Connectors en
Connectors en
Connectors en
TRI-CLAMP FITTINGS
Clamp Elbow 45.............................................................................................................36
Clamp Elbow 90.............................................................................................................37
Clamp T-Piece, equal.......................................................................................................38
Clamp T-Piece, short Outlet..............................................................................................39
Concentric Clamp Reducer...............................................................................................40
Reduced TC-Adapter, concentric.......................................................................................41
Reduced TC-Adapter, excentric.........................................................................................42
TC-Interior Thread-Adapter...............................................................................................43
TC-External Thread-Adapter.............................................................................................44
ASEPTIC-0-RING UNIONS
Female Union................................................................................................................. 68
Union Nut....................................................................................................................... 69
Male Union..................................................................................................................... 70
O-Ring........................................................................................................................... 71
Reduced Female Union.................................................................................................... 72
Reduced Male Union....................................................................................................... 73
Female Cap.................................................................................................................... 74
Male Cap........................................................................................................................ 75
VALVES
NRV-Non Return Valve acc. ISO ........................................................................................89
NRV-Non Return Valve acc. DIN ........................................................................................90
NRV-Non Return Valve / Gasket-Kit...................................................................................91
NRV-Non Return Valve / Spring Forces..............................................................................92
Tri-Clamp Flap Valve ........................................................................................................93
Sterile-Air-Bleeder and Extraction Valve.............................................................................94
HOSE CONNECTIONS
Tri-Clamp Hose Barb....................................................................................................... 96
Tri-Clamp Hose Barb....................................................................................................... 97
CONNLOCK - MR-DN Hose Connection............................................................................ 98
CONNLOCK - MR-DN Hose Connection............................................................................ 99
CONNLOCK - MR-DN Hose Connection.......................................................................... 100
CONNLOCK - MR-DN Hose Connection.......................................................................... 101
CONNLOCK - MR-DN Hose Connection.......................................................................... 102
CONNLOCK - MR-DN Hose Connection.......................................................................... 103
CONNLOCK - MR-DN Hose Connection.......................................................................... 104
CONNLOCK - MR-DN Hose Connection.......................................................................... 105
MR-DN with aseptic Female Unions acc.DIN 11864-1, Grooved Nut DIN 11864............... 106
MR-DN with aseptic Groove Flange acc.DIN 11864-2, Orbitally welded............................ 107
MR-DN with aseptic Grooved Clamp acc.DIN 11864-3.................................................... 108
MR-DN with aseptic Lapped Clamp acc.DIN 11864-3..................................................... 109
Valid standards: ISO 2852, DIN 32676, BS 4825 (ASME BPE) / *non standard
Material: Tri-Clamp Coupling, Wingnuts and Eye-Bolt Screw from
AISI 316 (1.4401)
Permissible sterilization temperature: 150C
Version / Surface quality: Closure Clamp with V-Profile, for equal pressure over
the whole circumference. Surface, internal and external bright finish
Options: Hexagon nuts are also available as an alternative to the wingnuts
Item-No. for clamps 1/2" to 5" = 200.000.001
Item-No. for clamps from 5 1/2" = 200.000.002.
Remarks: Technical contents are subject to change
Data on the maximum operating pressure is dependent on
the seals used (elastomers).
Model with Wingnut SH Type: Torque rating 5 Nm
Model with Hexagon-Nut SHX Type: Torque rating 20 Nm
Valid standards: ISO 2852, DIN 32676, BS 4825 (ASME-BPE) / *non standard
Material: Tri-Clamp Coupling, Eye nuts and Eye-Bolt Screw from
AISI 316 (1.4401)
Permissible sterilization temperature: 150C
Version / Surface quality: Closure Clamp with V-Prole, for equal pressure over
the whole circumference. Surface, internal and external bright finish
Remarks: Technical contents are subject to change
Valid standards: ISO 2852, DIN 32676, BS 4825 (ASME-BPE) / *non standard
Material: Tri-Clamp Coupling, Wingnuts and Eye-Bolt Screw from
AISI 316 (1.4401)
Permissible sterilization temperature: 150C
Version / Surface quality: Closure Clamp with V-Prole, for equal pressure over
the whole circumference. Surface, internal and external bright finish
Options: Hexagon nuts are also available as an alternative to the wingnuts
Item-No. for clamps 1/2" to 5" = 200.000.001
Item-No. for clamps from 5 1/2" = 200.000.002
Tri-Clamp Klemmverbindungen
Remarks: Technical contents are subject to change
SH Typ (Double Bolted) Verschluss-KlammerData on the maximum operating pressure is dependent on
the seals used (elastomers).
Kapitel Tri-Clamp Klemmverbindungen Model with Wingnut SH Type: Torque rating 5 Nm
Seite 1.2 Model with Hexagon-Nut SHX Type: Torque rating 20 Nm
Valid standards: ISO 2852, DIN 32676, BS 4825 (ASME-BPE) / *non standard
Material: Tri-Clamp Coupling, Wingnuts and Eye-Bolt Screw from
SS 304 (1.4301)
Permissible sterilization temperature: 150C
Version / Surface quality: Closure Clamp with V-Prole, for equal pressure over
the whole circumference. Surface, internal and external bright finish
Remarks: Technical contents are subject to change
Data on the maximum operating pressure is dependent on
the seals used (elastomers).
Model with Wingnut S type: torque 5 Nm
Model with 6-Hexagon Nuts SX type: torque 20 Nm
Valid standards: ISO 2852, DIN 32676, BS 4825 (ASME BPE) / *non standard
Material: Tri-Clamp Coupling, Wingnuts and Eye-Bolt Screw from
SS 304 (1.4301)
Permissible sterilization temperature: 150C
Version / Surface quality: Closure Clamp with V-Prole, for equal pressure over
the whole circumference. Surface, internal and external bright finish
Remarks: Technical contents are subject to change
Valid standards: ISO 2852, DIN 32676, BS 4825 (ASME BPE) / *non standard
Material: Hexagon nut made of AISI 316 (1.4401)
Rest made of SS 304 (1.4301)
Permissible sterilization temperature: 150C
Version / Surface quality: Closure Clamp with V-Profile, for equal pressure over
the whole circumference. Surface, internal and external bright finish
Remarks: Technical contents are subject to change
Data on the maximum operating pressure is dependent on
the seals used (elastomers).
Model with Hexagon Nuts SSH type: torque 27 Nm
Valid standards: ISO 2852, DIN 32676, BS 4825 (ASME BPE) / *non standard
Material: Hexagon nut made of AISI 316 (1.4401)
Rest made of SS 304 (1.4301)
Permissible sterilization temperature: 150C
Version / Surface quality: Closure Clamp with V-Profile, for equal pressure over
the whole circumference. Surface, internal and external bright finish
Remarks: Technical contents are subject to change
Valid standards: ISO 2852, DIN 32676, BS 4825 (ASME BPE) / *non standard
Material: Tri-Clamp Coupling, Wingnuts and Eye-Bolt Screw from
AISI 316 (1.4401)
Permissible sterilization temperature: 150C
Version / Surface quality: 3 Segment-Clamp with V-prole, for equal pressure over
the whole circumference. Surface, internal and external bright finish
Remarks: Technical contents are subject to change
No data on the pressure ratings. Clamp is not in accordance with
CE-guidelines.
Valid standards: ISO 2852, DIN 32676, BS 4825 (ASME BPE) / *non standard
Material: Tri-Clamp Coupling, Eye nuts and Eye-Bolt Screw from
AISI 316 (1.4401)
Permissible sterilization temperature: 150C
Version / Surface quality: 3 Segment-Clamp with V-prole, for equal pressure over
the whole circumference. Surface, internal and external bright finish
Remarks: Technical contents are subject to change
Valid standards: ISO 2852, DIN 32676, BS 4825 (ASME BPE) / *non standard
Material: Tri-Clamp Coupling, Wingnuts and Eye-Bolt Screw from
AISI 316 (1.4401)
Permissible sterilization temperature: 150C
Version / Surface quality: Closure Clamp with V-Profile, for equal pressure over
the whole circumference. Surface, internal and external bright finish
Options: Hexagon nuts are also available as an alternative to the wingnuts
Item-No. for clamps 1/2" to 5" = 200.000.001
Item-No. for clamps from 5 1/2" = 200.000.002
Technical contents are subject to change
Remarks: Data on the maximum operating pressure is dependent on
the seals used (elastomers).
Model with Wingnut SH Type: Torque rating 5 Nm
Model with Hexagon-Nut SHX Type: Torque rating 20 Nm
Valid standards: ISO 2852, DIN 32676, BS 4825 (ASME BPE) / *non standard
Material: Tri-Clamp Coupling, Wingnuts and Eye-Bolt Screw from
AISI 316 (1.4401)
Permissible sterilization temperature: 150C
Version / Surface quality: Closure Clamp with V-Profile, for equal pressure over
the whole circumference. Surface, internal and external bright finish
Remarks: Technical contents are subject to change
ID
ID
ID
ID
A
OD *4 1/2" 130.0 114.30 109.10 21.6 220.114.109
OD *5" 144.5 127.00 120.00 21.6 220.127.120
OD 6" 167.0 152.40 146.86 21.6 220.154.147
OD *8" 217.5 205.00 198.00 21.6 220.205.198
OD *10" 268.0 254.00 250.00 28.5 220.254.250
OD *12" 319.0 304.80 300.80 28.5 220.304.300
Valid standards: acc. DIN 32676 Series B (ISO 1127) / *non standard
Material: PTFE made purely of polytetrauoride ethylene, PTFE enveloped with filler made of Viton
A
A
A
A
A
A
Valid standards: acc. DIN 32676 Series A (DIN 11850) / *non standard
Material: Viton, polymerisate made of vinylidene fluoride and hexafluoride propylenes.
Platinum catalyzed silicone, EPDM Aethylene-propylene-diene rubber, Viton
Permissible sterilization temperature: EPDM: 132C (150C for a short time), Silicone and Viton: 150C
Version / Surface quality: Surface smooth and nonporous, free of laminar recesses and ridges.
Edges without tears and notches.
Marking Marking on packing units
Certificates: Incl. Certificate of conformance FDA-21 CFR 177.2600 for Elastomers.
and USP class IV
Remarks: Technical contents are subject to change
Blind rivets also available upon request
Viton and Teflon are registered trademarks of DuPont Performance Elastomers
A
DIN 25 50.5 240.050.026 X - 241.050.026 X - 242.050.026 X -
DIN 32 50.5 240.050.032 X - 241.050.032 X - 242.050.032 X -
DIN 40 50.5 240.050.038 X - 241.050.038 X - 242.050.038 X -
DIN 50 64.0 240.064.050 X - 241.064.050 X - 242.064.050 X -
DIN 65 91.0 240.091.066 X - 241.091.066 X - 242.091.066 X -
DIN 80 106.0 240.106.081 X - 241.106.081 X - 242.106.081 X -
DIN 100 119.0 240.119.100 X - 241.119.100 X - 242.119.100 X -
DIN 125 155.0 240.155.125 X - 241.155.125 X - 242.155.125 X -
DIN 150 183.0 240.183.150 X - 241.183.150 X - 242.183.150 X -
DIN 200 233.5 240.233.200 X - 241.233.200 X - 242.233.200 X -
A
A
A
A
A
A
A
A
A
DIN 40 50.5 243.050.038 - W/L 244.050.038 - W/L
DIN 50 64.0 243.064.050 X - 244.064.050 - W/L
DIN 65 91.0 243.091.066 X - 244.091.066 - W/L
DIN 80 106.0 243.106.081 X - 244.106.081 - W/L
DIN 100 119.0 243.119.100 - W/L 244.119.100 - W/L
DIN 125 155.0 243.155.125 - W/L 244.155.125 - W/L
DIN 150 183.0 243.183.150 X - 244.182.150 - W/L
DIN 200 233.5 243.233.200 X - 244.233.200 - W/L
Valid standards: DIN 32676 Series C (ASME BPE 2009) / *non standard
Material: Viton, polymerisate made of vinylidene fluoride and hexafluoride propylenes.
Platinum catalyzed silicone, EPDM aethylene-propylene-diene-rubber
Permissible sterilization temperature: EPDM: 132C (150C for a short time), Silicone and Viton: 150C
Version / Surface quality: Surface smooth and nonporous, free of laminar recesses and ridges.
Edges without tears and notches.
Marking Marking on packing units
Certificates: Incl. Certificate of conformance FDA-21 CFR 177.2600 for elastomers
and USP Class VI
Remarks: Technical contents are subject to change
Blind gaskets also available upon request
Viton and Teflon are registered trademarks of DuPont Performance Elastomers
Valid standards: DIN 32676 Series C (ASME BPE 2009) / *non standard
Material: PTFE made purely of polytetrafluoride ethylene, PTFE with core made of fluoride-rubber FPM
A
A
A
A
A
A
Valid standards: ISO 2852, DIN 32676, BS 4825 (ASME BPE) / *non standard
Material: PTFE made purely of polytetrafluoride ethylenes, PTFE with core made of fluoride rubber FPM,
Viton, polymerisate made of vinylidene fluoride and hexafluoride propylenes.
Platinum catalyzed silicone, EPDM aethylene-propylene-diene-rubber
Permissible sterilization temperature: EPDM: 132C (150C for a short time), Silicone, Viton and PTFE: 150C
Version / Surface quality: Surface smooth and nonporous, free of laminar recesses and ridges.
Edges without tears and notches.
Marking Marking on packing units
Certificates: Incl. Certificate of conformance FDA-21 CFR 177.2600 for Elastomers.
Incl. Certificate of conformance FDA-21 CFR 177.1550 for PTFE
and USP Class VI
Remarks: Technical contents are subject to change
Viton and Teflon are registered trademarks of DuPont Performance Elastomers
Permissible sterilization temperature: Silicone: 150C, EPDM: 132C (150C for a short time),
Version / Surface quality: Surface smooth and nonporous, free of laminar recesses and ridges.
Edges without tears and notches.
Marking Marking on packing units
Certificates: Incl. Certificate of conformance FDA-21 CFR 177.2600 for Elastomers.
and USP Class VI
Remarks: Other dimensions and materials available upon request
Technical contents are subject to change
Permissible sterilization temperature: Silicone: 150C, EPDM: 132C (150C for a short time)
Version / Surface quality: Surface smooth and nonporous, free of laminar recesses and ridges.
Edges without tears and notches.
Marking: Marking on packing units
Certificates: Incl. Certificate of conformance FDA-21 CFR 177.2600 for Elastomers.
and USP Class VI
Remarks: Other materials and dimensions available upon request
The function of the gasket is only guaranteed if used with the appertaining clamp
Technical contents are subject to change
Description: Covers
Permissible sterilization temperature: Viton, Silicone: 150C, EPDM: 132C (150C for a short time),
Version / Surface quality: Surface smooth and nonporous, free of laminar recesses and ridges.
Edges without tears and notches.
Marking Marking on packing units
Certificates: Incl. Certificate of conformance FDA-21 CFR 177.2600 for Elastomers
and USP Class VI
Remarks: Other dimensions and materials made on request
Also available with bore hole
Technical contents are subject to change
Valid standards: ISO 2852, DIN 32676, BS 4825 (ASME BPE) / *non standard
Material: Stnr.-W. 1.4435 BN2 (Fe < 0.5%) acc. EN 10088
Permissible sterilization temperature: 150C
Version / Surface quality: Surfaces internal and external metallic, shiny.
Ra, internal < 0.4 m, Ra, external < 0.8 m
Pipe-Hygiene Classes: H 3 / H 4 acc. DIN 11866
Marking: Material number, melt number, manufacturer code
Certificates: Incl. Certificate of conformance EN 10204-3.1
Option: Electropolishing
Remarks: Technical contents are subject to change
Valid standards: ISO 2852, DIN 32676, BS 4825 (ASME BPE) / * non standard
Material: Stnr.-W. 1.4462 Duplex acc. EN 10088
Glass: Borosilicate acc. DIN 7080
Other ring materials (e.g 2.4602 or 2.4610) on request
Permissible operating temperatures: -30 to +280C
Permissible operating pressure: -1 to +16 bar (see table below)
Version / Surface quality: Surfaces internal and external sanded and polished.
