TECO Motors
TECO Motors
TECO Motors
Advantage+
CAST IRON
Standard efficiency and Premium efficiency totally
enclosed fan cooled cage induction motors
CAST IRON
TECO offers a total performance package of
cast iron motors, from normal standard
efficiency up to high performance premium
efficiency.
Introduction
OVERLOAD PROTECTION
3
All motors of frame size D132 and above are fitted
with 3 x thermistors (1 per phase rated 160C).
MOUNTING PAINT
Cast Iron motor range is available with various Normal paint finish is a High Build primer and topcoat
mounting options: of 50 microns dry film thickness in Grey to Munsell
Foot Mounted without flange = B3 - IM 1001 7.5BG4/2 for EFF2 and in black to RAL 9011 for EFF1
Flange mounted = B5 - IM 3001 or V1 - IM 3011 motors.
Foot Mounted with D Flange = B35 - IM 2001
Foot mounted motors with C face = B34 - IM 2101 NAMEPLATE
(up to 160 frame) All nameplates are stainless steel.
C face mounted motors = B14 - IM 3601
(up to 160 frame) OPTIONS
Pad Mount (IM9201) TECO offer the following optional extras, details of
which are available upon request:
INSULATION IP56 and IP65 enclosures
TECO cast iron motors have Class F insulation. The Anti-condensation heaters
normal temperature rise is Class B, 80C above an Tropic proofing
ambient temperature of up to 40C and at an altitude Special paint finishes
of less than 1000m above sea level. Pad mounting
Mechanical brakes
CONSTRUCTION Smoke extraction motors high temperature
Frames, endshields and terminal box assemblies are Special shaft extensions
manufactured from high-grade cast iron. Class H Insulation
The Fan is propylene and suitable for bi-directional Dual speed
rotation. The Fan Cover is made from heavy gauge Stainless steel hardware
steel. The Rotor is manufactured from pressure die Encoder/Tacho kits
cast aluminium or brazed copper bar. Force Ventilation kits
Oversize terminal box
BEARINGS
Motors up to and including 180L frame sizes are fitted
with double shielded bearings greased for life. Larger
frame sizes are fitted with pressure grease relief
systems on the bearings.
lE1
Instructions
Data
0.55kW-18.5kW TEFC, CLASS F INSULATION, S1 (MCR) DUTY
Current (amp) Efficiency (%) Power Factor D.O.L. D.O.L. Break Rotor Max load Weight
Full Frame Rated at volts at load at load Starting Starting down inertia inertia B3
Speed No. Torque current Torque Torque mr2 mr2
kW (RPM) (Nm) (%FLC) (%FLT) (%FLT) (kg.m2) (kg.m2) Kg
Performance
0.55 1390 D80 3.78 1.57 1.49 1.44 70.0 71.0 62.0 0.76 0.66 0.54 510 270 295 0.0013 0.033 15
0.55 893 D80 5.88 1.63 1.55 1.50 70.2 70.3 60.0 0.73 0.63 0.48 370 230 240 0.0020 0.060 16
0.55 688 D90L 7.63 1.65 1.56 1.51 72.6 72.8 65.0 0.70 0.61 0.46 370 183 205 0.0040 0.140 26
0.75 2825 D80 2.53 1.71 1.63 1.57 78.3 76 68.0 0.85 0.78 0.55 770 320 340 0.0008 0.012 15
0.75 1385 D80 5.17 2.03 1.93 1.86 73.0 71.0 65.0 0.77 0.67 0.54 481 280 288 0.0015 0.038 16
Assembly
0.75 942 D90S 7.60 2.07 1.97 1.90 77.1 76.1 62.0 0.71 0.62 0.48 457 206 250 0.0030 0.090 23
0.75 700 D100L 10.20 2.41 2.29 2.21 72.5 71.4 69.0 0.65 0.57 0.46 386 187 225 0.0063 0.221 33
1.1 2880 D80 3.65 2.50 2.38 2.29 79.6 78.7 74.9 0.84 0.76 0.63 720 310 320 0.0010 0.015 16
1.1 1385 D90S 7.58 2.81 2.67 2.57 76.2 75.3 72.0 0.78 0.70 0.57 492 226 253 0.0020 0.050 22
1.1 937 D90L 11.20 3.12 2.97 2.86 77.8 77.1 69.0 0.69 0.60 0.48 462 247 285 0.0040 0.120 25
1.1 694 D100L 15.10 3.30 3.14 3.03 76.3 76.1 73.0 0.66 0.58 0.48 404 217 235 0.0097 0.340 34
1.5 2840 D90S 5.04 3.50 3.32 3.20 79.7 79.5 76.6 0.82 0.76 0.65 640 310 315 0.0012 0.018 22
1.5 1410 D90L 10.20 3.79 3.60 3.47 78.7 78.7 75.5 0.77 0.69 0.55 600 235 300 0.0030 0.075 27
1.5 918 D100L 15.60 3.96 3.76 3.63 75.6 76.7 71.5 0.76 0.69 0.50 450 212 233 0.0069 0.207 33
1.5 703 D112M 20.40 4.56 4.33 4.18 74.7 73.8 73.0 0.67 0.58 0.48 413 178 236 0.0120 0.420 39
2.2 2840 D90L 7.40 4.78 4.54 4.38 81.1 81.7 79.9 0.86 0.82 0.73 620 310 314 0.0014 0.014 25
2.2 1420 D100L 14.80 5.12 4.86 4.69 81.0 79.9 77.0 0.81 0.74 0.61 638 290 310 0.0054 0.081 34
2.2 944 D112M 22.30 5.33 5.06 4.88 81.8 81.8 73.0 0.77 0.69 0.51 547 216 271 0.0071 0.178 39
2.2 698 D132S 30.10 5.35 5.08 4.90 82.2 83.1 76.0 0.76 0.68 0.50 448 215 255 0.0290 0.870 62
3 2850 D100L 10.10 6.30 5.99 5.77 83.2 83.5 81.8 0.87 0.83 0.74 760 290 354 0.0029 0.029 33
4
3 1420 D100L 20.2 6.68 6.35 6.12 82.6 81.9 79.4 0.84 0.75 0.62 670 280 365 0.0067 0.101 35
3 970 D132S 29.5 7.40 7.03 6.78 81.0 79.6 75.2 0.76 0.66 0.52 640 210 245 0.0274 0.685 56
3 710 D132M 40.3 7.70 7.31 7.05 80.8 81.1 78.7 0.73 0.64 0.50 520 200 325 0.0380 1.140 66
4 2880 D112M 13.3 7.66 7.28 7.01 85.7 86.8 86.1 0.93 0.90 0.83 750 210 339 0.0050 0.050 40
4 1430 D112M 26.7 8.73 8.29 7.99 84.7 85.0 84.4 0.83 0.76 0.64 700 230 342 0.0091 0.137 44
