Philippine Green Building Code

THE PHILIPPINE
GREEN BUILDING CODE

June 2015
A Referral Code
of the
NATIONAL BUILDING CODE OF THE PHILIPPINES
(P.D. 1096)
Message
My warmest greetings to the Department of

Public Works and Highways on the
implementation of the Philippine Green Building
Code of 2016.
Today is an historic moment as the government,

through the DPWH, implements the Green
Building Code, or the GB Code. This manual will
be one of our enduring legacies to succeeding
generations and the fulfillment of our duty to
secure their rights, welfare, and protection. I am
filled with pride that the country is now part of the
global movement towards ecological
conscientiousness and sustainability.
I am confident that the ideas contained in this document will help ensure that all
structures built from here on will have minimal impact on our environment, complying
with various standards of quality and efficiency, and fulfilling criteria that allow
occupants to lead meaningful lives.
Indeed, a new era has dawned over our nation. Informed by the lessons of the past, and
mindful of the needs of the future, building better is not just an option but an
indispensable part of our efforts towards achieving real, lasting progress. Through the
observance of the principles and guidelines laid down in the GB Code, we will create a
Philippines that we can be proud to bequeath to the next generation.
BENIGNO S. AQUINO III

President of the Philippines
Foreword
In recent years, countries in the Asia-Pacific region
started to adopt measures that promote resource
management efficiency and site sustainability while
minimizing the effects of buildings on human health
and environment by practicing Green Building.
The time has come for the Philippines to champion

the implementation of greener measures to address
climate change. With the Department of Public
Works and Highways partnership with International
Finance Corporation of the World Bank group, the
clamor for sustainable building regulations has been
answered.
The Philippine Green Building Code, a referral code to the National Building Code of the
Philippines, rallies to lessen the impacts of buildings to health and environment through
resource management efficiency.
A gamut of minimum standards aimed to reduce greenhouse emissions and introduce

electricity and cost savings for buildings is imposed to applicable building falling under
certain gross floor area to deliver improved energy efficiency, water and wastewater
management, materials sustainability, solid waste management, site sustainability and
indoor environmental quality.
With the implementation of this Code and the promise of reducing greenhouse gas
emissions and energy and water consumption by at least 20%, DPWH will herald the
achievement of the Philippine Governments commitment to reduce carbon emissions
by 70% in 2030.
We took the first steps in engineering this Code with the help of professional
associations and stakeholders to answer the call for a sustainable building regulation.
We now call upon our stakeholders, end-users, customers and other relevant parties
to lend your hands to us as, together, we achieve an environmentally sound Philippines.
ROGELIO L. SINGSON
Secretary
22nd J
une
TABLE OF CONTENTS
Chapter I. GENERAL PROVISIONS 1

Section 1. Title 1
Section 2. Policy 1
Section 3. Objectives 1
Section 4. Principles 1
Section 5. Definition of Terms 1
Section 6. Green Building Concept 2
Section 7. Approach 2
Section 8. Building Use / Occupancy Coverage and Application 2
Chapter II. GREEN BUILDING REQUIREMENTS 3
Section 9. Performance Standards 3
Section 10. Energy Efficiency 3
10.1 Building Envelope 3
10.1.1 Air Tightness and Moisture Protection 3
10.1.2 Glass Properties 4
10.1.3 Natural Ventilation 6
10.1.4 Building Envelope Color 7
10.1.5 Roof Insulation 8
10.2 Mechanical Systems 9
10.2.1 Air Conditioning System 9
10.2.2 Water Heating System 12
10.2.3 Variable Speed Drives and High Efficiency Motors 14
10.2.4 Enthalpy Recovery of Exhaust Air 16
10.3 Electrical Systems 16
10.3.1 Daylight Provision 16
10.3.2 Daylight Controlled Lighting System 17
10.3.3 Lighting Power Density 18
10.3.4 Occupancy Sensors for Lighting Control 19
10.3.5 Elevators and Escalators / Moving Ramps / Walkways 19
10.3.6 Transformer 21
10.3.7 Overhead or Elevated Water Storage 21
Section 11. Water Efficiency 22
11.1 Water Fixtures 22
11.2 Water Management 23
11.2.1 Rainwater Harvesting 23
11.2.2 Water Recycling 23
Section 12. Material Sustainability 24
12.1 Non-Toxic Materials 24
Section 13. Solid Waste Management 26
13.1 Material Recovery Facility 26
Section 14. Site Sustainability 27
14.1 Site / Ground Preparation and Earthworks 27
14.2 Open Space Utilization 27
Section 15. Indoor Environmental Quality 28
15.1 Minimum Fresh Air Rates 28
15.2 Designated Smoking Area 30
Chapter III. INSTITUTIONAL ARRANGEMENTS 31
Section 16. Office of the National Building Official 31
Section 17. Technical Staff 31
Section 18. Professional and Technical Assistance 32
Chapter IV. CERTIFICATION PROCESS 33
Section 19. Green Building Permit Process 33
Chapter V. FINAL PROVISIONS 33
Section 21. Separability Clause 33
Section 22. Effectivity 33
Section 23. Transitory Provision 33
Annex 1 Definition Of Terms

Annex 2 Glass Library
Annex 3 Insulating Values Of Common Building Materials
Table 1. Minimum TGFA for Building Use / Occupancy

Table 2. SHGC and VLT for different WWR
Table 3. Correction factor for each horizontal overhang shading projection
Table 4. Correction factor for each vertical fin shading projection
Table 5. Solar Reflectance Index Values Of Basic Colored Coatings
Table 6. R-Value of Common Roof Insulation
Table 7. Electrically Operated Unitary Air Conditioners and Condensing Units
Table 8. Water Chiller Packages Minimum Efficiency Requirements
Table 9. Minimum Performance Requirements for Water Heating Equipment
Table 10. Motor Efficiencies
Table 11. Maximum Allowed LPD
Table 13 Water Fixture Performance Requirements
Table 14. VOC Limits
Table 15. MRF Minimum Daily Storage Space Requirements
Table 16. Minimum Ventilation Rates in Breathing Zone
Figure 1. Schematic representation of a window and related horizontal

overhang or vertical fin
THE PHILIPPINE GREEN BUILDING CODE ii

PHILIPPINE GREEN BUILDING CODE
A Referral Code of the
NATIONAL BUILDING CODE (P.D. 1096)
CHAPTER I. GENERAL PROVISIONS

Section 1. Title
This document shall be known as the Philippine Green Building Code hereinafter
referred to as the GB Code.
Section 2. Policy
The state shall protect and advance the right of the people to a balanced and healthful
ecology in accord with the rhythm and harmony of nature against harmful effects of
climate change. It shall safeguard the environment, property, public health, in the
interest of the common good and general welfare consistent with the principles of sound
environmental management and control; and for this purpose, prescribe acceptable set
of standards and requirements for relevant buildings to regulate their location, site,
planning, design, quality of material, construction, use, occupancy, operation and
maintenance.
Section 3. Objectives
The GB Code seeks to improve the efficiency of building performance through a
framework of acceptable set of standards that will enhance sound environmental and
resource management that will counter the harmful gases responsible for the adverse
effects of climate change, throughout the buildings life-cycle including efficient use of
resources, site selection, planning, design, construction, use, occupancy, operation and
maintenance, without significant increase in cost. This GB Code is a set of regulations
setting minimum standards for compliance and not intended to rate buildings.
Section 4. Principles
4.1 The technical professionals, developers, contractors, property managers and
building owners involved in the planning, design, construction and
management of buildings have the opportunity and responsibility to help
government address the adverse effects of climate change by ensuring that
buildings are planned, designed, constructed, operated and maintained to the
required efficiency level.
4.2 Resources must be used efficiently to equitably meet the developmental and
environmental needs of the present and future generations.
THE PHILIPPINE GREEN BUILDING CODE 1

4.3 Occupants of green buildings will benefit from improved indoor environmental
quality, which promotes higher productivity and better comfort.
Section 5. Definition of Terms

The words, terms and phrases as used in this GB Code shall have the meaning or
definition as indicated in the National Building Code (NBC) and Annex 1.
Section 6. Green Building Concept
Green building is the practice of adopting measures that promote resource
management efficiency and site sustainability while minimizing the negative impact of
buildings on human health and the environment. This practice complements the
conventional building design concerns of economy, durability, serviceability and
comfort.
Section 7. Approach
The GB Code adopts a staggered or incremental approach and is subject to periodic
review by the Secretary of the Department of Public Works and Highways (DPWH),
through the National Building Code Development Office (NBCDO), to modify or include
new aspects and emerging efficient technologies and expand the coverage to other
building use / occupancy or replace outmoded measures.
Section 8. Building Use / Occupancy Coverage and Application

8.1 The provisions of the GB Code shall apply to all new construction and/or with
alteration of buildings in the following classification with the required
minimum Total Gross Floor Areas (TGFA) as indicated in Table 1 below:
Table 1. Minimum TGFA for Building Use / Occupancy
USE / OCCUPANCY CLASSIFICATION TGFA
of any jurisdiction as defined by NBC
Residential Dwelling: Condominium 1 20,000 sqm
Hotel / Resort 10,000 sqm
Educational: School 10,000 sqm
Institutional: Hospital 10,000 sqm
Business: Office 10,000 sqm
Mercantile: Mall 15,000 sqm
Mixed Occupancy 2
10,000 sqm
Sources: NBC, Baseline Studies, IFC Philippine Green Building Code Project, May 2013
1
For Residential Dwelling: Condominium, the TGFA is the sum of the dwelling areas, common and
accessory areas within the building.
2
The areas for Mixed Occupancy classification shall have a total aggregate area equal to the TGFA
8.2 GB Code does not apply to existing buildings of the above use / occupancy
classification constructed before the effectivity of the GB Code.

8.3 When alterations, additions, conversions and renovations of existing
buildings constructed after the effectivity of the GB code, which reached the
TGFA as indicated in Table 1 are to be made, the whole building shall be
subject to the applicable provisions of the GB Code.
8.4 A building of mixed occupancy with combination of classification as indicated
in Table 1, shall use appropriate measures applicable to each classification.
CHAPTER II. GREEN BUILDING REQUIREMENTS
Section 9. Performance Standards
The GB Code shall be subject to the following performance standards:
9.1 Energy Efficiency
9.2 Water Efficiency
9.3 Material Sustainability
9.4 Solid Waste Management
9.5 Site Sustainability
9.6 Indoor Environmental Quality
Section 10. Energy Efficiency

Energy efficiency requires the adoption of efficient practices, designs, methods and
technologies that reduce energy consumption resulting in cost savings.
10.1 BUILDING ENVELOPE
10.1.1 Air Tightness and Moisture Protection
a. General
As the humidity levels are very high in the Philippines, the unwanted
infiltration and humidity ingress into the spaces can cause additional
load on the air conditioning system and a detrimental impact on air
quality. Buildings must be planned and designed with specific details
to ensure that air tightness is maximized. Details should precisely
include joints, service entry points, windows and doors. The
implementation of these measures requires only increased attention to
the construction details and it can be implemented at practically no
cost.
b. Applicability
This measure applies to all building occupancies as indicated in Table
1.
c. Requirements
Buildings shall be planned and designed with:
i. Complete gaskets, weather-stripping, door bottom sweeps and
seals within and around window and door assemblies

ii. Moisture protection on the surface of the external faade to reduce
vapor or moisture migration from external spaces
d. Exceptions
Buildings and spaces without provisions for air conditioning systems
are exempt.
10.1.2 Glass Properties
a. General
Compared to wall assemblies, glazing transfers more heat and hence,
it is ideal to reduce the amount of glazing with respect to the wall in
order to reduce internal heat gains.
The requirement of Window to Wall Ratio (WWR) needs to be
balanced with the amount of daylight coming through the glazed area.
Solar Heat Gain Coefficient (SHGC) is used to determine the amount
of solar heat admitted through the glass divided by the total solar
radiation incident on the glass.
Visible light Transmittance (VLT) is used to determine the amount of
light transmitted through the glass.
b. Applicability
1.
c. Requirements
WWR shall be balanced with SHGC to maintain flexibility in design. To
further describe, the higher the designed building WWR, the lower the
required SHGC in glass windows shall be and vise-versa. This does
not however, remove the option for building owners to apply windows
with low SHGC for building with low WWR.
i. The size of the opening (with or without glass) shall be in accordance
with the NBC.
For each WWR value, the SHGC and VLT shall be in accordance with
Table 2.
Table 2. SHGC and VLT for different WWR
Maximum Minimum
WWR
SHGC VLT
10 0.80 0.80
20 0.70 0.70
30 0.60 0.70
40 0.45 0.60