Ra, internal < 0.25 m, Ra, external < 0.8 m
Certification: 3A-standard for food / ASME BPE 2009
Marking: Material number, melt number, certification code
Certificates: Incl. Certificate of conformance EN 10204-3.1
Remarks: Technical contents are subject to change
*DN 8 / *10 / 15 DIN 25 / 32 / 40 1" / 1 1/2" 50.5 10.0 25.0 16 bar 231.000.025
20 / 25 T
DN 32 / 40 DIN 50 2" 64.0 10.0 30.0 16 bar 231.000.050
DN 50 2 1/2" 77.5 10.0 35.0 16 bar 231.000.077
DN 65 DIN 65 3" 91.0 10.0 40.0 10 bar 231.000.065
DN 80 DIN 80 3 1/2" 106.0 10.0 50.0 10 bar 231.000.080
DIN 100 4" 119.0 12.0 55.0 10 bar 231.000.100
5" 144.5 16.0 65.0 10 bar 231.000.145
DIN 125 *5 1/2" 155.0 16.0 70.0 6 bar 231.000.155
d1
Valid standards: 45 Elbow acc. DIN 11865, TC acc. DIN 32676, ASME BPE 2009
Material: Stnr.-W. 1.4435 BN2 (Fe < 0.5%) acc. EN 10088, welding seam Fe < 1%
Permissible sterilization temperature: 150C
Version / Surface quality: Surface, internal: sanded and polished. Ra, internal < 0.6 m
Elbow surface, external bright finish. Welding seam: Annealing color removed.
Pipe-Hygiene
Tri-Clamp Classes:
Fittings H 3 acc. DIN 11866
Marking: Size, material number, melt number, manufacturer code
Bogen 45
Certificates: Certificate acc. EN 10204-3.1
Tolerances: Measurements x / y: +/- 2 mm
Option:
Kapitel Tri-Clamp Fittings Electropolishing. Further dimensions available on request.
Remarks:
Seite 1.0 Technical contents are subject to change
A
ISO DN 20 50.5 26.9 23.7 28.5 51.9 125.3 252.145.020
ID
ISO DN 25 50.5 33.7 29.7 38.0 54.7 132.0 252.145.025
ISO DN 32 64.0 42.4 38.4 47.5 57.5 138.8 252.145.032
ISO DN 40 64.0 48.3 44.3 57.0 60.2 145.4 252.145.040 MR
ISO DN 50 77.5 60.3 56.3 76.0 65.8 158.9 252.145.050
ISO DN 65 91.0 76.1 72.1 95.0 82.0 198.0 252.145.065
acc. DIN 32676 Series C, ASME BPE 2009
Y
Valid standards: 90 Elbow acc. DIN 11865, TC acc. DIN 32676, ASME BPE 2009
Material: Stnr.-W. 1.4435 BN2 (Fe < 0.5%) acc. EN 10088, welding seam Fe < 1%
Permissible sterilization temperature: 150C
Version / Surface quality: Surface, internal: sanded and polished. Ra, internal < 0.6 m
Elbow surface, external bright finish. Welding seam: Annealing color removed.
Pipe-Hygiene Classes: H 3 acc. DIN 11866
Marking: Size, material number, melt number, manufacturer code
Certificates: Certificate acc. EN 10204-3.1
Tolerances: Measurements Z: +/- 2 mm
Option: Electropolishing
Remarks: Technical contents are subject to change
Valid standards: T-Piece acc. DIN 11865, TC acc. DIN 32676, ASME BPE 2009
Material: Stnr.-W. 1.4435 BN2 acc. EN 10088, welding seam Fe < 1%
Permissible sterilization temperature: 150C
Version / Surface quality: Surface, internal: sanded and polished. Ra, internal < 0.6 m
T-Piece surface outside: bright finish. Welding seam: Annealing color removed.
Pipe-Hygiene Classes: H 3 acc. DIN 11866
Marking: Size, material number, melt number, manufacturer code
Certificates: Certificate acc. EN 10204-3.1
Tolerances: Measurements L1= +/- 2 mm
Option: Electropolishing
Remarks: Technical contents are subject to change
Valid standards: DIN 32676 Series B with pipe ends acc. ISO 1127
DIN 32676 Series C with pipe ends acc. ASME BPE 2009
Material: Stnr.-W. 1.4435 BN2 (Fe < 0.5%) acc. EN 10088
Permissible sterilization temperature: 150C
Version / Surface quality: Surface, internal and external bright finish.
Tri-Clamp
Fittings Weld-on ends for orbital-welding. Ra, internal < 0.4 m.
Pipe-Hygiene Classes: H 3 / H 4 acc. DIN 11866
Clamp Konus
Marking: Size, material number, melt number, manufacturer code
Certificates: Certificate acc. EN 10204-3.1
KapitelOption: Tri-Clamp Fittings Electropolishing. Other dimensions on request.
Seite Remarks: 5.0 Technical contents are subject to change
Dimensions
Abmessungen for Concentric
zu Clamp Konus Clamp Reducer
Sizes
Grssen A A ID ID ad ad idid LL Item No.
Artikel-Nr.
Nennweiten
acc.32676
nach DIN DIN 32676
ReiheSeries
B (ISOB 1127)
(ISO 1127)
oder/DIN
DIN32676
32676 Reihe
Series CC (ASME
(ASME BPE
BPE 2009)
2009)
ISO DN 15 / 8 50.5 18.1 13.5 10.3 35.0 257.181.135
ISO DN 15 / 8 50.5 18.1 13.5 10.3 35.0 257.181.135
ISO DN 20 / 10 50.5 23.7 17.2 14.0 35.0 257.237.172
ISO DN 20 / 10 50.5 23.7 17.2 14.0 35.0 257.237.172
ISO DN 25 / 10 50.5 29.7 21.3 18.1 35.0 257.297.213
ISO DN 25 / 10 50.5 29.7 21.3 18.1 35.0 257.297.213
BS 1-1/2" / 1" 50.5 34.8 25.4 22.1 35.0 257.344.254
BS 1-1/2" / 1" 50.5 34.8 25.4 22.1 35.0 257.344.254
ISO DN *15 / 8 64.0 18.1 13.5 10.3 35.0 257.064.135
ISO DN *15 / 8 64.0 18.1 13.5 10.3 35.0 257.064.135
ISO DN *20 / 10 64.0 23.7 17.2 14.0 35.0 257.004.172
ISO DN *20 / 10 64.0 23.7 17.2 14.0 35.0 257.004.172
Valid standards: ISO 2852 / ISO 1127 to DIN 32676 / DIN 11850, *non-standard
Material: 1) Stnr.-W. 1.4435 BN2 (Fe < 0.5%) acc. EN 10088
2) AISI 316L (1.4404)
Permissible sterilization temperature: 150C
Version / Surface quality: 1) Surface, internal and external bright finish. Ra, internal < 0.4 m
2) Surface, internal and external bright finish. Ra, internal < 0.5 m
Pipe-Hygiene Classes: H 3 / H 4 acc. DIN 11866
Tri-ClampFittings
Tri-Clamp Fittings
Marking: Size, material number, melt number, manufacturer code
Reduced
Certificates:
Reduzierte TC-Adapter
TC-Verbindung Certificate acc. EN 10204-3.1
Option: Electropolishing. Further dimensions available on request.
Remarks:
Chapter Tri-Clamp Fittings Technical contents are subject to change
Kapitel Tri-Clamp Fittings
Page 6.0
Seite 6.0
ODOD3/4"
3/4"/ 1/2"
/ 1/2" 25.0
25.0 25.0
25.0 15.8
15.8 9.49.4 40.0 255.007.005.
40.0 255.007.005.
ODOD1"1"/ 1/2"
/ 1/2" 50.5
50.5 25.0
25.0 22.1
22.1 9.49.4 40.0 255.010.005.
40.0 255.010.005.
ODOD1"1"/ 3/4"
/ 3/4" 50.5
50.5 25.0
25.0 22.1
22.1 15.8
15.8 40.0
40.0 255.010.007.
255.010.007.
ODOD1 11/2"
1/2"/ 1/2"
/ 1/2" 50.5
50.5 25.0
25.0 34.8
34.8 9.49.4 40.0 255.015.005.
40.0 255.015.005.
ODOD1 11/2"
1/2"/ 3/4"
/ 3/4" 50.5
50.5 25.0
25.0 34.8
34.8 15.8
15.8 40.0
40.0 255.015.007.
255.015.007.
ODOD1 11/2"
1/2"/ 1"
/ 1" 50.5
50.5 50.5
50.5 34.8
34.8 22.1
22.1 40.0 255.015.010.
40.0 255.015.010.
ODOD2"2"/ 1/2"
/ 1/2" 64.0
64.0 25.0
25.0 47.5
47.5 9.49.4 60.0 255.020.005.
60.0 255.020.005.
ODOD2"2"/ 3/4"
/ 3/4" 64.0
64.0 25.0
25.0 47.5
47.5 15.8
15.8 60.0 255.020.007.
60.0 255.020.007.
ODOD2"2"/ 1"
/ 1" 64.0
64.0 50.5
50.5 47.5
47.5 22.1
22.1 45.0
45.0 255.020.010.
255.020.010.
ODOD2"2"/ 1/ 11/2"
1/2" 64.0
64.0 50.5
50.5 47.5
47.5 34.8
34.8 45.0 255.020.015.
45.0 255.020.015.
ODOD2 21/2"
1/2"/ 1/2"
/ 1/2" 77.5
77.5 25.0
25.0 60.2
60.2 9.49.4 60.0
60.0 255.025.005.
255.025.005.
ODOD2 21/2"
1/2"/ 3/4"
/ 3/4" 77.5
77.5 25.0
25.0 60.2
60.2 15.8
15.8 60.0 255.025.007.
60.0 255.025.007.
ODOD2 21/2"
1/2"/ 1"
/ 1" 77.5
77.5 50.5
50.5 60.2
60.2 22.1
22.1 45.0 255.025.010.
45.0 255.025.010.
ODOD2 21/2"
1/2"/ 1/ 11/2"
1/2" 77.5
77.5 50.5
50.5 60.2
60.2 34.8
34.8 45.0 255.025.015.
45.0 255.025.015.
ODOD2 21/2"
1/2"/ 2"
/ 2" 77.5
77.5 64.0
64.0 60.2
60.2 47.5
47.5 45.0 255.025.020.
45.0 255.025.020.
OD 3"
OD 3" / 1"/ 1" 91.0
91.0 50.5
50.5 72.9
72.9 22.1
22.1 60.0 255.030.010.
60.0 255.030.010.
ODOD3"3"/ 1/ 11/2"
1/2" 91.0
91.0 50.5
50.5 72.9
72.9 34.8
34.8 60.0 255.030.015.
60.0 255.030.015.
OD 3"
OD 3" / 2" / 2" 91.0
91.0 64.0
64.0 72.9
72.9 47.5
47.5 60.0
60.0 255.030.020.
255.030.020.
ODOD3"3"/ 2/ 21/2"
1/2" 91.0
91.0 77.5
77.5 72.9
72.9 60.2
60.2 60.0 255.030.025.
60.0 255.030.025.
L
ID
A
id
a
G-Thread
IG 3 G 3/8" 12.0 50.5 15.0 30.0 24 263.030.050
ID
A
AD
ID
Dimensions for pipes acc. DIN 11866, Series C (ASME BPE 2009)
Standard Length: 6 meters
Sizes AD ID S Weight Item No. Item No.
kg / m Bright finish Electropolishing
acc. DIN 11866 Series C (ASME BPE 2009)
OD 1/8" 3.18 2.06 0.56 0.036 258.318.206.MB 258.318.206
OD 1/4" 6.35 4.37 0.89 0.124 258.063.045.MB 258.063.045
OD 3/8" 9.53 7.55 0.89 0.196 258.953.775.MB 258.953.775
OD 1/2" 12.70 9.40 1.65 0.457 258.127.094.MB 258.127.094
OD 3/4" 19.05 15.75 1.65 0.720 258.195.157.MB 258.195.157
OD 1" 25.40 22.10 1.65 0.982 258.254.221.MB 258.254.221
OD 1 1/2" 38.10 34.80 1.65 1.507 258.381.348.MB 258.381.348
OD 2" 50.80 47.50 1.65 2.033 258.508.475.MB 258.508.475
OD 2 1/2" 63.50 60.20 1.65 2.559 258.635.602.MB 258.635.602
OD 3" 76.20 72.90 1.65 3.083 258.761.719.MB 258.761.719
OD 4" 101.60 97.38 2.11 5.262 258.101.974.MB 258.101.974
OD 6" 152.40 146.86 2.77 10.390 258.152.146.MB 258.152.146
s
AD
ID
Valid standards: DIN 11865 with pipe connection acc. DIN 11866 Series B (ISO 1127)
Material: Seamless or welded austenite stainless-steel pipe
Stnr.-W. 1.4435 BN2 (Fe < 0.5%) acc. EN 10088
Permissible sterilization temperature: 150C
Version / Surface quality: Right-angled weld-on ends for orbital-welding
Bright finish: Ra, internal < 0.8 m, Ra, external < 0.8 m
Electropolishing: Ra, internal < 0.6 m, Ra, external < 0.8 m
Pipe-Hygiene Classes: H3 acc. DIN 11866
*H4 (Ra < 0.4 m), *H5 (Ra < 0.25 m) / *available on request
Tolerance: acc. ISO 5252 D4/T3 and ASTM A269 / A270
Marking: Size, material number, melt number, manufacturer code
Certificates: Certificate acc. EN 10204-3.1
Remarks: Dimensions acc. DIN 11866, Series A (DIN 11850) available on request.
Technical contents are subject to change
s
d
Valid standards: DIN 11865 with pipe connection acc.DIN 11866 Series C (ASME BPE 2009)
Material: Seamless or welded austenite stainless-steel pipe
Stnr.-W. 1.4435 BN2 (Fe < 0.5%) acc. EN 10088-1
Permissible sterilization temperature: 150C
Version / Surface quality: Right-angled weld-on ends for orbital-welding
Bright finish: Ra, internal < 0.8 m, Ra, external < 0.8 m
Electropolishing: Ra, internal < 0.6 m, Ra, external < 0.8 m
Pipe-Hygiene Classes: H3 acc. DIN 11866
*H4 (Ra < 0.4 m), *H5 (Ra < 0.25 m) / *available on request
Tolerance: acc. ISO 5252 D4/T3 and ASTM A269 / A270
Marking: Size, material number, melt number, manufacturer code
Certificates: Certificate acc. EN 10204-3.1B
Remarks: Dimensions acc. DIN 11866, Series A (DIN 11850) available on request.
Technical contents are subject to change
s
d
Valid standards: DIN 11865 with pipe connection acc. DIN 11866 Series B (ISO 1127)
Material: Seamless or welded austenite stainless-steel pipe
Stnr.-W. 1.4435 BN2 (Fe < 0.5%) acc. EN 10088-1
Permissible sterilization temperature: 150C
Version / Surface quality: Right-angled weld-on ends for orbital-welding
Bright finish: Ra, internal < 0.8 m, Ra, external < 0.8 m
Electropolishing: Ra, internal < 0.6 m, Ra, external < 0.8 m
Pipe-Hygiene Classes: H3 acc. DIN 11866
*H4 (Ra < 0.4 m), *H5 (Ra < 0.25 m) / *available on request
Tolerance: acc. ISO 5252 D4/T3 and ASTM A269 / A270
Marking: Size, material number, melt number, manufacturer code
Certificate: Certificate acc. EN 10204-3.1
Remarks: Dimensions acc. ISO 11865
Technical contents are subject to change
M
R
d
L
I
Valid standards: DIN 11865 with pipe connection acc. DIN 11866 Series C (ASME BPE 2009)
Material: Seamless or welded austenite stainless-steel pipe
Stnr.-W. 1.4435 BN2 (Fe < 0.5%) acc. EN 10088-1
Permissible sterilization temperature: 150C
Version / Surface quality: Right-angled weld-on ends for orbital-welding
Bright finish: Ra, internal < 0.8 m, Ra, external < 0.8 m
Electropolishing: Ra, internal < 0.6 m, Ra, external < 0.8 m
Pipe-Hygiene Classes: H3 acc. DIN 11866
*H4 (Ra < 0.4 m), *H5 (Ra < 0.25 m) / *available on request
Tolerance: acc. DIN EN 1127 / ISO 5252 D4/T3 and ASTM A269 / A270
Marking: Size, material number, melt number, manufacturer code
Certificates: Certificate acc. EN 10204-3.1B
Remarks: Dimensions acc. DIN 11866, Series A (DIN 11850) available on request.
