Vidyamandir Classes Capacitors

Capacitors
BASIC IDEAS Section - 1

Capacitor is an arrangement of two conductors carrying charges of equal magnitudes and opposite sign and
separated by an insulating medium. The following points may be carefully noted.
1. The net charge on the capacitor as a whole is zero. When we say that a capacitor has a charge Q, we
mean that the positively charged conductor has a charge +Q and negatively charged conductor has a
charge Q.
2. The positively charged conductor is at a higher potential than the negatively charged conductor. The
potential difference V between the conductors is proportional to the charge magnitude Q and the
ratio Q/V is known as capacitance C of the capacitor.
Q
C
V
Unit of capacitance is farad (F). The capacitance is usually measured in microfarad (F).
1 F = 106 F
3. In a circuit, a capacitor is represented by the symbol :
4. Capacitors work as a charge-storing or energy-storing devices. A capacitor can be thought of as a
device which stores energy in the form of electric field. Energy stored in a capacitor is denoted by U.
If V is the potential difference across the capacitor and Q is the charge on the capacitor and C is the
capacitance of capacitor, then :
1 1 Q2 1
U CV 2 or U or U QV
2 2 C 2

Parallel Plate Capacitor :

d
The parallel plate capacitor consists of two metal plates placed parallel to
+
each other and separated by a distance that is very small as compared to +
the dimension of the plates. The electric field between the plates is given by : +
+
+
+
E +
k 0
+
where : surface charge density on either plate V
k : dielectric constant of the medium between plates
If d is the separation between plates and A is the area of each plate, the potential difference (V) between
plates is given as :

Self Study Course for IITJEE with Online Support Section 1 1

 Capacitors Vidyamandir Classes

V=Ed
Q
V d d
k 0 k 0 A
k A
C 0 for parallel plate capacitor..
d
Note : If there is vacuum between the plates, k = 1.

Isolated Sphere as a Capacitor :

A conducting sphere of radius R carrying a charge Q can be treated as a
capacitor with high-potential conductor as the sphere itself and the low-potential
conductor as a sphere of infinite radius. The potential difference between these
two spheres is :
Q
V 0
4 0R
Q
Capacitance (C)
V
C = 4 0 R

Cylindrical Capacitor :
Cylindrical capacitor consists of two co-axial cylinders of radii a and
b and length . The electric field exists in the region between the
cylinders. Let k be the dielectric constant of the material between the
cylinders. The capacitance is given by :
2 k 0
C
b
og
a

Spherical Capacitor :
A spherical capacitor consists of two concentric spheres of radii a and b as shown. The inner sphere is
positively charged to potential V and outer sphere is at zero potential. The inner surface of the outer sphere
has an equal negative charge.
The potential difference between the spheres is :

Q Q Q 1 1
V 0
4 0 a 4 0 b 4 0 a b

2 Section 1 Self Study Course for IITJEE with Online Support

 Vidyamandir Classes Capacitors

4 0 ab

C= +

ba
+

+
For a dielectric (k) between the spheres : +
+
4 k 0 ab + +
C=
ba

Illustration - 1 The plates of a parallel plate capacitor are 5 mm apart and 2 m2 in area. The plates are in
vacuum. A potential difference of 10, 000 V is applied across the capacitor. Calculate :
(a) the capacitance, (b) the charge on each plate,
(c) the electric field in space between the plates (d) the energy stored in the capacitor.
SOLUTION :
12 V 10000
(a) C 0 A 8.85 10 2 (c) E V/m = 20 105 N/C
3
d 5 103 d 5 10
or alternatively
C = 0.00354 F.
(b) Q = CV = (0.00354 106) (10000) Q 3.54 105
E=
0 0 A 8.85 1012 2
Q = 3.54 105 C = 35.4 C
The plate at higher potential has a positive charge = 20 105 N/C
of magnitude 35.4 C and the plate at lower 1
(d) U CV 2
potential has a negative charge of 35.4 C. 2
1
U = ( 3.54 109) (10000)2 = 0.177 J.
2

Illustration - 2 A parallel plate air capacitor is made using two plates 0.2 m square, spaced 1 cm apart. It
is connected to a 50 V battery.
(a) What is the capacitance ?
(b) What is the charge on each plate ?
(c) What is the energy stored in the capacitor ?
(d) What is the electric field between the plates ?
(e) If the battery is disconnected and then the plates are pulled apart to a separation of 2 cm, what are
the answers to the above parts ?

