Appl 14 Agar Heavy Oil Well Testing
Appl 14 Agar Heavy Oil Well Testing
Appl 14 Agar Heavy Oil Well Testing
Up until 2001, the well was tested using a 100 bbl tank with three to eight wells flowing through individual flowlines to each
tank. The tank filled for a distinct period of time to obtain the volumetric flow rate measurement by manual tank strapping,
then water cut was determined by averaging the water content
of samples collected at different depths of the tank (top, middle
and bottom). Due to the nature of the heavy, viscous crude oil,
tanks had large amounts of foam, which took up to 24 hours
to settle.
APPLICATION NOTE 14
All Agar Corporation Instruments are covered by one or more of the following U.S. Patents: 4,503,383; 4,774,680; 5,099,697; 5,101,163; 5,101,367; 5,263,363;
5,503,004; 5,551,305; 5,589,642; 5,741,977, RE 36,597. Other patents pending in the USA and other countries.
APPLICATION NOTE 14 - Heavy Oil - High Viscosity
MPFM-400 Series
MPFM-300 Series
MPFM-50 Series
www.agarcorp.com
ER No. 5024; SL0024 Rev -