4 960 D132M 39.8 9.70 9.22 8.89 83.5 82.6 79.2 0.75 0.67 0.54 700 210 250 0.0343 0.858 71
4 720 D160M 53.0 9.82 9.33 8.99 82.3 82.7 80.6 0.75 0.68 0.55 530 180 283 0.0649 1.947 94
5.5 2910 D132S 18.1 10.9 10.4 10.0 86.7 86.1 83.9 0.89 0.86 0.77 880 230 377 0.0104 0.104 59
5.5 1445 D132S 36.3 11.7 11.1 10.7 85.7 85.4 82.7 0.83 0.78 0.63 750 210 320 0.0205 0.308 61
5.5 960 D132M 54.7 12.7 12.0 11.6 85.5 85.2 82.8 0.77 0.68 0.55 750 200 413 0.0431 1.078 75
5.5 720 D160M 72.9 13.1 12.4 12.0 84.5 84.9 82.8 0.76 0.68 0.55 600 210 331 0.0821 2.463 106
7.5 2880 D132S 24.9 14.5 13.8 13.3 87.3 87.7 87.3 0.90 0.87 0.80 680 200 355 0.0121 0.121 62
7.5 1452 D132M 49.3 15.2 14.5 13.9 87.0 87.3 86.2 0.86 0.81 0.73 750 200 349 0.0296 0.444 73
7.5 970 D160M 73.8 16.8 15.9 15.3 85.3 85.1 82.6 0.80 0.74 0.63 650 187 349 0.0800 2.000 108
7.5 720 D160L 99.5 17.1 16.3 15.7 86.1 86.9 85.8 0.77 0.70 0.57 600 210 340 0.1141 3.423 128
11 2935 D160M 35.8 21.0 19.9 19.2 88.8 88.5 86.1 0.90 0.87 0.81 740 240 326 0.0370 0.370 107
11 1460 D160M 71.9 22.2 21.1 20.3 88.4 88.5 88.0 0.85 0.81 0.72 710 210 285 0.0724 1.086 113
11 970 D160L 108.0 23.4 22.2 21.4 87.8 88.0 86.4 0.81 0.75 0.66 690 195 333 0.1080 2.700 131
11 720 D180L 146.0 24.7 23.4 22.6 87.5 87.8 86.4 0.77 0.70 0.57 670 150 297 0.1870 5.610 170
15 2935 D160M 48.8 28.2 26.8 25.8 89.8 89.6 87.7 0.90 0.89 0.81 790 240 327 0.0432 0.432 117
15 1460 D160L 98.1 28.8 27.3 26.4 90.3 90.9 89.0 0.88 0.84 0.77 730 210 333 0.0929 1.394 133
15 970 D180L 148.0 30.8 29.3 28.2 89.5 89.8 88.5 0.83 0.78 0.67 660 213 303 0.1670 4.175 171
15 730 D200L 196.0 32.9 31.2 30.1 89.1 89.2 87.5 0.78 0.71 0.59 650 180 298 0.3250 9.750 220
18.5 2935 D160L 60.2 33.9 32.2 31.0 91.1 91.2 89.3 0.91 0.89 0.83 800 260 336 0.0525 0.368 134
18.5 1467 D180M 120.0 35.8 34.0 32.8 90.3 90.4 89.1 0.87 0.83 0.74 700 220 315 0.1350 1.350 167
18.5 975 D200L 181.0 37.2 35.4 34.1 89.9 90.1 88.9 0.84 0.79 0.68 670 213 329 0.3020 3.624 216
18.5 730 D225S 242.0 40.5 38.5 37.1 90.1 90.2 88.5 0.77 0.71 0.60 800 200 300 0.4810 7.215 270
NOTES
1. Data is based on tests to EN60034.
2. Tolerance: EN60034.
3. All data is subject to change without prior notification.
Not to be used for installation purposes without
referring to TECO Electric Europe Limited.
lE1
Performance Data
22kW-315kW TEFC, CLASS F INSULATION, S1 (MCR) DUTY
Current (amp) Efficiency (%) Power Factor D.O.L. D.O.L. Break Rotor Max load Weight
Full Frame Rated at volts at load at load Starting Starting down inertia inertia B3
Speed No. Torque current Torque Torque mr2 mr2
kW (RPM) (Nm) (%FLC) (%FLT) (%FLT) (kg.m2) (kg.m2) Kg
380 400 415 100% 75% 50% 100% 75% 50%
22 2945 D180M 71.3 40.3 38.3 36.9 90.6 90.4 88.9 0.92 0.90 0.84 770 250 344 0.0710 0.497 169
22 1465 D180L 143.0 41.6 39.5 38.1 91.3 91.6 91.0 0.89 0.84 0.76 690 220 309 0.1360 1.360 181
22 975 D200L 215.0 43.9 41.7 40.2 89.9 90.3 89.1 0.85 0.81 0.72 670 217 316 0.3420 4.104 225
22 730 D225M 288.0 47.9 45.5 43.9 90.6 90.7 89.4 0.77 0.72 0.62 770 210 301 0.5310 7.965 295
30 2950 D200L 97.1 54.9 52.2 50.3 91.4 91.3 89.6 0.91 0.89 0.82 750 260 346 0.1190 0.833 220
30 1465 D200L 196.0 55.8 53.1 51.1 91.8 92 91.4 0.89 0.85 0.74 700 230 300 0.2450 2.450 232
30 980 D225M 292.0 58.3 55.4 53.4 91.8 92.0 90.6 0.85 0.82 0.75 620 235 284 0.5250 6.300 286
30 730 D250M 392.0 61.0 57.9 55.9 90.8 90.8 89.2 0.82 0.77 0.65 582 198 298 0.8090 12.135 370
37 2950 D200L 120.0 66.9 63.6 61.3 92.1 92.0 91.0 0.91 0.89 0.87 750 220 298 0.1330 0.931 239
37 1475 D225S 240.0 69.8 66.3 63.9 92.1 92.7 91.2 0.88 0.86 0.78 660 220 306 0.3900 3.900 287
37 980 D250M 360.0 70.8 67.2 64.8 91.5 91.4 89.9 0.87 0.83 0.75 690 212 323 0.8070 9.684 380
37 735 D280S 481.0 77.8 73.9 71.2 91.5 91.5 89.5 0.79 0.71 0.65 660 200 240 1.3810 20.715 475
45 2960 D225M 145.0 81.8 77.7 74.9 92.5 92.1 91.0 0.90 0.88 0.82 790 270 369 0.2210 1.547 297
45 1475 D225M 291.0 84.1 79.9 77.0 92.5 92.3 91.5 0.88 0.85 0.77 740 200 314 0.4500 4.500 322
45 980 D280S 438.0 85.9 81.7 78.7 92.5 92.3 90.0 0.86 0.83 0.75 700 230 270 1.3340 16.008 465
45 735 D280M 585.0 94.1 89.4 86.1 92.0 91.8 89.5 0.79 0.71 0.65 660 200 240 1.7210 25.815 555
55 2965 D250M 177.0 101 95.7 92.2 93.0 92.1 90.3 0.89 0.86 0.80 770 190 368 0.3050 2.135 380
55 1475 D250M 356.0 101 96.0 92.6 93.0 92.8 91.3 0.90 0.86 0.79 700 215 310 0.6400 6.400 385
55 980 D280M 536.0 105 99.5 95.9 92.8 92.5 90.5 0.86 0.83 0.75 700 230 270 1.5980 19.176 540
55 735 D315S 714.0 111 106 102 92.8 92.7 90.0 0.81 0.71 0.65 660 180 220 4.5900 68.850 905
5
75 2971 D280S 241.0 134 128 123 93.3 92.9 91.2 0.91 0.89 0.86 640 220 310 0.5840 2.920 510
75 1485 D280S 482.0 137 130 126 94.2 94.2 93.2 0.88 0.86 0.79 730 250 350 1.0450 7.315 510
75 985 D315S 766.0 142 135 130 93.5 93.2 91.0 0.86 0.83 0.75 700 200 240 3.9400 39.400 861
