Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 102 views

    Abrasive Cut

    Uploaded by

    Wahyu Haidar Pratama
    1. This document provides safety operating procedures for using an abrasive cut off saw. 2. Personal protective equipment like safety glasses, protective clothing, substantial footwear and hearing protection must be worn. Long hair and loose clothing should be contained. 3. Pre-operational checks of the saw, abrasive wheel, work area and guards are required before each use to ensure safe operation. Faulty equipment should not be used.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd

    Abrasive Cut

    Uploaded by

    Wahyu Haidar Pratama
    102 views1 page
    1. This document provides safety operating procedures for using an abrasive cut off saw. 2. Personal protective equipment like safety glasses, protective clothing, substantial footwear and hearing protection must be worn. Long hair and loose clothing should be contained. 3. Pre-operational checks of the saw, abrasive wheel, work area and guards are required before each use to ensure safe operation. Faulty equipment should not be used.

    Original Description:

    kokoh

    Copyright

    © © All Rights Reserved

    Available Formats

    DOC, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    1. This document provides safety operating procedures for using an abrasive cut off saw. 2. Personal protective equipment like safety glasses, protective clothing, substantial footwear and hearing protection must be worn. Long hair and loose clothing should be contained. 3. Pre-operational checks of the saw, abrasive wheel, work area and guards are required before each use to ensure safe operation. Faulty equipment should not be used.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd
    Download as doc, pdf, or txt
    102 views1 page

    Abrasive Cut

    Uploaded by

    Wahyu Haidar Pratama
    1. This document provides safety operating procedures for using an abrasive cut off saw. 2. Personal protective equipment like safety glasses, protective clothing, substantial footwear and hearing protection must be worn. Long hair and loose clothing should be contained. 3. Pre-operational checks of the saw, abrasive wheel, work area and guards are required before each use to ensure safe operation. Faulty equipment should not be used.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd
    Download as doc, pdf, or txt
    of 1

    Website link to this document: http://education.qld.gov.au/health/safety/hazards/equip-resources.

    html

    S A F E T Y O P E R ATI N G P R OC E D U R E S

    Abrasive Cut Off Saw


    DO NOT use this machine unless a teacher has instructed
    you in its safe use and operation and has given permission.
    Safety glasses must be worn at all times in work Long and loose hair must be contained.
    areas.
    Appropriate footwear with substantial Close fitting/protective clothing must be
    uppers must be worn. worn.

    Rings and jewellery must not be worn. Hearing protection must be worn when
    using this machine.

    PRE-OPERATIONAL SAFETY CHECKS


    1. Ensure the saw is properly secured to a worktable by bolts/ clamps at approximately hip height.
    2. Ensure the saw is operated on an RCD protected circuit.
    3. Use abrasive cut off wheels with the correct size arbor hole.
    4. Use abrasive cut off wheels which have a maximum safe operating speed greater than the no load RPM marked
    on the machines nameplate.
    5. Before each use inspect the cut off wheel for chips and cracks.
    6. Check workspaces and walkways to ensure no slip/trip-hazards are present.
    7. Ensure all guards are in place, in working order, and in proper adjustment and alignment.
    8. Ensure the depth stop is properly adjusted.
    9. Ensure you are familiar with the operation of the ON/OFF starter.
    10. Keep table and work area clear of all tools and off-cut material.
    11. Faulty equipment must not be used. Immediately report suspect equipment.

    OPERATIONAL SAFETY CHECKS


    This machine and abrasive wheel is not intended to cut wood or wood products.
    1. Ensure all adjustments to machine are secure before making a cut.
    2. Do not hold a workpiece by hand. Workpiece will become very hot while being cut.
    3. Use the vice to clamp the work and properly support the over-hanging portion or the workpiece level with the base
    of the machine.
    4. Do not use a length stop on the free off-cut end of a clamped workpiece.
    5. Allow the machine to reach full speed before contacting the workpiece.
    6. Do not have any part of your body in line with the path of the abrasive disc.
    7. Ease the abrasive disc against the work piece when starting to cut. Do not force tool.
    8. Keep hands away from cutting area. Do not attempt to remove cut material while wheel is moving.
    9. After finishing the cut, release the switch, hold the saw arm down and wait for the disc to stop before removing
    work or off-cut piece.
    10. Disconnect the plug from the power source and bring the machine to a complete standstill before making any
    adjustments.

    HOUSEKEEPING
    1. Ensure ventilation openings and switch levers are kept clean and free of foreign matter.
    2. Leave the machine in a safe, clean and tidy state.

    POTENTIAL HAZARDS
    Metal sparks Noise Sharp metal burrs
    Contact with rotating disc Eye injuries Burns from workpiece

    FORBIDDEN
    Do not grind on the side of abrasive cut off wheels

    This SOP should be used in conjunction with Education Policy and Procedures Register (EPPR) -
    HLS-PR-012: Curriculum Activity Risk Management Modules
    Acknowledgement: Much of the information for this document has been sourced from content kindly provided by
    Department of Education & Childrens Services SA website : Machine Guarding - Safe Operating Procedures .

    Date of last review ______________ Signature ______________________

    You might also like