EE-GATE-2014 PAPER-03|

Q.No. 1 5 Carry One Mark Each

1. While trying to collect an envelope from under the table, Mr. X fell down and
I II III
was losing consciousness.
IV
Which one of the above underlined parts of the sentence is NOT appropriate?
(A) I (B) II (C) III (D) IV
Answer: (D)

2. If she _______________ how to calibrate the instrument, she _______________ done the
experiment.
(A) knows, will have (B) knew, had
(C) had known, could have (D) should have known, would have
Answer: (C)

3. Choose the word that is opposite in meaning to the word coherent.

(A) sticky (B) well-connected (C) rambling (D) friendly
Answer: (C)

4. Which number does not belong in the series below?

2, 5, 10, 17, 26, 37, 50, 64
(A) 17 (B) 37 (C) 64 (D) 26
Answer: (C)

5. The table below has question-wise data on the performance of students in an examination.
The marks for each question are also listed. There is no negative or partial marking in the
examination.

No Marks Answered Answered Not

Correctly Wrongly Attempted
1 2 21 17 6
2 3 15 27 2
3 2 23 18 3
What is the average of the marks obtained by the class in the examination?
(A) 1.34 (B) 1.74 (C) 3.02 (D) 3.91
 EE-GATE-2014 PAPER-03|

Answer: (C)
Exp: Total question
442=88
443=132
144 = 88
132 308
Total marks obtained= (212) + (153) + (232) =133
Total Number of students=44
133
Average = = 3.02
44

Q.No. 6 10 Carry One Mark Each

6. A dance programme is scheduled for 10.00 a.m. Some students are participating in the
programme and they need to come an hour earlier than the start of the event. These students
should be accompanied by a parent. Other students and parents should come in time for the
programme. The instruction you think that is appropriate for this is
(A) Students should come at 9.00 a.m. and parents should come at 10.00 a.m.
(B) Participating students should come at 9.00 a.m. accompanied by a parent, and other
parents and students should come by 10.00 a.m.
(C) Students who are not participating should come by 10.00 a.m. and they should not bring
their parents. Participating students should come at 9.00 a.m.
(D) Participating students should come before 9.00 a.m. Parents who accompany them should
come at 9.00 a.m. All others should come at 10.00 a.m.
Answer: (B)

7. By the beginning of the 20th century, several hypotheses were being proposed, suggesting a
paradigm shift in our understanding of the universe. However, the clinching evidence was
provided by experimental measurements of the position of a star which was directly behind
our sun.
Which of the following inference(s) may be drawn from the above passage?
(i) Our understanding of the universe changes based on the positions of stars
(ii) Paradigm shifts usually occur at the beginning of centuries
(iii) Stars are important objects in the universe
(iv) Experimental evidence was important in confirming this paradigm shift

(A) (i), (ii) and (iv) (B) (iii) only (C) (i) and (iv) (D) (iv) only
Answer: (D)

8. The Gross Domestic Product (GDP) in Rupees grew at 7% during 2012-2013. For
international comparison, the GDP is compared in US Dollars (USD) after conversion based
on the market exchange rate. During the period 2012-2013 the exchange rate for the USD
increased from Rs. 50/ USD to Rs. 60/ USD. Indias GDP in USD during the period 2012-
2013
(A) increased by 5 % (B) decreased by 13%
(C) decreased by 20% (D) decreased by 11%
 EE-GATE-2014 PAPER-03|

Answer: (D)
Exp: Per 100 Rs final value 107 Rs
100 107
Per Dollars final value
50 60
for 100 dollars____?
100 50 107
= = 89.16
100 60
Discrased by 11%.

9. The ratio of male to female students in a college for five years is plotted in the following line
graph. If the number of female students in 2011 and 2012 is equal, what is the ratio of male
students in 2012 to male students in 2011?

Ra 3.5
tio
of 3
m 2.5
al 2
e 1.5
to
1
fe
m 0.5
al 0
2008 2009 2010 2011 2012

(A) 1:1 (B) 2:1 (C) 1.5:1 (D) 2.5:1

Answer: (C)
Exp: Take number of female students in 2011=100
Number of male in 2011=100
No. of female in 2012=100
No. of male in 2012=150
150
ratio =
100

10. Consider the equation: (7526)8 - (Y)8 = (4364)8 , where (X) N stands for X to the base N. Find
Y.
(A) 1634 (B) 1737 (C) 3142 (D) 3162
Answer: (C)
Exp: ( 7526 )8 ( y )8 = ( 4364 )8
y8 = ( 7526 )8 ( 4364 )8
( 8+ 2 =10 )
4
7 5 2 6
4 3 6 4
3 1 4 2
When we have base 8, we borrow 8 instead of 10 as done in normal subtraction
 EE-GATE-2014 PAPER-03|

Q.No. 1 25 Carry One Mark Each

1. Two matrices A and B are given below:

p q p 2 + q 2 pr + qs
A= ; B= 2
pr + qs r + s
2
r s
If the rank of matrix A is N, then the rank of matrix B is
(A) N /2 (B) N-1 (C) N (D) 2 N
Answer: (C)
Exp: Rank of a matrix is unaltered by the elementary transformations i.e., Row/column operations
(Here B is obtained from A by applying row/column operations on A)
Since rank of A is N
rank of B is also N

2. A particle, starting from origin at t = 0 s, is traveling along x-axis with velocity

v= cos t m / s
2 2
At t = 3 s, the difference between the distance covered by the particle and the magnitude of
displacement from the origin is _________.
Answer: 2
Exp: At t = 3s , the distance covered by the particle is 1 + 1 + 1 = 3m and displacement from the
origin is 1
difference between the distance covered by the particle and the magnitude of displacement
from the origin is 3 1 = 2

