Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 343 views

    Hardox 450 PDF

    Uploaded by

    Ariel Toño Vaquera Zeballos
    Hardox 450 is an abrasion resistant steel plate with a hardness of 450 HBW. It offers very good abrasion resistance and bending properties, making it suitable for applications like dumper bodies, conveyors, and cutting edges. The plate has a typical chemical composition, with carbon and other alloying elements within specified maximum levels. It is supplied between 3-80mm thick and has specified mechanical properties, including a tensile strength of 1400MPa and 10% elongation. The plate requires quenching and possible tempering to achieve its properties.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Hardox 450 PDF

    Uploaded by

    Ariel Toño Vaquera Zeballos
    343 views2 pages
    Hardox 450 is an abrasion resistant steel plate with a hardness of 450 HBW. It offers very good abrasion resistance and bending properties, making it suitable for applications like dumper bodies, conveyors, and cutting edges. The plate has a typical chemical composition, with carbon and other alloying elements within specified maximum levels. It is supplied between 3-80mm thick and has specified mechanical properties, including a tensile strength of 1400MPa and 10% elongation. The plate requires quenching and possible tempering to achieve its properties.

    Original Title

    HARDOX 450.pdf.pdf

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Hardox 450 is an abrasion resistant steel plate with a hardness of 450 HBW. It offers very good abrasion resistance and bending properties, making it suitable for applications like dumper bodies, conveyors, and cutting edges. The plate has a typical chemical composition, with carbon and other alloying elements within specified maximum levels. It is supplied between 3-80mm thick and has specified mechanical properties, including a tensile strength of 1400MPa and 10% elongation. The plate requires quenching and possible tempering to achieve its properties.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    343 views2 pages

    Hardox 450 PDF

    Uploaded by

    Ariel Toño Vaquera Zeballos
    Hardox 450 is an abrasion resistant steel plate with a hardness of 450 HBW. It offers very good abrasion resistance and bending properties, making it suitable for applications like dumper bodies, conveyors, and cutting edges. The plate has a typical chemical composition, with carbon and other alloying elements within specified maximum levels. It is supplied between 3-80mm thick and has specified mechanical properties, including a tensile strength of 1400MPa and 10% elongation. The plate requires quenching and possible tempering to achieve its properties.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    DATA SHEET: Version 2010-02-01

    Hardox 450
    Page. 1 (2)

    ABRASION RESISTANT PLATE

    Hardox 450 is an abrasion resistant plate with a hardness of 450 HBW, intended for applications where demands are imposed on abrasion
    resistance in combination with good cold bending properties. Hardox 450 offers very good weldability.

    Applications Dumper bodies, containers, crushers, sievers, feeders, measuring pockets, skips, cutting edges, conveyors,
    buckets, knives, gears, sprockets, etc.

    Chemical Composition Plate C Si Mn P S Cr Ni Mo B CEV CET


    (ladle analysis) thickness max max max max max max max max max typv. typv.
    mm % % % % % % % % %
    3*) - (8) 0,21 0,70 1,60 0,025 0,010 0,25 0,25 0,25 0,004 0,41 0,30
    8 - 20 0,21 0,70 1,60 0,025 0,010 0,50 0,25 0,25 0,004 0,47 0,34
    (20) - 40 0,23 0,70 1,60 0,025 0,010 1,00 0,25 0,25 0,004 0,57 0,37
    (40) - 50 0,23 0,70 1,60 0,025 0,010 1,40 0,25 0,60 0,004 0,59 0,36
    (50) - 80 0,26 0,70 1,60 0,025 0,010 1,40 1,00 0,60 0,004 0,72 0,41

    *) Plate thickness below 4 mm only after special agreement.

    Mn Cu + Ni
    CEV = C + + Cr + Mo + V +
    6 5 15
    Mn + Mo Cr + Cu Ni
    CET = C + + +
    10 20 40

    The steel is grain rened.

    Hardness HBW
    425-475

    Mechanical Properties Yield strength Tensile strength Elongation


    Typical values for Re Rm A5
    20 mm plate thickness MPa MPa %
    1200 1400 10

    Impact Properties Test Impact energy


    Typical value for temperature Charpy-V, longitudinal
    o
    20 mm plate thickness C J
    -40 (-40o F) 40

    Testing Brinell hardness, HBW according to EN ISO 6506-1, on a milled surface 0,5-3 mm below plate surface per
    heat and 40 tons. Tests are made for every variation of 15 mm in the thickness of plates from the same
    heat.

    Delivery Conditions Q.

    www.hardox.com
    DATA SHEET: Version 2010-02-01

    Hardox 450
    Page. 2 (2)

    Dimensions Hardox 450 is supplied in plate thicknesses of 3*)-80 mm. More detailed information on dimensions is
    provided in our bruchure 41-General product information Weldox, Hardox, Armox and Toolox-UK.

    *)
    Plate thickness below 4 mm only after special agreement.

    Tolerances Thickness tolerances according to SSAB Oxelsund thickness precision guarante AccuRollTech TM.
    - AccuRollTech TM meets then requirements of EN 10 029 Class A, but offers more narrow tolerances.
    More detailed information is given in our brochure 41-General product information Weldox, Hardox, Armox and
    Toolox-UK.

    According to EN 10 029.
    - Tolerances on shape, length and width.
    - Tolerances on atness according to Class N (Normal tolerances).

    Surface Properties According to EN 10 163-2


    - Requirements according to Class A.
    - Repair conditions according to Subclass 1.
    (Repair welding is allowed).

    General Technical According to our brochure 41-General product information Weldox, Hardox, Armox and Toolox - UK.
    Delivery Requirement

    Heat Treatment Hardox 450 has obtained its mechanical properties by quenching and when necessary by means of
    and Fabrication subsequent tempering. The properties of the delivery condition can not be retained
    after exposure to service or preheating temperatures in excess of 250oC (480 F).
    Hardox 450 is not intended for further heat treatment

    For information concerning welding and fabrication, see our brochures on www.hardox.com or consult our
    Technical Customer Service.

    Appropriate health and saftey precautions must be taken when welding, cutting, grinding or otherwise
    working on the product. Grinding, especially of primer coated plates, may produce dust with high particle
    concentration. Our Technical Customer Service Department will provide further information on request.

    168-UK, Hardox is a registered trademark of SSAB Oxelsund AB, Sweden.


    The UK English version of this document shall prevail in case of discrepancy.
    Download the latest version of this document on internet: www.ssab.com
    SSAB Oxelsund AB, 613 80 Oxelsund, Sweden, +46 155 25 40 00, www.ssab.com

    www.hardox.com

    You might also like