Technical contents are subject to change
M
R
d
L
I
Valid standards: Pipe connection acc. DIN 11866 Series B (ISO 1127)
Material: Stnr.-W. 1.4435 BN2 (Fe < 0.5%) acc. EN 10088
Permissible sterilization temperature: 150C
Version / Surface quality: Surface, internal and external bright finish. Right angled weld-on ends for welding
Ra, internal < 0.6 m, Ra, externa < 0.8 m
Pipe-Hygiene Classes: H 3 acc. DIN 11866
Marking:
Schweiss-Fittings Material number, melt number, manufacturer code
Certificates: Certificate acc. EN 10204-3.1
Bogen 90 (aus Vollmaterial)
Option: Electropolishing. Further dimensions available on request.
Remarks: All sizes made from solid material
Kapitel Schweiss-Fittings
Technical contents are subject to change
Seite 3.2
Dimensions zu
Abmessungen forBogen
Elbow 90
90
Sizes
Grssen ADAD ID ID L L Item No.
Artikel-Nummer
Nennweiten
nach DIN
acc. 11866,
DIN 11866Reihe B (ISO
Series 1127)
B (ISO 1127)
ISOISO
DNDN 6 6 10.2
10.2 7.07.0 24.0
24.0 252.045.006
252.045.006
ISOISO
DNDN 8 8 13.5
13.5 10.3
10.3 24.0
24,0 252.045.008
252.045.008
ISOISO
DNDN 10 10 17.2 14.0 24.0 252.045.010 $
17.2 14.0 24.0 252.045.010
#"
!"
$
#"
!"
Valid standards: DIN 11865 with pipe connection acc. DIN 11866 Series B (ISO 1127)
Material: Seamless or welded austenite stainless-steel pipe
Stnr.-W. 1.4435 BN2 (Fe < 0.5%) acc. EN 10088-1, welding seam Fe < 1%
Permissible sterilization temperature: 150C
Version / Surface quality: Right-angled weld-on ends for orbital-welding
Bright finish: Ra, internal < 0.8 m, Ra, external < 0.8 m
Electropolishing: Ra, internal < 0.6 m, Ra, external < 0.8 m
Pipe-Hygiene Classes: H3 acc. DIN 11866
*H4 (Ra < 0.4 m), *H5 (Ra < 0.25 m) / *available on request
Tolerance: acc. ISO 5252 D4/T3 and ASTM A269 / A270
Marking: Size, material number, melt number, manufacturer code
Certificates: Certificate acc. EN 10204-3.1
Remarks: Dimensions acc. DIN 11866, Series A (DIN 11850) available on request.
T-pieces with short outlet also available upon request
Technical contents are subject to change
d
S2
S1
l
Valid standards: DIN 11865 with pipe connection acc. DIN 11866 Series B (ISO 1127)
Remarks: Dimensions acc. DIN 11866, Series A (DIN 11850) available on request
T-pieces with a short outlet also available upon request
Technical contents are subject to change
Dimensions forT-Piece
Valid standards: DIN 11865 with pipe connection acc. DIN 11866 Series C (ASME BPE 2009)
Material: Seamless or welded austenite stainless-steel pipe
Stnr.-W. 1.4435 BN2 (Fe < 0.5%) acc. EN 10088-1, welding seam Fe < 1%
Permissible sterilization temperature: 150C
Version / Surface quality: Right-angled weld-on ends for orbital-welding
Bright finish: Ra, internal < 0.8 m, Ra, external < 0.8 m
Electropolishing: Ra, internal < 0.6 m, Ra, external < 0.8 m
Pipe-Hygiene Classes: H3 acc. DIN 11866
*H4 (Ra < 0.4 m), *H5 (Ra < 0.25 m) / *available on request
Tolerance: acc. ISO 5252 D4/T3 and ASTM A269 / A270
Marking: Size, material number, melt number, manufacturer code
Certificates: Certificate acc. EN 10204-3.1
Remarks: Dimensions acc. DIN 11866, Series A (DIN 11850) available on request
T-Piece with short outlet available upon request
Technical contents are subject to change
d
S2
S1
l
Bezeichnung: DIN 11865 with pipe connection acc. DIN 11866 Series C (ASME BPE 2009)
Remarks: Dimensions acc. DIN 11866, Series A (DIN 11850) available on request
T-pieces with short outlet also available upon request
Technical contents are subject to change
Valid standards: Pipe connection acc. DIN 11866 Series B (ISO 1127)
Material: Stnr.-W. 1.4435 BN2 (Fe < 0.5%) acc. EN 10088
Permissible sterilization temperature: 150C
Version / Surface quality: Surface, internal and external bright finish. Right-angled weld-on ends for welding.
Ra, internal < 0.4 m, Ra, external < 0.8 m
Pipe-Hygiene Classes: H3 / H4 acc. DIN 11866
Marking: Material number, melt number, manufacturer code
Certificates: Certificate acc. EN 10204-3.1
Option: Electropolishing and further dimensions available on request.
Remarks: All sizes made from solid material
Technical contents are subject to change
AD
ID
Valid standards: Pipe connection acc. DIN 11866 Series B (ISO 1127)
Material: Stnr.-W. 1.4435 BN2 (Fe < 0.5%) acc. EN 10088
Permissible sterilization temperature: 150C
Version / Surface quality: Surface, internal and external bright finish. Right-angled weld-on ends for welding
Ra, internal < 0.4 m, Ra, external < 0.8 m
Pipe-Hygiene Classes: H3 / H4 acc. DIN 11866
Marking: Size, material number, melt number, manufacturer code
Certificates: Certificate acc. EN 10204-3.1
Option: Electropolishing and further dimensions available on request
Remarks: All sizes made from solid material
Technical contents are subject to change
AD
ID
Valid standards: DIN 11865 with pipe connection acc. DIN 11866 Series B (ISO 1127)
Material: Stnr.-W. 1.4435 BN2 (Fe < 0.5%) acc. EN 10088
Permissible sterilization temperature: 150C
Version / Surface quality: Surface, internal and external bright finish. Right-angled weld-on ends for orbital-welding
Ra, internal < 0.8 m, Ra, external < 0.8 m
Pipe-Hygiene Classes: H3 acc. DIN 11866
*H4 (Ra < 0.4 m), *H5 (Ra < 0.25 m) / *available on request
Marking: Material number, melt number, manufacturer code
Certificates: Certificate acc. EN 10204-3.1
Option: Electropolishing and further dimensions available on request
Remarks: Technical contents are subject to change
ad
DN 32 - DN 15 42.4 21.3 2.0 1.6 80.0 255.424.213.DOCK
DN 32 - DN 20/1 42.4 26.9 2.0 1.6 80.0 255.424.269.DOCK
DN 32 - DN 25/1 42.4 33.7 2.0 2.0 80.0 255.424.337.DOCK
DN 40 - DN 15 48.3 21.3 2.0 1.6 90.0 255.483.213.DOCK L
DN 40 - DN 20/1 48.3 26.9 2.0 1.6 90.0 255.483.269.DOCK
DN 40 - DN 25/1 48.3 33.7 2.0 2.0 90.0 255.483.337.DOCK
DN 40 - DN 32 48.3 42.4 2.0 2.0 90.0 255.483.424.DOCK
Valid standards: DIN 11865 with pipe connection acc. DIN 11866 Series B (ISO 1127)
Material: Stnr.-W. 1.4435 BN2 (Fe < 0.5%) acc. EN 10088
Permissible sterilization temperature: 150C
Version / Surface quality: Surface, internal and external bright finish. Right-angled weld-on ends for orbital-welding
Ra, internal < 0.8 m, Ra, external < 0.8 m
Pipe-Hygiene Classes: H3 acc. DIN 11866
*H4 (Ra < 0.4 m), *H5 (Ra < 0.25 m) / *available on request
Marking: Material number, melt number, manufacturer code
Certificates: Certificate acc. EN 10204-3.1
Option: Electropolishing and further dimensions available on request
Remarks: Technical contents are subject to change
ad
DN 65 - DN 40 76.1 48.3 2.0 2.0 110.0 255.761.483.DOCK
DN 65 - DN 50 76.1 60.3 2.0 2.0 110.0 255.761.603.DOCK
DN 80 - DN 50 88.9 60.3 2.3 2.0 110.0 255.889.603.DOCK
L
DN 80 - DN 65 88.9 76.1 2.3 2.0 110.0 255.889.761.DOCK
DN 100 - DN 65 114.3 76.1 2.3 2.3 135.0 255.114.761.DOCK
DN 100 - DN 80 114.3 88.9 2.3 2.3 135.0 255.114.889.DOCK
Valid standards: DIN 11865 with pipe connection acc.DIN 11866 Series C (ASME BPE 2009)
Material: Stnr.-W. 1.4435 BN2 (Fe < 0.5%) acc. EN 10088
Permissible sterilization temperature: 150C
Version / Surface quality: Surface, internal and external bright finish. Right-angled weld-on ends for orbital-welding
Ra, internal < 0.8 m, Ra, external < 0.8 m
Pipe-Hygiene Classes: H3 acc. DIN 11866
*H4 (Ra < 0.4 m), *H5 (Ra < 0.25 m) / *available on request
Marking: Material number, melt number, manufacturer code
Certificates: Certificate acc. EN 10204-3.1
Option: Electropolishing and further dimensions available on request
Remarks: Technical contents are subject to change
ad
Valid standards: DIN 11865 with pipe connection acc. DIN 11866 Series B (ISO 1127)
Material: Stnr.-W. 1.4435 BN2 (Fe < 0.5%) acc. EN 10088
Permissible sterilization temperature: 150C
Schweiss Fittings
Version / Surface Quality: Surface, internal and external bright finish. Right-angled weld-on ends for orbital-welding
Konus exzentrisch
Ra, internal < 0.8 m, Ra, external < 0.8 m
Pipe-Hygiene Classes: H3 acc. DIN 11866
*H4 (Ra < 0.4 m), *H5 (Ra < 0.25 m) / *available on request
apitel Schweiss Fittings
Marking: Material number, melt number, manufacturer code
eite 7.0
Certificates: Certificate acc. EN 10204-3.1
Option: Electropolishing and further dimensions available on request
Remarks: Technical contents are subject to change
bmessungen zu Konus exzentrisch
N 20/1 - DN 08 DN26.9
15 - DN 10
13.5 21.3 17.2
1.6 1.6 1.6 1.6
60.0 6.7060.0 256.269.135.DOCK
2.05 256.213.172.DOCK
DN 20/1 - DN 08 26.9 13.5 1.6 1.6 60.0 6.70 256.269.135.DOCK
N 20/1 - DN 10 26.9 17.2 1.6 1.6 60.0 4.85 256.269.172.DOCK
DN 20/1 - DN 10 26.9 17.2 1.6 1.6 60.0 4.85 256.269.172.DOCK
N 20/1 - DN 15 26.9 21.3 1.6 1.6 60.0 2.80 256.269.213.DOCK
DN 20/1 - DN 15 26.9 21.3 1.6 1.6 60.0 2.80 256.269.213.DOCK
N 25/1 - DN 15 33.7 21.3 2.0 1.6 70.0 6.20 256.337.213.DOCK
DN 25/1 - DN 15 33.7 21.3 2.0 1.6 70.0 6.20 256.337.213.DOCK
N 25/1 - DN 20/1 DN33.7 26.9
25/1 - DN 20/1 2.0 1.6
33.7 26.9 70.0 3.4070.0 256.337.269.DOCK
2.0 1.6 3.40 256.337.269.DOCK
N 32 - DN 15 DN42.4 21.3
32 - DN 15 2.0 1.6
42.4 21.3 80.0 10.5580.0 10.55
2.0 1.6 256.424.213.DOCK
256.424.213.DOCK
N 32 - DN 20/1 DN42.4 26.9
32 - DN 20/1 2.0 1.6
42.4 26.9 80.0 7.7580.0 256.424.269.DOCK
2.0 1.6 7.75 256.424.269.DOCK
N 32 - DN 25/1 DN42.4
32 - DN 25/1
33.7 42.4 33.7
2.0 2.0 2.0 2.0
80.0 4.3580.0 256.424.337.DOCK
4.35 256.424.337.DOCK
N 40 - DN 15 DN48.3
40 - DN 15
21.3 48.3 21.3
2.0 1.6 2.0 1.6
90.0 13.5090.0 13.50 256.483.213.DOCK
256.483.213.DOCK
DN 40 - DN 20/1 48.3 26.9 2.0 1.6 90.0 10.70 256.483.269.DOCK
N 40 - DN 20/1 48.3 26.9 2.0 1.6 90.0 10.70 256.483.269.DOCK
DN 40 - DN 25/1 48.3 33.7 2.0 2.0 90.0 7.30 256.483.337.DOCK
N 40 - DN 25/1 48.3 33.7 2.0 2.0 90.0 7.30 256.483.337.DOCK
DN 40 - DN 32 48.3 42.4 2.0 2.0 90.0 2.95 256.483.424.DOCK
N 40 - DN 32 48.3 42.4 2.0 2.0 90.0 2.95 256.483.424.DOCK
Valid standards: DIN 11865 with pipe connection acc. DIN 11866 Series B (ISO 1127)
Material: Stnr.-W. 1.4435 BN2 (Fe < 0.5%) acc. EN 10088
Permissible sterilization temperature: 150C
Version / Surface quality: Surface, internal and external bright finish. Right-angled weld-on ends for orbital-welding
Ra, internal < 0.8 m, Ra, external < 0.8 m
Pipe-Hygiene Classes: H3 acc. DIN 11866
*H4 (Ra < 0.4 m), *H5 (Ra < 0.25 m) / *available on request.
Schweiss Fittings
Marking: Material number, melt number, manufacturer code
Konus exzentrisch
Certificates: Certificate acc. EN 10204-3.1
Option: Electropolishing and further dimensions available on request
Remarks:
Kapitel Schweiss Fittings Technical contents are subject to change
Seite 7.1
Dimensions for Excentric Reducer
Abmessungen zu Konus exzentrisch
Sizes AD ad s1 s2 L z Item No.
Grssen AD ad s1 s2 L z Artikel-Nr.
