SP/CPX-594 Pipelayers

Max lift capacity 90,000 kg / 200,000 lb

Operating weight 55,100 kg / 121,500 lb (SP & CPX)
Net flywheel power 305 kW / 410 HP
SP/CPX-594 PIPELAYER
ABOUT THE SP/CPX-594
The SP/CPX Series are fully hydraulic pipelayers which have been
converted from either a Cat mechanical pipelayer or a Cat dozer.
The mechanical pipelayer requires only a Hydraulic Kit whereas a
dozer requires both a Hydraulic Kit and drawworks. This is known
as a full Conversion Package. Both the Hydraulic Kit and Conver-
sion Package are also available for purchase as standalone items
for you to install on your own machine.

SP-594 Conversion Package

The SP-594 is a conversion of a Caterpillar D9H tractor into a fully
hydraulic-controlled sideboom. This includes the CPX hydraulic kit,
counterweight assembly, upper and lower hardbar, A-frame, boom
and blocks.

594 CPX Hydraulic Kit

The CPX package is a rapid conversion of your Caterpillar me-
chanical 594 sideboom into a fully hydraulic-controlled sideboom.

CE APPROVAL
These pipelayers will qualify for CE approval with the inclusion
of the following optional features:
Noise-proof engine enclosure
Blocks with anti-friction bearings
Sturdier booms
Electronic anti-tipping system
General Specifications
CAPACITIES
Hydraulic System Tank 120 liters / 32 U.S. gallons

HYDRAULIC SYSTEM
Pump Variable displacement, load sensing
Maximum flow 286 liters / minute
Control blocks LUDV type, three balanced spools
Maximum working pressure 320 bar / 4640 p.s.i.
Load lowering valves 1-1/4 inch flangeable, pilot assisted

hYDRAULIC WINCHES
Type Hydraulically controlled drums (reversible) Driven by variable flow
hydraulic pump and control valve block in open circuit
Final drive Compact hydrostatic drive unit, three-stage planetary gear
Brakes Integrated multiple-disk brake, spring applied hydraulic released
HOOK BOOM
Drum diameter 390 mm / 15.3 in 390 mm / 15.3 in
Flange diameter 590 mm / 23.2 in 530 mm / 20.8 in
Drum length 330 mm / 13 in 360 mm / 14.1 in
Capacity (19 mm / 3/4 in) 125 m / 411 ft 75 m / 247 ft
Wire rope installed 120 m / 395 ft 70 m / 230 ft
Hook speed 0-16 m/min / 0-52 ft / min

Boom
Type 7.31 m / 24 ft welded box square section
Diameter wire rope 19 mm / 3/4 in
Minimum breaking strength rope 323 kN / 72,530 lb
Part load line 8
Part boom line 5

Adjustable counterweights
Removable counterweight leaves (CPX-594 & Cat 594H) 17 leaves 600 kg / 1,330 lb each
Total weight extendable 12,560 kg / 27,680 lb
Removable counterweight leaves (SP-594) 20 leaves 640 kg / 1,408 lb each
Total weight extendable 15,160 kg / 33,352 lb

COMPARISONS
SUPEROR SP-594 SUPERIOR CPX-594 CATERPILLAR 594H
Tractor
Flywheel Power 305 kW 410 hp 305 kW 410 hp 305 kW 410 hp
Track Gauge 2.28 m 89 in 2.54 m 100 in 2.54 m 100 in
Width of Std. Shoe 762 mm 30 in 860 mm 34 in 860 mm 34 in
Sideboom
Std. Boom Length 7.31 m 24 ft 7.31 m 24 ft 7.31 m 24 ft
SUPERIOR Optional Boom 8.5 m 28 ft 8.5 m 28 ft N/A N/A
Hyd. Tank Capacity 120 liters 32 gal 120 liters 32 gal N/A N/A
Wire Rope Diameter 19 mm 3/4 in 19 mm 3/4 in 19 mm 3/4 in
Load Line Parts 8 8 8 8 8 8
Boom Line Parts 5 5 5 5 5 5
Working Weight 55,100 kg 121,500 lb 55,100 kg 121,500 lb 55,100 kg 121,500 lb
Winch Specifications Lifting Capacity
24 ft / 7.32 m boom Maximum load capacity 45 ton

lb x Kg x
1000 1000
220 100
92
200 90
180 80
160 70

Lifting Capacity
140 Max. Lift Capacity S.A.E. J 743B
60 Max. Load Capacity ISO 8813
120
50
100 45 Yellow light turns on
40 when this curve is reached,
80 namely 15% before
30 max. lifting capacity
60
20
40
20 10 Working Range
ISO 8813
0
1 1.5 2 2.5 3 3.5 4 4.5 5 5.5 6 6.5 7 M
Ft
4 6 8 10 12 14 16 18 20 22 24
Boom Overhang
Main Pump
Type Bosch-Rexroth axial piston variable
displacement pump