Self Study Course for IITJEE with Online Support Section 1 3

 Capacitors Vidyamandir Classes

SOLUTION :
A 1
0 A 8.85 1012 0.2 0.2 C 0 C0 1.77 105 F .
C
(a) 0 d 2
d0 0.01
Q = Q0 = 1.77 103 C
C0 = 3.54 105 F.
Q Q0
(b) Q0 = C0 V0 = (3.54 105 50) C V 2V0 100 volts
C C0 / 2
Q0 = 1.77 103 C
1 Q 2 1 Q02
U
(c) U0 = 1/2 C0 V02 = 1/2 (3.54 1011) (50)2 2 C 2 C0 / 2
U0 = 4.42 108 J.
2U 0 8.84 10 8 J
V 50 V 2V
(d) E0 0 5000 V / m . 0 E0 = 5000 V/m.
d 0 0.01 E=
d 2d0
(e) If the battery is disconnected, the charge on the
capacitor plates remains constant while the Work has to be done against the attraction of
potential difference between plates can change. plates when they are separated. This work gets
stored in the energy of the capacitor.

Illustration - 3 In the last example, suppose that the battery is kept connected while the plates are pulled
apart. What are the answers to the parts (a), (b), (c) and (d) in that case ?
SOLUTION :
If the battery is kept connected, the potential 1 1 1 1
difference across the capacitor plates always U CV 2 C0 V02 U 0
2 2 2 2
remains equal to the emf of battery and hence is
constant. = 2.21 108 J.

V = V0 = 50 volts.
V V 1
E 0 E0 2500 V / m
d 2d0 2
0 A 0 A 1
C C0 1.77 10 5 F Note that the energy stored in the capacitor
d 2d 0 2 decreases. The work done to separate plates
1 1 and the energy loss from capacitor get converted
Q CV C0V0 Q0
2 2 to heat dissipation in the connecting wire and
energy used in charging the battery.
= 8.85 104 C.

4 Section 1 Self Study Course for IITJEE with Online Support

 Vidyamandir Classes Capacitors

Illustration - 4 A parallel plate capacitor has plates of area 4 m2 separated by a distance of 0.5 mm. The
capacitor is connected across a cell of emf 100 volts.
(a) Find the capacitance, charge amd energy stored in the capacitor.
(b) A dielectric slab of thickness 0.5 mm is inserted inside this capacitor after it has been disconnected
from the cell. Find the answers to part (a) if k = 3.
SOLUTION :

0 A 8.85 1012 4 Q Q0 V0 100

(a) C0 d V = C kC k 3 volts.
0.5 103 0

C0 = 7.08 102 F. 1 Q0 1 Q02 U

U 0
Q0 = C0V0 2 C 2 kC0 k
= (7.08 102 100) C = 7.08 C. = 118 10-6 J.
1 Electric field inside the plates
U0 C0V02 = 345 106 J.
2 V V0 E
=E 0.
(b) As the cell has been disconnected, Q = Q0 d kd k
k 0A Note that the field becomes 1/k times by insertion
C kC0 = 0.2124F
d of dielectric.

CAPACITORS IN SERIES AND PARALLEL COMBINATION Section - 2

Series Combinations :
When capacitors are connected in series, the magnitude of charge Q on each capacitor is same. The
potential difference across C1 and C2 is different i.e., V1 and V2.
Q = C1 V1 = C2 V2

the total potential difference across combination is :

V = V1 + V2
Q Q
V
C1 C2
V 1 1

Q C1 C2

Self Study Course for IITJEE with Online Support Section 2 5

Capacitors Vidyamandir Classes

The ratio Q/V is called as the equivalent capacitance C between point a and b.
1 1 1
The equivalent capacitance C is given by :
C C1 C2
The potential difference across C1 and C2 is V1 and V2 respectively, given as follows :
C2 C1
V1 V2 V
C1 C2 ; C1 C2

In case of more than two capacitors, the relation is :

1 1 1 1 1
.........
C C1 C2 C3 C4

Parallel Combinations :
When capacitors are connected in parallel, the potential difference V across each is same and the charge on
C1, C2 is different i.e., Q1 and Q2.
The total charge is Q given as :
Q = Q1 + Q2
Q = C1V + C2V
Q
C1 C2
V
Equivalent capacitance between a and b is :
C = C1 + C2
The charges on capacitors is given as :
C1
Q1 Q
C1 C2
C2
Q2 Q
C1 C2

In case of more than two capacitors, C = C1 + C2 + C3 + C4 + C5 + . . . . . . .

