9006ct1101 Encoders

Osisense XCC
Rotary Encoders
Catalog
Contents OsiSense XCC
Opto-electronic rotary encoders
Selection Guide. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
b Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
1
Incremental encoders
b 40 mm encoders, Type XCC14 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
b Food and Beverage: 58 mm encoders, Type XCC15, stainless steel . . . . . . . . 14

2
b 58 mm encoders, parameterable versions, Type XCC15 . . . . . . . . . . . . . . . . 17
Single turn absolute encoders

b 58 mm encoders, Type XCC25 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 3
b 58 mm encoders, Type XCC25, stainless steel . . . . . . . . . . . . . . . . . . . . . . . 22
b 90 mm encoders, Type XCC29. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Multi-turn absolute encoders 4

b 58 mm encoders, Type XCC35, stainless steel . . . . . . . . . . . . . . . . . . . . . . . 28
b 90 mm encoders, Type XCC39. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
5
b Connection accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Connection and mounting

b Connection accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
b Mounting and installation accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
6
Multi-turn fieldbus encoders
b CANopen. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
b Profibus. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
10
3
Selection Guide OsiSense XCC
Encoder type Incremental encoders
1 Applications Counting indication
Diameter of housing 40 mm 58 mm 58 mm 90 mm
3 parameterable
(multi-resolution) (1)
Shaft Solid 6 mm 6 mm and 10 mm 10 mm 12 mm

Through 6 mm 14 mm 14 mm 30 mm
6, 8, 10 and 12 mm 6, 8, 10 and 12 mm 12, 20 and 25mm
(with reduction collar) (with reduction collar) (with reduction
4
collar)
Resolution Incremental 100 ppr 100 ppr 100 ppr 100 ppr
encoders 256 ppr 2564096 ppr
360 ppr 360 ppr 360 ppr 3605760 ppr 360 ppr
500 ppr 500 ppr 500 ppr 5008000 ppr 500 ppr
1000 ppr 1000 ppr 1000 ppr 1000 ppr
5 1024 ppr
2500 ppr
1024 ppr

1024 ppr
2500 ppr
102416,384 ppr

1024 ppr
2500 ppr
3600 ppr 3600 ppr
4096 ppr
5000 ppr 5000 ppr 500080,000 ppr 5000 ppr
10,000 ppr 10,000 ppr
Absolute 4096 ppr/8192 turns
6 encoders (12-bit/13-bit)
8192 ppr
8192 ppr/4096 turns
(13-bit/12-bit)
Output Incremental Type R (N) 5 V, RS-422, 5 V, RS-422,

stage/supply encoders 4.55.5V 4.55.5V
(2)
7
Type K (N) Push-pull, 1130 V Push-pull, 1130 V
Type X 5 V, RS-422, 4.7530 V 5 V, RS-422, 4.7530 V
Type Y Push-pull, 530 V Push-pull, 530 V
Absolute Type KB (N) or KG (N)
encoders
Type SB (N) or SG (N)
Type C
8 Type F
Connection Pre-cabled, radial p

Connector, radial, M23 p p p
Terminal block, radial
Catalog Numbers XCC14ppppp XCC15ppppp XCC15ppppMppp XCC19ppppp
Pages 12 14 17 18
(1) Parameterable version: multiplication of the basic resolution of the disc using DIP switches. The factory setting is the one with the lowest value.
10 (2) Specifications of the output stage/supply types:

- Type R (N): 5V output driver, RS-422, 4.55,5V.
- Type K (N): push-pull output driver, 1130 V.
- Type X: 5V output driver, RS-422, 4.7530V.
- Type Y: push-pull output driver, 530 V.
- Type KB (N) or KG (N) output: push-pull output driver, 1130 V, binary code KB (N) or Gray code KG (N).
4
Single turn absolute encoders Multi-turn absolute encoders Accessories for
encoders
Absolute position indication within a revolution Absolute position indication within a revolution Fieldbus: CANopen, 1
and indication of the number of revolutions Profibus-DP
58 mm 90 mm 58 mm 90 mm 58 mm - Shaft couplings with

spring
- Anti-rotation devices 3
- Reduction collars
- Pre-wired connectors
6 mm and 10 mm 12 mm 6 mm and 10 mm 12 mm 10 mm
14 mm 30 mm 14 mm 30 mm 15 mm (hollow shaft)
6, 8, 10 and 12 mm 12, 20 and 25 mm 6, 8, 10 and 12 mm 16, 20 and 25 mm 6, 8, 10, 12 and 14 mm
(with reduction collar) (with reduction collar) (with reduction collar) (with reduction collar) (with reduction collar)

5

4096 ppr/8192 turns
8192 ppr 8192 ppr 6

8192 ppr/4096 turns 8192 ppr/4096 turns 8192 ppr/4096 turns
7

Push-pull, 1130 V, Push-pull, 1130 V,
binary or Gray binary or Gray
SSI, 13-bit, 1130 V, SSI, 13-bit, 1130 V, SSI, 25-bit, 1130 V, SSI, 25-bit, 1130 V,
binary or Gray binary or Gray binary or Gray binary or Gray
1130 V, CANopen
1130 V, Profibus-DP 8

p p p p p
p
XCC25ppppp XCC29ppppp XCC35ppppp XCC39ppppp XCC35pppppCBN XCCR, XCCP, XZC

XCC35pppppFBN
22 24 28 30 42, 46 34
(2) Specifications of the output stage/supply types (continued):

- Type SB (N) or SG (N): SSI output without parity, 13-bit or 25-bit, 1130 V, binary code SB (N) or Gray code SG (N).
- Type KB (N) or KG (N): push-pull output driver, 1130 V, binary code KB (N) or Gray code KG (N) with multi-turn connecting cable. 10
- Type C: binary CANopen serial link.
- Type F: binary Profibus serial link, RS485.
5
Overview OsiSense XCC
Opto-electronic rotary encoders 0
Applications The increase in the power of processing systems, combined with the requirements
for high productivity, has created the need for continuous information in all areas of
1 production regarding:
b counting, positioning by counting
b absolute positioning
b speed control
Example
The positioning of a moving part is fully controlled by the processing system via the
2
Programmable controller
encoder.
b Processing units
Variable Refer to the catalog, Premium automation platform.
speed drive
b Variable speed drives
Refer to the catalog, Variable speed drives and starters.
3
Terminal
4
Encoder Motor
Principle of the opto-electronic The opto-electronic rotary encoder is an angular position sensor.
5 rotary encoder
Mechanically coupled to the driving spindle of a machine, the shaft of the encoder
rotates a disc that comprises a succession of opaque and transparent sectors.
Light from light emitting diodes (LEDs) passes through the transparent sectors of the
disc as they appear. The light is detected by photosensitive diodes.
The photosensitive diodes, then generate an electrical signal, which is amplified and
6 converted into a digital signal before being transmitted to a processing system or an
electronic variable-speed drive.
The electrical output of the encoder therefore represents, in digital form, the angular
position of the input shaft.
7 Types of opto-electronic
rotary encoder
b Incremental encoders:
Counting, positioning by counting, speed.
b Parameterable incremental encoders:
Multiplication of the basic resolution of the disc using DIP switches (the factory
8 setting is the one with the lowest value).
b Single turn and multi-turn absolute encoders:
Absolute positioning.
b Fieldbus multi-turn absolute encoders:
CANopen and Profibus-DP.
10
6
Overview (continued) OsiSense XCC
Incremental encoder Principle

Inside track The disc of an incremental encoder comprises two types of track:
1
Outside track
b one or several outside tracks (channels A and B), comprising n equal angular
steps that are alternately opaque and transparent, with n being the resolution or
number of periods of the encoder,
b an inside track comprising a single window, which serves as the reference point
within each shaft revolution (top 0 or zero marker).
Wiring and settings

The operation of the photosensitive elements (LEDs + photosensitive diodes) is
1/4 period
based on the real-time differential optical reading principle:
b the photosensitive elements of tracks A and B are offset so that each will
3
simultaneously read only its respective slot (channels A and B are 90 electrically
Channel A offset),
b the electronics operate following the principle of real-time differential
1/2 period measurement.
Channel B Channel B (rising edge) arriving before A in the clockwise direction viewed from base
side.
4
360 period
Period: 360 electrical.

Top 0
Cyclic ratio: 180 electrical 10%.
Phase displacement: 90 electrical 25%.
Advantages of real-time differential optical reading
Reading by offset photosensitive elements 5
b Radial play of encoder shaft greater than 30%, which is higher than traditional
optical reading encoders.
b Maintains a phase displacement of channels A and B within the tolerance limits of
the unit.
Triple light source emission improves reliability

b Maintains cyclic ratio, even in the event of: 6
- failure of one of the 3 light sources,
- diminishing efficiency of the light sources (up to 30%),
- fine dust deposit on the optical components, reducing signal strength of the
photosensitive elements (up to 30%).
7
Absolute encoder Principle
Track B1 The disc of an absolute encoder comprises n concentric tracks, equally divided into
alternate opaque and transparent segments, and each track has its own transmitter
Track B2 and receiver.
8
Track B3
The inside track is half opaque and half transparent. Reading of this MSB (Most
Significant Bit) track determines in which half-turn the encoder is situated.
Track B4 The next track is divided into 4 quarters, alternately opaque and transparent. The
reading of this track, in conjunction with the previous track, determines in which
quarter-turn the encoder is situated.
Binary disc
Track G1
The following tracks enable successive determination of which eighth-turn,
sixteenth-turn, etc. the encoder is situated. 9
The outside track corresponds to the LSB (least significant bit) and provides the final
Track G2
accuracy. It has 2n pulses per revolution corresponding to the resolution of the
encoder. Therefore, for each angular position of the shaft, the disc provides a code.
Track G3 This code can be either binary or Gray.
Following one complete revolution of the encoder, the same coded values are
repeated. 10
Track G4 The multi-turn absolute encoder, in addition to providing the digital position within the
Gray disc revolution, also provides the total number of revolutions.
7
Overview (continued) OsiSense XCC
Absolute encoder (continued) Binary coding

The binary code is directly usable by processing systems (such as programmable
1 controllers) to execute calculations or comparisons, but has the disadvantage of
having several bits which change state between 2 positions.
0 1 2 3 4 5 6 7 8
B1
2 B2
B3
B4
3 Gray coding
The Gray code offers the advantage of only changing one bit between 2 consecutive
numbers.
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
G1
4 G2
G3
G4
5 Example of Gray code disc

0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
0
2 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0
22 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0
24 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 1
28 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0
216 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1
6 Representation of the first 24 decimal values corresponding to the reading of the first
5 tracks.
Advantages of position detection by an absolute encoder

An absolute encoder continuously provides a code that is an image of the actual
position of the moving object being monitored.
7 On power-up, or restart following a supply failure, the encoder provides data that is
directly exploitable by the processing system.
10
8
Selecting an encoder type OsiSense XCC
Specifications required to define an encoder
7 specifications to be established 1 Function

b Incremental encoder
Provides counting indication. 1
b Single turn absolute encoder
Provides absolute position within each revolution.
b Multi-turn absolute encoder

Provides absolute position within each revolution and indicates total number of
revolutions.
2 Diameter of housing
2
b Incremental encoders
40, 58 and 90
b Single turn and multi-turn absolute encoders
3
58 and 90
3 Diameter of shaft
b 6 mm to 30 mm, depending on model
b Reduction collars
For 58 and 90 mm encoders, with 14, 15 and 30 mm through-shaft,
reduction collars are available to reduce the diameters:
- from 14 to 6, 8, 10 and 12
- from 15 to 6, 8, 10, 12 and 14
4
- from 30 to 12, 16, 20 and 25.
4 Type of shaft
b Solid shaft
The shaft of the encoder is mechanically linked to a drive shaft using a flexible
coupling, which eliminates alignment inaccuracies.
5
b Through-shaft/Hollow shaft
The encoder is mounted directly on the drive shaft. A flexible mounting kit
prevents encoder rotation and compensates for alignment inaccuracies.
5 Connection method 6
b Pre-cabled with 2 m shielded cable or M23/M12 connector.
b Radial type connection.
6 Resolution
b Number of pulses per revolution.
b Number of revolutions (for multi-turn absolute encoders).
b On 58 parameterable incremental encoders, this resolution can be adjusted
7
using DIP switches (multiplication factor up to 16 times on 9 basic resolutions).
7 Type of output
b Incremental encoders
8
500 mm 5 V output driver, RS-422, 4.7530 V.
// output Push-pull output driver, 530 V, 1130 V.
Deserialization
SSI output connecting cable b Single-turn absolute encoders (depending on model)
Push-pull output driver, 1130 V, binary code or Gray code.
SSI output without parity, 13-bit clock, 1130 V, binary code or Gray code.
9
b Multi-turn absolute encoders (depending on model)
Encoders XCC35 or 39 SSI output without parity, 25-bit clock, 1130 V, binary code or Gray code.
// output
Connector kit
x meters 500 mm
b Parallel outputs obtainable using converter connecting cables
The SSI versions can be converted to a parallel version by using the
SSI output deserialization connecting cable (see page 34).
Cable Deserialization b Multi-turn absolute encoders, communicating version, fieldbus:

8 conductors connecting cable v CANopen: 1130 V (see page 42).
v Profibus-DP: 1130 V (see page 46).
10
Encoders XCC35 or 39
9
Recommendations OsiSense XCC
Specifications required to define an encoder
Installation considerations Type of cables

In an environment subject to considerable electrical interference, we recommend
1 using cables with several twisted pairs, reinforced by general shielding.
For the signals, we recommend using standard 0.14mm2/0.22mm2 conductors.
For 5V supply encoders.