Nennweiten
acc. DIN 11866 Series B (ISO 1127)
nach
DNDIN
50 11866 Reihe B (ISO
- DN 20/1 60.31127)
26.9 2.0 1.6 100.0 16.70 256.603.269.DOCK
DNDN
50 50
- DN 20/1
- DN 25/1 60.3
60.3 26.9
33.7 2.0
2.0 1.6
2.0 100.0
100.0 16.70
13.30 256.603.269.DOCK
256.603.337.DOCK
DNDN
50 50
- DN 25/1
- DN 32 60.3 33.7 2.0
60.3 42.4 2.0 2.0 100.0 13.30
2.0 100.0 8.95 256.603.337.DOCK
256.603.424.DOCK
DNDN
50 50
- DN 32 40
- DN 60.3
60.3 42.4
48.3 2.0
2.0 2.0
2.0 100.0
100.0 8.95
6.00 256.603.424.DOCK
256.603.483.DOCK
DNDN
50 65
- DN 40 25/1
- DN 60.3
76.1 48.3
33.7 2.0
2.0 2.0
2.0 100.0 6.00
110.0 21.20 256.603.483.DOCK
256.761.337.DOCK
DNDN
65 65
- DN 25/1
- DN 40 76.1
76.1 33.7
48.3 2.0
2.0 2.0 110.0 21.20
2.0 110.0 13.90 256.761.337.DOCK
256.761.483.DOCK
DNDN
65 65
- DN 40 50
- DN 76.1
76.1 48.3
60.3 2.0
2.0 2.0
2.0 110.0
110.0 13.90
7.90 256.761.483.DOCK
256.761.603.DOCK
DNDN
65 80
- DN 50 50
- DN 76.1 60.3 2.0
88.9 60.3 2.3 2.0
2.0 110.0 7.90
110.0 14.30 256.761.603.DOCK
256.889.603.DOCK
DNDN
80 80
- DN 50 65
- DN 88.9
88.9 60.3
76.1 2.3
2.3 2.0
2.0 110.0
110.0 14.30
6.40 256.889.603.DOCK
256.889.761.DOCK
DNDN
80 100
- DN-65
DN 65 88.9 76.1 2.3 2.0 110.0
114.3 76.1 2.3 2.0 135.0 19.106.40 256.889.761.DOCK
256.114.761.DOCK
DNDN
100100
- DN 65 80
- DN 114.3
114.3 76.1
88.9 2.3
2.3 2.0
2.3 135.0
135.0 19.10
12.70 256.114.761.DOCK
256.114.889.DOCK
DN 100 - DN 80 114.3 88.9 2.3 2.3 135.0 12.70 256.114.889.DOCK
Valid standards: DIN 11865 with pipe connection acc. DIN 11866 Series C (ASME BPE 2009)
Material: Stnr.-W. 1.4435 BN2 (Fe < 0.5%) acc. EN 10088
Permissible sterilization temperature: 150C
Version / Surface quality: Surface, internal and external bright finish. Right-angled weld-on ends for orbital-welding
Ra, internal < 0.8 m, Ra, external < 0.8 m
SchweissPipe-Hygiene Classes:
Fittings H3 acc. DIN 11866
*H4 (Ra < 0.4 m), *H5 (Ra < 0.25 m) / *available on request
Konus exzentrisch
Marking: Size, material number, melt number, manufacturer code
Certificates: Certificate acc. EN 10204-3.1
Kapitel Option: Schweiss Fittings Electropolishing and further dimensions available on request
Seite Remarks: 7.2 Technical contents are subject to change
Dimensions
Abmessungen for Excentric
zu Konus Reducer
konzentrisch
Grssen Sizes AD AD
ad ads1 s1s2 s2 L L z z Item No.
Artikel-Nr.
Nennweiten
nach DINacc. DIN 11866
11866, Reihe CSeries
(ASMEC (ASME
BPE) BPE 2009)
NW 1/2"NW 1/2" - 3/8"12.70 12.70
- 3/8" 9.53 9.53
1.65 1.65
0.89 0.8947.63
47.63 1.59
1.59 256.127.095.DOCK
256.127.095.DOCK
NW 3/4"
NW 3/4" - 3/8" - 3/8"19.05 19.05
9.53 9.53
1.65 1.65
0.89 0.8950.80
50.80 4.76
4.76 256.190.095.DOCK
256.190.095.DOCK
NW 3/4"
NW 3/4" - 1/2" - 1/2" 19.05 12.70 1.65 1.65
19.05 12.70 1.65 1.65 53.98 3.18 53.98 3.18 256.190.127.DOCK
256.190.127.DOCK
NW 1" - NW
1/2"1" - 1/2" 25.40 25.40
12.70 12.70
1.65 1.65
1.65 1.6563.50
63.50 6.35
6.35 256.254.127.DOCK
256.254.127.DOCK
NW 1" - 3/4" 25.40 19.05 1.65 1.65 53.98 3.18 256.254.190.DOCK
NW 1" - 3/4" 25.40 19.05 1.65 1.65 53.98 3.18 256.254.190.DOCK
NW 1 1/2" - 1/2" 38.10 12.70 1.65 1.65 80.00 12.70 256.381.127.DOCK
NW 1 1/2" - 1/2" 38.10 12.70 1.65 1.65 80.00 12.70 256.381.127.DOCK
NW 1 1/2" - 3/4" 38.10 19.05 1.65 1.65 76.20 9.53 256.381.190.DOCK
NW 1 1/2" - 3/4" 38.10 19.05 1.65 1.65 76.20 9.53 256.381.190.DOCK
NW 1 1/2" - 1" 38.10 25.40 1.65 1.65 63.50 6.35 256.381.254.DOCK
NW 1 1/2" - 1" 38.10 25.40 1.65 1.65 63.50 6.35 256.381.254.DOCK
NW 2" - 1" 50.80 25.40 1.65 1.65 85.73 12.70 256.508.254.DOCK
NW 2" - 1" 50.80 25.40 1.65 1.65 85.73 12.70 256.508.254.DOCK
NW 2" - 1 1/2" 50.80 38.10 1.65 1.65 63.50 6.35 256.508.381.DOCK
NW 2" - 1 1/2" 50.80 38.10 1.65 1.65 63.50 6.35 256.508.381.DOCK
NW 2 1/2" - 1" 63.50 25.40 1.65 1.65 100.00 19.05 256.635.254.DOCK
NW 2 1/2" - 1" 63.50 25.40 1.65 1.65 100.00 19.05 256.635.254.DOCK
NW 2 1/2" - 1 1/2" 63.50 38.10 1.65 1.65 85.73 12.70 256.635.381.DOCK
NW 2 1/2" - 1 1/2" 63.50 38.10 1.65 1.65 85.73 12.70 256.635.381.DOCK
NW 3" - 1 1/2" 76.20 38.10 1.65 1.65 107.95 19.05 256.762.381.DOCK
NW 3" - 1 1/2" 76.20 38.10 1.65 1.65 107.95 19.05 256.762.381.DOCK
NW 3" - 2" 76.20 50.80 1.65 1.65 85.73 12.70 256.762.508.DOCK
NW 3" - 2" 76.20 50.80 1.65 1.65 85.73 12.70 256.762.508.DOCK
NW 3" - 2 1/2" 76.20 63.50 1.65 1.65 66.68 6.35 256.762.635.DOCK
NW 3" - 2 1/2" 76.20 63.50 1.65 1.65 66.68 6.35 256.762.635.DOCK
NW 4" - 2" 101.60 50.80 2.11 1.65 130.18 25.40 256.102.508.DOCK
NW 4" - 2" 101.60 50.80 2.11 1.65 130.18 25.40 256.102.508.DOCK
NW 4" - 2 1/2" 101.60 63.50 2.11 1.65 107.95 19.05 256.102.635.DOCK
NW 4" - NW
2 1/2"
4" - 3" 101.60 101.60
63.50 76.20
2.11 1.65 1.65
107.95
2.11 98.4319.05
12.70 256.102.635.DOCK
256.102.762.DOCK
NW 4" - 3" 101.60 76.20 2.11 1.65 98.43 12.70 256.102.762.DOCK
Valid standards: Pipe connection acc. DIN 11866 Series A (DIN 11850) / Series B (ISO 1127)
Material: Stnr.-W. 1.4435 BN2 (Fe < 0.5%) acc. EN 10088, Borosilicate (DURAN Cylinder)
O-Rings: EPDM
Permissible sterilization temperature: 135C
Version / Surface quality: Surface, external, Bright finish, tarnish removed
Surface, internal, sanded and polished Ra internal < 0.4 m
Pipe-Hygiene Classes: H 3 / H 4 acc. DIN 11866
Marking: Material number, melt number, manufacturer code
Certificates: Certificate acc. EN 10204-3.1
Option: Electropolishing.
Operating temperature can be increased in special cases to
100C (medium-dependent).
Remarks: Technical contents are subject to change
Valid standards: TC - Version: DIN 32676 with pipe connection acc. DIN 11866 Series B (ISO 1127)
Other connections acc. Connectors standard or as specified.
Material: Stnr.-W. 1.4435 BN2 (Fe < 0.5%) acc. EN 10088, Borosilicate (DURAN Cylinder)
O-Rings: EPDM
Permissible sterilization temperature: 135C
Version / Surface quality: Surface, external, Bright finish, tarnish removed
Surface, internal, sanded and polished Ra internal < 0.4 m
Pipe-Hygiene Classes: H 3 / H 4 acc. DIN 11866
Marking: Material number, melt number, manufacturer code
Certificates: Certificate acc.EN 10204-3.1
Option: Electropolishing. Sanded. Operating temperature can be increased in special cases to
100C (medium-dependent).
Available in screwed form on request.
Remarks: Technical contents are subject to change
Measurements and sizes available on request. All Tri-Clamp Connections are orbitally welded.
Length of Tri-Clamp Ferrules: see Chapter 1: Tri-Clamp Connections
Inline Sight Glass with Tri-Clamp Connections:
Description: O-Ring
Marking: -
Certificates: FDA Certificate
Option: Further dimensions available on request.
Remarks: Technical contents are subject to change
Viton and Teflon are registered trademarks of DuPont Dow Elastomers
acc. DIN 11850 Item No. Item No. Item No. Item No. Item-Number
DIN 4 248.000.004.DIN 248.001.004.DIN 248.002.004.DIN 248.003.004.DIN 248.004.004.DIN
DIN 6 248.000.006.DIN 248.001.006.DIN 248.002.006.DIN 248.003.006.DIN 248.004.006.DIN
DIN 8 248.000.008.DIN 248.001.008.DIN 248.002.008.DIN 248.003.008.DIN 248.004.008.DIN
DIN 10 248.000.010.DIN 248.001.010.DIN 248.002.010.DIN 248.003.010.DIN 248.004.010.DIN
Material resistance: see chapter Tri-Clamp Connections (Page 29)
71.0
63.0
A
78.0
63.0
A
Application and construction: The in-line seal is ideally suited for applications with flowing and
highly viscous measuring media. Since it is completely integrated into
the process line, there are no disturbing turbulences, corners,
dead spaces or other obstructions in the direction of flow. The
medium can flow without hindrance and thus effects the self-cleaning
of the measuring chamber.
The diaphragm seal is manufactured from a cylindric jacket section,
into which a thin-walled diaphragm is welded in.
Assembly: The in-line seal is clamped between two clamp connections directly in the pipeline,
so that there is no need for any special measuring point connections.
Optional extras: In-line seal with clamp connection 50.5 mm available on request.
In-line seal with integrated temperature measurement available on request.
63.0
87.0
ID
L L
Abmessungen zu CONNLUX-Sight
Dimensions for CONNLUX-Schauglasleuchte
Glass Light
Bezeichnung
Model AA dd H H Item Artikel-Nr.
No.
Leuchte 12VVAC/DC,
Light 12 AC/DC,20
20WW* * 232.000.001
232.000.001
Leuchte 12VVAC/DC,
Light 12 AC/DC,50
50WW* * 232.000.002
232.000.002
Leuchte 24VVAC/DC,
Light 24 AC/DC,50
50WW* * 232.000.003
232.000.003
Leuchte 24VVAC/DC,
Light 24 AC/DC,100
100WW* * 232.000.004
232.000.004
Schauglasanschluss
Sight Glass connection 50.5
50.5 25.0 85.085.0
25.0 232.000.050
232.000.050
Schauglasanschluss
Sight Glass connection 64.0
64.0 30.0 85.085.0
30.0 232.000.064
232.000.064
20 W
Schauglasanschluss
Sight Glass connection 91.0
91.0 40.0 85.085.0
40.0 232.000.091
232.000.091 12 V
*Nicht
*Not geeignet frcontinuous
suitable for Dauerbetrieb (nur mit(only
operation Timer)
with timer).
d
A
Valid standards: TC acc. ISO 2852 with pipe connection acc. ISO 1127
Material: Casing: Stnr.-W.: 1.4435 BN2 (Fe < 0,5%) acc. EN 10088
Springmaterial and Spider: 1.4435 / Bearing bush: 1.4435 BN2 with PTFE
Seals: EPDM as standard
Working temperature: max. 80 C
Permissible sterilization temperature: 150 C
Opening pressure: see additional datasheet for NRV-Spring Specification
Working Overpressure: max 10 bar g
Version / Surface quality: Surfaces, internal: Bright finish. Surfaces, exterior: Bright finish
Ra, internal < 0,4 m
Pipe-Hygiene Classes: H 3 / H 4 acc. DIN 11866
Marking: Size, material number, manufacturer code, flow-direction
Certificates: Certificate acc. EN 10204-3.1
Option: Electro-polishing. Upon request: Material certificates and test logs
NRV-Non Return Valves in inch dimensions: available on request
Remarks: Technical contents are subject to change
Marking: -
Certificates: FDA-Conformity
Option: -
Remarks: Technical contents are subject to change
The Gasket-Kit can be exchanged for payment
Viton and Teflon are registered trademarks of DuPont Dow Elastomers
Sizes Spring Spring Spring Spring Spring Spring Spring Spring Spring Spring Spring Spring
0.3 kg 0.4 kg 0.7 kg 1 kg 1.5 kg 2 kg 2.5 kg 3.0 kg 3.5 kg 4.0 kg 6.0 kg 8.0 kg
Opening-Pressure in bar g in reference to DN
NRV DN 8, 1/2" 0.17 0.16 0.29 0.41 0.61 0.82 1.02 1.22 1.43 1.63 2.45 3.26
NRV DN 10, 3/4" 0.17 0.16 0.29 0.41 0.61 0.82 1.02 1.22 1.43 1.63 2.45 3.26
NRV DN 15, 1" 0.09 0.10 0.17 0.24 0.36 0.48 0.60 0.72 0.84 0.97 1.45 1.93
NRV DN 20, 1" 0.09 0.10 0.17 0.24 0.36 0.48 0.60 0.72 0.84 0.97 1.45 1.93
NRV DN 25, 1 1/2" 0.03 0.04 0.07 0.10 0.15 0.20 0.25 0.30 0.35 0.40 0.60 0.79
NRV DN 32, 2" 0.02 0.02 0.04 0.05 0.08 0.11 0.14 0.16 0.19 0.22 0.33 0.44
NRV DN 40, 2" 0.02 0.02 0.04 0.05 0.08 0.11 0.14 0.16 0.19 0.22 0.33 0.44
NRV DN 50, 2 1/2" 0.01 0.01 0.02 0.03 0.05 0.07 0.09 0.10 0.12 0.14 0.21 0.28
NRV DN 65, 3" 0.01 0.01 0.02 0.02 0.03 0.05 0.06 0.07 0.08 0.09 0.14 0.19
A
I
C
Version / Surface quality: Surface, internal: Ra < 0.8 m, Surface, external bright finish
Pipe-Hygiene Classes: H 3 acc. DIN 11866
Marking: Marking with manufacturer name and melt number
Certificates: Certificate acc. EN 10204-3.1, FDA-Certificate for Seals
Option: On request: internal surface with Ra < 0.4 m
Available with safety lock on request
Remarks: Technical contents are subject to change
Viton and Teflon are registered trademarks of DuPont Dow Elastomers
ID
Type G AD ID L Item No.
AD
A
With Thread-Connection
E-V DN 6 R 1/8 R 1/8 6.0 3.0 35.0 269.010.006.G
E-V DN 8 R 1/4 R 1/4 8.0 4.0 42.0 269.015.008.G L
ID
L
ID
AD
S
Valid Norms: Pipe connection according DIN 11866 Row B (ISO 1127) / *non standard
Valid standards: Pipe connection acc. DIN 11866 Series A (DIN 11850) / *non standard
Material:
Material: Hose
Hose Barb:
Barb: Stainless
Stnr.-W. 1.4435 steelBN2
1.4435
(Fe < BN2
0.5%)(Feacc.
