Masterbatch

Additives
23 Masterbatch

CERETAN micronized waxes

for Colour Masterbatch
Today all typical processes of the plastics industry waxes. Compared to traditionally used wax powders

use Masterbatches. They are to be found in processes CERETAN waxes offer various advantages. This brochure
of extrusion, injection moulding and blow moulding. helps to find the best suitable products and enables
Master
batches consist of a polymer, pigments and you to optimize your Masterbatch as well.

High performance dispersing agents

Reduction of wax usage Reduced clogging of filters
Increased colour strength by 5%15% Less mixing time necessary
Reduction of pigment costs Less extrusions necessary
Lower filter pressure

Comparison of the particle size

Micronized waxes
The spherical shape guarantees:
Very good dispersibility
Constant and consistant
colour output
No film tearing
Reduced clogging of filters
and centrifuges
Wax powder (500 m) CERETAN micronized waxes
Pigment (1 m) (e.g. CERETAN MX 9820,
D50 < 8 m)
Pigment (1 m)

Level of addition
The dosage level of our waxes depends on various factors, such as your individual Masterbatch formulation, the
kind of application, the used pigments and plastics. According to your requirements, a dosage of 0,5%15% of
CERETAN waxes is advisable.
Reduction in wax usage
MNZING a leading manufacturer of spray micronized Lower filter pressure
waxes produces up to 100 times smaller particles than By using CERETAN micronized waxes the flow capability
traditional powder waxes. Offering identical chemical of the processed material will be improved. Therefore,
properties CERETAN waxes are more effective due to clogging of filters is reduced and mounting of the
their particle size and shape. product can be eliminated (test results on page 4).

Dispersing agent Reduction in wax usage

The excellent wetting properties of CERETAN waxes The much finer particle size reduces the amount of
provide an improved dispersion of the components, waxes used. The expected results are achieved faster
especially in SPC (Single Pigment Concentrate). by incorporating CERETAN waxes instead of non micro-
nized waxes. The amount of foreign substances (such as
Increased colour strength by 515% agglomerates) in the formulation and sedimentation in
Improved pigment wetting properties of CERETAN waxes the processing tubes is reduced or even eliminated.
will result in an increased colour output.

Masterbatch production process

1..Polymer
2..Pigment
1 2 3
3..Wax
6 4..Polymer Silo
5..Mixing
4 5 6..Weighing
7..Extrusion
8..Compounding
9..Cooling
7 10.Waterbatch
7 9 11.Granuling

8
11
10

Figure | Production Process of Masterbatch

45 Masterbatch

Lower filter pressure

All tests have been conducted in mixed batches using cold mix application at a mixing time of 35 minutes with a
dosage of 510% wax and a pigment loading of 3040%.

PE and PP colour batches

Product Filter pressure
(bar/g), Filter 24 m

no wax used 0,50

non-micronized wax 0,40

CERETAN ME 1430 0,15

CERETAN MV 0330 0,15

Filter pressure
(bar/g), Filter 14 m
no wax used 6,50

non-micronized wax 4,50

CERETAN ME 1430 0,70

CERETAN MV 0330 0,60

Ps colour batches
Product Filter pressure
(bar/g), Filter 24 m

no wax used 0,50

non-micronized wax 0,40

CERETAN ME 1430 0,15

CERETAN MM 8120 0,15

CERETAN MV 0330 0,15

Filter pressure
(bar/g), Filter 14 m
no wax used 6,50

non-micronized wax 4,50

CERETAN ME 1430 0,70

CERETAN MM 8120 0,60

CERETAN MV 0330 0,60

The more viscous a wax the more flowable it is in the Masterbatch process, hence no residues are generated.
CERETAN waxes for colour Masterbatch
Micronized Products
CERETAN MA 7050 CERETAN MO 4615
This micronized amide wax (EBS) shows very good Spray micronized oxidized PE wax for PE batches and
performances with all pigment and plastic applications, PVC applications. Suitable for all kinds of pigments.
especially PS and ABS.

CERETAN ME 0980 CERETAN MP 2150

This micronized PE wax can be used for the production of SPC This micronized Polypropylene is used for all polyolefin
(Single Pigment Concentrate), as well as for mixed co- applications and some technical plastics. You can apply
lours. Even in very high concentrated colour batches it for all kinds of pigments. CERETAN MP 2150 works
CERETAN ME 0980 is the best suitable dispersing agent. more effective in your processes. Due to the fine
It can be used universally in many kinds of plastics and particle size, the dispersibility is much better compared
for the dispersion of all kinds of pigments. Generally to the usage of a non micronized wax.
speaking, PE waxes have excellent release properties.

CERETAN ME 1430 CERETAN MV 0330

Spray micronized PE wax for the production of SPC Compared to other products CERETAN MV 0330 shows
(Single Pigment Concentrate), as well as mixed colours. the best results in reducing filter pressure. Ethylene- Vi-
Even in very high concentrated colour batches CERETAN nyl- Acetate is suitable for all kinds of plastics, espe-
ME 1430 works as best suitable dispersing agent. It can cially for Carbon Black and pigments that are difficult to
be used universally in many kinds of plastics and for the disperse, but also for all other pigments. Due to the
dispersion of all kinds of pigments. Generally speaking micronized particles your processes will work more ef-
PE waxes have excellent release properties. Due to its fectively.
non polarity, it is not recommended in PVC.

CERETAN MM 8120/ CERETAN MM 8220 CERETAN MX 9820

Spray micronized Montan E and OP waxes, which This spray micronized blend of PE and FT can be used
are recommended for all kinds of inorganic and organic in all kinds of applications. Because of the combination
pigments. They can be used in more or less the whole of different chemistries it provides excellent dispersion
range of plastics. and lubrication properties.