Due to line voltage drops, we recommend that the 0V and +V supply cables have
the following minimum cross-sectional areas:
2 b 0.14 mm2 (26 AWG) if the encoder-supply distance is less than 30m,
b 0.22 mm2 (24 AWG) if the encoder-supply distance is greater than 30m.
Cabling
Separate as much as possible the connecting cables to encoders and power cables.
3
Also avoid parallel cable runs. Maintain a distance of at least 20cm and, in the event
of cables crossing, ensure that the crossovers are at right-angles.
When using cables with twisted pairs (shielded or nonshielded) group the signal
cables in common pairs.
In environments subject to electrical interference, we recommend grounding the

encoder base using one of the mounting screws.
4 Connect the control inputs to a potential (absolute encoder).
Connect all 0V connections back to a star point, i.e. only one and same referential.
Ground the shielding throughout 360 using tap-off braids at both ends of each
cable. To ground the shielding use cable of at least 4mm2.
As much as possible, ground the 0V of the supply to the encoders on the supply
side.
5 Maximum frequency of signals for SSI depending on distance:
Indicative values that can vary depending on the cable specifications.
Distance (m) Frequency (kHz)
50 400
100 300
6
200 200
400 100
Supply
It is imperative to use only regulated and smoothed power supplies (with a ripple
factor of 500 mV @ 24 V, and 200 mV @ 5 V) that are specifically for the encoder.
The Schneider Electric ABL7 range power supplies are available for this purpose.
7 Refer to the catalog, Power supplies, splitter boxes and interfaces.
For 530V encoders, the supply via a transformer with a 24Vrms rectified and
smoothed secondary is prohibited, since the DC voltage obtained is higher than the
supply voltage limits of the encoder.
Prior to power-up for the first time, ensure that the rated supply voltage of the
encoder is suitable for the supply.
10
10
Recommendations OsiSense XCC
Specifications required to define an encoder,

installation, power-up
Connection and power-up Connection

considerations It is necessary to disconnect the supply before plugging in or unplugging a connector
version encoder. 1
Encoder supplied by central unit:
b disconnect supply to central unit,
b proceed with connection or disconnection,
b re-establish supply to central unit.
Encoder supplied by source external to central unit:
b disconnect supply to central unit, then disconnect supply to encoder,
b proceed with connection or disconnection,
2
b re-establish supply to encoder, then re-establish supply to central unit.
Power-up
For synchronization reasons, the power-up or switching-off of the encoder must
coincide with that of its associated electronics.
3
10
11
Specifications, OsiSense XCC
Wiring Diagrams Incremental encoders 0
40 mm encoders
Environment
Encoder type XCC1406Ppppp XCC1406Tpppp
1 Conformity
Temperature Operation (housing) C (F)
e
20 to +80 (4 to +176)
Storage C (F) 30 to +85 (22 to +185)
Degree of protection Conforming to IEC 60529 IP 54 IP 52
Vibration resistance Conforming to IEC 60068-2-6 10 gn (10500 Hz)
Shock resistance Conforming to IEC 60068-2-27 30 gn, duration 11 ms
Resistance to Electrostatic discharges Conforming to IEC 61000-4-2: level 3, 8 kV air; 4 kV contact
2 electromagnetic
interference
Radiated electromagnetic fields
(electromagnetic waves)
Conforming to IEC 61000-4-3: level 3, 10 V/m
Fast transients Conforming to IEC 61000-4-4: level 3, 2kV (1 kV for inputs/outputs)

(Start/Stop interference)
Surge withstand Conforming to IEC 61000-4-5: level 2, 1 kV
Materials Base Aluminum or Zamak
Housing Aluminum or Zamak
3 Shaft
Ball bearings
Stainless steel or Aluminum
688AZZ1
Mechanical specifications
Shaft type mm 6, solid shaft (g7) 6, through-shaft (H7)
Maximum rotational speed Continuous 9000 rpm
gcm2
4
Shaft moment of inertia 10 (0.14 oz-in) 5 (0.07 oz-in)
Torque Ncm 0.2 (0.28 oz-in) 0.25 (0.35 oz-in)
Maximum load Radial N 20
Axial N 10
Electrical specifications
Connection Radial: pre-cabled, 8 x 0.14 mm2 shielded, Pre-cabled 8 x 0.14 mm2 shielded,
5
ext = 6 mm, length = 2 m ext = 6 mm, length = 2 m
Crimped metal cable entry Crimped metal cable entry
Frequency kHz 100
Number of channels 3 channels: A, B, top 0 and complements A, B, 0
Encoders with type R output stage: 5 V output driver, RS-422, 4.55.5 V supply
Supply voltage c 5 V 10%
Max. ripple: 200 mV
6 Current consumption, no-load
Output current
mA
mA
100 max.
40 max.
Output levels Low level (Is = 20 mA) 0.5 V max.
High level (Is = 20 mA) 2.5 V min.
Encoders with type K output stage: push-pull output driver, 1130 V supply
7 Supply voltage c 1130 V

Max. ripple: 500 mV
Current consumption, no-load mA 75 max.
Protection Against short-circuits and reverse polarity
Output current mA 40 max.
8 High level (Is = 20 mA) V supply 3 V min.
Wiring diagrams
Type R output stage Type K output stage
Encoder Processing Processing
Encoder
Supply 5 V Supply 11 V/30 V
9 AB0
RS422 Is
max.
100
AB0
Push-Pull Is
max.
AB0 AB0
0V 0V 0V 0V
10
12
Catalog Numbers OsiSense XCC
40 mm encoders
Solid shaft, 6 mm
105160
Resolution Connection Output stage Supply voltage Catalog number Weight
100 ppr
method
Pre-cabled,
type (1)
5 V, RS-422 4.55.5 V XCC1406PR01R
kg (lb)
0.355 (0.787)
1
radial
2m Push-pull 1130 V XCC1406PR01K 0.355 (0.787)
360 ppr Pre-cabled, 5 V, RS-422 4.55.5 V XCC1406PR03R 0.355 (0.787)

radial
2m
2
Push-pull 1130 V XCC1406PR03K 0.355 (0.787)
XCC1406PRppp
radial

radial
3
radial
Through-shaft, 6 mm (2)
Resolution Connection Output stage Supply voltage Catalog number Weight
4
105161
method type (1) kg (lb)

100 ppr Pre-cabled, 5 V, RS-422 4.55.5 V XCC1406TR01R 0.405 (0.893)
radial
2m Push-pull 1130 V XCC1406TR01K 0.405 (0.893)

radial
2m Push-pull 1130 V XCC1406TR03K 0.405 (0.893) 5
XCC1406TRppp
radial

radial
2m Push-pull 1130 V XCC1406TR10K 0.405 (0.893) 6
radial
(1) For specifications of the output stage type (indicated by last letter of the catalog number). See page12.
(2) Anti-rotation device included with encoder.
7
10
13
58 mm encoders
Environment
Encoder type XCC1506Ppppp XCC1510Ppppp XCC1510Spppp XCC1514Tpppp
1 Conformity
e
30 to +100 (22 to +212),
except XCCTSMppX and XCCTSMppY: 30 to +70 (22 to +158)
Storage C (F) 30 to +85 (22 to +185)
except XCC1510Spppp: 40 to +100 (40 to +212)
Degree of protection Conforming to IEC 60529 IP 65 IP65 (IP 67 with collar IP69K IP65
option XCCRB3)
2 Vibration resistance
Shock resistance
Conforming to IEC 60068-2-6
Conforming to IEC 60068-2-27
10 gn (552000 Hz)
50 gn, duration 6 ms
Resistance to Electrostatic discharges Conforming to IEC 61000-4-2: level 3, 8 kV air, 4 kV contact
electromagnetic Radiated electromagnetic fields Conforming to IEC 61000-4-3: level 3, 10 V/m
interference (electromagnetic waves)
3 Materials
Surge withstand
Base
Conforming to IEC 61000-4-5: level 2, 1 kV
Aluminum Stainless steel 316L Aluminum
Housing Zamak Stainless steel 316L Zamak
Shaft Stainless steel 303 Stainless steel 316L Stainless steel 303
Ball bearings 6000 6000 with teflon 6803ZZ
sealing ring
4 Shaft type 6, solid shaft
(g7)
10 mm, solid shaft 10 mm, solid shaft 14, through-shaft
(H7)
Maximum rotational speed Continuous 9000 rpm 9000 rpm 3000 rpm 6000 rpm
Shaft moment of inertia gcm2 10 (0.14 oz-in) 10 (0.14 oz-in) 12 (0.17 oz-in) 22 (0.31 oz-in)
Torque Ncm 0.4 (0.57 oz-in) 0.4 (0.57 oz-in) 9 (12.7 oz-in) 0.6 (0.85 oz-in)
Maximum load Radial N 100 100 250 50
Axial N 50 50 500 20
5 Electrical specifications
Connection Connector M23, 12-pin male connector (2 m PUR cable for XCC1510Spppp)
Frequency kHz 300
Number of channels 3 channels: A, B, top 0 and complements A, B, 0
Encoders with type X output stage: 5 V output driver, RS-422, 4.7530 V supply
6 Supply voltage c 4.7530 V

Max. ripple: 500 mV
Protection Against short circuits and reverse polarity
7 High level (Is = 20 mA) 4.5 V min.
Encoders with type Y output stage: push-pull output driver, 530 V supply
Supply voltage c 530 V
Max. ripple: 500 mV
8
(for U supply = 30 V) (1)
High level (Is = 20 mA) V supply 2.5 V min.
Wiring diagrams
Type X output stage Type Y output stage
9 Encoder
+5V
Processing
Supply 4.75 V/30 V
Supply 5 V
Encoder Processing
Supply 5 V/30 V
AB0 AB0
Is (1) Is
RS422 100 Push-Pull
max. max.
AB0 AB0
10
0V 0V 0V 0V
(1) RS-422 compatible on 5 V supply.
14
58 mm encoders aluminum and stainless steel version
Solid shaft, 6 mm
Resolution Connection Output stage Supply Catalog Number Weight
100 ppr
method(1)
Connector,
type (2) voltage
5 V, RS-422 4.7530 V XCC1506PS01X
kg (lb)
0.495 (1.091)
1
105163
radial
M23 male Push-pull 530 V XCC1506PS01Y 0.495 (1.091)
360 ppr Connector, 5 V, RS-422 4.7530 V XCC1506PS03X 0.495 (1.091)

radial
M23 male
2
Push-pull 530 V XCC1506PS03Y 0.495 (1.091)
XCC1506PSppp
radial

radial
3
radial

radial
M23 male Push-pull 530 V XCC1506PS25Y 0.495 (1.091) 4
radial
Solid shaft, 10 mm
5
method(1) type (2) voltage kg (lb)
radial
XCC1510SPAppp M23 male Push-pull 530 V XCC1510PS01Y 0.465 (1.025)
360 ppr Connector,

radial
M23 male
5 V, RS-422 4.7530 V XCC1510PS03X 0.465 (1.025)
6
Push-pull 530 V XCC1510PS03Y 0.465 (1.025)
Cable 2m Push-pull 530 V XCC1510SPA03Y (3) 0.600 (1.300)

radial
7
radial
8
radial

105164

radial
5000 ppr Connector, 5 V, RS-422 4.7530 V XCC1510PS50X 0.465 (1.025) 9

radial
XCC1510PSppp M23 male Push-pull 530 V XCC1510PS50Y 0.465 (1.025)
10
(1) For female connector use XZCC23FDP120S or pre-wired connectors (2, 5, or 10 m). See page 35.
(3) Stainless steel 316L version
15
Catalog Numbers (continued) OsiSense XCC
Incremental encoders 0
58 mm encoders
1 100 ppr
method(2)
Connector,
type (3) voltage
5 V, RS-422 4.7530 V XCC1514TS01X
kg (lb)
0.435 (0.959)
105166
radial
M23 male Push-pull 530 V XCC1514TS01Y 0.435 (0.959)
360 ppr Connector, 5 V, RS-422 4.7530 V XCC1514TS03X 0.435 (0.959)

radial
M23 male
2
Push-pull 530 V XCC1514TS03Y 0.435 (0.959)

XCC1514TSppp radial

radial
3 M23 male Push-pull 530 V XCC1514TS10Y 0.435 (0.959)

radial

radial
4 M23 male Push-pull 530 V XCC1514TS25Y 0.435 (0.959)

radial
5 Reduction collars for encoders with through-shaft, 14 mm

For use with Diameter Catalog Number Weight
mm kg (lb)
Encoders with through-shaft 6 XCCR158RDA06 0.015 (0.033)
566465
XCC1514TSppp
8 XCCR158RDA08 0.010 (0.022)
6 10 XCCR158RDA10 0.010 (0.022)
12 XCCR158RDA12 0.010 (0.022)

XCCR158RDApp (3) For specifications of the output stage type (indicated by last letter of the catalog number). See page14.
10
16
58 mm encoders
Parameterable versions (1)
Parameterable with solid shaft, 10 mm