3. Let, ( f v ) = x 2 y + y 2 z + z 2 x; where f and v are scalar and vector fields respectively. If

v = yi + zj + xk, then v = f is

(A) x 2 y + y 2 z + z 2 x (B) 2xy + 2yz + 2zx (C) x + y + z (D) 0

Answer: (A)




Exp: .( f v ) = f ( .v ) + f.v .....(1)


Now .v = 0 + 0 + 0 = 0


(1) becomes x 2 y + y 2 z + z 2 x = f ( 0 ) + v.f


v.f = x 2 y + y 2 z + z 2 x

4. Lifetime of an electric bulb is a random variable with density f(x) = kx2, where x is measured
in years. If the minimum and maximum lifetimes of bulb are 1 and 2 years respectively, then
the value of k is ________.
 EE-GATE-2014 PAPER-03|

Answer: 0.43
Exp: f ( x ) = kx 2 , 1 < x < 2 and f ( x ) = 0, otherwise sin ce f ( x ) is a p.d.f
2
x3
f ( x ) dx = 1 k = 1
2

1
3 1
k = 3 = 0.428  0.43
7

5. A function f(t) is shown in the figure.

f (t)

1/ 2

T/ 2
T / 2 0 t

1/ 2

The Fourier transform F ( ) of f(t) is

(A) real and even function of (B) real and odd function of
(C) imaginary and odd function of (D) imaginary and even function of
Answer: (C)
Exp; Since f(t) is odd and real
f ( t ) = f ( t )

 F ( ) is imaginary and odd [symmetry property of fourier Transform]

6. The line A to neutral voltage is 10 15O V for a balanced three phase star-connected load
with phase sequence ABC. The voltage of line B with respect to line C is given by
( A) 10 3 1050 V ( B) 10 1050 V

( C) 10 3 75O V ( D) 10 3 90O V
Answer: (C)
Exp: VL = 3 Vph VA
VC
= 3 10 = 10 3
60
If VA = 10 0
30
then VBC = 10 3 90 120 VBC
given VA = 10 15 o

VBC = 10 3 90 + 15 = 10 3 75
VC VB
 EE-GATE-2014 PAPER-03|

7. A hollow metallic sphere of radius r is kept at potential of 1 Volt. The total electric flux
coming out of the concentric spherical surface of radius R ( > r) is
( A ) 4 0 r ( B) 4 0 r 2 ( C) 4 0 R ( D ) 4 0 R 2
Answer: (A)

8. The driving point impedance Z(s) for the circuit shown below is

1H 1H

Z ( s) 1F 1F

s4 + 3s2 + 1 s 4 + 2s 2 + 4 s2 + 1 s3 + 1
( A) ( B) (C) ( D)
s3 + 2s s2 + 2 s4 + s2 + 1 s4 + s2 + 1
Answer: (A)
Exp: S-Domain representation of the given circuit.

1 1 S S
s+
s s
Z (s ) = s + 1
1
1 1
+ s + s
s
s s
s 4 + 3s 2 + 1 Z(s)
Z (s ) =
s3 + 2s

9. A signal is represented by
1 t <1
x ( t) =
1 t <1
The Fourier transform of the convolved signal y(t)=x(2t)*x(t/2) is
4 4
( A) sin sin ( 2 )
2
( B) sin
2
2
2

4 4
( C) sin ( 2 ) ( D) sin 2
2 2

Answer: (A)
Exp:
x(t)
t t
x ( t ) = rect = rect
2
t F 1
rect sa
2
t F 2sin t
x ( f ) = rect 2 sa ( ) = 1 +1
2 =2
By using the scaling property of Fourier transforms,
 EE-GATE-2014 PAPER-03|

sin
1
F{x ( 2t )} = F rect ( t ) = 2 sa = 2
2 2

2
t t 4sin 2
Similarly, F x = F rect = 2 2sa ( 2) =
2 4 2
t
The convolved signal y ( f ) = x ( 2t ) x
2

t sin 2 4sin 2 4
F y ( t ) = F x ( 2t ) F x = = 2 sin sin ( 2)
2 2 2
2

10. For the signal f ( t ) = 3 sin 8t + 6sin12t + sin14 t, the minimum sampling frequency (in
Hz) satisfying the Nyquist criterion is _________.
Answer: 14 sample / sec
Exp: Maximum frequency content in 7Hz
Nyquist rate = 2 7 = 14 sample / sec

11. In a synchronous machine, hunting is predominantly damped by

(A) mechanical losses in the rotor (B) iron losses in the rotor
(C) copper losses in the stator (D) copper losses in the rotor
Answer: (D)
Exp: In a synchronous machine the hunting will be damped by the copper losses in the rotor

12. A single phase induction motor is provided with capacitor and centrifugal switch in series
with auxiliary winding. The switch is expected to operate at a speed of 0.7 Ns, but due to
malfunctioning the switch fails to operate. The torque-speed characteristic of the motor is
represented by

Torque Torque

( A) ( B)

0.7Ns NS 0.7Ns NS
Speed Speed

Torque Torque

( C)

(D)
0.7Ns NS 0.7Ns NS
Speed Speed
 EE-GATE-2014 PAPER-03|

Answer: (C)
Exp: In 1 induction motor the centrifugal switch is expected to operate at 0.7 N S but it fails to
operate.
Then there is no increase in the torque after 0.7 N S Hence (C) is correct