75 740 D315M 974.0 151 144 139 93.0 92.8 90.2 0.81 0.72 0.65 660 180 220 5.3600 64.320 981
90 2965 D280M 290.0 159 152 146 93.7 93.5 92.7 0.92 0.90 0.86 700 230 330 0.6650 3.325 540
90 1484 D280M 579.0 162 154 148 94.4 94.2 93.0 0.89 0.88 0.81 700 240 330 1.3960 9.772 600
90 985 D315M 919.0 170 161 155 93.8 93.5 91.2 0.86 0.83 0.76 700 200 240 4.5800 45.800 940
90 740 D315L 1169.0 178 169 163 93.8 93.5 90.3 0.82 0.72 0.65 660 180 230 6.1100 73.320 1070
110 2975 D315S 353.0 195 186 179 94.0 93.5 91.9 0.91 0.89 0.86 640 180 290 1.1300 5.650 920
110 1485 D315S 707.0 201 191 184 94.5 94.2 93.0 0.88 0.85 0.80 590 190 290 2.9800 20.860 930
110 985 D315L 1123.0 207 196 189 94.0 93.7 91.4 0.86 0.83 0.76 700 210 240 5.2300 52.300 1110
110 740 D315L 1429.0 217 206 199 94.0 93.8 90.4 0.82 0.72 0.66 660 190 230 6.5500 78.600 1160
132 2975 D315M 424.0 233 222 214 94.5 94.5 93.4 0.91 0.89 0.87 590 170 280 1.7500 8.750 970
132 1485 D315M 849.0 240 228 220 94.8 94.5 93.1 0.88 0.86 0.81 560 185 285 3.4800 24.360 1010
132 985 D315L 1348.0 245 232 224 94.2 93.9 91.5 0.87 0.83 0.76 700 210 230 5.5400 55.400 1175
132 745 D355M 1692.0 262 249 240 93.5 93.2 90.4 0.82 0.73 0.66 650 190 200 10.4000 124.800 1700
160 2975 D315L 514.0 279 265 256 95.2 94.9 93.7 0.92 0.89 0.86 700 220 330 2.0100 10.050 1080
160 1485 D315L 1029.0 288 273 264 94.9 94.6 93.6 0.89 0.86 0.82 530 175 260 3.9600 27.720 1080
160 990 D355M 1543.0 291 277 267 94.8 94.5 91.7 0.88 0.84 0.76 700 170 200 8.8100 88.100 1620
160 745 D355M 2051.0 313 298 287 93.5 93.2 90.4 0.83 0.73 0.66 650 190 200 11.7000 140.400 1730
200 2975 D315L 642.0 348 331 319 95.0 94.9 93.8 0.92 0.89 0.87 590 170 290 2.2700 11.350 1170
200 1485 D315L 1286.0 359 341 329 95.2 95.2 94.5 0.89 0.86 0.81 600 220 290 4.4700 31.290 1170
200 990 D355M 1929.0 363 345 333 95.0 94.5 91.8 0.88 0.84 0.76 700 170 220 9.6300 96.300 1730
200 745 D355L 2563.0 386 367 354 94.8 94.5 91.0 0.83 0.74 0.67 650 190 220 12.8000 153.600 1970
250 2970 D355M 804.0 432 411 396 95.5 95.0 94.5 0.92 0.90 0.86 730 190 300 2.9700 14.850 1690
250 1490 D355M 1602.0 437 415 400 95.5 95.2 91.8 0.91 0.87 0.77 680 230 260 5.7500 40.250 1720
250 990 D355L 2411.0 449 427 411 95.0 94.5 91.0 0.89 0.84 0.67 700 190 230 10.5400 105.400 1820
315 2970 D355L 1013.0 543 516 497 95.8 95.3 94.8 0.92 0.90 0.86 730 160 270 4.1700 20.850 1860
315 1490 D355L 2019.0 549 522 503 95.8 95.5 92.0 0.91 0.88 0.77 680 230 260 6.7900 47.530 1870
NOTES
1. Data is based on tests to EN60034.
2. Tolerance: EN60034.
3. All data is subject to change without prior
notification. Not to be used for installation purposes
without referring to TECO Electric Europe Limited.
lE2
Performance Data
1.1kW-110kW TEFC, CLASS F INSULATION, S1 (MCR) DUTY
Current (amp) Efficiency (%) Power Factor D.O.L. D.O.L. Break Rotor Max load Weight
Full Frame Rated at volts at load at load Starting Starting down inertia inertia B3
Speed No. Torque current Torque Torque mr2 mr2 (dB(A))
kW (RPM) (Nm) (%FLC) (%FLT) (%FLT) (kg.m2) (kg.m2) Kg
380 400 415 100% 75% 50% 100% 75% 50%
1.1 2865 D80 3.67 2.42 2.30 2.22 84.1 84.9 83.5 0.82 0.76 0.64 740 305 315 0.0010 0.015 16
1.1 1420 D90S 7.40 2.69 2.55 2.46 84.0 84.8 83.3 0.74 0.65 0.50 660 330 345 0.0020 0.050 22
1.1 940 D90L 11.17 2.92 2.77 2.67 83.0 80.0 77.0 0.69 0.60 0.48 582 240 290 0.0040 0.120 25
1.5 2875 D90S 4.98 3.38 3.21 3.10 85.3 85.9 84.8 0.79 0.71 0.57 775 310 340 0.0012 0.018 22
1.5 1420 D90L 10.09 3.48 3.31 3.19 85.1 86.1 85.5 0.77 0.68 0.55 680 320 330 0.0030 0.075 27
1.5 930 D100L 15.40 3.54 3.37 3.25 83.5 83.0 81.5 0.77 0.72 0.60 623 240 250 0.0069 0.207 33
2.2 2865 D90L 7.33 4.65 4.42 4.26 85.6 86.5 85.5 0.84 0.77 0.65 810 330 340 0.0014 0.014 25
2.2 1440 D100L 14.59 4.88 4.63 4.46 86.5 86.7 85.6 0.79 0.72 0.58 793 299 353 0.0054 0.081 34
2.2 955 D112M 22.00 5.35 5.08 4.89 84.5 84.0 82.0 0.74 0.67 0.55 606 210 260 0.0071 0.178 39
3 2860 D100L 10.02 5.91 5.61 5.41 86.7 88.5 89.1 0.89 0.86 0.78 800 300 350 0.0029 0.029 33
3 1460 D100L 19.62 6.60 6.27 6.04 87.4 87.6 86.0 0.79 0.68 0.55 800 300 360 0.0067 0.101 35
3 965 D132S 29.69 6.73 6.39 6.16 88.0 87.6 83.0 0.77 0.75 0.63 741 200 300 0.0274 0.685 56
4 2880 D112M 13.3 7.48 7.11 6.85 88.0 89.2 88.9 0.92 0.90 0.85 720 210 330 0.0050 0.050 40
4 1445 D112M 26.4 8.58 8.15 7.86 88.5 88.7 87.3 0.80 0.74 0.61 650 240 340 0.0091 0.137 44
4 970 D132M 39.4 8.95 8.50 8.19 86.0 85.0 83.2 0.79 0.73 0.60 743 210 310 0.0343 0.858 71
5.5 2925 D132S 18.0 10.5 10.0 9.6 89.0 89.9 87.1 0.89 0.87 0.79 780 215 355 0.0104 0.104 59
5.5 1455 D132S 36.1 11.6 11.0 10.6 89.4 89.9 89.3 0.81 0.75 0.64 740 240 330 0.0205 0.308 61
5.5 960 D132M 54.7 12.2 11.6 11.1 87.0 86.0 84.0 0.79 0.77 0.66 654 190 270 0.0431 1.078 75
7.5 2925 D132S 24.5 14.5 13.7 13.2 90.0 90.0 88.5 0.88 0.84 0.74 795 205 390 0.0121 0.121 62