50 0.44 0.55
60 0.37 0.50
70 0.31 0.45
80 0.27 0.40
90 0.24 0.35
Source: Prescribed Requirements, IFC Philippine Green Building Code Project, May 2013
The SHGC requirement in Table 2 can be adjusted if sun breakers are

provided in the windows. Sun breaker plays a very important role in
reducing solar heat gain as it stops the solar radiation before it enters
the building and doing so reduces the cooling loads considerably.
External shading has the additional positive effect of improving the
internal comfort cutting part of the direct radiation on occupants. This
must be applied only to windows that are shaded.
SHGC limits can be adjusted by multiplying it with the correction
factors summarized in the following tables, using the formula:
SHGCadj = f x SHGC
where:
SHGCadj is the adjusted solar heat gain coefficient limit for
windows with external shading
SHGC is the solar heat gain coefficient
f is the SHGC correction factor for the external shading
ii. For intermediate values of D/H or D/W the lower figure of correction
factor should be used as stated in Tables 3 and 4.
iii. D is the depth of the shading device as projected from the building
exterior wall and H or W is the height or distance of the bottom sill of
the window from the bottom of the shading device as shown in Figure
1.
iv. Shading which is not attached to windows or placed on a wall with no
window should not be counted.
Figure 1. Schematic representation of a window and related horizontal

overhang or vertical fin

Table 3. Correction factor for each horizontal overhang shading projection
Correction
D/H
Factor
0.1 1.03
0.5 1.06
1 1.08
Table 4. Correction factor for each vertical fin shading projection
Correction
D/W
Factor
0.1 1.04
0.5 1.12
1 1.17
For glass products, see Annex 2 Glass Library.
d. Exceptions
There are no exceptions to this provision.
10.2 NATURAL VENTILATION
a. General
This measure will give building occupants the flexibility and opportunity
to use natural ventilation for free cooling and fresh air in regularly
occupied spaces. This measure will limit the tendency to create glass-
sealed box type buildings. Size of each room and space shall be
consistent with the occupancy load of the NBC.
b. Applicability
1.
c. Requirements
i. Operable windows or balcony door shall be provided in regularly occupied

spaces. The size of the opening shall be equal to at least ten percent
(10%) of the floor area of regularly occupied spaces.
ii. All operable windows shall be provided with safety features for protection
against strong winds, water penetration and protection for building
occupants including child safety and security.

c. Exceptions
10.3 BUILDING ENVELOPE COLOR
a. General
Light-colored building envelope, especially the roof areas which are
the most vulnerable, can reduce heat transfer from the outside to the
inside of the building by having surfaces with high Solar Reflectance
Index (SRI).
b. Applicability
1.
c. Requirements
i.
METAL SURFACE SRI
Reflective white 86 to 92
Basic white 80 to 88
Beige / Tan 74 to 80
Dark brown 0 to 33
Light to medium brown 45 to 56
Building metal roof surfaces shall either

be colored white or have a minimum SRI of 70. See Table 5.
Table 5. Solar Reflectance Index Values Of Basic Colored Coatings

Light to medium grey 39 to 63
Dark grey 0 to 41
Blue 23 to 30
Light to medium blue 35 to 38
Red 28 to 36
Terracotta red 38 to 40
Green 25 to 32
Light to medium green 30 to 48
Source: PPG Cool Color Series - www.coolcolorsdatabase.ppg.com

as rated by the Cool Roof Rating Council, US
d. Exceptions. There are no exceptions to this provision.

10.4 ROOF INSULATION
a. General
Insulation can help reduce heat gain in a building thus improving
thermal comfort, acoustic quality and reducing the load on the air
conditioning system.
b. Applicability
1.
c. Requirements
Buildings shall be provided with roof insulation so that the average
thermal resistance value (R-Value) of the roof is at least R-8. See
Annex 4 (Insulation R-Value).
For Insulating Values of Common Building Materials see Annex 3
Table 6. R-Value of Common Roof Insulation

INSULATION R-Value / inch (25.4 mm)
Polyisocyanurate 5.6 to 8.0
Polyurethane 5.6 to 6.5
Closed cell spray foam 5.5 to 6.0
Phenolic foam 4.8
Urea formaldehyde foam 4.6
Plastic fiber 4.3
Mineral fiber 4.2 to 4.5
Cementitious foam 3.9
Polystyrene 3.8 to 5.0
Fiberglass 3.7
Rockwool 3.7
Rigid foam 3.6 to 6.7
Cellulose 3.6 to 3.8
Open cell spray foam 3.6
Sheeps wool 3.5
Hemp 3.5
Cotton 3.4
Loose cellulose 3.0 to 3.7
Mineral wool 2.8 to 3.7
Straw 2.4 to 3.0
Vermiculite / Perlite 2.4
Reflective bubble foil 1 to 1.1
Source: U.S. Department of Energy Insulation Materials

d. Exceptions. There are no exceptions to this provision.
10.5 MECHANICAL SYSTEMS
10.5.1 Air Conditioning System
a. General
Air conditioning typically accounts for more than fifty percent (50%) of
total electricity costs in a centrally air conditioned building. Hence, the
efficiency of an air conditioning system is of prime importance. The
heart of the air conditioning system is the cooling system, typically
chillers in large buildings and is important to procure an efficient
cooling system.
b. Applicability
1.
c. Requirements
The cooling equipment shall meet or exceed the minimum efficiency
requirements as indicated in Tables 7 and 8.

Table 7. Electrically Operated Unitary Air Conditioners and Condensing Units
Size Category Sub-Category

Equipment Minimum Test
or Rating
Type (in Btu/h) (in kJ/h) Efficiency Procedure
Conditions
14.0 SEER
Split systems AHRI 210/240;
Air conditioners, 12.0 EER PNS ISO
<65,000 <68,585 5151:2014;
air-cooled 14.0 SEER
Single packaged PNS ISO 16358-1
11.6 EER
Split systems 12.0 SEER AHRI 210/240;
Through-the- PNS ISO
<30,000 <31,655 5151:2014;
wall, air-cooled Single packaged 12.0 SEER PNS ISO 16358-1
Small-duct high AHRI 210/240;

PNS ISO
velocity, <65,000 <68,585 Split systems 10.0 SEER 5151:2014;
air-cooled PNS ISO 16358-1
65, 000 & 68, 585 & 11.5 EER

<135,000 <142,447 11.3 EER
135, 000 & 142, 447 11.5 EER
AHRI 340/360;
Air conditioners, <240,000 <253,238 Split systems and 11.3 EER PNS ISO
air-cooled single packaged 5151:2014; PNS
240, 000 & 253, 238 & 10.0 EER ISO 16358-1
<760,000 <801,922 9.8 EER
9.7 EER
760, 000 801, 922
9.5 EER
AHRI 210/240;
PNS ISO
14.0 EER 5151:2014; PNS
<65,000 <68,585 ISO 16358-1
Air conditioners, 14.0 EER

water 65, 000 & 68, 585 &
Split systems and 13.8 EER
and 135,000 142,447
single packaged AHRI 340/360;
evaporative 135, 000 & 142,447 & 13.8 EER PNS ISO
cooled 5151:2014; PNS
240,000 253,238 13.8 EER ISO 16358-1
14.0 EER
240,000 253,238
13.8 EER
Source: 2010 PSVARE Standards

Table 8. Water Chiller Packages Minimum Efficiency Requirements
Minimum Efficiency Test

Equipment Type Size category
Procedures
Full Load
Air-cooled chillers with, < 150 tons EER 10
condenser, electrically AHRI 550/590
operated 150 tons EER 10
Air-cooled chillers Condenserless units
without condenser, All capacities EER shall be rated with AHRI 550/590
electrically operated matched condensers
Reciprocating units
required to comply with
Water-cooled, electrically
All capacities Kw/ton water-cooled positive AHRI 550/590
operated, positive
displacement
requirements
< 75 tons Kw/ton 0.78
75 tons and <
Water-cooled, Electrically Kw/ton 0.775
150 tons
operated, positive AHRI 550/590
150 tons and
displacement Kw/ton 0.68
< 300 tons
300 tons Kw/ton 0.62
< 150 tons Kw/ton 0.634
150 tons and
Kw/ton 0.634
Water-cooled electrically < 300 tons
AHRI 550/590
operated, centrifugal 300 tons and
Kw/ton 0.576
< 600 tons
600 tons Kw/ton 0.57
Air-cooled absorption
All capacities COP 0.6
single effect
Water-cooled absorption
All capacities COP 0.6
single effect
AHRI 560
Absorption double effect
All capacities COP 1
indirect-fired
All capacities COP 1
d. Exceptions
Buildings with no air-conditioning systems are exempt.

10.5.2 Water Heating System
a. General
The use of energy-efficient water heating systems in buildings, by
observing minimum power performance requirements, will help reduce
energy consumption due to heating of water.
b. Applicability
1.
c. Requirements. Applicable buildings shall comply with the minimum

performance requirements for water heating in the 2010 PSVARE
Standards, as shown in Table 9.
d. Exceptions
Buildings with no water heating systems and buildings with using solar
water heating and/or heat pump for water heating are exempt.

Table 9. Minimum Performance Requirements for Water Heating Equipment
Subcategory or Rating
Equipment Size Category (Input) Performance Required
Condition Test Procedure
Type
I-P SI I-P SI I-P SI
Resistance EF 0.97 - EF 0.97 - DOE 10 CFR
12 kW 12 kW Res 76 L
20 gal 0.00132V 0.00132V Part 430
Electric Water Resistance SL 20 +
> 12 kW > 12 kW Res 76 L ANSI Z21.10.3
Heaters 20 gal 35V, Btu/h
DOE 10 CFR
All sizes All sizes Heat Pump Heat Pump EF 2.0 EF 2.0
Part 430
DOE 10 CFR
75,000 Btu/h 22 kW 20 gal 76 L EF 0.67 EF 0.67
Part 430
Gas Storage
Water Heaters E 80% and
< 4,000
> 75,000 Btu/h > 22 kW < 0.31 kw/L SL (Q/800 + ANSI Z21.10.3
(Btu/h)/gal
110V), Btu/h
> 50,000 Btu/h 4,000
> 15 kW and < 0.31 kw/L DOE 10 CFR
and < 200,000 (Btu/h)/gal and EF 0.82 EF 0.82
58kW and 7.57 L Part 430
Btu/h < 2 gal
Gas 4,000
200,000 0.31 kw/L
Instantaneous 58 kW (Btu/h)/gal and E 80% E 80%
Btu/h and 37.85 L
Water Heaters < 10 gal
ANSI Z21.10.3
4000 E 80% and
200,000 0.31 kw/L
58 kW (Btu/h)/gal and SL (Q/800 +
Btu/h and 37.85 L
10 gal 110V), Btu/h
105,000 EF 0.59 - EF 0.59 - DOE 10 CFR
31 kW 20 gal 76 L
Btu/h 0.0019V 0.0019V Part 430
Oil Storage
Water Heaters E 78% and
> 105,000 < 4,000
>31 kW < 0.31 kw/L SL (Q/800 +
Btu/h (Btu/h)/gal
110V), Btu/h DOE 10 CFR
4,000 Part 430
210,000 0.31 kw/L EF 0.59 - EF 0.59 -
62 kW (Btu/h)/gal and
Btu/h and <7.87 L 0.0019V 0.0019V
< 2 gal
Oil 4,000
> 210,000 0.31 kw/L
Instantaneous > 62 kW (Btu/h)/gal and E 80% E 80%
Btu/h and <37.85 L
Water Heaters < 10 gal
ANSI Z21.10.3
4,000 E 78% and
> 210,000 0.31 kw/L
> 62 kW (Btu/h)/gal and SL (Q/800 +
Btu/h and 37.85 L
10 gal 110V), Btu/h
300,000 Btu/h
Hot-water 4,000
and < 88 kW and < 0.31 kw/L
supply boilers, (Btu/h)/gal and E 80% E 80%
12,500,000 3664 kW and <37.85 L
gas and oil < 10 gal
Btu/h
Hot-water 4,000 E 80% and
0.31 kw/L ANSI Z21.10.3
supply boilers, (Btu/h)/gal and SL (Q/800 +
and 37.85 L
gas 10 gal 110V), Btu/h
Hot-water 4,000 E 78% and
0.31 kw/L
supply boilers, (Btu/h)/gal and SL (Q/800 +
and 37.85 L
oil 10 gal 110V), Btu/h
Pool heaters
All sizes All sizes E 78% E 78% ASHRAE 146
oil and gas
Heat pump
All sizes All sizes 4.0 COP 4.0 COP ASHRAE 146
pool heaters
Unfired
All sizes All sizes R-12.5 R-12.5 none
storage tanks