13. The no-load speed of a 230 V separately excited dc motor is 1400 rpm. The armature
resistance drop and the brush drop are neglected. The field current is kept constant at rated
value. The torque of the motor in Nm for an armature current of 8 A is ____________.
Answer: 12.5Nm
Exp: Given, V = 230 V, N = 1400 rpm
Ra = 0 Ia = 8A
V.Ia 230 8
Torque, T = = = 12.5 Nm
W 2 1400
60
14. In a long transmission line with r,l,g and c are the resistance, inductance, shunt conductance
and capacitance per unit length, respectively, the condition for distortionless transmission is
( A) rc = lg ( B) rc = l/ c ( C) rg = lc ( D) g = c/l
Answer: (A)
R G
Exp For distortionless transmission line, = RC = GL
L C

15. For a fully transposed transmission line

(A) positive, negative and zero sequence impedances are equal
(B) positive and negative sequence impedances are equal
(C) zero and positive sequence impedances are equal Ia
a
2s
(D) negative and zero sequence impedances are equal
Answer: (B) 2m 2m
b Ib
Exp: Where Zn neutral impedance 2s
Va '
ZS Self impedance 2m
Va Ic
c
Zm mutual impedance 2s
Vb '
Let Z0 zero sequence impedance Vb
VC VC '
Z1 + ve sequence impedance
Z2 ve sequence impedance
Z0 00 Zs + 2Zm + 3Zn 0 0

Z012 = 0Z1 0 = 0 Zs Z m 0
Zn
In = Ia + Ib + Ic
00 Z2 0 0 Zs Z m
1 = Z2 = Zs Z m
 EE-GATE-2014 PAPER-03|

16. A 183-bus power system has 150 PQ buses and 32 PV buses. In the general case, to obtain
the load flow solution using Newton-Raphson method in polar coordinates, the minimum
number of simultaneous equations to be solved is ___________.s
Answer: 332
Exp: No of load | PQ buses = 150
No of generator |PV buses =32
Minimum no of simultaneous equations = 2 150 + 32 = 332

17. The signal flow graph of a system is shown below. U(s) is the input and C(s) is the output
h1

1 1
h0 1 1 s 1
C ( s)
s
U ( s)

a1

a 0 C ( s)
Assuming, h1 = b1 and h0 = b0 b1 a1, the input-output transfer function, G(s) = of the
U ( s)
system is given by
b0s + b1 a1s + a 0
( A) G ( s) = ( B) G ( s) =
s 2 + a 0s + a 1 a 2 + b1s + b0
b1s + b0 a 0s + a 1
( C) G ( s) = ( D) G ( s) =
a + a1s + a 0
2
a + b0s + b1
2

Answer: (C)
C (s)
Exp: From the signal flow graph, G ( s ) =
U (s)

By masons gain relation,

P11 + P2 2 + ...
Transfer function =

h1 h
P1 = ; P2 = o
S s2

a a1 a 0
1 = 1 + 1 ; 2 = 1 ; =1+ +
s s s2
h1 a 1 b 0
1+ + 2
s b s + b0
Transfer function =
s s
= 2 1
a1 a 0
1+ + 2 s + a1s + a 0
s s
 EE-GATE-2014 PAPER-03|

18. A single-input single-output feedback system has forward transfer function G(s) and feedback
transfer function H(s) It is given that | G(s).H(s)|<1. Which of the following is true about the
stability of the system?
(A) The system is always stable
(B) The system is stable if all zeros of G(s).H(s) are in left half of the s-plane
(C) The system is stable if all poles of G(s).H(s) are in left half of the s-plane
(D) It is not possible to say whether or not the system is stable from the information given
Answer: (A)
19. An LPF wattmeter of power factor 0.2 is having three voltage settings 300 V, 150 V and 75
V, and two current settings 5 A and 10 A. The full scale reading is 150. If the wattmeter is
used with 150 V voltage setting and 10 A current setting, the multiplying factor of the
wattmeter is _________.
Answer: 2
Exp: In LPF wattmeter, Td on the moving system is small owing to low power factor even when
the current and potential coils are fully excited. Also the errors introduced due to inductance
of pressure coil tend to be large at low power factors. So for calculating multiplying factor for
a low p.f. wattmeter, p.f. mentioned on the wattmeter should be taken into account.
Therefore,
Multiplying Factor = (Current range used*Voltage range used*p.f)/Power at FSD
Given, Power at Full scale reading = 150
Current Range used = 10 A
Voltage Range used = 150 V
Power Factor = 0.2
10 150 0.2
Therefore, m = =2
150

20. The two signals S1 and S2, shown in figure, are applied to Y and X deflection plates of an
oscilloscope.
1 S1
1 S2
v V
T 2T
T 2T
t t

The waveform displayed on the screen is Y

Y 1
( A) 1 ( B)
X
X

1
1
 EE-GATE-2014 PAPER-03|

Y
Y
1
1
( D)
( C)
X
X

1
1

Answer: (A)
Exp: S2
S1
+1 +1

T
t t
0

1
1

X Y mode Vector sum (in X-Y mode)

y
1
Points Y( s1 ) X (s2 ) x 2 + y2 = 100 1

A 0 1 1 0

1 1 x B 1 1 2 45

C 0 0 0 0

1
D 1 1 2 225o

21. A state diagram of a logic gate which exhibits a delay in the output is shown in the figure,
where X is the dont care condition, and Q is the output representing the state.
0x /1. 10 /1

11/ 0 Q=0 Q =1 0x /1.10 /1

11/ 0
The logic gate represented by the state diagram is
(A) XOR (B) OR (C) AND (D) NAND
 EE-GATE-2014 PAPER-03|

Answer: (D)
Exp: True Table
A B Y Q
1 1 0 0
0 0 1 1
0 1 1 1
1 0 1 1
1 1 0 0
If you will observe this true table corresponding to state diagram, then if any input is 0 output
is 1 and if all the inputs are one output is zero it means it corresponds to NAND gate.

