Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 88 views

    FP200 FR Expanding Foam: Abesco

    Uploaded by

    Irfan Ali
    This document provides information on Abesco FP200 FR Expanding Foam, a single-pack fire-rated polyurethane foam designed to prevent the spread of fire through gaps in fire-rated walls and floors. It adheres well to common building materials and provides a strong, semi-rigid seal unaffected by moisture. The foam is easy to install and finish, expands to fill voids, and has been tested to provide up to 4 hours of fire resistance according to various standards. Physical and performance properties are also listed.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    FP200 FR Expanding Foam: Abesco

    Uploaded by

    Irfan Ali
    88 views2 pages
    This document provides information on Abesco FP200 FR Expanding Foam, a single-pack fire-rated polyurethane foam designed to prevent the spread of fire through gaps in fire-rated walls and floors. It adheres well to common building materials and provides a strong, semi-rigid seal unaffected by moisture. The foam is easy to install and finish, expands to fill voids, and has been tested to provide up to 4 hours of fire resistance according to various standards. Physical and performance properties are also listed.

    Original Description:

    rt

    Original Title

    Fire Stop FP 200

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides information on Abesco FP200 FR Expanding Foam, a single-pack fire-rated polyurethane foam designed to prevent the spread of fire through gaps in fire-rated walls and floors. It adheres well to common building materials and provides a strong, semi-rigid seal unaffected by moisture. The foam is easy to install and finish, expands to fill voids, and has been tested to provide up to 4 hours of fire resistance according to various standards. Physical and performance properties are also listed.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    88 views2 pages

    FP200 FR Expanding Foam: Abesco

    Uploaded by

    Irfan Ali
    This document provides information on Abesco FP200 FR Expanding Foam, a single-pack fire-rated polyurethane foam designed to prevent the spread of fire through gaps in fire-rated walls and floors. It adheres well to common building materials and provides a strong, semi-rigid seal unaffected by moisture. The foam is easy to install and finish, expands to fill voids, and has been tested to provide up to 4 hours of fire resistance according to various standards. Physical and performance properties are also listed.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    FP200 FR Expanding Foam

    technical datasheet
    Extremely versatile solution Paintable and stainable

    CFC free Easily trimmed after curing

    Excellent fill capabilities Excellent adhesion to most building


    substrates
    Very easy to install and finish
    Unaffected by moisture or humidity
    Excellent smoke and draft seal when cured
    capabilities
    Cures to provide a strong semi-rigid
    Sound dampening capabilities seal

    Product Description Testing and Performance Data


    Abesco FP200 FR Expanding Foam is a single pack fire
    rated polyurethane expanding foam, and is designed
    to prevent the spread of fire and smoke from one
    compartment to another through construction joints,
    gaps and voids or openings for service penetrations in
    fire rated walls and floors, and provides up to 4 hours
    fire resistance.

    Abesco FP200 FR Expanding Foam has excellent


    adhesion properties to most common building surfaces
    and when cured provides a strong semi-rigid fire rated Tested in accordance with the methodology
    seal. Once fully expanded and cured, Abesco FP200 FR and criteria described in:
    Expanding Foam is unaffected by moisture and does not BS 476-20 (up to 4 hours)
    degrade in high humidity conditions. Abesco FP200 FR EN 1366-3 (up to 4 hours)
    ASTM E-814 / UL 1479
    Expanding Foam is an extremely versatile product and (Classified 1 & 2 hour systems)
    as such is well suited for use in a wide range of other ASTM E-84 (Flame 10, Smoke 35)
    applications. ASTM E-662 | ASTM E-162

    FILL VOID OR CAVITY MATERIALS


    FOR USE IN THROUGH PENETRATION
    FIRESTOP SYSTEMS SEE UL
    DIRECTORY OF PRODUCTS
    CERTIFIED FOR CANADA AND UL
    FIRE RESISTANCE DIRECTORY 86JY

    abesco
    Abesco LLC Tel: 888-FIRESTP Basic Abesco Product Groups :
    9561 Satellite Blvd. Tel: 407-851-3300
    Unit 325 Email: ustechnical@abesco.net FR Sealants FR Expanding Foam
    Orlando, FL 32837 Web: www.abesco.net Cable Transit Devices FR Mortar
    USA www.FP200abesco.com Pipe Collars FR Putty