7.5 1460 D132M 49.1 15.3 14.5 14.0 90.3 90.9 90.3 0.83 0.77 0.65 781 250 380 0.0296 0.444 73
6
7.5 970 D160M 73.8 16.2 15.4 14.8 89.0 89.0 87.0 0.79 0.75 0.64 674 240 260 0.0800 2.000 108
11 2945 D160M 35.7 20.4 19.4 18.7 91.0 90.8 89.2 0.90 0.88 0.82 750 218 349 0.0370 0.370 107
11 1465 D160M 71.7 21.8 20.7 20.0 90.9 91.6 91.0 0.84 0.82 0.75 695 208 281 0.0724 1.086 113
11 975 D160L 107.7 23.8 22.6 21.8 89.0 90.5 89.0 0.79 0.73 0.63 737 280 280 0.1080 2.700 131
15 2940 D160M 48.7 27.6 26.2 25.3 91.5 92.0 91.1 0.90 0.89 0.84 739 208 340 0.0432 0.432 117
15 1470 D160L 97.4 28.9 27.4 26.4 91.9 92.4 91.7 0.86 0.82 0.72 760 226 309 0.0929 1.394 133
15 970 D180L 147.7 31.6 30.0 28.9 90.2 90.7 89.5 0.80 0.76 0.72 650 230 250 0.1670 4.175 171
18.5 2935 D160L 60.2 34.1 32.4 31.2 91.6 91.9 91.0 0.90 0.88 0.82 710 215 327 0.0525 0.368 134
18.5 1470 D180M 120.2 35.2 33.4 32.2 92.4 92.6 91.7 0.87 0.83 0.73 734 224 348 0.1350 1.350 167
18.5 975 D200L 181.2 38.1 36.2 34.9 90.0 90.1 89.5 0.82 0.78 0.69 650 230 250 0.3020 3.624 216
22 2950 D180M 71.2 39.8 37.8 36.5 92.3 92.1 90.5 0.91 0.89 0.82 775 260 373 0.0710 0.497 169
22 1470 D180L 142.9 42.0 39.9 38.5 92.7 93.1 92.5 0.86 0.82 0.72 707 214 325 0.1360 1.360 181
22 975 D200L 215.4 43.9 41.7 40.2 91.7 90.9 90.0 0.83 0.80 0.71 619 220 250 0.3420 4.104 225
30 2950 D200L 97.1 53.4 50.7 48.9 93.1 93.1 92.0 0.92 0.92 0.88 750 226 331 0.1190 0.833 220
30 1470 D200L 194.9 53.6 50.9 49.1 93.2 93.5 92.9 0.91 0.90 0.85 646 229 281 0.2450 2.450 232
30 980 D225M 292.3 59.0 56.0 54.0 92.0 91.5 90.1 0.84 0.82 0.75 590 230 230 0.5250 6.300 286
37 2950 D200L 119.8 65.6 62.4 60.1 93.3 93.0 92.0 0.92 0.91 0.88 755 224 330 0.1330 0.931 239
37 1475 D225S 239.5 69.4 65.9 63.6 93.6 93.8 93.2 0.87 0.85 0.78 639 210 289 0.3900 3.900 287
37 985 D250M 358.7 69.5 66.0 63.6 93.0 93.1 90.2 0.87 0.85 0.75 705 230 250 0.8070 9.684 380
45 2965 D225M 144.9 79.9 75.9 73.1 93.8 93.6 92.5 0.91 0.90 0.86 735 335 342 0.2210 1.547 297
45 1475 D225M 291.3 83.7 79.5 76.6 93.9 94.2 93.7 0.87 0.86 0.80 662 201 299 0.4500 4.500 322
45 985 D280S 436.3 86.1 81.8 78.9 93.4 93.0 91.0 0.85 0.85 0.76 705 230 250 1.3340 16.008 465
55 2970 D250M 176.8 96.9 92.0 88.7 94.6 94.5 93.5 0.91 0.89 0.84 799 205 362 0.3050 2.135 380
55 1480 D250M 354.9 100.4 95.4 92.0 94.4 94.6 94.0 0.88 0.86 0.81 710 225 328 0.6400 6.400 385
55 984 D280M 533.8 104.6 99.4 95.8 94.0 94.0 91.5 0.85 0.83 0.75 678 140 230 1.5980 19.176 540
75 2975 D280S 240.7 133.3 126.6 122.1 94.6 94.5 93.5 0.90 0.90 0.86 633 211 319 0.5840 2.920 510
75 1485 D280S 482.3 134.8 128.0 123.4 95.0 95.1 94.4 0.89 0.88 0.83 675 205 335 1.0450 7.315 510
75 984 D315S 727.8 141.9 134.8 129.9 94.5 94.8 92.0 0.85 0.83 0.76 688 140 230 3.9400 39.400 861
90 2980 D280M 288.4 160.3 152.3 146.8 95.1 95.0 93.9 0.90 0.88 0.82 799 270 350 0.6650 3.325 540
90 1485 D280M 578.7 161.5 153.4 147.9 95.2 95.3 94.8 0.89 0.89 0.83 688 208 337 1.3960 9.772 600
90 985 D315M 872.5 168.3 159.8 154.1 94.5 94.9 92.1 0.86 0.83 0.76 689 155 230 4.5800 45.800 940
110 2975 D315S 353.1 194.4 184.7 178.0 95.1 94.8 93.7 0.90 0.90 0.87 630 197 315 1.1300 5.650 920
110 1485 D315S 707.4 199.3 189.3 182.5 95.2 95.1 94.1 0.88 0.87 0.80 620 221 316 2.9800 20.860 930
110 985 D315L 1066.4 204.6 194.3 187.3 95.0 95.3 92.5 0.86 0.84 0.77 689 140 220 5.2300 52.300 1110
110 740 D315L 1419.5 217.7 206.8 199.3 94.8 94.5 93.0 0.81 0.76 0.65 643 120 220 6.5500 78.600 1160
lE2
Standard Bearings
Performance Data
132kW-315kW TEFC, CLASS F INSULATION, S1 (MCR) DUTY
Current (amp) Efficiency (%) Power Factor D.O.L. D.O.L. Break Rotor Max load Weight
Full Frame Rated at volts at load at load Starting Starting down inertia inertia B3
Speed No. Torque current Torque Torque mr2 mr2
kW (RPM) (Nm) (%FLC) (%FLT) (%FLT) (kg.m2) (kg.m2) Kg
380 400 415 100% 75% 50% 100% 75% 50%
132 2975 D315M 423.7 233.4 221.8 213.8 95.3 95.1 93.9 0.90 0.90 0.87 590 173 277 1.7500 8.750 970
132 1485 D315M 848.8 240.5 228.5 220.2 95.2 95.2 94.0 0.88 0.87 0.81 580 216 305 3.4800 24.360 1010
132 985 D315L 1279.7 245.5 233.2 224.8 95.0 95.4 93.6 0.86 0.85 0.78 694 150 220 5.5400 55.400 1175
132 740 D355M 1703.4 257.5 244.6 235.7 95.0 94.5 93.1 0.82 0.77 0.66 638 110 220 10.4000 124.800 1700
160 2975 D315L 513.6 282.0 267.9 258.2 95.8 95.4 94.2 0.90 0.89 0.84 724 195 260 2.0100 10.050 1080
160 1485 D315L 1028.9 288.7 274.2 264.3 95.7 95.6 94.2 0.88 0.85 0.80 660 220 300 3.9600 27.720 1080
160 985 D355M 1551.2 292.6 278.0 267.9 95.5 94.8 93.5 0.87 0.85 0.78 697 110 220 8.8100 88.100 1620
160 740 D355M 2064.7 310.4 294.9 284.3 95.5 94.8 93.2 0.82 0.78 0.69 655 100 220 11.7000 140.400 1730
200 2975 D315L 642.0 347.8 330.5 318.5 96.0 94.7 94.0 0.91 0.89 0.86 677 150 260 2.2700 11.350 1170
200 1485 D315L 1286.1 360.1 342.1 329.7 95.9 95.8 95.0 0.88 0.85 0.80 660 210 310 4.4700 31.290 1170