10.5.3. Variable Speed Drives and High Efficiency Motors
a. General
Variable Speed Drive (VSD) describes the equipment used to control
the speed of machinery by changing the frequency of the motor that is
being operated. Where process conditions demand adjustment of flow
from a pump or fan, varying the speed of the drive may save energy
compared with other techniques for flow control.
b. Applicability
1.
c. Requirements
i. All motors for mechanical equipment over five (5) kW shall be

provided with variable speed drive and high efficiency motors in
accordance with Table 10.
ii. All motors of cooling towers shall be provided with variable speed
drive and high efficiency motors.
iii. All motors for domestic pumps shall have high efficiency motors as
indicated in Table 10.
d. Exceptions
Kitchen ventilation fans are exempt from this requirement. Non-
centralized air-conditioning systems in buildings are not required to
employ variable speed controllers.

Table 10. Motor Efficiencies
Number of Poles
=====> 2 4 6 2 4 6
Synchronous Speed
3600 1800 1200 3600 1800 1200
(RPM) =====>
Motor Horsepower
IP SI Open Motors Enclosed Motors
(HP) (kW)
1 0.75 77.0 85.5 82.5 77.0 85.5 82.5
1.5 1.10 84.0 86.5 86.5 84.0 86.5 87.5
2 1.50 85.5 86.5 87.5 85.5 86.5 88.5
3 2.20 85.5 89.5 88.5 86.5 89.5 89.5
5 4.00 86.5 89.5 89.5 88.5 89.5 89.5
7.5 5.50 88.5 91.0 90.2 89.5 91.7 91.0
10 7.50 89.5 91.7 91.7 90.2 91.7 91.0
15 11.00 90.2 93.0 91.7 91.0 92.4 91.7
20 15.00 91.0 93.0 92.4 91.0 93.0 91.7
25 18.50 91.7 93.6 93.0 91.7 93.6 93.0
30 22.00 91.7 94.1 93.6 91.7 93.6 93.0
40 30.00 92.4 94.1 94.1 92.4 94.1 94.1
50 37.00 92.0 94.5 94.1 93.0 94.5 94.1
60 45.00 93.6 95.0 94.5 93.6 95.0 94.5
75 55.00 93.6 95.0 94.5 93.6 95.4 94.5
100 75.00 93.6 95.4 95.0 94.1 95.4 95.0
125 90.00 94.1 95.4 95.0 95.0 95.4 95.0
150 110.00 94.1 95.8 95.4 95.0 95.8 95.8
200 150.00 95.0 95.8 95.4 95.4 96.2 95.8
250 185.00 95.0 95.8 95.4 95.8 95.6 95.8
300 225.00 95.4 95.8 95.4 95.8 96.2 95.8
350 260.00 95.4 95.8 95.4 95.8 96.2 95.8
400 300.00 95.8 95.8 95.8 95.8 96.2 95.8
450 335.00 95.8 96.2 96.2 95.8 96.2 95.8
500 375.00 95.8 96.2 96.2 95.8 96.2 95.8

10.5.4. Enthalpy Recovery of Exhaust Air
a. General
When buildings have outside air or fresh air supply and extract system
through mechanical means, using heat exchangers can use the air
extracted from the building areas to pre-condition the incoming
outdoor air. This process exploits the fact that the extract air is usually
already conditioned and therefore colder and drier.
b. Applicability
1.
c. Requirements.
All buildings with centralized air supply system shall use enthalpy
recovery wheels with efficiency of at least sixty percent (60%) of ninety
percent (90%) exhaust air.
d. Exceptions.
Buildings without centralized cooling systems are exempt.
10.6 ELECTRICAL SYSTEMS
10.6.1 Daylight Provision
a. General
Building should be planned and designed to maximize the use of
natural light so to reduce the use of artificial illumination.
b. Applicability.
1. For residential condominiums, it does not apply to individual
dwelling units.
c. Requirements.
All regularly occupied spaces inside the building shall have a view of
any combination of the following features that can allow daylight into
the room space:
i. Window
ii. Light shelf
iii. Clerestory
iv. Skylight
v. Light monitor / light scoop
vi. Other devices that can allow daylight inside

d. Exceptions
Spaces where daylight access hinders its intended function are
exempt from this provision with justification for exemption.
10.6.2 Daylight Controlled Lighting System
a. General
Building interior perimeter zones exposed to daylight generally do not
require artificial lighting during the day. However, sub-optimal design
and operation of the building results in use of artificial lighting when
not required.
Photoelectric sensors connected to luminaires help in dimming or

switching off lamps that do not require to be operated due to presence
of adequate daylight.
b. Applicability
This measure applies to all building occupancies as stated in Table 1.
For residential condominiums, this applies only to common indoor
areas with access to daylight.
c. Requirements
Applicable buildings shall comply with the following:
i. Lighting fixtures within the daylight zone shall be controlled with
photoelectric sensors with an auto on-off basis or continual dimming.
The photoelectric sensor shall be located approximately at half () the
depth of daylight zone.
ii. If occupancy sensors are installed in the daylight zone, the occupancy
sensor shall override the photoelectric sensor during non-occupancy
period.
d. Exceptions
Installed lighting fixtures within the day-lit zones are exempt from using
photoelectric sensor if this hinders its intended function, with justification for
exemption.

10.6.3 Lighting Power Density (LPD)
a. General
Limitation of LPD will help to design the lighting system in the most
efficient way and reduce the lighting and cooling load in the buildings. 3
The maximum allowed LPD for each space type is specified in Table
11.
3
The IIEE Manual on the Practice of Efficient Lighting System can be a
reference for the design of building lighting systems
b. Applicability
1.
c. Requirements
All applicable building types shall comply with the LPD limits in the
2010 PSVARE Standards, as shown in Table 11.
Table 11. Maximum Allowed LPD4
USE / OCCUPANCY Building Average LPD

CLASSIFICATION (W/m2)
Residential Dwelling: Condominium 10.8
Hotel / Resort 10.8
Educational: School 12.9
Institutional: Hospital 12.9
Business: Office 10.8
Mercantile: Mall 16.1 (excluding accent lighting)
Source 2010 PSVARE Standards
4
Above requirement excludes parking and exterior lighting (see Table 12)
Other Uses Average LPD (W/m2)

Covered parking 3.2
Open and outdoor parking 1.6
Exterior Faade 2.15
Active entrance
98.4
(pedestrian conveyance)
Inactive entrance
65.6
(normally locked / inactive use)
Source : ASHRAE - IESNA 90.1
d. Exceptions

10.6.4 Occupancy Sensors for Lighting Control
a. General
Occupancy sensors linked to lighting shall be installed in areas with
variable occupancy.
b. Applicability
1, except for hospitals and malls.
c. Requirements
i. In order to limit the use of electricity in unoccupied areas of

buildings, occupancy sensors linked to lighting (except for
emergency and security lighting) shall be installed in the following
areas with variable occupancy:
- corridors
- private offices
- storage rooms
- common toilets
- meeting rooms
- stairways
- other similar areas
ii. For covered car parks: minimum of sixty per cent (60%) of the
lighting must be controlled by the occupancy sensors.
d. Exceptions
Provisions for emergency and security lighting are exempted from this
requirement.
10.6.5 Elevators and Escalators / Moving Ramps / Walkways
a. General
Escalators / Moving Ramp / Walkway must be fitted with controls to
automatically reduce speed or stop when no traffic is detected.
Elevators must be fitted with mechanisms to reduce energy demand.
b. Applicability
1.

c. Requirements

i. Escalators / Moving Ramps / Walkways
Escalators / Moving Ramps / Walkways shall be fitted with
automated controls to reduce to a slower speed when no
activity has been detected for a maximum period of one and a
half (1-1/2) minutes and duration may be adjusted depending
on the demand.
The escalator / moving ramp / walkway shall automatically be
put on a standby mode when no activity has been detected for
a maximum period of five (5) minutes and duration may be
adjusted depending on the demand.
These escalators / moving ramps / walkways shall be designed
with energy efficient soft start technology. Activation of
reduced speed, power off and power on modes shall be done
through sensors installed in the top or bottom landing areas.
ii. Elevators
Elevators shall be provided with controls to reduce the energy
demand. To meet this requirement, the following features must
be incorporated:
- Use of Alternating Current (AC) Variable Voltage and
Variable Frequency (VVVF) drives on non-hydraulic
elevators
- Use of energy efficient lighting and display lighting in the
elevator car shall have an average lamp efficacy, across all
fittings in the car, of more than 55 lumens / watt
- Lighting shall switch off after the elevator has been inactive
for a maximum period of five (5) minutes
- The elevators shall operate in a stand-by condition during
off-peak periods
d. Exceptions

10.6.6 Transformer
a. General
The transformer shall be tested in accordance with relevant Philippine
National Standards (PNS) at test conditions of full load, free of
harmonics and at unity power factor.
b. Applicability
This measure applies to all building occupancies, with own
transformer, as indicated in Table 1.
c. Requirements
Transformers that are part of the building electrical system shall have
efficiencies not lower than 98% as prescribed in the DOE Guidelines
on Energy Conserving Design of Buildings.
d. Exceptions
10.6.7 Overhead or Elevated Water Storage
a. General
To reduce dependence on motorized systems to supply and distribute
potable or non-potable water within the building, thus help reduce
energy consumption, overhead or elevated water storage systems are
used, provided theres a twenty percent (20%) fire reserve over and
above the average daily demand supply. The system relies mostly on
elevation and gravity to distribute water within the building.
b. Applicability
1.
c. Requirements
Applicable buildings shall include in the water distribution system the
integration of overhead or elevated water tanks that will facilitate the
distribution of potable and / or non-potable water into the building
spaces, without compromising the required water volume and
pressure based on demand and the Plumbing Code of the Philippines.
d. Exceptions
Buildings below ten (10) storeys high are exempt from this provision.

Section 11. WATER EFFICIENCY
Water efficiency requires the adoption of efficient practices, plan, design, materials,
fixtures, equipment and methods that reduce water consumption resulting in cost
savings.
11.1 WATER FIXTURES
a. General
Efficient water fixtures include faucets, showerheads and water closets
that use less water in order to perform the same function of cleaning as
effectively as standard models. Water efficiency is an important aspect,
especially as fresh water resources start getting depleted at a rate faster
than they are replenished. Use of efficient plumbing fixtures, sensors,
auto control valves, aerators, flow control and pressure-reducing devices,
wherever possible, can result in significant reduction in water
consumption.
b. Applicability
This measure applies to all building occupancies as indicated in Table 1.
c. Requirements
Applicable buildings shall comply with the requirements as shown in
Table 13.
d. Exceptions.
Table 13 Water Fixture Performance Requirements
Type of Fixtures Maximum Flow Rate

Dual Flush 6 full
liters / flushing cycle
Water Closet 3 low
Single Flush
4.9 L0iters / flushing cycle
Water Closet
Shower 9 (80PSi) liters / min at 551.6 kPa
Urinals 1 liters / flushing cycle
Lavatory taps 4.8 (60PSi) liters / min at 417.7 kPa
Kitchen faucets 4.8 (60PSi) liters / min at 417.7 kPa
Handheld bidet sprays 4.8 (60PSi) liters / min at 417.7 kPa

11.2 WATER MANAGEMENT
11.2.1 Rainwater Harvesting
a. General
Rainwater is one of the purest sources of water available. Rainwater
from roofs and hardscape must be collected and reused for non-
potable purposes.
b. Applicability
1.
c. Requirements
i. Minimum storage tanks size (in cu.m) shall be calculated by dividing
the building footprint area by 75.
ii. Collected water shall be used for non-potable purposes such as
toilet flushing, irrigation and cooling towers.
d. Exceptions.
11.2.2 Water Recycling
a. General
Recycled water from Sewage Treatment Plants (STP) shall be reused
for non-potable purposes.
b. Applicability
1.
c. Requirements
The recycled water produced on site shall be reused for non-potable
purposes such as toilet flushing, irrigation and cooling towers, through
a distinct and separate piping system from the potable water supply
system.
d. Exceptions
Buildings with no dedicated STP are exempted from this requirement.

