Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

Sikament LN - Pds en PDF

Download as pdf or txt
Download as pdf or txt
You are on page 1of 3

PRODUCT DATA SHEET

Sikament LN
HIGH RANGE WATER REDUCING

DESCRIPTION CHARACTERISTICS / ADVANTAGES


A highly effective water reducing agent and superplas- Sikament LN provides the following properties :
ticizer for promoting accelerated hardening with high Up to 20 % reduction of water will produce 40 % in-
workability. Complies with A.S.T.M. C 494-92 Type F. crease in 28 days compressive strength.
Increased watertightness.
USES
Sikament LN is a high range water reducing concrete
admixture specially formulated for the precast con-
crete element industry; to meet the demand of early
removal of formwork due to the early strength gain.
Enables concrete placing equipment to be used to its
full capacity. Effective throughout dosage range.

PRODUCT INFORMATION
Chemical base Modified Naphthalene Formaldehyde Sulfonate
Packaging 240 kg drum
Bulk delivery
Appearance / Colour Liquid / Dark brown
Shelf life 12 months from date of production if stored properly in undamaged un-
opened, original sealed container.
Storage conditions Store in dry conditions at temperatures between +5 C and +30 C. Protect
from direct sunlight and frost.
Density at +20 C 1.22 0.01 kg/L

TECHNICAL INFORMATION
Concreting Guidance The standard rules of good concreting practice, concerning production and
placing, are to be followed.
Laboratory trials before concreting on site are strongly recommended
when using a new mix design or producing new concrete components.
Fresh concrete must be cured properly and as early as possible.

Product Data Sheet


Sikament LN
November 2016, Version 01.01
021302011000000116

1/3
APPLICATION INFORMATION
Recommended Dosage Sikament LN can be used at the dose rate 0.30 % - 2.0 % by total weight of
cementitious material depending on requirements concerning workability
and strength.
It is recommended that trial mixes be conducted to determine the exact
dosage rate required.
Note :
Typical dosage rate for use with silica sand is 0.30 % - 1.20 % by weight of
cementitious material.
Typical dosage rate for use with combination of manufactured sand / vol-
canic sand is 0.4 % - 2.0 % by weight of cementitious material.
For more specific requirements, advice is available from our Technical Ser-
vice Department to determine the usage rate for optimum results.
Compatibility Sikament LN may be combined with the following products:
Plastiment P121R
Plastiment VZ
Sika Fume
SikaFibre
Do not use sikament series combined with viscocrete / viscoflow series.
To produce flowing and / or self-compacting concrete, special concrete mix
design is required.
Pre-trials are recommended and mandatory if combinations with the above
products are required.
Please consult to our Technical Service Department.

APPLICATION INSTRUCTIONS LOCAL RESTRICTIONS


DISPENSING Please note that as a result of specific local regula-
tions the declared data and recommended uses for
Sikament LN can be added to the gauging water prior this product may vary from country to country. Please
to its addition to the dry aggregates or separately to consult the local Product Data Sheet for the exact
the freshly mixed concrete (on the batching plant or product data and uses.
on site into the truck mixer) where added to truck mix-
er on site, further mixing for three to five minutes ECOLOGY, HEALTH AND SAFETY
should be carried out.
For information and advice on the safe handling, stor-
BASIS OF PRODUCT DATA age and disposal of chemical products, users shall refer
to the most recent Safety Data Sheet (SDS) containing
All technical data stated in this Data Sheet are based physical, ecological, toxicological and other safety-re-
on laboratory tests. Actual measured data may vary lated data.
due to circumstances beyond our control.

Product Data Sheet


Sikament LN
November 2016, Version 01.01
021302011000000116

2/3
LEGAL NOTES
The information, and, in particular, the recommenda-
tions relating to the application and end-use of Sika
products, are given in good faith based on Sika's cur-
rent knowledge and experience of the products when
properly stored, handled and applied under normal
conditions in accordance with Sika's recommenda-
tions. In practice, the differences in materials, sub-
strates and actual site conditions are such that no war-
ranty in respect of merchantability or of fitness for a
particular purpose, nor any liability arising out of any
legal relationship whatsoever, can be inferred either
from this information, or from any written recom-
mendations, or from any other advice offered. The
user of the product must test the products suitability
for the intended application and purpose. Sika re-
serves the right to change the properties of its
products. The proprietary rights of third parties must
be observed. All orders are accepted subject to our
current terms of sale and delivery. Users must always
refer to the most recent issue of the local Product Data
Sheet for the product concerned, copies of which will
be supplied on request.

PT. Sika Indonesia


Jl. Raya Cibinong-Bekasi km.20.
Cileungsi, Bogor 16820 - Indonesia
Tel. +62 21 8230025
Fax. +62 21 8230026
Website: idn.sika.com
email: sikacare@id.sika.com

SikamentLN_en_ID_(11-2016)_1_1.pdf

Product Data Sheet


Sikament LN
November 2016, Version 01.01
021302011000000116

3/3

You might also like