Pipe Fittings

Visual Index
Pipe Fittings and

Port Adapters
Pipe Fittings
and Port Adapters F
The Fitting Authority
4300 Catalog Pipe Fittings and Port Adapters
F5OHAO F5OF FF FFF FF33M

SAE-ORB / SAE-ORB SAE-ORB / NPTF NPTF / NPTF NPTF / NPTF Long BSPT / BSPT
Nipples
F11 F11 F11 F11 F12

G5HG5 GG GG44M F5OG5
SAE-ORB / SAE-ORB NPTF / NPTF BSPP / BSPP SAE-ORB / SAE-ORB
Reducers,
Couplings Expanders,
Conversions
F12 F12 F12 F13

F5OG F5OHG8 F5OHG4 FHG5 FG PTR
SAE-ORB / NPTF SAE-ORB / Metric SAE-ORB / BSPP NPTF / SAE-ORB NPTF / NPTF Pipe Thread Reducer
F13 F13 F13 F14 F14 F14

FHG8 FHG4 F87OHG87M F8OHG5 F8OHG F4OHG5
NPTF / Metric NPTF / BSPP ISO 6149 / ISO 6149 Metric-ORR / SAE-ORB Metric-ORR / NPTF BSPP-ORR / SAE-ORB
F14 F15 F15 F15 F15 F16

F4OHG PTR34M RI-ED RI F3HG F3HG5
BSPP-ORR / NPTF BSPT / BSPP BSPP-ED / BSPP BSPP-CF / BSPP BSPT/ NPTF BSPT / SAE-ORB
F16 F16 F17 F18 F19 F19

CD45 DD45 AOEG5 AOEG
NPTF / NPTF NPTF / NPTF SAE-ORB / SAE-ORB SAE-ORB / NPTF
45 Elbows 90 Elbows
F19 F19 F19 F19

AOE4G CR CD DD A87LPOEG87LPM
SAE-ORB / NPTF Long NPTF / NPTF NPTF / NPTF NPTF / NPTF ISO 6149 / ISO 6149
F20 F20 F20 F20 F21

G5G5JAO AOG5JG5 G5G5JG5 RRS MMS
SAE-ORB Branch Tee SAE-ORB Run Tee SAE-ORB Tee NPTF Tee NPTF Branch Tee
Tees
F21 F22 F22 F22 F22
F2 Parker Hannifin Corporation

Tube Fittings Division
Columbus, Ohio
http://www.parker.com/tfd
MRO MMO MMO444M KMMOO

NPTF Run Tee NPTF Tee BSPP Tee NPTF Cross
Cross
F22 F23 F23 F23

P5ON HP5ON HP SHP HHP
SAE-ORB Hex Head SAE-ORB Hollow Hex NPTF Hex Head NPTF Square Head NPTF Hollow Hex Head
Plugs,
Bleed
Adapters
F23 F24 F24 F24 F24

HPC P87OMN VSTI M-OR VSTI M-ED VSTI R-ED P47OMN
NPTF Pipe Cap ISO 6149 Hex Head ISO 6149 Hollow Hex Metric-ED Hollow Hex BSPP-ED Hollow Hex BSPP-ORB Hex Head
F25 F25 F25 F25 F26 F26

HP3M
BSPT Hex Head
F26
Diagnostic, Orifice and Bleed Adapters (Shown in Section M)

P5ONBA HPBA
Bleed Screw / Bleed Bleed Screw / NPT
Adapter
Bleed
Adapters
M10 M10
O-Rings and Seals (Shown in Section N)

SAE O-Ring ISO 6149 O-Ring Metric O-Ring Metric Retaining BSPP O-Ring
Ring
O-Rings
and Seals
N4 N5 N5 N5 N6
BSPP Retaining Ring

N6

Columbus, Ohio
Pipe Fittings and Port Adapters Assembly and Installation

This Section contains adapters with thread types including: Please refer to Section S for the assembly and installation
NPT, NPTF, BSPT, BSPP, SAE UN/UNF, and Metric. All the instructions for Pipe Fittings and Port Adapters.
threads in this section are made to industry specifications with
conformance shown in Table F1.
Design and Construction NPT

Thread Standard
ANSI B1.20.1, FED-STD-H28/7
Shaped products (elbows, tees and crosses) are hot forged and NPTF SAE J476, ANSI B1.20.3, FED-STD-H28/8
machined, while straights are manufactured from cold drawn
barstock. Where applicable, these products are made in con- BSPT BS 21, ISO 7/1
formance with the design criteria of the Society of Automotive BSPP BS 2779, ISO 228/1
Engineers Standards, SAE J514, J530. Metric ISO 261, ANSI B1.13M, FED-STD-H28/21
Parker Fluid Connector products made from steel and brass, UN/UNF* ANSI B1.1, FED-STD-H28/2
for the most part, have NPTF threads. Stainless steel products *Class 2A or 2B
may have NPT or slightly modified NPT threads to minimize the
Table F1 Thread Conformance Standards
chance of galling on assembly.
Standard Material Specifications: The standard materials
used in the manufacture of Industrial Pipe and Adapter fittings
are shown in Table U1 on page U2.
Note: Upon request, pipe fittings, adapters and plugs could be
furnished in materials other than those shown in the material
specifications chart. Spiral
leak path
Finish - Zinc plating with silver chromate (zinc chromium 6 free)
is used on all standard steel products. Stainless steel fittings
are passivated.
Fig. F1 NPT: Wrench Tight, No Crest-Root
Contact, Flank Contact Only
How Port Connections Work
Tapered (Pipe) Threads
There are three types of tapered threads commonly used in Thread crest and
industrial applications. root in contact. Gap
remains at flank
NPT/NPTF angles.
BSPT
Metric Taper Fig. F2 NPTF: Hand Tight, Crest
to Root Contact
All three thread styles noted above use the same basic metal-to-
metal sealing design for achieving a seal. Although very similar,
there are differences in the thread dimensions, pitch, and flank
angle that do not allow interchangeability.
Full thread
NPT / NPTF Threads form contact
NPT threads, when assembled without a sealant, leave a spiral

leak path at the crest-root junction as shown in Fig. F1. To seal
pressurized fluid, NPT threads require a suitable sealant. NPTF Fig. F3 NPTF: Wrench Tight, Crest to
threads (Dryseal), on the other hand, when assembled, do not Root and Flank Contact
leave the spiral leak path. This is because they have controlled
truncation at the crest and root, ensuring metal-to-metal crest-root
contact prior to, or just as the male-female thread flanks make
contact as seen in Fig. F2. Upon further tightening, the thread
crests are flattened out until the flanks also make metal-to-metal
contact as seen in Fig. F3. Thus, theoretically at least, there is
no passage left for the fluid to leak, provided all surfaces are
flawless and dimensions exact. In reality, this is not the case
and a sealant/lubricant is necessary to achieve a leak free
joint, even with NPTF threads. The sealant/lubricant fills all
imperfections in the surfaces affecting the seal and also provides
lubrication to ease assembly and minimize galling.
Dimensions and pressures for reference only, subject to change.

Columbus, Ohio
Application Guidelines for Tapered Threads UN / UNF Threads

Straight Connectors with NPT/NTPF 3/4-14 and Smaller SAE J1926 uses UN/UNF threads and is often referred to as
SAE Straight Thread. The female port is often referred to as
Straight connectors with 3/4-14 NPT/NPTF and smaller male ORB or O-ring boss. This port style, shown in Fig. F4, is widely
pipe threads have very high pressure holding capability and seal used in North America.
reliability when used in applications without make and break
(such as maintenance) requirements.
They are also well suited for low cycle non-pulsating (static)
applications with pressures in excess of 6,000 psi.
Straight Connectors with NPT/NPTF above 3/4 -14 and
All Shaped Connectors with NPT/NPTF Threads
It is difficult to always tighten shapes with pipe threads to an
optimum tightness level because of orientation requirements.
Also, all connectors in this category with pipe threads have low
reliability for leak free operation in dynamic applications. There-
fore, they are not preferred where a leak free joint is required. Fig. F4 Typical O-Ring Boss Port
All NPTF Connectors

While a pipe thread connection can be disassembled and re- BSPP
assembled in low-pressure systems, it is not intended to be a
frequently assembled and disassembled connection. (When In Europe, Japan and many other former Commonwealth
connectors are known to be disassembled and re-assembled nations, the British Standard Pipe thread form, BSP, is still
repeatedly, pipe connections are not preferred for high-pres- used extensively to connect pipes and components in hydraulic
sure systems.) systems. The BSP thread is offered in a straight (parallel) form
known as BSPP and a tapered form known as BSPT. These
For the above applications, a port connection with an elastomeric threads feature a 55 flank angle. Fittings in this section with
seal, such as SAE straight thread port (SAE J1926/ISO11926), male BSPP threads use a primary sealing method of an O-ring
SAE four bolt split flange (SAE J518/ISO 6162), and ISO 6149 and retaining ring, as shown in Fig. F5.
is recommended. For applications where elastomeric seals cant
be used, consult the manufacturer.
As noted, BSPT and metric taper are designed and perform
similarly. Follow the NPT/NPTF guidelines for their application.
In general, tapered thread connections have the following
limitations which should be considered when specifying port
connections:
Poor dynamic sealing characteristics Fig. F5 O-Ring with Retaining Ring
Possible expansion, and even cracking, of the port
Orientation is a concern in shaped connectors
Additional sealing methods such as a cutting face or an EOlastic
Larger threads are more prone to leakage because of seal, as shown in Fig. G6, are also available on other fittings
more potential leak points within the catalog. These BSPP fittings are all designed to thread
System contamination due to thread sealant into a female BSPP port (ISO 1179), however, the seal is cre-
Prone to galling, especially in stainless steel ated with one of the aforementioned sealing methods, not with
the threads. It is also important to note that with these BSPP
Limited remakeability threaded connections, the seal occurs on the port surface, or
Parallel Thread Adapters spotface, not in an O-ring gland or chamfer as SAE and ISO-
6149 straight thread do. A detail of the BSPP port is shown on
Straight, or parallel, thread ports in various forms are becom- page T36.
ing more popular in hydraulic systems because they are more
reliable and easier to service.
Three types of threads are used for parallel thread ports:
UN/UNF (SAE straight thread)
BSPP (British Standard Pipe, Parallel)
Metric parallel
Because parallel threads only serve one function (i.e. holding
the fitting in place), some other means of sealing is always
present, such as an elastomeric O-ring or a metal seal. There
are many variations of sealing methods, and in some cases, Fig. F6 O-Ring in Fitting Groove
they are interchangeable among the different thread forms and
may appear to be similar.

Columbus, Ohio
Metric Parallel
In Europe, primarily in Germany, the traditional metric paral- Parker and other fluid connector manufacturers have expanded
lel thread form is used extensively to connect components in product offering to incorporate the ISO 6149 male studs as a
hydraulic systems. This metric thread is designed to thread into standard on many tube fitting products. Parker offers the ISO
and seal in a female Metric parallel port conforming to ISO- 6149 male stud end, shown in Fig. F7, on several tube fitting
9974-1 (DIN-3852, Part 1). Fittings in this section with male products including: Seal-Lok, Triple-Lok, EO, EO-2, Conversion
metric threads use a primary sealing method of an O-ring and Adapters, Plugs, etc. This port, utilizes metric parallel threads for
retaining ring (similar to Fig. F5). Additional sealing methods mechanical holding power and a sealing method similar to the
such as a cutting face or an EOlastic seal (similar to Fig. F6) proven SAE Straight Thread O-ring port. A detail of this metric
are also available on other fittings within the catalog. Sealing is port is shown on page T32.
accommodated with one of the aforementioned sealing methods,
not with the threads. It is also important to note that with these
male metric threads, the seal occurs on the top face (spotface)
of the port, not in an O-ring gland or chamfer as in SAE and
ISO-6149 straight threads. A detail of this metric port is shown
on page T32. Indentification
Groove
To minimize further proliferation of additional port thread styles,
the International Standards Organization Technical Committee
131 completed the development of a world standard leak-free
port connection. It is recommended that this port, ISO 6149-
Fig. F7 ISO 6149 Male
1, be specified in all new hydraulic fluid power applications.
Feature Advantage Benefit

Tapered Thread Fittings
Compact size Suitable selection for plumbing in limited or Compact systems are more efficient
tight space in a compact system. and reduce the need for excessive
routing of costly hose or tube
Widespread acceptability Available worldwide for OEM and MRO Eases efforts to find component
applications parts and replacement fittings,
reducing unnecessary downtime
High static pressure rating Allows for use in high pressure applications Increases versatility of fitting
Offered in three standard Allows customer to match media and Reduces component procurement
materials (Steel, Stainless temperature applications without special costs and increases fitting availability
Steel, and Brass) fittings and seals.
Adaptable to ORFS, Versatility for end customer and for customer Standardization reduces
Flareless Bite-type, Metric standardization efforts procurement costs
Bite-type, 37 flare, etc.
High temperature Is not limited by temperature range of Increases versatility of fitting
applications elastomeric seal
Straight Thread Fittings
Reliable sealing in Ideal in systems with high pressure and Provides reliable, long-term sealing
dynamics applications cycling
Unlimited reusability/ Extends the service life of the fitting Reduces maintenance costs and
remakeability component replacement costs
No thread sealant needed Eliminates the potential for contaminating and Reduces maintenance costs and
damaging sensitive hydraulic components component replacement costs
due to thread sealant
Infinite positioning of Eliminates potential of damaging adapter Improves assembly time and
shaped adapters and/or component by incorrectly assembling reduces maintenance costs
to accomplish correct orientation
Elastomeric seal Tolerant of minor surface imperfections to Reduces operational and
provide leak-free connection maintenance costs

Columbus, Ohio
4300 Catalog Pipe Fittings and Port Adapters Reference
Port Ends for SAE J1926-1 (ISO 11926-1) Port Return

To
Catalog
SAE J1926 SAE J1926 SAE J1926-1

Adjustable Nonadjustable Port2)
Locknut Minimum
Thread Hex Drill Thread Stud Length
T C4 D Ref. L4 Min X Z Max
SIZE UN/UNF (inch) (inch) (inch) (inch) (inch)
LIGHT DUTY (TRIPLE-LOK, FERULOK, ADAPTERS)
2 5/16-24 7/16 0.063 0.390 0.297 0.36
3 3/8-24 1/2 0.126 0.390 0.297 0.33
4 7/16-20 9/16 0.177 0.454 0.360 0.39
5 1/2-20 5/8 0.236 0.454 0.360 0.43
6 9/16-18 11/16 0.295 0.500 0.391 0.43
8 3/4-16 7/8 0.394 0.562 0.438 0.49
10 7/8-14 1 0.492 0.656 0.500 0.56
12 1 1/16-12 1 1/4 0.610 0.750 0.594 0.65
14 1 3/16-12 1 3/8 0.709 0.750 0.594 0.65
16 1 5/16-12 1 1/2 0.846 0.750 0.594 0.65
20 1 5/8-12 1 7/8 1.083 0.750 0.594 0.65
24 1 7/8-12 2 1/8 1.319 0.750 0.594 0.65
32 2 1/2-12 2 3/4 1.772 0.750 0.594 0.59
HEAVY DUTY (SEAL-LOK)
2 5/16-24 1/2 0.063 0.390 0.374 0.38
3 3/8-24 9/16 0.118 0.390 0.374 0.39
4 7/16-20 5/8 0.177 0.454 0.433 0.43
5 1/2-20 11/16 0.236 0.454 0.433 0.44
6 9/16-18 3/4 0.295 0.500 0.472 0.47
8 3/4-16 15/16 0.378 0.562 0.551 0.54
10 7/8-14 1 1/16 0.492 0.656 0.630 0.63
12 1 1/16-12 1 3/8 0.610 0.750 0.728 0.73
14 1 3/16-12 1 1/2 0.709 0.750 0.728 0.73
16 1 5/16-12 1 5/8 0.846 0.750 0.728 0.73
20 1 5/8-12 1 7/8 1.083 0.750 0.728 0.73
24 1 7/8-12 2 1/8 1.319 0.750 0.728 0.73
32 2 1/2-12 2 3/4 1.575 0.750 0.728 0.73
1) See page N3 for SAE O-rings.
2) See page T33 for port details.