Section 12. MATERIAL SUSTAINABILITY
Material Sustainability governs all matters related to resource efficiency and material
selection and use with the least impact on the environment.
12.1 Non-Toxic Materials
a. General
Non-Toxic building materials refer to building materials without hazardous
or toxic chemicals that could cause Sick Building Syndrome (SBS) and
eventually lead to Building Related Illness (BRI).
b. Applicability
c. Requirements
i. Paints, coatings, adhesives and sealants used indoors or non-

ventilated areas shall not contain Volatile Organic Compounds
(VOC) or should be within levels tolerable to humans as specified in
Table 14.
ii. Composite wood shall not have urea formaldehyde content.
iii. All other materials containing chemicals used in construction shall not
compromise and be deleterious to the health and safety of the workers
and occupants of the building.
iv. Specifications shall comply with the allowable VOC limits as stated in
Table 14 with Material Safety Data Sheet (MSDS) from supplier and
other certification to justify the compliance of the material.
d. Exceptions

Table 14. VOC Limits
Maximum VOC Limit

Application / Product Type
(g/L less water)
Flat paint 50
Non-flat paint 150
Anti-rust paint 250
Lacquer (clear wood finish) 550
Sanding Sealer (clear wood finish) 350
Varnish (clear wood finish) 350
Floor coating 100
Shellac (clear) 730
Shellac (pigmented) 550
Stain 250
Faux Finish Coating 350
Architectural sealant 250
Non-membrane roof sealant 300
Single ply roof membrane 450
Waterproofing sealer 250
Waterproofing sealer (concrete / masonry) 400
All other sealers 200
Indoor adhesive 50
Wood flooring adhesive 100
Subfloor adhesive 50
Ceramic tile adhesive 65
Contact adhesive 80
Drywall panel adhesive 50
Multipurpose construction adhesive 70
Structural glazing adhesive 100
Special purpose contact adhesive 250
PVC welding 510
Concrete curing compound 350
Wood preservative 350
VOC levels are measured in grams of VOC per liter of material
Source: USGBC LEED Addenda # 100000419, 14 April 2010

Section 13. SOLID WASTE MANAGEMENT
Efficient waste management requires the adoption of efficient waste management
practices and use of eco-friendly materials.
13.1 Material Recovery Facility (MRF)
a. General
MRF shall be provided for the collection and segregation of solid waste
materials
b. Applicability
c. Requirements
i. Buildings shall be provided with a minimum area for MRF as specified in
Table 15.
ii. MRF shall be fully enclosed and easily accessible from within the building
and from the outside for easy collection of waste.
iii. Solid waste containers shall be provided for at least four (4) types of wastes:
- compostable (biodegradable)
- non-recyclable (to be disposed off in the landfill)
- recyclable (paper, cardboard, plastic, metal, wood, etc.)
- special waste
iv. For hospitals, isolated bins for hazardous wastes shall be provided to avoid
contamination.
d. Exceptions
Table 15. MRF Minimum Daily Storage Space Requirements
Use / Occupancy Requirement

Residential Dwelling:
1.0 sqm waste storage space per 2,500 sqm TGFA + 50% circulation space
Condominium
Hotel / Resort 1.0 sqm waste storage space per 2,500 sqm TGFA + 50% circulation space
Educational: School 1.0 sqm waste storage space per 300 sqm TGFA + 50% circulation space
Institutional: Hospital 1.0 sqm waste storage space per 1,250 sqm TGFA + 50% circulation space
Business: Office 1.0 sqm waste storage space per 1,400 sqm TGFA + 50% circulation space
Mercantile: Mall 1.0 sqm waste storage space per 400 sqm TGFA + 50% circulation space
Source: DENR (EMB Report on Solid Waste Generation) and NBC

Section 14. SITE SUSTAINABILITY
Site sustainability requires the adoption of planning, design, construction and operation
practices that minimize the adverse impact of buildings on ecosystems and water
resources.
14.1 Site / Ground Preparation and Earthworks
a. General
Site clearing, grading and excavation shall be planned at the start of
construction to mitigate pollution caused by erosion and sedimentation
taking into consideration existing endemic foliage as regulated by the
DENR.
All existing utilities and water bodies and waterways, shall be protected
and shall not be disturbed.
b. Applicability
c. Requirements
Measures for site protection shall be in place before the start of
construction.
i. Building site erosion and sedimentation control plan that outlines measures
to be applied to prevent soil that can run-off at the natural bodies of water,
causing water pollution.
ii. Additional measures to mitigate the effect of pollution and safety on

construction conforming to Rule XI of the NBC
iii. Storm water collection management plan
iv. Structures or facilities for storm water collection
d. Exceptions
14.2 Open Space Utilization
a. General
The inclusion of green areas or landscaped areas for indigenous or
adaptable species of grass, shrubs and trees will help in providing more
permeable surface for the building developments open space and thus
allow the re-charging of natural ground water reservoir, control storm
water surface run-off, cool the building surroundings, and provide indoor to
outdoor connectivity for the building occupants.

b. Applicability
c. Requirements
A minimum of fifty percent (50%) of the required Unpaved Surface Area
(USA), as required in Rule VII and VIII of the NBC, shall be vegetated with
indigenous and adaptable species.
d. Exceptions
Section 15. INDOOR ENVIRONMENTAL QUALITY

Indoor Environmental Quality requires the adoption of efficient design and operation
practices that take into consideration the building environment to improve occupant
health, productivity and safety.
15.1 Minimum Fresh Air Rates
a. General
The building indoor environment can contain more contaminants many
times over than the outside. Various studies have shown that indoor air
contaminants can cause health disorders, through symptoms of SBS and
BRI. The introduction and application of minimum fresh air rates will
maintain acceptable indoor air quality thru the constant replacement of
indoor air in buildings.
b. Applicability
This measure applies to all buildings occupancies as indicated in Table
1.
c. Requirements
Compliance to the minimum fresh air rates provided in the latest
Philippine Society of Ventilating, Air-Conditioning and Refrigerating
Engineers (PSVARE) Standards. See Table 16.
d. Exceptions

Table 16. Minimum Ventilation Rates in Breathing Zone
Max. Default
People Outdoor Air Rate Area Outdoor Air Rate Occupancy
Occupancy Category Density
(cmh / (people / 1,000
(cfm / person) (cfm / sqft) (cmh / sqm)
person) sqft {90 sqm})
Hotel / Resort and Residential Dwelling: Condominium
Bedroom / Living Room 5 8.5 0.06 0.1968 10
Lobbies / Pre-function 7.5 12.75 0.06 0.1968 30
Common Corridors - 0.06 0.1968 -
Multi-purpose Assembly 5 8.5 0.06 0.1968 120
Laundry Rooms, Central 5 8.5 -0.12 0.3936 10
Laundry Rooms within Dwelling Rooms 5 8.5 0.12 0.3936 10
Office Buildings
Office Spaces 5 8.5 0.06 0.1968 5
Reception areas 5 8.5 0.06 0.1968 30
Telephone / data entry 5 8.5 0.06 0.1968 60
Main Entry Lobbies 5 8.5 0.06 0.1968 10
Bank vaults / safe deposit 5 8.5 0.06 0.1968 5
Mercantile: Mall
Sales area 7.5 12.75 0.12 0.3936 15
Mall common areas 7.5 12.75 0.06 0.1968 40
Barbershop 7.5 12.75 0.06 0.1968 25
Beauty and Nail salons 20 34 0.12 0.3936 25
Pet shops (animal areas) 7.5 12.75 0.18 0.5904 10
Supermarket 7.5 12.75 0.06 0.1968 8
Laundries 7.5 12.75 0.06 0.1968 20
Photo Studios 5 8.5 0.12 0.3936 10
Pharmacy (prep area) 5 8.5 0.18 0.5904 10
Computer (not printing) 5 8.5 0.06 0.1968 4
Restaurant dining rooms 7.5 12.75 0.18 0.5904 70
Cafeteria / fast food dining 7.5 12.75 0.18 0.5904 100
Bars, cocktail lounges 7.5 12.75 0.18 0.5904 100
Educational: School
Day Care (through age 4) 10 17 0.18 0.5904 25
Classrooms (ages 5-8) 10 17 0.12 0.3936 25
Classrooms (ages 9 plus) 10 17 0.12 0.3936 35
Lecture classroom 7.5 12.75 0.06 0.1968 65
Lecture Hall (fixed seats) 7.5 12.75 0.06 0.1968 150
Art classroom 10 17 0.18 0.5904 20
Science laboratories 10 17 0.18 0.5904 25
Wood / metal shop 10 17 0.18 0.5904 20
Computer lab 10 17 0.12 0.3936 25
Media Center 10 17 0.12 0.3936 25
Music / theater / dance 10 17 0.06 0.1968 35
Multi-use assembly 7.5 12.75 0.06 0.1968 100
University / College Laboratories 10 17 0.18 0.5904 25
Sports Arena (play area) - 0.3 0.984 -
Gym, stadium (play area) - 0.3 0.984 -
Spectator area 7.5 12.75 0.06 0.1968 150
Swimming (pool & deck) - 0.48 1.5744 -

Max. Default
People Outdoor Air Rate Area Outdoor Air Rate Occupancy
Occupancy Category Density
(cmh / (people / 1,000
(cfm / person) (cfm / sqft) (cmh / sqm)
person) sqft {90 sqm})
General
Conference / meeting 5 8.5 0.06 0.1968 50
Corridors - 0.06 0.1968 -
Storage Rooms - 1.12 3.6736 -
Break room 5 8.5 0.06 0.1968 25
Coffee room 5 8.5 0.06 0.1968 20
Disco / dance floors 20 34 0.06 0.1968 100
Health club (aerobics room) 20 34 0.06 0.1968 40
Health club (weights room) 20 34 0.06 0.1968 10
Bowling gallery (seating) 10 17 0.12 0.3936 40
Gambling casino 7.5 12.75 0.18 0.5904 120
Game arcades 7.5 12.75 0.18 0.5904 20
Stages, Studios 10 17 0.06 0.1968 70
Public Assembly Spaces
Auditorium seating areas 5 8.5 0.06 0.1968 150
Places of religious worship 5 8.5 0.06 0.1968 120
Courtrooms 5 8.5 0.06 3.6736 70
Legislative chambers 5 8.5 0.06 0.1968 50
Libraries 5 8.5 0.12 0.1968 10
Lobbies 5 8.5 0.06 0.1968 150
Museums (children's) 7.5 12.75 0.12 0.1968 40
Museums / galleries 7.5 12.75 0.06 0.1968 40
15.2 Designated Smoking Area
a. General
Environmental Tobacco Smoke (ETS) is one of the leading causes of
respiratory illnesses in building occupants. RA 9211, the Tobacco
Regulations Act, restricts tobacco smoking in public spaces and the
prescription of designated smoking areas inside buildings.
b. Applicability
This measure applies to all buildings occupancies as indicated in Table
1.
c. Requirements
i. If smoking is banned within the building and property premises, NO
SMOKING signs in compliance with the RA 9514 (Fire Code of the
Philippines 2008), shall be posted in conspicuous areas of the building and
property premises to remind building occupants of the policy.

