Toluene (En)
Toluene (En)
Toluene
Lotte Chemical Titan (M) Sdn Bhd
Product Identifier
Product name TOLUENE
1 degree toluene, 119484, 120521, 17185, 64338, BP Toluene Shell Toluene Shell Toluol Shell Methyl Benzene, Bauer Industries Thinner Exxon 12645,
Synonyms C6H5CH3, C7-H8, Cat. No. 14470, Codes: 10284-14627-15221-15295-15335-etc, ME-752, Saudi Industrial Thinner 1684, Selby Toluene, Pronalys
BSPTL786, Solvesso Toluene, Toluene, methacide, methane, phenyl-, methyl benzene, methyl benzol, methylbenzene, phenylmethane, toluol, toly tolly tollie tolie
Other means of
Not Available
identification
Relevant identified uses of the substance or mixture and uses advised against
The use of a quantity of material in an unventilated or confined space may result in increased exposure and an irritating atmosphere developing. Before starting
consider control of exposure by mechanical ventilation.
Relevant identified uses WARNING:Intentional misuse by concentrating/inhaling contents may be lethal.
Used as a solvent for paint, resins, lacquers inks adhesives. Component of solvent blends and thinners; in gasoline and aviation fuel. Used in the manufacture
of chemicals, dyes, explosives, benzoic acid. Some grades of toluene may contain traces of xylene and benzene.
Address PLO 312, Jalan Tembaga 4, Pasir Gudang Industrial Estate, 81700 Pasir Gudang, Johor, Malaysia
Website www.lottechem.my
Email css@lottechem.my
Emergency telephone
+607 253 8746
numbers
CLASS Flammable Liquid Category 2, Skin Corrosion/Irritation Category 2, Reproductive Toxicity Category 2, STOT - SE Category 3, STOT - RE Category 2, Aspiration
Classification Hazard Category 1
Label elements
CLASS label
elements
P303 + P361 + P323 IF ON SKIN (or hair): Remove/take off immediately all contaminated clothing. Rinse skin with water/shower.
P304 + P340 IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P370 + P378 In case of fire: Use alcohol resistant foam or normal protein foam for extinction.
P501 Dispose of contents/container to authorised chemical landfill or if organic to high temperature incineration
Substances
CAS No %[weight] Name CLASS Classification
Flammable Liquid Category 2, Skin Corrosion/Irritation Category 2, Reproductive Toxicity Category 2, STOT - SE
108-88-3 >98.5 toluene Category 3, STOT - RE Category 2, Aspiration Hazard Category 1; H225, H304, H315, H336, H361d, H373.
2
SECTION 4 FIRST AID MEASURES
Any material aspirated during vomiting may produce lung injury. Therefore emesis should not be induced mechanically or pharmacologically. Mechanical means should be used if it is
considered necessary to evacuate the stomach contents; these include gastric lavage after endotracheal intubation. If spontaneous vomiting has occurred after ingestion, the patient
should be monitored for difficult breathing, as adverse effects of aspiration into the lungs may be delayed up to 48 hours.
Following acute or short term repeated exposures to toluene:
Toluene is absorbed across the alveolar barrier, the blood/air mixture being 11.2/15.6 (at 37 degrees C.) The concentration of toluene, in expired breath, is of the order of 18 ppm
following sustained exposure to 100 ppm. The tissue/blood proportion is 1/3 except in adipose where the proportion is 8/10.
Metabolism by microsomal mono-oxygenation, results in the production of hippuric acid. This may be detected in the urine in amounts between 0.5 and 2.5 g/24 hr which represents, on average
0.8 gm/gm of creatinine. The biological half-life of hippuric acid is in the order of 1-2
hours. Primary threat to life from ingestion and/or inhalation is respiratory failure.
Patients should be quickly evaluated for signs of respiratory distress (eg cyanosis, tachypnoea, intercostal retraction, obtundation) and given oxygen. Patients with inadequate tidal
volumes or poor arterial blood gases (pO2 <50 mm Hg or pCO2 > 50 mm Hg) should be intubated.
Arrhythmias complicate some hydrocarbon ingestion and/or inhalation and electrocardiographic evidence of myocardial damage has been reported; intravenous lines and cardiac
monitors should be established in obviously symptomatic patients. The lungs excrete inhaled solvents, so that hyperventilation improves clearance.