Columbus, Ohio
Port Ends for ISO 6149-1 Port Return

To
Catalog
ISO 6149 ISO 6149 ISO 6149

Adjustable Nonadjustable Port2)
Minimum Lockhead
Thread Drill Thread Stud Length Hex
T87 D Ref. L4 Min L1 L2 Max S3
SIZE Metric (mm) (mm) (mm) (mm) (mm)
LIGHT DUTY (TRIPLE-LOK, FERULOK, ADAPTERS)
M8 M8X1 3 10.0 8.5 8.7 12
M10 M10X1 4.5 10.0 8.5 8.7 14
M12 M12X1.5 6 11.5 11.0 11.1 17
M14 M14X1.5 7.5 11.5 11.0 11.1 19
M16 M16X1.5 9 13.0 11.5 11.6 22
M18 M18X1.5 11 14.5 12.5 12.6 24
M20 M20X1.5 14.5
M22 M22X1.5 14 15.5 13.0 13.0 27
M27 M27X2 18 19.0 16.0 16.0 32
M30 M30X2 19.0
M33 M33X2 23 19.0 16.0 16.0 41
M38 M38X2 19.0
M42 M42X2 30 19.5 16.0 16.0 50
M48 M48X2 36 22.0 17.5 17.3 55
M60 M60X2 44 24.5 17.5 17.3 65
HEAVY DUTY (SEAL-LOK)
M8 M8X1 2 10.0 9.5 9.7 12
M10 M10X1 3 10.0 9.5 9.7 14
M12 M12X1.5 4 11.5 11.0 11.1 17
M14 M14X1.5 6 11.5 11.0 11.1 19
M16 M16X1.5 7 13.0 12.5 12.6 22
M18 M18X1.5 9 14.5 14.0 14.1 24
M20 M20X1.5 11 14.5 14.0
M22 M22X1.5 12 15.5 15.0 15.0 27
M27 M27X2 15 19.0 18.5 18.0 32
M30 M30X2 18 19.0 18.5 18.5 36
M33 M33X2 20 19.0 18.5 18.5 41
M38 M38X2 26 19.0 18.5 19.0 46
M42 M42X2 26 19.5 19.0 19.0 50
M48 M48X2 32 22.0 21.5 21.5 55
M60 M60X2 40 24.5 24.0 24.0 65
1) See page N5 for ISO 6149 O-rings.
2) See page T32 for port details.

Columbus, Ohio
NPTF and BSPT Port Ends Return

To
Catalog
NPTF and BSPT NPTF and BSPT

Port Stud
Minimum Thread
Thread Drill Thread Engagement
D Ref. J TE
SIZE PT (inch) (inch) (inch)
NPTF
2 1/8-27 0.188 0.31 0.24
4 1/4-18 0.281 0.44 0.34
6 3/8-18 0.406 0.47 0.34
8 1/2-14 0.531 0.59 0.46
12 3/4-14 0.719 0.63 0.46
16 1-11 1/2 0.938 0.75 0.59
20 1 1/4-11 1/2 1.250 0.78 0.59
24 1 1/2-11 1/2 1.500 0.81 0.59
32 2-11 1/2 1.938 0.81 0.59
BSPT
2 1/8-28 0.188 0.31 0.24
4 1/4-19 0.281 0.44 0.34
6 3/8-19 0.406 0.47 0.34
8 1/2-14 0.531 0.59 0.46
12 3/4-14 0.719 0.63 0.46
16 1-11 0.938 0.75 0.59
20 1 1/4-11 1.250 0.78 0.59
24 1 1/2-11 1.438 0.81 0.59
32 2-11 1.938 0.81 0.59

Columbus, Ohio
Port Ends for ISO 9974-1 and 1179-1 Ports Return

To
Catalog
ISO 9974 and 1179 ISO 99743) and 11794) ISO 9974 and 1179
Non-Adjustable O-Ring Port ED Seal
with Retaining Ring2)
ISO 9974 and 1179

Adjustable O-Ring
with Retaining Ring2)
ISO 9974 and 1179 Dowty Seal Stud End for

Cutting Face Seal ISO 9974-1 and ISO 1179-1 Ports
ISO 9974
O-Ring, Light Duty Heavy Duty
RR Stud (L Series) (S Series) O-Ring, O-Ring, O-Ring, RR Dowty Cutting
Port Min RR Non- RR Adj- Adj-Stud, Seal Face
Thread Drill Ref. Depth ED Stud Adj Stud Stud Locknut Hex Stud Stud
T D1 D L2 L4 L6 L7 S2 L8 L9
SIZE Metric (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm)
M8 M8X1 2 8 8.0 8.6 11 8
M10 M10X1 4 4 8 8 8.0 8.7 14 8
M12 M12X1.5 5 6 4 12 12 8.7 10.0 17 12
M14 M14X1.5 7 7 5 12 12 8.7 10.0 19 12
M16 M16X1.5 9 9 7 12 12 9.0 11.3 21 12
M18 M18X1.5 11 11 8 12 12 11.0 12.2 22 12
M20 M20X1.5 11 - 10 14 14 12.7 14
M22 M22X1.5 13 14 12 14 14 12.7 13.7 27 14
M26 M26X1.5 13 18 16 16 14.0 16
M27 M27X2 16 16 16 16 15.0 16.8 32 16
M33 M33X2 22 23 20 18 18 15.0 16.8 38 18
M42 M42X2 28 30 25 20 20 15.5 17.3 48 20
M48 M48X2 36 36 32 22 22 19.5 19.3 55 22
M60 M60X2 44 24.5 20.5 22.3 65
ISO 1179
O-Ring, Light Duty Heavy Duty
RR Stud (L Series) (S Series) O-Ring, O-Ring, O-Ring, RR Dowty Cutting
Port Min RR Non- RR Adj- Adj-Stud, Seal Face
Thread Drill Ref. Depth ED Stud Adj Stud Stud Locknut Hex Stud Stud
T D1 D L2 L4 L6 L7 S2 L8 L9
SIZE BSPP (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm)
2 1/8-28 4.4 4 8 8 6.3 7.2 14 8 8
4 1/4-19 7.5 7 5 12 12 9.4 9.4 19 11 12
6 3/8-19 9.9 9 8 12 12 9.4 9.3 22 12 12
8 1/2-14 12.3 14 12 14 14 12.6 13.1 30 14 14
12 3/4-14 15.5 18 16 16 16 12.6 13.1 36 16 16
16 1-11 21.5 23 20 18 18 16.0 14.7 46 16 18
20 1-1/4-11 27.5 30 25 20 20 16.0 14.7 50 19 20
24 1-1/2-11 33.0 36 32 22 22 16.0 14.7 55 22 22
32 2-11 26 16.0 14.7 75 25
1) See Section N for O-rings and seals.
2) O-ring with retaining ring stud ends are not shown in ISO 9974.
3) See page T37 for ISO 9974-1 port details.
4) See page T36 for ISO 1179-1 port details.

Columbus, Ohio
F5OHAO F5OF
Straight Thread Union Male Pipe Adapter
SAE-ORB / SAE-ORB SAE-ORB / NPTF
HPD Base # 0505
Specs
Dynamic Dynamic
END SIZE Pressure END SIZE
TUBE C4 TUBE C1 Pressure
FITTING 1 2 HEX L1 (x 1,000 PSI) (x 1,000 PSI) Assembly /
FITTING 1 2 HEX L Installation
PART # UN/UNF-2A UN/UNF-2A (in.) (in.) -S -SS -B PART # UN/UNF-2A NPTF (in.) (in.) -S -SS -B
4F5OHAO 7/16 - 20 7/16 - 20 9/16 1.27 6.0 6.0 3.3 4-1/8F5OF 7/16 - 20 1/8 - 27 9/16 1.00 6.0 6.0 3.3
6F5OHAO 9/16 - 18 9/16 - 18 11/16 1.41 6.0 6.0 3.3 4-1/4F5OF 7/16 - 20 1/4 - 18 9/16 1.20 6.0 6.0 3.3
8F5OHAO 3/4 - 16 3/4 - 16 7/8 1.64 6.0 6.0 3.3 5-1/4F5OF 1/2 - 20 1/4 - 18 5/8 1.20 6.0 6.0 3.3 Reference
10F5OHAO 7/8 - 14 7/8 - 14 1 1.81 5.0 5.0 3.3 6-1/4F5OF 9/16 - 18 1/4 - 18 11/16 1.25 6.0 6.0 3.3 Section
12F5OHAO 11/16 - 12 11/16 - 12 11/4 2.13 5.0 5.0 3.3 6-3/8F5OF 9/16 - 18 3/8 - 18 11/16 1.34 6.0 6.0 3.3
16F5OHAO 15/16 - 12 15/16 - 12 11/2 2.44 4.0 4.0 2.6 8-1/4F5OF 3/4 - 16 1/4 - 18 7/8 1.36 6.0 6.0 3.3
20F5OHAO 15/8 - 12 15/8 - 12 17/8 2.44 4.0 4.0 2.6 8-3/8F5OF 3/4 - 16 3/8 - 18 7/8 1.36 6.0 6.0 3.3
24F5OHAO 17/8 - 12 17/8 - 12 21/8 2.44 3.0 3.0 1.9 8-1/2F5OF 3/4 - 16 1/2 - 14 7/8 1.53 6.0 6.0 3.3
32F5OHAO 21/2 - 12 21/2 - 12 23/4 2.44 2.0 2.0 1.3 10-1/2F5OF 7/8 - 14 1/2 - 14 1 1.59 6.0 6.0 3.3
12-1/2F5OF 11/16 - 12 1/2 - 14 11/4 1.80 5.0 6.0 3.3
12-3/4F5OF 11/16 - 12 3/4 - 14 11/4 1.80 5.0 6.0 3.3
16-3/4F5OF 15/16 - 12 3/4 - 14 11/2 1.78 4.5 5.4 2.9
16-1F5OF 15/16 - 12 1 - 111/2 11/2 1.98 4.5 5.4 2.9
20-11/4F5OF 15/8 - 12 11/4 - 111/2 17/8 2.02 3.0 3.6 1.9
24-11/2F5OF 17/8 - 12 11/2 - 111/2 21/8 2.25 3.0 3.0 1.9
Note: All F5OF fittings have a 30 chamfer for sealing with NPSM
swivel type fittings.
FF FFF
Pipe Nipple Long Pipe Nipple
NPTF / NPTF NPTF / NPTF
HPD Base # 0101
Dynamic
Dynamic END SIZE
END SIZE TUBE C Pressure
TUBE C Pressure
FITTING 1 2 HEX L (x 1,000 PSI)
FITTING 1 2 HEX L(x 1,000 PSI)
PART # NPTF NPTF (in.) (in.) -S -SS -B
1/8x1.5FFF 1/8 - 27 1/8 - 27 7/16 1.5 6.0 7.2 3.9
1/8FF 1/8 - 27 1/8 - 27 7/16 1.06 6.0 7.2 3.9
1/8x2.0FFF 1/8 - 27 1/8 - 27 7/16 2.0 6.0 7.2 3.9
1/4x1/8FF 1/4 - 18 1/8 - 27 5/8 1.25 6.0 7.2 3.9
1/8x2.5FFF 1/8 - 27 1/8 - 27 7/16 2.5 6.0 7.2 3.9
1/4FF 1/4 - 18 1/4 - 18 5/8 1.45 6.0 7.2 3.9
1/8x3.0FFF 1/8 - 27 1/8 - 27 7/16 3.0 6.0 7.2 3.9
3/8x1/8FF 3/8 - 18 1/8 - 27 3/4 1.45 6.0 7.2 3.9
1/4x1.5FFF 1/4 - 18 1/4 - 18 5/8 1.5 6.0 7.2 3.9
3/8x1/4FF 3/8 - 18 1/4 - 18 3/4 1.45 6.0 7.2 3.9
1/4x2.0FFF 1/4 - 18 1/4 - 18 5/8 2.0 6.0 7.2 3.9
3/8FF 3/8 - 18 3/8 - 18 3/4 1.45 6.0 7.2 3.9
1/4x2.5FFF 1/4 - 18 1/4 - 18 5/8 2.5 6.0 7.2 3.9
1/2x1/8FF 1/2 - 14 1/8 - 27 7/8 1.52 6.0 7.2 3.3
1/4x3.0FFF 1/4 - 18 1/4 - 18 5/8 3.0 6.0 7.2 3.9
1/2x3/8FF 1/2 - 14 3/8 - 18 7/8 1.70 6.0 7.2 3.9
1/4x4.0FFF 1/4 - 18 1/4 - 18 5/8 4.0 6.0 7.2 3.9
1/2x1/4FF 1/2 - 14 1/4 - 18 7/8 1.70 6.0 7.2 3.9
3/8x2.0FFF 3/8 - 18 3/8 - 18 3/4 2.0 6.0 7.2 3.3
1/2FF 1/2 - 14 1/2 - 14 7/8 1.89 6.0 7.2 3.9
3/8x3.0FFF 3/8 - 18 3/8 - 18 3/4 3.0 6.0 7.2 3.3
3/4x1/4FF 3/4 - 14 1/4 - 18 11/8 1.78 5.5 6.6 3.5
3/8x3.5FFF 3/8 - 18 3/8 - 18 3/4 3.5 6.0 7.2 3.3
3/4x3/8FF 3/4 - 14 3/8 - 18 11/8 1.78 5.5 6.6 3.3
3/8x4.0FFF 3/8 - 18 3/8 - 18 3/4 4.0 6.0 7.2 3.3
3/4x1/2FF 3/4 - 14 1/2 - 14 11/8 1.96 5.5 6.6 3.5
1/2x2.0FFF 1/2 - 14 1/2 - 14 7/8 2.0 6.0 7.2 3.3
3/4FF 3/4 - 14 3/4 - 14 11/8 1.96 5.5 6.6 3.5
1/2x2.5FFF 1/2 - 14 1/2 - 14 7/8 2.5 6.0 7.2 3.3
1x1/4FF 1 - 111/2 1/4 - 18 13/8 1.96 4.5 5.4 3.3
1/2x3.0FFF 1/2 - 14 1/2 - 14 7/8 3.0 6.0 7.2 3.9
1x3/8FF 1 - 111/2 3/8 - 18 13/8 1.96 4.5 5.4 3.3
1/2x4.0FFF 1/2 - 14 1/2 - 14 7/8 4.0 6.0 7.2 3.3
1x1/2FF 1 - 111/2 1/2 - 14 13/8 2.09 4.5 5.4 3.3
1/2x6.0FFF 1/2 - 14 1/2 - 14 7/8 6.0 6.0 7.2 3.3
1x3/4FF 1 - 111/2 3/4 - 14 13/8 2.09 4.5 5.4 3.3
3/4x3.0FFF 3/4 - 14 3/4 - 14 11/8 3.0 5.5 6.6 3.3
1FF 1 - 111/2 1 - 111/2 13/8 2.34 4.5 5.4 3.0
1x3.0FFF 1 - 111/2 1 - 111/2 13/8 3.0 4.5 5.4 3.3
11/4x1FF 11/4 - 111/2 1 - 111/2 13/4 2.45 3.0 3.6 2.3
11/4FF 11/4 - 111/2 11/4 - 111/2 13/4 2.48 3.0 3.6 2.3
11/2x1FF 11/2 - 111/2 1 - 111/2 2 2.55 3.0 3.6 2.3
11/2FF 11/2 - 111/2 11/2 - 111/2 2 2.61 3.0 3.6 2.3
2x11/2FF 2 - 111/2 11/2 - 111/2 21/2 2.79 2.0 2.4 1.5
2FF 2 - 111/2 2 - 111/2 21/2 2.83 2.0 2.4 1.5
Note: All steel FF fittings have a 30 chamfer for sealing with NPSM
swivel type fittings.