Non-Micronized Products
CERETAN A 70 CERETAN A 71
If you require an amide wax (EBS) which is suitable for all This Erucamide wax has excellent flow properties in the
pigment and plastic applications CERETAN A 70 is the extrusion process. It is recommended to be used for all
right choice. We recommend it especially for PS and ABS. kinds of plastics except for PET and ABS.
67 Masterbatch

Product range for your Masterbatches

sPRAY mICRONIZED wAXES
Product Wax type Particle Drop Viscosity Density Acid
size point value
D99 C mPas g/cm3 mg KOH/g
CERETAN MA 7050 EBS 50 143151 2040 0,980,99 5

CERETAN ME 0980 Polyethylene 80 110120 1020 0,940,96 0

CERETAN ME 1430 Polyethylene 30 110118 300400 0,930,96 0

CERETAN MM 8120 Montan 20 8189 1020 1,001,02 1520

CERETAN MM 8220 Montan 20 96104 200400 1,001,02 717

CERETAN MO 4615 Oxid. Polyethylene 15 108116 200400 0,920,94 10

CERETAN MP 2150 Polypropylene 50 156164 100200 0,870,89 0

CERETAN MV 0330 EVA 30 105113 200600 0,930,95 0

CERETAN MX 9820 Polyolefin 20 111119 2060 0,940,95 0

Non-mICRONIZED wAXES
Product Wax type Drop Viscosity Density Acid
point value
C mPas g/cm3 mg KOH/g
CERETAN A 70 EBS 143151 2040 0,980,99 46

CERETAN A 71 Erucamide 8088 812 1,00 1

Crystallinity and polarity of CERETAN waxes

This graph shows you the correlation

of crystallinity and polarity among
various kinds of Masterbatches. The
Crystallinity (solidity; dimensional stability)

MA 7050
rectangular shapes in the graph rep-
HDPE resent the main types of plastic
PA
MP 2150 used in this particular industry. The
spheres next to the rectangular
PET
PP
boxesshow you the best suitable
CERETAN wax grades for the specific
ME 1430
kind of plastic.
MV 0330 MM-Series PE..non polar
LDPE PP..slightly polar
PS..polar
MO 4615 EVA PS PVC EVA PC

Polarity

Safety data Further information about all mentioned products can be found in the corresponding Material Safety Data Sheet. Moreover, informa-
tion concerning hazard class designation, safety measures, exact handling and s toring as well as information on disposal regulations can be found
in the MSDS.
Areas of Application according to...
Kinds of Plastic
Product LDPE HDPE PP PET PC PC PS PS PVC ABS PA PES
PBT transp. pigm. transp. pigm.

CERETAN MA 7050

CERETAN ME 0980

CERETAN ME 1430

CERETAN MM 8120

CERETAN MM 8220

CERETAN MO 4615

CERETAN MP 2150

CERETAN MV 0330

CERETAN MX 9820

CERETAN A 70

CERETAN A 71

LDPE = Low density polyethylene PBT = Polybutylene-Terephthalate ABS = Acrylnitrile-Butadiene-Styrene-Copolymers

HDPE = High density polyethylene PC = Polycarbonate PA = Polyamide
PET = Polyethylene-Terephthalate PS = Polystyrene PES = Polyester

Kinds of Pigment
Product Inorganic Organic TiO2 Carbon black Phthalo Difficult
pigments pigments cyanine to disperse
pigments
CERETAN MA 7050

CERETAN ME 0980

CERETAN ME 1430

CERETAN MM 8120

CERETAN MM 8220

CERETAN MO 4615

CERETAN MP 2150

CERETAN MV 0330

CERETAN MX 9820

CERETAN A 70

CERETAN A 71

Recommended Highly recommended

Please noteEverything in this brochure, including all information, applications and materials, is provided as is and without warranties of any
kind either express or implied. Unless otherwise stipulated by law, MNZING shall accept no warrantee or liability with regard to the correctness,
reliability or completeness of the content. The data included in here does not warrant any applicability for certain applications. It is the customers
responsibility to take necessary safety measures as well as to ensure the appropriate handling of the product.
 Contact

MNZING MNZING Chemie GmbH MNZING Chemie GmbH

Micro Technologies GmbH Neckartal 140 Salzstrasse 174
Dr.-Bergius-Strasse 1624 78628 Rottweil 74076 Heilbronn
06729 Elsteraue GERMANY GERMANY
GERMANY Phone +49 741 942 52-0 Phone +49 7131 987-0
Phone +49 3441 829 10-22 Fax +49 741 942 52-50 Fax +49 7131 987-125
Fax +49 3441 829 10-20 E-Mail lubaprint@munzing.com E-Mail info@munzing.com
E-Mail ceretan@munzing.com

MNZING MNZING MNZING North America

International S.a.r.L. Chemie Iberia S.A. 1455 Broad Street, Suite #3
23, rue Aldringen C/ Francesc Layret, 2 Bloomfield
L-1118 Luxembourg E-08170 Montorns NJ 07003-3003
Phone +352 2627 1520 del Valls (Barcelona) USA
Fax +352 2627 1530 Spain Phone +1 973 279-1306
E-Mail benelux@munzing.com Phone +34 93 5722075 Toll Free +1 800 524-0055
Fax +34 93 5722683 Fax +1 973 338-0420
E-Mail iberia@munzing.com E-Mail info@munzing.us

MNZING Shanghai Co.Ltd.

Room 404-408, Building 12
MMT_2013_006 06|13

No. 128 Xiangyin Rd.

USST National Science Park
Shanghai 200433
P.R. China Visit our website for more information
Phone +86 21 6149 1561 for international representatives
Fax +86 21 6149 1563
E-Mail info@munzing.cn www.munzing.com