A chest x-ray should be taken immediately after stabilisation of breathing and circulation to document aspiration and detect the presence of pneumothorax.
Epinephrine (adrenaline) is not recommended for treatment of bronchospasm because of potential myocardial sensitisation to catecholamines. Inhaled cardioselective bronchodilators
(e.g. Alupent, Salbutamol) are the preferred agents, with aminophylline a second choice.
Lavage is indicated in patients who require decontamination; ensure use.
These represent the determinants observed in specimens collected from a healthy worker exposed at the Exposure Standard (ES or TLV):
Determinant Index Sampling Time Comments
o-Cresol in urine 0.5 mg/L End of shift B
Hippuric acid in urine 1.6 g/g creatinine End of shift B, NS
Toluene in blood 0.05 mg/L Prior to last shift of workweek
Extinguishing media
Foam.
Dry chemical powder.
BCF (where regulations permit).
Carbon dioxide.
Fire Incompatibility Avoid contamination with oxidising agents i.e. nitrates, oxidising acids, chlorine bleaches, pool chlorine etc. as ignition may result
Alert Fire Brigade and tell them location and nature of hazard.
May be violently or explosively reactive.
Fire Fighting
Wear breathing apparatus plus protective gloves in the event of a fire.
Prevent, by any means available, spillage from entering drains or water course.
3
Liquid and vapour are highly flammable.
Severe fire hazard when exposed to heat, flame and/or oxidisers.
Fire/Explosion Hazard
Vapour may travel a considerable distance to source of ignition.
Heating may cause expansion or decomposition leading to violent rupture of containers.
Toluene:
reacts violently with strong oxidisers, bromine, bromine trifluoride, chlorine, hydrochloric acid/ sulfuric acid mixture, 1,3-dichloro-5,5-dimethyl-
2,4-imidazolidindione, dinitrogen tetraoxide, fluorine, concentrated nitric acid, nitrogen dioxide, silver chloride, sulfur dichloride, uranium fluoride, vinyl
acetate
forms explosive mixtures with strong acids, strong oxidisers, silver perchlorate, tetranitromethane
is incompatible with bis-toluenediazo oxide
attacks some plastics, rubber and coatings
may generate electrostatic charges, due to low conductivity, on flow or agitation.
Storage incompatibility
For alkyl aromatics:
The alkyl side chain of aromatic rings can undergo oxidation by several mechanisms. The most common and dominant one is the attack by oxidation at benzylic
carbon as the intermediate formed is stabilised by resonance structure of the ring.
Following reaction with oxygen and under the influence of sunlight, a hydroperoxide at the alpha-position to the aromatic ring, is the primary oxidation product
formed (provided a hydrogen atom is initially available at this position) - this product is often short-lived but may be stable dependent on the nature of the
aromatic substitution; a secondary C-H bond is more easily attacked than a primary C-H bond whilst a tertiary C-H bond is even more susceptible to attack
by oxygen
Monoalkylbenzenes may subsequently form monocarboxylic acids; alkyl naphthalenes mainly produce the corresponding naphthalene carboxylic acids.
Control parameters
INGREDIENT DATA
EMERGENCY LIMITS
4
Industrial grades of toluene
Not Available Not Available
may contain
Exposure controls
Engineering controls are used to remove a hazard or place a barrier between the worker and the hazard. Well-designed engineering controls can be highly
effective in protecting workers and will typically be independent of worker interactions to provide this high level of protection.
Appropriate engineering The basic types of engineering controls are:
controls Process controls which involve changing the way a job activity or process is done to reduce the risk.
Enclosure and/or isolation of emission source which keeps a selected hazard "physically" away from the worker and ventilation that strategically "adds" and
"removes" air in the work environment.
Personal protection
Overalls.
PVC Apron.
Other protection
PVC protective suit may be required if exposure severe.
Eyewash unit.
Appearance Clear highly flammable liquid with a strong aromatic odour; floats on water. Mixes with most organic solvents.
Partition coefficient
Odour Not Available Not Available
n-octanol / water
Auto-ignition temperature
Odour threshold Not Available 529-536
(C)
Decomposition
pH (as supplied) Not Applicable Not Available
temperature
5
Possibility of hazardous
See section 7
reactions
Hazardous decomposition
See section 5
products
Inhalation of vapours may cause drowsiness and dizziness. This may be accompanied by sleepiness, reduced alertness, loss of reflexes, lack of co-ordination,
and vertigo.
