Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 21 views

    Mechanics of Materials II:: Thin-Walled Pressure Vessels and Torsion

    Uploaded by

    Wolf Lord
    1) The document discusses inelastic torsion of straight cylindrical shafts and describes a problem involving a composite torsion bar made of an aluminum core surrounded by steel. 2) It provides idealized shear stress-strain diagrams for steel and aluminum and shows the equations used to calculate the torque required for the aluminum to just begin yielding. 3) The calculation determines that the elastic torque in the aluminum is 3,436,000 N*mm and defines the equations needed to calculate the plastic torque in the steel.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Mechanics of Materials II:: Thin-Walled Pressure Vessels and Torsion

    Uploaded by

    Wolf Lord
    21 views7 pages
    1) The document discusses inelastic torsion of straight cylindrical shafts and describes a problem involving a composite torsion bar made of an aluminum core surrounded by steel. 2) It provides idealized shear stress-strain diagrams for steel and aluminum and shows the equations used to calculate the torque required for the aluminum to just begin yielding. 3) The calculation determines that the elastic torque in the aluminum is 3,436,000 N*mm and defines the equations needed to calculate the plastic torque in the steel.

    Original Description:

    Module 22

    Original Title

    Mom II Module 22

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    1) The document discusses inelastic torsion of straight cylindrical shafts and describes a problem involving a composite torsion bar made of an aluminum core surrounded by steel. 2) It provides idealized shear stress-strain diagrams for steel and aluminum and shows the equations used to calculate the torque required for the aluminum to just begin yielding. 3) The calculation determines that the elastic torque in the aluminum is 3,436,000 N*mm and defines the equations needed to calculate the plastic torque in the steel.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    21 views7 pages

    Mechanics of Materials II:: Thin-Walled Pressure Vessels and Torsion

    Uploaded by

    Wolf Lord
    1) The document discusses inelastic torsion of straight cylindrical shafts and describes a problem involving a composite torsion bar made of an aluminum core surrounded by steel. 2) It provides idealized shear stress-strain diagrams for steel and aluminum and shows the equations used to calculate the torque required for the aluminum to just begin yielding. 3) The calculation determines that the elastic torque in the aluminum is 3,436,000 N*mm and defines the equations needed to calculate the plastic torque in the steel.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 7

    Mechanics of Materials II:

    Thin-Walled Pressure Vessels and Torsion


    Dr. Wayne Whiteman
    Senior Academic Professional and Director of the Office of Student Services
    Woodruff School of Mechanical Engineering
    Module 22 Learning Outcome
    Solve a problem for the inelastic torsion of
    straight cylindrical shafts
    Inelastic Torsion of Straight Cylindrical Shafts
    You decide to do some tests regarding a new torsion bar design.
    To start this initiative you decide to do an analysis.

    Steel

    Aluminum
    Inelastic Torsion of Straight Cylindrical Shafts
    Idealized Shear Stress-Strain Diagrams

    Steel

    Aluminum

    Worksheet:

    A composite torsion bar is made of an aluminum core surrounding by


    steel. The aluminum and steel are perfectly bonded together. A torque,
    T, is applied at a magnitude where the aluminum just begins to yield.
    a) Determine the torque, T, required for the aluminum to just begin
    yielding.
    Inelastic Torsion of Straight Cylindrical Shafts
    Idealized Shear Stress-Strain Diagrams

    Worksheet:
    A composite torsion bar is made of an aluminum core surrounding by steel. The aluminum
    and steel are perfectly bonded together. A torque, T, is applied at a magnitude where the
    aluminum just begins to yield.
    a) Determine the torque, T, required for the aluminum to just begin yielding.

    MAX STEEL YIELD ALUM



    rOUTER rELASTIC ALUM
    Inelastic Torsion of Straight Cylindrical Shafts
    Idealized Shear Stress-Strain Diagrams

    Worksheet:
    A composite torsion bar is made of an aluminum core surrounding by steel. The aluminum
    and steel are perfectly bonded together. A torque, T, is applied at a magnitude where the
    aluminum just begins to yield.
    a) Determine the torque, T, required for the aluminum to just begin yielding.

    TTOTAL TELASTIC TPLASTIC


    ALUMINUM STEEL

    YIELD J ELASTIC

    ALUMINUM REGION
    TELASTIC
    ALUMINUM rELASTIC

    140 MPa 25 mm4


    TELASTIC 2 3,436,000 N mm
    ALUMINUM 25 mm
    Inelastic Torsion of Straight Cylindrical Shafts
    Idealized Shear Stress-Strain Diagrams

    Worksheet:
    A composite torsion bar is made of an aluminum core surrounding by steel. The aluminum
    and steel are perfectly bonded together. A torque, T, is applied at a magnitude where the
    aluminum just begins to yield.
    a) Determine the torque, T, required for the aluminum to just begin yielding.

    TTOTAL TELASTIC TPLASTIC


    ALUMINUM STEEL

    TELASTIC 3,436,000 N mm
    ALUMINUM

    2
    TPLASTIC YIELD rOUTER
    3
    3

    rELASTIC
    3

    STEEL STEEL

    You might also like