< 0,5%) acc. EN 10088
EN 10088
Union Nut: Stainless steel 1.4301, Collet:
Union Nut: Stnr.-W. 1.4301, Collet: autoclavable PVDF autoclavable PVDF
Sterelizing temperature:
Permissible sterilization temperature: 150C 150C
Type /ofSurface
Version construction
quality:/ Surface quality: Surface
Surface, insidebright
internal: and outside:
finish Rabright
< 0.4finish
m Ra < 0,4 m .
(ID 9.5 mm = Ra, internal < 0.6 m, IDID
(ID 9.5mm = Ra inside < 0,6 m, 6.06.0mm
mm = =Ra,Rainternal
inside << 0.8
0,8 m)
m)
Surface outside: bright
Surface external bright finish finish
Pipe-Hygienic
Pipe-Hygiene Classes:
Classes: H 3H/ 3H /4Hacc.
4 acc.
DIN DIN 11866
11866
Marking:
Marking: Size,
Size, Material,
material Batch-Number,
number, melt number,Producer
manufacturer code
Certificates:
Certificates: Certificate acc.acc.
Certificate EN EN
10204-3.1
10204-3.1
Option: Electropolishing.
Option: Electropolishing.
Remarks:
Remarks: Technical
Technicalcontents are subject
contents are subjectto change
to change
Product
Product group:
group: Hose
Hose Connections
Connections
Title:
Description: CONNLOCK
CONNLOCK - MR-DN
- MR-DN HoseHose Connection
Connection
Valid standards:
Valid Norms: PipePipe
connection
connectionacc.according
DIN 11866DIN Series C (ASME
11866 Row BBPE(ISO2009)
1127)/ *non
/ *nonstandard
standard
Material:
Material: Hose Barb: Stnr.-W. 1.4435 BN2 (Fe < 0.5%) acc. EN 10088
Hose Barb: Stainless steel 1.4435 BN2 (Fe < 0,5%) acc. EN 10088
Union Nut:Nut:
Union Stnr.-W. 1.4301,
Stainless steelCollet:
1.4301,autoclavable PVDF
Collet: autoclavable PVDF
Permissible sterilization
Sterelizing temperature:temperature: 150C 150C
Version
Type /ofSurface quality:/ Surface quality:
construction Surface,
Surfaceinternal:
insidebright finish Rabright
and outside: < 0.4finish
m Ra < 0,4 m .
(ID 9.5 mm = Ra, internal < 0.6 m, ID 6.0 mm = Ra, internal < 0.8 m)
(ID 9.5mm = Ra inside < 0,6 m, ID 6.0mm = Ra inside < 0,8 m)
Surface external bright finish
Surface outside: bright finish
Pipe-Hygiene Classes: H 3 / H 4 acc. DIN 11866
Pipe-Hygienic Classes: H 3 / H 4 acc. DIN 11866
Marking: Size, material number, melt number, manufacturer code
Marking: Size, Material, Batch-Number, Producer
Certificates: Certificate acc. EN 10204-3.1
Certificates: Certificate acc. EN 10204-3.1
Option: Electropolishing
Option:
Remarks: Electropolishing.
Technical contents are subject to change
Remarks: Technical contents are subject to change
Dimensions forfor
Dimensions CONNLOCK
CONNLOCK- -MRDN
MRDNHose
Hose Connection
Connection
withwith
weld-on endsends
butt-weld
TypeType AA BB CC AD
AD ID
ID LL Item-Number
Item No.
min./max.
min./max.
nach DIN 11866 Reihe B (ISO 1127)
acc. DIN 11866 Series C (ASME BPE 2009)
MR-DN ISO *6 26.0 12.2 - 13.2 6.4 10.2 7.0 45.0 261.100.006.ISO
MR-DN 1/4" 28.0 12.2 - 13.2 6.4 6.35 4.57 45.0 261.100.006
MR-DN ISO 8 30.0 15.0 - 17.0 9.5 13.5 10.3 61.0 261.100.008.375
MR-DN
MR-DN 3/8"
ISO 8 30.0
36.0 15.0 - 17.0
16.4 - 18.0 9.5
9.5 9.53
13.5 7.75
10.3 60.0
61.0 261.100.009
261.100.008
MR-DN
MR-DN 1/2"
ISO 8 36.0
36.0 19.5 - 21.8
19.5 - 21.8 12.7
12.7 12.70
13.5 9.40
10.3 60.0
60.0 261.100.012
261.100.008.500
MR-DN
MR-DN 3/4"
ISO 10 48.0
36.0 27.2 - 30.0
19.5 - 21.8 19.1
12.7 19.10
17.2 15.80
14.0 64.0
60.0 261.100.019
261.100.010
MR-DN
MR-DN ISO 15
1" 48.0 33.2
54.0 27.2 - 30.0
- 37.0 19.1
25.4 21.3
25.40 18.1
22.10 64.0
64.0 261.100.015
261.100.026
MR-DN
MR-DN 1ISO 20
1/2" 54.0 46.0
70.0 33.2 - 37.0
- 51.1 25.4
38.1 26.9
38.10 23.7
34.80 64.0
65.0 261.100.020
261.100.038
MR-DN ISO 25 63.0 39.5 - 42.0 31.8 33.7 29.7 68.0 261.100.025
MR-DN 2" 88.0 59.0 - 63.8 50.8 50.80 47.50 95.0 261.100.051
MR-DN ISO 32 70.0 46.0 - 51.1 38.1 42.4 38.4 68.0 261.100.032
MR-DN 2 1/2" 116.0 71.0 - 74.5 63.5 63.50 60.30 100.0 261.100.063
MR-DN ISO 40 88.0 59.0 - 63.8 50.8 48.3 44.3 95.0 261.100.040
MR-DN
MR-DN 3"
ISO 50 140.0
116.0 85.0 - 88.3
71.0 - 74.5 76.2
63.5 76.20
60.3 72.90
56.3 120.0
100.0 261.100.762
261.100.050
MR-DN ISO 65 140.0 85.0 - 88.3 76.2 76.1 72.1 120.0 261.100.076
Valid standards: TC acc. DIN 32676 Series B (ISO 1127) / *non standard
Material: Hose Barb: Stnr.-W. 1.4435 BN2 (Fe < 0.5%) acc. EN 10088
Union Nut: Stnr.-W. 1.4301, Collet: autoclavable PVDF
Permissible sterilization temperature: 150C
Version / Surface quality: Surface, internal: bright finish Ra < 0.4 m
(ID 9.5 mm = Ra, internal < 0.6 m, ID 6.0 mm = Ra, internal < 0.8 m)
Surface external bright finish
Pipe-Hygiene Classes: H 3 / H 4 acc. DIN 11866
Marking: Size, material number, melt number, manufacturer code
Certificates: Certificate acc. EN 10204-3.1
Option: Electropolishing
Remarks: Technical contents are subject to change
A
I
A
I
A
I
Valid standards: DIN 11864-1 with pipe connection acc. DIN 11866, Series B
ISO 1127
Material: Nipple: Stnr.-W.. 1.4435 BN2 (Fe < 0.5%) acc. EN 10088-1
welding seam Fe < 1%
Knurled and grooved nut: control no. -W. 1.4301
Collet: PVDF, autoclavable
Version / Surface quality: Surfaces, internal: bright finish Ra < 0.4 m
Surfaces, external bright finish
Marking: Size, material number, melt number, manufacturer code
Certificates: Certificate acc. EN 10204-3.1
Option: Electropolishing
Remarks: Technical contents are subject to change
Pressure / Temperature-ratings may be limited by the end connections.
Dimensions for MR-DN with aseptic Female Unions acc. DIN 11864-1 and Grooved Nut DIN 11851
Valid standards: DIN 11864-2 with pipe connection acc. DIN 11866, Series B
ISO 1127
Material: Nipple and flange: Stnr.-W.. 1.4435 BN2 (Fe < 0.5%) acc. EN 10088-1
welding seam Fe < 1%
Knurled nut: control number W. 1.4301, collet: PVDF, autoclavable
Version / Surface quality: Surfaces, internal: bright finish Ra < 0.4 m
Surfaces, external bright finish
Marking: Size, material number, melt number, manufacturer code
Certificates: Certificate acc. EN 10204-3.1
Option: Electropolishing
Remarks: Technical contents are subject to change
Pressure / Temperature ratings may be limited by the end connections.
MR-DN with asceptic collared flange acc. DIN 11864-2 on request
Dimensions for MR-DN with aseptic Grooved Flange acc. DIN 11864-2
Orbitally welded
Valid standards: DIN 11864-3 with pipe connection acc. DIN 11866, Series B
ISO 1127
Material: Nipple: control no. Stnr -W. 1.4435 BN2 (Fe < 0.5%) acc. EN 10088-1
welding seam Fe < 1%
Knurled nut: control no. -W. 1.4301, collet: PVDF, autoclavable
Version / Surface quality: Surfaces, internal: bright finish Ra < 0.4 m
Surfaces, external bright finish
Marking: Size, material number, melt number, manufacturer code
Certificates: Certificate acc. EN 10204-3.1
Option: Electropolishing
Remarks: Technical contents are subject to change
Pressure /Temperature ratings may be limited by the end connections
Dimensions for MR-DN with aseptic Grooved Clamp support acc. DIN 11864-3
Valid standards: DIN 11864-3 with pipe connection acc. DIN 11866, Series B
ISO 1127
Material: Nipple: control no. Stnr -W. 1.4435 BN2 (Fe < 0.5%) acc. EN 10088-1
welding seam Fe < 1%
Knurled nut: control no. -W. 1.4301, collet: PVDF, autoclavable
Version / Surface quality: Surfaces, internal: bright finish, shiny Ra < 0.4 m .
Surfaces, external bright finish
Marking: Size, material number, melt number, manufacturer code
Certificates: Certificate acc. EN 10204-3.1
Option: Electropolishing
Remarks: Technical contents are subject to change
Pressure /Temperature ratings may be limited by the end connections
Dimensions for MR-DN with aseptic Lapped Clamp support acc. DIN 11864-3
Description:
Produktegruppe: Schluche Silicone Hose, Type Connectors STHT-C
Platinum cured silicone hose
Bezeichnung: Silikon Schlauch, Typ Connectors STHT-C
Characteristics: Ultra-flexible
Platinum cured silicone hose
Autoclavable
Charakteristiken: ultra-flexibel Hardness: 45 55 Shore A
autoklavierbar Ultrapure bio-pharmaceutical grade
Taste- and odorless
Ultrapure bio-pharmaceutical grade
geschmack- und Unsurpassed
geruchlos surface quality
Unbertroffene Available in coils of: 7.62 m / 15.24 m / 30.48 m
Oberflchengte
Further
Verfgbar in Rollen von:units
7.62available
m / 15.24on m
request
/ 30.48(e.g.
m on reel)
forauf
weitere Einheiten pressure-free and low(z.B.
Anfrage erhltlich pressure applications
auf Spule)
fr drucklose bzw. druckarme Anwendungen
Temperature range: -62C to max. 232C
Temperaturbestndigkeit: -62C bis max. 232C
Applications: Pharmaceutical processes
Biotechnology
Anwendungen: Pharmazeutische Prozesse
Biotechnologie Food industry
Cell culture
Lebensmittelindustrie
Zellkultur
Certificates: FDA 21 CFR 177.2600
Zertifikate: USDA certied suitable for food
FDA 21 CFR 177.2600
USP Class VI
USDA lebensmitteltauglich
USP Class VI 3A Standard
3A Standard EP 3.1.9
EP 3.1.9 ISO 10993
ISO 10993
Connections: On request, can be produced with:
Anschlsse: vulcanized non-metallic
Auf Wunsch konfektionierbar mit: fittings
aufvulkanisierte nichtmetallische Fittings
Platinum cured silicone hose, Type Connectors STHT-C
Platin katalysierter Silikonschlauch, Typ Connectors STHT-C
The Connectors STHT-C platinum cured silicone hose exhibits very good temperature behavior. Other properties of the Connectors STHT-C hose
Der Connectors STHT-C platinum cured Silikon-Schlauch weist ein sehr gutes Temperaturverhalten auf. Weitere Eigenschaften
are its perfect flexibility and good chemical stability. The hose is naturally colored and flexible. The Connectors STHT-C hose is suitable only for
des Connectors STHT-C Silikon-Schlauches sind seine einwandfreie Flexibilitt und die gute chemische Bestndigkeit. Der Schlauch
istpressure freeundorelastisch
naturfarben low pressure applications.
(45 - 55 Shore). Der Connectors STHT-C ist nur fr drucklose bzw. druckarme Anwendungen geeignet.
Dimensions for Connectors STHT-C Hose Dimensions for Connectors STHT-C Hose
(Platinum Cured Silicone Hose) (Platinum Cured Silicone Hose)
Hose Type Connectors ID AD Hose Type Connectors ID AD
Item No. Item No.
Connectors STHT-C 012-0 601.000.012 0.30 0.61 Connectors STHT-C 500-2 601.000.500.-2 12.70 15.90
Connectors STHT-C 030-0 601.000.030 0.75 1.70 Connectors STHT-C 500-3 601.000.500.-3 12.70 17.40
Connectors STHT-C 040-0 601.000.040 1.00 2.20 Connectors STHT-C 500-4 601.000.500.-4 12.70 19.10
Connectors STHT-C 058-0 601.000.058 1.50 1.90 Connectors STHT-C 500-5 601.000.500.-5 12.70 22.20
Connectors STHT-C 062-0 601.000.062 1.60 2.40 Connectors STHT-C 625-2 601.000.625.-2 15.90 19.10
Connectors STHT-C 062-2 601.000.062.-2 1.60 4.70 Connectors STHT-C 625-3 601.000.625.-3 15.90 20.60
Connectors STHT-C 062-3 601.000.062.-3 1.60 6.40 Connectors STHT-C 625-4 601.000.625.-4 15.90 22.20
Connectors STHT-C 078-0 601.000.078 1.98 3.20 Connectors STHT-C 750-2 601.000.750.-2 19.10 22.20
Connectors STHT-C 078-2 601.000.078.-2 1.98 5.20 Connectors STHT-C 750-3 601.000.750.-3 19.10 23.80
Connectors STHT-C 078-3 601.000.078.-3 1.98 6.70 Connectors STHT-C 750-4 601.000.750.-4 19.10 25.40
Connectors STHT-C 093-2 601.000.093.-2 2.36 5.50 Connectors STHT-C 750-5 601.000.750.-5 19.10 28.60
Connectors STHT-C 093-3 601.000.093.-3 2.36 7.10 Connectors STHT-C 875-2 601.000.875.-2 22.20 25.40
Connectors STHT-C 125-2 601.000.125.-2 3.17 6.40 Connectors STHT-C 875-3 601.000.875.-3 22.20 27.00
Connectors STHT-C 125-3 601.000.125.-3 3.17 7.90 Connectors STHT-C 875-4 601.000.875.-4 22.20 28.60
Connectors STHT-C 125-4 601.000.125.-4 3.17 9.50 Connectors STHT-C 1000-2 601.001.000.-2 25.40 28.60
Connectors STHT-C 156-2 601.000.156.-2 3.96 7.10 Connectors STHT-C 1000-3 601.001.000.-3 25.40 30.10
Connectors STHT-C 156-3 601.000.156.-3 3.96 8.70 Connectors STHT-C 1000-4 601.001.000.-4 25.40 31.80
Connectors STHT-C 156-4 601.000.156.-4 3.96 10.30 Connectors STHT-C 1000-5 601.001.000.-5 25.40 34.90
Connectors STHT-C 187-2 601.000.187.-2 4.75 7.90 Connectors STHT-C 1000-6 601.001.000.-6 25.40 38.10
Connectors STHT-C 187-3 601.000.187.-3 4.75 9.50 More dimensions
Connectors STHT-C 187-4 601.000.187.-4 4.75 11.10 Please consult us for other dimensions.
