Fesco

1.
A moving iron ammeter coil has few turns of thick wire in order to have:
A. Low resistance
B. High sensitivity
C. Effective damping
D. Large scale
2. When shunt resistance of Galvanometer circuit increases its
Current sensitivity increases
Current sensitivity decreases
Controlling Torque decreases
Damping increase
3. Which relay used in transformer
..

Buchholzs Relay
..
4. ____ is defined as the measurements of instrument by which it is error free
A. Accuracy
B. Precision
C. Resolution
5. A _____ meter is used a null detector in Wheatstone bridge :
A. Ammeter
B. Voltmeter
C. Galvanometer
6. Which bridge is used for measuring inductance :
A. Kelvin Bridge
B. Hay Bridge
C. Wheatstone Bridge
D. Sheering Bridge
7. Which bridge is used for measuring resistance :
A. Kelvin Bridge
B. Hay Bridge
D. Sheering Bridge
8. wavelength of EM waves after reflecting at angle on a surface
a- increases in actual direction of propagation
b- changes in a direction perpendicular to it
c- same as in space
9. When electric field is parallel to the plane of incidence, the electromagnetic wave is said
to be
Linear Polarized
D Was answer.(Parallel polarization also known as p-polarization or pi polarization or
TM Polarization)
10. The fact that conductor carry more current on the surface as compare to core is known
as
Skin Effect
Hall Effect
Corona effect
None of above
11. Delta*H = J + D
Maxwell Equation
Gausss Law
Amperes Law
None of above
12. A voltage source having constant voltage across its terminals(E=V) no matter what's the current
flowing through it (D)
Ideal Voltage Source
Constant current source
Ideal Current Source
Constant resistance source
13. Three main component of circuit are Resistance, Inductacne and

Diode
Capcitance
Bjts
Fets
14. Sum of all Potentail Difference in complete loop through circuit is
Equal to zero
Equal to to individual voltage
Equal to individual current
Equal to resisitance
15. Fundamental property used in single node pair circuit analyzer is that ...........across all elements is
same.
A. current
B. voltage
C. resistance
16. If node voltage is VAB Then which on is chosen as reference
Node A
Node B
Origin
17. Which bridge is used for measuring low resistance accurately :
A. Kelvin Bridge
B. Hay Bridge
D. Sheering Bridge
18. At Unity Power Factor, Armature Flux is??
a. Cross Magnetizing
b. Demagnetizing
c. zero
19. . If R1 is the resistance of a coil of copper at t oC and RT is the resistance at T oC and also the
resistance temperature coefficient of copper per degree centigrade at 0oC is 1/234.45, then
Rt/RT
(A) (1+t) / (1+T)
(B) (1+ 234.45t) / (1+234.45 T)
(C) (234.45 + t) / (234.45 + T)
(D) (234.45 + t2 ) / (234.45 + T 2).
20. The rotor winding has resistance 85 ohms at temperature 22 degree ,if resistance
increases to 100 ohms with temperature coefficient 0.004, what would be the
temperature
1) 20 degrees
2) 50 degrees
3) 70 degrees
4)100 degrees
5) 120 degrees
21. A 100 Volt bulb has resistance of 500 Ohm. Number of hours it can work for every KWH
energy consumed will be
A. 20
B. 40
C. 50
D. 60
22. Which battery is use for storing electrical energy
Nelson
Edicin
Lead Acid
None
23. Which convert Thermal Energy into Kinetic Energy