22. An operational-amplifier circuit is shown in the figure.

R
+ Vsat
R
+ Vsat
Vi
+ Vo
+ Vsat
Vsat
R2
R1

The output of the circuit for a given input vi is

R R R2
( A) 2 vt ( B) 1 + 2 v t ( C) 1 + R v t ( D) + Vsat or Vsat
R1 R1 1

Answer: (D)
Exp: Output of first Op-Amp is + Vsat
2nd Op-Amp circuit is non-inverting amplifier
R
V0 = 1 + Vsat > Vsat
R
V0 = Vsat

23. In 8085A microprocessor, the operation performed by the instruction LHLD 2100H is

( A ) ( H ) 2IH , ( L ) 00H
( B) ( H ) M ( 2I00H ) , ( L) M ( 2101H )
( C) ( H ) M ( 2I01H ) , ( L) M ( 2100H )
( D ) ( H ) 00H , ( L ) 21H
Answer: (C)
 EE-GATE-2014 PAPER-03|

Exp: Instruction given is:

LHLD 2100H
The operation performed by this instruction is load HL register pair from the specified
address in the instruction, directly. HL register pair is required 2-Byte data, but in 8085 at one
address it contains only one-byte data, so this instruction will access two memory locations.
So, first byte address (i.e., 2100H) is mentioned in instruction itself and by default second
byte data is accessed from the next location (i.e., 2101H). Lower address data will be copied
to lower byte ( i.e., ( L ) M ( 2100H ) ) and higher address data will be copied to higher byte
(i.e, ( H ) M ( 2101H ) )

24. A non-ideal voltage source VS has an internal impedance of ZS If a purely resistive load is to
be chosen that maximizes the power transferred to the load, its value must be
(A) 0 (B) real part of Zs
(C) magnitude of Zs (D) complex conjugate of Zs
Answer: (C)

Exp: For minimum power transferred to the load, jx s

Its value must be R L = Zs Rs

Vs RL

R L = R S2 + XS2

25. The torque-speed characteristics of motor ( TM ) and load ( TL ) for two cases are shown in the
figures (a) and (b). The load torque is equal to motor torque at points P, Q, R and S
TM
Speed TL
Speed S
Torque
P
R
Q
TL Torque
(a) ( b)
The stable operating points are
(A) P and R (B) P and S (C) Q and R (D) Q and S
Answer: (B)
Exp: From the given torque speed characteristics of motor ( Tm ) and load ( TL ) at the points P and
S the motor stable. Since at low value of slip the motor is stable.
 EE-GATE-2014 PAPER-03|

Q.No. 26 55 Carry Two Marks Each

z2
26. Integration of the complex function f ( z ) = , , in the counterclockwise direction, around
z2 1
z 1 = 1, is
(A) i (B) 0 (C) i (D) 2 i
Answer: (C)
Exp:
Z = 1,1 are the simple poles of f ( z ) and z = 1 lies inside C : z 1 = 1

 f ( z ) dz = 2 i Res f ( z )
C z =1
= 2 i Lt ( z 1) .f ( z )
z 1
z
2
= 2 i Lt = i
z 1 z + 1

27. The mean thickness and variance of silicon steel laminations are 0.2 mm and 0.02
respectively. The varnish insulation is applied on both the sides of the laminations. The mean
thickness of one side insulation and its variance are 0.1 mm and 0.01 respectively. If the
transformer core is made using 100 such varnish coated laminations, the mean thickness and
variance of the core respectively are
(A) 30 mm and 0.22 (B) 30 mm and 2.44
(C) 40 mm and 2.44 (D) 40 mm and 0.24
Answer: (D) [Key form IIT website]
Exp: mean thickness of silicon steel laminations= 0.2 mm
variance of silicon steel lamination = 0.02
Vanish insulation applied both sides of laminations
Mean thickness of one side insulation=0.1 mm
variance of one side insulation=0.01
Transformer core made with 100 vanish coated laminations
Mean thickness of two side insulation applied to core
=20.1=0.2mm
mean thickness of one lamination
= mean thickness of silicon steel + mean thickness of two side insulation
= 0.2+0.2=0.4 mm
100 laminations are using so
Mean thickness of core=0.4100=40 mm
To find thickness of each lamination
From variance
( d1 0.2 ) + ( d 2 0.2 ) + ...(d100 0.2) 2  2
(x x)
2 2

= 0.02 Varience =
100 n
 EE-GATE-2014 PAPER-03|

All have same thickness

100 (d 0.2) 2
= 0.02
100
(d-0.2)=0.1414
Each lamination d=0.3414mm
Thickness
Similarly
(x1 0.1)2 + ... + (x100 0.1)2
= 0.01
100
Each side lamination is equal (Assume)
100 (x 0.1) 2
= 0.01
100
x 0.1 = 0.1
Each side x=0.2 mm
Insulation thickness
Two side insulation thickness =0.4 mm
Each lamination (insulation = 0.3414 + 0.4

+ si steel) thickness = 0.7414 mm
Variance of overall core
100 (0.7414 0.4)2
= = 0.1166
100
mean thickness & variance of the core=40mm and 0.1166
[No option is matching]

28. The function f ( x ) = e x 1 is to be solved using Newton-Raphson method. If the initial value
of x0 is taken as 1.0, then the absolute error observed at 2nd iteration is __________.
Answer: 0.06
Exp: Clearly, x = 0 is a root of the equation f ( x ) = ex 1 = 0
f ' ( x ) = ex and x 0 = 1.0
f ( x0 ) ( e 1) = 1
Using Newton raphson method, x1 = x 0 =1
f ( x0 )
'
e e

and x 2 = x1 1
f ( x1 )
1
=
(e 1) = 1 + 1 1 = 0.37 + 0.69 1 = 0.06
1
e

f ( x1 ) e 1
e e e e 1e
absolute error at 2nd iteration is 0 0.06 = 0.06
 EE-GATE-2014 PAPER-03|