6 Section 2 Self Study Course for IITJEE with Online Support

 Vidyamandir Classes Capacitors

Illustration - 5 Two capacitors of capacitances C1 = 6 F and C2 = 3 F are connected in series across

a cell of emf 18 V. Calculate :
(a) the equivalent capacitance (b) the potential difference across each capacitor
(c) the charge on each capacitor.

SOLUTION :

C2 3
(b) V1 V 18 6 volts
C1 C2 63
C1 6
V2 V 18 12 volts
C1 C2 63

1 1 1
(a) Note that the smaller capacitor C2 has a larger
C C1 C2
potential difference across it.
C1C2 63
C 2 F. (c) Q1 = Q2 = C1 V1 = C2 V2 = CV
C1 C2 6 3
charge on each capacitor = CV
= 2 F 18 volts = 36 C

Illustration - 6 In the circuit, the capacitors are C1 = 15 F, C2 = 10 F,

C3 = 25 F.
(a) Find the equivalent capacitance of the circuit,
(b) Find the charge on each capacitor, and
(c) Find the potential difference across each capacitor.
SOLUTION : C1
charge on C1 Q1 Q 75 C
Q1 + C1 C1 C2
+ +
+ Q + C1
Q2 + C2 C3 charge on C2 Q2 Q 50 C
C1 C2
10V
charge on C3 = Q = 125 C
C1 C2 C3 25 25 (c) p.d across C1 = V1
(a) C F 12.5 F
C1 C2 C3 25 25 Q1 75
= C 15 volts 5 volts.
1
(b) Q = total charge supplied by the cell = C V
p.d.across C2 = V2 = V1 = 5 volts.
Q = (12.5 10) C = 125 C
Q 125
p.d across C3 Q3 3 volts 5 volts .
C3 25

Self Study Course for IITJEE with Online Support Section 2 7

 Capacitors Vidyamandir Classes

Illustration - 7 The emf of the cell in the circuit is 12 volts and the
capacitors are : C1 = 1 F, C2 = 3 F, C3 = 2 F, C4 = 4 F. Calculate the
charge on each capacitor and the total charge drawn from the cell when
(a) the switch S is closed
(b) the switch S is open.
SOLUTION :
(a) Switch S is closed : (b) Switch S is open :
C1 C2
Q

C3 C4
12V

C1 C2 C2 C4 C1C2 C C
C
C1 C3 C2 C4 C 3 4
C1 C2 C3 C4
37 1 3 2 4 25
C 2.1 F
37 C F
1 3 2 4 12
total charge drawn from the cell is :
Total charge drawn from battery is :
Q = C V = 2.1 F 12 volts = 25.2 C 25
Q = CV = 12 = 25 C.
C1, C3 are in parallel and C2 , C4 are in parallel. 12
Charge on C1 C1 and C2 are in series and the potential
C1 1 difference across combination is 12 volts.
Q1 Q
C1 C3 1 2 25.2 C Charge on C1 = charge on C2
= 8.4 C. C1C2 3
Charge on C3 = C C V 4 12 = 9 C.
1 2
C3 2
Q3 Q
C1 C3 1 2 25.2 C C3 and C4 are in series and the potential
difference across combination is 12 volts.
= 16.8 C
charge on C3 = charge on C4
Charge on C2
C2 3 C3C4 8
Q2 Q = C C V 6 12 = 16 C.
C2 C4 3 4 25.2 C 3 4
= 10.8 C
Charge on C4
C4 4
Q4 Q
C2 C4 3 4 25.2 C
= 14.4 C

8 Section 2 Self Study Course for IITJEE with Online Support

 Vidyamandir Classes Capacitors

Illustration - 8 In the circuit shown, the capacitances are :

C1 = 1 F C2 = 2 F
C3 = 3 F C4 = 6 F
The emf of the cell is E = 100 volts. Find the charge and the potential
difference across the capacitor C4.