200 990 D355M 1929.2 365.7 347.5 334.9 95.5 95 93.5 0.87 0.85 0.79 673 120 220 9.6300 96.300 1730
200 745 D355L 2563.6 388.0 368.6 355.3 95.5 94.8 93.3 0.82 0.79 0.69 634 110 220 12.8000 153.600 1970
250 2975 D355M 802.5 434.8 413.1 398.1 96.0 96 94.1 0.91 0.90 0.86 722 190 240 2.9700 14.850 1690
250 1487 D355M 1605.5 444.6 422.3 407.1 96.0 95.2 94.0 0.89 0.87 0.84 770 210 330 5.7500 40.250 1720
250 990 D355L 2411.4 450.1 427.6 412.1 95.9 95.4 93.4 0.88 0.87 0.80 699 160 230 10.5400 105.400 1820
315 2975 D355L 1011.1 546.7 519.4 500.6 96.2 95.8 94.0 0.91 0.90 0.87 735 150 240 4.1700 20.850 1860
315 1490 D355L 2018.8 552.8 525.2 506.2 96.2 95.8 95.0 0.90 0.89 0.85 700 200 300 6.7900 47.530 1870
NOTES
7
1. Data is based on tests to EN60034.
2. Tolerance: EN60034.
3. All data is subject to change without prior
notification. Not to be used for installation purposes
without referring to TECO Electric Europe Limited.
Frame Drive End Non Drive End Frame Drive End Non Drive End
Size 2P 4/6/8P 2P 4/6/8P Size 2P 4/6/8P 2P 4/6/8P
D80 6204ZZC3 6204ZZC3 6204ZZC3 6204ZZC3 D200L 6312C3 6312C3 6312C3 6312C3
D90S 6205ZZC3 6205ZZC3 6205ZZC3 6205ZZC3 D225S 6313C3 6313C3 6313C3 6313C3
D90L 6205ZZC3 6205ZZC3 6205ZZC3 6205ZZC3 D225M 6313C3 6313C3 6313C3 6313C3
D100L 6206ZZC3 6206ZZC3 6206ZZC3 6206ZZC3 D250M 6314C3 6314C3 6314C3 6314C3
D112M 6306ZZC3 6206ZZC3 6306ZZC3 6206ZZC3 D280S 6314C3 6317C3 6314C3 6317C3
D132S 6308ZZC3 6308ZZC3 6308ZZC3 6308ZZC3 D280M 6314C3 6317C3 6314C3 6317C3
D132M 6308ZZC3 6308ZZC3 6308ZZC3 6308ZZC3 D315S 6317C3 6319C3 6317C3 6319C3
D160M 6309ZZC3 6309ZZC3 6309ZZC3 6309ZZC3 D315M 6317C3 6319C3 6317C3 6319C3
D160L 6309ZZC3 6309ZZC3 6309ZZC3 6309ZZC3 D315L 6317C3 6319C3 6317C3 6319C3
D180M 63 1 1 ZZC3 63 1 1 ZZC3 63 1 1 ZZC3 63 1 1 ZZC3 D355M 6317C3 6322C3 6317C3 6320C3
D180L 63 1 1 ZZC3 63 1 1 ZZC3 63 1 1 ZZC3 63 1 1 ZZC3 D355L 6317C3 6322C3 6317C3 6320C3
NOTES
1. Bearing clearance where indicated is C3, otherwise CN.
2. ZZ suffix indicates the bearings are double-shielded and pre-lubricated for life.
lE2
F KK
HD
AC
G
D
H
K
E C B
A
D80-D355 D80-D355
AB
0.75/1.1 0.55/0.75 0.55 - D80 125 165 175 100 50 19 40 6 15.5 80 10 145 224 295 1-M20x1.5
1.5 1.1 0.75 - D90S 140 180 195 100 56 24 50 8 20 90 10 155 248.5 315 1-M20x1.5
2.2 1.5 1.1 0.55 D90L 140 180 195 125 56 24 50 8 20 90 10 155 248.5 340 1-M20x1.5
3 2.2/3 1.5 0.75/1.1 D100L 160 205 215 140 63 28 60 8 24 100 12 180 277 385 1-M20x1.5
4 4 2.2 1.5 D112M 190 230 240 140 70 28 60 8 24 112 12 190 301 400 1-M25x1.5
5.5/7.5 5.5 3 2.2 D132S 216 270 275 140 89 38 80 10 33 132 12 210 346 470 1-M25x1.5
- 7.5 4/5.5 3 D132M 216 270 275 178 89 38 80 10 33 132 12 210 346 510 1-M25x1.5
8
11/15 11 7.5 4/5.5 D160M 254 320 330 210 108 42 110 12 37 160 15 225 430 610 2-M32x1.5
18.5 15 11 7.5 D160L 254 320 330 254 108 42 110 12 37 160 15 255 430 654 2-M32x1.5
22 18.5 - - D180M 279 355 380 241 121 48 110 14 42.5 180 15 280 465 700 2-M32x1.5
- 22 15 11 D180L 279 355 380 279 121 48 110 14 42.5 180 15 280 465 740 2-M32x1.5
30/37 30 18.5/22 15 D200L 318 395 420 305 133 55 110 16 49 200 19 305 505 770 2-M50x1.5
- 37 - 18.5 D225S 356 435 470 286 149 60 140 18 53 225 19 335 565 815 2-M50x1.5
45 - - - D225M 356 435 470 311 149 55 110 16 49 225 19 335 565 820 2-M50x1.5
- 45 30 22 D225M 356 435 470 311 149 60 140 18 53 225 19 335 565 845 2-M50x1.5
55 - - - D250M 406 490 510 349 168 60 140 18 53 250 24 370 620 915 2-M63x1.5
- 55 37 30 D250M 406 490 510 349 168 65 140 18 58 250 24 370 620 915 2-M63x1.5
75 - - - D280S 457 550 580 368 190 65 140 18 58 280 24 410 700 1002 2-M63x1.5
- 75 45 37 D280S 457 550 580 368 190 75 140 20 67.5 280 24 410 700 1002 2-M63x1.5
90 - - - D280M 457 550 580 419 190 65 140 18 58 280 24 410 700 1052 2-M63x1.5
- 90 55 45 D280M 457 550 580 419 190 75 140 20 67.5 280 24 410 700 1060 2-M63x1.5
110 - - - D315S 508 635 645 406 216 65 140 18 58 315 28 530 850 1190 2-M63x1.5
- 110 75 55 D315S 508 635 645 406 216 80 170 22 71 315 28 530 850 1215 2-M63x1.5
132 - - - D315M 508 635 645 457 216 65 140 18 58 315 28 530 850 1300 2-M63x1.5
- 132 90 75 D315M 508 635 645 457 216 80 170 22 71 315 28 530 850 1325 2-M63x1.5
160/200 - - - D315L 508 635 645 508 216 65 140 18 58 315 28 530 850 1300 2-M63x1.5
- 160/200 110/132 90/110 D315L 508 635 645 508 216 80 170 22 71 315 28 530 850 1325 2-M63x1.5
250 - - - D355M 610 730 710 560 254 80 170 22 71 355 28 655 965 1525 2-M75x1.5
- 250 160/200 132/160 D355M 610 730 710 560 254 100 210 28 90 355 28 655 965 1565 2-M75x1.5
315 - - - D355L 610 730 710 630 254 80 170 22 71 355 28 655 965 1525 2-M75x1.5
- 315 250 200 D355L 610 730 710 630 254 100 210 28 90 355 28 655 965 1565 2-M75x1.5
NOTES Dimensions in mm
1. Tolerance of Shaft End Diameter D: 38 to 48: k6,
55 and above: m6.