105184
2564096 ppr
method(2)
Connector, radial
type (3) voltage
5 V, RS-422 4.7530 V XCC1510PSM02X
kg (lb)
0.465 (1.025)
1
M23
male Push-pull 530 V XCC1510PSM02Y 0.465 (1.025)
3605760 ppr Connector, radial 5 V, RS-422 4.7530 V XCC1510PSM03X 0.465 (1.025)

M23
male
2
Push-pull 530 V XCC1510PSM03Y 0.465 (1.025)
XCC1510PSM02X 5008000 ppr Connector, radial 5 V, RS-422 4.7530 V XCC1510PSM05X 0.465 (1.025)
M23
102416,384 Connector, radial 5 V, RS-422 4.7530 V XCC1510PSM11X 0.465 (1.025)

ppr M23
3
500080,000 Connector, radial 5 V, RS-422 4.7530 V XCC1510PSM50X 0.465 (1.025)
ppr M23
Parameterable with through-shaft, 14 mm (4)

Resolution Connection Output stage Supply Catalog Number Weight 4
2564096 ppr Connector, radial 5 V, RS-422 4.7530 V XCC1514TSM02X 0.435 (0.959)
M23
male Push-pull 530 V XCC1514TSM02Y 0.435 (0.959)

M23
5
M23
102416,384
ppr
Connector, radial 5 V, RS-422
M23
male
4.7530 V XCC1514TSM11X 0.435 (0.959)
6
Push-pull 530 V XCC1514TSM11Y 0.435 (0.959)
500080,000 Connector, radial 5 V, RS-422 4.7530 V XCC1514TSM50X 0.435 (0.959)

ppr M23
Reduction collars for parameterable encoders with through-shaft,

7
14 mm
mm kg (lb)
566465
XCC1514TSMppp
8 XCCR158RDA08 0.010 (0.022) 8
10 XCCR158RDA10 0.010 (0.022)
12 XCCR158RDA12 0.010 (0.022)
(1) Parameter configuration: refer to table indicating position of DIP switches on page17.
XCCR158RDApp
9
10
17
90 mm encoders
Environment
Encoder type XCC1912Ppppp XCC1930Tpppp
1 Conformity
e
20 to +80 (4 to +176)
Storage C (F) 30 to +85 (22 to +185)
Degree of protection Conforming to IEC 60529 IP66 IP65
Vibration resistance Conforming to IEC 60068-2-6 10 gn (101 kHz)
2 electromagnetic
interference

Materials Base Aluminum
Housing Zamak
3 Shaft
Ball bearings
Stainless steel
6001ZZ 6807
Shaft type 12, solid shaft (g6) 30, through-shaft (H7)
Maximum rotational speed Continuous 6000 rpm 3600 rpm
gcm2
4
Shaft moment of inertia 150 (2.08 oz-in) 500 (6.94 oz-in)
Torque Ncm 1 (1.42 oz-in) 2.5 (2.5 oz-in)
Maximum load Radial N 200 80
Axial N 100 50
Connection Connector M23, 12-pin male connector
5 Frequency
Number of channels
kHz 100
3 channels: A, B, top 0 and complements A, B, 0
Encoders with type R (N) output stage: 5 V output driver, RS-422, 4.55.5 V supply
Supply voltage c 5 V 10%
Max. ripple: 200 mV
6
Encoders with type K (N) output stage: push-pull output driver, 1130 V supply
Max. ripple: 500 mV
7 Current consumption, no-load
Protection
mA 75 max.
Against short-circuits and reverse polarity
High level (Is = 20 mA) V supply 3 V min.
8 Wiring diagrams
Type R (N) output stage Type K (N) output stage
Encoder Processing Encoder Processing
Supply 5 V Supply 11 V/30 V
AB0 AB0
Is Is
9
RS422 100 Push-Pull
max. max.
AB0 AB0
0V 0V 0V 0V
10
18
90 mm encoders
Solid shaft, 12 mm
100 ppr
method (1)
Connector, radial
type (2)
5 V, RS-422
voltage
4.55.5 V XCC1912PS01RN
kg (lb)
1.360 (3.000)
1
105168
M23 male Push-pull 1130 V XCC1912PS01KN 1.360 (3.000)
360 ppr Connector, radial 5 V, RS-422 4.55.5 V XCC1912PS03RN 1.360 (3.000)

500 ppr Connector, radial 5 V, RS-422

M23 male Push-pull
4.55.5 V
1130 V
XCC1912PS05RN
XCC1912PS05KN
1.360 (3.000)
1.360 (3.000) 2
XCC1912PSpppN

M23 male
3
Push-pull 1130 V XCC1912PS11KN 1.360 (3.000)



M23 male Push-pull
4.55.5 V
1130 V
XCC1912PS50RN
XCC1912PS50KN
1.360 (3.000)
1.360 (3.000)
4
10,000 ppr Connector, radial 5 V, RS-422 4.55.5 V XCC1912PS00RN 1.360 (3.000)
105171
Resolution Connection
method(1)
Output stage
type (2)
Supply
voltage
Catalog Number
kg
Weight
(lb)
5
100 ppr Connector, radial 5 V, RS-422 4.55.5 V XCC1930TS01RN 0.960 (2.116)
M23 male Push-pull 1130 V XCC1930TS01KN 0.960 (2.116)


6
XCC1930TSpppN


M23 male Push-pull
4.55.5 V
1130 V
XCC1930TS11RN
XCC1930TS11KN
0.960 (2.116)
0.960 (2.116) 7

M23 male
8
Push-pull 1130 V XCC1930TS36KN 0.960 (2.116)

10,000 ppr Connector, radial 5 V, RS-422 4.55.5 V XCC1930TS00RN 0.960 (2.116)

523200
Reduction collars for encoders with through-shaft, 30 mm

9
mm kg (lb)
Encoders with through-shaft 12 XCCR290RDP12 0.060 (0.132)
XCC1930TSppppN 16 XCCR290RDP16 0.060 (0.132)
20 XCCR290RDP20 0.030 (0.066)
25 XCCR290RDP25 0.025 (0.055)
XCCR290RDPppN
10
19
Dimensions OsiSense XCC
Incremental encoders 3
40 mm, 58 mm and 90 mm encoders
40 mm encoders
XCC1406PRpppN XCC1406TRpppN
1 (3)
5
(4)
3 3
(1) (2) 20 (1)
10
3.2
46
10
27
8
36f7
40
40
40
22
2 9 6g7
4
(2)
5.5 8 1.5 52 (3)
25 4 3H8
20f7 35
(1) 3 holes M3 x 0.45 at 120 on 28 PCD, depth: 6 mm. (1) 2 M4 holes at 120 for cross-headed screws on 30 PCD, depth: 6 mm.
(2) 3 holes M3 x 0.45 at 120 on 24 PCD, depth: 6 mm. (2) Through-shaft, 6 (H7).
(3) 6 cable, length 2 m, minimum bend radius: 30 mm. (3) 2 M2 x 3 flat cross-headed locking screws.
3
(4) 6 cable, length 2 m, minimum bend radius: 30 mm.
58 mm encoders
XCC1506PSppX, XCC1506PSppY XCC1510PSppX, 1510PSppY / XCC1510PSMppX, 1510PSMppY
M23 25 M23 25
Nitrile seal Nitrile seal
-0.010
10 -0.025
4 2 8 19
4 (1)
54
54
10.5 9.5
5.5
31.75f9
58.5
50h7
58
10 15
6g7
(2) (3)
5 (1) 36.5 10 (2) 36f7 36.5 10
(1) 3 holes M3 x 4 at 120 on 42 PCD, depth: 10 mm. (1) 3 M4 holes at 120 on 48 PCD, depth: 8 mm.
(2) Collar XCCRB1 mounted. (2) 3 M3 holes at 120 on 48 PCD, depth: 8 mm.
(3) Blanking plug, for encoders XCC1510PSMppX and1510PSMppY only.
XCC1514TSppX, 1514TSppY / XCC1514TSMppX, 1514TSMppY
M23 25
6 36
81
Nitrile seal
18 64
(1) 24
52
58.5
(1) Through-shaft, 14 (H7).

(2) Flexible mounting kit, 1 x XCCRF5N
7
(3)
mounted.
48 (4) (3) 2 HC M4 x 4 locking screws.
(4) Hole for M3 x 6 self-threading screw.
(5) (5) (5) Blanking plug, for encoders
40 (2) 3.2
XCC1514TSMppX and 1514TSMppY
88 45 only.
XCC1510SPA03Y, XCC1510SPA11Y, XCC1510SPA50Y
8 81
10 g6
52 10
(3)
(1)
(2)
48
36 f7
59
24
18
9 15 (1) 3 holes M4 x 3 at 120 on 48

PCD, depth: 8 mm
(2) Shaft side protection IP69K
(3) 6 cable, length 2 m, minimum
9 .5 19
bend radius: 30 mm.
21 .5
10
20
Dimensions (continued), OsiSense XCC
Connections Incremental encoders
40 mm, 58 mm and 90 mm encoders
90 mm encoders
XCC1912PSpppN XCC1930TSpppN
110
7
1
5 5 5
30 (4)
71.5
14
72
14
12g6
5.5
80h7
2
(2)
58
90
90
25 (3)
30
(1)
(1) 10
9,5 78 100 51
40h7 72
(1) 6 holes M6 x 1 at 120 on 60 PCD, max. depth: 12 mm. (1) Through-shaft, 30 (H7).
(2) Anti-rotation device, 1 x XCCRF9N, mounted.
3
(3) 4 M5 x 6 on 78 PCD.
(4) 1 CHC M5 x 12 stainless steel A2 locking screw.
Pre-cabled version encoders (1)

8 x 0.14 mm2 shielded cable connections for 40 encoders
Wire color
Signal Supply
BN
A
RD
+V
VT
0
BU
0
YE
B
OG
B
GN
A
BK
0V
4
BN = Brown BU = Blue GN = Green
RD = Red YE = Yellow BK = Black
VT = Violet OG = Orange
Note: In environments subject to electrical interference, we recommend grounding the encoder
base using one of the mounting screws.
Connector version encoders (1) 5

M23, 12-pin connector connections
Male connector on encoder (pin view)
Pin number 1 2 3 4 5 6 7 8 9 10 11 12
9
1 8
6
Signal A +V 0 0 B B R A R 0V 0V +V
2 7
10 12 Supply
3 11 6
4 5 Note: In environments subject to electrical interference, we recommend grounding the encoder
base using one of the mounting screws.
R = reserved. Do not connect.
(1) Connect each unused channel to 0 V in series with a 10 kW resistor.
Resolutions 7
Resolutions for parameterable 58 mm encoders XCC1510PSMppp and XCC1514TSMppp
Simple multiplication of the basic resolution of the disc using DIP switches (1)
(Plastic 2.5 screwdriver recommended.)
The factory setting is for factor X1.
on
Interpolation factor
Counting Speed
Basic resolution
256 360 500 1024 5000
Position of DIP switches
1 2 3 4 8
x1 x1 256 360 500 1024 5000
x2 x2 512 720 1000 2048 10,000
x3 x3 768 1080 1500 3072 15,000

1 2 3 4
x4 x4 1024 1440 2000 4096 20,000
x5 1280 1800 2500 5120 25,000 9

x8 2048 2880 4000 8192 40,000
x 10 2560 3600 5000 10,240 50,000
x 12 3072 4320 6000 12,288 60,000
10
x 16 4096 5760 8000 16,384 80,000
(1) Setting the switches to other configurations will result in the encoder providing an unpredictable
resolution.
21
Wiring Diagrams Single turn absolute encoders 0
58 mm encoders
Environment
Encoder type XCC2506Pppppp XCC2510Pppppp XCC2510Sppppp XCC2514Tppppp
1 Conformity
Temperature Operation (housing)
e
C (F) 20 to +90 (4 to +194)
Storage C (F) 30 to +95 ( 22 to +203) except XCC2510Sppppp: 40 to +100 (40 to +212)
Degree of protection Conforming to IEC 60529 IP65 IP 65 (IP 67 with collar IP 69K IP65
option XCCRB3)
2 Resistance to
electromagnetic
Electrostatic discharges
Radiated electromagnetic
Conforming to IEC 61000-4-2: level 3, 8 kV air; 4 kV contact
interference fields (electromagnetic waves)
Materials Base Aluminum Stainless steel 316L Aluminum
3 Housing
Shaft
Zamak
Stainless steel 303
Stainless steel 316L Zamak
Stainless steel 316L Stainless steel 303
sealing ring
Shaft type 6, solid shaft (g7) 10 mm, solid shaft 10 mm, solid shaft 14, through-shaft
(H7)
4 Maximum rotational speed Continuous