Inhaled Inhalation of vapours or aerosols (mists, fumes), generated by the material during the course of normal handling, may be damaging to the health of the
individual.
There is some evidence to suggest that the material can cause respiratory irritation in some persons.
Accidental ingestion of the material may be harmful; animal experiments indicate that ingestion of less than 150 gram may be fatal or may produce serious
damage to the health of the individual.
Ingestion Swallowing of the liquid may cause aspiration into the lungs with the risk of chemical pneumonitis; serious consequences may result. (ICSC13733)
Considered an unlikely route of entry in commercial/industrial environments. The liquid may produce gastrointestinal discomfort and may be harmful if
swallowed.
The material may cause moderate inflammation of the skin either following direct contact or after a delay of some time. Repeated exposure can cause contact
dermatitis which is characterised by redness, swelling and blistering.
Skin Contact Skin contact with the material may damage the health of the individual; systemic effects may result following absorption.
Open cuts, abraded or irritated skin should not be exposed to this material
Entry into the blood-stream, through, for example, cuts, abrasions or lesions, may produce systemic injury with harmful effects.
There is evidence that material may produce eye irritation in some persons and produce eye damage 24 hours or more after instillation. Severe inflammation
may be expected with pain.
Eye
The liquid produces a high level of eye discomfort and is capable of causing pain and severe conjunctivitis. Corneal injury may develop, with possible
permanent impairment of vision, if not promptly and adequately treated.
TOXICITY IRRITATION
Legend: 1. Value obtained from Europe ECHA Registered Substances 2.Value obtained from US-NTP
The material may cause skin irritation after prolonged or repeated exposure and may produce on contact skin redness, swelling, the production of vesicles,
TOLUENE
scaling and thickening of the skin.
For toluene:
Acute Toxicity
Humans exposed to intermediate to high levels of toluene for short periods of time experience adverse central nervous system effects ranging from
headaches to intoxication, convulsions, narcosis, and death. Similar effects are observed in short-term animal studies.
Humans - Toluene ingestion or inhalation can result in severe central nervous system depression, and in large doses, can act as a narcotic.
Serious Eye
STOT - Single Exposure
Damage/Irritation
Respiratory or Skin
STOT - Repeated Exposure
sensitisation
6
SECTION 12 ECOLOGICAL INFORMATIONS
Toxicity
For Toluene:
Bioaccumulative potential
Ingredient Bioaccumulation
Mobility in soil
Ingredient Mobility
Labels Required
Marine Pollutant NO
HAZCHEM 3YE
Packing group II
Class 3
Transport hazard class(es)
Subrisk Not Applicable
Packing group II
ICAO/IATA Class 3
ERG Code 3L
7
Special provisions Not Applicable
Special precautions for user Passenger and Cargo Packing Instructions 353
Packing group II
IMDG Class 3
Transport hazard class(es)
IMDG Subrisk Not Applicable
Limited Quantities 1L
Safety, health and environmental regulations / legislation specific for the substance or mixture
toluene(108-88-3) is found
on the following regulatory "Malaysia Permissible Exposure Limits","International Agency for Research on Cancer (IARC) - Agents Classified by the IARC Monographs"
lists
This safety data sheet is in compliance with the Occupational Safety and Health (Classification, Labelling and Safety Data Sheet of Hazardous Chemicals) Regulations 2013 (CLASS).
This information supplied has been based upon the current level of information available, for the purpose of specifying the requirements regarding environment, health and safety in conjunction with the
product. They are not to be interpreted as a warranty for specific product characteristics.
LOTTE CHEMICAL TITAN (M) SDN. BHD. make no representations or warranties and there are no conditions with respect to the accuracy, reliability, or application of the information herein, its products
or the safety or suitability thereof, or results obtained, whether expressed or implied including, without limitation, any implied warranty or merchantability or fitness for a particular purpose. Buyers and
users must determine the results to be obtained from the application of the information herein and the safety and suitability of LOTTE CHEMICAL TITAN (M) SDN. BHD. products, whether or not
occasioned by LOTTE CHEMICAL TITAN (M) SDN. BHD. negligence or based on strict product liability. LOTTE CHEMICAL TITAN (M) SDN. BHD. neither assumes nor authorizes any person to
assume for it any liability in connection with the use of the information herein or its products.