Columbus, Ohio
FF33M G5HG5
BSPT Pipe Nipple Straight Thread Coupling
BSPT / BSPT Female SAE / Female SAE
Specs
Dynamic Dynamic
END SIZE Pressure END SIZE Pressure
TUBE C6 TUBE C
FITTING 1 2 HEX L (x 1,000 PSI) FITTING 1 2 HEX L (x 1,000 PSI)
Assembly /
PART # BSPT BSPT (mm) (mm) S SS B PART # UN/UNF-2B UN/UNF-2B (in.) (in.) -S -SS -B Installation
1/8FF33M 1/8 - 28 1/8 - 28 11 27 6.0 6.0 3.3 4G5HG5 7/16 - 20 7/16 - 20 11/16 1.13 7.0 6.0 3.3
1/4x1/8FF33M 1/4 - 19 1/8 - 28 14 32 6.0 6.0 3.3 6G5HG5 9/16 - 18 9/16 - 18 13/16 1.26 6.0 6.0 3.3
1/4FF33M 1/4 - 19 1/4 - 19 14 37 6.0 6.0 3.3 8G5HG5 3/4 - 16 3/4 - 16 1 1.42 5.0 5.0 3.3
3/8x1/4FF33M 3/8 - 19 1/4 - 19 17 37 6.0 6.0 3.3 10G5HG5 7/8 - 14 7/8 - 14 13/16 1.60 4.5 4.5 2.9 Reference
3/8FF33M 3/8 - 19 3/8 - 19 17 37 6.0 6.0 3.3 12G5HG5 11/16 - 12 11/16 - 12 13/8 1.85 4.5 4.5 2.9 Section
1/2FF33M 1/2 - 14 1/2 - 14 22 48 6.0 6.0 3.3 16G5HG5 15/16 - 12 15/16 - 12 15/8 1.85 3.5 3.5 2.2
1/2x3/8FF33M 1/2 - 14 3/8 - 19 22 43 6.0 6.0 3.3
3/4FF33M 3/4 - 14 3/4 - 14 27 50 5.5 5.5 3.3
3/4x1/2FF33M 3/4 - 14 1/2 - 14 27 50 5.5 5.5 3.3
1X3/4FF33M 1 - 11 3/4 - 14 36 55 4.5 4.5 2.9
1FF33M 1 - 11 1 - 11 36 59 4.5 4.5 2.9
GG GG44M
Pipe Coupling BSPP Female Union
NPTF / NPTF BSPP / BSPP
SAE 140138
HPD Base # 0202
Dynamic Dynamic
TUBE C TUBE C6 Pressure
FITTING 1 2 HEX L W W1 (x 1,000 PSI) FITTING 1 2 HEX L (x 1,000 PSI)
PART # NPTF NPTF (in.) (in.) (in.) (in.) -S -SS -B PART # BSPP BSPP (mm) (mm) S SS B
1/8GG 1/8 - 27 1/8 - 27 5/8 0.75 0.63 0.63 6.0 6.0 3.9 1/8GG44M 1/8 - 28 1/8 - 28 14 19.0 6.0 6.0 3.3
1/4x1/8GG 1/4 - 18 1/8 - 27 3/4 0.94 0.75 0.63 6.0 6.0 3.9 1/4X1/8GG44M 1/4 - 19 1/8 - 28 17 24.0 6.0 6.0 3.3
1/4GG 1/4 - 18 1/4 - 18 3/4 1.13 0.75 0.75 6.0 6.0 3.9 1/4GG44M 1/4 - 19 1/4 - 19 17 28.0 6.0 6.0 3.3
3/8x1/8GG 3/8 - 18 1/8 - 27 7/8 1.03 0.88 0.63 6.0 6.0 3.9 3/8GG44M 3/8 - 19 3/8 - 19 22 28.0 6.0 6.0 3.3
3/8x1/4GG 3/8 - 18 1/4 - 18 7/8 1.13 0.88 0.75 6.0 6.0 3.9 3/8x1/4GG44M 3/8 - 19 1/4 - 19 22 28.0 6.0 6.0 3.3
3/8GG 3/8 - 18 3/8 - 18 7/8 1.13 0.88 0.88 6.0 6.0 3.9 1/2x3/8GG44M 1/2 - 14 3/8 - 19 27 31.0 5.0 5.0 3.3
1/2x1/8GG 1/2 - 14 1/8 - 27 11/8 1.06 1.13 0.63 6.0 6.0 3.2 1/2GG44M 1/2 - 14 1/2 - 14 27 32.5 5.0 5.0 3.3
1/2x1/4GG 1/2 - 14 1/4 - 18 11/8 1.38 1.13 0.75 5.0 6.0 3.2 1GG44M 1 - 11 1 - 11 46 42.0 3.0 3.0 1.9
1/2x3/8GG 1/2 - 14 3/8 - 18 11/8 1.50 1.13 0.88 5.0 6.0 3.2
1/2GG 1/2 - 14 1/2 - 14 11/8 1.50 1.13 1.13 5.0 6.0 3.2
3/4x1/4GG 3/4 - 14 1/4 - 18 13/8 1.55 1.36 0.75 4.0 4.8 3.1
3/4x1/2GG 3/4 - 14 1/2 - 14 13/8 1.88 1.36 1.13 4.0 4.8 3.1
3/4GG 3/4 - 14 3/4 - 14 13/8 1.53 1.38 1.38 4.0 4.8 2.6
1GG 1 - 111/2 1 - 111/2 15/8 1.89 1.63 1.63 3.0 3.6 1.9
1x1/2GG 1 - 111/2 1/2 - 14 15/8 1.77 1.63 1.13 3.0 3.6 1.9
1x3/4GG 1 - 111/2 3/4 - 14 15/8 1.77 1.63 1.38 3.0 3.6 1.9
11/4GG 11/4 - 111/2 11/4 - 111/2 2 1.93 2.00 2.00 2.5 3.0 1.9
11/4x1GG 11/4 - 111/2 1 - 111/2 2 1.93 2.00 1.63 2.5 3.0 1.9
11/2GG 11/2 - 111/2 11/2 - 111/2 23/8 1.93 2.38 2.38 2.0 2.4 1.5
11/2x11/4 GG 11/2 - 111/2 11/4 - 111/2 23/8 1.93 2.37 2.37 2.0 2.4 1.5
2GG 2 - 111/2 2 - 111/2 27/8 1.97 2.88 2.88 2.0 2.4 1.5