Shaft moment of inertia gcm2
9000 rpm
10 (0.14 oz-in)
9000 rpm
10 (0.14 oz-in)
9000 rpm
12 (0.17 oz-in)
6000 rpm
22 (0.31 oz-in)
Torque Ncm 0.4 (0.57 oz-in) 0.4 (0.57 oz-in) 9 (12.7 oz-in) 0.6 (0.85 oz-in)
Maximum load Radial N 100 100 25 50
Axial N 50 50 50 20
5 Connection Connector Encoders with parallel output stage types KG (N), KB:
M23, 16-pin male connector / 2 m PUR cable for XCC2510Sppppp
Encoders with SSI output stage types SB (N), SG (N):
M23, 12-pin male connector / 3 m PUR cable for XCC2510Sppppp
Frequency kHz Encoders with parallel output stage types KG (N), KB:
100 kHz on LSB (least significant bit)
100 kHz to 1 MHz clock
6 Encoders with type KB and KG (N) output stage: push-pull output driver, 1130 V supply, Gray code
Max. ripple: 500 mV
7 (for U supply = 30V)
Wiring diagrams
Type KB and KG (N) output stage KB and KG (N) Direction input
8 1130 V
< 1 ms < 1 ms
V supply
Direction input
Output 0V
Direction of
counting Counter- Clockwise Counter-
9
clockwise clockwise
10
22
Specifications (continued), OsiSense XCC
Wiring Diagrams (continued), Single turn absolute encoders
Catalog Numbers 58 mm encoders
Electrical specifications (continued)

Encoders with type SB (N) or SG (N) output stage: SSI output without parity, 13-bit clock, 1130 V supply, binary code (SB) or Gray code (SG)
Supply voltage
Current consumption, no-load mA
c 1130V. Max. ripple: 500 mV
100
1
Protection Against short circuits and reverse polarity
Output level Idata = 20 mA |VOD| > 2 V
Wiring diagrams
RS-422 data output Isolated clock input Direction input
DATA + CLK +
Iclk
V supply
< 1 ms < 1 ms
2
2.2 nF Direction input
0V
1 nF
VOD VID
Direction of
1 nF Clockwise Counter- Clockwise
counting
clockwise
3
2.2 nF
DATA CLK -
Idata = 20 mA |VOD| > 2 V |VID| max.: 5 V

|Iclk| max.: 15 mA
Catalog numbers
Resolution Connection Output stage Supply Catalog number Weight
method (1) type (2) voltage
4
kg (lb)
Solid shaft, 6 mm
105173
8192 ppr Connector, Push-pull, 1130 V XCC2506PS81KB 0.495 (1.091)

radial binary
M23 male Push-pull, 1130 V XCC2506PS81KGN 0.495 (1.091)
Gray
SSI, 13-bit, 1130 V XCC2506PS81SBN 0.490 (1.080)
binary
XCC2506PS81ppp
SSI, 13-bit,
Gray
1130 V XCC2506PS81SGN 0.490 (1.080)
5
Solid shaft, 10 mm
8192 ppr Connector, Push-pull, 1130 V XCC2510PS81KB 0.465 (1.025)
radial binary
M23 male Push-pull, 1130 V XCC2510PS81KGN 0.465 (1.025)
Gray
SSI, 13-bit,
binary
1130 V XCC2510PS81SBN 0.460 (1.014)
6
SSI, 13-bit, 1130 V XCC2510PS81SGN 0.460 (1.014)
Gray
8192 ppr Connector, Push-pull, 1130 V XCC2514TS81KB 0.435 (0.959)
radial binary
M23 male
7
Push-pull, 1130 V XCC2514TS81KG 0.435 (0.959)
Gray
SSI, 13-bit, 1130 V XCC2514TS81SB 0.430 (0.948)
XCC2510SPAppppp binary
SSI, 13-bit, 1130 V XCC2514TS81SG 0.430 (0.948)
Gray
Cable 2 m Push Pull, 1130 V XCC2510SPA81KGN 0.600 (1.323)
Gray (4)
SSI, 13-bit,
Gray
1130 V XCC2510SPA81SGN
(4)
0.600 (1.323)
8
mm kg (lb)
566465
XCC2514TS81pp
9
8 XCCR158RDA08 0.010 (0.022)
10 XCCR158RDA10 0.010 (0.022)
12 XCCR158RDA12 0.010 (0.022)
(1) For female connector use:

- XZCC23FDP120S for encoders type SB (N) and SG (N)
10
XCCR158RDApp - XZCC23FDP160S for encoders type KB and KG (N),
or pre-wired connectors (2, 5 and 10 m). See page 35.
(2) For specifications of the output stage type (indicated by last letter of the catalog number). See pages
22 and 23.
(4) Stainless steel 316L version.
23
Wiring Diagrams Single turn absolute encoders 0
90 mm encoders
Environment
Encoder type XCC2912Pppppp XCC2930Tppppp
1 Conformity
e
20 to +85 (4 to +185)
Storage C (F) 40 to +85 (40 to +185)
2 electromagnetic
interference Radiated electromagnetic fields Conforming to IEC 61000-4-3: level 3, 10 V/m
3 Housing
Shaft
Zamak
Stainless steel
Ball bearings 6001ZZ 6807
4 Shaft moment of inertia
Torque
gcm2
Ncm
150 (2.08 oz-in)
1 (1.42 oz-in)
500 (6.94 oz-in)
2.5 (3.54 oz-in)
Maximum load Radial N 200 80
Axial N 100 50
5
Connection Connector Encoders with parallel output stage types KB (N), KG (N):
M23, 16-pin male connector.
M23, 12-pin male connector
Frequency Encoders with parallel output stage types KB (N), KG (N):
100 kHz on LSB (least significant bit)
100 kHz to 1 MHz clock
6
Encoders with type KB (N) or KG (N) output stage: push-pull output driver, 1130 V supply, binary code KB (N) or Gray code KG (N)
Supply voltage c 1130V. Max. ripple: 500 mV
(for U supply = 30V)
7
High level (Is = 20 mA) V supply 3 V min.
Wiring diagrams
Type KB (N) and KG (N) output stage KB (N) and KG (N) Direction input
1130 V < 1 ms < 1 ms
V supply
8 Output
Direction input
0V
Direction of Counter- Counter-

counting Clockwise
clockwise clockwise
10
24
Specifications (continued), OsiSense XCC
Wiring Diagrams (continued), Single turn absolute encoders
Catalog Numbers 90 mm encoders
Electrical specifications (continued)

Encoders with type SB (N) or SG (N) output stage: SSI output without parity, 13-bit clock, 1130 V supply, binary code SB (N) or Gray code SG (N)
Supply voltage c 1130V
Max. ripple: 500 mV
1
Current consumption, no-load mA 100
Wiring diagrams
2
RS-422 data output Isolated clock input Direction input
< 1 ms < 1 ms
Iclk
DATA + CLK + V supply
2.2 nF Direction input
VOD VID
1 nF
0V
3
Direction of
1 nF counting Clockwise Counter- Clockwise
clockwise
2.2 nF
DATA CLK -
4
|Iclk| max.: 15 mA
Catalog numbers
method (1) type (2) voltage kg (lb)
Solid shaft, 12 mm
105168
8192 ppr Connector,

radial
M23 male
Push-pull,
binary
1130 V XCC2912PS81KBN 1.365 (3.001)
5
Push-pull, 1130 V XCC2912PS81KGN 1.365 (3.001)
Gray

binary
XCC2912PSpppp
SSI, 13-bit, 1130 V XCC2912PS81SGN 1.370 (3.020) 6
Gray
8192 ppr Connector, Push-pull, 1130 V XCC2930TS81KBN 0.975 (2.150)
105171
radial binary
M23 male
Push-pull,
Gray
1130 V XCC2930TS81KGN 0.975 (2.150) 7
SSI, 13-bit, 1130 V XCC2930TS81SBN 0.980 (2.161)
binary
SSI, 13-bit, 1130 V XCC2930TS81SGN 0.980 2.161)

Gray
XCC2930TSpppp Reduction collars for encoders with through-shaft, 30 mm

8
mm kg (lb)
Encoders with through-shaft 12 XCCR290RDP12 0.060 (0.132)
523200
XCC2930TS81ppp
16 XCCR290RDP16 0.060 (0.132)
20 XCCR290RDP20 0.030 (0.066)

9
25 XCCR290RDP25 0.020 (0.044)
(1) For female connector use:

- XZCC23FDP120S for encoders type SB (N) and SG (N)
XCCR290RDPpp - XZCC23FDP160S for encoders type KB (N) and KG (N),
or pre-wired connectors (2, 5 and 10 m). See page 35.
(2) For specifications of the output stage type (indicated by last letter of the catalog number).
10
See pages 24 and 25.
25
Single turn absolute encoders 3
58 mm and 90 mm encoders
58 mm encoders
XCC2506PS81KB, XCC2506PS81KGN, XCC2514TS81KB, XCC2514TS81KGN, XCC2514TS81SB,
1 XCC2506PS81SBN, XCC2506PS81SGN XCC2514TS81SG
M23 25 M23 25
Nitrile seal
Nitrile seal
36
81
60 4 (2) 18
(1) 64 24
52
54
10.5
5.5
58.5
50h7
58
(3)
6g7
10
48 (4)
(1) 36.5 10 40 (2) 3.2
3 88 45
(1) 3 M4 holes at 120 on 42 PCD, depth: 10 mm. (1) Through-shaft, 14 (H7).

(2) Collar XCCRB1 mounted. (2) Flexible mounting kit, 1 x XCCRF5N mounted.
(3) 2 HC M4 x 4 locking screws.
4 XCC2510PS81KB, XCC2510PS81KGN,
XCC2510PS81SBN, XCC2510PS81SGN
XCC2510SPA81KGN, XCC2510SPA81SGN
81
10 g6
M23 25
52 10
Nitrile seal (3) (3
-0.010
10 -0.025
2 8 19 (1)
(1) 60
5 (2)
54
48
36 f7
59
9.5
31.75f9
58.5
15
15
(2) 9 .5 19
21 .5
6 36f7 36.5 10
(1) 3 M4 holes at 120 on 48 PCD, depth: 8 mm. (1) 3 holes M4 x 3 at 120 on 48 PCD, depth: 8 mm
(2) 3 M3 holes at 120 on 48 PCD, depth: 8 mm. (2) Shaft side protection IP69K
(3) XCCpppKGN: 6 x 2 m, minimum bend radius: 30 mm, PUR.
XCCpppSGN: 9 x 2 m, minimum bend radius: 30 mm, PUR.
90 mm encoders
7 XCC2912PS81KBN, XCC2912PS81KGN XCC2930TS81SBN, XCC2930TS81SGN
14 13
110
5 5 5 7
(1)
30 (4)
8
72
66
12g6
5.5
4
80h7
(2)
90
58
90
25 (3)
30
9
(1) 10.5
9.5 78 72
100
40h7
(1) 6 holes M6 x 1 at 120 on 60 PCD, depth: 12 mm max. (1) Through-shaft, 30 (H7).
(3) 4 M5 x 6 on 78 PCD.
(4) 1 CHC M5 x 12 stainless steel A2 locking screw.
10
26
Connections OsiSense XCC
Single turn absolute encoders
Connector version encoders

Encoders type KB (N) and KG (N)
M23, 16-pin connector, counterclockwise connections
1
16b
1 11
2 12
2
10
3 13 16 9
4 14 15 8
5 7
6
3
Pin number 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
Signal/Supply 0V +V d0 d1 d2 d3 d4 d5 d6 d7 d8 d9 d10 d11 d12 Direction

If a resolution less than 13 bits (8192 ppr) is required, (1)
only the corresponding number of bits need to be connected:
Example:
- D5 to D12 for 8 bits (256 ppr)
(1) : Clockwise direction, 16 to + V.

4
: Counterclockwise direction, 16 to 0 V.
Encoders type SB (N) and SG (N)

12b
5
9
1 8
2 7
10 12
6
3 11 6
4 5
Pin number 1 2 3 4 5 6 7 8 9 10 11 12
Signal/Supply 0V Data + Clk + R Direction R

(1)
R +V R Data Clk R
7
R = Reserved (do not connect).
(1) : Clockwise direction, 5 to 0 V.
: Counterclockwise direction, 5 to + V.
10
27
Wiring Diagrams Multi-turn absolute encoders 0
58 mm encoders
Environment
Encoder type Multi-turn absolute XCC3506Pppppp XCC3510Pppppp XCC3510Spppp XCC3514Tppppp
1 Conformity
e
C (F) 20 to +85 (4 to +185)
Storage C (F) 20 to +85 (4 to +185)
Degree of protection Conforming to IEC 60529 IP65 IP 65 (IP 67 with collar IP 69K IP65
option XCCRB3)
2 Resistance to
electromagnetic
Electrostatic discharges
Radiated electromagnetic
Conforming to IEC 61000-4-2: level 3, 8 kV air; 4 kV contact
interference fields (electromagnetic waves)
Materials Base Aluminum Stainless steel 316L Aluminum
3 Housing
Shaft
Steel
Stainless steel 303
Stainless steel 316L
Stainless steel 316L
Steel
Stainless steel 303
sealing ring
Shaft type 6, solid shaft (g7) 10 mm, solid shaft 14, through-shaft
(H7)
4 Maximum rotational speed Continuous