29. The Nortons equivalent source in amperes as seen into the terminals X and Y is _______.
2.5
X
2.5

5
5 5

5V
Y

2.5 V
Answer: 2 [Key form IIT website] X

2.5

Exp:
5

5
5

5V
Y
2.5 V
X
+ X
2.5 5
2.5 5 + 5V
5 Isc
+
2.5 V
5
ISC ( I N ) = Y
Y
5
ISC = 1A
[Answer is not matching]

30. The power delivered by the current source, in the figure, is ________.
1V
+
1 1

1V +
2A
1
1V
+
Answer: 3 Watts Vx
Exp: KCL at node Vx:
1 1
1 Vx V
+2= x +
1V 2A 1
1 1
Vx = 1.5V
Power delivered by current source is = 2 1.5 = 3 watts
 EE-GATE-2014 PAPER-03|

31. A perfectly conducting metal plate is placed in x-y plane in a right handed coordinate system.
A charge of +32 0 2 columbs is placed at coordinate (0, 0, 2). 0 is the permittivity of free
space. Assume l, j, k to be unit vectors along x, y and z axes respectively. At the coordinate .
( )


2, 2, 0 , the electric field vector E (Newtons/Columb) will be
32n 0 2
z columbs
( A) 2 2 k y Perfectly conducting
metal plate

( B) 2 k ( 2, 2, 0 )
( 0,0,0)
( C) 2 k

( D) 2 2 k

Answer: (B) Z

Exp: (0,0,2 ) Q

( 2, 2,0 )
X
X

(0,0, 2 ) Q

1 Q1R 1 Q 2 R 2
E = E1 + E 2 = +
4 0 R 13 R 23
R1 = ( )
2, 2,0 ( 0,0,2 )

R 1 = 2 a x + 2 a y 2a z
Q 2 = Q1
R2 = ( )
2, 2,0 ( 0,0, 2 )

= 2 a x + 2 a y + 2a z

E=
1 Q1
4 0 16 2
( 2 a x + 2 a y 2a z ) Q1
16 2
( )
2 a x + 2 a y + 2a z

Q 32 2 0
= [ 4a z ] = ( a z )
16 2 4 0 16 2 0
E = 2a z
 EE-GATE-2014 PAPER-03|

32. A series RLC circuit is observed at two frequencies. At 1 = 1k rad / s, we note that source
voltage V1 = 10000 V results in current I1 = 0.0331O A. At 2 = 2 krad/s, the source
voltage V2 = 1000o V results in a current I 2 = 20o V A. The closest values for R,L,C out
of the following options are
( A ) R = 50; L = 25mH;C = 10F; ( B) R = 50;L = 10 mH;C = 25F;
( C ) R = 50;L = 50 mH;C = 5F;a ( D ) R = 50; L = 5 mH;C = 50F;
Answer: B
Exp: Given V1 = 100 0o V; I1 = 0.03 31o at 1 = 1000 r sec
V2 = 100 0o V; I 2 = 2 0o at 2 = 2000 r sec
2 100
i.e. R= = 50
I2 2
v1 100 0o
Z= R + j( X L X C )
I1 0.03 31o
X XC
= 31o tan 1 L
R
X XC
tan 31o = L
R
1
1L
1c
tan 31o =
R
1 1
1L = 0.600 50 1L = 30.04 q .(1)
1C 1C
1
2 L =0 .(2)
2 C
1 = 1000 r / sec ; 2 = 2000 r / sec
from 1 and 2,C = 25F
L = 10mH

33. A continuous-time LTI system with system function H ( ) has the following pole-zero plot.
For this system, which of the alternatives is TRUE?

( A) H ( 0) > H ( ) ; ( ) > 0 X O
2
( B) H ( ) has multiple max ima,at 1 and 2 O X
1
( C) H ( ) < H ( ) ; ( ) > 0
( 0, 0 )

O X
( D) H ( ) = cons tan t; < <
Answer: (D) X O
 EE-GATE-2014 PAPER-03|

Exp: The transfer function can be written as j

( s z1 )( s z1 *)( s z 2 )( s z 2 *)
H (s ) = K
p2 z1
( s p1 )( s p1 *)( s p2 )( s p 2 *)
H ( j ) z2 p1

2 + z1 2 + z1 2 + z 2 2 + z 2
2 2 2 2
p1 *
=K z2 *
s + p1 + p1 + p2 + p2
2 2 2 2 2 2 2 2

from figure z1 = p 2 p2 *
z1 *

z 2 = p1
( H ( j) ) = K [ cons tan t ]

34. A sinusoid x(t) of unknown frequency is sampled by an impulse train of period 20 ms. The
resulting sample train is next applied to an ideal lowpass filter with a cutoff at 25 Hz. The
filter output is seen to be a sinusoid of frequency 20 Hz. This means that x(t) has a frequency
of
(A) 10 Hz (B) 60 Hz (C) 30 Hz (D) 90 Hz
Answer: (C)
Exp: Sampling rate 50Hz
Let x(t) has a frequency of fx Hz,
fx fx f
After sampling with 50Hz
Spectrurm will be