2. Tolerance of Shaft Centre Height H: 250 and below:
+0, -0.5; 280 and above: +0,-1.
3. 2 pole 45kw and above, and 4 pole 160kw and
above: for direct coupling only.
4. All data is subject to change without prior
notification. Not to be used for installation purposes
without referring to TECO Electric Europe Limited.
lE2
Dimensions
B5 Flange Mounted
22.5
45
KK KK S
S
F
E
HF
HF
M M
AC
N
P
G
0.75/1.1 0.75 0.55 - D80D 19 40 6 15.5 165 130 200 12 3.5 175 235 295 1-M20x1.5
1.5 1.1 0.75 - D90S 24 50 8 20 165 130 200 12 3.5 195 250 315 1-M20x1.5
2.2 1.5 1.1 0.55 D90LD 24 50 8 20 165 130 200 12 3.5 195 270 340 1-M20x1.5
3 2.2/3 1.5 0.75/1.1 D100LD 28 60 8 24 215 180 250 15 4 215 280 385 1-M20x1.5
4 4 2.2 1.5 D112MD 28 60 8 24 215 180 250 15 4 240 360 400 1-M25x1.5
5.5/7.5 5.5 3 2.2 D132SD 38 80 10 33 265 230 300 15 4 275 360 470 1-M25x1.5
9
- 7.5 4/5.5 3 D132MD 38 80 10 33 265 230 300 15 4 275 360 510 1-M25x1.5
11/15 11 7.5 4/5.5 D160MD 42 110 12 37 300 250 350 19 5 330 430 610 2-M32x1.5
18.5 15 11 7.5 D160LD 42 110 12 37 300 250 350 19 5 330 430 654 2-M32x1.5
22 18.5 - - D180MD 48 110 14 42.5 300 250 350 19 5 380 430 700 2-M32x1.5
- 22 15 11 D180LD 48 110 14 42.5 300 250 350 19 5 380 450 740 2-M32x1.5
30/37 30 18.5/22 15 D200LD 55 110 16 49 350 300 400 19 5 420 545 770 2-M50x1.5
- 37 - 18.5 D225SD 60 140 18 53 400 350 450 19 5 470 555 815 2-M50x1.5
45 - - - D225MD 55 110 16 49 400 350 450 19 5 470 555 820 2-M50x1.5
45 30 22 D225MD 60 140 18 53 400 350 450 19 5 470 555 845 2-M50x1.5
55 - - - D250MD 60 140 18 53 500 450 550 19 5 510 640 915 2-M63x1.5
55 37 30 D250MD 65 140 18 58 500 450 550 19 5 510 640 915 2-M63x1.5
75 - - - D280SD 65 140 18 58 500 450 550 19 5 580 675 1002 2-M63x1.5
75 45 37 D280SD 75 140 20 67.5 500 450 550 19 5 580 675 1010 2-M63x1.5
90 - - - D280MD 65 140 18 58 500 450 550 19 5 580 675 1052 2-M63x1.5
- 90 55 45 D280MD 75 140 20 67.5 500 450 550 19 5 580 675 1060 2-M63x1.5
NOTES Dimensions in mm
1. Tolerance of Shaft End Diameter D: 38 to 48: k6,
55 and above: m6
2. Tolerance of N: h7
3. 2 pole 45kw & above, 4 pole 160kw & above: for direct
coupling only.
4. All data is subject to change without prior notification.
Not to be used for installation purposes without
referring to Teco Electric Europe Limited.
lE2
(GE)
F
M M
HF
HF
G
L
E
T
N
P D180D-D200D D225D-D355D
22 18.5 - - D180MD 48 110 14 42.5 300 250 350 19 5 380 500 700 2-M32x1.5
- 22 15 11 D180LD 48 110 14 42.5 300 250 350 19 5 380 500 740 2-M32x1.5
30/37 30 18.5/22 15 D200LD 55 110 16 49 350 300 400 19 5 420 550 770 2-M50x1.5
- 37 - 18.5 D225SD 60 140 18 53 400 350 450 19 5 470 610 815 2-M50x1.5
45 - - - D225MD 55 110 16 49 400 350 450 19 5 470 610 820 2-M50x1.5
45 30 22 D225MD 60 140 18 53 400 350 450 19 5 470 610 845 2-M50x1.5
10
55 - - - D250MD 60 140 18 53 500 450 550 19 5 510 650 910 2-M63x1.5
55 37 30 D250MD 65 140 18 58 500 450 550 19 5 510 650 910 2-M63x1.5
75 - - - D280SD 65 140 18 58 500 450 550 19 5 580 720 985 2-M63x1.5
75 45 37 D280SD 75 140 20 67.5 500 450 550 19 5 580 720 985 2-M63x1.5
90 - - - D280MD 65 140 18 58 500 450 550 19 5 580 720 1060 2-M63x1.5
- 90 55 45 D280MD 75 140 20 67.5 500 450 550 19 5 580 720 1060 2-M63x1.5
110 - - - D315SD 65 140 18 58 600 550 660 24 6 645 900 1190 2-M63x1.5
- 110 75 55 D315SD 80 170 22 71 600 550 660 24 6 645 900 1215 2-M63x1.5
132 - - - D315MD 65 140 18 58 600 550 660 24 6 645 900 1300 2-M63x1.5
- 132 90 75 D315MD 80 170 22 71 600 550 660 24 6 645 900 1325 2-M63x1.5
160/200 - - - D315LD 65 140 18 58 600 550 660 24 6 645 900 1300 2-M63x1.5
- 160/200 110/132 90/110 D315LD 80 170 22 71 600 550 660 24 6 645 900 1325 2-M63x1.5
250 - - - D355MD 75 140 20 67.5 740 680 800 24 6 710 1010 1525 2-M75x1.5
- 250 160/200 132/160 D355MD 95 170 25 86 740 680 800 24 6 710 1010 1565 2-M75x1.5
315 - - - D355LD 75 140 20 67.5 740 680 800 24 6 710 1010 1525 2-M75x1.5
- 315 250 200 D355LD 95 170 25 86 740 680 800 24 6 710 1010 1565 2-M75x1.5
NOTES Dimensions in mm
1. Tolerance of Shaft End Diameter D: 48: k6, 55 and
above: m6
2. Tolerance of N: h7
3. 2 pole 45kw & above, 4 pole 160kw & above: for direct
coupling only.