ii. If smoking is only allowed outdoors, designated smoking areas shall be
naturally ventilated, outside of the building shell and away from building
entrances, windows and outside supply air (OSA) intakes by at least ten (10)
meters.
iii. If smoking is allowed indoors, designated smoking areas shall be provided,

partitioned from the rest of the indoor areas. Partitions shall be from floor to
soffit of the next floor or roof structure. Enclosed smoking areas shall be
equipped with adequate exhaust system with exhaust rate in accordance
with the latest PSVARE Standards. Exhaust shall directly vent out to the
outside of the building and away from any building openings or air intakes.
iv. Doors and windows of enclosed smoking area shall always be closed and
well sealed. Negative pressure within is recommended to prevent smoke
infiltration to adjacent spaces.
d. Exceptions
Buildings with a general policy of no smoking within building premises
may be exempted from having designated smoking areas.
CHAPTER III. INSTITUTIONAL ARRANGEMENTS
Section 16. OFFICE OF THE NATIONAL BUILDING OFFICIAL

The Secretary of the Department of Public Works and Highways (DPWH), as the
concurrent National Building Official, pursuant to Section 203 of the NBC, through the
NBCDO, shall regularly review the GB Code not to exceed three (3) years from the date
of effectivity and every three (3) years thereafter.
For this purpose, the NBCDO shall convene the Technical Working Group (TWG) to
review and update the GB Code implementation vis--vis current and emerging trends
in the industry and make recommendations for reform.
The NBCDO shall serve as the center for the development and promotion of green
buildings in the Philippines. As such, it shall be the repository of resource materials
relating to green buildings. It shall also be responsible for developing modules and
providing green building training.
Section 17. TECHNICAL STAFF
The Secretary is hereby authorized to constitute and provide in his department a

professional staff composed of highly qualified architects, engineers and technicians

who possess diversified and professional experience in the field of green building
planning, design and construction.
Section 18. PROFESSIONAL AND TECHNICAL ASSISTANCE
The Executive Director of NBCDO shall chair the Technical Working Group (TWG) and
may make arrangements with the Secretary for compensation of the services of the
TWG. He may also engage and compensate within appropriations available thereof, the
services of such number of consultants, experts and advisers on full or part-time basis
as may be necessary coming from any concerned government agency or private
business, Accredited Professional Organizations (APO) and other associations to carry
out the provisions of the GB Code. The members are the duly authorized
representatives from the following:
18.1 CCC (Climate Change Commission)

18.2 DENR (Department of Environment and Natural Resources)
18.3 DILG (Department of Interior and Local Government)
18.4 DOE (Department of Energy)
18.5 DOST (Department of Science and Technology)
18.6 DTI (Department of Trade and Industry)
18.7 GEP (Geodetic Engineers of the Philippines)
18.8 IECEP (Institute of Electronics Engineers of the Philippines)
18.9 IIEE (Institute of Integrated Electrical Engineers)
18.10 PALA (Philippine Association of Landscape Architects)
18.11 PICE (Philippine Institute of Civil Engineers)
18.12 PIEP (Philippine Institute of Environmental Planners)
18.13 PIID (Philippine Institute of Interior Designers)
18.14 PSME (Philippine Society of Mechanical Engineers)
18.15 PSSE (Philippine Society of Sanitary Engineers)
18.16 UAP (United Architects of the Philippines)
18.17 BOMAP (Building Owners and Managers Association of the Philippines)
18.18 PABA (Philippine Association of Building Administrators)
18.19 PABO (Philippine Association of the Building Officials)

CHAPTER IV. CERTIFICATION PROCESS
Section 19. GREEN BUILDING PERMIT PROCESS

The Office of the Building Official shall review the building permit application for Green
Buildings as prepared by the design professionals in compliance with the requirements
of the GB Code and the various referral codes in accordance with Rule 3 of the NBC.
CHAPTER V. FINAL PROVISIONS
Section 20. SEPARABILITY CLAUSE

Should any part or provision of the GB Code be held unconstitutional or invalid by a
competent court, the other parts or provisions hereof which are not affected thereby
shall continue to be in full force and effect.
Section 21. EFFECTIVITY
This GB Code shall take effect fifteen (15) days after its publication once a week for
three (3) consecutive weeks in a newspaper of general circulation.
Section 22. TRANSITORY PROVISION
Those projects with building designs and plans that have already been prepared and signed by
all duly licensed design professionals shall be exempt from the coverage, provided that the
request for exemption shall be filed with the Office of the Building Official within 30 days after
the effectivity of this Code.

ANNEX 1 DEFINITION OF TERMS
Accredited Professional Organizations (APO) - professional organizations accredited

by the Professional Regulatory Commission (PRC)
Addition - any new construction which increases the height and / or floor area of
existing buildings / structures
Air Conditioning - the process of treating air so as to control simultaneously its

temperature, humidity, cleanliness, and distribution to meet the requirements of
conditioned space
Air-Conditioning, Heating, and Refrigeration Institute (AHRI) - trade association

representing manufacturers of HVACR and water heating equipment within the global
industry7
Alteration - works in buildings / structures involving changes in the materials used,

partitioning, location / size of openings, structural parts, existing utilities and equipment
but does not increase the building height and/or floor area
American Society of Heating, Refrigerating and Air-Conditioning Engineers

(ASHRAE) - global society founded in 1894, advancing human well-being through
sustainable technology for the built environment with focus on building systems, energy
efficiency, indoor air quality, refrigeration and sustainability within the industry
Applicable Provision any requirement that relates to a given condition
Building Owners and Managers Association of the Philippines (BOMAP) - helps

members ensure tenants satisfaction, maximize profits, and enhance asset values for
building owners and investors through market intelligence, education, networking, and
government advocacy
British thermal unit (Btu) - amount of heat energy needed to raise the temperature of
one pound of water by one degree Fahrenheit
Building Official (BO) - the Executive Officer of the Office of the Building Official (OBO)
appointed by the Secretary
Building Permit - document issued by the Building Official (BO) to an owner / applicant
to proceed with the construction, installation, addition, alteration, renovation,
conversion, repair, moving, demolition or other work activity of a specific
project/building/structure or portions thereof after the accompanying principal plans,
specifications and other pertinent documents with the duly notarized application are
found satisfactory and substantially conforming with the NBC and its Implementing
Rules and Regulations (IRR).
THE PHILIPPINE GREEN BUILDING CODE

Building Related Illness (BRI) - diagnosable illness whose cause and symptoms can
be directly attributed to a specific pollutant source within a building
Car, elevator the load-carrying unit including its platform, enclosure and door or gate
Clerestory - high windows above eye level
Climate Change - refers to any significant change in measures of climate, such as

temperature, precipitation, or wind, lasting for an extended period
Climate Change Commission (CCC) - the lead policy-making body of the government
tasked to coordinate, monitor and evaluate programs and action plans on climate
change
Coefficient of Performance (COP) - ratio of heating or cooling provided to electrical

energy consumed where higher COPs equate to lower operating costs
Common Area - part of the building premises is used by the occupants, owners,
tenants or other building users of which the landlord retains control and is responsible to
maintain in a reasonably safe condition that includes spaces such as lobby, corridor,
hallway, toilet, elevator or stairway
Compostable waste - mixture of various organic substances that can be placed into a
composition of decaying biodegradable materials which eventually turns into a nutrient-
rich material, used for fertilizing soil
Construction - all on-site work done in the site preparation, excavation, foundation,
assembly of all the components and installation of utilities, machineries and equipment
of buildings / structures
Conversion - change in the use or occupancy of buildings / structures or any portion/s

thereof, which has different requirements
Daylight - the natural light of day, which is a combination of all direct and indirect
sunlight during the daytime
Daylight Zone - area substantially illuminated by daylight consistently receiving

significant quantities of daylight during the day ( ASHRAE/IES 90.1-2010 energy standard)
Demolition - systematic dismantling or destruction of a building/structure, in whole or in

part
Department - the Department of Public Works and Highways

Department of Energy (DOE) - the executive department of the Philippine Government
responsible for preparing, integrating, coordinating, supervising and controlling all plans,
programs, projects and activities of the Government relative to energy exploration,
development, utilization, distribution and conservation
Department of Environment and Natural Resources (DENR) - the executive

department of the Philippine Government responsible for supervising and managing the
different programs and implementing rules governing the use and development of the
country's natural resources
Department of Interior and Local Government (DILG) - the executive department of

the Philippine Government responsible for promoting peace and order, ensuring public
safety and strengthening local government capability aimed towards the effective
delivery of basic services to the citizenry
Department of Public Works and Highways (DPWH) - executive department of the

Philippine Government that functions as the engineering and construction arm of the
Government tasked to continuously develop its technology for the purpose of ensuring
the safety of all infrastructure facilities and securing for all public works and highways
the highest efficiency and quality in construction
Department of Science and Technology (DOST) - the executive department of the

Philippine Government responsible for the coordination of science and technology-
related projects in the Philippines and to formulate policies and projects in the fields of
science and technology in support of national development
Department of Trade and Industry (DTI) - the executive department of the Philippine
Government tasked to expand Philippine trade, industries and investments as the
means to generate jobs and raise incomes for Filipinos
Door assembly - unit composed of a group of parts or components which make up a

closure for an opening to control passageway through a wall which consists of the
following parts: door; hinges; locking device or devices; operation contacts (such as
handles, knobs, push plates); miscellaneous hardware and closures; the frame,
including the head, threshold and jambs plus the anchorage devices
Elevator - a hoisting and lowering mechanism other than a dumbwaiter or freight

elevator which is designed to carry passanger or authorized personnel, in a protected
enclosure (elevator car) which moves along fixed guides in a vertical direction serving
two or more fixed landings/ floors on a hoistway.
Energy Efficiency Ratio (EER) - energy efficiency rating for room air conditioners that
lists how many Btu per hour are used for each watt of power it draws
Enthalpy Recovery Wheel an energy recovery device that transfers outgoing

temperature and humidity to the incoming outdoor air

Environmental Tobacco Smoke (ETS) - secondhand smoke consisting of airborne
particles emitted from the burning end of cigarettes, pipes, and cigars, exhaled by
smokers containing about 4,000 compounds, up to 50 of which are known to cause
cancer
Environmental Management Bureau (EMB) - national authority in the Philippines that

sets air and water quality standards and monitors ambient and point source pollutants
Escalator a power driven, inclined, continuous stairway for raising or lowering

passengers
Executive Director - the executive officer or head of the NBCDO
Geodetic Engineers of the Philippines (GEP) - accredited professional organization

of Geodetic Engineers composed of technically competent engineers with a high degree
of integrity, moral standards and professionalism and at pace with modern geodetic
engineering technologies
Government Agency - refers to any of the various units of the government including a
department, bureau, office, instrumentality, or government owned or controlled
corporation
Harmonics - increased heating in equipment and conductors, the reduction of which is

desirable
Hazardous anything that involves risk or danger to the safety and welfare of the
public
Heat Island Effect (HIE) - describes built up areas that are hotter than nearby rural
areas
Heating, Ventilating and Air Conditioning (HVAC) - system that helps maintain good
indoor air quality through adequate ventilation with filtration and provide thermal comfort
Illuminating Engineering Society of North America (IESNA) a non-profit learned

society whose mission is to improve the lighted environment by bringing together those
with lighting knowledge and translating that knowledge into actions that would benefit
the public
Implementing Rules and Regulations (IRR) - rules and regulations necessary in the
implementation of the provisions of GB Code
Indoor Environmental Quality (IEQ) - conditions inside the building that includes air
quality, access to daylight and views, pleasant acoustic conditions, and occupant
control over lighting and thermal comfort