LPF of cut off = 25Hz

(50 + fx ) fx2 5 2J
output = 20Hz 50 + fx
50 + fx fx
50 f x = 20 50 fx

f x = 30Hz

35. A differentiable non constant even function x(t) has a derivative y(t), and their respective
Fourier Transforms are X ( ) and Y ( ) . Which of the following statements is TRUE?
(A) X ( ) and Y ( ) are both real. (B) X ( ) is real and Y ( ) is imaginary.
(C) X ( ) and Y ( ) are both imaginary. (D) X ( ) is imaginary and Y ( ) is real.
Answer: (B)
d
Exp: y(t) = x (t)
dt

Y ( ) = j ( )
if X ( ) is real, Y ( ) is imaginary
 EE-GATE-2014 PAPER-03|

36. An open circuit test is performed on 50 Hz transformer, using variable frequency source and
keeping V/f ratio constant, to separate its eddy current and hysteresis losses. The variation of
core loss/frequency as function of frequency is shown in the figure
15

Pc / f 10
( W / Hz )
5

25 50
f ( Hz )

The hysteresis and eddy current losses of the transformer at 25 Hz respectively are
(A) 250 W and 2.5 W (B) 250 W and 62.5W
(C) 312.5 W and 62.5 W (D) 312.5 W and 250 W
Answer: (B)
15
Exp: Given 50Hz transformer
PC
v f
Here ratio maintains constant
f

Wn = Af ; We = B f 2 10

5
where, A = 10 & B = tan = = 0.1 5
50
Wn at 25Hz = 10 25 = 250 W
25 50 f
We at 25Hz = 0.1 ( 25 ) = 62.5 W
2

37. A non-salient pole synchronous generator having synchronous reactance of 0.8 pu is

supplying 1 pu power to a unity power factor load at a terminal voltage of 1.1 pu. Neglecting
the armature resistance, the angle of the voltage behind the synchronous reactance with
respect to the angle of the terminal voltage in degrees is ________.
Answer: 33.61o
Exp: Given, P = 1 P.u; Vt = 1.1 P.u; Xs = 0.8 P.u
Pf = 1.
P 1
Ia = = = 0.91
V cos 1.1 1

E= ( V cos + Ia R a ) + ( V sin + Ia X s )
2 2

E= (1.1 1 + 0 ) + ( 0 + 0.91 0.8 ) = 1.314 V

2 2

EV
From power equation, P = sin
Xs
1.314 1.1
1= sin = 33.61o
0.8
 EE-GATE-2014 PAPER-03|

38. A separately excited 300 V DC shunt motor under no load runs at 900 rpm drawing an
armature current of 2 A. The armature resistance is 0.5 and leakage inductance is 0.01 H.
When loaded, the armature current is 15 A. Then the speed in rpm is _____
Answer: 880 rpm
Exp: Given 300V1
N1 = 900rpm
R a = 0.5
Ia1 = 2A; Ia 2 = 15A
Eb1 = 300 2 0.5 = 299V
Eb 2 = 300 15 0.5 = 292.5V
N 2 Eb 2 2925
= N 2 = 900 = 880 rpm
N1 Eb1 29

39. The load shown in the figure absorbs 4 kW at a power factor of 0.89 lagging.
1
2 :1

50 Hz ~ x 110 V ZL
ac source

Assuming the transformer to be ideal, the value of the reactance X to improve the input
power factor to unity is ___________.
Answer: 24
Exp: Given, V2 = 110
Load power, P2 = 4 kW
pf = cos 2 = 0.89
load power 4000
I2 = = = 40.858 A
V2 cos 2 110 0.89
primary current, I1 = K I 2
N 1
= 2 I2 = 40.858
N1 2
= 20.429 A
to improve input power factor units,
V12
Reactive power = =
X
V12 2202
Reactance, X= = = 23.6.
220 20.429 sin ( 27 )
 EE-GATE-2014 PAPER-03|

40. The parameters measured for a 220V/110V, 50 Hz, single-phase transformer are:

Self inductance of primary winding = 45 mH

Self inductance of secondary winding = 30 mH
Mutual inductance between primary and secondary windings = 20 mH

Using the above parameters, the leakage (Ll1 , Ll2) and magnetizing (Lm) inductances as
referred to primary side in the equivalent circuit respectively, are
(A) 5mH, 20mH and 40mH (B) 5mH, 80mH and 40mH
(C) 25mH, 10mH and 20mH (D) 45mH, 30mH and 20mH
Answer: (B)
Exp: Given, 220/110v, 50Hz.
L1 = 45mH, L 2 = 30mH
M=20 mH.
Leakage inductancy are,
Ll1 = L1 2(m) = 45 2(20)
= 5 mH
Ll2 = L 2 2(m)
= 30 2(20) = 10 mH
But refered to primary,
30
Ll'2 = 2
2(20)
1

2
= 120 40 = 80mH

41. For a 400 km long transmission line, the series impedance is ( 0.0 + j0.5) / km and the shunt
admittance is (0.0 + j5.0) mho / km . The magnitude of the series impedance (in O) of the
equivalent p circuit of the transmission line is ________.
Answer: 186.66
Exp: For a long transmission line,
yz yz
1+ z 1 +
AB 2 6
CD =
y 1 + yz yz
1+
6 2
Where z= total series impedance = j0.5 / km 400 km = j200

y = j5s 106 / km = j5 106 400s = j2 103 simen

ABCD parameters of a circuit is
 EE-GATE-2014 PAPER-03|
Z

AB 1 + y 2 z z
CD = y + y + y y z
y1 y2

1 2 1 2 1 + y1z

1 + yz
Z = B = Z
6
(
( j200 ) j2 103
= j200 1 +
)
6

1 0.4
= j200 = j186.66
6

42. The complex power consumed by a constant-voltage load is given by (P1 + jQ1) where,
1kW P1 1.5kW and 0.5kVAR Q1 1kVAR
A compensating shunt capacitor is chosen such that Q 0.25kVAR where Q is the net
reactive power consumed by the capacitor-load combination. The reactive power (in kVAR)
supplied by the capacitor is _________.
Answer: 0.75
Exp: Net reactive power consumed by capacitor-load combination is 0.25 KVAR.
Reactive power required for load is 1KVAR
Reactive power supplied by capacitor is 0.75 KVAR.