Columbus, Ohio
F5OG5 F5OG
Straight Thread Reducer / Expander Female Pipe Adapter
SAE-ORB / SAE-ORB SAE-ORB / NPTF
SAE 090136 SAE 090156
HPD Base # 0510 Specs
Dynamic Dynamic
TUBE C TUBE C Pressure
(x 1,000 PSI) Assembly /
FITTING 1 2 HEX L FITTING 1 2 HEX L (x 1,000 PSI)
Installation
PART # UN/UNF-2A UN/UNF-2B (in.) (in.) -S -SS -B PART # UN/UNF-2A NPTF (in.) (in.) -S -SS -B
2-4F5OG5 5/16 - 24 7/16 - 20 11/16 1.03 7.5 7.5 3.3 2-1/8F5OG 5/16 - 24 1/8 - 27 9/16 0.91 6.0 6.0 3.3
4-4F5OG5 7/16 - 20 7/16 - 20 11/16 1.08 7.5 7.5 3.3 4-1/8F5OG 7/16 - 20 1/8 - 27 9/16 1.00 6.0 6.0 3.3
4-6F5OG5 7/16 - 20 9/16 - 18 13/16 1.16 6.0 6.0 3.3 4-1/4F5OG 7/16 - 20 1/4 - 18 3/4 1.16 6.0 6.0 3.3 Reference
6-4F5OG5 9/16 - 18 7/16 - 20 11/16 1.03 6.0 6.0 3.3 5-1/8F5OG 1/2 - 20 1/8 - 27 5/8 1.06 6.0 6.0 3.3 Section
6-6F5OG5 9/16 - 18 9/16 - 18 13/16 1.16 6.0 6.0 3.3 5-1/4F5OG 1/2 - 20 1/4 - 18 3/4 1.19 6.0 6.0 3.3
6-8F5OG5 9/16 - 18 3/4 - 16 11/16 1.38 6.0 6.0 3.3 6-1/8F5OG 9/16 - 18 1/8 - 27 11/16 1.00 6.0 6.0 3.3
8-4F5OG5 3/4 - 16 7/16 - 20 7/8 1.13 6.0 6.0 3.3 6-1/4F5OG 9/16 - 18 1/4 - 18 3/4 1.16 6.0 6.0 3.3
8-6F5OG5 3/4 - 16 9/16 - 18 7/8 1.13 6.0 6.0 3.3 6-3/8F5OG 9/16 - 18 3/8 - 18 7/8 1.28 6.0 6.0 3.3
8-10F5OG5 3/4 - 16 7/8 - 14 11/8 1.56 4.5 4.5 2.9 6-1/2F5OG 9/16 - 18 1/2 - 14 11/8 1.53 5.0 6.0 3.3
10-4F5OG5 7/8 - 14 7/16 - 20 1 0.81 5.0 5.0 3.3 8-1/8F5OG 3/4 - 16 1/8 - 27 7/8 0.80 6.0 6.0 3.3
10-6F5OG5 7/8 - 14 9/16 - 18 1 1.26 5.0 5.0 3.3 8-1/4F5OG 3/4 - 16 1/4 - 18 7/8 1.13 6.0 6.0 3.3
10-8F5OG5 7/8 - 14 3/4 - 16 1 1.31 5.0 5.0 3.3 8-3/8F5OG 3/4 - 16 3/8 - 18 7/8 1.28 6.0 6.0 3.3
10-12F5OG5 7/8 - 14 11/16 - 12 13/8 1.69 4.5 4.5 2.9 8-1/2F5OG 3/4 - 16 1/2 - 14 11/8 1.50 5.0 6.0 3.3
12-4F5OG5 11/16 - 12 7/16 - 20 11/4 1.00 5.0 5.0 3.3 10-1/4F5OG 7/8 - 14 1/4 - 18 1 0.81 5.0 6.0 3.3
12-6F5OG5 11/16 - 12 9/16 - 18 11/4 1.00 5.0 5.0 3.3 10-3/8F5OG 7/8 - 14 3/8 - 18 1 1.31 5.0 6.0 3.3
12-8F5OG5 11/16 - 12 3/4 - 16 11/4 1.45 5.0 5.0 3.3 10-1/2F5OG 7/8 - 14 1/2 - 14 11/8 1.53 5.0 6.0 3.3
12-10F5OG5 11/16 - 12 7/8 - 14 11/4 1.53 5.0 5.0 3.3 10-3/4F5OG 7/8 - 14 3/4 - 14 13/8 1.63 4.0 4.0 2.6
12-16F5OG5 11/16 - 12 15/16 - 12 15/8 1.88 3.5 3.5 2.2 12-1/4F5OG 11/16 - 12 1/4 - 18 11/4 1.00 6.0 6.0 3.3
16-6F5OG5 15/16 - 12 9/16 - 18 11/2 1.00 4.5 4.5 2.9 12-3/8F5OG 11/16 - 12 3/8 - 18 11/4 1.34 5.0 6.0 3.3
16-8F5OG5 15/16 - 12 3/4 - 16 11/2 1.00 4.5 4.5 2.9 12-1/2F5OG 11/16 - 12 1/2 - 14 11/4 1.41 5.0 6.0 3.3
16-10F5OG5 15/16 - 12 7/8 - 14 11/2 1.00 4.5 4.5 2.9 12-3/4F5OG 11/16 - 12 3/4 - 14 13/8 1.72 4.0 4.8 3.1
16-12F5OG5 15/16 - 12 11/16 - 12 11/2 1.75 4.5 4.5 2.9 14-1/2F5OG 13/16 - 12 1/2 - 14 13/8 1.06 5.0 5.0 3.3
16-20F5OG5 15/16 - 12 15/8 - 12 21/8 1.97 3.0 3.0 1.9 14-3/4F5OG 13/16 - 12 3/4 - 14 13/8 1.69 4.0 4.0 2.6
20-6F5OG5 15/8 - 12 9/16 - 18 17/8 1.00 4.0 4.0 2.6 16-1/2F5OG 15/16 - 12 1/2 - 14 11/2 1.00 5.0 6.0 3.3
20-8F5OG5 15/8 - 12 3/4 - 16 17/8 1.00 4.0 4.0 2.6 16-3/4F5OG 15/16 - 12 3/4 - 14 11/2 1.50 4.0 4.8 2.6
20-10F5OG5 15/8 - 12 7/8 - 14 17/8 1.00 4.0 4.0 2.6 16-1F5OG 15/16 - 12 1 - 111/2 15/8 1.88 3.0 3.6 1.9
20-12F5OG5 15/8 - 12 11/16 - 12 17/8 1.00 4.0 4.0 2.6 20-1F5OG 15/8 - 12 1 - 111/2 17/8 1.00 3.0 3.6 1.9
20-16F5OG5 15/8 - 12 15/16 - 12 17/8 1.72 4.0 4.0 2.6 20-11/2F5OG 15/8 - 12 11/2 - 14 21/4 2.16 2.5 3.0 1.6
20-24F5OG5 15/8 - 12 17/8 - 12 21/2 1.88 3.0 3.0 1.9 20-11/4F5OG 15/8 - 12 11/4 - 111/2 2 1.97 3.0 3.0 1.9
24-6F5OG5 17/8 - 12 9/16 - 18 21/8 1.00 3.0 3.0 1.9 24-1F5OG 17/8 - 12 1 - 111/2 21/8 1.00 3.0 3.6 1.9
24-12F5OG5 17/8 - 12 11/16 - 12 21/8 1.00 3.0 3.0 1.9 24-11/4F5OG 17/8 - 12 11/4 - 111/2 21/8 1.94 2.5 2.5 1.6
24-16F5OG5 17/8 - 12 15/16 - 12 21/8 1.00 3.0 3.0 1.9 24-11/2F5OG 17/8 - 12 11/2 - 111/2 21/4 2.00 2.0 2.4 1.3
24-20F5OG5 17/8 - 12 15/8 - 12 21/8 1.75 3.0 3.0 1.9 32-2F5OG 21/2 - 12 2 - 111/2 27/8 2.06 2.0 2.4 1.3
32-20F5OG5 21/2 - 12 15/8 - 12 23/4 1.00 2.0 2.0 1.3
32-24F5OG5 21/2 - 12 17/8 - 12 23/4 1.80 2.0 2.0 1.3
F5OHG8 F5OHG4
Conversion Adapter Conversion Adapter
SAE-ORB / Metric SAE-ORB / BSPP
Dynamic Dynamic
TUBE C TUBE C
FITTING 1 2 HEX L (x 1,000 PSI) FITTING 1 2 HEX L (x 1,000 PSI)
PART # UN/UNF-2A METRIC STR (in.) (in.) S SS B PART # UN/UNF-2A BSPP (in.) (in.) S SS B
4M10F5OHG8 7/16 - 20 M10X1 5/8 0.95 6.0 6.0 3.3 4-1/8F5OHG4 7/16 - 20 1/8 - 28 5/8 0.96 6.0 6.0 3.3
4M12F5OHG8 7/16 - 20 M12X1.5 3/4 1.14 6.0 6.0 3.3 4-1/4F5OHG4 7/16 - 20 1/4 - 19 3/4 1.16 6.0 6.0 3.3
6M14F5OHG8 9/16 - 18 M14X1.5 13/16 1.17 6.0 6.0 3.3 6-1/4F5OHG4 9/16 - 18 1/4 - 19 3/4 1.19 6.0 6.0 3.3
6M16F5OHG8 9/16 - 18 M16X1.5 15/16 1.17 6.0 6.0 3.3 6-3/8F5OHG4 9/16 - 18 3/8 - 19 7/8 1.19 6.0 6.0 3.3
8M16F5OHG8 3/4 - 16 M16X1.5 15/16 1.30 6.0 6.0 3.3 8-1/4F5OHG4 3/4 - 16 1/4 - 19 7/8 1.32 6.0 6.0 3.3
8M18F5OHG8 3/4 - 16 M18X1.5 1 1.30 6.0 6.0 3.3 8-3/8F5OHG4 3/4 - 16 3/8 - 19 15/16 1.32 6.0 6.0 3.3
10M22F5OHG8 7/8 - 14 M22X1.5 13/16 1.46 5.0 5.0 3.3 10-1/2F5OHG4 7/8 - 14 1/2 - 14 11/8 1.52 5.0 5.0 3.3
12M27F5OHG8 11/16 - 12 M27X2 11/2 1.72 5.0 5.0 3.3 12-3/4F5OHG4 11/16 - 12 3/4 - 14 17/16 1.74 4.0 4.0 2.6
16M33F5OHG8 15/16 - 12 M33X2 13/4 1.81 5.0 5.0 3.3 16-1F5OHG4 15/16 - 12 1 - 11 17/8 1.87 3.0 3.0 1.9

Columbus, Ohio
FHG5 FG
Female Straight Thread Adapter Expander / Adapter
NPTF / SAE-ORB NPTF / NPTF
HPD Base # 0110 SAE 140139
HPD Base # 0201 Specs
Dynamic
END SIZE Dynamic
TUBE C Pressure END SIZE Assembly /
TUBE C1 Pressure
FITTING 1 2 HEX L (x 1,000 PSI) Installation
FITTING 1 2 HEX L1 (x 1,000 PSI)
PART # NPTF UN/UNF-2B (in.) (in.) -S -SS -B
1/8-4FHG5 1/8 - 27 7/16 - 20 11/16 1.06 6.0 6.0 3.3
1/8x1/16FG 1/16 - 27 1/8 - 27 5/8 1.03 6.0 6.0 3.3
1/8-5FHG5 1/8 - 27 1/2 - 20 3/4 1.09 6.0 6.0 3.3
1/8FG 1/8 - 27 1/8 - 27 5/8 1.03 6.0 6.0 3.3
1/4-6FHG5 1/4 - 18 9/16 - 18 3/4 1.36 6.0 6.0 3.3 Reference
1/4x1/8FG 1/8 - 27 1/4 - 18 3/4 1.21 6.0 6.0 3.9
3/8-6FHG5 3/8 - 18 9/16 - 18 3/4 1.42 6.0 6.0 3.3 Section
1/4FG 1/4 - 18 1/4 - 18 3/4 1.39 6.0 6.0 3.9
3/8-8FHG5 3/8 - 18 3/4 - 16 1 1.50 5.0 5.0 3.3
3/8x1/8FG 1/8 - 27 3/8 - 18 7/8 1.25 6.0 6.0 3.3
1/2-6FHG5 1/2 - 14 9/16 - 18 7/8 1.58 6.0 6.0 3.3
3/8x1/4FG 1/4 - 18 3/8 - 18 7/8 1.44 6.0 6.0 3.9
1/2-8FHG5 1/2 - 14 3/4 - 16 1 1.66 5.0 5.0 3.3
3/8FG 3/8 - 18 3/8 - 18 7/8 1.44 6.0 6.0 3.9
1/2-10FHG5 1/2 - 14 7/8 - 14 11/4 1.75 4.5 4.5 2.9
1/2x1/8FG 1/8 - 27 1/2 - 14 11/8 1.50 5.0 6.0 3.2
3/4-8FHG5 3/4 - 14 3/4 - 16 11/8 1.13 4.5 4.5 2.9
1/2x1/4FG 1/4 - 18 1/2 - 14 11/8 1.69 5.0 6.0 3.2
3/4-12FHG5 3/4 - 14 11/16 - 12 13/8 1.97 4.5 4.5 2.9
1/2x3/8FG 3/8 - 18 1/2 - 14 11/8 1.69 5.0 6.0 3.2
1-16FHG5 1 - 111/2 15/16 - 12 15/8 2.13 3.5 3.5 2.2
1/2FG 1/2 - 14 1/2 - 14 11/8 1.87 5.0 6.0 3.2
3/4FG 3/4 - 14 3/4 - 14 13/8 1.93 4.0 4.8 2.6
PTR 3/4x1/4FG
3/4x3/8FG
1/4 - 18
3/8 - 18
3/4 - 14
3/4 - 14
13/8
13/8
1.75
1.75
4.0
4.0
4.8
4.8
2.6
2.6
Pipe Thread Reducer 3/4x1/2FG 1/2 - 14 3/4 - 14 13/8 1.93 4.0 4.8 2.6
NPTF / NPTF 1FG 1 - 111/2 1 - 111/2 15/8 2.37 3.0 3.6 2.3
1x1/4FG 1/4 - 18 1 - 111/2 15/8 2.01 3.0 3.6 2.3
SAE 140140 1x1/2FG 1/2 - 14 1 - 111/2 15/8 2.19 3.0 3.6 2.3
HPD Base # 0102 1x3/4FG 3/4 - 14 1 - 111/2 15/8 2.19 3.0 3.6 2.3
11/4FG 11/4 - 111/2 11/4 - 111/2 2 2.50 2.5 3.0 1.9
11/4x1FG 1 - 111/2 11/4 - 111/2 2 2.47 2.5 3.0 1.9
11/2x1FG 1 - 111/2 11/2 - 111/2 23/8 2.47 2.0 2.4 1.5
Dynamic 11/2x11/4FG 11/4 - 111/2 11/2 - 111/2 23/8 2.50 2.0 2.4 1.5
END SIZE Pressure
TUBE C2 2FG 2 - 111/2 2 - 111/2 27/8 2.66 2.0 2.4 1.5
1/4x1/8PTR 1/4 - 18 1/8 - 27 5/8 0.86 6.0 6.0 3.9
3/8x1/8PTR
3/8x1/4PTR
3/8 - 18
3/8 - 18
1/8 - 27
1/4 - 18
3/4 0.86 6.0 6.0 3.9
3/4 0.86 6.0 6.0 3.9
FHG8
1/2x1/8PTR 1/2 - 14 1/8 - 27 7/8 1.11 6.0 6.0 3.2 Conversion Adapter
1/2x1/4PTR 1/2 - 14 1/4 - 18 7/8 1.11 6.0 6.0 3.2 NPTF / Metric
1/2x3/8PTR 1/2 - 14 3/8 - 18 7/8 1.11 6.0 6.0 3.2
3/4x1/8PTR 3/4 - 14 1/8 - 27 11/8 1.17 5.5 6.0 3.3
3/4x1/4PTR 3/4 - 14 1/4 - 18 11/8 1.17 5.5 6.0 3.7
3/4x3/8PTR 3/4 - 14 3/8 - 18 11/8 1.17 5.5 6.0 3.7
3/4x1/2PTR 3/4 - 14 1/2 - 14 11/8 1.17 5.0 6.0 3.3
1x1/8PTR 1 - 111/2 1/8 - 27 13/8 1.36 4.5 5.4 3.3 Dynamic
1x1/4PTR 1 - 111/2 1/4 - 18 13/8 1.36 4.5 5.4 3.3 END SIZE Pressure
TUBE C
1x3/8PTR 1 - 111/2 3/8 - 18 13/8 1.36 4.5 5.4 3.0 FITTING 1 2 HEX L (x 1,000 PSI)
1x1/2PTR 1 - 111/2 1/2 - 14 13/8 1.36 4.5 5.4 3.0 PART # NPTF METRIC STR (in.) (in.) -S -SS -B
1x3/4PTR 1 - 111/2 3/4 - 14 13/8 1.36 4.0 4.8 2.7 1/8M10FHG8 1/8 - 27 M10X1 5/8 0.95 6.0 6.0 3.3
11/4x1/4PTR 11/4 - 111/2 1/4 - 18 13/4 1.47 3.0 3.6 2.3 1/8M12FHG8 1/8 - 27 M12X1.5 3/4 1.16 6.0 6.0 3.3
11/4x3/8PTR 11/4 - 111/2 3/8 - 18 13/4 1.47 3.0 3.6 2.3 1/4M14FHG8 1/4 - 18 M14X1.5 13/16 1.35 6.0 6.0 3.3
11/4x1/2PTR 11/4 - 111/2 1/2 - 14 13/4 1.47 3.0 3.6 2.3 1/4M16FHG8 1/4 - 18 M16X1.5 15/16 1.37 6.0 6.0 3.3
11/4x3/4PTR 11/4 - 111/2 3/4 - 14 13/4 1.47 3.0 3.6 2.3 3/8M18FHG8 3/8 - 18 M18X1.5 1 1.36 6.0 6.0 3.3
11/4x1PTR 11/4 - 111/2 1 - 111/2 13/4 1.47 3.0 3.6 2.3 1/2M22FHG8 1/2 - 14 M22X1.5 13/16 1.65 6.0 5.0 3.3
11/2x1/4PTR 11/2 - 111/2 1/4 - 18 2 1.52 3.0 3.6 2.3 3/4M27FHG8 3/4 - 14 M27X2 11/2 1.77 5.5 4.5 2.9
11/2x3/8PTR 11/2 - 111/2 3/8 - 18 2 1.58 3.0 3.6 2.3
11/2x1/2PTR 11/2 - 111/2 1/2 - 14 2 1.58 3.0 3.6 2.3
11/2x3/4PTR 11/2 - 111/2 3/4 - 14 2 1.58 3.0 3.6 2.3
11/2x1PTR 11/2 - 111/2 1 - 111/2 2 1.58 3.0 3.6 2.3
11/2x11/4PTR 11/2 - 111/2 11/4 - 111/2 2 1.58 2.5 3.0 1.9
2x1/2PTR 2 - 111/2 1/2 - 14 21/2 1.75 2.0 2.4 1.5
2x3/4 2 - 111/2 3/4 - 14 21/2 1.75 2.0 2.4 1.5
2x1PTR 2 - 111/2 1 - 111/2 21/2 1.75 2.0 2.4 1.5
2x11/4PTR 2 - 111/2 11/4 - 111/2 21/2 1.75 2.0 2.4 1.5
2x11/2PTR 2 - 111/2 11/2 - 111/2 21/2 1.75 2.0 2.4 1.5

