Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

As Built Electronics Plan: General Notes

Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

GENERAL NOTES:

1. ALL ELECTRONIC WORKS HERE IN LEGEND AND TERMS:


SHALL BE DONE IN ACCORDANCE 1. CCTV CAMERA
WITH PROVISION OF THE LOCAL
ENFORCING AUTHORITIES AND 2. DVR - M MONITOR
THE REQUIREMENTS OF THE
UTILITY TELEPHONE COMPANY.
M DVR

2. ALL ELECTRONIC WORKS HERE IN TAPPED TO CCTV


INCLUDE SHALL BE EXECUTED BY CEILING LINE
220 VOLTS MONITOR
PERSONNEL WITH ELECTRICAL NEAREST OUTLET (4-CHANNELS INPUT)

EXPERIENCE UNDER THE DIRECT CCTV 1


3 2
5 4
SUPERVISION OF A FULL TIME 6
LICENSED ELECTRONIC
ENGINEER. WORKS SHALL BE
HEALTHY PLACED SECURELY
FINISH FLOOR LINE
FASTENED AND PROPERLY
LICENSED.

3. THE CONTRACTOR SHALL VERIFY


AND ORIENT THE ACTUAL
LOCATION OF TAPPING POINT SECURITY CCTV SYSTEM DIAGRAM (CCTV)
FOR CONNECTION TO
COMMUNICATION SUPPLY.

4. ALL MATERIALS SHALL BE BRAND


NEW AND SHALL CONFORM WITH
THE PROVISION OF THE UNDER
WRITERS LABORATORIES INC. IN
EVERY CASE WHERE SUCH A
STANDARD HAS BEEN
ESTABLISHED.

5. ALL CONDUITS MUST BE


PROTECTED AGAINST DAMAGE
TV
BY THE ENTRANCE OF WATER CC
10800

AND FOREIGN MATTERS DURING


CONSTRUCTION. ALL ENDS OF
DVR-M
CONDUITS SHALL BE PLUGGED
TO INCLUDE MOISTURE AND DUST
IMMEDIATELY AFTER THE
CONDUITS ARE PLACED.

6. UNLESS OTHERWISE SPECIFIED,


ALL ELECTRONIC WIRING
INSTALLATION SHALL BE USED
RSC. THE MINIMUM SIZE OF
CONDUIT SHALL BE 15MM DIA.

7. ALL RACEWAYS WALL AND FLOOR 28500


PENETRATIONS SHALL BE
PROVIDED WITH FIRE BARRIER OF
THE APPROVED TYPE. GROUND FLOOR LAYOUTPLAN
SCALE: 1:120 MTS

SIGN AND SEALED: PROJECT TITLE: APPROVED BY: SHEET CONTENT: SHEET NO:

PRC NO.
PROFESSIONAL ELECTRICAL ENGINEER:

VALIDITY:
AS BUILT ELECTRONICS PLAN EDGAR VERNA ENTERPRISES
O W N E R
GROUND FLOOR LAYOUT PLAN
SECURITY CCTV SYSTEM
DIAGRAM
ECE-1
PTR NO. TIN:
IAPOA NO. DATE: PLACE: LOCATION: TACLOBAN CITY, LEYTE

You might also like