43. The figure shows the single line diagram of a single machine infinite bus system.

Infinite
bus
The inertia constant of the synchronous generator H =5 MW-s/MVA. Frequency is 50 Hz.
Mechanical power is 1 pu. The system is operating at the stable equilibrium point with rotor
angle equal to 30O. A three phase short circuit fault occurs at a certain location on one of
the circuits of the double circuit transmission line. During fault, electrical power in pu is Pmax
sin If the values of and d /dt at the instant of fault clearing are 45O and 3.762 radian/s
respectively, then Pmax (in pu) is _______.
Answer: 0.24
Exp: Given, H = 5 MW S
MVA
f = 50 Hz
Pm =1pu
0 = 30
At the instant of fault clearing,
 EE-GATE-2014 PAPER-03|

d
= 45 ; = 3.762 rad / s
dt
d 2 1
= [ p m p3 ]
dt 2 M
1
d 2 2
d ds d d
2 2
= ( pm pe ) ds
dt
= 2 2
dt dt
dt M 0 dt
1
2 45
2
=
H f
30 (1 p max sin ) ds
1
2 50
( + p max cos )30
2
3.762 =
45

5
14.152 = 20 { ( 45 30 ) + p max ( cos 45 cos30 )}
p max = 0.24 p.u

44. The block diagram of a system is shown in the figure

+
()
Rs +
1
+ G ( s) s C ( s)
s

If the desired transfer function of the system is

C (s ) s
=
R (s ) s + s +1
2

then G(s) is
s
(A) 1 (B) s (C) 1/s ( D)
s +s s2
3 2

Answer: (B)
Exp:
+
R(s) + 1
G(s) S C(s)
s

If G ( s ) = S.

C(s) S
=
R (s) s +s+2
2
 EE-GATE-2014 PAPER-03|

45. Consider the system described by following state space equations

x 1 0 1 x1 0 x1
x = 1 1 x + 1 u; y = [1 0] x
2 2 2
If u is unit step input, then the steady state error of the system is
(A) 0 (B) 1/2 (C) 2/3 (D) 1
Answer: (A)
Transfer function C [SI A ] .B.
1
Exp:
1
S 1 0
= [1 0]
1 ( s + 1) 1
1
Transfer function =
s + s +1
2

G (s) 1
=
1 + G (s) s + s +1
2

1
G (s) =
s2 + s
Steady state error for unit step
A
ess =
1 + Kp
1
ess =
1 + lim G ( s )
s0

1
ess =
1
1 + lim
s0 s +s2

1
ess =
1+
ess = 0

46. The magnitude Bode plot of a network is shown in the figure

Slope 20 dB / decade
G ( j )
dB

0
1 1 log10
3
The maximum phase angle .m and the corresponding gain Gm respectively, are
( A) 30O and 1.73dB ( B) 30O and 4.77dB
( C) + 30O and 4.77dB ( D) + 30O and 1.73dB
 EE-GATE-2014 PAPER-03|

Answer: C

Exp: G ( s ) = k.
(1 + 3s )
(1 + s )
1
3k. s +
G (s) = 3
( )
s + 1

Here k = 1

1 1 1
= =1
T 3 T

m = 1 ; = 1
3 3

4
G ( s ) = 1 = 3
3 4
3

Gm in dB
= 20log 3 = 4.77 dB

1
m = sin 1
1 +

1 1
= 1 = sin 1 3 = sin 1 1
3
1 + 1 2
3

m = 30o

47. A periodic waveform observed across a load is represented by

1 + sin t 0 t < 6
V ( t) =
1 + sin t 6 t < 12

The measured value, using moving iron voltmeter connected across the load, is

3 2 3 2
( A) ( B) ( C) ( D)
2 3 2 3

Answer: (A)
Exp: M.I instrument reads RMS value
2
= (1) + 1 = 1+ 1 3
2

2 2 2
 EE-GATE-2014 PAPER-03|

48. In the bridge circuit shown, the capacitors are loss free. At balance, the value of capacitance
C1 in microfarad is _________.

35k C1

Vsin ( t ) G
0.1 F
105k

Answer: 0.3 F
Exp: Bridge is balanced
z1z 4 = z 2 z3
1 1
35k. = 105k.
j0.1F jc1
C1 = 0.3 F

49. Two monoshot multivibrators, one positive edge triggered ( M1 ) and another negative edge
triggered ( M 2 ), are connected as shown in figure
+5V

10k M1 M2
Q1 Q2 Vo
Q1 Q1
10F

The monoshots M1 and M2 when triggered produce pulses of width T1 and T2 respectively,
where T1>T2. The steady state output voltage vo of the circuit is
Vo
( A) T1 T2 T1 T2 T1

( B) Vo
T1 T1 T1 T1

( C) Vo
T2 T1 T2 T1 T2

t
Vo
( D) T2 T2 T2 T2 T2 T2

t
 EE-GATE-2014 PAPER-03|

Answer: (C)
Exp: 10 k V2 (t) M1 Q1 (t) M2

+ (5 V) Q1 Q2 V0 (t)

10 F Q2
Q1

V2 (t) =

5V

5 = 50sec t

given M1 mono-stable multivibrator generates pulse width T1.

T1

M2 mono-stable multivibrator generates public width T2.

