Polar Bear : Assembly Instructions Page

Canon is a registered trademark of Canon Inc. Katsuyuki Shiga(PinoArt)

A
Assemble the head
Use pattern: Page2 / Page3.
Cut out A1 by cutting along the lines.
Cut along the line marked .
Parts name Triangular glue tab
Parts No.
Glue spot

Cut a slot right

Scissors line in to the apex of
the triangular glue
tab.
Make a valley fold on A1.
Trace along the valley fold line with a pencil, scoring it to
make it easier to fold.

A1

The parts will be easier to assemble if curled.

Using the photo as a guide, apply pressure with the palm of your hand,
gradually curling the paper in the direction of the arrow.

Tools Notation Key

A1
Scissors Scissors line
Mountain fold
Paste, or woodwork glue
Valley fold
A1
Stencil pen, or bodkin Glue spot

Ruler A1, B1 Parts No.

The Assembly instructions are divided into three blocks:

A (head), B (body), C (legs). Add a slight curl to A1 when attaching it.
Follow the instructions for each block to assemble your polar Attach the triangular glue tabs so that the front side becomes convex.
bear. Using the photo as a guide, attach in the direction of the arrow.

marks a basic assembly technique that remains the same A1

regardless of the part. Instructions are printed only for the first
instance.

<Caution>
Keep scissors and glue away from small children.
Be careful not to cut your fingers when using scissors.
 Polar Bear : Assembly Instructions Page

Canon is a registered trademark of Canon Inc. Katsuyuki Shiga(PinoArt)

Assemble A2, A3 and A4. Assemble A9, and attach it to the head.

A1
A2 A2

A3
A3
A4
A9 A9

Attach the head and mouth together. Glue A10 and A11 to the neck, and the head is complete.

A1

A11 A10
A2

A10

A4

A9
Assemble A5 and A6, and attach them to the head. Put glue on the back of the part here.
A11

A6 A1
A5 A5
Assemble the body
B Use pattern: Page4 / Page5 / Page6.
Put glue on this part, and glue together. Assemble B2 and B3, and attach them to B1.

B1
A6 A5

B2

B2

Glue A7 and A8 to the throat.

B3

B1 B1

A8 A7
A1

A8
B2 B3 B2
Put glue on the back of the part here. Glue it along the line. B3
 Polar Bear : Assembly Instructions Page

Canon is a registered trademark of Canon Inc. Katsuyuki Shiga(PinoArt)

Assemble the head and body together. Assemble B7 and B8, attach them to the body, and
the body is complete.
B1 B4
B6
A9

B7

B7

B8 B5
B2

B6 B6
B7
Assemble B4 and B5.
B8
B4

B7

C
B5
Assemble the legs
Use pattern: Page7 / Page8.
Assemble B1, B2, B3, B4 and B5. Assemble C1 and C2.

B1
B4

C1
C2
B2

B5
Attach C1 and C2 to the body.

Assemble B6 to the body. C1

B4
B6
C1
C2

B2
B2

B3
 Polar Bear : Assembly Instructions Page

Canon is a registered trademark of Canon Inc. Katsuyuki Shiga(PinoArt)

Assemble C3, C4, C5 and C6.

Without adding glue, fit the feet to the legs so that they stand
on the ground. Next, attach them together with glue.

C1
C2 C6

C3 C5
C10

C8 C1 C9 C4
C7
There are no glue tabs,
C4 C6 so glue along the line. C7

C7

Attach C3 and C4 in turn to B7, and attach C5

and C6 in turn to B8.
Put glue on the back of the part here.
C4
C3

C3
B7

B7

Glue C11 and C12 to the body, and glue C13 and C14 to the front
legs. Next, glue C15 to the body, and your polar bear is complete.

C11

C6 C13
C5

Put glue on the back of the part here.

B8 Put glue on the back of the part here.

C5 B4
B2

B8

C1

Assemble C7, C8, C9 and C10. C11 C13

C7

B6

B4
C9 C15

C10 C12
C7 B3

C14 C2

C8