Paraffin MSDS: Section 1: Chemical Product and Company Identification
Paraffin MSDS: Section 1: Chemical Product and Company Identification
Paraffin MSDS: Section 1: Chemical Product and Company Identification
1 1
Fire
0 0
Re a c t iv it y 0
P e rs o n a l E
P ro t e c t io n
Potential Acute Health Effects: Slightly hazardous in case of skin contact (irritant), of eye contact (irritant), of ingestion, of
inhalation.
Potential Chronic Health Effects:
CARCINOGENIC EFFECTS: Not available. MUTAGENIC EFFECTS: Not available. TERATOGENIC EFFECTS: Not available.
DEVELOPMENTAL TOXICITY: Not available. Repeated or prolonged exposure is not known to aggravate medical condition.
Eye Contact:
Check for and remove any contact lenses. In case of contact, immediately flush eyes with plenty of water for at least 15
minutes. Get medical attention if irritation occurs.
p. 1
Skin Contact: Wash with soap and water. Cover the irritated skin with an emollient. Get medical attention if irritation develops.
Serious Skin Contact: Not available.
Inhalation:
If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical
attention.
Serious Inhalation: Not available.
Ingestion:
Do NOT induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious
person. If large quantities of this material are swallowed, call a physician immediately. Loosen tight clothing such as a collar,
tie, belt or waistband.
Serious Ingestion: Not available.
Small Spill:
Use appropriate tools to put the spilled solid in a convenient waste disposal container. Finish cleaning by spreading water on
the contaminated surface and dispose of according to local and regional authority requirements.
Large Spill:
Use a shovel to put the material into a convenient waste disposal container. Finish cleaning by spreading water on the
contaminated surface and allow to evacuate through the sanitary system. Be careful that the product is not present at a
concentration level above TLV. Check TLV on the MSDS and with local authorities.
Precautions:
Keep away from heat. Keep away from sources of ignition. Empty containers pose a fire risk, evaporate the residue under a
fume hood. Ground all equipment containing material. Do not breathe dust. Keep away from incompatibles such as oxidizing
agents.
p. 2
Storage: Keep container tightly closed. Keep container in a cool, well-ventilated area.
Engineering Controls:
Use process enclosures, local exhaust ventilation, or other engineering controls to keep airborne levels below recommended
exposure limits. If user operations generate dust, fume or mist, use ventilation to keep exposure to airborne contaminants
below the exposure limit.
Personal Protection: Safety glasses. Lab coat. Dust respirator. Be sure to use an approved/certified respirator or equivalent.
Gloves.
Personal Protection in Case of a Large Spill:
Splash goggles. Full suit. Dust respirator. Boots. Gloves. A self contained breathing apparatus should be used to avoid
inhalation of the product. Suggested protective clothing might not be sufficient; consult a specialist BEFORE handling this
product.
Exposure Limits:
Parrafin Wax (Fume) TWA: 2 STEL: 6 (mg/m3) [Canada] TWA: 2 (mg/m3) from OSHA (PEL) [United States] TWA: 2 (mg/
m3) from ACGIH (TLV) [United States] TWA: 2 (mg/m3) from NIOSH [United States] TWA: 2 STEL: 6 [United Kingdom
(UK)]Consult local authorities for acceptable exposure limits.
p. 3
Stability: The product is stable.
Instability Temperature: Not available.
Conditions of Instability: Excess heat
Incompatibility with various substances: Reactive with oxidizing agents.
Corrosivity: Non-corrosive in presence of glass.
Special Remarks on Reactivity: Not available.
Special Remarks on Corrosivity: Not available.
Polymerization: Will not occur.
Waste Disposal:
Waste must be disposed of in accordance with federal, state and local environmental control regulations.
p. 4
DOT Classification: Not a DOT controlled material (United States).
Identification: Not applicable.
Special Provisions for Transport: Not applicable.
The information above is believed to be accurate and represents the best information currently available to us. However, we
make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and we assume
no liability resulting from its use. Users should make their own investigations to determine the suitability of the information for
their particular purposes. In no event shall ScienceLab.com be liable for any claims, losses, or damages of any third party or for
lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if ScienceLab.com
has been advised of the possibility of such damages.
p. 5