Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 595 views

    Geomil Electrical CPT (U) Leaflet

    Uploaded by

    Agus Wahyudi
    Electrical cones use strain gauges to measure cone resistance (qc), sleeve friction (fs), pore water pressure (u), and inclination (i) during cone penetration testing. Load cells transmit the measurements as voltage signals via cable to a data acquisition system for digitization. Standard cones have measuring ranges of 100 or 50 MPa for qc and 1 or 0.5 MPa for fs. A typical system includes an electrical cone, cable, push/pull clamp, depth encoder, data acquisition system, tubes, and software for data recording and interpretation.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Geomil Electrical CPT (U) Leaflet

    Uploaded by

    Agus Wahyudi
    595 views1 page
    Electrical cones use strain gauges to measure cone resistance (qc), sleeve friction (fs), pore water pressure (u), and inclination (i) during cone penetration testing. Load cells transmit the measurements as voltage signals via cable to a data acquisition system for digitization. Standard cones have measuring ranges of 100 or 50 MPa for qc and 1 or 0.5 MPa for fs. A typical system includes an electrical cone, cable, push/pull clamp, depth encoder, data acquisition system, tubes, and software for data recording and interpretation.

    Original Description:

    HREHREHRERHERHE

    Original Title

    Geomil Electrical CPT(U) Leaflet

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Electrical cones use strain gauges to measure cone resistance (qc), sleeve friction (fs), pore water pressure (u), and inclination (i) during cone penetration testing. Load cells transmit the measurements as voltage signals via cable to a data acquisition system for digitization. Standard cones have measuring ranges of 100 or 50 MPa for qc and 1 or 0.5 MPa for fs. A typical system includes an electrical cone, cable, push/pull clamp, depth encoder, data acquisition system, tubes, and software for data recording and interpretation.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    595 views1 page

    Geomil Electrical CPT (U) Leaflet

    Uploaded by

    Agus Wahyudi
    Electrical cones use strain gauges to measure cone resistance (qc), sleeve friction (fs), pore water pressure (u), and inclination (i) during cone penetration testing. Load cells transmit the measurements as voltage signals via cable to a data acquisition system for digitization. Standard cones have measuring ranges of 100 or 50 MPa for qc and 1 or 0.5 MPa for fs. A typical system includes an electrical cone, cable, push/pull clamp, depth encoder, data acquisition system, tubes, and software for data recording and interpretation.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 1

    Electrical cones

    Geomil Equipment electrical CPT(U) cones, The load cell signals are amplified and transmitted up-
    compression or subtraction design, is the measuring hole as a voltage signal via cable and converted to a 16
    method for Cone Penetration Testing. Quality load cells bit digital signal in the GME 500 data acquisition
    and high precision calibration make all electrical cones system.
    complying to EN ISO 22476-1 standards.
    The cones can also be provided with a temperature (T)
    The electric cone measures the cone resistance (qc) senor and environmental or seismic adapters.
    and local sleeve friction (fS), using strain gauged
    measuring bodies. In addition, (excess) pore water A typical Geomil electrical CPT system comprises:
    pressure (u) is measured by a piezo element and the
    inclination (i) by accelerometers. Geomil uses an Electrical compression or subtraction cone with 10
    inclination sensor for x- and y- deviation. cm2 or 15 cm2 cross-sectional area, supplied in
    portable protection case.
    Standard measuring ranges are 100 or 50 MPa for qc CPT cable, available in standard lengths of 2, 10, 30
    and 1 or 0.5 MPa for (fS). and 50 m or customized length on request.
    Push-/pull clamp 3655 with a proximity switch for
    Standard available: triggering the depth recording.
    GC10CFIIP.(C)100.(F)1000.(I)15.(I)15.(P)20 Depth encoder, providing incremental digital
    GC10CFII.100.1000.15.15 pulses.
    GS10CFIIP.100.1000.15.15.20 Data acquisition system GME 500 for A/D
    GS10CFII.100.1000.15.15 conversion and data synchronization.
    GC15CFIIP.100.1000.15.15.20 CPT tubes and cross-over adapter.
    GC15CFII.100.1000.15.15 Windows computer for automatic recording of the
    GS15CFIIP100.1000.15.15.20 CPT data.
    GS15CFII.100.1000.15.15 Windows based CPTest acquisition and CPTask
    presentation and interpretation software.
    Explanation cone codes:
    C-100 = (qc) max. 100 MPa For more technical information or a quotation based
    F-1000 = (fS) max. 1000 kPa on your specific demands please contact
    I- 15 = max. 15 degrees inclination sales@geomil.com or call us at 0031 (0) 172 427800.
    P-20= max. 20 bar

    0060_01

    You might also like