Institute of Electronics Engineers of the Philippines (IECEP) - the integrated
accredited professional organization of professional electronics engineers, electronics
engineers and electronics technicians, whose objective is to promote, through scientific
inquiry and study the advancement of electronics in theory and practice, and its
application to allied fields of engineering and to human needs
Institute of Integrated Electrical Engineers of the Philippines (IIEE) - the accredited

organization of Electrical Engineers that aims to instill excellence to Electrical Engineers
and to give contribution to the development of the Philippines
Joint - a space between the adjacent surfaces of two bodies joined and held together
Light Monitor - raised structure running along the ridge of a double-pitched roof, with
its own roof running parallel with the main roof
Light Scoop - south-facing skylight, that uses tilted panels of transparent glass to
strategically bring daylight into an interior space.
Light Shelf - a horizontal surface that reflects daylight deep into a building, placed
above eye-level with high-reflectance upper surfaces, which reflect daylight onto the
ceiling and deeper into the space
Lighting Power Density (LPD) - amount of electric lighting, usually measured in watts
per square foot, being used to illuminate a given space
Material Recovery Facility (MRF) - a facility designed to receive, sort, process, and
store compostable and recyclable materials efficiently and in an environmentally sound
manner
Material Safety Data Sheet (MSDS) - data providing procedures for handling or
working with a material or product in a safe manner, which includes information such as
physical data, toxicity, health effects, first aid, reactivity, storage, disposal, protective
equipment and spill handling procedures
Mixed Occupancy - enclosed structure with two or more primary usages and where at
least two of these primary usages fall into different classification of use
Moving Ramp / Walkway a type of horizontal passenger-carrying device on which

passengers stand or walk, with its surface remaining parallel to its direction of motion is
uninterrupted
National Building Code (NBC) P.D. 1096 is a uniform building code in the
Philippines which embodies up-to-date and modern technical knowledge on building
design, construction, use, occupancy and maintenance

National Building Code Development Office (NBCDO) - created through DPWH
Department Order, assist the Secretary in the administration and enforcement of the
provisions of the GB Code and its IRR
Non-recyclable Waste - not able to be processed or treated for reuse in some form
Office of the Building Official (OBO) - the office authorized to enforce the provisions
of NBC and its IRR in the field as well as the enforcement of orders and decisions made
pursuant thereto
Operable Window - a window unit with one or more sections that can be opened for
ventilation
Overall Thermal Transfer Value - (OTTV) measure of the energy consumption of a

building envelope
Outside Supply Air (OSA) - air containing at least the minimum volume of outside air
filtered and conditioned to the required temperature and humidity
Parking, Covered - parking under roof that does not contribute to the heat island effect
Parking, Open - parking structure with wall openings open to the atmosphere,
distributed over 40 percent of the building perimeter or uniformly over two opposing
sides to provide ventilation
Philippine Association of Building Administrators (PABA) a non-profit

organization for Building Administrators and Property Managers
Philippine Association of Building Officials (PABO) association of Building

Officials in the Philippines
Philippine Association of Landscape Architects (PALA) - the integrated and

accredited organization of landscape architecture professionals responsible for the
advancement of the profession as an instrument of service in improving the quality of
life within a better natural and built environment
Philippine Institute of Civil Engineers (PICE) - a professional organization for civil

engineers in the Philippines formed by merging two separate organizations of civil
engineers: one group working from government sector and the second group working in
the private sector
Philippine Institute of Environmental Planners (PIEP) - a national organization of

professionally trained planners who will make an advancement in the studies of
environmental planning in the best interest of the nation

Philippine Institute of Interior Designers (PIID) the accredited professional
organization of Interior Designers creating platforms for learning and sustainable
creativity, adhering to international standards while preserving the Filipino heritage
Philippine National Standards (PNS) - documents established by consensus through

technical committees and approved by the Department of Trade and Industry Bureau of
Product Standards that ensures desirable characteristics of products and services such
as quality, environmental friendliness, safety, reliability, efficiency and interchangeability
Philippine Society of Mechanical Engineers (PSME) the organization of

Mechanical Engineers in the Philippines uniting and enjoining the mechanical engineers
in the pursuit of further professional growth and to uplift the profession
Philippine Society of Sanitary Engineers (PSSE) - the only professional organization

of Sanitary Engineers in the Philippines accredited by PRC and soon to be renamed to
Philippine Society of Environmental and Sanitary Engineers, Inc. (PSEnSE)
Philippine Society of Ventilating Air-Conditioning and Refrigerating Engineers

(PSVARE) - is a duly registered non-stock, non-profit organization, the members of
which are consultants, contractors, manufacturers, suppliers who are all involved in the
practice of air conditioning, ventilation, and refrigeration systems
Professional Regulatory Commission (PRC) - the instrument of the Filipino people in

securing for the nation a reliable, trustworthy and progressive system of determining the
competence of professionals by credible and valid licensure examinations and
standards of professional practice that are globally recognized
Photoelectric Sensor - a device used to detect the distance, absence, or presence of

an object by using a light transmitter, often infrared and a photoelectric receiver
R-Value - resistance value or the capacity to resist heat loss or its thermal resistance
Recyclable Waste - an item or material capable of being used again
Referral Codes the applicable provisions of the various agency and technical
professional codes supplementary to the NBC and GB Code
Regularly Occupied Space - areas where one or more individuals normally spend time
(more than one hour per person per day on average) seated or standing as they work,
study, or perform other focused activities inside a building
Renovation - any physical change made on buildings/structures to increase the value,

quality, and/or to improve the aesthetic
Repair - remedial work done on any damaged or deteriorated portion/s of building /

structure to restore to its original condition

Seasonal Energy Efficiency Ratio (SEER) - energy efficiency rating for central air
conditioners
Secretary - head or chief executive officer of the DPWH
Sewage Treatment Plant (STP) - an industrial structure designed to

remove biological or chemical waste products from water, thereby permitting the treated
water to be used for other purposes
Sick Building Syndrome (SBS) - Building whose occupants experience acute health
and/or comfort effects that appear to be linked to time spent therein, but where no
specific illness or cause can be identified
Smoking Area - a designated area in which smoking is permitted
Solar Heat Gain Coefficient (SHGC) - fraction of solar gain admitted through a
window, expressed as a number between 0 and 1
Solar Reflectance Index (SRI) - a measure of a materials ability to reflect heat with
white or light colors having high reflectance and dark or black surfaces with low or little
reflectance thereby having higher temperatures
Special Waste - a class of waste that has unique regulatory requirements with potential
environmental impacts that needs to be managed to minimize the risk of harm to the
environment and human health
Staff - personnel of the NBCDO
Storey portion of a building/structure included between the uppermost surface (or

finish level) of any floor and the uppermost surface (or finish level) of the next floor
above or below it. If the uppermost surface (or finish level) of a floor/level above the
uppermost surface (or finish level) of a basement, cellar or unused under-floor space is
more than 3.60 meters above established grade as defined herein at any point, such
basement, cellar or unused under-floor space shall be considered a storey.
Sun breaker - feature of a building commonly used as external shading devices, which
reduces heat gain within that building by deflecting solar rays to reduce energy cooling
loads
Total Gross Floor Area (TGFA) - the total floor space within the main auxiliary
buildings primarily consisting of the GFA and all other enclosed support areas together
with all other usable horizontal areas/surfaces above and below established grade level
that are all physically attached to the building/s which shall consists of the following:
Covered areas used for parking and driveways, services and utilities.
Toxic Materials - substances that may cause harm to an individual if it enters the body
through inhalation, skin contactor ingestion

U-Value - describes how well a building element conducts heat, measuring the rate of
heat transfer through a building element over a given area, under standardized
conditions
United Architects of the Philippines (UAP) - the Integrated and Accredited
Professional Organization of Architects in the Philippines responsible in the
improvement and sustainability of the quality of built environment
Unity Power Factor - power factor of 1.0 obtained when current and voltage are in
phase, as in a circuit containing only resistance or in a reactive circuit at resonance.
Unpaved Surface Area (USA) - the portion of the lot that shall remain unpaved and
reserved for softscaping / planting; expressed as a percentage (%) of the Total Lot Area
or TLA and may be combined with the Impervious Surface Area (ISA) to satisfy the
Total Open Space within Lot (TOSL), i.e., the total open space requirement for each
type of use or occupancy
Urea formaldehyde - combination of urea and formaldehyde used in some glues and
adhesives, particularly in composite wood products, emitting formaldehyde at room
temperature, which is a toxic and possibly carcinogenic gas
Variable Speed Drive (VSD) - a piece of equipment that regulates the speed and
rotational force, or torque output, of an electric motor.
Variable-Voltage and Variable-Frequency (VVVF) - employs frequency inverter
technology which regulates input voltage and frequency throughout the journey, drawing
much less current during acceleration and deceleration
Ventilation process of supplying or removing air by natural or mechanical means to

or from any space.
Visible Transmittance (Tvis) - the ratio of total transmitted light to total incident light
with the higher value allowing more incident light to pass through the glazing
Volatile Organic Compound (VOC) - organic chemicals with have a high vapor
pressure at ordinary room temperature that are dangerous to human health or cause
harm to the environment
Weather-Stripping - narrow piece of material, such as plastic, rubber, felt, or metal,

installed around doors and windows to protect an interior from external extremes in
temperature.
Window assembly - a unit, which includes a window and the anchorage between the
window and the wall
Window to Wall Ratio (WWR) - ratio of the total area of a building facade, which is
occupied by windows (glass area and frame)

ANNEX 2 GLASS LIBRARY
Gap Center Glass

Glass Gap Solar Heat Visible
Thickness U-Value Gain
Shading
Transmit-
Coefficient
WINDOW / DOOR Type # IP SI Gas IP SI Coefficient tance
(BTU / sqft- (W /
Code Panes (in) (mm) Fill h-F) sqm-C) SHGC SC Tvis
Single Clear 1000 1 n/a n/a n/a 1.11 6.30 0.86 1 0.9
Single Tint Bronze 1200 1 n/a n/a n/a 1.11 6.30 0.73 0.84 0.69
Single Tint Green 1202 1 n/a n/a n/a 1.11 6.30 0.72 0.83 0.82
Single Tint Grey 1204 1 n/a n/a n/a 1.11 6.30 0.71 0.83 0.61
Single Low Iron 1003 1 n/a n/a n/a 1.1 6.25 0.90 1.04 0.91
Single Ref-D Clear 1417 1 n/a n/a n/a 1.08 6.13 0.50 0.58 0.33
Single Ref-D Tint 1418 1 n/a n/a n/a 1.08 6.13 0.46 0.53 0.25
Single Ref-B Clear-H 1407 1 n/a n/a n/a 0.97 5.51 0.39 0.45 0.3
Single Ref-B Tint-H 1410 1 n/a n/a n/a 0.97 5.51 0.34 0.4 0.18
Single Ref-B Clear-L 1406 1 n/a n/a n/a 0.96 5.45 0.31 0.35 0.2
Single Ref-A Clear-L 1402 1 n/a n/a n/a 0.95 5.39 0.31 0.36 0.2
Single Ref-C Clear-H 1413 1 n/a n/a n/a 0.94 5.34 0.35 0.41 0.22
Single Ref-C Tint-H 1416 1 n/a n/a n/a 0.94 5.34 0.31 0.37 0.13
Single Ref-A Tint-H 1405 1 n/a n/a n/a 0.93 5.28 0.29 0.34 0.1
Single Ref-C Clear-M 1412 1 n/a n/a n/a 0.92 5.22 0.32 0.37 0.19
Single Ref-C Tint-M 1415 1 n/a n/a n/a 0.92 5.22 0.29 0.34 0.11
Single Ref-A Tint-M 1404 1 n/a n/a n/a 0.9 5.11 0.25 0.29 0.09
Single Ref-B Tint-M 1409 1 n/a n/a n/a 0.89 5.05 0.28 0.33 0.13
Single Low-E Clear
1600 1 n/a n/a n/a 0.88 5.00 0.78 0.91 0.85
(e2=.4)
Single Ref-C Clear-L 1411 1 n/a n/a n/a 0.88 5.00 0.25 0.29 0.13
Single Ref-C Tint-L 1414 1 n/a n/a n/a 0.88 5.00 0.25 0.29 0.08
Single Ref-B Tint-L 1408 1 n/a n/a n/a 0.87 4.94 0.23 0.26 0.05
Single Ref-A Tint-L 1403 1 n/a n/a n/a 0.87 4.94 0.22 0.26 0.05
Single Low-E Clear
1601 1 n/a n/a n/a 0.76 4.32 0.77 0.89 0.82
(e2=.2)
Double Low Iron 2006 2 0.25 6.35 Air 0.57 3.24 0.83 0.96 0.84
Double Clear 2000 2 0.25 6.35 Air 0.57 3.24 0.76 0.88 0.81
Double Tint Bronze 2200 2 0.25 6.35 Air 0.57 3.24 0.62 0.72 0.62
Double Tint Green 2206 2 0.25 6.35 Air 0.57 3.24 0.62 0.72 0.74
Double Tint Grey 2212 2 0.25 6.35 Air 0.57 3.24 0.61 0.71 0.55
Double Ref-D Clear 2460 2 0.25 6.35 Air 0.56 3.18 0.42 0.49 0.31
Double Ref-D Tint 2470 2 0.25 6.35 Air 0.56 3.18 0.35 0.41 0.23
Double Ref-B Clear-H 2426 2 0.25 6.35 Air 0.53 3.01 0.30 0.35 0.27
Double Ref-B Tint-H 2436 2 0.25 6.35 Air 0.53 3.01 0.25 0.29 0.16
Double Ref-C Clear-H 2446 2 0.25 6.35 Air 0.52 2.95 0.27 0.32 0.2
Double Ref-A Clear-H 2406 2 0.25 6.35 Air 0.52 2.95 0.23 0.27 0.18