SOLUTION :

Potential difference across B, C is :

C1 1
VBC E
C1 C BC 1 4 (100)
= 20 volts.
Potential difference across C4 is :

The capacitance between points B, C is : 3 20

V4 20 volts
36 3
36
C BC Charge on capacitor C4 = C4 V4
3 6 + 2 = 4 F
60
=6 C = 40 C.
9

NOW ATTEMPT IN-CHAPTER EXERCISE-A BEFORE PROCEEDING AHEAD IN THIS EBOOK

CAPACITOR WITH MORE THAN ONE DIELECTRIC SLABS Section - 3

(I) A parallel plate capacitor contains two dielectric slabs of thickness d1, d2
and dielectric constants k1 and k2 respectively. The area of the capacitor + + + + + + +
plates and slabs is equal to A. K1 d1
K2 d2
Considering the capacitor as a combination of two capacitors in series,
the equivalent capacitance C is given by :
1 1 1

C C1 C2
1 d1 d2

C k1 0 A k2 0 A
0A
C
d1 d2

k1 k2

Self Study Course for IITJEE with Online Support Section 3 9

 Capacitors Vidyamandir Classes

0 A
In general for more than one dielectric slab : C = di
ki
If V is the potential difference across the plates, the electric fields in the dielectrics are given as :
V Q CV k1 0 A
E1 1 use C1
d1 C1d1 C1d1 d1

1 V 1 V
E1 E2
d1 d d1 d
2 k1 2 k2
k1 k2 k1 k2

Note : k1 E1 = k2 E2 and E 1 d1 + E 2 d2 = V

(II) If there exits a dielectric slab of thickness t inside a capacitor whose plates
are separated by distance d, the equivalent capacitance is given as :

0 A
C
t d t (k =1 for vacuum)

k 1
0A
C
t
d t
k
The equivalent capacitance is not affected by changing the distance of slab from the parallel plates.
0 A
If the slab is of metal, the equivalent capacitance is : C (for a metal, k = )
d t
(III) Consider a capacitor with two dielectric slabs of same thickness d placed
inside it as shown. The slabs have dielectric constants k1 and k2 and areas
A1 and A2 respectively. Treating the combination as two capacitors in parallel,
C = C1 + C2
k A k A
C 1 0 1 2 0 2 C 0 k1 A1 k2 A2
d d d

10 Section 3 Self Study Course for IITJEE with Online Support

 Vidyamandir Classes Capacitors

Illustration - 9 A slab is inserted inside a parallel plate capacitor whose capacitance is 20 F without the
slab. The thickness of the slab is 0.6 times the separation between the plates. The capacitor is charged to a
potential difference of 200 volts and then disconnected from the source. The slab was then removed from the
gap. Find the work done in removing the slab if it is made of
(a) glass (k = 6) (b) metal.
SOLUTION :
Let C0 , C be the capacitances before and after Q2 Q2
Work done = ( = gain in P.E.)
the insertion. 2C0 2C

(a) With glass slab :

8 8 106 106 106
A 0 A 0.8 J .
C0 0 and C 1 2 20 40
d t
d t
k (b) with metal slab :
where t = 0.6 d
A C d
C0 d20 106 C 0 0 = 2.5 C = 50 F.
C 40 F d t d t 0
t 0.6
d t 1 0.6
k 6 Q2 1 1
Work done
Q = charge on capacitor = CV 2 C0 C
= 40 200 10-6 V = 8 103 C.
2
After removing the slab, the capacitance again

50 106 200 106 106
= 1.5 J
becomes C0. 2 20 50

Illustration - 10 The plates of the capacitor formed by inserting four

dielectric slabs (as shown) have an area equal to S. Find the equivalent
capacitance between A and B if 2 k1 = 2 k2 = k3 = k4 = 5.
SOLUTION :
A

C1 C2
0 S S 0 S / 2
=
d k1 4 k2 4 d / 2 d / 2

B
k3 k4
Consider the capacitor as a parallel combination
of C1 and C2. S S k k
0 k1 k2 0 3 4
Net capacitance = C1 + C2 4d d k3 k4

