Learn CBSE

You are here: Home / CBSE / Important Questions for Class 12 Economics Concept of Production Function

Important Questions for Class 12 Economics

Concept of Production Function
November 14, 2015 by Sastry CBSE

Production and CostsImportant Questions for

Class 12 Economics Concept of Production
Function
1.Production Function It studies the functional relationship between physical inputs and physical outputs. It
is expressed as Qx = F(L,K)

Where, Qx = Quantity of output, F = Function, L = Labour, K = Capital

2.Different Periods in Production

Market period It is the period during which production factors can not be changed at all. Hence, the
production function is written as Qx = F(L,K), where both labour and capital are taken as xed.
Short period It is a time period in which the producer can change only the variable factors of
production while the xed factors_of production remains constant. The production function is written
as Qx = F (L, K), where labour is taken as a variable and capital as xed factor .
Long period It is a time period when the producer has enough time to change both xed and variable
factors of production, infact all factors are variable in the long-run. The production function is written
as Qx = F (L, K) where both labour and capital are variable in nature.
3.Total Product (TP) It is the sum total of output corresponding to each unit of the variable factor used in
the process of production.

4.Marginal Product (MP) It is an additional output produced by the use of an additional unit of the variable
factor, xed factor remaining constant.

Where, ATP = Change in Total Product AL = Change in labour (variable factor)

5.Average Product (AP) It is per unit output of the variable factor.

6.Returns to a Factor It refers to the behaviour of output when only one variable factor of production is
increased xed factors remaining constant. This is a short-run phenomenon.

7.Returns to Scale It refers to change in physical output of a good on account of increase in all inputs
required to produce a good simultaneously in the same proportion. This is a long-term phenomenon.

8.Law of Variable Proportion It states that as more and more units of the variable factors are used
(alongwith the xed factor), a stage must come when Total Product of the variable factor starts declining,
after reaching its maximum points or in other word Marginal Product of variable factors initially increase,
reaches its maximum point and eventually falls to become negative.

9.Assumptions of Law of Variable Proportion

There are only two factors of production, i.e. labour and capital. Where labour is variable and capital is
xed.
State of technology remains constant.
10.Three Stages of Law of Variable Factor/Variable Proportions

Stage of increasing returns to a factor

Stage of diminishing returns to a factor
Stage of negative returns to a factor

11.Law of Diminishing Marginal Product This law states that with the increase in a variable factor, keeping
all other factors constant, the Marginal Product of the variable factor rst increases then decreases and
eventually becomes negative.

12.Point of In exion It is a point from where slope of TP curve changes. TP has been increasing at an
increasing rate, from this point onwards TP increases, but only at the diminishing rate. Also, at this point MP
is maximum.

13.Postponement of the Law of Variable Proportions

When there is improvement in technology used in the process of production. So, that greater output is
achieved with the same inputs.
When some substitute of the xed factors are discovered. So, that the constraint of xity of the factor
is removed. However, such a situation is very rare, if not impossible.

HOME RD SHARMA XII RD SHARMA XI RD SHARMA X RD SHARMA CBSE

14.Relationship between Total Product and Marginal Product

When
CBSE MP increases,
SAMPLE PAPERS TP increases at an increasing rate.
LAKHMIR SINGH
When MP reaches at its maximum, TP changes its slope termed as point.of in exion.
When MP falls but remains positive, TP increases at a diminishing rate.
When MP is zero, TP is maximum.
When MP becomes negative, TP start to fall.

15.Relationship between Marginal Product and Average Product

When AP increase, MP > AP.

When AP is maximum MP = AP.
When AP decreases, MP < AP.
MP can become zero or negative, however AP can never be zero.

Previous Years Examination Questions

1 Mark Questions
1 Mark Questions
1.Give the meaning of returns to a factor. (Delhi 2014; All India 2009)

Ans. Returns to a factor refers to the behaviour of output when only variable factor of production
isincreased in the short-run and xed factors remaining constant.

2.De ne Marginal Product. (All India 2014)

Ans. Marginal Product is the change in Total Product as a result of unit change in the input of a variable

3.De ne production function. (All India 2011,2008,2006; Delhi 2009,2007)

Ans. Production function studies the functional relationship between physical inputs and physical output.

It is expressed as Qx = F (t, K)

Where, Qx = Quantity of output

L = Labour

K = Capital

4.Give meaning of Marginal Physical Product. (All India 2007; Delhi 2006,2006C)

Ans.Marginal Physical Product refers to an additional output caused by use of an additional unit of the
variable factor, xed factor remaining constant, it is calculated as,

3 Mark Questions
5.State the relation between Marginal Revenue and Average Revenue. (Delhi 20014)

Ans.Relationship between MR and AR are:

(i) When AR is constant, MR AR.