4. All data is subject to change without prior notification.
Not to be used for installation purposes without
referring to Teco Electric Europe Limited.
lE2
FRAMES 80D-355LD
L AD AD
lE1
22.5
45
Mounted Dimensions
B3/B5 Foot and Flange
S
S
F
E
HD
HD
M M
AC
N
P
G
H
K K
T C B
A A
AB AB
0.75/1.1 0.55 0.55 - D80 125 165 100 50 19 40 6 15.5 80 10 165 130 200 12 3.5 175 145 230 295
1.5 1.1 0.75 - D90S 140 180 100 56 24 50 8 20 90 10 165 130 200 12 3.5 195 155 248.5 315
2.2 1.5 1.1 0.55 D90L 140 180 125 56 24 50 8 20 90 10 165 130 200 12 3.5 195 155 248.5 340
3 2.2/3 1.5 0.75/1.1 D100L 160 205 140 63 28 60 8 24 100 12 215 180 250 15 4 215 180 277 385
4 4 2.2 1.5 D112M 190 230 140 70 28 60 8 24 112 12 215 180 250 15 4 240 190 301 400
5.5/7.5 5.5 3 2.2 D132S 216 270 140 89 38 80 10 33 132 12 265 230 300 15 4 275 210 346 470
- 7.5 4/5.5 3 D132M 216 270 178 89 38 80 10 33 132 12 265 230 300 15 4 275 210 346 510
11
11/15 11 7.5 4/5.5 D160M 254 320 210 108 42 110 12 37 160 15 300 250 350 19 5 330 255 430 610
18.5 15 11 7.5 D160L 254 320 254 108 42 110 12 37 160 15 300 250 350 19 5 330 255 430 654
22 18.5 - - D180M 279 355 241 121 48 110 14 42.5 180 15 300 250 350 19 5 380 280 465 702
- 22 15 11 D180L 279 355 279 121 48 110 14 42.5 180 15 300 250 350 19 5 380 280 465 740
30/37 30 18.5/22 15 D200L 318 395 305 133 55 110 16 49 200 19 350 300 400 19 5 420 305 505 770
- 37 - 18.5 D225S 356 435 286 149 60 140 18 53 225 19 400 350 450 19 5 470 335 565 815
45 - - - D225M 356 435 311 149 55 110 16 49 225 19 400 350 450 19 5 470 335 565 820
45 30 22 D225M 356 435 311 149 60 140 18 53 225 19 400 350 450 19 5 470 335 565 845
55 - - - D250M 406 490 349 168 60 140 18 53 250 24 500 450 550 19 5 510 370 625 915
- 55 37 30 D250M 406 490 349 168 65 140 18 58 250 24 500 450 550 19 5 510 370 625 915
75 - - - D280S 457 550 368 190 65 140 18 58 280 24 500 450 550 19 5 580 410 700 1002
- 75 45 37 D280S 457 550 368 190 75 140 20 67.5 280 24 500 450 550 19 5 580 410 700 1010
90 - - - D280M 457 550 419 190 65 140 18 58 280 24 500 450 550 19 5 580 410 700 1052
- 90 55 45 D280M 457 550 419 190 75 140 20 67.5 280 24 500 450 550 19 5 580 410 700 1060
110 - - - D315S 508 635 406 216 65 140 18 58 315 28 600 550 660 24 6 645 530 850 1190
- 110 75 55 D315S 508 635 406 216 80 170 22 71 315 28 600 550 660 24 6 645 530 850 1215
132 - - - D315M 508 635 457 216 65 140 18 58 315 28 600 550 660 24 6 645 530 850 1300
- 132 90 75 D315M 508 635 457 216 80 170 22 71 315 28 600 550 660 24 6 645 530 850 1325
160/200 - - - D315L 508 635 508 216 65 140 18 58 315 28 600 550 660 24 6 645 530 850 1300
- 160/200 110/132 90/110 D315L 508 635 508 216 80 170 22 71 315 28 600 550 660 24 6 645 530 850 1325
250 - - - D355M 610 730 560 254 80 170 22 71 355 28 740 680 800 24 6 710 655 965 1525
- 250 160/200 132/160 D355M 610 730 560 254 100 210 28 90 355 28 740 680 800 24 6 710 655 965 1565
315 - - - D355L 610 730 630 254 80 170 22 71 355 28 740 680 800 24 6 710 655 965 1525
- 315 250 200 D355L 610 730 630 254 100 210 28 90 355 28 740 680 800 24 6 710 655 965 1565
45
S
F
E
HD
N M
AC
P
G
T D80-D112 D80-D112
0.75/1.1 0.55/0.75 0.55 - D80 19 40 6 15.5 100 80 120 4-M6 3 175 235 295
1.5 1.1 0.75 - D90S 24 50 8 20 115 95 140 4-M8 3 195 250 315
2.2 1.5 1.1 0.55 D90L 24 50 8 20 115 95 140 4-M8 3 195 270 340
3 2.2/3 1.5 0.75/1.1 D100L 28 60 8 24 130 110 160 4-M8 3.5 215 280 385
4 4 2.2 1.5 D112M 28 60 8 24 130 110 160 4-M8 3.5 240 360 400
F
E
HD
M
AC
N
P
G
D
H
K
T C B
A
AB
D80-D112 D80-D112
0.75/1.1 0.55/0.75 0.55 - D80 125 165 100 50 19 40 6 15.5 80 10 100 80 120 4-M6 3 175 214 295
1.5 1.1 0.75 - D90S 140 180 100 56 24 50 8 20 90 10 115 95 140 4-M8 3 195 250 315
2.2 1.5 1.1 0.55 D90L 140 180 125 56 24 50 8 20 90 10 115 95 140 4-M8 3 195 250 340
3 2.2/3 1.5 0.75/1.1 D100L 160 205 140 63 28 60 8 24 100 12 130 110 160 4-M8 3.5 215 270 385
4 4 2.2 1.5 D112M 190 230 140 70 28 60 8 24 112 12 130 110 160 4-M8 3.5 240 300 400
1.0
0.9
Torque Derating Factor
0.8
0.7
0.6
0.5
0.4
0.3
0 10 20 30 40 50 60 70 80 90 100
Frequency (Hz)
NOTES:
This data is for direct coupled drive arrangement, and assumes constant power above 50Hz
Noise and vibration limits applicable to 50Hz supply do not apply
Bearing life will be affected by the operation time at various speeds
HEAD OFFICE TURKEY CHINA
TECO Worldwide
Operations Teco Electric & Machinery Co., Ltd
10F No,3-1, Yuan Cyu St.