Shaft moment of inertia gcm2
6000 rpm
10 (0.14 oz-in)
3000 rpm
12 (0.17 oz-in)
6000 rpm
22 (0.31 oz-in)
Torque Ncm 0.4 (0.57 oz-in) 9 (12.7 oz-in) 0.6 (0.85 oz-in)
Maximum load Radial N 100 250 50
Axial N 50 250 20
5 Connection Connector Encoders with SSI output stage types SB (N), SG (N): M23, 12-pin male connector /
2m PUR cable for XCC3510Spppp
Frequency Encoders with SSI output stage types SB (N), SG (N): 100 to 500 kHz clock
Supply voltage c 1130V. Max. ripple: 500 mV
6
Wiring diagrams
RS-422 data output Isolated clock input
Iclk
DATA + CLK +
2.2 nF
7 VOD
1 nF
VID
1 nF
2.2 nF
DATA
CLK -
8 Idata = 20 mA |VOD| > 2 V |VID| max.: 5 V

|Iclk| max.: 15 mA
Direction input Input stage Reset to zero

> 100 ms
< 1 ms < 1 ms (shaft stopped) < 2 ms
V supply V supply
9
Direction input Reset input
0V 0V
Direction of Position = 0 (Reset to zero)

counting Clockwise Counter- Clockwise Position
clockwise
10
28
Multi-turn absolute encoders
58 mm encoders
58 mm multi-turn absolute encoders with SSI output convertible

to parallel output
The SSI versions can be converted to a parallel version using the deserialization connecting cable
XCCRM23SUB37pp. See page 35.
1
Solid shaft, 6 mm
4096 ppr Connector, SSI, 25-bit, 1130 V XCC3506PS48SGN 0.725 (1.598)
8192 turns radial
M23 male
Gray

2
105174
binary
8192 ppr Connector, SSI, 25-bit, 1130 V XCC3506PS84SBN 0.725 (1.598)

4096 turns radial binary
M23 male
Gray
3
Solid shaft, 10 mm
XCC3506PS84SBN
4096 ppr Connector, SSI, 25-bit, 1130 V XCC3510PS48SGN 0.685 (1.510)
8192 turns radial Gray
4
M23 male
binary
Cable 2m SSI, 25-bit, 1130 V XCC3510SPA48SGN 0.600 (1.323)

binary (4)

4096 turns radial binary
5
M23 male
Gray
XCC3510SPAppppp
8192 ppr Connector, SSI, 25-bit, 1130 V XCC3514TS84SB 0.655 (1.444)
4096 turns radial
M23 male
binary
6
SSI, 25-bit, 1130 V XCC3514TS84SG 0.655 (1.444)
Gray

For use with Diameter Catalog number Weight
7
kg (lb)
Encoder with through-shaft 6 mm XCCR158RDA06 0.015 (0.033)
566465
XCC3514TS84pp
8 mm XCCR158RDA08 0.010 (0.022)
10 mm XCCR158RDA10 0.010 (0.022)
12 mm XCCR158RDA12 0.010 (0.022)
0.375 in. XCCR158RDAU37 0.011 (0.024) 8

XCCR158RDApp 0.5 in. XCCR158RDAU50 0.007 (0.015)
(4) Stainless steel 316L version.
9
10
29
Wiring Diagrams Multi-turn absolute encoders 0
90 mm encoders
Environment
Encoder type XCC3912Pppppp XCC3930Tppppp
1 Conformity
e
C (F) 20 to +85 (4 to +185) 10 to +75 (+14 to +167)
Storage C (F) 30 to +85 ( 22 to +185) 20 to +85 (4 to +185)
2 electromagnetic
interference

Housing Zamak
3 Shaft
Ball bearings
Stainless steel
6001ZZ 6807ZZ
Shaft moment of inertia gcm2 150 (2.08 oz-in) 56 (0.78 oz-in)
4 Torque
Maximum load Radial
Ncm
N
1 (1.42 oz-in)
200
0.8 (1.13 oz-in)
80
Axial N 100 50
Connection Connector Encoders with SSI output stage types SB (N), SG (N): M23, 12-pin male connector
Frequency Encoders with SSI output stage types SB (N), SG (N): 100 to 500 kHz clock
5 Encoders with type SBN or SGN (Gray) output stage: SSI output without parity, 25-bit clock, 1130 V supply, binary code (SB) or Gray code (SG)
Supply voltage c 1130V
Max. ripple: 500 mV
Wiring diagrams
6 RS-422 data output Isolated clock input

Iclk
DATA + CLK +
2.2 nF
1 nF
VOD
VID
1 nF
7 2.2 nF
DATA
CLK -

|Iclk| max.: 15 mA
Direction input Input stageReset to zero
8 < 1 ms < 1 ms
XCC3912Pppppp
> 100 ms (shaft stopped)
< 2 ms
V supply
V supply Reset input
Direction input 0V
0V
Position = 0 (Reset to zero)
Position
Direction of Counter-
9 counting Clockwise clockwise Clockwise
XCC3930Tppppp
> 1 s (shaft stopped)
1s
V supply
Reset input
0V
10 Position
Position = 0 (Reset to zero)
30
90 mm encoders
90 mm multi-turn absolute encoders with SSI output convertible

to parallel output
The SSI versions can be converted to a parallel version using the deserialization connecting cable
XCCRM23SUB37pp. See page 35.
1
Solid shaft, 12 mm
method (1) type (2) voltage kg (lb)
105178

4096 turns radial
M23 male
binary
2
Gray
XCC3912PSpppp
3
method (1) type (2) voltage
105179
kg (lb)
8192 ppr
4096 turns
Connector,
radial
SSI, 25-bit,
binary
1130 V XCC3930TS84SBN 1.060 (2.337)
4
M23 male
SSI, 25-bit, 1130 V XCC3930TS84SGN 1.060 (2.337)

Gray
5
XCC3930TSpppp

Encoder type Diameter Catalog number Weight
mm
Encoders with through-shaft 12 XCCR290RDP12
kg (lb)
0.060 (0.132)
6
XCC3930TS84ppp
16 XCCR290RDP16 0.060 (0.132)

523200
20 XCCR290RDP20 0.030 (0.066)

7
25 XCCR290RDP25 0.020 (0.044)
XCCR290RDPpp (2) For specifications of the output stage type (indicated by last letter of the catalog number). See page30.
8
10
31
Multi-turn absolute encoders 3
58 mm encoders
XCC3506PS84SBN, XCC3506PS84SGN XCC3514TS84SB, XCC3514TS84SG
1 U37
U37
M23 22.5
M23 22.5
Nitrile seal
Nitrile seal
2
36
2
(2) 81
18
2
72
4 (2) 64
60 24
48.5
72
48.5
10.5
58.5
5.5
50h7
58
(3)
6g7
10 48 (4)
3 (1) 41.5 10
(1) 3.2
88 42.5 7.5
(1) 3 M4 holes at 120 on 42 PCD, depth: 10 mm. (1) Through-shaft, 14 (H7).

(2) Collar XCCRB1 mounted. (2) Flexible mounting kit, 1 x XCCRF5N mounted.
(3) 2 HC M4 x 4 locking screws.
4 XCC3510PS84SBN, XCC3510PS84SGN
U37
XCC3510SPA48SGN
81
10 g6
M23 22.5 52 10
(3) (3
Nitrile seal
(1)
2
(2)
5
2
48
36 f7
60
59
72
48.5
15
10
9.5
19
31.75f9
58.5
9 .5 19
15 21 .5
6
(2)
36f7 (1) 41.5 10
(1) 3 M4 holes at 120 on 48 PCD, depth: 8 mm. (1) 3 holes M4 x 3 at 120 (degrees), depth 8 mm
(2) 3 M3 holes at 120 on 48 PCD, depth: 8 mm. (2) Shaft side protection IP69K
(3) 6 x 2 m cable
90 mm encoders
7 XCC3912PS84SpN XCC3930TS84SpN
M23 14 13
6 5 5 5 110
7
30 (4)
8
64
12g6
66
4
5.5
80h7
90
(2)
58
90
25
(3)
30
(1)
(1)
9 9 .5 84
100
10.5
72
40h7
(1) 6 holes M6 x 1 at 120 on 60 PCD, depth: 12 mm max. (1) Through-shaft, 30 (H7).

(3) 4 M5 x 6 on 78 PCD.
(4) 3 HC M5 x 6 stainless steel A2 locking screws.
10
32
Connections OsiSense XCC
Connector version encoders

Encoder with SSI output (types SBN and SGN)
1
12b
9
1 8
2
2 7
10 12
3 11 6
4 5
Twisted cable pairs + general shielding must be used.

Pin number 1 2 3 4 5 6 7 8 9 10 11 12
Signal/Supply 0V Data + Clk + R Direction Reset R +V R Data Clk R 3

(1)
R = Reserved (do not connect).
(1) : Clockwise direction, : Counterclockwise direction.
Selection of code progression direction

The Direction input enables the code progression to match the rotational direction of the encoder shaft (clockwise or counterclockwise).
Clockwise direction: connect pin 5 to 0 V.
4
Counterclockwise direction: connect pin 5 to + V.
Reset to zero
The Reset input enables the encoder to be set to the zero position.
It is actuated by applying an 1130 Vdc supply to pin 6, while the shaft is stopped, for the following times:
b over 100 ms for XCC3506, XCC3510 and XCC3912,
b over 1 s for XCC3930T. 5
Following a reset to zero, the pin 6 connection must be re-established to 0 V.
Note: In environments subject to electrical interference, we recommend grounding the encoder base using one of the mounting screws.
10
33
Introduction, OsiSense XCC
Specifications, Multi-turn absolute encoders 0
Wiring Diagrams 58 mm and 90 mm encoders

Connection accessories
Connector version multi-turn absolute encoders

The deserialization connecting cable XCCRM23SUB37pp (see page 35) enables conversion,
1
Deserialisation
connecting cable by simple connection, of encoders XCC35pp and XCC39pp with SSI output to parallel output.
e 0514
Franc
Parallel output Specifications
Supply c 1130 V
SSI
GRA
XCC-R Y =>
M23SU NPN
GRA
B37 Y
NG
10
11 12
Clk ) R
Encoder input/output Levels RS-422
53
0-0
9 Data) (
825
8 (
+V R 5
8
Parallel outputs Push-pull protection against short-circuits

Operating temperature 0 to 50 C (+32 to +122 F)
2
SSI output
36 x 0.14 mm2 shielded cable and SUB-D 37-pin end connector connections
Encoders Encoders
4096 ppr 8192 ppr
Pin number Signal 8192 turns 4096 turns
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
1 20 (LSB)
20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 2 21
3 22
Resolution per revolution

Resolution per revolution
Male connector (pin view) 4 23
3 b Selection of code progression direction
5
6
24
25
The Direction input enables the code progression to match the
7 26
rotational direction of the encoder shaft (clockwise or
counterclockwise). 8 27
Clockwise direction: connect pin 30 to an 1130 Vdc supply. 9 28
Counterclockwise direction: connect pin 30 to 0 V. 10 29
b Reset to zero
4
11 210
The Reset input enables the encoder to be set to the zero
position. It is actuated by applying an 1130 Vdc supply to pin 12 211
27 for more than 1 second. 13 212
b Encoder selection 14 213
The Select input enables encoder selection when several units
15 214
are connected in parallel on the same data bus.
Encoder selected: apply 0 V potential to pin 28. 16 215
Number of revolutions
Number of revolutions
Encoder not selected: apply 1130 Vdc to pin 28. 17 216
5
b Data locking 18 217
The Latch input, particularly useful for high speed applications,
19 218
enables the freezing of the encoder data output while reading
the code. 20 219
Function not actuated: apply 0 V potential to pin 29. 21 220
Function actuated: apply 1130 Vdc to pin 29. 22 221
23 222
24 223
6 25
26
224 (MSB)
R
27 Reset to zero
R = Reserved, do not connect 28 Select
(1) : clockwise direction, : counterclockwise direction. 29 Latch
Note: In environments subject to electrical interference, we 30 Direction (1)
recommend grounding the encoder base using one of the 31, 32, 33, 34, 35 R
7 mounting screws.
36
37
+V
0V
Wiring diagrams
Latch input Push-Pull Select input
V supply Supply: 11 to 30 V c V supply
Latch input < 1 ms < 1 ms Max. ripple: 500 mV Select input < 1 ms < 1 ms
0V Protection against reverse polarity 0V
8
Data Data Data Max. no-load consumption: 50 mA (30 mA typical on 24 V) Data Data Data
d0 to d24 d0 to d24
valid frozen valid valid impeded valid
11 to 30 V
min. max. min. max.
Level 0 0V 0.3 x V supply Level 0 0V 0.3 x V supply
Level 1 0.7 x V supply V supply Level 1 0.7 x V supply V supply
I Latch < 5 mA Output I Select < 5 mA
Direction input Input stage Reset to zero

> 100 ms
9
< 1 ms < 1 ms
(shaft stopped) < 2 ms
V supply Max. current: 20 mA
Direction input Level 0 max.: 1.5 V V supply
0V Level 1 min.: V supply 2.5 V Reset input
Protection against short-circuits 0V
Direction of Counter- NPN/PNP compatible
counting Clockwise Clockwise
clockwise
Position Position = 0 (Reset to zero)
min. max.
Level 0 0 V 0.3 x V supply Increasing Clockwise min. max.
10 Level 1 0.7 x V supply V supply