(Because T1 > T2 )
T2

(1) Assume Initially if Q 2 = 1 (high state), then Q 2 =0 (low state)

Then output of AND gate is low, M1(multi vibrator) it does not generates pulse width
T1(Because it is positive edge triggered),

(2) Output (Q2), after T2 duration , it is low (comes to stable state then Q 2 is high, the output
of And gate is high now, then M1 multivibrator generates pulse width T1 (Because it
positive edge triggered), At this time Q2 does not generates pulse width T2 (Because it
negative edge Triggered) then,at the end of T1 pulse, M2 multi vibrator generates T2
pulse width (Because it is negative edge triggered)
 EE-GATE-2014 PAPER-03|

(1)
Q 2 (t) = V0 (c)

T2

Q1 (t)

T1

Then again Q 2 (t) is high at the end of T1 pulse

Q 2 (t)

T2

Overall output wave form

T1 T2
So ......on
T2

50. The transfer characteristic of the Op-amp circuit shown in figure is

R

R
+ V sat
R + Vsat
Vi R

+
V sat + Vo
R Vsat
R
 EE-GATE-2014 PAPER-03|

( A) ( B)
V0 V0 1
1

Vi
Vi

( C) ( D)
V0
V0
Vi
Vi 1
1

Answer: (C) V0
Exp:
When Vi > 0; V0 = 0 slope = 0
When Vi < 0; V0 = Vi slope = 1 Slope = 0
Vi
Transfer characteristics are
Slope = 1

51. A 3-bit gray counter is used to control the output of the multiplexer as shown in the figure.
The initial state of the counter is 0002. The output is pulled high. The output of the circuit
follows the sequence
A2
3 bit gray A
1
counter A + 5V
0

S0 S1
E R
I0 0 4 X1
I1 1
I2 2 MUX Output
3
CLK I3
(A) I0, 1, 1, I1, I3, 1, 1, I2 (B) I0, 1, I1, 1, I2, 1, I3, 1
(C) 1, I0, 1, I1, I2, 1, I3,1 (D) I0, I1, I2, I3, I0, I1, I2, I3
Answer: (A)
 EE-GATE-2014 PAPER-03|

Exp:
Decimal Binary Gray Output
A 2 A1 A 0
0 000 000 I0
1 0 01 0 01 1
2 0 10 0 11 1
3 011 010 I1
4 1 00 1 10 I3
5 101 1 11 1
6 11 0 101 1
7 111 10 0 I2

A 0 is mapped to E of 4 :1 MUX it means when A 0 ( E ) will be low then MUX will be

enabled and as per S0 ( A1 ) and S2 ( A 2 ) will produce the output and when A 0 ( E ) will be
high then 4 :1 MUX will be disabled and disabled output will be 1.

52. A hysteresis type TTL inverter is used to realize an oscillator in the circuit shown in the
figure.
10k

+5V
VO

0.1F

If the lower and upper trigger level voltages are 0.9 V and 1.7 V, the period (in ms), for
which output is LOW, is __________.
Answer: 0.66
Exp: Given LTP = 0.9
UTP = 1.7
VC ( t ) = Vmax + ( Vinitial Vmax ) e t RC

LTP = 0 + (1.7 0 ) e t /RC = 0.9

t = 0.635 ms ( Given R = 10k, C = 0.1 F ) .

 EE-GATE-2014 PAPER-03|

53. A three-phase fully controlled bridge converter is fed through star-delta transformer as shown
in the figure.
IR
R

1: K IO

The converter is operated at a firing angle of 300. Assuming the load current (I0) to be
virtually constant at 1 p.u. and transformer to be an ideal one, the input phase current
waveform is

2 / 3K 2 / 3K
( A) IR 1/ 3K ( B) IR K / 3
0 2 0 2

2K / 3
( C) IR ( D)
2 / 3K

0 2 IR 0 2

Answer: (B)

54. A diode circuit feeds an ideal inductor as shown in the figure. Given v s = 100 sin ( t ) V ,
where = 100rad / s, , and L = 31.83 mH. The initial value of inductor current is zero.
Switch S is closed at t = 2.5 ms. The peak value of inductor current iL (in A) in the first cycle
is ________.
t = 2.5ms
iL
S
+
Vs ~ L

Answer: 17.07A
 EE-GATE-2014 PAPER-03|

Exp: When S is closed

VL = Vs
di
L = Vm sin t
dt
t = 2.5ms
D
iL

S
+
+

VL L = 31.83mH

Vs = 100 sin t

Vm
di = sin t.dt but = 100 rad / sec
L
f =50 Hg T = 20 msa
Integrate on both sides

Vs

0 t(ms)
10 20
iL I L max

t(ms)
2.5 10 20

10103 Vm 10103
2.5103
L 2.510
di = 3
sin t.dt

Current Ic is changing from 0 to mgx density their period.

V V
Imax = m [ cos t ]2.5103 = m cos(100 10 103 ) cos(100 2.5 103
2.5103

L L
Vm
= cos cos
L 4
100
I max = [1 + 0.707]
100 31.83 103
Imax = 17.07A
 EE-GATE-2014 PAPER-03|

55. A single-phase voltage source inverter shown in figure is feeding power to a load. The
triggering pulses of the devices are also shown in the figure.

S1 S2
C S1 ,S4
O A
iL
Load 2
VDC B
C S3 S4
S2 ,S3
+ 2

If the load current is sinusoidal and is zero at 0, x, 2x...., the node voltage VAO has the
waveform

( A) ( B) VDC / 2
VDC / 2
VAO
VAO 2
2
VDC / 2

( C) VDC / 2
( D) VDC / 2

VAO
VAO 2
2
| VDC / 2

Answer: (D)