Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 193 views

    6.2.2.4 Packet Tracer - Configuring IPv4 Static and Default Routes Instructions PDF

    Uploaded by

    zulnorainali

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    6.2.2.4 Packet Tracer - Configuring IPv4 Static and Default Routes Instructions PDF

    Uploaded by

    zulnorainali
    193 views4 pages

    Original Title

    6.2.2.4 Packet Tracer - Configuring IPv4 Static and Default Routes Instructions - CCNAv6.com.pdf

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    193 views4 pages

    6.2.2.4 Packet Tracer - Configuring IPv4 Static and Default Routes Instructions PDF

    Uploaded by

    zulnorainali

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 4

    Packet Tracer - Configuring IPv4 Static and Default Routes

    (Instructor Version)
    Instructor Note: Red font color or Gray highlights indicate text that appears in the instructor copy only.

    Topology

    Addressing Table

    Device Interface IPv4 Address Subnet Mask Default Gateway

    G0/0 172.31.1.1 255.255.255.128 N/A


    R1 S0/0/0 172.31.1.194 255.255.255.252 N/A
    G0/0 172.31.0.1 255.255.255.0 N/A
    S0/0/0 172.31.1.193 255.255.255.252 N/A
    R2 S0/0/1 172.31.1.197 255.255.255.252 N/A
    G0/0 172.31.1.129 255.255.255.192 N/A
    R3 S0/0/1 172.31.1.198 255.255.255.252 N/A
    PC1 NIC 172.31.1.126 255.255.255.128 172.31.1.1
    PC2 NIC 172.31.0.254 255.255.255.0 172.31.0.1
    PC3 NIC 172.31.1.190 255.255.255.192 172.31.1.129

    Objectives
    Part 1: Examine the Network and Evaluate the Need for Static Routing
    Part 2: Configure Static and Default Routes
    Part 3: Verify Connectivity

    2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public. Page 1 of 4
    Packet Tracer - Configuring IPv4 Static and Default Routes

    Background
    In this activity, you will configure static and default routes. A static route is a route that is entered manually by
    the network administrator to create a reliable and safe route. There are four different static routes that are
    used in this activity: a recursive static route, a directly attached static route, a fully specified static route, and a
    default route.

    Part 1: Examine the Network and Evaluate the Need for Static Routing
    a. Looking at the topology diagram, how many networks are there in total? 5
    b. How many networks are directly connected to R1, R2, and R3? R1 has 2, R2 has 3, and R3 has 2.
    c. How many static routes are required by each router to reach networks that are not directly connected? R1
    needs 3 static routes, R2 needs 2 static routes, and R3 needs 3 static routes.
    d. Test connectivity to the R2 and R3 LANs by pinging PC2 and PC3 from PC1.
    Why were you unsuccessful? Because there are no routes to these networks on R1.

    Part 2: Configure Static and Default Routes


    Step 1: Configure recursive static routes on R1.
    a. What is recursive static route? A recursive static route relies on the next hop router in order for packets to
    be sent to its destination. A recursive static route requires two routing table lookups.
    b. Why does a recursive static route require two routing table lookups? It must first look in the routing table
    for the destination network and then look up the exit interface/direction of the network for the next hop
    router.
    c. Configure a recursive static route to every network not directly connected to R1, including the WAN link
    between R2 and R3.
    ip route 172.31.0.0 255.255.255.0 172.31.1.193
    ip route 172.31.1.196 255.255.255.252 172.31.1.193
    ip route 172.31.1.128 255.255.255.192 172.31.1.193
    d. Test connectivity to the R2 LAN and ping the IP addresses of PC2 and PC3.
    Why were you unsuccessful? R1 has a route to the R2 and R3 LANs, but R2 and R3 do not have a routes
    to R1.

    Step 2: Configure directly attached static routes on R2.


    a. How does a directly attached static route differ from a recursive static route? A directly attached static
    route relies on its exit interface in order for packets to be sent to its destination, while a recursive static
    route uses the IP address of the next hop router.
    b. Configure a directly attached static route from R2 to every network not directly connected.
    ip route 172.31.1.0 255.255.255.128 Serial0/0/0
    ip route 172.31.1.128 255.255.255.192 Serial0/0/1
    c. Which command only displays directly connected networks? show ip route connected
    d. Which command only displays the static routes listed in the routing table? show ip route static
    e. When viewing the entire routing table, how can you distinguish between a directly attached static route
    and a directly connected network? The static route has an S and a directly connected network has a C.

    2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public. Page 2 of 4
    Packet Tracer - Configuring IPv4 Static and Default Routes

    Step 3: Configure a default route on R3.


    a. How does a default route differ from a regular static route? A default route, also known as the gateway of
    last resort, is the network route used by a router when no other known route exists for a destination
    network. A static route is used to route traffic to a specific network.
    b. Configure a default route on R3 so that every network not directly connected is reachable.
    ip route 0.0.0.0 0.0.0.0 Serial0/0/1
    c. How is a static route displayed in the routing table? S* 0.0.0.0/0

    Step 4: Document the commands for fully specified routes.


    Note: Packet Tracer does not currently support configuring fully specified static routes. Therefore, in this step,
    document the configuration for fully specified routes.
    a. Explain a fully specified route. A fully specified route is a static route that is configured with an exit
    interface and the next hop address.
    b. Which command provides a fully specified static route from R3 to the R2 LAN?
    R3(config)# ip route 172.31.0.0 255.255.255.0 s0/0/1 172.31.1.197
    c. Write a fully specified route from R3 to the network between R2 and R1. Do not configure the route; just
    calculate it.
    R3(config)# ip route 172.31.1.192 255.255.255.252 s0/0/1 172.31.1.197
    d. Write a fully specified static route from R3 to the R1 LAN. Do not configure the route; just calculate it.
    R3(config)# ip route 172.31.1.0 255.255.255.128 s0/0/1 172.31.1.197

    Step 5: Verify static route configurations.


    Use the appropriate show commands to verify correct configurations.
    Which show commands can you use to verify that the static routes are configured correctly? show ip
    route, show ip route static, and the show ip route [network] commands

    Part 3: Verify Connectivity


    Every device should now be able to ping every other device. If not, review your static and default route
    configurations.

    2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public. Page 3 of 4
    Packet Tracer - Configuring IPv4 Static and Default Routes

    Suggested Scoring Rubric

    Question Possible Earned


    Activity Section Location Points Points

    Part 1: Examine the Network and


    Evaluate the Need for Static a-d 10
    Routing
    Part 1 Total 10
    Part 2: Configure Static and Step 1 7
    Default Routes
    Step 2 7
    Step 3 3
    Step 4 10
    Step 5 3
    Part 2 Total 30
    Packet Tracer Score 60
    Total Score 100

    2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public. Page 4 of 4

    You might also like