Scooptram ST14
Scooptram ST14
Scooptram ST14
Scooptram St14
technical specification
features
Safe working environment Peak performance
Excellent visibility with a low rear hood height and larger When compared to a gear pump hydraulic system, the more
window area efficient load sensing variable displacement hydraulic pump
Door interlock (applies brakes, blocks steering and bucket/ system increases tractive effort up to 44 percent when dig-
boom movement when door opens) ging and increases unit tramming speed on grade by up to
Automatic brake test logging 14 percent
Spring applied hydraulic released (SAHR) brakes An enhanced boom and load frame geometry optimizes
Oil free operators compartment digging performance
Cab in line with the tyres for improved manoeuvrability and
Superior operators comfort same turning radius in both directions
Spacious Atlas Copco Footbox Integrated de-clutch function for more efficient truck load-
Low sound level in optional cab ing
Low vibration level in cab
A durable, air suspended seat Serviceability
Dump & hoist control located in the right side armrest Easy access to service points, filters and valve blocks
Door mounted monostick steering control The well proven Atlas Copco Control system (RCS)
Simple, clear and multi-functional display in cab providing service information and diagnostics logged and
Extended wheel base for a steady ride during tramming displayed in clear text on screen
Specifications
Capacities Motion times Weights
kg Tramming capacity 14000 sec Boom raising 7.6 Standard equipped vehicle (empty bucket)
Breakout force, hydraulic 22300 Boom lowering 3.0
kg Approximate weight 38000
Breakout force, mechanical 18240 sec Dumping 1.8 Axle load, front end 19115
m 3
Standard bucket volume (nominal heaped) 6.4 Axle load, rear end 18885
Tyres
Tubeless, smooth, extra deep tread design for underground
mine service
Tyre size.............................................. 26.5 x 25 32 Ply L5S*
Grade performance
Standard configuration, bucket empty
% Grade 0.0 2.0 4.0 6.0 8.0 10.0 12.5 14.0 16.0 18.0 20.0 25.0
km/h 1st gear 5.1 5.1 5.1 5.0 5.0 4.8 4.8 4.8 4.6 4.6 4.5 4.3
2nd gear 10.6 10.3 10.1 9.8 9.5 9.3 8.8 8.3 7.7 7.0 6.4 4.8
3rd gear 17.7 16.9 16.1 15.1 13.5 11.6 9.3
4th gear 29.4 26.9 21.5 15.9
3% rolling resistance assumed. Actual performance may vary depending on the application.
km/h 1st gear 5.0 4,8 4.7 4.7 4.5 4.5 4.3 4.3 4.3 4.2 4.0 3.7
2nd gear 10.0 9.5 9.3 9.0 8.7 8.0 7.1 6.4 5.6 4.8 4.2
3rd gear 16.4 15.4 14.3 12.2 9.8
4th gear 26.9 21.9 15.0
3% rolling resistance assumed. Actual performance may vary depending on the application.
Optional Equipment
Measurements
Dimensions
44 All dimensions are shown in millime-
tres
All dimensions and calculations shown
3 806
are based on standard vehicle con-
4 464
figuration with 27mm tyre deflection,
unloaded
Copyright 2010, Atlas Copco Rock Drills AB, rebro, Sweden. All product names in this publication are trademarks of Atlas Copco. Any unauthorized use or copying of the contents or any part thereof is prohibited. Illustrations and photos
may show equipment with optional extras. No warranty is made regarding specifications or otherwise. Specifications and equipment are subject to change without notice. Consult your Atlas Copco Customer Center for specific information.
R7
1
06
R3 4
14
2 000 x 45
3 806
4 464
5 930
5 120
H1
4 115
3 640
H2 2 380
2 550
T2 1 935
1 960
13.4 435
L1 1 680
3 385 2 020 1 835 1 820
3 855 T1 3 585
10 825
SIde View
2 800 (W)
2 640
TOP view
Tramming position: Axle centerline to bucket lip (mm) T1 3 670 3 585 3 550 3 480
9851 2350 01 o
Tramming position: Ground to bucket tip (mm) T2 2 050 1 935 1 860 1 785
Raised position: Back height, max. (mm) H1 5 930 5 930 5 930 5 930
Raised position: Bucket tip, height (mm) H2 2 285 2 380 2 440 2 500