Gap Center Glass
Glass Gap Solar Heat Visible
Thickness U-Value Gain
Shading
Transmit-
Coefficient
(BTU / sqft- (W /
Double Ref-B Clear-L 2420 2 0.25 6.35 Air 0.52 2.95 0.23 0.27 0.18
Double Ref-D Tint-H 2456 2 0.25 6.35 Air 0.52 2.95 0.23 0.26 0.12
Double Ref-C Clear-M 2443 2 0.25 6.35 Air 0.51 2.90 0.24 0.28 0.17
Double Ref-A Tint-H 2416 2 0.25 6.35 Air 0.51 2.90 0.21 0.24 0.09
Double Ref-C Tint-M 2453 2 0.25 6.35 Air 0.51 2.90 0.21 0.24 0.1
Double Low-E (e3=.4)
2600 2 0.25 6.35 Air 0.5 2.84 0.72 0.84 0.77
Clear
Double Ref-B Tint-M 2433 2 0.25 6.35 Air 0.5 2.84 0.20 0.24 0.12
Double Ref-A Clear-M 2403 2 0.25 6.35 Air 0.5 2.84 0.19 0.22 0.13
Double Ref-C Clear-L 2440 2 0.25 6.35 Air 0.5 2.84 0.19 0.22 0.12
Double Ref-C Tint-L 2450 2 0.25 6.35 Air 0.5 2.84 0.18 0.21 0.07
Double Ref-A Tint-M 2413 2 0.25 6.35 Air 0.5 2.84 0.17 0.2 0.08
Double Clear 2001 2 0.50 12.70 Air 0.49 2.78 0.76 0.89 0.81
Double Ref-A Tint-L 2410 2 0.25 6.35 Air 0.49 2.78 0.15 0.18 0.05
Double Ref-B Tint-L 2430 2 0.25 6.35 Air 0.49 2.78 0.15 0.18 0.05
Double Ref-A Clear-L 2400 2 0.25 6.35 Air 0.49 2.78 0.14 0.17 0.07
Double Clear 2004 2 0.50 12.70 Air 0.48 2.73 0.70 0.81 0.78
Double Tint Blue 2219 2 0.50 12.70 Air 0.48 2.73 0.49 0.57 0.5
Double Ref-D Clear 2461 2 0.50 12.70 Air 0.48 2.73 0.42 0.49 0.31
Double Ref-D Tint 2471 2 0.50 12.70 Air 0.48 2.73 0.35 0.4 0.23
Double Low Iron 2008 2 0.50 12.70 Argon 0.46 2.61 0.83 0.96 0.84
Double Clear 2002 2 0.50 12.70 Argon 0.46 2.61 0.76 0.89 0.81
2610 2 0.25 6.35 Air 0.46 2.61 0.72 0.84 0.74
Clear
Double Tint Bronze 2202 2 0.50 12.70 Argon 0.46 2.61 0.62 0.72 0.62
Double Tint Green 2208 2 0.50 12.70 Argon 0.46 2.61 0.61 0.71 0.74
Double Tint Grey 2214 2 0.50 12.70 Argon 0.46 2.61 0.61 0.7 0.55
Double Low Iron 2011 2 0.50 12.70 Argon 0.45 2.56 0.82 0.95 0.83
Double Clear 2005 2 0.50 12.70 Argon 0.45 2.56 0.70 0.81 0.78
2613 2 0.25 6.35 Air 0.45 2.56 0.66 0.77 0.72
Clear
Double Tint Bronze 2205 2 0.50 12.70 Argon 0.45 2.56 0.49 0.56 0.47
Double Tint Green 2211 2 0.50 12.70 Argon 0.45 2.56 0.49 0.57 0.66

Gap Center Glass Solar Heat Visible
Glass Gap Shading
Thickness U-Value Gain Transmit-
Coefficient
(BTU / sqft- (W /
Double Tint Blue 2220 2 0.50 12.70 Argon 0.45 2.56 0.49 0.56 0.5
Double Tint Grey 2217 2 0.50 12.70 Argon 0.45 2.56 0.47 0.54 0.38
Double Ref-D Clear 2462 2 0.50 12.70 Argon 0.45 2.56 0.42 0.49 0.31
Double Ref-D Tint 2472 2 0.50 12.70 Argon 0.45 2.56 0.34 0.4 0.23
2640 2 0.25 6.35 Air 0.44 2.50 0.63 0.74 0.77
Clear
2630 2 0.25 6.35 Air 0.44 2.50 0.60 0.69 0.77
Clear
Double Ref-B Clear-H 2427 2 0.50 12.70 Air 0.44 2.50 0.29 0.34 0.27
Double Ref-B Tint-H 2437 2 0.50 12.70 Air 0.44 2.50 0.23 0.27 0.16
Double Ref-A Clear-H 2407 2 0.50 12.70 Air 0.44 2.50 0.22 0.26 0.18
Double Ref-B Clear-L 2421 2 0.50 12.70 Air 0.44 2.50 0.22 0.25 0.18
Double Electrochromic
Absorbing
2800 2 0.25 6.35 Air 0.43 2.44 0.73 0.85 0.76
Bleached/Colored, 6.3-mm
Gap
Reflecting
2820 2 0.25 6.35 Air 0.43 2.44 0.63 0.73 0.73
Gap
2633 2 0.25 6.35 Air 0.43 2.44 0.56 0.65 0.75
Clear
Double Low-E (e2=.1) Tint 2636 2 0.25 6.35 Air 0.43 2.44 0.39 0.45 0.44
Double Ref-C Clear-H 2447 2 0.50 12.70 Air 0.43 2.44 0.26 0.3 0.2
Double Ref-D Tint-H 2457 2 0.50 12.70 Air 0.43 2.44 0.21 0.24 0.12
Double Ref-A Tint-H 2417 2 0.50 12.70 Air 0.43 2.44 0.19 0.22 0.09
Absorbing
2801 2 0.25 6.35 Air 0.43 2.44 0.18 0.21 0.12
Gap
Reflecting
2821 2 0.25 6.35 Air 0.43 2.44 0.17 0.2 0.14
Gap
2660 2 0.25 6.35 Air 0.42 2.38 0.44 0.51 0.7
Clear
2663 2 0.25 6.35 Air 0.42 2.38 0.42 0.49 0.68
Clear
2666 2 0.25 6.35 Air 0.42 2.38 0.31 0.35 0.41
Tint
Double Ref-C Clear-M 2444 2 0.50 12.70 Air 0.42 2.38 0.23 0.27 0.17
Double Ref-C Tint-M 2454 2 0.50 12.70 Air 0.42 2.38 0.19 0.22 0.1
2601 2 0.50 12.70 Air 0.41 2.33 0.73 0.85 0.77
Clear
Electrochromic Reflecting
2860 2 0.25 6.35 Air 0.41 2.33 0.46 0.54 0.64
Gap

Glass Gap Shading
Coefficient
(BTU / sqft- (W /
Electrochromic Absorbing
2840 2 0.25 6.35 Air 0.41 2.33 0.44 0.51 0.66
Gap
Double Ref-B Clear-H 2428 2 0.50 12.70 Argon 0.41 2.33 0.29 0.34 0.27
Double Ref-B Tint-H 2438 2 0.50 12.70 Argon 0.41 2.33 0.23 0.27 0.16
Double Ref-B Tint-M 2434 2 0.50 12.70 Air 0.41 2.33 0.19 0.22 0.12
Double Ref-C Clear-L 2441 2 0.50 12.70 Air 0.41 2.33 0.18 0.2 0.12
Double Ref-A Clear-M 2404 2 0.50 12.70 Air 0.41 2.33 0.17 0.2 0.13
Double Ref-C Tint-L 2451 2 0.50 12.70 Air 0.41 2.33 0.16 0.19 0.07
2841 2 0.25 6.35 Air 0.41 2.33 0.16 0.18 0.1
Gap
2861 2 0.25 6.35 Air 0.41 2.33 0.16 0.18 0.12
Gap
Double Ref-A Tint-M 2414 2 0.50 12.70 Air 0.41 2.33 0.15 0.18 0.08
Double Ref-A Clear-H 2408 2 0.50 12.70 Argon 0.4 2.27 0.22 0.25 0.18
Double Ref-B Clear-L 2422 2 0.50 12.70 Argon 0.4 2.27 0.21 0.25 0.18
Double Ref-B Tint-L 2431 2 0.50 12.70 Air 0.4 2.27 0.14 0.16 0.05
Double Ref-A Clear-L 2401 2 0.50 12.70 Air 0.4 2.27 0.13 0.15 0.07
Double Ref-A Tint-L 2411 2 0.50 12.70 Air 0.4 2.27 0.13 0.15 0.05
Triple Clear 3001 3 0.25 6.35 Air 0.39 2.21 0.68 0.79 0.74
Double Ref-C Clear-H 2448 2 0.50 12.70 Argon 0.39 2.21 0.26 0.3 0.2
Double Ref-D Tint-H 2458 2 0.50 12.70 Argon 0.39 2.21 0.20 0.24 0.12
Double Ref-A Tint-H 2418 2 0.50 12.70 Argon 0.39 2.21 0.19 0.21 0.09
Double Ref-C Clear-M 2445 2 0.50 12.70 Argon 0.38 2.16 0.23 0.26 0.17
Double Ref-C Tint-M 2455 2 0.50 12.70 Argon 0.38 2.16 0.19 0.21 0.1
Double Ref-A Clear-M 2405 2 0.50 12.70 Argon 0.38 2.16 0.17 0.2 0.13
Double Ref-A Tint-M 2415 2 0.50 12.70 Argon 0.38 2.16 0.15 0.17 0.08
Double Ref-B Tint-M 2435 2 0.50 12.70 Argon 0.37 2.10 0.18 0.21 0.12
2602 2 0.50 12.70 Argon 0.36 2.04 0.73 0.85 0.77
Clear
Double Ref-C Clear-L 2442 2 0.50 12.70 Argon 0.36 2.04 0.17 0.2 0.12
Double Ref-C Tint-L 2452 2 0.50 12.70 Argon 0.36 2.04 0.15 0.18 0.07
Double Ref-A Tint-L 2412 2 0.50 12.70 Argon 0.36 2.04 0.13 0.15 0.05
Double Ref-B Tint-L 2432 2 0.50 12.70 Argon 0.36 2.04 0.13 0.15 0.05
Double Ref-A Clear-L 2402 2 0.50 12.70 Argon 0.36 2.04 0.12 0.14 0.07
2611 2 0.50 12.70 Air 0.35 1.99 0.73 0.85 0.74
Clear
2614 2 0.50 12.70 Air 0.35 1.99 0.67 0.78 0.72
Clear