(ii) When AR is diminishing, AR > MR.

(iii) MR can be negative, but not AR.

6.Why is Average Revenue always equal to price? (All India 2014)

Ans.Average Revenue is the per unit revenue (price) received from the sale of one unit of a commodity.

With the help of following equation we can prove AR = P.

7.Giving reasons, explain the Law of Variable Proportion. (All India 2014)

Ans. The Law of Variable Proportion shows the impact on output when units of variable factor are
increased, keeping xed factors constant in the short-run.

The law states that if more and more units of a variable factor are employed with xed factors, Total
Physical Product (TPP) increases at an increasing rate in the beginning, then increases at a diminishing rate
and nally starts falling.

Number of
Land (Acre) TPP (Quintal) APP (Quintal) MPP (Quintal)
labourers

1 0 0 0 Stage l

1 1 2 2 2

1 2 6 3 4

1 3 12 4 6
V 4 16 4 4

1 5 18 3.6 2 Stage II

1 6 18 3 0

1 7 14 2 (-) 4 Stage III

1 8 8 1 H6

As per the above schedule,

In stage I, TPP tends to rise at an increasing rate. This corresponds to the situation of increasing return to a
factor.

In stage II, TPP tends to rise at a diminishing rate. This corresponds to a situation of diminishing returns to
a factor.
In stage III, TPP starts declining. This is a situations of negative returns to a factor.

8.Complete the following data (Delhi 2013)

Units of labour Average Product (AP) (units) Marginal Product (MP) (units)
1 8

2 10

3 10

4 9

5 4

6 7

Ans.

Marginal Product (MP)

Labour t(Q) (Units) Total Product (TP) (units) Average Product (AP) (units)
(units)

1 8 8 8

2 20 10 12

3 30 10 10

4 36 9 6

5 40 8 4

6 42 7 2

AP = TP/Q, MPnth = TP TPn_v TP = AP x Q

9. Complete the following table (Delhi 2013)

Units of labour Average Product (AP) (units) Marginal Product (MP) (units)

1 16

2 20
3 20

4 18

5 8

6 14

Ans.

Marginal Product (MP)

Labour (Q) (Units) Total Product (TP) (units) Average Product (AP) (units)
(units)

1 16 16 16

7 40 20 24

7 60 20 20

4 72 18 12

5 80 16 8

6 84 14 4

10.What is meant by returns to a factor? State the la w of diminishing returns to a factor.(Delhi 2006)

Ans.Returns to a factor refers to the behaviour of output when only variable factor of production
isincreased in the short-run and xed factors remaining constant.

Law of diminishing returns to a factor This law states that with the increase in a variable factor, keeping all
other factors constant, the Marginal Product of the variable factor rst increases then falls and eventually
becomes negative.

4 Marks Questions
11.What does the Law of Variable Proportion show? State the behaviour of Marginal Product according to
this law.(All India 2012)
Ans.The Law of Variable Proportion shows the impact on output when units of variable factor are increased,
keeping xed factors constant in the short-run.

The law states that if more and more units of a variable factor are employed with xed factors, Total
Physical Product (TPP) increases at an increasing rate in the beginning, then increases at a diminishing rate
and nally starts falling.

Number of
Land (Acre) TPP (Quintal) APP (Quintal) MPP (Quintal)
labourers

1 0 0 0 Stage l

1 1 2 2 2

1 2 6 3 4

1 3 12 4 6

V 4 16 4 4

1 5 18 3.6 2 Stage II

1 6 18 3 0

1 7 14 2 (-) 4 Stage III

1 8 8 1 H6

As per the above schedule,

In stage I, TPP tends to rise at an increasing rate. This corresponds to the situation of increasing return to a
factor.

In stage II, TPP tends to rise at a diminishing rate. This corresponds to a situation of diminishing returns to
a factor.
In stage III, TPP starts declining. This is a situations of negative returns to a factor.
As per the above schedule, in stage I Marginal Product is rising but in stage II Marginal Product tends to
decline and in stage III Marginal Product becomes negative.

12.What does the Law of Variable Proportion show? State the behaviour of Total Product according to this
law. (Delhi 2012)

Ans.The Law of Variable Proportion shows the impact on output when units of a variable factor are
increased, keeping xed factors constant in the short-run

It states that as more and more units of the variable factors are used (along with the xed factor), a stage
must come when Total Product of the variable factor starts declining, and eventually starts falling.
As per the above schedule, in phase I, Total Product tends to rise at an increasing rate. This corresponds to
the situation of increasing returns to a factor. In phase II, Total Product tends to rise at a diminishing rafe
this corresponds to a situation of diminishing returns to a factor. In Phase III, Total Product starts declining,-
this is actuation of negative returns to a factor.

