3D TRASAR Solid Cooling Water

Analyzer Panel An Ecolab Company

Specification SPEC-629

Description
The Nalco 3D TRASAR Solid Cooling Water Analyzer
Panel is the main component of the 3D TRASAR Solid
Cooling Water System.
Analyzes and controls feed of 3D TRASAR Solid
inhibitor product based on configured PPM
(part per million) set point
Analyzes and controls cooling water conductivity
based on configured set point
Analyzes and controls oxidizing biocide feed based
on configured ORP set point or timer
Controls feed of non-oxidizing biocide based on
configured timer
Controls and monitors the 3D TRASAR Solid
inhibitor dispenser
Logs and sends monitored and calculated data to
the Nalco server, website and the Nalco 360 remote
24/7 team of experts

3D TRASAR Analyzer Panel Specifications

Specifications Details
Dimensions (H x W x D) 33 x 33 x 16
Weight 65 lbs
Electrical Requirements 85250 Vac, 50/60 Hz, Max.1560 VA (14.2A @110 Vac, 6.8A @230 Vac)
(Controller is supplied with a prewired power cord)
Supply water requirements Cooling system sample water
Discharge water requirements Outlet water to be plumbed to low pressure side of cooling system
Minimum flow requirement 3 GPM (gallons per minute)
Pressure requirements Minimum 10 psig, Maximum 90 psig
Temperature limits Minimum 40F, Maximum 120F
Sample water inlet connection FNPT (female national pipe thread)
Sample water outlet connection FNPT (female national pipe thread)
Piping material Schedule 80 PVC
Back panel material Powder coated carbon steel
Mounting Z-Bracket provided to wall mount
3D TRASAR Solid Cooling Water
Controller
Displays measured and calculated parameters
Controls external chemical dosing pumps and blow
down valve.
Logs readings and alarms.
Sends data via a built in wireless gateway to the
Nalco server
Configuration is downloaded from my.nalco.com,
USB stick, or created via touch screen

Specification Details
Electrical power 85250 Vac, 50/60 Hz, Max.1560 VA (14.2 A @110 Vac, 6.8 A@230 Vac)
(Controller is supplied with a prewired power cord)
Analog inputs 8, non-isolated, 4...20mA or 010V. For voltage inputs, the input impedance is
240 for mA and 110K for V.
Digital inputs 16, contact or open collector NPN transistor/FET (5mA sink, 24Vdc, signal to ground):
8: e.g. flow switch, remote start/stop (interlock)
4: 0100 Hz, e.g. water meter pulse
4: 01000 Hz, e.g. flow meter
ORP Inputs 2, smart sensor, shield
Conductivity inputs 2, Each input can be temperature compensated (user selectable).
1: Inductive, toroidal, 2 coils, smart sensor, PT1000, range 5002,000,000 S/cm.
1: Contacting, smart sensor, range 05,000 S/cm.
Temperature inputs 6, non-isolated, 4-wire, 1000, platinum RTD (PT1000). Range: -18427C, 0800F.
Control relay outputs 8, SPDT (NO/NC), mechanical, max. 250Vac, max. 12A for all 8 relays combined.
Each relay fused at 4A, powered or contact operation.
Alarm relay outputs 2, SPDT (NO/NC), mechanical, max. 250 Vac, fused at 1.0 A. contact operation.
Analog outputs 8, non-isolated, self-powered, 4-20 mA. (<600 ). For PID control or monitoring of
measurements in DCS.
24Vdc power supply Regulated, max. 2.5A.
Enclosure NEMA 4, IP65, 449C, 40120F, Relative Humidity 0-95% non-condensing,
password protected.
Communications 3x Ethernet ports
1x USB for memory stick.
1x built-in wireless gateway, GSM/GPRS, CDMA, 3G, security via VPN firewall.
3D TRASAR Fluorometer
Multi-channel fluorescence and light monitor

Desiccant canister and color-coded humidity

indicator turn dark pink when optics and
electrical components are exposed to
condensation

Specification Details
TRASAR #2 and Tagged Range: 13 ppb15 ppm as TRASAR #2 or Tagged Polymer
Polymer measurements (e.g. 1.3 ppm1500 ppm inhibitor if Product Factor is 100)
Accuracy: +/- 5% of reading
Bio-reporter and Range: 030 0ppb
Bio-product measurements Accuracy: +/- 5% of reading
Turbidity measurement Range: Turbidity in Nalco turbidity units are consistent with Nephelometric
Turbidity Units up to 40 NTU; deviates from standard NTU above 40 NTU)
Accuracy: +/- 5% of reading
Cell fouling Range: 0100%
Accuracy: +/- 5% of reading
Calibration Single 2-point calibration for TRASAR, Tagged Polymer, Bio-reporter and
Bio-product
Sample temperature 460C @1.5 bar, 40140F @22 psi
Sample pressure 06.9 bar @35C, 0100 psi @95F
Power and communication Via 3D TRASAR controller (6V and Modbus)
Wetted materials PVC, Quartz, SS