Columbus, Ohio
FHG4 F87OHG87M
Conversion Adapter Reducer / Expander
NPTF / BSPP ISO 6149 / ISO 6149
Specs
Dynamic Dynamic
END SIZE END SIZE Pressure
TUBE C Pressure TUBE Assembly /
(x 1,000 PSI) FITTING 1 2 C (x 1,000 PSI) Installation
FITTING 1 2 HEX L
PART # NPTF BSPP (in.) (in.) -S -SS -B PART # METRIC STR METRIC STR HEX L S SS B
1/4X1/4FHG4 1/4 - 18 1/4 - 19 3/4 1.33 6.0 6.0 3.3 M8M10F87OHG87M M8X1 M10X1 17 27.0 10.0 6.0 3.3
1/4X3/8FHG4 1/4 - 18 3/8 - 19 13/16 1.40 6.0 6.0 3.3 M10M8F87OHG87M M10X1 M8X1 14 27.5 10.0 7.5 3.3
3/8X1/4FHG4 3/8 - 18 1/4 - 19 3/4 1.31 6.0 6.0 3.3 M10M12F87OHG87M M10X1 M12X1.5 19 30.0 8.0 6.0 3.3 Reference
3/8X3/8FHG4 3/8 - 18 3/8 - 19 1 1.34 6.0 6.0 3.3 M12M10F87OHG87M M12X1.5 M10X1 17 29.5 10.0 6.0 3.3 Section
1/2X3/8FHG4 1/2 - 14 3/8 - 19 15/16 1.50 6.0 6.0 3.3 M12M14F87OHG87M M12X1.5 M14X1.5 22 32.0 7.0 6.0 3.3
M14M16F87OHG87M M14X1.5 M16X1.5 24 33.5 6.0 6.0 3.3
M16M14F87OHG87M M16X1.5 M14X1.5 22 34.0 7.0 6.0 3.3
M16M18F87OHG87M M16X1.5 M18X1.5 27 37.0 6.0 6.0 3.3
M18M16F87OHG87M M18X1.5 M16X1.5 24 37.0 6.0 6.0 3.3
M18M20F87OHG87M M18X1.5 M20X1.5 30 39.5 6.0 6.0 3.3
M20M18F87OHG87M M20X1.5 M18X1.5 27 38.5 6.0 6.0 3.3
M20M22F87OHG87M M20X1.5 M22X1.5 30 39.5 5.0 5.0 3.3
M22M20F87OHG87M M22X1.5 M20X1.5 27 41.5 5.0 5.0 3.3
M27M22F87OHG87M M27X2.0 M22X1.5 32 46.0 5.0 5.0 3.3
M27M33F87OHG87M M27X2.0 M33X2.0 46 52.0 5.0 5.0 3.3
M33M27F87OHG87M M33X2.0 M27X2.0 41 48.0 5.0 5.0 3.3
M33M42F87OHG87M M33X2.0 M42X2.0 55 54.0 4.0 4.0 2.6
M42M27F87OHG87M M42X2.0 M27X2.0 50 54.0 3.0 3.0 1.9
M42M33F87OHG87M M42X2.0 M33X2.0 50 54.0 3.0 3.0 1.9
M42M48F87OHG87M M42X2.0 M48X2.0 65 57.0 2.0 2.0 1.3
F8OHG5 F8OHG
Metric-ORR / SAE-ORB Metric-ORR / NPTF
(for ISO 9974 / DIN 3852-1 Port) (for ISO 9974 / DIN 3852-1 Port)
Dynamic
Dynamic END SIZE
END SIZE TUBE C1 Pressure
TUBE C1 Pressure
PART # METRIC STR NPTF (in.) (in.) -S -SS -B
PART # METRIC STR UN/UNF-2B (in.) (in.) -S -SS -B
M10-1/8F8OHG M10X1.0 1/8 - 27 9/16 0.99 5.0 5.0 3.3
M10-4F8OHG5 M10x1 7/16 - 20 11/16 1.06 5.0 5.0 3.3
M12-1/4F8OHG M12X1.5 1/4 - 18 3/4 1.24 5.0 5.0 3.3
M10-6F8OHG5 M10X1 9/16 - 18 7/8 1.15 5.0 5.0 3.3
M14-1/4F8OHG M14X1.5 1/4 - 18 3/4 1.24 5.0 5.0 3.3
M14-6F8OHG5 M14x1.5 9/16 - 18 13/16 1.19 5.0 5.0 3.3
M16-3/8F8OHG M16X1.5 3/8 - 18 7/8 1.36 5.0 5.0 3.3
M16-8F8OHG5 M16x1.5 3/4 - 16 1 1.31 5.0 5.0 3.3
M16-1/2F8OHG M16X1.5 1/2 - 14 11/8 1.58 5.0 5.0 3.3
M18-8F8OHG5 M18X1.5 3/4 - 16 1 1.38 3.5 3.5 2.2
M18-3/8F8OHG M18X1.5 3/8 - 18 15/16 1.42 5.0 5.0 3.3
M22-10F8OHG5 M22x1.5 7/8 - 14 1 1/8 1.50 3.5 3.5 2.2
M18-1/2F8OHG M18X1.5 1/2 - 14 11/8 1.67 5.0 5.0 3.3
M27-12F8OHG5 M27x2 11/16 - 12 1 1/4 1.88 3.5 3.5 2.2
M22-1/2F8OHG M22X1.5 1/2 - 14 11/8 1.68 3.5 3.5 2.2
M33-16F8OHG5 M33x2 15/16 - 12 1 5/8 1.91 3.0 3.0 1.9
M27-3/4F8OHG M27X2.0 3/4 - 14 13/8 1.87 3.5 3.5 2.2
M42-20F8OHG5 M42x2 15/8 - 12 2 1.91 2.0 2.0 1.3
M33-1F8OHG M33X2.0 1 - 111/2 15/8 2.11 3.0 3.0 1.9

Columbus, Ohio
F4OHG5 F4OHG
BSPP-ORR / SAE-ORB BSPP-ORR / NPTF
(for ISO 1179-1 / DIN 3852-2 Port) (for ISO 1179-1 / DIN 3852-2 Port)
Specs
Dynamic
Dynamic END SIZE Assembly /
END SIZE TUBE C6 Pressure
Pressure Installation
TUBE C1 FITTING 1 2 HEX L (x 1,000 PSI)
PART # BSPP NPTF (in.) (in.) -S -SS -B
PART # BSPP UN/UNF-2B (in.) (in.) -S -SS -B
1/8x1/8F4OHG 1/8 - 28 1/8 - 27 5/8 0.97 5.0 5.0 3.3
1/8-4F4OHG5 1/8 - 28 7/16 - 20 11/16 1.00 5.0 5.0 3.3
1/4x1/4F4OHG 1/4 - 19 1/4 - 18 3/4 1.28 5.0 5.0 3.3 Reference
1/4-4F4OHG5 1/4 - 19 7/16 - 20 3/4 1.11 5.0 5.0 3.3
3/8x3/8F4OHG 3/8 - 19 3/8 - 18 7/8 1.33 5.0 5.0 3.3 Section
1/4-6F4OHG5 1/4 - 19 9/16 - 18 13/16 1.25 5.0 5.0 3.3
1/2x1/2F4OHG 1/2 - 14 1/2 - 14 11/8 1.73 3.5 3.5 2.2
3/8-4F4OHG5 3/8 - 19 7/16 - 20 7/8 1.19 5.0 5.0 3.3
3/4x3/4F4OHG 3/4 - 14 3/4 - 14 13/8 1.77 3.5 3.5 2.2
3/8-5F4OHG5 3/8 - 19 1/2 - 20 7/8 1.19 5.0 5.0 3.3
1x1F4OHG 1 - 11 1 - 11 1/2 15/8 2.17 3.0 3.0 1.9
3/8-6F4OHG5 3/8 - 19 9/16 - 18 7/8 1.25 5.0 5.0 3.3
3/8-8F4OHG5 3/8 - 19 3/4 - 16 1 1.33 5.0 5.0 3.3
1/2-10F4OHG5 1/2 - 14 7/8 - 14 1 1/8 1.60 3.5 3.5 2.2
3/4-12F4OHG5 3/4 - 14 11/16 - 12 1 3/8 1.74 3.5 3.5 2.2
1-16F4OHG5 1 - 11 15/16 - 12 1 3/4 1.92 3.5 3.5 2.2
11/4-16F4OHG5 11/4 - 11 15/16 - 12 2 1.95 2.0 2.0 1.3
11/4-20F4OHG5 11/4 - 11 15/8 - 12 2 1.95 2.0 2.0 1.3
PTR34M
BSPT Reducing Adapter
BSPT / BSPP
Dynamic
END SIZE Pressure
TUBE
FITTING 1 2 C2 L2 (x 1,000 PSI)
PART # BSPT BSPP (mm) (mm) S SS B
1/4X1/8PTR34M 1/4-19 1/8-28 17 28 6.0 6.0 3.3
3/8X1/4PTR34M 3/8-19 1/4-19 19 33 6.0 6.0 3.3
1/2X1/4PTR34M 1/2-14 1/4-19 22 39 5.0 5.0 3.3
1/2X3/8PTR34M 1/2-14 3/8-19 22 39 5.0 5.0 3.3

Columbus, Ohio
RI-ED
BSPP Reducing Adatper / Expander
BSPP / BSPP-ED
(for ISO 1179-1 / DIN 3852-2 Port)
Specs
Dynamic Assembly /
TUBE END SIZE Pressure Installation
FITTING 1 2 d3 L S1 (x 1,000 PSI)
PART # BSPP BSPP (mm) (mm) (mm) Fig. CF 71 MS
RI1/8EDX1/4 1/8 - 28 1/4 - 19 14 31.0 19 B 5.8 5.8 3.3
RI1/8EDX3/8 1/8 - 28 3/8 - 19 14 32.0 24 B 5.8 5.8 3.3 Reference
RI1/4EDX1/8 1/4 - 19 1/8 - 28 19 29.0 19 B 5.8 5.8 3.3 Section
RI1/4EDX3/8 1/4 - 19 3/8 - 19 19 36.0 24 B 5.8 5.8 3.3
RI1/4EDX1/2 1/4 - 19 1/2 - 14 19 40.0 30 B 5.8 5.8 3.3
RI1/4EDX3/4 1/4 - 19 3/4 - 14 19 43.0 36 B 5.8 5.8 3.3
RI3/8EDX1/8 3/8 - 19 1/8 - 28 22 22.5 22 A 5.8 5.8 3.3
RI3/8EDX1/4 3/8 - 19 1/4 - 19 22 36.0 22 B 5.8 5.8 3.3
RI3/8EDX1/2 3/8 - 19 1/2 - 14 22 41.0 30 B 5.8 5.8 3.3
RI3/8EDX3/4 3/8 - 19 3/4 - 14 22 44.0 36 B 4.5 4.5 3.0
RI1/2EDX1/8 1/2 - 14 1/8 - 28 27 24.0 27 A 5.8 5.8 3.3
RI1/2EDX1/4 1/2 - 14 1/4 - 19 27 24.0 27 A 5.8 5.8 3.3
RI1/2EDX3/8 1/2 - 14 3/8 - 19 27 37.0 27 B 5.8 5.8 3.3
RI1/2EDX3/4 1/2 - 14 3/4 - 14 27 46.0 36 B 4.5 4.5 3.0
RI1/2EDX1 1/2 - 14 1 - 11 27 49.0 41 B 4.5 4.5 3.0
RI1/2EDX11/4 1/2 - 14 11/4 - 11 27 53.0 55 B 4.5 4.5 3.0
RI3/4EDX1/4 3/4 - 14 1/4 - 19 32 26.0 32 A 4.5 4.5 3.0
RI3/4EDX3/8 3/4 - 14 3/8 - 19 32 26.0 32 A 4.5 4.5 3.0
RI3/4EDX1/2 3/4 - 14 1/2 - 14 32 43.0 32 B 4.5 4.5 3.0
RI3/4EDX1 3/4 - 14 1 - 11 32 51.0 41 B 4.5 4.5 3.0
RI3/4EDX11/4 3/4 - 14 11/4 - 11 32 55.0 55 B 4.5 4.5 3.0
RI3/4EDX11/2 3/4 - 14 11/2 - 11 32 57.0 60 B 3.6 3.6 2.3
RI1EDX1/4 1 - 11 1/4 - 19 40 29.0 41 A 4.5 4.5 3.0
RI1EDX3/8 1 - 11 3/8 - 19 40 29.0 41 A 4.5 4.5 3.0
RI1EDX1/2 1 - 11 1/2 - 14 40 29.0 41 A 4.5 4.5 3.0
RI1EDX3/4 1 - 11 3/4 - 14 40 49.0 41 B 4.5 4.5 3.0
RI1EDX11/4 1 - 11 11/4 - 11 40 57.0 55 B 4.5 4.5 3.0
RI1EDX11/2 1 - 11 11/2 - 11 40 59.0 60 B 3.6 3.6 2.3
RI11/4EDX1/2 11/4 - 11 1/2 - 14 50 32.0 50 A 4.5 4.5 3.0
RI11/4EDX3/4 11/4 - 11 3/4 - 14 50 32.0 50 A 4.5 4.5 3.0
RI11/4EDX1 11/4 - 11 1 - 11 50 53.0 50 B 4.5 4.5 3.0
RI11/4EDX11/2 11/4 - 11 11/2 - 11 50 60.0 60 B 3.6 3.6 2.3
RI11/2EDX1/2 11/2 - 11 1/2 - 14 55 36.0 55 A 3.6 3.6 2.3
RI11/2EDX3/4 11/2 - 11 3/4 - 14 55 36.0 55 A 3.6 3.6 2.3
RI11/2EDX1 11/2 - 11 1 - 11 55 36.0 55 A 3.6 3.6 2.3
RI11/2EDX11/4 11/2 - 11 11/4 - 11 55 58.0 55 B 3.6 3.6 2.3
RI2EDX11/2 2 - 11 11/2 - 11 72 65.0 75 B 2.3 2.3 1.5