I DIR < 5 mA
Increasing
Counterclockwise
Level 0
Level 1
I Reset
0V 0.3 x V supply
0.7 x V supply V supply
< 5 mA
Note: The Latch and Select inputs must be connected to 0 V to become active.
34
Connection accessories
Cables
Description For encoders Number of Catalog number Weight
Shielded Incremental
wires/c.s.a. mm
10 wires/0.14 mm2 6 XCCRX10
kg (lb)
5.000 (11.023) 1
566466
cables with Absolute, single turn // 16 wires/0.14 mm2 6.8 XCCRX16 5.600 (12.346)
twisted pairs
Absolute, single turn 1 pair of 0.50mm2 8.6 XCCRXS8 11.750 (25.904)
Length: 100 m
and multi-turn SSI, wires and 3 pairs
UL/CSA
and incremental of 0.14 mm2 wires
XZCC23FMDP120S
Connectors
Description For use
with
Number
of pins
Type Catalog number
kg
Weight
(lb)
2
M23 female Encoders 12 Straight XZCC23FDP120S 0.040 (0.088)
566467
connectors Incremental,
absolute SSI
Absolute encoders, 16 Straight XZCC23FDP160S 0.040 (0.088)
single turn parallel
XZCCHFDM370S Connector kit SSI jumper cable or
1 female + 1 male incremental encoders
XZCC23FMDP120S 0.090 (0.198)
3
SUB-D 37-pin Absolute encoders, 37 Straight XZCCHFDM370S 0.115 (0.254)
105193
female connector multi-turn parallel
Deserialization jumper cables (1)

Description Type Catalog number Weight
4
kg (lb)
M23F - SUB-D37M SSI Gray//Gray PNP (PG) XCCRM23SUB37PG 0.225 (0.496)
jumper cables, SSI Gray//Gray NPN (NG) XCCRM23SUB37NG 0.225 (0.496)
straight M23, cable
SSI Binary//Binary PNP (PB) XCCRM23SUB37PB 0.225 (0.496)
length 0.5 m
SSI Binary//Binary NPN (NB) XCCRM23SUB37NB 0.225 (0.496)
XCCRM23SUB37PG
Pre-wired connectors
Description Number Length Catalog number Weight
5
of wires kg (lb)
105194
M23F 8 wires 2m XCCPM23122L2 0.190 (0.419)

straight Absolute SSI 5m XCCPM23122L5 0.470 (1.036)
10 m XCCPM23122L10 0.900 (1.984)
10 wires 2m XCCPM23121L2 0.160 (0.353)
Incremental 5m XCCPM23121L5 0.330 (0.728)
10 m XCCPM23121L10 0.620 (1.367)
16 wires
Absolute single turn //
2m
5m
XCCPM23161L2
XCCPM23161L5
0.175 (0.386)
0.415 (0.915) 6
XCCPM23161L2 10 m XCCPM23161L10 0.790 (0.790)
(1) See Overview, page 6 and Connections, page 33.
Pre-wired connector connections

XCCPM23122Lp XCCPM23121Lp XCCPM23161Lp
7
Pin Function Color Pin Function Color Pin Function Color
1 0V BK 1 A/ BN 1 Gnd WH
2 Data (+) BN 2 V Supply RD 2 V Supply BN
3 Clk (+) GN 3 Top 0 VT 3 d0 GN
8
4 R 4 Top 0/ BU 4 d1 YE
5 VT 5 B YE 5 d2 GY
6 Reset BU 6 B/ OG 6 d3 OG
7 R 7 R 7 d4 BU
8 +V RD 8 A GN 8 d5 RD
9 R 9 R 9 d6 BK
10 Data () OG 10 Gnd BK 10 d7 VT
11
12
Clk ()
R
YE

11
12
Gnd
V Supply
WH
GY
11
12
d8
d9
WH/BN
WH/GN 9
13 d10 WH/YE
14 d11 WH/BK
15 d12 WH/OG
16 WH/RD
Direction of rotation for pin 5 R: reserved, do not connect Direction of rotation for pin 16
10
35
Catalog Numbers Connection and mounting 0
Mounting and installation accessories
Shaft couplings with spring (1)

Maximum torque Ncm 300 (424.83 oz-in)
1 Maximum angular misalignment

Maximum radial misalignment mm
5
1.5
Materials Collars Zamak
Spring Nickel plated steel
Compression/Expansion mm 1 max.
Homokinetic (flexible) shaft couplings with bellows

2 Maximum torque
Maximum angular misalignment
Ncm 80 (113.29 oz-in)
4
Maximum lateral misalignment mm 0.3
Maximum axial misalignment mm 0.5
Materials Bellows Stainless steel
Mounting collar Aluminum
Screws Stainless steel
3 Elastic monobloc shaft couplings

Maximum angular misalignment 2.5
Maximum radial misalignment mm 0.3
Compression/Expansion mm 2 max.
Materials Glass fiber reinforced polyamide
4 (1) Not recommended for resolutions higher than 500 pulses per revolution.
Catalog Numbers
Shaft couplings (for encoders with solid shaft)
Type Bore diameter Bore diameter Catalog Weight
(encoder side) (machine side) kg (lb)
5 With spring (1) 6 mm 6 mm XCCRAR0606 0.125 (0.276)
105191
8 mm XCCRAR0608 0.125 (0.276)

10 mm XCCRAR0610 0.125 (0.276)
XCCRARppp
12 mm XCCRAR0612 0.120 (0.265)
14 mm XCCRAR0614 0.120 (0.265)
16 mm XCCRAR0616 0.120 (0.265)
10 mm 8 mm XCCRAR1008 0.120 (0.265)
6 10 mm
12 mm
XCCRAR1010
XCCRAR1012
0.120 (0.265)
0.110 (0.243)
14 mm XCCRAR1014 0.110 (0.243)
105192
16 mm XCCRAR1016 0.105 (0.231)

12 mm 8 mm XCCRAR1208 0.110 (0.243)
XCCRASpppp 12 mm XCCRAR1212 0.110 (0.243)
7
14 mm XCCRAR1214 0.105 (0.231)
16 mm XCCRAR1216 0.100 (0.220)
Homokinetic 6 mm 6 mm XCCRAS0606 0.020 (0.044)
(flexible) with 8 mm XCCRAS0608 0.020 (0.044)
bellows
10 mm XCCRAS0610 0.020 (0.044)
12 mm XCCRAS0612 0.015 (0.033)
105192
0.25 in XCCRAS06U25 0.018 (0.040)
8 XCCRASppppS 10 mm
0.375 in
8 mm
XCCRAS06U37
XCCRAS1008
0.016 (0.035)
0.015 (0.033)
10 mm XCCRAS1010 0.015 (0.033)
10 mm XCCRAS1010S (2) 0.015 (0.033)
12 mm XCCRAS1012 0.015 (0.033)
12 mm XCCRAS1012S (2) 0.015 (0.033)
0.25 in XCCRAS10U25 0.016 (0.035)
9 0.375 in XCCRAS10U37 0.014 (0.031)

806309
12 mm 8 mm XCCRAS1208 0.010 (0.022)

12 mm XCCRAS1212 0.010 (0.022)
XCCRAE0606 0.25 in XCCRAS12U25 0.015 (0.033)
0.375 in XCCRAS12U37 0.013 (0.029)
0.5 in XCCRAS12U50 0.012 (0.026)
Elastic, monobloc 6 mm 6 mm XCCRAE0606 0.010 (0.022)
10 (1) Not recommended for resolutions higher than 500 pulses per revolution.
(2) Stainless steel version 316L.
36
Mounting and installation accessories
Anti-rotation devices (for encoders with through-shaft)

Description Features For encoders Catalog number Weight
1
kg (lb)
806311
Flexible mounting Set of 2 flexible 40 XCC1406T XCCRF4 0.010 (0.022)

kit mountings + screws
XCCRFp 1 flexible mounting 58 XCC15ppT, XCCRF5N 0.020 (0.044)

+ screws XCC25ppT,
XCC3514T
Set of 2 flexible 90 XCC19ppT, XCCRF9 0.030 (0.066)
mountings + screws XCC29ppT,
2
DF600268
XCC39ppT
Mounting and mounting accessories (for encoders with solid shaft)
Description For encoders Catalog number Weight
kg (lb)
Set of 3 eccentric XCC15ppP, XCC25ppP, XCC35ppP XCCRG5 0.010 (0.022)
XCCRGp clamps
+ 3 mounting screws (1) XCC1912P, XCC2912P, XCC3912P
3
XCCRG9 0.030 (0.066)
+ 3 washers
Plain brackets XCC1506, XCC2506 XCCRE5S 1.300 (2.866)
566461
for 58 (2)
XCC1510P, XCC2510P, XCC3510P XCCRE5SN 0.130 (2.866)
XCC1510S, XCC2510S, XCC2510S XCCRE5SNP 0.130 (2.866)
Plain brackets
for 90 (2)
XCC1912P, XCC2912P, XCC3912P XCCRE9SN 0.290 (0.639)
4
Fixing collar (2) XCC1510, XCC2510, XCC3510 XCCRB6 0.060 (0.132)
for 58 mm
Brackets with play XCC1510P, XCC2510P, XCCRE5RN 0.345 (0.761)
XCCRE9S compensator (2) XCC3510PSppSpp
XCC1912P, XCC2912P, XCC3912P XCCRE9RN 0.890 (1.962)
Collar for synchro XCC1510P, XCC2510P, XCC3510P XCCRB1 0.040 (0.088) 5

566462
mounting, for 58 (2)

Substitution interface XCC1912P, XCC2912P, XCC3912P XCCRB2 0.175 (0.386)
collar for 90 (2)
IP 67 sealed collar for XCC1510P, XCC2510P, XCCRB3 0.030 (0.066)
58 (2) XCC3510PSppSpN
Reduction collars for encoders with through-shaft

Description For use with Reduction Catalog number Weight
6
kg (lb)
Reduction collars Incremental encoders 14 mm to 6 mm XCCR158RDA06 0.015 (0.033)
58
XCCREpR 14 mm to 8 mm XCCR158RDA08 0.010 (0.022)
Absolute single
turn encoders 58
7
566463
14 mm to 10 mm XCCR158RDA10 0.010 (0.022)

Absolute multi-turn 14 mm to 12 mm XCCR158RDA12 0.010 (0.022)
encoders 58
14 mm to 0.375 in. XCCR158RDAU37 0.011 (0.024)
XCCRB1 14 mm to 0.5 in. XCCR158RDAU50 0.007 (0.015)
8
Incremental encoders 30 mm to 12 mm XCCR290RDP12 0.060 (0.132)
566464
90
30 mm to 16 mm XCCR290RDP16 0.040 (0.088)
Absolute single turn
and multi-turn encoders 30 mm to 20 mm XCCR290RDP20 0.030 (0.066)
90
30 mm to 25 mm XCCR290RDP25 0.020 (0.044)
9
30 mm to 0.375 in. XCCR290RDPU37 0.080 (0.176)
XCCRB2
30 mm to 0.5 in. XCCR290RDPU50 0.060 (0.132)
105188
30 mm to 0.75 in. XCCR290RDPU75 0.030 (0.066)

XCCR158RDA08
30 mm to 1.0 in. XXCR290RDPU1 0.018 (0.040)
10
(1) 3 M3 x 12 screws for XCCRG5, 3 M4 x 25 screws for XCCRG9.
(2) Screws included with brackets and collars.
105190
XCCRp90RDP20
37
Connection and mounting 0
Accessories
Shaft couplings
XCCRARpppp XCCRASpppp XCCRAE0606
1 e e s e e s 6H7
2.6
XCCRAR0606 6 mm 6 mm XCCRAS0606 6 mm 6 mm
6
20
6
35
2
XCCRAR0614 6 mm 14 mm XCCRAS1008 10 mm 8 mm 6H7
2.6
50
XCCRAR0616 6 mm 16 mm XCCRAS1010 10 mm 10 mm 15
9
XCCRAR1008 10 mm 8 mm XCCRAS1010S 10 mm 10 mm
s
21
XCCRAR1012 10 mm 12 mm XCCRAS1012S 10 mm 12 mm
s
26 XCCRAR1016 10 mm 16 mm XCCRAS1212 12 mm 12 mm
3 XCCRAR1208
XCCRAR1212
12 mm
12 mm
8 mm
12 mm
XCCRAS06U25 6 mm to 0.25 in
XCCRAR1214 12 mm 14 mm XCCRAS10U37S 10 mm to 0.375 in
XCCRAR1216 12 mm 16 mm XCCRAS10U25 10 mm to 0.25 in
4 XCCRAS12U50 12 mm to 0.5 in
5 Typical installation
58
58
58
6 90
60
64
10
38
Dimensions (continued) OsiSense XCC
Accessories
Anti-rotation devices (flexible mounting kit)

XCCRF4 XCCRF5N
Mounting on 40 mm encoder XCC1406T Mounting on 58 mm encoders XCC1514T, XCC2514T and XCC3514T 1
88
(1) 3.2 46 7.5 (1)
64
81
36
40
57
22
2
20
52 18
3.2
7.5
66
(1) 2 holes 4 at 180 on 30 PCD. TC M4 x 5 screw mountings. (1) 3 holes 4.1 at 120 on 48 PCD. TC M3 x 6 screw mountings.
3
XCCRF9
Mounting on 90 mm encoders XCC1930T, XCC2930T and XCC3930T
30 5.5
100
4
(1)
56
5
110
6
44 21
65
(1) 4 holes 5.2 at 90 on 78 PCD. TH M5 x 6 screw mountings.
Collar kits 7
XCCRB1 XCCRB2
Collar for synchro mounting, for 58 encoders: Interface collar for 90 encoders:
XCC15ppP, XCC25ppP and XXC35ppP XCC1912P, XCC2912P, XCC3912P
(2) 10
(1)
(1)
8
60
36 H8
(2)
50 h9
53
58
56 H9
84.5
89.5
9
4 32
3
10
7 12.5
10
20
(1) 3 holes M4 x 0.7 at 120 on 42 PCD. TC M3 x 8 screw (1) 4 holes 6.6 at 120 on 60 PCD. Countersunk for TZ M6 x 16 screws.
mountings. (2) 4 holes M5 x 0.8 at 90 on 78 PCD.
(2) 3 counterbored holes for TC M4 x 8 screws at 120
on48PCD.
39
Dimensions (continued) OsiSense XCC
Connection and mounting 0
Accessories
Collar kits (continued)

XCCRB1 XCCRB2
1 IP 67 sealed collar for 58 encoders:
XCC1510P, XCC2510P and XCC3510PSppSpN
(1) (1)
63.5
52.4
36 f7
58
26.2
2
Nitrile seal 3 36 4x 5.5 and R2.5
10 (2) Viton seal 52.4
13.5
3
18
(1) 3 holes M3 x 0.5 at 120on 48 PCD. TZ M3 x 8 screw mountings.