ORP Probe
ORP: Oxidation Reduction Potential
(also known as redox potential)
Voltage measurement between a noble metal and a
reference electrode Indication of the free chlorine
concentration that is removed by dosing bi-sulfite.
Unit of measure: mV (millivolt)

Specification Details
Range pH: pH 014, ORP: 01000 mV
temperature: 0100C, 32212F
Calibration pH: 2-point with pH 7 and 10 or pH 4 and 7 + 1 point inline
ORP: 2-point with 200 mV and 600 mV + 1 point inline
Accuracy pH 0.05, ORP: +/-5% of reading
Sample Pressure 010.3 bar, 01500 psi @ temperature
Sample Temperature 5110C, 40230F @ pressure
Required conductivity 100-10,000 uS/cm
Wetted materials Body: PPS (Ryton), seal: FKM (Viton), sensor: glass
Max. cable length TBD
Conductivity Probe
Type: Inductive, toroidal
Smart sensor: automatic recognition of sensor type,
serial number, first calibration Coil 1 induces an
electrical current in the water. Coil 2 detects induced
current. The current is proportional to the conductivity
of the water. Unit of measure: S/cm (micro Siemens
per cm) contains an internal PT1000 temperature
sensor for temperature compensation.

Specification Details
Range 5002,000,000 S/cm, 0100C, 32212F
Calibration 2-point and 1-point calibration
Accuracy +/- 5% or reading
Sample Pressure Max. 6.9 bar @35C, 100 psi @95F
Sample Temperature 0100C, 32212F @ pressure
Wetted materials Body: PPO-PS blend (Noryl), seal: FKM (Viton synthetic rubber)
Max. cable length TBD

Flow Switch
Type: Reed contact switch
Magnetic float is pushed upwards by sample water flow.
Above a certain flow (fixed), the reed contact output
remains closed. Used for determining if sample water
is representative of system water.

Specification Details
Switching point 0.5 gpm, 113 L/h
Signal output Potential free contact

T-Strainer
Specification Details
Mesh size 20 (0.9 mm)
Pressure 010.3 bar @ 21C, 0150 psi @ 70F
06.9 bar @ 52C, 0100 psi @ 125F
Materials Top: PP, bowl: Nylon, Mesh: SS304
Mesh size 20 (0.9 mm)

To Order Support
Contact your local Nalco Sales Engineer. If you have any questions, please contact your Nalco
representative. In North America, you can contact
the Nalco Global Equipment Solutions Help Desk at
1-800-323-8483.

Spare Parts and Accessories

3D TRASAR Fluorometer and Sensors

Material Description
060-TR5220.88 3D TRASAR Fluorometer
060-TR5221.88 3D TRASAR Fluorometer,Cable
3DT-ORPPRB1.88 NXG ORP Probe,1-Wire Red
3DT-ORPCBL1.88 NXG ORP Cable,1-Wire Red
3DT-CONDT1.88 NXG Cond Probe,Toroidal,1-Wire Yel
3DT-CNDTCAB1.88 NXG Cond Cable,Toroidal,1-Wire Yel
3DT-CONDTOR.88 NXG Cond O-Ring,Toroidal,Buna-N
3DT-CONDTTEE.88 NXG Cond Tee,Toroidal,CPVC W/Nut

Plumbing
991-05053773.88 T-Strainer, PP,1, FPT,20 MESH, CLEAR
6000668 Flow Switch, PVC, 3/4, FPT

Material Description
3DT-CWSKIT1-88 3D TRASAR Solids Start Up & Calibration Kit (includes items below)
460-S0940.75 S0940-3D TRASAR
460-S0297.75 Soln 1 L 3000 Micromho Standard
460-S0298.75 Soln 1 L 600 Micromho Standard
460-S0800.75 Soln 1L 10% Sulfuric Acid
500-P2817.88 Tube Brush, Nylon, 5/16 x 2-1/2 x 16
500-P0116.88 Beaker Disp PLS 800 ML
500-P2147.88 Syringe, Plastic ,60 cc, Luer-Lok TIP
General Arrangement Drawing

Nalco, an Ecolab Company

North America: Headquarters 1601 West Diehl Road Naperville, Illinois 60563 USA
Nalco Champion 7705 Highway 90-A Sugar Land, Texas 77478 USA
Europe: Richtistrasse 7 8304 Wallisellen Switzerland
Asia Pacific: 2 International Business Park #02-20 The Strategy Tower 2 Singapore 609930
Latin America: Av. das Naes Unidas 17.891 6 andar So Paulo SP Brazil CEP 04795-100
www.nalco.com

3D TRASAR, Nalco 360, Ecolab, NALCO and the logos are Trademarks of Ecolab USA Inc.
All other trademarks are the property of their respective owners
2014 Ecolab USA Inc. All Rights Reserved 6-14