Columbus, Ohio
RI
BSPP Reducing Adatper / Expander
BSPP / BSPP-CF
(for ISO 1179-1 / DIN 3852-2 Port)
Specs
Dynamic Assembly /
END SIZE Pressure
TUBE Installation
FITTING 1 2 d3 L S1 (x 1,000 PSI)
PART # BSPP BSPP (mm) (mm) (mm) Fig. CF 71 MS
RI1/8X1/4CFX 1/8 - 28 1/4 - 19 14 31.0 19 B 5.8 5.8 3.3
RI1/8X3/8CFX 1/8 - 28 3/8 - 19 14 32.0 24 B 5.8 5.8 3.3 Reference
RI1/4X1/8CFX 1/4 - 19 1/8 - 28 18 28.0 19 B 5.8 5.8 3.3 Section
RI1/4X3/8CFX 1/4 - 19 3/8 - 19 18 36.0 24 B 5.8 5.8 3.3
RI1/4X1/2CFX 1/4 - 19 1/2 - 14 18 40.0 30 B 5.8 5.8 3.3
RI1/4X3/4CFX 1/4 - 19 3/4 - 14 18 43.0 36 B 4.5 4.5 3.0
RI3/8X1/8CFX 3/8 - 19 1/8 - 28 22 22.5 22 A 5.8 5.8 3.3
RI3/8X1/4CFX 3/8 - 19 1/4 - 19 22 36.0 22 B 5.8 5.8 3.3
RI3/8X1/2CFX 3/8 - 19 1/2 - 14 22 41.0 30 B 5.8 5.8 3.3
RI3/8X3/4CFX 3/8 - 19 3/4 - 14 22 44.0 36 B 4.5 4.5 3.0
RI1/2X1/8CFX 1/2 - 14 1/8 - 28 26 24.0 27 A 5.8 5.8 3.3
RI1/2X1/4CFX 1/2 - 14 1/4 - 19 26 24.0 27 A 4.5 4.5 3.0
RI1/2X3/8CFX 1/2 - 14 3/8 - 19 26 36.0 27 B 4.5 4.5 3.0
RI1/2X3/4CFX 1/2 - 14 3/4 - 14 26 46.0 36 B 4.5 4.5 3.0
RI1/2X1CFX 1/2 - 14 1 - 11 26 49.0 41 B 2.3 2.3 1.5
RI1/2X11/4CFX 1/2 - 14 1 1/4 - 11 26 53.0 55 B 4.5 4.5 3.0
RI3/4X1/4CFX 3/4 - 14 1/4 - 19 32 26.0 32 A 4.5 4.5 3.0
RI3/4X3/8CFX 3/4 - 14 3/8 - 19 32 26.0 32 A 4.5 4.5 3.0
RI3/4X1/2CFX 3/4 - 14 1/2 - 14 32 41.0 32 B 4.5 4.5 3.0
RI3/4X1CFX 3/4 - 14 1 - 11 32 51.0 41 B 2.3 2.3 1.5
RI3/4X11/4CFX 3/4 - 14 1 1/4 - 11 32 55.0 55 B 2.3 2.3 1.5
RI3/4X11/2CFX 3/4 - 14 1 1/2 - 11 32 57.0 60 B 4.5 4.5 3.0
RI1X1/4CFX 1 - 11 1/4 - 19 39 29.0 41 A 4.5 4.5 3.0
RI1X3/8CFX 1 - 11 3/8 - 19 39 29.0 41 A 4.5 4.5 3.0
RI1X1/2CFX 1 - 11 1/2 - 14 39 29.0 41 A 4.5 4.5 3.0
RI1X3/4CFX 1 - 11 3/4 - 14 39 47.0 41 B 2.3 2.3 1.5
RI1X11/4CFX 1 - 11 1 1/4 - 11 39 57.0 55 B 2.3 2.3 1.5
RI1X11/2CFX 1 - 11 1 1/2 - 11 39 59.0 60 B 2.3 2.3 1.5
RI11/4X1/2CFX 1 1/4 - 11 1/2 - 14 49 32.0 50 A 2.3 2.3 1.5
RI11/4X3/4CFX 1 1/4 - 11 3/4 - 14 49 32.0 50 A 2.3 2.3 1.5
RI11/4X1CFX 1 1/4 - 11 1 - 11 49 52.0 50 B 2.3 2.3 1.5
RI11/4X11/2CFX 1 1/4 - 11 1 1/2 - 11 49 60.0 60 B 2.3 2.3 1.5
RI11/2X1/2CFX 1 1/2 - 11 1/2 - 14 55 36.0 55 A 2.3 2.3 1.5
RI11/2X3/4CFX 1 1/2 - 11 3/4 - 14 55 36.0 55 A 2.3 2.3 1.5
RI11/2X1CFX 1 1/2 - 11 1 - 11 55 36.0 55 A 2.3 2.3 1.5
RI11/2X11/4CFX 1 1/2 - 11 1 1/4 - 11 55 58.0 55 B 2.3 2.3 1.5
RI2X11/2CFX 2 - 11 1 1/2 - 11 68 62.0 70 B 2.3 2.3 1.5

Columbus, Ohio
F3HG F3HG5
NPTF / BSPT BSPT / SAE-ORB
Specs
Dynamic
Pressure Dynamic
END SIZE Pressure
TUBE END SIZE C6 (x 1,000 PSI) TUBE C1
(x 1,000 PSI) Assembly /
FITTING 1 2 HEX L FITTING 1 2 HEX L Installation
PART # BSPT NPTF (in.) (mm) -S -SS -B PART # BSPT UN/UNF-2B (in.) (in.) -S -SS -B
1/8x1/8F3HG 1/8 - 38 1/8 - 27 9/16 1.08 6.0 6.0 3.3 1/8-4F3HG5 1/8 - 28 7/16 - 20 11/16 1.09 6.0 6.0 3.3
1/4x1/4F3HG 1/4 - 19 1/4 - 18 3/4 1.37 6.0 6.0 3.3 1/8-5F3HG5 1/8 - 28 1/2 - 20 3/4 1.09 6.0 6.0 3.3
3/8x3/8F3HG 3/8 - 19 3/8 - 19 7/8 1.38 6.0 6.0 3.3
F
1/4-6F3HG5 1/4 - 19 9/16 - 18 13/16 1.36 6.0 6.0 3.3 Reference
1/2x1/2F3HG 1/2 - 14 1/2 - 14 11/8 1.88 5.0 5.0 3.3
3/4x3/4F3HG 3/4 - 14 3/4 - 14 13/8 1.95 4.0 4.0 2.6 3/8-8F3HG5 3/8 - 19 3/4 - 16 1 1.45 5.0 5.0 3.3 Section
1x1F3HG 1 - 11 1 - 11 15/8 2.38 3.0 3.0 1.9 1/2-10F3HG5 1/2 - 14 7/8 - 14 1 1/8 1.78 4.5 4.5 2.9
11/2 x1 1/2F3HG 1 1/2 - 11 1 1/2 - 11 2 3/8 2.53 2.0 2.0 1.3 3/4-12F3HG5 3/4 - 14 11/16 - 12 1 3/8 1.92 4.5 4.5 2.9
1-16F3HG5 1 - 11 15/16 - 12 1 5/8 2.13 3.5 3.5 2.2
CD45 DD45
45 Pipe Elbow 45 Female Pipe Elbow
SAE 140339 SAE 140338
HPD Base # 3102 HPD Base # 4202
Dynamic Dynamic
TUBE TUBE Pressure
FITTING 1 2 N3 N4 Y (x 1,000 PSI) (x 1,000 PSI)
FITTING 1 2 N2 Y
PART # NPTF NPTF (in.) (in.) (in.) -S -SS -B PART # NPTF NPTF (in.) (in.) -S -SS -B
1/8CD45 1/8 - 27 1/8 - 27 0.47 0.72 9/16 5.0 5.0 3.2 1/4DD45 1/4 - 18 1/4 - 18 0.69 3/4 5.0 5.0 3.3
1/4CD45 1/4 - 18 1/4 - 18 0.63 1.05 3/4 5.0 5.0 3.2 3/8DD45 3/8 - 18 3/8 - 18 0.75 7/8 4.5 4.5 2.9
3/8CD45 3/8 - 18 3/8 - 18 0.72 1.06 7/8 4.5 4.5 2.9 1/2DD45 1/2 - 14 1/2 - 14 0.94 11/16 3.0 3.0 1.9
1/2CD45 1/2 - 14 1/2 - 14 0.91 1.34 11/16 3.0 3.0 1.9 3/4DD45 3/4 - 14 3/4 - 14 1.00 15/16 3.0 3.0 1.9
3/4CD45 3/4 - 14 3/4 - 14 0.97 1.38 15/16 3.0 3.0 1.9 1DD45 1 - 111/2 1 - 111/2 1.19 15/8 1.8 1.8 1.1
1CD45 1 - 111/2 1 - 111/2 1.13 1.72 15/8 1.8 1.8 1.1
11/4CD45 11/4 - 111/2 11/4 - 111/2 1.63 1.80 17/8 1.5 1.5 1.0
AOEG5 AOEG
Straight Thread Elbow Female Pipe Elbow
SAE-ORB / SAE-ORB NPT / SAE-ORB
* Y Across
Wrench Flats
Dynamic
Dynamic END SIZE
END SIZE TUBE Pressure
TUBE Pressure
FITTING 1 2 M N Y (x 1,000 PSI)
FITTING 1 2 M N1 Y (x 1,000 PSI)
PART # UN/UNF-2A NPTF (in.) (in.) (in.) -S -SS -B
PART # UN/UNF-2A UN/UNF-2B (in.) (in.) (in.) -S -SS -B
6-1/4AOEG 9/16 - 18 1/4 - 18 1.34 0.63 3/4 5.0 5.0 3.3
4AOEG5 7/16 - 20 7/16 - 20 1.23 0.63 3/4 6.0 6.0 3.3
8-3/8AOEG 3/4 - 16 3/8 - 18 1.47 0.63 7/8 4.5 4.5 2.9
6AOEG5 9/16 - 18 9/16 - 18 1.38 0.75 7/8 5.0 5.0 3.3
10-1/2AOEG 7/8 - 14 1/2 - 14 1.81 0.75 11/16 3.0 3.0 1.9
8AOEG5 3/4 - 16 3/4 - 16 1.59 0.88 11/16 4.0 4.0 2.6
12-3/4AOEG 11/16 - 12 3/4 - 14 2.00 0.81 15/16 3.0 3.0 1.9
10AOEG5 7/8 - 14 7/8 - 14 1.81 1.02 11/16 2.5 2.5 1.6
16-1AOEG 15/16 - 12 1 - 111/2 2.25 1.00 15/8 1.8 1.8 1.1
12AOEG5 11/16 - 12 11/16 - 12 2.00 1.21 15/16 2.5 2.5 1.6
16AOEG5 15/16 - 12 15/16 - 12 2.26 1.33 15/8 2.5 2.5 1.6

