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides instructions for connecting a serial suite to an ECU plug. It specifies that the red wire from the serial suite should connect to the red 5-pin connector on the ECU plug for power, the black wire connects to the ECU case for ground, the green wire connects to the green single-pin connector for the K Line, and the blue wire connects to the blue single-pin connector for the boot pin. It also provides contact information for Piasini Engineering.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    72 views1 page

    ME7.3.1 Fiat PDF

    Uploaded by

    Osmar Augusto
    This document provides instructions for connecting a serial suite to an ECU plug. It specifies that the red wire from the serial suite should connect to the red 5-pin connector on the ECU plug for power, the black wire connects to the ECU case for ground, the green wire connects to the green single-pin connector for the K Line, and the blue wire connects to the blue single-pin connector for the boot pin. It also provides contact information for Piasini Engineering.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    Connect as below:

    Serial Suite: ECU Plug:

    Red to 5 Pin Red (Power Supply +12 Volt)


    Black to ECU Case (Ground)
    Green to 1 Pin Green (K Line)
    Blue to 1 Pin Blue (Boot pin)

    Piasiniengineering info@piasinienginnering.it http://www.piasiniengineering.it


    Tel: +39 0342 489060 - Fax: +39 0342 488298

    You might also like