Connectors STHT-C 250-2 601.000.250.-2 6.35 9.50
Connectors STHT-C 250-3 601.000.250.-3 6.35 11.10
Connectors STHT-C 250-4 601.000.250.-4 6.35 12.70
Connectors STHT-C 312-2 601.000.312.-2 7.90 11.10
Connectors STHT-C 312-3 601.000.312.-3 7.90 12.70
Connectors STHT-C 312-4 601.000.312.-4 7.90 14.30
Connectors STHT-C 375-2 601.000.375.-2 9.50 12.70
Connectors STHT-C 375-3 601.000.375.-3 9.50 14.30
Connectors STHT-C 375-4 601.000.375.-4 9.50 15.90
Connectors STHT-C 375-5 601.000.375.-5 9.50 19.10
ConnectorsSTHT-R
Connectors STHT-RGewebeverstrkter
Fabric reinforced Silicone Hose
Silikonschlauch
Connectors
Connectors material reinforced
gewebeverstrkter STHT-R
STHT-R exhibits
weist ein veryTemperaturverhalten
sehr gutes good temperature auf.
behaviour. Thewird
Der Inliner inliner is made exclusively
ausschliesslich from platinum catalyzed
aus platinkataysiertem
Silikon hergestellt.
silicone. ContinuousDie kontinuierliche
extrusion of Extrusion desallows
the inliner Inlinersa gewhrleistet eine surface
smooth internal glatte Innenoberflche
and the mostund die optimalsten
optimum cleaningReinigungs- und
and sterilization results.
Sterilisierergebnisse. Die Gewebeverstrkung
The material reinforcement was developedwurde
forfrincreased
erhhte Systemdrcke entwickelt.
system pressures. Other properties of the connector STHT-R silicone hose
Weitere Eigenschaften des Connectors STHT-R Silikon-Schlauches sind seine einwandfreie Flexibilitt und die gute chemische Bestndigkeit.
are ist flawless exibility and good chemical resistance.
Fabric-Reinforced
Gewebeverstrkt frfor pressure applications.
Druckanwendungen
Technical characteristics:
Burst pressure in relation to the temperature: The bursting pressure of the Connector STHT-R hose is reduced by around 20%
per temperature increase of 93C until the maximum hose temperature is reached.
The reduction is linear.
Productgroup:
Product group: Hoses Hoses
Description:
Title: SiliconeSilicone Hose,
Hose, Type Type Connectors
Connectors STHT-RSTHT-R
Braid-Reinforced Silicone Hose Hose
Fabric reinforced Silicone
Technical caracteristics:
Technical characteristics:
Marking: All hoses are marked according to CVAG_APN_0001.0 with the following:
Marking: All hoses Supplier
are marked according (CVAG_APN_0001.0) on the outer surface with:
(acc. CVAG_APN_0001.0)
Hose type and size
Supplier
Lot No
Hose type and size
Norms
Lot No
Production date
Norms
Production date
Physical Properties: According CVAG_FGS_0001.0
Physical Properties: According CVAG_FGS_0001.0
Sterilization Methods:
Sterilization Methods:
Autoclavable
Autoclavable
Gas - Ethylene
Gas - Ethylene Oxide Oxide
Radiation
Radiation - upMrad
- up to 2.5 to 2.5
( 25Mrad (25 Kilogray)
Kilogray)
Inline sterilisable (steam) (steam)
Inline sterilizable
Perfect connections: CONNLOCK the suitable hose coupling for the Connectors STHT-T and STHT-W Hoses
CONNLOCK is an absolutely high-quality, re-usable quick coupling connector, which is developed for the highest demands of the pharmaceutical and biochemical
industry. CONNLOCK is available in dimesions from DN6 to DN65 as '' Buttend-Weld'' version, with Tri-Clamp Ends or customized connections. The quick coupling is
made from the material 1.4435 Bn2 and the collet from autoclavable PVDF.
The PVDF collet permits for the complete unit to adjust to different wall thicknesses of the silicone hoses, without affecting the pressure rating. Please also check the
chapter 8 for further information on CONNLOCK and the selection list for the suitable hoses.
on
Benets:
Titel: Silikon Schlauch,Flexible
Typ Connectors STHT-W
DrahtverstrkterSterilizable, Autoclavable
Silikonschlauch
Hardness: 60 70 Shore A
Eigenschaften: flexibel Taste- and odorless
Product Code Marking
sterilisierbar, autoklavierbar
geschmack- undHigh Pressure and Vacuum Resistance
geruchlos
Extremely
Produkte Code Beschriftung Resistant
hohe Druckbestndigkeit und Vakuumfestigkeit
Connections: On request, can be produced with:
extrem widerstandsfest
Vulcanized, Non-Metallic Fittings,
Anschlsse: Pressed, Metallic
Auf Wunsch konfektionierbar mit: Connections
Connlock MR-DN (Reusable Connections)
aufvulkanisierte nichtmetallische Fittings,
verpressten metallischen Anschlssen
Remarks: Connlock MR-DNTechnical contents are Anschlsse)
(wiederverwendbare subject to change
Connectors
ConnectorsSTHT-W
STHT-Wdrahtverstrkter
Wire-ReinforcedSilikonschlauch
Silicone Hose
Connectors
Connectorsgewebeverstrkter STHT-W
material reinforced weist exhibits
STHT-R ein sehr gutes Temperaturverhalten
very good auf. Der Inliner
temperature behaviour. Thewird ausschliesslich
inliner is created aus platinkataysiertem
exclusively from platinum cataylized silicone.
Silikon hergestellt.
Continuous Die kontinuierliche
extrusion of the inlinerExtrusion
allows des Inliners internal
a smooth gewhrleistet eineand
surface glatte
theInnenoberflche
most optimum undcleaning
die optimalsten Reinigungs-results.
and sterilization und
Sterilisierergebnisse. Die Drahtverstrkung
The material reinforcement wurde for
was developed fr erhhte Systemdrcke
increased und Vakuumapplikationen
system pressures. entwickelt.
Other properties of the connector STHT-R silicone hose are
Weitere
flawlessEigenschaften desgood
flexibility and Connectors STHT-W
chemical Silikon-Schlauches sind seine gute Flexibilitt und die gute chemische Bestndigkeit.
resistance.
WithDrahtverstrkung
Mit Stainless Steel wire and multiplefrply
und Vernetzung for higher
hhere pressure
Drcke and vacuum applications.
und Vakuumanwendungen.
Connectors
ConnectorsSTHT-W Schlauch
STHT-W Hose Abmessungen
Inventory Sizes
**C/F:
C/F:consult
consultfactory
factory
Schlauch-Typ
Hose Type Connectors
Connectors IDID IDID OD
OD Empfohlener
Recommended Minimaler
Minimum Minimaler
Minimum Gew.
Weight Unter-
Vacuum-
Artikel-Nr. Tol. Bereich Betriebsdruck Berstdruck Biegeradius per m druck
Item No. Tol. Range Working pressure Burst pressure Bending per rating
(mm) (mm) (mm) bei 20C (bar g) bei 20C (bar g) (mm) (kg) (bar)
19.5 - 21.3
ati 20C10,3
(bar g) ati 20C (bar g) radius kg/m (bar)
Connectors STHT-W 0500 603.000.500 12.7 +/- 0.2 34,5 77.0 0.5 -0.99
Connectors
Connectors STHT-W
STHT-W 0500
0750 603.000.500
603.000.750 12.7 /- 0.3 19.5
19.1 +/-+0.2 27.5- -21.3
30.0 8,6 10.3 34,5 34.5 102.77.0
0 00.5
.6 --0.99
0.99
Connectors
Connectors STHT-W
STHT-W 0750
1000 603.000.750
603.001.000 19.1 /- 0.3 27.5
25.4 +/-+0.3 34.5- -30.0
37.0 8,6 8.6 34,5 34.5 153102.0
.0 00.6
.7 --0.99
0.99
Connectors
Connectors STHT-W
STHT-W 1000
1250 603.001.000
603.001.250 25.4
31.8 +/-+0.3 39.5- -37.0
/- 0.3 34.5 42.0 8,6 8.6 34,5 34.5 193153.0
.0 10.7
,4 --0.99
0.99
Connectors
ConnectorsSTHT-W 1500
STHT-W 1250 603.001.500
603.001.250 38.1 +/-+0.3
31.8 46.0- -42.0
/- 0.3 39.5 49.5 8,6 8.6 34,5 34.5 203193.0
.0 11.4
,5 --0.99
0.99
Connectors STHT-W 2000 603.002.000 5 0 .8 + /- 0. 5 59.0 - 63.0
46.0 - 49.5 6,9 8.6 24,1 34.5 203203.0
.0 11.5
,6 --0.99
0.99
Connectors STHT-W 1500 603.001.500 38.1 +/- 0.3
Connectors STHT-W 2500 603.002.500 63.5 +/- 0.5 71.0 - 74.5 5,2 24,1 228.6 1,7 -0.99
Connectors STHT-W 2000 603.002.000 50.8 +/- 0.5 59.0 - 63.0 6.9 24.1 203.0 1.6 -0.99
Connectors STHT-W 3000 603.003.000 76.2 +/- 0.5 85.0 - 88.3 5,2 24,1 254.0 2,1 -0.99
Connectors STHT-W 2500 603.002.500 63.5 +/- 0.5 71.0 - 74.5 5.2 24.1 228.6 1.7 -0.99
Connectors STHT-W 4000 603.004.000 101.6 +/- 0.5 107.8 - 110.7 *C/F *C/F *C/F *C/F *C/F
Connectors STHT-W 3000 603.003.000 76.2 +/- 0.5 85.0 - 88.3 5.2 24.1 254.0 2.1 -0.99
Druck-/ Temperaturraten knnen durch die Endanschlsse begrenzt sein.
Connectors STHT-W 4000 603.004.000 101.6 +/- 0.5 107.8 - 110.7 *C/F *C/F *C/F *C/F *C/F
Pressure/limit rates can be limited by end connections.
Technical characteristics:
Burst pressure in relation The bursting pressure is reduced by around 10% per temperature increase of 93C
to the temperature: until the maximum hose temperature is reached.
The reduction is linear.
Marking: All hoses are marked according to CVAG_APN_0001.0 with the following:
Supplier
Hose type and size
Lot No
Norms
Production date
Description: S-COR PTFE Hose with Silicone-Cover (smooth PTFE Interior core)
S-COR PTFE Hose with smooth inner core for the highest demands
The S-COR PTFE hose has excellent chemical resistance. The inliner is made exclusively of Dupont T-62 - PTFE and is free of softeners,
supplementary materials and stabilisers. The continuous extrusion of the inliner guarantees a smooth interior
surface and optimum sterilization results.
Produktegruppe:
Description: SchlucheS-COR PTFE Hose with Silicone-Cover (smooth PTFE Interior core)
Characterization: Highly pure: Ideal for demanding analytic sampling and production processes.
Guaranteed taste, odor and color neutral. Maximum restistance against chemicals
Charakteristiken: Hochrein: Ideal fr anspruchsvolle analytische Probenahme und Produktionsprozesse.
with highest compatibility.
Garantiert geschmacks-, geruchs-, und farbneutral. Maximale Widerstandsfhigkeit gegen
Absorption resistant:
Chemikalien bei hchsterThe special PTFE surface minimizes the absorption of materials such
Vertrglichkeit.
as
Absorptionsbestndig: Die spezielle
color extracts, essential oilsPTFE
and Oberflche
proteins. minimiert
The hosediedoes
Absorption von
non discolour.
Materialien wie Farbextrakten, essentiellen len und Proteinen. Der Schlauch verfrbt sich
Humidity absorption <0.01%, corrosion resistant and non oxidizing.
nicht. Feuchtigkeitsabsorption <0.01%, korrosionsbestndig und nicht oxidierend.
Temperature-resistant: For temperaturevon
Temperaturbestndig: Fr temperaturbereiche ranges
-53Cfrom -62C Mehrfach
bis +230C. to +232C.
auto-
Autoclavable
klavierbar; idealmultiple
fr Dampftimes; ideal for steam
oder Anwendungen or applications
mit heissem l. Auch frwith hot oil.mittels
Sterilisation
UV-Strahlung
Also suitableoder
for andere Methoden
sterilization geeignet.of UV-RADIATION or other methods.
by means
Perfekte Oberflche: Maximale Durchflussraten. Ideal fr klebrige und viskose
Perfect surface: Maximum flow rates. Ideal for adhesive and viscose rayon liquids.
Flssigkeiten. Einfache und zuverlssige Reinigung.
Simple and
Chemisch reliable
inert: cleaning.
Bekannt als das in hchstem Ausmass chemisch inerte Material.
Chemically inert: recognised
Absolut korrosionsbestndig as the
und nicht most chemically inert material.
oxidierend.
Alterungsbestndig: Unabhngig von Zeit, Witterung oder UV-Strahlung. Altert nicht
Absolutely corrosion resistant and non oxidizing.
whrend des Gebrauchs.
Age resistant:
Reibungsfrei irrespective
Innen und Aussen:ofHochwertig
time, weather or UV-RADIATION.
verarbeitetes Geflecht. Glatt fr Wnde
Does not age during
bzw. Equipment. use. Verbindungen / Fittings. Glatte und saubere, temperaturbe-
Reibungsfreie
stndige Ummantelung.
Frictionless inside and outside: High-quality finished braiding. Smooth for walls and equipment.
Komplett Vakuum / Hochdruck-geeignet: Absolut sicher.
Frictionless connections/fittings. Smooth and clean, temperature resistant covering.
Hchste Biegsamkeit ohne bleibenden Knick. Konstante Durchflussraten auch bei ge-
Completely vacuum
bogenen S-COR and high pressure suitable: Absolutely safe. Highest level of pliancy
Schluchen.
without kink remaining.
mit ATEX-Zulassung fr ZoneConstant
1 (Innen) flow rates also with bent S-COR hoses.
Zertifikate: Food
USP Cindustry
lass VI
Cell culture
3A Standard
FDA 21 CFR 177.1550
Certificates: USP
USDAClass
lebensmitteltauglich
VI
3A Standard
FDA 21 CFR 177.1550
USDA food-suited
Description: SB-COR PTFE Hose with Silicone-Cover (smooth PTFE interior tube, electroconductive)
SB-COR PTFE hose with smooth interior tube (electrically conducting) for the highest demands
The SB-COR PTFE hose has excellent chemical resistance and excellent electrical conductivity. The inliner is made exclusively of PTFE
which is covered with black graphite. The black graphite meets the requirements of the FDA 21CFR 178.3297 standard.
Continous extrusion of the inliners ensures a smooth interior surface and optimum sterilization results.
Bezeichnung:
Description: SB-COR PTFE SB-COR
SchlauchPTFE
mit Silikon-Mantel (glatte PTFE (smooth
Hose with Silicone-Cover Innenseele,
PTFE elektrisch leitend)
interior tube, electroconductive)
Characterization: Highly pure: Ideal for demanding analytic sampling and production processes.
Charakteristiken: Hochrein: Ideal fr anspruchsvolle analytische Probenahme und Produktionsprozesse.
Guaranteed
Garantiert taste, odor
geschmacks-, and und
geruchs-, colorfarbneutral.
neutral. Maximum resistance againstgegen
Maximale Widerstandsfhigkeit chemicals
with highest
Chemikalien compatibility.
bei hchster Vertrglichkeit.
Electrically
Elektrisch leitend:conducting: for applications
fr Anwendungen where Aufladungen
wo elektrostatische electrostaticimcharges inside the hose must
Schlauch-
inneren vermieden werden mssen.
be avoided.
mit ATEX-Zulassung fr Zone
With ATEX permit 0 (Innen)
for zone 0 (interior)
Absorptionsbestndig: Die spezielle PTFE Oberflche minimiert die Absorption von
Absorption resistant: The special PTFE surface minimizes the absorption of materials such
Materialien wie Farbextrakten, essentiellen len und Proteinen. Der Schlauch verfrbt sich
as color excerpts, essential oils and proteins. The hose does non discolour.
nicht. Feuchtigkeitsabsorption <0.01%, korrosionsbestndig und nicht oxidierend.
Humidity absorption <0.01%, corrosion resistant and non oxidizing.