Columbus, Ohio
AOE4G CR
Extra Long Female Pipe Elbow Male Pipe Elbow
NPTF / SAE-ORB NPTF / NPTF
HPD Base # 5502 SAE 140237*
Specs
* Y Across
Wrench Flats
Assembly /
Dynamic Dynamic Installation
TUBE TUBE Pressure
FITTING 1 2 M1 N Y (x 1,000 PSI) (x 1,000 PSI)
FITTING 1 2 N N1 Y
PART # UN/UNF-2A NPTF (in.) (in.) (in.) -S -SS -B PART # NPTF NPTF (in.) (in.) (in.) -S -SS -B
8-3/8AOE4G 3/4 - 16 3/8 - 18 2.94 0.63 7/8 4.5 4.5 2.9 1/8CR 1/8 - 27 1/8 - 27 0.78 0.78 7/16 6.0 6.0 3.9 Reference
10-1/2AOE4G 7/8 - 14 1/2 - 14 3.56 0.75 11/16 3.0 3.0 1.9 1/4CR 1/4 - 18 1/4 - 18 1.09 1.09 9/16 6.0 6.0 3.9 Section
12-3/4AOE4G 11/16 - 12 3/4 - 14 4.06 0.81 15/16 3.0 3.0 1.9 3/8CR 3/8 - 18 3/8 - 18 1.22 1.22 3/4 6.0 6.0 3.9
16-1AOE4G 15/16 - 12 1 - 111/2 4.63 1.00 15/8 1.8 1.8 1.1 3/8x1/4CR 3/8 - 18 1/4 - 18 1.22 1.22 3/4 6.0 6.0 3.3
1/2CR 1/2 - 14 1/2 - 14 1.47 1.47 7/8 6.0 6.0 3.9
1/2x3/8CR 1/2 - 14 3/8 - 18 1.47 1.28 7/8 6.0 6.0 3.3
3/4CR 3/4 - 14 3/4 - 14 1.59 1.59 11/16 4.0 4.0 2.6
3/4x1/2CR 3/4 - 14 1/2 - 14 1.59 1.47 11/16 4.0 4.0 2.6
1CR 1 - 111/2 1 - 111/2 1.97 1.97 15/16 3.0 3.0 1.9
1x3/4CR 1 - 111/2 3/4 - 14 1.97 1.78 15/16 3.0 3.0 1.9
11/4CR 11/4 - 111/2 11/4 - 111/2 2.22 2.22 17/8 2.5 2.5 1.6
11/2CR 11/2 - 111/2 11/2 - 111/2 2.34 2.34 17/8 2.5 2.5 1.6
* Not shown in SAE J514, but coded per SAE J846.
CD DD
Street Elbow Female Pipe Elbow
SAE 140239 SAE 140238
Dynamic Dynamic
TUBE TUBE
FITTING 1 2 N N1 Y (x 1,000 PSI) FITTING 1 2 N1 Y (x 1,000 PSI)
PART # NPTF NPTF (in.) (in.) (in.) -S -SS -B PART # NPTF NPTF (in.) (in.) -S -SS -B
1/8CD 1/8 - 27 1/8 - 27 0.78 0.66 9/16 5.0 5.0 3.2 1/8DD 1/8 - 27 1/8 - 27 0.66 9/16 5.0 5.0 3.2
1/8x1/4CD 1/8 - 27 1/4 - 18 0.90 0.88 9/16 5.0 5.0 3.2 1/4DD 1/4 - 18 1/4 - 18 0.88 3/4 5.0 5.0 3.2
1/4CD 1/4 - 18 1/4 - 18 1.09 0.88 3/4 5.0 5.0 3.2 3/8DD 3/8 - 18 3/8 - 18 1.02 7/8 4.5 4.5 3.0
1/4x1/8CD 1/4 - 18 1/8 - 27 1.09 0.66 9/16 5.0 5.0 3.2 1/2DD 1/2 - 14 1/2 - 14 1.23 11/16 3.0 3.0 1.9
1/4x1/2CD 1/4 - 18 1/2 - 14 1.28 1.23 11/16 3.0 3.0 1.9 1/2x3/8 DD 1/2 - 14 3/8 - 18 1.23 11/16 3.0 3.0 1.9
1/4x3/8CD 1/4 - 18 3/8 - 18 1.22 1.01 7/8 4.5 4.5 2.9 3/4DD 3/4 - 14 3/4 - 14 1.36 15/8 3.0 3.0 1.9
3/8CD 3/8 - 18 3/8 - 18 1.22 1.02 7/8 4.5 4.5 3.0 1DD 1 - 111/2 1 - 111/2 1.63 17/8 1.8 1.8 1.2
3/8x1/4CD 3/8 - 18 1/4 - 18 1.22 0.88 3/4 5.0 5.0 3.2 11/4DD 11/4 - 111/2 11/4 - 111/2 1.70 17/8 1.5 1.5 1.5
3/8x1/2CD 3/8 - 18 1/2 - 14 1.28 1.23 11/16 3.0 3.0 1.9 11/2DD 11/2 - 111/2 11/2 - 111/2 2.08 21/2 1.5 1.5 1.5
1/2CD 1/2 - 14 1/2 - 14 1.47 1.23 11/16 3.0 3.0 1.9
1/2x3/8CD 1/2 - 14 3/8 - 18 1.48 1.25 7/8 4.5 4.5 2.9
1/2x3/4CD 1/2 - 14 3/4 - 14 1.58 1.36 15/16 3.0 3.0 1.9
3/4CD 3/4 - 14 3/4 - 14 1.59 1.36 15/16 3.0 3.0 1.9
3/4x1/2CD 3/4 - 14 1/2 - 14 1.59 1.23 11/16 3.0 3.0 1.9
1CD 1 - 111/2 1 - 111/2 1.97 1.63 15/8 1.8 1.8 1.2
11/4CD 11/4 - 111/2 11/4 - 111/2 2.38 1.70 17/8 1.5 1.5 1.0
11/4x11/2CD 11/4 - 111/2 11/2 - 111/2 2.61 2.08 21/2 1.5 1.5 1.0
11/2CD 11/2 - 111/2 11/2 - 111/2 2.64 2.08 21/2 1.5 1.5 1.0

Columbus, Ohio
A87LPOEG87LPM
ISO 6149* Female Elbow
SHORT ISO 6149 / SHORT ISO 6149
Specs
Assembly /
END SIZE Dynamic Installation
TUBE Pressure
FITTING 1 2 I L1 L2 S1 (x 1,000 PSI)
PART # Metric Metric (mm) (mm) (mm) (mm) S SS B
M08A87LPOEG87LPM M8X1 M8X1 8.5 13.5 7.5 15 4.0 4.0 2.6 Reference
M10A87LPOEG87LPM M10X1 M10X1 8.5 14.5 7.5 15 4.0 4.0 2.6 Section
M12A87LPOEG87LPM M12X1.5 M12X1.5 11.0 17.0 10.0 20 3.6 3.6 2.3
M14A87LPOEG87LPM M14X1.5 M14X1.5 11.0 18.0 10.0 20 3.6 3.6 2.3
* Male and female thread lengths have been shortened for compact design. The
lengths do not conform to ISO 6149.
G5G5JAO
Straight Thread Branch Tee
SAE-ORB (all three ends)
* Y Across
Wrench Flats
Dynamic
END SIZE Pressure
TUBE
FITTING 1 2 3 M N1 Y (x 1,000 PSI)
PART # UN/UNF-2B UN/UNF-2B UN/UNF-2A (in.) (in.) (in.) S SS B
4G5G5JAO 7/16 - 20 7/16 - 20 7/16 - 20 1.23 0.63 3/4 6.0 6.0 3.3
6G5G5JAO 9/16 - 18 9/16 - 18 9/16 - 18 1.38 0.75 7/8 5.0 5.0 3.3
8G5G5JAO 3/4 - 16 3/4 - 16 3/4 - 16 1.59 0.88 11/16 4.0 4.0 2.6
10G5G5JAO 7/8 - 14 7/8 - 14 7/8 - 14 1.81 1.02 11/16 2.5 2.5 1.6
12G5G5JAO 11/16 - 12 11/16 - 12 11/16 - 12 2.00 1.21 15/16 2.5 2.5 1.6
16G5G5JAO 15/16 - 12 15/16 - 12 15/16 - 12 2.25 1.33 15/8 2.5 2.5 1.6

Columbus, Ohio
AOG5JG5
Straight Thread Run Tee
SAE-ORB (all three ends)
* Y Across Wrench Flats Specs
Dynamic
END SIZE Pressure Assembly /
TUBE
FITTING 1 2 3 M N2 Y (x 1,000 PSI) Installation
PART # UN/UNF-2A UN/UNF-2B UN/UNF-2B (in.) (in.) (in.) -S -SS -B
4AOG5JG5 7/16 - 20 7/16 - 20 7/16 - 20 1.23 0.74 3/4 6.0 6.0 3.3
6AOG5JG5 9/16 - 18 9/16 - 18 9/16 - 18 1.38 0.86 7/8 5.0 5.0 3.3
8AOG5JG5 3/4 - 16 3/4 - 16 3/4 - 16 1.59 1.03 11/16 4.0 4.0 2.6 Reference
10AOG5JG5 7/8 - 14 7/8 - 14 7/8 - 14 1.81 1.18 11/16 2.5 2.5 1.6 Section
12AOG5JG5 11/16 - 12 11/16 - 12 11/16 - 12 2.00 1.39 15/16 2.5 2.5 1.6
16AOG5JG5 15/16 - 12 15/16 - 12 15/16 - 12 2.25 1.52 15/8 2.5 2.5 1.6
G5G5JG5 RRS
Female Straight Thread Tee Male Pipe Tee
SAE-ORB (all three ends) NPTF (all three ends)
SAE 140437
* Y Across
Wrench Flats
Dynamic Dynamic
TUBE TUBE
FITTING 1-3 N2 Y (x 1,000 PSI) FITTING 1-3 N Y (x 1,000 PSI)
PART # UN/UNF-2B (in.) (in.) -S -SS -B PART # NPTF (in.) (in.) -S -SS -B
4G5G5JG5 7/16 - 20 0.74 3/4 6.0 6.0 3.3 1/8RRS 1/8 - 27 0.78 7/16 6.0 6.0 3.9
6G5G5JG5 9/16 - 18 0.86 3/4 5.0 5.0 3.3 1/4RRS 1/4 - 18 1.09 9/16 6.0 6.0 3.9
8G5G5JG5 3/4 - 16 1.03 11/16 4.0 4.0 2.6 3/8RRS 3/8 - 18 1.22 3/4 6.0 6.0 3.9
10G5G5JG5 7/8 - 14 1.18 11/16 2.5 2.5 1.6 1/2RRS 1/2 - 14 1.47 7/8 6.0 6.0 3.9
12G5G5JG5 11/16 - 12 1.39 15/16 2.5 2.5 1.6 3/4RRS 3/4 - 14 1.59 11/16 4.0 4.0 2.6
16G5G5JG5 15/16 - 12 1.52 15/8 2.5 2.5 1.6
MMS MRO
Male Branch Tee Male Run Tee
NPTF (all three ends) NPTF (all three ends)
SAE 140425 SAE 140424
HPD Base # 212T HPD Base # 012T
Dynamic Dynamic
TUBE Pressure TUBE
(x 1,000 PSI) FITTING 1-3 N N1 Y (x 1,000 PSI)
FITTING 1-3 N N1 Y
PART # NPTF (in.) (in.) (in.) -S -SS -B PART # NPTF (in.) (in.) (in.) -S -SS -B
1/8MMS 1/8 - 27 0.78 0.66 9/16 5.0 5.0 3.2 1/8MRO 1/8 - 27 0.78 0.66 9/16 5.0 5.0 3.2
1/4MMS 1/4 - 18 1.09 0.88 3/4 5.0 5.0 3.2 1/4MRO 1/4 - 18 1.09 0.88 3/4 5.0 5.0 3.2
3/8MMS 3/8 - 18 1.22 1.02 7/8 4.5 4.5 3.0 3/8MRO 3/8 - 18 1.22 1.02 7/8 4.5 4.5 3.0
1/2MMS 1/2 - 14 1.47 1.23 11/16 3.0 3.0 1.9 1/2MRO 1/2 - 14 1.47 1.23 11/16 3.0 3.0 1.9
3/4MMS 3/4 - 14 1.59 1.36 15/16 3.0 3.0 1.9 3/4MRO 3/4 - 14 1.59 1.36 15/16 3.0 3.0 1.9
1MMS 1 - 111/2 1.97 1.62 15/8 1.8 1.8 1.1 1MRO 1 - 111/2 1.97 1.63 15/8 1.8 1.8 1.1
11/4MRO 11/4 - 111/2 2.38 1.70 17/8 1.5 1.5 1.0
11/2MRO 11/2 - 111/2 2.64 2.08 21/2 1.5 1.5 1.0

Columbus, Ohio
MMO MMO444M
Female Pipe Tee Female BSPP Tee
NPTF (all three ends) BSPP (all three ends)
SAE 140438
HPD Base # 022T Specs
Dynamic Dynamic
TUBE Pressure Assembly /
(x 1,000 PSI) TUBE
FITTING 1-3 N1 Y (x 1,000 PSI) Installation
FITTING 1-3 N2 Y
PART # NPTF (in.) (in.) -S -SS -B PART # BSPP (mm) (mm) S SS B
1/8MMO 1/8 - 27 0.66 9/16 5.0 5.0 3.2 1/4MMO444M 1/4 - 19 22 19 5.0 5.0 3.3
1/4MMO 1/4 - 18 0.88 3/4 5.0 5.0 3.2 3/8MMO444M 3/8 - 19 26 22 4.5 4.5 2.9
3/8MMO 3/8 - 18 1.02 7/8 4.5 4.5 3.0 Reference
1/2MMO444M 1/2 - 14 31 27 3.0 3.0 1.9
1/2MMO 1/2 - 14 1.23 11/16 3.0 3.0 1.9 Section
3/4MMO444M 3/4 - 14 40 33 3.0 3.0 1.9
3/4MMO 3/4 - 14 1.36 15/16 3.0 3.0 1.9 1MMO444M 1 - 11 46 41 1.8 1.8 1.1
1MMO 1 - 111/2 1.63 15/8 1.8 1.8 1.2
11/4MMO 11/4 - 111/2 1.70 17/8 1.5 1.5 1.0
11/2MMO 11/2 - 111/2 2.08 21/2 1.5 1.5 1.0
KMMOO P5ON
Female Pipe Cross Hex Head Plug
NPTF (all four ends) SAE-ORB
SAE 140538 SAE 090109A
HPD Base # 022X HPD Base # 05CP
Dynamic Dynamic
TUBE Pressure TUBE C4
(x 1,000 PSI) FITTING 1 HEX I1 L (x 1,000 PSI)
FITTING 1-4 N1 Y
PART # NPTF (in.) (in.) S SS B PART # UN/UNF-2A (in.) (in.) (in.) -S -SS -B
1/8KMMOO 1/8 - 27 0.66 9/16 5.0 5.0 3.2 2P5ON 5/16 - 24 7/16 0.30 0.60 7.5 9.0 3.3
1/4KMMOO 1/4 - 18 0.88 3/4 5.0 5.0 3.2 3P5ON 3/8 - 24 1/2 0.30 0.60 7.5 9.0 3.3
3/8KMMOO 3/8 - 18 1.02 7/8 4.5 4.5 2.9 4P5ON 7/16 - 20 9/16 0.36 0.67 7.5 9.0 3.3
1/2KMMOO 1/2 - 14 1.23 11/16 3.0 3.0 1.9 5P5ON 1/2 - 20 5/8 0.36 0.67 6.0 7.2 3.3
3/4KMMOO 3/4 - 14 1.36 15/16 3.0 3.0 1.9 6P5ON 9/16 - 18 11/16 0.39 0.73 6.0 7.2 3.3
1KMMOO 1 - 111/2 1.63 15/8 1.8 1.8 1.1 8P5ON 3/4 - 16 7/8 0.44 0.80 6.0 7.2 3.3
10P5ON 7/8 - 14 1 0.50 0.94 6.0 7.2 3.3
12P5ON 11/16 - 12 11/4 0.59 1.09 6.0 7.2 3.3
14P5ON 13/16 - 12 13/8 0.59 1.09 5.5 6.6 3.3
16P5ON 15/16 - 12 11/2 0.59 1.13 5.5 6.6 3.3
20P5ON 15/8 - 12 17/8 0.59 1.20 4.0 4.8 2.6
24P5ON 17/8 - 12 21/8 0.59 1.27 3.0 3.6 1.9
32P5ON 21/2 - 12 23/4 0.59 1.44 2.0 2.4 1.3

