Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 294 views

    ME7.2 Porsche

    Uploaded by

    Osmar Augusto
    The document provides instructions for connecting a Serial Suite device to an ECU plug for reading and writing the ECU. It specifies connecting the red wire to the 5 pin red port for power, the black wire to the 1 pin black port for ground, and the green wire to the 1 pin green port for the K Line. It also notes to connect the boot pin on the Serial Suite blue banana cable to initiate identification through the software button, which will display "Ready" once complete.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    ME7.2 Porsche

    Uploaded by

    Osmar Augusto
    294 views2 pages
    The document provides instructions for connecting a Serial Suite device to an ECU plug for reading and writing the ECU. It specifies connecting the red wire to the 5 pin red port for power, the black wire to the 1 pin black port for ground, and the green wire to the 1 pin green port for the K Line. It also notes to connect the boot pin on the Serial Suite blue banana cable to initiate identification through the software button, which will display "Ready" once complete.

    Original Description:

    Porsche

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document provides instructions for connecting a Serial Suite device to an ECU plug for reading and writing the ECU. It specifies connecting the red wire to the 5 pin red port for power, the black wire to the 1 pin black port for ground, and the green wire to the 1 pin green port for the K Line. It also notes to connect the boot pin on the Serial Suite blue banana cable to initiate identification through the software button, which will display "Ready" once complete.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    294 views2 pages

    ME7.2 Porsche

    Uploaded by

    Osmar Augusto
    The document provides instructions for connecting a Serial Suite device to an ECU plug for reading and writing the ECU. It specifies connecting the red wire to the 5 pin red port for power, the black wire to the 1 pin black port for ground, and the green wire to the 1 pin green port for the K Line. It also notes to connect the boot pin on the Serial Suite blue banana cable to initiate identification through the software button, which will display "Ready" once complete.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    Connect as below:

    Serial Suite: ECU Plug:

    Red to 5 Pins Red (Power Supply +12 Volt)


    Black to 1 Pins Black (Ground)
    Green to 1 Pin Green (K Line)

    Piasiniengineering info@piasinienginnering.it http://www.piasiniengineering.it


    Tel: +39 0342 489060 - Fax: +39 0342 488298
    Bootstraps Pin:

    The boot pin you have to connect it to Serial Suites blue banana through the
    appropriate cable and the metal point. Hold connect the metal point, press on the
    SerialSuite software button Identify and wait until you see on the softwares
    windows Ready, then you can remove the metal point and you are able to READ and
    WRITE the Ecu.

    Piasiniengineering info@piasinienginnering.it http://www.piasiniengineering.it


    Tel: +39 0342 489060 - Fax: +39 0342 488298

    You might also like