Temperaturbestndig: Fr temperaturbereiche von -53C bis +230C. Mehrfach auto-
Temperature-resistant:
klavierbar; ideal fr Dampf oderFor temperature
Anwendungen mitranges
heissemfrom -53C
l. Auch fr to +230C.mittels
Sterilisation
Autoclavable
UV-Strahlung multiple
oder andere times; ideal
Methoden for steam or applications with hot oil.
geeignet.
AlsoOberflche:
Perfekte suitable forMaximale
sterilization by means of
Durchflussraten. UV-RADIATION
Ideal fr klebrige undorviskose
other methods.
Flssigkeiten. Einfache Maximum
Perfect surface: und zuverlssige Reinigung.
flow rates. Ideal for adhesive and viscose rayon liquids.
Chemisch
Simpleinert:
andBekannt
reliablealscleaning.
das in hchstem Ausmass chemisch inerte Material.
Absolut korrosionsbestndig und nicht oxidierend.
Chemically inert: recognised as the most chemically inert material.
Alterungsbestndig: Unabhngig von Zeit, Witterung oder UV-Strahlung. Altert nicht
Absolutely corrosion resistant and non oxidizing.
whrend des Gebrauchs.
Age resistant: irrespective of time, weather or UV-RADIATION.
Reibungsfrei Innen und Aussen: Hochwertig verarbeitetes Geflecht. Glatt fr Wnde
bzw.Does not age
Equipment. during use.Verbindungen / Fittings. Glatte und saubere, temperaturbe-
Reibungsfreie
Frictionless
stndige inside and outside: High-quality finished braiding. Smooth for walls and equipment.
Ummantelung.
Frictionless
Komplett Vakuum connections/fittings. Smoothsicher.
/ Hochdruck-geeignet: Absolut and clean, temperature resistant covering.
Hchste Biegsamkeit
Completely ohne bleibenden
vacuum Knick. Konstante
and high pressure Durchflussraten
suitable: auchHighest
Absolutely safe. bei ge- level of pliancy
bogenen SB-COR
without kink Schluchen.
remaining. Constant flow rates also with bent SB-COR hoses.
Anschlsse:
Connections: mit TCrimped
ri-Clamp Ewith
ndenTri-Clamp
verpresst Ends
mit kundenspezifischen Anschlssen verpresst
Crimped with customized Connections
Product group:
Product group: Hoses Hoses
Description: U-COR PFA hose with Silicone-Cover (smooth PFA interior tube)
Title: U-COR PFA hose with silicone sheathing (smooth PFA interior tube)
U-COR PFA hose with smooth interior tube for the highest demands
The U-COR PFAU-COR PFAexcellent
hose has hose withchemical
smoothresistance.
interior tube
Thefor the highest
inliner is madedemands
exclusively from
PFA and is free of softeners, additives, and stabilisers.
The U-COR PFA hose has excellent chemical resistance. The inliner is made exclusively from PFA and is free of softeners, additives, and
The continuous extrusion of the inliner ensures a smooth internal surface and the most optimum sterilization results.
stabilizers. The continuous extrusion of the inliner ensures a smooth internal surface and optimum sterilization results.
- US Pharmacopoeia Class VI
- Food and Drug Administration (FDA)
- 21CFR177.1550
- 3A Sanitary Standard
- USDA Approved
Technical dataTechnical
for U-CORdata
PFA for
hoseS-COR PTFE hose
Hoses-Type Hose-Type ConnectorsInterior diameter
Item-Number InteriorExternal diameter
Exterior Minimum
Minimum
bending Operating
Operating Bursting Temperature
Bursting pressure Hose weight
Temperature Hose weight
Item No. mm diameter mm diameter bending
radius pressure
pressure at pressureatat range range kg/m kg/m
mm
radius 20C
at 20C 20C 20C C C
U-COR 08 U-COR 08604.400.500 604.400.500
12.7 12.70
20.3 20.3 38.1 38.1 20.6 20.6 82.6 -53 to
82.6 -53230
bis 204 0.300.30
U-COR 12 604.400.750 19.05 28.6 63.5 20.6 82.6 -53 to 230 0.57
U-COR 12 604.400.750 19.05 28.6 63.5 20.6 82.6 -53 bis 204 0.57
U-COR 16 604.401.000 25.40 37.0 102.0 17.2 68.9 -53 to 230 0.94
U-COR 16 604.401.000 25.4 37.0 102.0 17.2 68.9 -53 bis 204 0.94
U-COR 20 604.401.250 31.75 40.5 177.8 13.8 55.1 -53 to 230 1.30
U-COR 20 604.401.250 31.75 40.5 177.8 13.8 55.1 -53 bis 204 1.30
U-COR 24 604.401.500 38.10 51.1 178.0 13.7 55.1 -53 to 230 1.30
U-COR 24 604.401.500 38.1 51.1 178.0 13.7 55.1 -53 bis 204 1.30
U-COR 32 604.402.000 50.80 63.8 178.0 10.3 41.3 -53 to 230 1.90
U-COR 32 604.402.000 50.8 63.8 178.0 10.3 41.3 -53 bis 204 1.90
Pressure/Temperature rates can be limited by end connections.
Druck-/Temperaturraten knnen durch die Endanschlsse begrenzt sein.
Description: U-COR PFA hose with silicone sheathing (smooth PFA interior tube)
Characterization: Highly pure: Ideal for demanding analytic sampling and production processes.
Guaranteed taste, odor and color neutral. Maximum resistance against chemicals
with highest compatibility.
Absorption resistant: The special PTFE surface minimizes the absorption of materials such
as color excerpts, essential oils and proteins. The hose does not discolour.
Humidity absorption <0.01%, corrosion resistant and non oxidizing.
Temperature-resistant: For temperature ranges from -53C to +230C.
Autoclavable multiple times; ideal for steam or applications with hot oil.
Also suitable for sterilization by means of UV-RADIATION or other methods.
Perfect surface: Maximum flow rates. Ideal for adhesive and viscose rayon liquids.
Simple and reliable cleaning.
Chemically inert: recognised as the most chemically inert material.
Absolutely corrosion resistant and non oxidizing.
Age resistant: irrespective of time, weather or UV-RADIATION.
Does not age during use.
Frictionless inside and outside: High-quality finished braiding.
Smooth for walls and equipment. Frictionless connections/fittings.
Smooth and clean, temperature resistant covering.
Completely vacuum and high pressure suitable: Absolutely safe.
Highest level of pliancy without kink remaining.
Constant flow rates also with bent SB-COR hoses.
With ATEX permit for zone 1 (interior)
UB-COR PFA Schlauch with smooth interior tube (electrically conducting) for the highest demands
UB-COR PFA Hose with smooth interior tube (electroconductive) for the highest demands
The UB-COR PFA hose has excellent chemical resistance. The inliner is made exclusively of
PFA and is free of softeners, additivesPFA
The UB-COR and hose
stabilisers.
has excellent chemical resistance. The inliner is made exclusively of PFA and is free of softeners, additives and
The black graphite meets the requirements
stabilizers. of the
The black FDA 21CFR
graphite meets178.3297 standard.ofThe
the requirements thecontinuous
FDA 21CFR extrusion of thestandard.
178.3297 inliner guarantees a smoothextrusion
The continuous interior surface and the most
of the inliner
optimum sterilisation results.
guarantees a smooth interior surface and optimum sterilization results.
Description: UB-COR PFA hose with silicone sheathing (smoth PTFE interior tube, electroconductive)
Characterization: Highly pure: Ideal for demanding analytic sampling and production processes.
Guaranteed taste, odor and color neutral. Maximum resistance against chemicals
with highest compatibility.
Electrically conducting: for applications where eletrostatic charges must be avoided
in the hose interior.
With ATEX permit for zone 0 (interior)
Absorption resistant: The special PTFE surface minimizes the absorption of materials such
as color excerpts, essential oils and proteins. The hose does non discolor.
Humidity absorption <0.01%, corrosion resistant and non oxidizing.
Temperature-resistant: For temperature ranges from -53C to +230C.
Autoclavable multiple times; ideal for steam or applications with hot oil.
Also suitable for sterilization by means of UV-RADIATION or other methods.
Perfect surface: Maximum flow rates. Ideal for adhesive and viscose rayon liquids.
Simple and reliable cleaning.
Chemically inert: recognised as the most chemically inert material.
Absolutely corrosion resistant and not oxidizing.
Age resistant: irrespective of time, weather or UV-RADIATION.
Does not age during the use.
Frictionless inside and outside: High-quality finished braiding.
Smooth for walls and equipment. Frictionless connections/fittings.
Smooth and clean, temperature resistant covering.
Completely vacuum and high pressure suitably: Absolutely safe.
Highest level of pliancy without kink remaining.
Constant flow rates also with bent SB-COR hoses.
Custom configurations
The Cell Cull - Bottle Tops are also available in sizes other than those in our table below as well as in custom sizes.
Please consult our factory for dimensions, design and prices.
Variants 1.1 Silicone 3 9.50 9.50 7.00 6.40 6.40 2.40 601.001.999.-1
Variants 2.1 Silicone 2 9.50 9.50 - 6.40 6.40 - 601.001.996.-1
Accessory:
GL45 screw cap, red PBT 601.001.995
Brief description:
Pump tubes are subjected to very heavy mechanical loads. Connectors pump segments are highly resistant and
very easy to replace. Only the segment of the pump segment that is put under the most severe stress is replaced.
Connectors pump segments are suitable for many conventional peristaltic pump heads.
For more information please contact Connectors.
L2 L1 TC ID WS Item No.
Valid standards: DIN 11864-1 with weld-on end acc. DIN 11866, Series B (ISO 1127)
Nut acc. DIN 11851
Material: Stnr.-W. 1.4435 BN2 & 1.4301 (Fe < 0.5%) acc. EN 10088-1
EPDM Ethylene-Propylene-Diene rubber
Version / Surface quality: Right-angled weld-on ends for orbital-welding
Ra, internal < 0.4 m, Ra, external < 1.6 m
Pipe-Hygiene Classes: H 3 acc. DIN 11866
Marking: Size, material number, melt number, manufacturer code
Certificates: Certificate acc. EN 10204-3.1B, FDA-Certificate,
Certificate acc. EN 10204-2.2
Option: Electropolishing
Remarks: *All pressures can be used up to 140C when using suitable elastomers.
Technical contents are subject to change
Valid standards: DIN 11864-1 with weld-on end acc. DIN 11866, Series B (ISO 1127)
Material: Stnr.-W. 1.4435 BN2 (Fe < 0.5%) acc. EN 10088-1
Permissible sterilization temperature: 150C
Version / Surface quality: Right-angled weld-on ends for orbital-welding
Ra, internal < 0.4 m, Ra, external < 1.6 m
Pipe-Hygiene Classes: H 3 acc. DIN 11866
Marking: Size, material number, melt number, manufacturer code
Certificates: Certificate acc. EN 10204-3.1B
Option: Electropolishing
Remarks: Technical contents are subject to change
DIN 11864-1 with weld-on ends acc. DIN 11866, Series B (ISO 1127)
ISO DN 8 RD 28 x 1/8" 13.5 10.3 41.0 222.011.008
ISO DN 10 RD 34 x 1/8" 17.2 14.0 41.0 222.011.010
ISO DN 15 RD 44 x 1/6" 21.3 18.1 43.0 222.011.015
ISO DN 20 RD 52 x 1/6" 26.9 23.7 43.0 222.011.020
ISO DN 25 RD 58 x 1/6" 33.7 29.7 48.0 222.011.025
ISO DN 32 RD 65 x 1/6" 42.4 38.4 48.0 222.011.032
ISO DN 40 RD 78 x 1/6" 48.3 44.3 49.0 222.011.040
ISO DN 50 RD 95 x 1/6" 60.3 56.3 60.0 222.011.050
ISO DN 65 RD 110 x 1/4" 76.1 72.1 64.0 222.011.065
ISO DN 80 RD 130 x 1/4" 88.9 84.3 64.0 222.011.080
Valid standards: DIN 11864-1 with weld-on end acc. DIN 11866, Series B (ISO 1127)
Material: Stnr.-W. 1.4435 BN2 (Fe < 0.5%) acc. EN 10088-1
Permissible sterilization temperature: 150C
Version / Surface quality: Right-angled weld-on ends for orbital-welding
Ra, internal < 0.8 m, Ra, external < 1.6 m
Pipe-Hygiene Classes: H 3 acc. DIN 11866
Marking: Size, material number, melt number, manufacturer code
Certificates: Certificate acc. EN 10204-3.1B
Option: Electropolishing
Remarks: Technical contents are subject to change
DIN 11864-1 with weld-on ends acc. DIN 11866, Series B (ISO 1127)
ISO DN 8 21.9 13.5 10.3 39.0 222.012.008
ISO DN 10 27.9 17.2 14.0 39.0 222.012.010
ISO DN 15 35.9 21.3 18.1 40.0 222.012.015
ISO DN 20 42.9 26.9 23.7 41.0 222.012.020
ISO DN 25 48.9 33.7 29.7 47.0 222.012.025
ISO DN 32 54.9 42.4 38.4 47.0 222.012.032
ISO DN 40 66.9 48.3 44.3 48.0 222.012.040
ISO DN 50 84.9 60.3 56.3 62.0 222.012.050
ISO DN 65 98.9 76.1 72.1 61.0 222.012.065
ISO DN 80 118.9 88.9 84.3 68.0 222.012.080
Valid standards: DIN 11864-1 for pipe connection acc. DIN 11866, Series B (ISO 1127)
Material: Stnr.-W. 1.4435 BN2 (Fe < 0.5%) acc. EN 10088-1
Permissible sterilization temperature: 150C
Version / Surface quality: Ra, internal < 0.8 m, Ra, external < 1.6 m
Pipe-Hygiene Classes: H 3 acc. DIN 11866
Marking: Size, material number, melt number, manufacturer code
Certificates: Certificate acc. EN 10204-3.1B
Option: Electropolishing
Remarks: Technical contents are subject to change
DIN 11864-1
ISO DN 8 RD 28 x 1/8" 23.0 19.0 24.0 222.013.008
ISO DN 10 RD 34 x 1/8" 28.0 24.0 24.0 222.013.010
ISO DN 15 RD 44 x 1/6" 34.0 30.0 24.0 222.013.015
ISO DN 20 RD 52 x 1/6" 44.0 41.0 24.0 222.013.020
ISO DN 25 RD 58 x 1/6" 53.0 46.0 24.0 222.013.025
ISO DN 32 RD 65 x 1/6" 58.0 50.0 24.0 222.013.032
ISO DN 40 RD 78 x 1/6" 72.0 65.0 24.0 222.013.040
ISO DN 50 RD 95 x 1/6" 87.0 80.0 28.0 222.013.050
ISO DN 65 RD 110 x 1/4" 100.0 95.0 28.0 222.013.065
ISO DN 80 RD 130 x 1/4" 120.0 115.0 30.0 222.013.080
Thread
Valid standards: DIN 11864-1 for pipe connection acc. DIN 11866 Series B (ISO 1127)
Material: Stnr.-W. 1.4435 BN2 (Fe < 0.5%) acc. EN 10088-1
Permissible sterilization temperature: 150C
Version / Surface quality: Ra, internal < 0.8 m, Ra, external < 1.6 m
Pipe-Hygiene Classes: H 3 acc. DIN 11866
Marking: Size, material number, melt number, manufacturer code
Certificates: Certificate acc. EN 10204-3.1B
Option: Electropolishing
Remarks: Technical contents are subject to change
DIN 11864-1
ISO DN 8 21.9 18.0 9.0 222.014.008
ISO DN 10 27.9 24.0 9.0 222.014.010
ISO DN 15 35.9 30.0 10.0 222.014.015
ISO DN 20 42.9 35.0 12.0 222.014.020
ISO DN 25 48.9 41.0 13.0 222.014.025
ISO DN 32 54.9 48.0 13.0 222.014.032
ISO DN 40 66.9 61.0 14.0 222.014.040
ISO DN 50 84.9 79.0 16.0 222.014.050
ISO DN 65 98.9 93.0 16.0 222.014.065
ISO DN 80 118.9 114.0 20.0 222.014.080
Valid standards: DIN 11864-2 with weld-on end acc. DIN 11866, Series B (ISO 1127)
Material: Stnr.-W. 1.4435 BN2 (Fe < 0.5%) acc. EN 10088-1
EPDM Ethylene-Propylene-Diene rubber
Version / Surface quality: Right-angled weld-on ends for orbital-welding
Ra, internal < 0.8 m, Ra, external < 1.6 m
Pipe-Hygiene Classes: H 3 acc. DIN 11866
Marking: Size, material number, melt number, manufacturer code
Certificates: Certificate acc. EN 10204-3.1B, FDA-Certificate
Option: Electropolishing
Remarks: *All pressures can be used up to 140C when using suitable elastomers.