13.Prepare a Marginal Product schedule for increasing production when only one input isincreased.
Indicate the phases of the Law of Variable Proportion. (All India 2010)

Ans.The Law of Variable Proportion shows the impact on output when units of variable factor are
increased, keeping xed factors constant in the short-run.

The law states that if more and more units of a variable factor are employed with xed factors, Total
Physical Product (TPP) increases at an increasing rate in the beginning, then increases at a diminishing rate
and nally starts falling.

Number of
Land (Acre) TPP (Quintal) APP (Quintal) MPP (Quintal)
labourers

1 0 0 0 Stage l

1 1 2 2 2

1 2 6 3 4
1 3 12 4 6

V 4 16 4 4

1 5 18 3.6 2 Stage II

1 6 18 3 0

1 7 14 2 (-) 4 Stage III

1 8 8 1 H6

As per the above schedule,

In stage I, TPP tends to rise at an increasing rate. This corresponds to the situation of increasing return to a
factor.

In stage II, TPP tends to rise at a diminishing rate. This corresponds to a situation of diminishing returns to
a factor.
In stage III, TPP starts declining. This is a situations of negative returns to a factor.

14.Explain the likely behaviour of Total Product when only one input is increased forincreasing
production? Use diagram. (Delhi 2010c)
Ans.The Law of Variable Proportion shows the impact on output when units of variable factor are increased,
keeping xed factors constant in the short-run.

The law states that if more and more units of a variable factor are employed with xed factors, Total
Physical Product (TPP) increases at an increasing rate in the beginning, then increases at a diminishing rate
and nally starts falling.

Number of
Land (Acre) TPP (Quintal) APP (Quintal) MPP (Quintal)
labourers

1 0 0 0 Stage l

1 1 2 2 2

1 2 6 3 4

1 3 12 4 6

V 4 16 4 4

1 5 18 3.6 2 Stage II

1 6 18 3 0

1 7 14 2 (-) 4 Stage III

1 8 8 1 H6

As per the above schedule,

In stage I, TPP tends to rise at an increasing rate. This corresponds to the situation of increasing return to a
factor.

In stage II, TPP tends to rise at a diminishing rate. This corresponds to a situation of diminishing returns to
a factor.
In stage III, TPP starts declining. This is a situations of negative returns to a factor.
15.Identify different phases of the Law of Variable Proportion from the following schedule. Give reasons
for your answer. (Delhi 2006C)

Ans.

6 Marks Questions
16. State the behaviour of Marginal Product is the Law of Variable Proportions.Explain the causes of this
behaviour. (Delhi 2014)

Ans. Law of Variable Proportion states that the Marginal Product of a factor input, initially rises with its
employment level. But after reaching a certain level of employment, it starts falling.

This law may be explained with the help of following schedule and diagram:

Following observations can be made from the given table and curve:.
(i) MP rises till 3rd unit of labour are employed, in this condition TP increases at increasing rate, this
condition is called condition of increasing returns.
(ii) With the use of 4th unit of labour, MP starts decreasing and TP increases only at decreasing rate, this
condition is called condition of diminishing returns.
(iii) When decreasing MP reduces to zero, Total Product is maximum.
(iv) When Marginal Product is negative, Total Product starts declining. (l)
Law of Variable Proportion basically depends on diminishing returns to marginal factor.
Its main cause are:
(a) Fixity of theiactor. (b) Imperfect factor substitutability.
(c) Poor coordination between the factors.

17. State giving reasons whether the following statements are true or false.
(i) Average Product will increase only when Marginal Product increases. (All India 2013)
(ii) Under diminishing returns to a factor, Total Product continues to increase tillMarginal Product reaches
zero.
(All India 2011)
(iii) Where there are diminishing returns to a factor, Total Product rst increases and then starts falling.
(Delhi 2010)
(iv) When Marginal Product falls, Average Product will also fall. (Delhi 2010)
(v) Total Product always increases whether there is increasing returns or diminishing
returns to a factor. (All India 2010)
(vi) When there are diminishing returns to a factor, Total Product always decreases.(Delhi 2009)
(vii) Product will increase only when Marginal Product increases. (Delhi 2009)
(viii) Increasein Total Product always indicates that there are increasing returns to afactor. (Delhi 2009)
(ix) When there are diminishing returns to a factor, Marginal product and Total Product both fall. (Delhi
2009; All India 2009)