(2) Shaft 10 mm.
Plain brackets
XCCRE5S XCCRE5SN XCCRE9SN
4
(1)
36
(1) 40
80
80
116
45
5
45
(1)
6
70
(2)
50 G8
32
3
6
110
6
23
6
40
40
17
6
60 60 2x7
80 80 63
30
7
20
10
40 4x7
(1) 3 holes 4.5 at 120 on 42 PCD. 90
3 CHC M3 x 8 screws included.
(1) 3 counterbored holes for CHC M3 screws at (1) 6 holes 7 for CHC M6 screws at 60
120 on 48 PCD. on 60 PCD.
(2) 3 counterbored holes for CHC M4 screws at
8 120 on 48 PCD.
10
40
Dimensions (continued), OsiSense XCC
Connections Connection and mounting
Accessories
Brackets with play compensator

XCCRE5RN XCCRE9RN
1
12
20
31.8 (2)
40.1 (1)
2
93
48 max.
40 min.
160
10
(1)
80
3
80 max.
60 min.
12
10
140
4
85
50
20
10
80
60 4x6.5
35
20
5
90 4x6.5
CHC M3 x 12 screws included
(1) 3 counterbored holes for CHC M3 screws at 120 on 48 PCD.
6
Reduction collars for through-shaft
XCCR158RDApp XCCR290RDPpp
For 58 incremental, absolute single turn, and absolute For 90 incremental, absolute single turn, and absolute multi-turn encoders
7
multi-turn encoders
40 X H7
+2.5
32
+4
30
1.5 14g7
12
20
2 1 H8
8
58.5
XCC XCC
XCCR158RDA06 6 mm XCCR290RDP12 12 mm
XCCR158RDA08
XCCR158RDA10
8 mm
10 mm
XCCR290RDP16
XCCR290RDP20
16 mm
20 mm 9
XCCR158RDA12 12 mm XCCR290RDP25 25 mm
R158RDAU37 0.375 in. R290RDPU37 0.375 in.
R158RDAU50 0.5 in. R290RDPU50 0.5 in.
R290RDPU37 0.75 in.
R290RDPU1 1 in.
10
41
Introduction OsiSense XCC
Multi-turn fieldbus encoders 0
CANopen 58 mm encoders
Introduction
The OsiSense XCC CANopen 58 mm multi-turn absolute encoder is designed to
1 meet the requirements for configurations encountered in industrial communication
installations. Models XCC3510PS84CBN and XCC3515CS84CBN integrate
CANopen communication protocols as standard.
The CAN-Bus interface integrated in to the absolute rotary encoder supports all
CANopen functions. The following modes can be programmed and made
operational or stopped: Pooling mode, Cyclic mode and Sync mode. The application-
2 specific protocol supports the programming of the following additional functions:
- code sequence,
- resolution per revolution,
- global resolution,
1 - presets,
2 - bus speed and address.
105231C
3 3
4
The connection housing ensures simple assembly and addressing. It performs the
function of a T coupler and has M12 connectors for the incoming and outgoing bus
signals.
The rotary encoder can be supplied via the CANopen bus or by using the dedicated
5 PG9 cable gland. The address of the equipment is adjusted from the rotary switches.
Encoders XCC3510PS84CBN and XCC3515CS84CBN have 2 LEDs located on the
rear face of the housing to facilitate monitoring and diagnostics conforming to
4 1
2
2 LEDs
PG9 cable gland for supply cable
standard DR303-3 v1.3.0 (CIA). The LEDs provide information regarding the
operating mode, bus errors, and supply problems.
3 M12 male connector (CANopen incoming bus)
4 M12 female connector (CANopen outgoing bus) Standards
5 Encoder shaft Encoders XCC3510PS84CBN and XCC3515CS84CBN conform to:
- standard ISO 11898,
- specifications DS301 V4.02/CAN2.A, DS406 V3.2, DR303-1 V1.7 (cabling and
5 connector), DR303-3 V1.3 (light indicator).

They are CiA certified and meet the requirements of the Schneider Electric
interoperability standards.
Encoder setup/configuration software

The CANopen bus is configured with the aid of SyCon version 2.9 software,
reference SYCSPULF, to be ordered separately.
6 The EDS file, reference TEXCC35CBN_0101E.eds, required for encoder
configuration can be downloaded from our website, www.schneider-electric.com.
Configurable parameters
b Transmission speed
Default value: 250 Kbaud, configurable from 10Kbaud (distance 6700 m) to
1Mbaud (distance 12 m).
7 b Address
defines encoder identification on the bus, 1 to 99. Default value: id = 1. It is defined
using 2 coding wheels located in the housing.
b Resolution
defines the number of pulses per revolution (0 to 8191).
b Global resolution
defines the total number of codes of the encoder (0 to 33,554,431).
8 b Direction
enables the defining of the counting direction of the encoder (increasing clockwise or
counterclockwise) in relation to its mechanical position.
b Reset to X
defines the value of its actual position (reset to X or reset to amount).
Communication modes
9 b Pooling mode
The encoder responds to requests from the master. This mode enables
programming and reading of the encoder parameters while in position.
b Cyclic mode
The encoder transmits its data cyclically. The transmission period is programmable
from 0 to 65,535 ms.
b Sync mode
10 The encoder transmits its data when the master sends a synchro.
42
Specifications OsiSense XCC
Specifications
Encoder type XCC3510PS84CBN XCC3515CS84CBN
Conformity e
1
Temperature Operation (housing) C (F) 40 to +85 (40 to +185)
Storage C (F) 40 to +85 (40 to +185)
Degree of protection Conforming to IEC 60529 IP64

2
Shock resistance Conforming to IEC 60068-2-27 100 gn (6 ms, 1/2 sine wave)

Surge withstand Conforming to IEC 61000-4-5: level 1, 500 V
3
Housing Aluminum
Shaft Stainless steel
Ball bearings 6000ZZ1 6803ZZ
4
Shaft type mm 10, solid shaft (h8) 15, hollow shaft (F7)
Maximum rotational speed Continuous 6000 rpm
Shaft moment of inertia gcm2 30 (0.16 oz/in2)
Torque Ncm 0.3 (0.44 oz-in) 5

Connection Connector CANopen bus network by M12 connector (input: male; output: female), 5-pin,
Acoding.
Supply via PG9 of the encoder 6
Frequency kHz 800
Supply Nominal voltage V c 24 (10-30)

Recommended PELV supply (protective extra low voltage)
Protection Against reverse polarity and voltage surges

7
Signaling Green LED: CAN_RUN; red LED: CAN_ERR
Communication
CANopen service Conformity class S10 (Transparent Ready)
Profile
Specifications
DS406 V3.1, class C2
ISO 11898, DS301 V4.02/CAN2.A, DR303-1 V1.7, DR303-3 V1.3.
8
Structure Speed Kbps 10, 20, 50, 125, 250, 500, 800 and 1000
Product certification CiA

Schneider Electric interoperability standards
9
Distance depending on speed 250 m at 250 kbps,
100 m at 500 kbps,
30 m at 800 kbps,
12 m at 1000 kbps
10
43
Description Connection Output Supply Catalog number Weight
105231C
1 method stage
type
voltage
kg (lb)
Solid shaft, 10 mm
58 mm multi-turn Radial CANopen, 1130 V XCC3510PS84CBN 0.560 (1.234)
absolute CANopen 2 x M12 25-bit,
bus encoder connectors binary
Resolution 8192 pts/ Acoding 1 x
XCC3510PS84CBN 4096 turns PG9
2 Hollow shaft, 15 mm (1)
105232C
58 mm multi-turn Radial CANopen, 1130 V XCC3515CS84CBN 0.570 (1.256)

absolute CANopen 2 x M12 25-bit,
bus encoder connectors binary
Resolution 8192 pts/ Acoding 1 x
4096 turns PG9
3
Reduction collars for encoders with hollow shaft, 15 mm
XCC3515CS84CBN For use with Diameter Catalog number Weight
kg (lb)
Encoder with hollow shaft 6 mm XCCR358RDL06 0.040 (0.088)
600496
XCC3515CS84CBN 8 mm XCCR358RDL08 0.030 (0.066)

10 mm XCCR358RDL10 0.025 (0.055)
12 mm XCCR358RDL12 0.020 (0.044)
4 14 mm
0.5 in.
XCCR358RDL14
XCCR358RDLU50
0.010
0.007
(0.022)
(0.015)
0.375 in. XCCR358RDLU37 0.011 (0.024)
Connection accessories for CANopen bus
Connecting cables for CANopen bus
Description Length Catalog number Weight
5 m
Connecting cables fitted with 2 0.3 FTXCN3203
kg (lb)
0.040 (0.088)
elbowed type M12 connectors, 0.6 FTXCN3206 0.070 (0.154)
Acoding
1 FTXCN3210 0.100 (0.220)
2 FTXCN3220 0.160 (0.352)
3 FTXCN3230 0.220 (0.485)
6 CANopen cables
5 FTXCN3250 0.430 (0.947)
Description Length Unit Weight

catalog number kg (lb)
105507
Standard CANopen cables 50 m TSXCANCA50 4.930 (10.868)

conforming to IEC 60332-1 100 m TSXCANCA100 8.800 (19.400)
300 m TSXCANCA300 24.560 (54.145)
7 TSXCANCApp
CANopen cables
for severe environments (2)
50 m TSXCANCD50 3.510 (7.738)
100 m TSXCANCD100 7.770 (17.129)
or moving installations,
e marking: low smoke emission. 300 m TSXCANCD300 21.760 (47.972)
Halogen free. No flame
propagation (IEC 60332-1).
Resistance to oils.
DF504022
8
Shielded connectors, cabled by user
Description Type Unit Weight
catalog number kg (lb)
M12 female connector Straight XZCC12FDB50R 0.020 (0.044)
5 spring terminals
XZCC12FDB50R M12 male connector Straight XZCC12MDB50R 0.025 (0.055)
5 spring terminals
9
(2) Severe environment:
- resistance to hydrocarbons, industrial oils, detergents, weld spatter,
- relative humidity up to 100%,
DF504021
- saline atmosphere,
- extreme variations in temperature,
- operating temperature between 10 C and +70 C ( +14 to 158 F)
- moving installation.
10 XZCC12MDB50R
44
Dimensions, OsiSense XCC
Connections Multi-turn fieldbus encoders
Dimensions
XCC3510PS84CBN XCC3515CS84CBN
12 12 15 12 12 13
1
10
15F7
10h8
63
2
95
95
36f7
58
20
58
20
18
3 .2
(1)
(1) 15 (2) 80 30 72 27 .5
60 110 98
3
(1) 3 M4 holes at 120 on 48 PCD, depth: 6 mm. (1) Flexible mounting kit, 1 x XCCRF5B mounted.
(2) 3 M3 holes at 120 on 48 PCD, depth: 6 mm.
Connections
4
CANopen
RT Bus termination resistor

On
RT RT
On On
IN OUT 1st or Encoder X

+ - last encoder
901 901 901 5

78
78
78
23
23
23
456 456 456
Bd x1
x10
Permissible address range
901 901 1 => 99

0 => reserve
78
78
23
23
6
4 56 4 56
x10 x1
Example: 59
4 3 3 4
5 5
7
1 2 2 1
Bus In Bus Out
M12 male connector M12 female connector
Pin 1 2 3 4 5
Function CAN_SHLD (CAN_V+) CAN_GND CAN_H CAN_L
Terminal + 8
Function 24 V 0V
10
45
Introduction OsiSense XCC
Profibus-DP 58 mm encoders
Introduction
The OsiSense XCC Profibus-DP 58 mm multi-turn absolute encoder is designed
1 to meet the requirements for configurations encountered in industrial communication
installations. Models XCC3510PV84FBN and XCC3515CV84FBN integrate
Profibus-DP communication protocols as standard.
The Profibus-DP bus interface integrated in the absolute rotary encoder is based on
RS485 transmission and enables speeds of up to 12 Mbps. Exchanges are possible
from the master to the encoder. The application specific protocol
2 DP-V0 conforms to the class 2 profile for encoders and supports the following
functions:
- code sequence,
- resolution per revolution,
- global resolution,
1
- presets,
105233
- soft stops,
3 2
- speed and address.
The housing of the encoders provides easy access to 2 coding wheels for
configuration of the address. 2 LEDs are integrated to facilitate diagnostics. It
3 performs the function of a T coupler with 3 x PG9 cable glands (2 for the incoming
and outgoing bus signals, 1 for the encoder supply).
Profibus-DP encoders have 2 LEDs to indicate the encoder status:
4 1 2 LEDs
2 PG9 cable gland for supply cable
- Green LED: Sta
- Red LED: Err.
3 Encoder shaft
Standards
Profibus-DP encoders XCC3510PV84FBN and XCC3515CV84FBN conform to:
- international standards IEC 61158 and IEC 61784 for Profibus-DP communication
- the Profibus-DP standard EN 50170 Class 2 in accordance with profile 3.062V1.1
5 for the encoder application.
They are certified by the PNO organization and meet the requirements of the
Schneider Electric interoperability standards.
Encoder setup/configuration software