Torque rating for screws/nuts DN 8 to DN 50: 23 Nm
DN 65 to DN 100: 46 Nm. Technical contents are subject to change
Valid standards: DIN 11864-2 with weld-on end acc. DIN 11866, Series B (ISO 1127)
Material: Stnr.-W. 1.4435 BN2 (Fe < 0.5%) acc. EN 10088-1
Permissible sterilization temperature: 150C
Version / Surface quality: Weld-on ends for orbital-welding
Ra, internal < 0.8 m, Ra, external < 1.6 m
Pipe-Hygiene Classes: H 3 acc. DIN 11866
Marking: Size, material number, melt number, manufacturer code
Certificates: Certificate acc. EN 10204-3.1B
Option: Electropolishing
Remarks: Technical contents are subject to change
DIN 11864-2 with weld-on ends acc. DIN 11866, Series B (ISO 1127)
ISO DN 8 54.0 13.5 10.3 41.5 37.0 222.021.008
ISO DN 10 59.0 17.2 14.0 41.5 42.0 222.021.010
ISO DN 15 62.0 21.3 18.1 41.5 45.0 222.021.015
ISO DN 20 69.0 26.9 23.7 41.5 52.0 222.021.020
ISO DN 25 74.0 33.7 29.7 46.5 57.0 222.021.025
ISO DN 32 82.0 42.4 38.4 46.5 65.0 222.021.032
ISO DN 40 88.0 48.3 44.3 46.5 71.0 222.021.040
ISO DN 50 103.0 60.3 56.3 55.5 85.0 222.021.050
ISO DN 65 125.0 76.1 72.1 57.5 104.0 222.021.065
ISO DN 80 137.0 88.9 84.3 59.5 116.0 222.021.080
ISO DN 100 168.0 114.3 109.7 59.5 146.0 222.021.100
Valid standards: DIN 11864-2 with pipe connection acc. DIN 11866, Series B (ISO 1127)
Material: Stnr.-W. 1.4435 BN2 (Fe < 0.5%) acc. EN 10088-1
Permissible sterilization temperature: 150C
Version / Surface quality: Right-angled weld-on ends for orbital-welding
Ra, internal < 0.8 m, Ra, external < 1.6 m
Pipe-Hygiene Classes: H 3 acc. DIN 11866
Marking: Size, material number, melt number, manufacturer code
Certificates: Certificate acc. EN 10204-3.1B
Option: Electropolishing
Remarks: Technical contents are subject to change
DIN 11864-2 with with pipe connection acc. DIN 11866, Series B (ISO 1127)
ISO DN 8 54.0 13.5 10.3 40.0 37.0 222.022.008
ISO DN 10 59.0 17.2 14.0 40.0 42.0 222.022.010
ISO DN 15 62.0 21.3 18.1 40.0 45.0 222.022.015
ISO DN 20 69.0 26.9 23.7 40.0 52.0 222.022.020
ISO DN 25 74.0 33.7 29.7 45.0 57.0 222.022.025
ISO DN 32 82.0 42.4 38.4 45.0 65.0 222.022.032
ISO DN 40 88.0 48.3 44.3 45.0 71.0 222.022.040
ISO DN 50 103.0 60.3 56.3 54.0 85.0 222.022.050
ISO DN 65 125.0 76.1 72.1 56.0 104.0 222.022.065
ISO DN 80 137.0 88.9 84.3 58.0 116.0 222.022.080
ISO DN 100 168.0 114.3 109.7 58.0 146.0 222.022.100
Valid standards: DIN 11864-2 for pipe connection acc. DIN 11866 Series B (ISO 1127)
Material: Stnr.-W. 1.4435 BN2 (Fe < 0.5%) acc. EN 10088-1
Permissible sterilization temperature: 150C
Version / Surface quality: Right-angled weld-on ends for orbital-welding
Ra, internal < 0.8 m, Ra, external < 1.6 m
Pipe-Hygiene Classes: H 3 acc. DIN 11866
Marking: Size, material number, melt number, manufacturer code
Certificates: Certificate acc. EN 10204-3.1B
Option: Electropolishing
Remarks: Technical contents are subject to change
DIN 11864-2
ISO DN 8 54.0 37.0 11.5 222.023.008
ISO DN 10 59.0 42.0 11.5 222.023.010
ISO DN 15 62.0 45.0 11.5 222.023.015
ISO DN 20 69.0 52.0 11.5 222.023.020
ISO DN 25 74.0 57.0 11.5 222.023.025
ISO DN 32 82.0 65.0 11.5 222.023.032
ISO DN 40 88.0 71.0 11.5 222.023.040
ISO DN 50 103.0 85.0 11.5 222.023.050
ISO DN 65 125.0 104.0 13.5 222.023.065
ISO DN 80 137.0 116.0 13.5 222.023.080
ISO DN 100 168.0 146.0 15.5 222.023.100
Valid standards: DIN 11864-2 for pipe connection acc. DIN 11866 Series B (ISO 1127)
Material: Stnr.-W. 1.4435 BN2 (Fe < 0.5%) acc. EN 10088-1
Permissible sterilization temperature: 150C
Version / Surface quality: Ra, internal < 0.8 m, Ra, external < 1.6 m
Pipe-Hygiene Classes: H 3 acc. DIN 11866
Marking: Size, material number, melt number, manufacturer code
Certificates: Certificate acc. EN 10204-3.1B
Option: Electropolishing
Remarks: Technical contents are subject to change
DIN 11864-2
ISO DN 8 54.0 37.0 10.0 222.024.008
ISO DN 10 59.0 42.0 10.0 222.024.010
ISO DN 15 62.0 45.0 10.0 222.024.015
ISO DN 20 69.0 52.0 10.0 222.024.020
ISO DN 25 74.0 57.0 10.0 222.024.025
ISO DN 32 82.0 65.0 10.0 222.024.032
ISO DN 40 88.0 71.0 10.0 222.024.040
ISO DN 50 103.0 85.0 10.0 222.024.050
ISO DN 65 125.0 104.0 12.0 222.024.065
ISO DN 80 137.0 116.0 12.0 222.024.080
ISO DN 100 168.0 146.0 14.0 222.024.100
Valid standards: DIN 11864-3 with pipe connection acc. DIN 11866, Series B (ISO 1127)
Material: Stnr.-W. 1.4435 BN2 (Fe < 0.5%) acc. EN 10088-1
EPDM Ethylene-Propylene-Diene rubber
Version / Surface quality: Right-angled weld-on ends for orbital-welding
Ra, internal < 0.8 m, Ra, external < 1.6 m
Pipe-Hygiene Classes: H 3 acc. DIN 11866
Marking: Size, material number, melt number, manufacturer code
Certificates: Certificate acc. EN 10204-3.1B, FDA-Certificate
Option: Electropolishing
Remarks: *All pressures can be used up to 140C when using suitable elastomers.
Torque rating Hexagon-Nut: 5 Nm
Technical contents are subject to change
Valid standards: DIN 11864-3 with pipe connection acc. DIN 11866, Series B (ISO 1127)
Material: Stnr.-W. 1.4435 BN2(Fe < 0.5%) acc. EN 10088-1
Permissible sterilization temperature: 150C
Version / Surface quality: Right-angled weld-on ends for orbital-welding
Ra, internal < 0.8 m, Ra, external < 1.6 m
Pipe-Hygiene Classes: H 3 acc. DIN 11866
Marking: Size, material number, melt number, manufacturer code
Certificates: Certificate acc. EN 10204-3.1B
Option: Electropolishing
Remarks: Technical contents are subject to change
DIN 11864-3 with pipe connection acc. DIN 11866, Series B (ISO 1127)
ISO DN 8 34.0 13.5 10.3 26.0 39.5 222.031.008
ISO DN 10 34.0 17.2 14.0 26.0 39.5 222.031.010
ISO DN 15 34.0 21.3 18.1 26.0 40.5 222.031.015
ISO DN 20 50.5 26.9 23.7 30.0 40.0 222.031.020
ISO DN 25 50.5 33.7 29.7 30.0 45.5 222.031.025
ISO DN 32 64.0 42.4 38.4 30.0 45.5 222.031.032
ISO DN 40 64.0 48.3 44.3 30.0 46.5 222.031.040
ISO DN 50 91.0 60.3 56.3 40.0 58.5 222.031.050
ISO DN 65 106.0 76.1 72.1 40.0 60.0 222.031.065
ISO DN 80 119.0 88.9 84.3 40.0 62.5 222.031.080
ISO DN 100 144.4 114.3 109.7 40.0 66.5 222.031.100
Valid standards: DIN 11864-3 with pipe connection acc. DIN 11866, Series B (ISO 1127)
Material: Stnr.-W. 1.4435 BN2 (Fe < 0.5%) acc. EN 10088-1
Permissible sterilization temperature: 150C
Version / Surface quality: Right-angled weld-on ends for orbital-welding
Ra, internal < 0.8 m, Ra, external < 1.6 m
Pipe-Hygiene Classes: H 3 acc. DIN 11866
Marking: Size, material number, melt number, manufacturer code
Certificates: Certificate acc. EN 10204-3.1B
Option: Electropolishing
Remarks: Technical contents are subject to change
DIN 11864-3 with pipe connection acc. DIN 11866, Series B (ISO 1127)
DIN 11864-3 8 34.0 13.5 10.3 26.0 38.0 222.032.008
DIN 11864-3 10 34.0 17.2 14.0 26.0 38.0 222.032.010
DIN 11864-3 15 34.0 21.3 18.1 26.0 39.0 222.032.015
DIN 11864-3 20 50.5 26.9 23.7 30.0 39.0 222.032.020
DIN 11864-3 25 50.5 33.7 29.7 30.0 44.0 222.032.025
DIN 11864-3 32 64.0 42.4 38.4 30.0 44.0 222.032.032
DIN 11864-3 40 64.0 48.3 44.3 30.0 45.0 222.032.040
DIN 11864-3 50 91.0 60.3 56.3 40.0 57.0 222.032.050
DIN 11864-3 65 106.0 76.1 72.1 40.0 58.5 222.032.065
DIN 11864-3 80 119.0 88.9 84.3 40.0 61.0 222.032.080
DIN 11864-3 100 144.4 114.3 109.7 40.0 65.0 222.032.100
Valid standards: DIN 11864-3 for pipe connection acc. DIN 11866, Series B (ISO 1127)
Material: Stnr.-W. 1.4435 BN2 (Fe < 0.5%) acc. EN 10088-1
Permissible sterilization temperature: 150C
Version / Surface quality: Ra, internal < 0.8 m, Ra, external < 1.6 m
Pipe-Hygiene Classes: H 3 acc. DIN 11866
Marking: Size, material number, melt number, manufacturer code
Certificates: Certificate acc. EN 10204-3.1B
Option: Electropolishing
Remarks: Technical contents are subject to change
DIN 11864-3
ISO DN 8 34.0 25.0 11.5 222.033.008
ISO DN 10 34.0 25.0 11.5 222.033.010
ISO DN 15 34.0 25.0 11.5 222.033.015
ISO DN 20 50.5 42.0 11.5 222.033.020
ISO DN 25 50.5 42.0 11.5 222.033.025
ISO DN 32 64.0 54.0 11.5 222.033.032
ISO DN 40 64.0 54.0 11.5 222.033.040
ISO DN 50 91.0 78.0 11.5 222.033.050
ISO DN 65 106.0 93.0 13.5 222.033.065
ISO DN 80 119.0 104.0 13.5 222.033.080
ISO DN 100 144.4 124.0 15.5 222.033.100
Valid standards: DIN 11864-3 for pipe connection acc. DIN 11866 Series B ISO 1127
Material: Stnr.-W. 1.4435 BN2 (Fe < 0.5%) acc. EN 10088-1
Permissible sterilization temperature: 150C
Version / Surface quality: Ra, internal < 0.8 m, Ra, external < 1.6 m
Pipe-Hygiene Classes: H 3 acc. DIN 11866
Marking: Size, material number, melt number, manufacturer code
Certificates: Certificate acc. EN 10204-3.1B
Option: Electropolishing
Remarks: Technical contents are subject to change
DIN 11864-3
ISO DN 8 34.0 25.0 11.5 222.034.008
ISO DN 10 34.0 25.0 11.5 222.034.010
ISO DN 15 34.0 25.0 11.5 222.034.015
ISO DN 20 50.5 42.0 11.5 222.034.020
ISO DN 25 50.5 42.0 11.5 222.034.025
ISO DN 32 64.0 54.0 11.5 222.034.032
ISO DN 40 64.0 54.0 11.5 222.034.040
ISO DN 50 91.0 78.0 13.5 222.034.050
ISO DN 65 106.0 93.0 13.5 222.034.065
ISO DN 80 119.0 104.0 13.5 222.034.080
ISO DN 100 144.4 124.0 13.5 222.034.100
Valid standards: DIN 11864 for pipe connection acc. DIN 11866, Series B (ISO 1127)
Material: EPDM Ethylene-Propylene-Diene rubber
Viton (FEP), Viton polymerisate made of vinylidene fluorides and hexafluoride propylenes
Permissible sterilization temperature: Viton (FEP): 150C, EPDM: 132C (150C for a short time)
Version / Surface quality: Surface smooth and nonporous, free of laminar recesses and ridges.
Edges without tears and notches.
Marking: Marking on packing units
Certificates: Incl. Certificate of conformance FDA-21 CFR 177.2600 for gasket materials.
Remarks: Technical contents are subject to change
Viton is a registered trademark of DuPont Dow Elastomers
www.connectors.ch
Connectors Verbindungstechnik AG Conditions of Sale and Supply
1. SCOPE
1.1 These General Terms and Conditions of Purchase (the "Purchase Terms") shall apply exclusively for the delivery or products and the performance of related works
or services (the "Products") by the supplier (the "Supplier") to Connectors Verbindungstechnik AG ("Connectors").
1.2 Other provisions, in particular the Supplier's general terms and conditions, shall not apply, irrespective of whether or not such general terms and conditions have
been expressly rejected by Connectors or not. The Purchase Terms shall also apply exclusively if Connectors, having knowledge of other general terms and
conditions, effects contractual performance without reservation.
1.3 Any additional or special agreements between Connectors and the Supplier require written form in order to be effective. This also applies to the cancellation of this
written form requirement.
2. PURCHASE ORDERS
2.1 Purchase orders by Connectors are valid only if made in writing, text form (including fax and e-mail) or through electronic data interchange (EDI) by authorized
representatives of Connectors.
2.2 Purchase orders by Connectors are to be accepted by the Supplier within one week. Thereafter, Connectors shall no longer be bound by the respective purchase
order. As of the second delivery, the respective purchase order shall be deemed accepted if the Supplier does not accept such a purchaser order within one week.
2.3 Changes or amendments to a purchase order require Connectors express confirmation in order to be effective. The confirmation is subject to the requirements of Clause.
Connectors may request the Supplier to accept reasonable changes in manufacture or processing of the Products.
2.4 Unless otherwise agreed in writing, no remuneration or reimbursement of costs shall be paid for visits or the drawing-up of cost estimates, project studies or other
preparatory documents for the conclusion of a contract.
17. SEVERABILITY
17.1 Should individual provisions of these Purchase Terms be or become invalid, the validity of the remaining provisions shall not be affected thereby.