Valves
REAR WINCH AVAILABLE
Type Bosch load-sensing mobile control block
proportional directional valves Max line pull 350 KN
Max capacity 286 liters/min - 75.5 U.S. gal/min Max line speed 0-30 m/min
Working pressure 320 bar - 4,642 p.s.i. 0-98.4 ft/min
Cable size 36 mm - 1.4 in
Control
Weight 2,800 kg - 6,173 lb
Type Pilot units for remote control of winch motors
DIMENSIONS
Progressive and sensitive operations
Drum diameter 530 mm - 20.9 in
Flange diameter
Service Pump 890 mm - 35 in
Type Gear pump Drum length 510 mm - 20 in
Max capacity 10 liters.min - 2.6 U.S. gal/min
Working pressure 30 bar - 435 p.s.i.
Features
Hydraulic Tank
CE approved design
Type Pressurized type Planetary gear
Max capacity 120 liters - 32 U.S. gal Automatic negative brakes
Anti-friction bearings
Filter
Type Donaldson FI0500
Max capacity 500 liters/min - 132 U.S. gal/
min
 HYDRAULIC SYSTEM OPTIONS
ALL HYDRAULIC
Freefall System
When the button is engaged, the load free-falls and then
immediately stops when the button is released.
IMPORTANT: Improper use of this feature may cause damage
to the winch. Read all documentation before use.
Boom Kick-Out System
This system will ensure you will never bend another boom.
Anti-Two Block
Sets a minimum distance between the top block and the hook
block, preventing collisions between them.

ELECTRONIC OVER HYDRAULIC

Freefall system, Boom kick-out system and
anti-two block plus:
Anti-Tipping System
Prevents tipping by calculating the maximum load
that can be lifted.

FEATURE SUPERIOR MIDWESTERN CATERPILLAR

Single lever control 4 8 8
Free-fall system 4 4 4
Vertical boom kick-out 4 4 4
Anti-two block 4 8 8
Anti-tipping system 4 8 8
CE compliance 4 8 4
SINGLE JOYSTICK CONTROLLER
SUPERIORS single lever control system allows the operator to control the load with
one fully-directional joystick for both the boom line and the load line. The operator
can activate both winches at the same time by positioning the joystick in different
diagonal positions for different desired effects. With light pressure applied, the opera-
tor can inch, or with maximum pressure applied and full throttle, can go full bore. No
gearing system is necessary, as our package will operate as efficiently as the two gear
systems used by our competitors.
DIMENSIONS
Operating weight 55,100 kg / 121,500 lb (SP & CPX)

G
B
F
E
A D

Feet Meters
A Overall length 18 ft 5.5 m
B Length of tracks on ground 11 ft 3.4 m
C Height to top of counterweight (retracted) 10.2 ft 3.1 m
D Overall width (counterweights extended) 18.3 ft 5.8 m
E Overall width (counterweights retracted) 13.4 ft 4.1 m
F Width of tracks 10.1 ft 3.1 m
G Width to center tracks 7.5 ft 2.3 m
AVAILABLE MODELS Contact Information
Europe
Phone +49.0.231.963.3073
pipelinece@wwmach.com

Russia, China and the Middle East

Phone +39.349.198.1281 Italy
SP-D5M/N LGP SP-D6M/N LGP Phone +7.495.507.4827 Russia
fsupipeline@wwmach.com

India
Phone +91.11.414.59230
pipelineind@wwmach.com

Africa
Intl. Toll Free 800.9675.3948
CPX-561 CPX-571
pipeline@wwmach.com

North America
Phone +1.281.457.4400
pipelinena@wwmach.com

Latin America
Phone +52.81.8.394.0160
pipelinesa@wwmach.com
SP/CPX-572 SP/CPX-583
Brazil
Phone 800.9675.3948
pipelinebr@wwmach.com

Australia
Phone +61.0.400.144.432
pipelinece@wwmach.com

SP/CPX-594

All information is subject to change without notice.

16031 East Freeway

Houston, TX 77530
Phone 281.457.4400 Fax 281.452.5455
U.S. Toll Free 800.383.2666 Intl. Toll Free 800.9675.3948
pipeline@wwmach.com
www.worldwidemachinery.com