    Application Physical Properties
    Abesco FP200 FR Expanding Foam is suitable for use in most Application temperature: minimum 5C (41F) (surfaces),
    buildings where a seal is required for through penetrations in fire rated 20C-25C (68F-77F) (Can)
    floors and walls. It has excellent adhesion to various surfaces like Can must be inverted for dispensing
    concrete, brick, wood, metal, aluminum and steel. It has no adhesion Flammable during dispensing
    to polyethene, silicone and teflon. Easy wet cleanup using Acetone,
    Tack free time: 5 - 10 minute, depending on temperature and
    M.E.K., & Lacquer Thinner. humidity

    Installation Methods Cure time: 20 - 25 minutes 38mm (1.5 Dia.), depending on


    temperature and humidity
    1. Ensure surfaces are firm and free of dust, loose particles and
    Hardening time: 1.5 5 hours, depending on temperature and
    grease.
    humidity
    2. As Abesco FR Foam dries by moisture absorption, all surfaces Foam when cured has around 60% closed cell content
    should be moistened well with water before application of the foam. Specific gravity : 22 26 kg/m3
    Water absorption: maximum 1 % volume
    3. Shake the can thoroughly 15 - 20 times. Attach the adapter to the
    Temperature resistance: - 40C to + 90C (- 40F to + 194F)
    can, taking care not to over-tighten or activate the valve during this
    process. Tensile strength: 0,071 - 0,076 MPa
    Elongation at break: 15 - 20 %
    4. The can should be turned upside down with the adapter and valve Free expansion: 120%
    pointing downwards for application of the foam. The best application
    Flame and smoke index: 10 & 35, Class A Rating
    temperature is 68 - 77F (20 - 25C)
    Flammability class: B1 according to DIN 4102, part 1
    5. The foam should be applied into gaps and openings from the Storage: 1 to 1.5 years 10C to 20C (+50F to +68F)
    bottom first, working up as each layer is allowed to part cure. Care Higher and lower temperatures can shorten storage life. Must be
    must be taken not to insert excessive quantities of foam at one time in vertical position (upright).
    as the rapid expansion will lead to overspill and unwanted post VOC: 186.1 g/L in can, less than 2 g/L cured (10+ days)
    expansion. Foam extrusion can be controlled accurately by varying
    STC: 38
    the pressure or side to side and tilting the adapter. The applied
    Dielectric Constant (relative static permittivity) 1.2
    volume of foam will expand 2-3 times its original volume, therefore
    the foam should be inserted into a maximum 50% of the volume to be R: 7/inch (2.54 cm)
    filled. Avoid emptying the entire can onto a enclosed location without Asbestos free
    moving the nozzle to obtain even filling, this will help with even curing
    and eliminate liquid or un-foamed voids.
    Ordering Information - Worldwide
    6. Moisture is needed to ensure rapid and even curing of the foam
    Item Case Qty. Color Size
    and care must be taken to ensure surfaces are kept moist during
    20424 12 Pink 24 oz.
    application (a watering spray for plants is a good tool to use for this
    20410 12 Pink 10 oz.
    purpose). This is especially important for hot or dry climates.
    Pallet quantity of 24 oz. cans: 816
    7. After 12 hours, hardened foam can be cut or sawed away with Pallet quantity of 10 oz. cans 1,500
    a small saw or knife to leave a neat finish. Painting or staining with
    acrylic or latex based paints or stains can be done. Product should be shipped ground or ocean for easiest transport

    abesco
    Abesco LLC Tel: 888-FIRESTP As part of our policy of ongoing improvement, we reserve the right to modify, alter or change product
    531 West Grant St. Tel: 407-851-3300 specifications without giving notice. Product illustrations are representations only. All information
    Orlando, Florida Fax: 407-851-3388 contained in this document is provided for guidance only, and as Abesco has no control over the
    installation methods of the products, or of the prevailing site conditions, no warranties expressed or
    32805 USA Email: ustechnical@abesco.net
    implied are intended to be given as to the actual performance of the products mentioned or referred
    Web: www.abesco.net to, and no liability whatsoever will be accepted for any loss, damage or injury arising from the use
    of the information given of products mentioned or referred to herein.
    E1 Rev 2

    You might also like