Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 913 views

    Split Unit Installation Method PDF

    Uploaded by

    Mohamad Hafiz
    This method statement outlines the installation process for an air conditioning split unit. It will provide guidance for approved materials, installation methods, equipment and safety precautions. Key steps include running insulated copper piping, installing the indoor and outdoor units, connecting power cables, pressure testing, vacuuming the system, and testing the air conditioner start up. Safety equipment like helmets and gloves must be used and risks like electric shock, falls, and injuries are identified and mitigation measures provided.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Split Unit Installation Method PDF

    Uploaded by

    Mohamad Hafiz
    913 views2 pages
    This method statement outlines the installation process for an air conditioning split unit. It will provide guidance for approved materials, installation methods, equipment and safety precautions. Key steps include running insulated copper piping, installing the indoor and outdoor units, connecting power cables, pressure testing, vacuuming the system, and testing the air conditioner start up. Safety equipment like helmets and gloves must be used and risks like electric shock, falls, and injuries are identified and mitigation measures provided.

    Original Title

    119836604-Split-Unit-Installation-Method.pdf

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This method statement outlines the installation process for an air conditioning split unit. It will provide guidance for approved materials, installation methods, equipment and safety precautions. Key steps include running insulated copper piping, installing the indoor and outdoor units, connecting power cables, pressure testing, vacuuming the system, and testing the air conditioner start up. Safety equipment like helmets and gloves must be used and risks like electric shock, falls, and injuries are identified and mitigation measures provided.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    913 views2 pages

    Split Unit Installation Method PDF

    Uploaded by

    Mohamad Hafiz
    This method statement outlines the installation process for an air conditioning split unit. It will provide guidance for approved materials, installation methods, equipment and safety precautions. Key steps include running insulated copper piping, installing the indoor and outdoor units, connecting power cables, pressure testing, vacuuming the system, and testing the air conditioner start up. Safety equipment like helmets and gloves must be used and risks like electric shock, falls, and injuries are identified and mitigation measures provided.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    METHOD STATEMENT FOR AIR-CON INSTALLATION

    CK/SCA/MS/M/001 Rev.0
    Purpose

    To demonstrate the methodology to be followed in the installation of AC Split Unit


    Installation.

    Scope

    This method statement is applicable to the installation of AC split unit at all applicable
    areas and as set out in the specifications and the approved shop drawings.

    Reference Documents

    Approved Material Submittals


    Approved shop drawing
    Installation Details

    Materials

    1. CDU (Indoor Unit)


    2. FCU (Outdoor Unit)
    3. Copper Pipe
    4. Insulation
    5. PVC drainage pipe.
    6. Accessories

    Standards

    Refer to the contract specification.

    Installation Method

    1. Prepare all the necessary material and tool in the working area.
    2. Run copper pipe with insulation by support with hanger.
    3. Install the CDU (outdoor unit) on the CDU support as per detail shop drawing, and
    then connect the copper pipe to the CDU.
    4. Install the FCU (Indoor unit) on the wall as per detail shop drawing, and then connect
    the copper pipe to the FCU.
    5. Connect the power cable for FCU and CDU.
    6. Test pressure leakage with N2 35 bars
    7. Vacuum system -30 In mg
    8. Open the valve of CDU and Test the AC start.
    9. Cover the indoor unit and outdoor unit to avoid any scratch or damage.
    10. Clean the site for conclusion of work.

    Equipment/Tools
    Electric Hammer Drill Copper pipe Flaring tools
    Level Extension Cords
    Wrenches Cutting machine
    Welding machine Electrical basic tools& equipment
    Compressor Gauge Vacuum Pump

    Safety

    The contents of this method statement shall form the basis of a toolbox talk for all operatives
    before the commencement of such works.

    1
    METHOD STATEMENT FOR AIR-CON INSTALLATION

    CK/SCA/MS/M/001 Rev.0
    Protective & Safety Equipment

    1. Safety Helmet
    2. Safety Shoes
    3. Hand Gloves
    4. Safety Goggles
    5. Safety Belts

    Risk Assessment

    1. Danger of hand or other injuries from cutting tools and sharp edges.
    2. Danger of Electric shock during working near transformers.
    3. Danger of falls from heights.
    4. Falls, knocks or trips due to poorly lit areas within the structure.
    5. Danger of injury when lifting, carrying, lighting fixtures.
    6. Includes danger from surroundings e.g. rebar lifting and installations and other trade
    activities.

    Risk Management

    1. Only skilled/trained operatives shall carry out the works.


    2. All operatives shall be provided with full body safety harnesses when working at
    heights above three (3) meters as set out in this Method statement
    Proper access and egress shall be provided by means of scaffolds and mobile towers.
    3. Provide temporary lighting as required in areas subject to poor lighting.
    4. When drilling all operatives shall wear a full face visor. All other operatives in the
    general area of such work shall be made aware and avoid such areas.
    5. Cover transformers to protect smashed materials falling from above.
    6. All hand tools and extension leads shall be inspected before use to ensure they are in
    good working order, with no damaged or exposed elements.
    7. Leads shall be checked along their full length and plugs and sockets shall be of the
    correct type and rating.

    You might also like