Glass Gap Shading
Coefficient
(BTU / sqft- (W /
Triple Clear 3002 3 0.50 12.70 Air 0.32 1.82 0.68 0.79 0.74
2641 2 0.50 12.70 Air 0.32 1.82 0.64 0.75 0.77
Clear
2631 2 0.50 12.70 Air 0.32 1.82 0.60 0.69 0.77
Clear
Triple Low-E (e5=.1) Clear 3601 3 0.25 6.35 Air 0.32 1.82 0.57 0.67 0.7
Triple Low-E Film (88)
3641 3 0.25 6.35 Air 0.32 1.82 0.57 0.66 0.71
Clear
3651 3 0.25 6.35 Air 0.32 1.82 0.46 0.53 0.64
Clear
Absorbing
2802 2 0.50 12.70 Air 0.31 1.76 0.74 0.86 0.76
Bleached/Colored, 12.7-
mm Gap
Reflecting
2822 2 0.50 12.70 Air 0.31 1.76 0.64 0.74 0.73
mm Gap
2634 2 0.50 12.70 Air 0.31 1.76 0.56 0.65 0.75
Clear
Double Low-E (e2=.1) Tint 2637 2 0.50 12.70 Air 0.31 1.76 0.37 0.43 0.44
3661 3 0.25 6.35 Air 0.31 1.76 0.35 0.41 0.54
Clear
3671 3 0.25 6.35 Air 0.31 1.76 0.30 0.35 0.45
Clear
Triple Low-E Film (66) Tint 3663 3 0.25 6.35 Air 0.31 1.76 0.26 0.3 0.32
Absorbing
2803 2 0.50 12.70 Air 0.31 1.76 0.20 0.19 0.12
mm Gap
Reflecting
2823 2 0.50 12.70 Air 0.31 1.76 0.15 0.17 0.14
mm Gap
2612 2 0.50 12.70 Argon 0.3 1.70 0.74 0.86 0.74
Clear
2661 2 0.50 12.70 Air 0.3 1.70 0.44 0.51 0.7
Clear
2615 2 0.50 12.70 Argon 0.29 1.65 0.68 0.79 0.72
Clear
Triple Clear 3002 3 0.50 12.70 Argon 0.29 1.65 0.68 0.79 0.74
2842 2 0.50 12.70 Air 0.29 1.65 0.51 0.59 0.66
mm Gap
2862 2 0.50 12.70 Air 0.29 1.65 0.47 0.55 0.64
mm Gap

Glass Gap Shading
Coefficient
(BTU / sqft- (W /
2664 2 0.50 12.70 Air 0.29 1.65 0.42 0.48 0.68
Clear
2667 2 0.50 12.70 Air 0.29 1.65 0.29 0.33 0.41
Tint
2863 2 0.50 12.70 Air 0.29 1.65 0.14 0.16 0.12
mm Gap
2843 2 0.50 12.70 Air 0.29 1.65 0.13 0.15 0.1
mm Gap
Triple Low-E (e2=e5=.1)
3621 3 0.25 6.35 Air 0.27 1.53 0.47 0.54 0.66
Clear
Absorbing
2804 2 0.50 12.70 Argon 0.26 1.48 0.74 0.86 0.76
mm Gap, Argon
2642 2 0.50 12.70 Argon 0.26 1.48 0.65 0.75 0.77
Clear
Reflecting
2824 2 0.50 12.70 Argon 0.26 1.48 0.64 0.74 0.73
mm Gap, Argon
2632 2 0.50 12.70 Argon 0.26 1.48 0.59 0.69 0.77
Clear
2635 2 0.50 12.70 Argon 0.26 1.48 0.56 0.66 0.75
Clear
Double Low-E (e2=.1) Tint 2638 2 0.50 12.70 Argon 0.26 1.48 0.37 0.43 0.44
Absorbing
2805 2 0.50 12.70 Argon 0.26 1.48 0.15 0.18 0.12
mm Gap, Argon
Reflecting
2825 2 0.50 12.70 Argon 0.26 1.48 0.15 0.16 0.14
mm Gap, Argon
2662 2 0.50 12.70 Argon 0.24 1.36 0.43 0.5 0.7
Clear
Triple Low-E (e5=.1) Clear 3602 3 0.50 12.70 Air 0.23 1.31 0.58 0.67 0.7
3642 3 0.50 12.70 Air 0.23 1.31 0.57 0.67 0.71
Clear
2844 2 0.50 12.70 Argon 0.23 1.31 0.52 0.6 0.66
mm Gap, Argon
2864 2 0.50 12.70 Argon 0.23 1.31 0.48 0.56 0.64
mm Gap, Argon
2665 2 0.50 12.70 Argon 0.23 1.31 0.42 0.48 0.68
Clear

Glass Gap Shading
Coefficient
(BTU / sqft- (W /
2668 2 0.50 12.70 Argon 0.23 1.31 0.28 0.32 0.41
Tint
2865 2 0.50 12.70 Argon 0.23 1.31 0.13 0.15 0.12
mm Gap, Argon
2845 2 0.50 12.70 Argon 0.23 1.31 0.12 0.14 0.1
mm Gap, Argon
3652 3 0.50 12.70 Air 0.22 1.25 0.47 0.54 0.64
Clear
3662 3 0.50 12.70 Air 0.22 1.25 0.36 0.42 0.54
Clear
3672 3 0.50 12.70 Air 0.22 1.25 0.31 0.36 0.45
Clear
Triple Low-E (e5=.1) Clear 3603 3 0.50 12.70 Argon 0.19 1.08 0.58 0.67 0.7
3622 3 0.50 12.70 Air 0.17 0.97 0.47 0.55 0.66
Clear
3623 3 0.50 12.70 Argon 0.14 0.79 0.47 0.55 0.66
Clear
Quadruple, Two Low-E
Glass, Two Low-E Film, 4651 4 0.31 7.87 Krypton 0.12 0.68 0.45 0.52 0.62
Clear. Krypton
Source: US Department of Energy

ANNEX 3 Insulating Values of Common Building Materials
R-VALUE (1/C) R-VALUE PER inch (1/K)

MATERIAL
sqft-hr deg sqft-hr deg sqm deg
sqm deg C/W
F/Btu F/Btu C/W
METAL ROOF 0.04 0.00704
ALUMINUM ALLOY 0.01 0.00176
PLASTIC ROOF
CEMENT TILE ROOF 0.21 0.03698
CLAY TILE - 3 inch [75mm]
0.8 0.14088
(1 CELL DEEP)
ASPHALT SHINGLES 0.44 0.07748
0.02113 to
ASPHALT 0.12 - 0.34
0.05987
STRAW THATCH 2.04 0.35924
FIBERBOARD - 1/2 inch [12.5mm] 1.32 0.23245
PLYWOOD - 1/2 inch [12.5mm] 0.62 0.10918
PLYWOOD - 3/4 inch [18.75mm] 0.94 0.16553
CONCRETE (sand, gravel) 140 lb/cu ft 0.00881 to
0.05 - 0.11
[2246 kg/cu m] 0.01937
CONCRETE (sand, gravel) 0.04226 to
0.24 - 0.30
80 lb/cu ft [1283 kg/ cu m] 0.05283
CEMENT MORTAR 0.10 0.01761
STONE 0.01 0.00176
0.00528 to
MARBLE/GRANITE, LIMESTONE 0.03 - 0.12
0.02113
CERAMIC TILE - 1 inch [25mm] 0.08 0.01409
STONE TILE - 1 inch [25mm] 0.05 0.00881
AIR SPACE UP TO 4 inches [100mm] 1 0.1761
INSIDE SURFACE AIR FILM 0.61 0.10742
EXTERIOR SURFACE AIR FILM 0.17 0.02994
0.01057 to
MEMBRANE 0.06-0.12
0.02113
0.04403 to
SOIL (with 20% moisture content) 0.25 - 1.0
0.17610
SAND - 1/2 inch [12.5mm] 0.1 0.01761
Source: 2013 ASHRAE Handbook of Fundamentals / 1958 ASHAE Guide / www.inspectApedia.com

ANNEX 4 Philippine Green Building Code Activities
Philippine Green Building Code Multi-Stakeholders Consultation
Baguio City (Regions 1, CAR)

November 3-7, 2014
Tagaytay City
(Regions IV-A, IV-B, V)
December 11, 2014
Head Office
(NCR)
January 21, 2015

Davao City
(Regions IX, XI, XIII)
January 30, 2015
Cebu City
(Regions VI, VII, VIII)
February 10, 2015
Cagayan de Oro
(Regions X, XII)
February 24, 2015
BALANGA, BATAAN
(Regions II, III)
MARCH 10-11, 2015

Philippine
Green Building Code Writeshop (Clark, Pampanga)
April 27-28, 2015
Philippine Green Building Code Launching

Green Breakthroughs 2015
June 25, 2015, Philippine Trade Training Center

Philippine Green Building Code Training of Trainers
Regions I, IV-B and CAR
Regions III, IV-A
Regions V, VII, VIII, IX, X, XI, XII, XIII, and other agencies

NCR
Other Philippine GB Code Meetings/ Activities


Philippine Green Building Code

Uploaded by

Copyright:

Available Formats

Philippine Green Building Code

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Philippine Green Building Code

Uploaded by

Copyright:

Available Formats

THE PHILIPPINE

GREEN BUILDING CODE

My warmest greetings to the Department of

Today is an historic moment as the government,

BENIGNO S. AQUINO III

The time has come for the Philippines to champion

A gamut of minimum standards aimed to reduce greenhouse emissions and introduce

Chapter I. GENERAL PROVISIONS 1

Annex 1 Definition Of Terms

Table 1. Minimum TGFA for Building Use / Occupancy

Figure 1. Schematic representation of a window and related horizontal

THE PHILIPPINE GREEN BUILDING CODE ii

CHAPTER I. GENERAL PROVISIONS

THE PHILIPPINE GREEN BUILDING CODE 1

Section 5. Definition of Terms

Section 8. Building Use / Occupancy Coverage and Application

THE PHILIPPINE GREEN BUILDING CODE 2

Section 10. Energy Efficiency

THE PHILIPPINE GREEN BUILDING CODE 3

10.1.2 Glass Properties

Table 2. SHGC and VLT for different WWR

THE PHILIPPINE GREEN BUILDING CODE 4

The SHGC requirement in Table 2 can be adjusted if sun breakers are

Figure 1. Schematic representation of a window and related horizontal

THE PHILIPPINE GREEN BUILDING CODE 5

For glass products, see Annex 2 Glass Library.

10.2 NATURAL VENTILATION

i. Operable windows or balcony door shall be provided in regularly occupied

THE PHILIPPINE GREEN BUILDING CODE 6

10.3 BUILDING ENVELOPE COLOR

Building metal roof surfaces shall either

Table 5. Solar Reflectance Index Values Of Basic Colored Coatings

THE PHILIPPINE GREEN BUILDING CODE 7

Source: PPG Cool Color Series - www.coolcolorsdatabase.ppg.com

d. Exceptions. There are no exceptions to this provision.

THE PHILIPPINE GREEN BUILDING CODE 8

For Insulating Values of Common Building Materials see Annex 3

Table 6. R-Value of Common Roof Insulation

Source: U.S. Department of Energy Insulation Materials

THE PHILIPPINE GREEN BUILDING CODE 9

10.5.1 Air Conditioning System

THE PHILIPPINE GREEN BUILDING CODE 10

Size Category Sub-Category

Small-duct high AHRI 210/240;

65, 000 & 68, 585 & 11.5 EER

Air conditioners, 14.0 EER

Source: 2010 PSVARE Standards

THE PHILIPPINE GREEN BUILDING CODE 11

Minimum Efficiency Test

Source: 2010 PSVARE Standards

THE PHILIPPINE GREEN BUILDING CODE 12

c. Requirements. Applicable buildings shall comply with the minimum

THE PHILIPPINE GREEN BUILDING CODE 13

THE PHILIPPINE GREEN BUILDING CODE 14

i. All motors for mechanical equipment over five (5) kW shall be

THE PHILIPPINE GREEN BUILDING CODE 15

THE PHILIPPINE GREEN BUILDING CODE 16

10.6 ELECTRICAL SYSTEMS

10.6.1 Daylight Provision