Columbus, Ohio
HP5ON HP
Hollow Hex Plug Hex Head Pipe Plug
SAE-ORB NPTF
SAE 090109B SAE 130109E
HPD Base # 05HP HPD Base # 01CP Specs
Dynamic Assembly /
END SIZE Dynamic
Pressure END SIZE Installation
TUBE C5 X TUBE C Pressure
FITTING 1 HEX I1 L1 DIA (x 1,000 PSI) (x 1,000 PSI)
FITTING 1 HEX L
PART # UN/UNF-2A (in.) (in.) (in.) (in.) -S -SS -B PART # NPTF (in.) (in.) -S -SS -B
2HP5ON 5/16 - 24 1/8 0.30 0.40 0.44 6.0 6.0 3.3 1/8HP 1/8 - 27 7/16 0.56 6.0 7.2 3.9
3HP5ON 3/8 - 24 5/32 0.30 0.40 0.50 6.0 6.0 3.3
Reference
1/4HP 1/4 - 18 9/16 0.75 6.0 7.2 3.9 Section
4HP5ON 7/16 - 20 3/16 0.36 0.47 0.56 6.0 6.0 3.3 3/8HP 3/8 - 18 11/16 0.78 6.0 7.2 3.9
5HP5ON 1/2 - 20 7/32 0.36 0.47 0.63 6.0 6.0 3.3 1/2HP 1/2 - 14 7/8 0.97 6.0 7.2 3.9
6HP5ON 9/16 - 18 1/4 0.40 0.50 0.69 6.0 6.0 3.3 3/4HP 3/4 - 14 11/16 1.06 5.5 6.6 3.5
8HP5ON 3/4 - 16 5/16 0.44 0.58 0.88 6.0 6.0 3.3 1HP* 1 - 111/2 15/16 1.25 4.5 5.4 3.0
10HP5ON 7/8 - 14 3/8 0.50 0.65 1.00 6.0 6.0 3.3 11/4HP 11/4 - 111/2 13/4 1.41 3.0 3.6 1.9
12HP5ON 11/16 - 12 9/16 0.59 0.77 1.25 6.0 6.0 3.3 11/2HP 11/2 - 111/2 2 1.50 3.0 3.6 1.9
14HP5ON 13/16 - 12 9/16 0.59 0.77 1.38 5.5 5.5 3.3 2HP 2 - 111/2 21/2 1.69 2.0 3.0 1.3
16HP5ON 15/16 - 12 5/8 0.59 0.77 1.50 5.5 5.5 3.3
20HP5ON 15/8 - 12 3/4 0.59 0.77 1.88 4.0 4.0 2.6 * 1 HP-SS Hex is 1 3/8
24HP5ON 17/8 - 12 3/4 0.59 0.77 2.13 3.0 3.0 1.9
SHP HHP
Square Head Plug Hollow Hex Pipe Plug
NPTF NPTF
SAE 130109N
HPD Base # 01HP
Dynamic Dynamic
TUBE C TUBE C5 INTERNAL
FITTING 1 SQUARE L (x 1,000 PSI) FITTING 1 B HEX (x 1,000 PSI)
PART # NPTF (in.) (in.) -S -SS -B PART # NPTF (in.) (in.) -S -SS -B
1/8SHP-S 1/8 - 27 9/32 0.51 6.0 7.2 3.3 1/16HHP 1/16 - 27 0.30 5/32 6.0 7.2 3.3
1/4SHP-S 1/4 - 18 3/8 0.75 6.0 6.0 3.3 1/8HHP 1/8 - 27 0.30 3/16 6.0 7.2 3.9
3/8SHP-S 3/8 - 18 7/16 0.83 6.0 6.0 3.3 1/4HHP 1/4 - 18 0.46 1/4 6.0 7.2 3.9
1/2SHP-S 1/2 - 14 9/16 1.08 6.0 6.0 3.3 3/8HHP 3/8 - 18 0.46 5/16 6.0 7.2 3.3
3/4SHP-S 3/4 - 14 5/8 1.14 6.0 6.0 3.3 1/2HHP 1/2 - 14 0.61 3/8 6.0 7.2 3.3
1SHP-S 1 - 111/2 13/16 1.38 5.5 5.5 3.3 3/4HHP 3/4 - 14 0.62 9/16 5.5 6.6 3.3
1HHP 1 - 111/2 0.77 3/4 4.5 5.4 3.3
11/4HHP 11/4 - 111/2 0.77 3/4 3.0 5.0 3.3
11/2HHP 11/2 - 111/2 0.83 3/4 3.0 3.0 1.9
2HHP 2 - 111/2 0.86 3/4 2.0 2.5 1.6

Columbus, Ohio
HPC P87OMN
Hex Pipe Cap ISO 6149 Hex Head Plug
NPTF ISO 6149
(for ISO 6149-1 Port)
SAE J2244-4* 62M0109A Specs
Dynamic Dynamic
END SIZE END SIZE Pressure Assembly /
TUBE C Pressure TUBE S
(x 1,000 PSI) FITTING 1 L4 L11 HEX (x 1,000 PSI) Installation
FITTING 1 HEX L
PART # NPTF (in.) (in.) -S -SS -B PART # THREAD (mm) (mm) (mm) S SS B
1/8HPC 1/8 - 27 9/16 .75 6.0 6.0 3.3 M8P87OMN M8X1 8.5 16.2 12 9.0 9.0 3.3
1/4HPC 1/4 - 18 3/4 .91 6.0 6.0 3.3 M10P87OMN M10X1 8.5 16.2 14 8.0 8.0 3.3
M12P87OMN M12X1.5 11.0 18.5 17 9.0 9.0 3.3 Reference
3/8HPC 3/8 - 18 7/8 1.03 6.0 6.0 3.3
M14P87OMN M14X1.5 11.0 19.5 19 9.0 9.0 3.3 Section
1/2HPC 1/2 - 14 11/16 1.34 6.0 6.0 3.3
3/4HPC 3/4 - 14 11/4 1.44 4.8 4.8 3.1 M16P87OMN M16X1.5 11.5 21.5 22 9.0 9.0 3.3
1HPC 1 - 111/2 15/8 1.68 3.6 3.6 2.3 M18P87OMN M18X1.5 12.5 23.5 24 9.0 9.0 3.3
11/2HPC 11/2 - 11/2 23/8 1.92 2.4 2.4 1.5 M20P87OMN M20X1.5 12.5 24.0 27 6.0 6.0 3.3
M22P87OMN M22X1.5 13.0 25.5 27 6.0 6.0 3.3
M27P87OMN M27X2 16.0 32.0 32 6.0 6.0 3.3
M30P87OMN M30X2 16.0 32.0 36 6.0 6.0 3.3
M33P87OMN M33X2 16.0 32.0 41 6.0 6.0 3.3
M42P87OMN M42X2 16.0 34.0 50 4.0 4.0 2.6
M48P87OMN M48X2 17.5 35.5 55 2.0 2.0 1.3
M60P87OMN M60X2 17.5 33.0 65 1.0 1.0 0.6
* SAE J2244-4 and ISO 6149-4 are draft standards.
VSTI M-OR VSTI M-ED

ISO 6149 Hollow Hex Plug Metric Hollow Hex Plug
ISO 6149 Metric-ED
(for ISO 6149-1 Port) (for ISO 9974-1 / DIN 3852-1 Port)
SAE J2244-4* 62M0109B
Dynamic Dynamic
END SIZE Pressure
TUBE END SIZE Pressure TUBE
(x 1,000 PSI) FITTING 1 D L S6 (x 1,000 PSI)
FITTING 1 D L S6
PART # METRIC (mm) (mm) (mm) CF 71 MS PART # THREAD (mm) (mm) (mm) CF 71 MS
VSTI10X1ORCF M10x1 13 13.5 5 9.1 9.1 3.3 VSTI10X1ED M10x1 14 12.0 5 5.8 5.8 3.3
VSTI12X1.5ORCF M12x1.5 17 15.1 6 9.1 9.1 3.3 VSTI12X1.5ED M12x1.5 17 17.0 6 5.8 5.8 3.3
VSTI27X2ORCF M27x2 32 23.5 12 5.8 5.8 3.3 VSTI22X1.5ED M22x1.5 27 19.0 10 5.8 5.8 3.3
VSTI33X2ORCF M33x2 38 25.0 14 5.8 5.8 3.3 VSTI26X1.5ED M26x1.5 32 21.0 12 5.8 5.8 3.3
VSTI42X2ORCF M42x2 48 25.5 22 5.8 5.8 3.3 VSTI27X2ED M27x2 32 21 12 5.8 5.8 3.3
VSTI33X2ED M33x2 40 22.5 17 5.8 5.8 3.3
* SAE J2244-4 is a draft standard VSTI42X2ED M42x2 50 22.5 22 4.5 4.5 2.9
VSTI48X2ED M48x2 55 22.5 24 4.5 4.5 2.9

Columbus, Ohio
VSTI R-ED P47OMN

BSPP Hollow Hex Plug Hex Head Plug
BSPP-ED BSPP-ORB
(for ISO 1179-1 / DIN 3852-2 Port)
Specs
Dynamic
END SIZE Dynamic Assembly /
TUBE Pressure END SIZE Pressure Installation
FITTING 1 D L S6 (x 1,000 PSI) TUBE H
FITTING 1 HEX L (x 1,000 PSI)
PART # BSPP (mm) (mm) (mm) CF 71 MS
PART # BSPP (mm) (mm) S SS B
VSTI1/8ED 1/8 - 28 14 12.0 5 5.8 5.8 3.3
4P47OMNS 1/4-19 19 19.1 5.0
VSTI1/4ED 1/4 - 19 19 17.0 6 5.8 5.8 3.3 Reference
6P47OMNS 3/8-19 22 20.0 5.0
VSTI3/8ED 3/8 - 19 22 17.0 8 5.8 5.8 3.3 Section
8P47OMNS 1/2-14 27 24.1 5.0
VSTI1/2ED 1/2 - 14 27 19.0 10 5.8 5.8 3.3
12P47OMNS 3/4-14 36 26.9 4.0
VSTI3/4ED 3/4 - 14 32 21.0 12 5.8 5.8 3.3
16P47OMNS 1-11 41 31.0 3.0
VSTI1ED 1 - 11 40 22.5 17 5.8 5.8 3.3
VSTI11/4ED 1 1/4 - 11 50 22.5 22 4.5 4.5 2.9
VSTI11/2ED 11/2 - 11 55 22.5 24 4.5 4.5 2.9
HP3M
Hex Head Pipe Plug
BSPT
Dynamic
END SIZE Pressure
TUBE C
FITTING 1 HEX L (x 1,000 PSI)
PART # BSPT (mm) (mm) S SS B
1/8HP3M 1/8 - 28 10 14.2 6.0 6.0 3.3
1/4HP3M 1/4 - 19 14 19.1 6.0 6.0 3.3
3/8HP3M 3/8 - 19 17 19.8 6.0 6.0 3.3
1/2HP3M 1/2 - 14 22 24.6 6.0 6.0 3.3
3/4HP3M 3/4 - 14 27 26.9 5.5 5.5 3.3
1HP3M 1 - 11 36 31.8 4.5 4.5 2.9

Columbus, Ohio

Pipe Fittings

Uploaded by

Copyright:

Available Formats

Pipe Fittings

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Pipe Fittings

Uploaded by

Copyright:

Available Formats

Visual Index

Pipe Fittings and

F5OHAO F5OF FF FFF FF33M

F11 F11 F11 F11 F12

F12 F12 F12 F13

F13 F13 F13 F14 F14 F14

F14 F15 F15 F15 F15 F16

F16 F16 F17 F18 F19 F19

F19 F19 F19 F19

F20 F20 F20 F20 F21

F21 F22 F22 F22 F22

F2 Parker Hannifin Corporation

MRO MMO MMO444M KMMOO

F22 F23 F23 F23

F23 F24 F24 F24 F24

F25 F25 F25 F25 F26 F26

Diagnostic, Orifice and Bleed Adapters (Shown in Section M)

O-Rings and Seals (Shown in Section N)

F3 Parker Hannifin Corporation

Pipe Fittings and Port Adapters Assembly and Installation

Design and Construction NPT

NPT threads, when assembled without a sealant, leave a spiral

F4 Parker Hannifin Corporation

Application Guidelines for Tapered Threads UN / UNF Threads

All NPTF Connectors

F5 Parker Hannifin Corporation

Feature Advantage Benefit

Dimensions and pressures for reference only, subject to change.

F6 Parker Hannifin Corporation

Port Ends for SAE J1926-1 (ISO 11926-1) Port Return

SAE J1926 SAE J1926 SAE J1926-1

Dimensions and pressures for reference only, subject to change.

F7 Parker Hannifin Corporation

Port Ends for ISO 6149-1 Port Return

ISO 6149 ISO 6149 ISO 6149

Dimensions and pressures for reference only, subject to change.

F8 Parker Hannifin Corporation

NPTF and BSPT Port Ends Return

NPTF and BSPT NPTF and BSPT

Dimensions and pressures for reference only, subject to change.

F9 Parker Hannifin Corporation

Port Ends for ISO 9974-1 and 1179-1 Ports Return

ISO 9974 and 1179

ISO 9974 and 1179 Dowty Seal Stud End for

F10 Parker Hannifin Corporation

HPD Base # 0101

F11 Parker Hannifin Corporation

Dimensions and pressures for reference only, subject to change.

F12 Parker Hannifin Corporation

F13 Parker Hannifin Corporation

F14 Parker Hannifin Corporation

Dimensions and pressures for reference only, subject to change.

F15 Parker Hannifin Corporation

Dimensions and pressures for reference only, subject to change.

F16 Parker Hannifin Corporation

Dimensions and pressures for reference only, subject to change.

F17 Parker Hannifin Corporation

Dimensions and pressures for reference only, subject to change.

F18 Parker Hannifin Corporation