Rocket
24. Power plant the availability of power is least reliable
A. Wind
B. Solar
C. Tidal
D. Geothermal
E. Bio gass
25.
26. Which type of engine uses maximum air fuel ratio
A. Petrol engine
B. Gas engine
C. Diesel engine
D. Gas turbine
E. Hydro turbine
27. Solid grounding use for voltages
Above 11 KV
Below 20 KV
Above 33 KV
Below 660V
28. Glowing of electric discharge lamp is due to

a. Heating effect due to current
b. ionization of gas particles
29. RC snubber circuit is used to limit ........in its off state.
rise of current in SCR
rise of voltage in SCR
inductance
frequency
30. Which is not basic component of transformer
Corey
Primary Winding
Secondary Winding
Mutual Flux
31. Ideal Transformer has
Winding has no resistance
Core has no loss
Core has infinite permeability
All of above
32. Natural Uranium contain .U235.
Zero
0.1%
0.7%
05%
33. Transmission lines use three phase voltages and--------- alternating currents.
Single phase
Three phase
Two phase
Neutral phase
34. Submarine use which voltage
HVDC
35. Conecting all to same ground chance of getting shock is
Maximized
Minimized
Zero
Neglected
36. Voltage less then 10 volts are called
Dim voltage
Light voltage
Stray voltage
None
37. Circuit Element which sense and initiate trip when fault is detected
Circuit breaker
Fuse
Protective Relay
38. Two type of over-current relay one is instantaneous current protection relay other one is
Variable over current
Time over current
Constant over current
Delay feedback current
39. Which of the following is not a purpose of disturbances monitoring equipment?
Model validation
Disturbance investigation
Incorrect protection settling
Assessment of system protection
40. The principal of ..........can be used to analyze fault in power system network.
a. Thevnin Theorem
b. Norton
c. Superposition
d. Jordan
41. Product of RMS value of current and voltage
Active power
Reactive
Apparent Power
Vanished Power
42. Actual power dissipated in resistor
Active power
Reactive Power
Apparent Power
Vanished Power
43. Inductive reactance
Active power
Reactive Power
Apparent Power
Vanished Power
44. Power factor is reciprocal to

Q factor
45. Optical power depends...........associated with the optical fibre receiver.
A.quantum
B.dark current
C.thermal
D.all
46. RLC resonance which is maximum
Power Dissipation
Inductive power
Capacitive power
None
47. Due to velocity saturation, MOSFET reaches saturation
a. Before Pinch off
b. After pinch off
c. At Q point
d. Before Q point
e. After Q point
48. Hfe is..
A. BAc
B. BDC
C. Re
Rb
49. The channel of a JFET is between the
A. Gate and drain
B. Drain and source
C. Gate and source
D. Input and output
50. S
51. Region of operation of transistor is . If emitter junction is forward biased and collector
junction is reverse.
Active
Saturation
Inversion
None of these
52. FET use for.
53. Drawback of FET.
54. VCE voltage of transistor is very important in checking weather transistor is
Saturation
Cut-off
Defective
All
55. Difference between D-MOSFET & FET.
56. DC operating point of an amplifier specified by voltage and current (Q-Point)
57. Oscillator frequency can be change by variable DC control voltage

.
,,,..
Voltage control oscillator
58.
59. RLC at low frequency is larger because
XC is larger
XL is larger
XC is smaller
XL is smaller
60. Output known as dependent variable
61. For rectification we use diode
62. CMMR
63. Diode limiter
64. BJT current amplification which is used Common Collector
65.
66. Part of construction which tell computer to perform operation
OPcode
Oncode
Instruction reigister
None
67. In 8085. Part of control unit
OPcode
Oncode
Instruction register
None
68. Instruction register is .nibble in 8085.
2
4
6
8
10
69. Which property of FIR is not required for FIR
Input
Output
Feedback
Impulse
70. FIR designed to achieve
Linear
Inverted
Non inverting
Both A and B
71. is use to convert continuous time signal to discrete time
.
Fourier transform
Fourier series
.
72.
73.
74.
75. S
76. S
77. Which of the following is true about discrete LTI system (PESCO)
a. Convolution sum is approximation to convolution integral
b. Convolution integral is approximation to convolution sum
c. Convolution sum and convolution integral are explicit realization
d. All
78. Ztransform and ROC
79. ROc
80.
81.
82.
83.

Fesco

Uploaded by

Copyright:

Available Formats

Fesco

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Fesco

Uploaded by

Copyright:

Available Formats

1.

13. Three main component of circuit are Resistance, Inductacne and

28. Glowing of electric discharge lamp is due to

You might also like