Ans. (i) False, AP rise even when MP falls, and AP and MP are equal at the maximun point of AP.
(ii) True, under diminishing returns to a factor, Marginal Product tends to fall which implies that Total
Product should be increasing at a diminishing rate.
(iii) False, under diminishing returns to a factor, Marginal Product tends to fall. Falling Marginal Product
implies that Total Product should be increasing at a diminishing rate.
(iv) False, Average Product can rise even when Marginal Product falls.
(v) True, in a situation of increasing returns to a factor, Marginal Product tends to rise. Accordingly, Total
Product should be increasing at an increasing rate. Under diminishing returns to a factor, Marginal Product
tends to fall which implies that Total Product should be increasing at a diminishing rate.
(vi) False, in a situation of diminishing returns to a factor, Marginal Product tends to fall which implies that
Total Product should be increasing at a diminishing rate.
(vii) False, Total Product will also increase when Marginal Product decreases. In that case, Total Product
increases at a diminishing rate.
(viii) False, it is not necessary because in the stage of diminishing returns to a factor, Total Product also
increases, but at a diminishing rate.
(ix) False, in the case of diminishing returns to a factor, only Marginal Product tends to fall. Total Product
tends to increase at a diminishing rate.

18.Explain the Law of Returns to a Factor with the help of Total Product and MarginalProduct schedule.
(Delhi 2013; All India 2010,2009)
or
Explain the Law of Variable Proportion with the help of Total Product and Marginal Product
curves. (Delhi 2010,2008; All India 2006)
or
What are the different phases in the behaviour of Total Product in the Law of Variable Proportion? Also
give reasons behind the behaviour in each case. (Delhi 2009C, 2007)

Ans.The Law of Variable Proportion shows the impact on output when units of variable factor are
increased, keeping xed factors constant in the short-run.

The law states that if more and more units of a variable factor are employed with xed factors, Total
Physical Product (TPP) increases at an increasing rate in the beginning, then increases at a diminishing rate
and nally starts falling.

Number of
Land (Acre) TPP (Quintal) APP (Quintal) MPP (Quintal)
labourers

1 0 0 0 Stage l

1 1 2 2 2

1 2 6 3 4

1 3 12 4 6

V 4 16 4 4

1 5 18 3.6 2 Stage II

1 6 18 3 0

1 7 14 2 (-) 4 Stage III

1 8 8 1 H6

As per the above schedule,

In stage I, TPP tends to rise at an increasing rate. This corresponds to the situation of increasing return to a
factor.

In stage II, TPP tends to rise at a diminishing rate. This corresponds to a situation of diminishing returns to
a factor.
In stage III, TPP starts declining. This is a situations of negative returns to a factor.

19.Identify the three phases of the Law of Variable Proportion from the following andalso give reasons
behind each phase.

Ans.
Filed Under: CBSE
Tagged With: +2 Economics, CBSE Class 12, Class 12 Economics, Economics Concept of Production Function

Search the site ...

Enter your email address:

SUBSCRIBE

RECENT POSTS
 CBSE Sample Papers for Mid Term Exam Class 9
Social Science Paper 2

CBSE Sample Papers for Mid Term Exam Class 9

Social Science Paper 1

CBSE Sample Papers for Pre-Mid Term Exam

Class 9 Social Science Paper 2

CBSE Sample Papers for Pre-Mid Term Exam

Class 9 Social Science Paper 1

CBSE Sample Papers for Final Board Exams Class

9 Communicative English Paper 10

RD Sharma Class 9 Solutions Herons Formula

Exercise 12.2

RD Sharma Class 9 Solutions Herons Formula

Exercise 12.1

CBSE Sample Papers for Final Board Exams Class

9 Communicative English Paper 9

CBSE Sample Papers for Final Board Exams Class

9 Communicative English Paper 8

RD Sharma Class 9 solutions Herons Formulae Ex

12.2 Q 14

RD SHARMA SOLUTIONS NCERT SOLUTIONS

RD Sharma Class 12 RD Sharma Class 11 CBSE Class 12 CBSE Class 11

RD Sharma Class 10 RD Sharma Class 9 CBSE Class 10 CBSE Class 9

RD Sharma Class 8 RD Sharma Class 7 CBSE Class 8 CBSE Class 7

RD Sharma Class 6 TS Grewal Accountacy CBSE Class 6 CBSE Sample Papers

 SOCIAL PROFILES

Like us on Facebook Follow us on Twitter

Watch Youtube Videos Follow us on Google Plus

LearnCBSE Forum

Copyright 2017 Magazine Pro Theme on Genesis Framework WordPress Log in