OPTIMER Elektrik Makina Ltd.
Inonu cad. Sumko Sitesi M4-A blok
Shanghai Ofce
Rm 321 Building No.6
Nan-Kang Taipei 115 No: 2-kozyatagi-lstanbul 34742 Lane 1279 Zhongshan W. Rd.
Taiwan ROC Tel: +90-216-464 54 13Pbx. Shanghai. PRC
Tel: +886 2 6615 9111 Fax: +90-216-464 54 47 Tel: +86 21 5116 8255
www.teco.com.tw Fax: +86 21 6278 8761
MIDDLE EAST
UNITED STATES Teco Middle East Electric & Machinery Wuxi Teco Electric & Machinery Co., Ltd
Teco-Westinghouse Motor Company Co., Ltd. No. 9 South of Changjiang Road,
PO Box 227 (78680-0277) Kingdom of Saudi Arabia Dammam City New Zone, Wuxi,
5100 N.IH35 P.O. Box 708 - Dammam 31421 KSA Jiangsu Province, PRC
Round Rock Texas 78681 USA Tel: +966 3 812 4823 Tel: +86 510 8534 2005
Tel: +1 512 255 4141 Fax: +966 3 834 1678 Fax: +86 510 8534 2001
+1 800 873 8326 www.teco-me.com www.wuxiteco.com
www.tecowestinghouse.com
SAUDI ARABIA Jiangxi Teco Electric & Machinery Co., Ltd
CANADA Al Quraishi Electrical Services of S.A. 189 Dongyuan Rd. Hi-Tech Zone, Nanchang
Teco-Westinghouse Al Quraishi Center, King Khalid Street, Jiangxi Province, PRC
Motors Inc. (Canada) P.O.Box 7386, Dammam-31462 Tel: +86 791 819 5999
18060-109th Ave Tel: +966 3 857-2537 Fax: +86 791 816 7730
Edmonton, Alberta T5S 2K2 Canada Fax: +966 3 857-2541
Tel: +1 780 444 8933 www.aqesa.com Suzhou Teco Electric & Machinery Co., Ltd
Fax: (780) 486-4575 No. 1 Changjiang W.Rd. Liuhe
24 HR Emergency Pager: IRAN, AZERBAIJAN & ARMENIA Taicang City, Suzhou,
(780) 419 7734 ATLAS DIBA Engineering & Trade Co. Jiangsu Province, PRC
Toll Free: 800-661-4023 No.3, Fakouri St., South Kadj Ave. Tel: +86 512 5361 9901
Fax Toll Free: 888-USE-TWMI Golha Sq., Fatemi, Tehran, Iran Fax: +86 512 5396 1058
www.twmi.com Tel: +98 21 88 33 03 81-3
Fax: +98 21 88 33 03 84 Fujian Teco Precision Co., Ltd.
UNITED KINGDOM www.atlasdibaco.com Xiayang, Jiazhao, Zhanggang Village, Saiqi
Teco Electric Europe Ltd. Development
7 Dakota Avenue, Salford. EGYPT Zone, Fuan, Fujian, China
M50 2PU Amsol & Co. Tel: +86 593 633 0300
Tel: +44 161 877 8025 38 Mossadak Street Dokki, Giza, Egypt Fax: +86 593 633 0303
14
Fax: +44 161 877 8030 Tel: +202 333 79 774
www.teco.co.uk Fax: +202 376 20 307 HONG KONG
Tecoson Industrial Development
MEXICO SOUTH AFRICA (HK) Co., Ltd.
Teco Westinghouse Motor Company ArmCoil Afrika (Pty) Ltd. Rm 3712 Hong Kong Plaza
S.A. de C.V. Unit 3 Prestige Park 127 Main Reef Road 186-191 Connaught Rd. West
Circuito Mexiamora Poniente No. 321 Technikon Roodepoort Hong Kong
Col. Puerto Interior, PO Box 500 Maraisburg 1700 Tel: +852 2858 3220
Parque Santa Fe CP 36275 Gauteng South Africa
Silao, Guanajuato., Mxico Tel: +2711 763 2351 MALAYSIA
Tel: +52 (472) 748 9016 al 20 Fax: 0866 318 588 Plo 52, Jalan Firma 2/1,
www.armcoil.co.za Kawasan Perindustrian Tebrau 1,
NETHERLANDS 81100 Johor Bahru, Johor, Malaysia
Teco Electric & Machinery B.V. AUSTRALIA Tel: (60) 7-3518862 / (60) 7-3548008
Teco's European Head Ofce Teco Australia Pty Ltd. Fax: (60) 7-3546107
Rivium 3e Straat 27 335-337 Woodpark Road
2909 LH Capelle a/d IJssel Smitheld NSW 2164 Australia THAILAND
The Netherlands Tel: +61 2 9765 8118 Teco Electric & Machinery
Tel: +31 10 266 6633 www.teco.com.au (Thai) Co., Ltd.
Fax: +31 10 202 6415 128/1 Soi Watsrivareenoi
NEW ZEALAND Moo 7 Bangna-Trad Road Km 18
GERMANY Teco New Zealand Pty Ltd. Bangchalong Bangplee
Teco Electric & Machinery B.V. Unit 3, 477 Great South Road Samuthprakarn 10540 Thailand
Niederiassung Deutschland, Penrose Auckland New Zealand Tel: +662 3371311- 20
Marktstrasse 10 Tel: +64 9 526 8480
69 37441 Bad Sachsa VIETNAM
Germany JAPAN Teco(Vietnam) Electric & Machinery Co., Ltd
Tel: +49 5523 95340 Sankyo Co., Ltd. KCN LONG Thanh, Huyen Long Thanh,
Fax: +49 5523 953424 26th . World Trading Center Bldg. Tinh Dong Nai. Vietnam
www.teco-westinghouse.de 2-4-1 Hamamatsucho Minato-ku Tel: +84 61 3514151
Tokyo Japan 105-6126 Fax: +84 61 3514110
SPAIN Tel: +81 3 3435 9729
Teco Electric & Machinery B.V. Fax: +81 3 3578 8381 PHILIPPINES
Spain Ofce Trade One
C/Apostol Santiago, 38, 1-1 SINGAPORE No. 56 Aragon Street San Francisco
28017 Madrid, Spain Teco Electric & Machinery (PTE) Ltd. Del Monte 1100 Quezon City Metro Manila,
Tel/Fax: 34-91-326-30-91 18 chin Bee Drive Philippines
E-mail: info@tecowestinghouse.es Singapore 619865 Tel: (632) 371-3032
Tel: +65 6 265 4622 Fax: (632) 371-1175
www.teco.com.sg www.tradeoneinc.com
INDONESIA
P.T. Teco Multiguna Elektro
JL Bandengan Utara No. 83/1-2-3
Jakarta Utara-14440 Indonesia
Tel: +62 21 662 2201
APR. 10/TA-6201