The Profibus-DP bus is configured with the aid of SyCon version 2.9 software,
reference SYCSPULFDCD29M, to be ordered separately.
6 The GSD gsd file required for encoder configuration can be downloaded from our
website, www.schneider-electric.com, under reference TELE4711.GSD.
Configurable parameters
b Speed
defines the instantaneous speed in 16-bit binary. It can be given according to 1 of
7 4modes:
v Steps/10 ms,
v Steps/100 ms,
v Steps/s or rpm.
b Address
Addressing is performed using 2 coding wheels located in the housing. The
addresses possible are 1 to 99.
8
b Resolution
defines the number of pulses per revolution (0 to 8191)
b Global resolution
defines the total number of codes of the encoder (0 to 33,554,431)
b Direction
enables defining of the counting direction of the encoder (increasing clockwise or
counterclockwise) in relation to its mechanical position
b 2 soft stops
9 one high stop and one low stop can be defined and extracted from the position word
b Reset to X
defines the value of its actual position (reset to X or reset to amount).
Communication modes
2 communication modes are possible:
10 - simple and fast, cyclic and deterministic exchanges between the master and the
encoder,
- acyclic exchanges.
46
Specifications OsiSense XCC
Specifications
Encoder type XCC3510PV84FBN XCC3515CV84FBN
Conformity DIN VDE 0160
1
Temperature Operation (housing) C (F) 40 to +85 (40 to +185)
Storage C (F) 40 to +85 (40 to +185)
Degree of protection Conforming to IEC 60529 IP64

2
Shock resistance Conforming to IEC 60068-2-27 100 gn (6 ms, 1/2 sine wave)

Surge withstand Conforming to IEC 61000-4-5: level 1, 500 V
3
Housing Aluminum
Shaft Stainless steel
Ball bearings 6000ZZ1 6803ZZ
4
Shaft type mm 10, solid shaft (h8) 15, hollow shaft (F7)
Maximum rotational speed 6000 rpm
Shaft moment of inertia gcm2 30 (0.16 oz/in2)
Torque Ncm 0.3 (0.44 oz-in) 5

Connection Via PG9 3 x PG9 entries:
- 2 x PG9 entries for the Profibus-DP bus
- 1 x PG9, positioned in middle, for external supply (10-30 V)
Due to the T integrated in the housing, the supply can be distributed on the bus.
6
Connections are made using screw terminals.
Frequency kHz 800
Supply Nominal voltage V c 24 (1030)
Current consumption, no-load mA

Recommended PELV supply (protective extra low voltage)
100 7
Protection Against reverse polarity and voltage surges
Signaling Green LED: Sta; red LED: Err
Communication
Profibus-DP V0 service Profile for encoder 3.062 V1.1. 8
Specifications IEC61158, IEC61784, EN 50170 class 2, EN50254
Interface RS485
Speed 9.6 Kbps to 12 Mbps max.
Product certification PNO

Schneider Electric interoperability standards
9
10
47
Catalog Numbers
Description Connection Output Supply Catalog number Weight
1
105233
method stage voltage

type kg (lb)
Solid shaft, 10 mm
58 mm multi-turn 3 x PG9 radial Profibus-DP, 1130 V XCC3510PV84FBN 0.560 (1.234)
absolute 25-bit,
Profibus-DP binary
encoder
Resolution 8192 pts/
2 XCC3510PV84FBN
4096 turns
Hollow shaft, 15 mm (1)

105236
58 mm multi-turn 3 x PG9 radial Profibus-DP, 1130 V XCC3515CV84FBN 0.570 (1.256)

absolute 25-bit,
Profibus-DP binary
encoder
Resolution 8192 pts/
3 4096 turns
XCC3515CV84FBN
Reduction collars for encoders with hollow shaft, 15 mm
For use with Diameter Catalog number Weight
kg (lb)
600495
Encoder with hollow shaft 6 mm XCCR358RDL06 0.040 (0.088)
4 XCC3515CV84FBN
8 mm XCCR358RDL08 0.030 (0.066)
10 mm XCCR358RDL10 0.025 (0.055)
12 mm XCCR358RDL12 0.020 (0.044)
14 mm XCCR358RDL14 0.010 (0.022)

5 0.5 in. XCCR358RDLU50 0.007 (0.015)
0.375 in. XCCR358RDLU37 0.011 (0.024)
10
48
Dimensions, OsiSense XCC
Connections Multi-turn fieldbus encoders
XCC3510PV84FBN XCC3515CV84FBN
20 20 6 .5-9 15 20 20 6 .5-9 15
1
10
15F7
2
10h8
63
86
84
36f7
58
20
58
20
18
3 .2
(1)
(1) 15 (2) 80 30 72 27 .5
60 110 98
3
(1) 3 M4 holes at 120 on 48 PCD, depth: 6 mm. (1) Flexible mounting kit, 1 x XCCRF5B mounted.
(2) 3 M3 holes at 120 on 48 PCD, depth: 6 mm.
Connection
Profibus-DP 4
R Bus termination resistor
On R R
On On
5
1st or Encoder X
B A - + B A - + last encoder
901 901
78
78
23
23
456 456
x10 x1
Permissible address range
901 901
6
78
78
23
23
4 56 4 56 0 => 99
x10 x1
Example: 55
7
Terminal B (left) A (left) +
Function Ground Bus line B Bus line A 0V 1130 V

(Bus in) (Bus in)
Terminal B (right) A (right) +
Function Bus line B Bus line A 0V 1130 V

(Bus out) (Bus out)
8
10
49
Catalog Numbers, Multi-turn fieldbus encoders 0
Dimensions Accessories for CANopen and Profibus-DP encoders
Homokinetic (flexible) shaft couplings with bellows

1 Maximum angular misalignment
Maximum lateral misalignment mm
4
0.3
Maximum axial misalignment mm 0.5
Materials Bellows Stainless steel
Mounting collar Aluminum
Screws Stainless steel
Catalog numbers
2 Shaft couplings (for encoders with solid shaft)
Type Bore diameter Bore diameter Catalog number Weight
(encoder side) (machine side) kg (lb)
Homokinetic 10 mm 8 mm XCCRAS1008 0.015 (0.033)
(flexible) 10 mm XCCRAS1010 0.015 (0.033)
with bellows
12 mm XCCRAS1012 0.015 (0.033)
3 Anti-rotation devices (for encoders with hollow shaft)

Description Features For encoders Catalog number Weight
kg (lb)
105192
Flexible mounting 1 flexible mounting CANopen and Profibus-DP XCCRF5B 0.010 (0.022)
kit + screws
XCCRASpppp
Reduction collars for encoders with hollow shaft
Description For use Reduction Catalog number Weight
4 Reduction collars
with
CANopen and Profibus-DP 15 mm to 6 mm XCCR358RDL06
kg (lb)
0.040 (0.088)
105189
encoders 15 mm to 8 mm XCCR358RDL08 0.030 (0.066)

XCCR358RDL06 15 mm to 10 mm XCCR358RDL10 0.025 (0.055)
15 mm to 12 mm XCCR358RDL12 0.020 (0.044)
15 mm to 14 mm XCCR358RDL14 0.010 (0.022)
15 mm to 0.5 in. XCCR358RDLU50 0.007 (0.015)
5 15 mm to 0.375 in. XCCR358RDLU37 0.011 (0.024)
Shaft couplings
XCCRASpppp
e
XCC e s
XCCRAS1008 10 8
6
9
XCCRAS1010 10 10
XCCRAS1012 10 12
35
9
7 21
Anti-rotation device Reduction collars

XCCRF5B XCCR358RDLpp
Mounting on 58 mm CANopen and Profibus-DP For CANopen and Profibus-DP encoders
encoders XCC3510pppFBN, XCC3510pppCBN,
XCC3515CpppFBN, XCC3515CpppCBN
8 63 1
6
1
9.9
15 h7
29.5 X F7
1
(1)
9
52.5
35
10
72

XCC
3.5 XCCR358RDL06 6 mm
XCCR358RDL08 8 mm
XCCR358RDL10 10 mm
XCCR358RDL12 12 mm
3.2 14.5 9
10
20 XCCR358RDL14 14 mm
20 XCCR358RDLU37 0.375 in.
53 XCCR358RDLU50 0.5 in.
(1) 4 holes 3.2. M3 x 6 screw mountings.
50
Telemecaniqe Sensors www.tesensors.com
Schneider Electric USA, Inc. The information and dimensions in this catalog are provided for the convenience of our
1875 Founders Drive customers. While this information is believed to be accurate, Schneider Electric reserves the right
Dayton, Ohio 45420 to make updates and changes without prior notification and assumes no liability for an errors or
(800) 435-2121 omissions.
www.tesensors.us
Schneider Electric Canada,
9006CT1101R02/12 April 2012. Replaces 9006CT1101 dated June 2011.
Inc.
5985 McLaughlin Road
Mississauga, Ontario L5R 1B8
(800) 435-2121
2012 Schneider Electric. All Rights Reserved.
www.tesensors.ca

9006ct1101 Encoders

Uploaded by

Copyright:

Available Formats

9006ct1101 Encoders

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

9006ct1101 Encoders

Uploaded by

Copyright:

Available Formats

Osisense XCC

b 58 mm encoders, Type XCC15 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

b Food and Beverage: 58 mm encoders, Type XCC15, stainless steel . . . . . . . . 14

b 90 mm encoders, Type XCC19 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Single turn absolute encoders

b 90 mm encoders, Type XCC29. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Multi-turn absolute encoders 4

b 58 mm encoders, Type XCC35, stainless steel . . . . . . . . . . . . . . . . . . . . . . . 28

b 90 mm encoders, Type XCC39. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Connection and mounting

b Mounting and installation accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Encoder type Incremental encoders

1 Applications Counting indication

Shaft Solid 6 mm 6 mm and 10 mm 10 mm 12 mm

Output Incremental Type R (N) 5 V, RS-422, 5 V, RS-422,

Connection Pre-cabled, radial p

Catalog Numbers XCC14ppppp XCC15ppppp XCC15ppppMppp XCC19ppppp

10 (2) Specifications of the output stage/supply types:

58 mm 90 mm 58 mm 90 mm 58 mm - Shaft couplings with

8192 ppr 8192 ppr 6

XCC25ppppp XCC29ppppp XCC35ppppp XCC39ppppp XCC35pppppCBN XCCR, XCCP, XZC

(2) Specifications of the output stage/supply types (continued):

Incremental encoder Principle

Wiring and settings

Period: 360 electrical.

Triple light source emission improves reliability

Absolute encoder (continued) Binary coding

5 Example of Gray code disc

Advantages of position detection by an absolute encoder

Specifications required to define an encoder

7 specifications to be established 1 Function

b Multi-turn absolute encoder

b Single turn and multi-turn absolute encoders

Cable Deserialization b Multi-turn absolute encoders, communicating version, fieldbus:

Specifications required to define an encoder

Installation considerations Type of cables

For the signals, we recommend using standard 0.14mm2/0.22mm2 conductors.

For 5V supply encoders.

In environments subject to electrical interference, we recommend grounding the

Specifications required to define an encoder,

Connection and power-up Connection

Fast transients Conforming to IEC 61000-4-4: level 3, 2kV (1 kV for inputs/outputs)

High level (Is = 20 mA) 2.5 V min.

7 Supply voltage c 1130 V

8 High level (Is = 20 mA) V supply 3 V min.

Resolution Connection Output stage Supply voltage Catalog number Weight

360 ppr Pre-cabled, 5 V, RS-422 4.55.5 V XCC1406PR03R 0.355 (0.787)

1000 ppr Pre-cabled, 5 V, RS-422 4.55.5 V XCC1406PR10R 0.355 (0.787)

method type (1) kg (lb)

360 ppr Pre-cabled, 5 V, RS-422 4.55.5 V XCC1406TR03R 0.405 (0.893)

1000 ppr Pre-cabled, 5 V, RS-422 4.55.5 V XCC1406TR10R 0.405 (0.893)

6 Supply voltage c 4.7530 V

7 High level (Is = 20 mA) 4.5 V min.

(1) RS-422 compatible on 5 V supply.

360 ppr Connector, 5 V, RS-422 4.7530 V XCC1506PS03X 0.495 (1.091)

1000 ppr Connector, 5 V, RS-422 4.7530 V XCC1506PS10X 0.495 (1.091)

2500 ppr Connector, 5 V, RS-422 4.7530 V XCC1506PS25X 0.495 (1.091)

360 ppr Connector,

Cable 2m Push-pull 530 V XCC1510SPA03Y (3) 0.600 (1.300)