Self Study Course for IITJEE with Online Support Section 3 11

Capacitors Vidyamandir Classes

CHARGING AND DISCHARGING OF A CAPACITOR Section - 4

In the circuit considered so far, we have been concerned with the capacitors in the steady state i.e., the
capacitors which have already been charged to their steady state voltages.
Now consider a circuit where an uncharged capacitor C is connected
to a cell of emf E through a resistance R and a switch S as shown. At t
= 0, the switch S is closed. The positive charge begins to flow from
positive terminal of cell towards the upper capacitor plate and from
lower plate to the negative terminal of the cell. Thus the upper plate of
capacitor begins to acquire positive charge and lower plate becomes
negatively charged. The voltage across capacitor begins to grow.
Let q, Vc be the charge and voltage on the capacitor at time t and i be
the current.
Kirchoffs Law gives :
E iR Vc = 0
q
dq q dq
ER 0 i CE
dt C dt
q t
dq dt dq dt

CE q RC CE q RC t
0 0

q(t) = CE (1 e t/RC)
This equation gives the expression for charge on capacitor as a function of time. The charge grows on the
plate exponentially as shown on the graph. Note the following points.
1. In steady state : t and qCE
2. The voltage across capacitor also grows exponentially towards E.
q
V E (1 e t / RC )
C
3. The time constant () of the circuit is defined as the time after
which the charge has grown upto (1 1/e) = 0.63 63 % of its
steady-state value.
=RC
4. From conservation of energy, we can see that :
Energy supplied Energy stored Heat disipated

by cell per sec capacitor in R per sec

Ei = iVc + i2 R

12 Section 4 Self Study Course for IITJEE with Online Support

 Vidyamandir Classes Capacitors

E = Vc + iR
q dq
E= R
C dt
dq dq
(Note that i = , as q is increasing and hence is positive)
dt dt

Discharging of a Capacitor :
If we connect a charged capacitor C across a resistance R, the capacitor
begins to discharge through R. The excess positive charge on high
potential plate flows through R to the negative plate and in steady state,
the capacitor plates become uncharged. As the charge on plates
decreases with time, dq/dt is negative and hence :
dq
i =
dt
From Kirchoffs Law :
q
Vc = i R
q t q0
q dq dq dt
R
C dt q RC
q0 0

where q0 is the charge an capacitor at t = 0. t

q(t) = q0 e t/RC

Illustration - 11 A 3 106 ohm resistor and a 1 F capacitor are connected in a single-loop circuit with a
seat of emf with E = 4 volts. At 1 sec after the connection is made, what are the rates at which :
(a) the charge of the capacitor is increasing, (b) energy is being stored in the capacitor,
(c) joule heat is appearing in the resistor, (d) energy is being delivered by the seat of emf ?
SOLUTION :
E=4V i R At t = 1s :
R = 3 106 ohm dq 4
e 1/ RC
E C dt 3 10 6
C = 1 F
4
106 e1/ 3 9.6 107 C / s

3
dq d
(a) i
dt dt

CE 1 e1t / RC
(b)
dU
iVc
iq
dt C
CE t / RC E t / RC
e e
RC R

Self Study Course for IITJEE with Online Support Section 4 13

 Capacitors Vidyamandir Classes

1 E t / RC (c) P = i2 R

C R
e
CE 1 e t / RC = (9.6 107)2 3 106
dU E 2 1/ 3 = 2.7 106 W.
dt

R
e
1 e 1 / 3 (d) Energy supplied/s = E i
16

3 10 6
e1/ 3 1 e 1/ 3 1.1 106 W = 4 (9.6 10-7) = 3.8 106 W.

Illustration - 12 A 0.05 F capacitor is charged to a potential of 200 V and is then permitted to discharge
through 10 M resistor. How much time is required for the charge to decrease to :
(a) 1/e (b) 1/e2 of its initial value ?
SOLUTION :
1 q
i (a) q q0 0 q0e t / RC
e e
++ R e1 = et/RC
C
t = RC = 10 106 0.05 106 s
= 0.5 s.
At t = 0, charge on capacitor is q0.
1 q0 t / RC
q0 = 0.05 106 200 = 1 105 C. (b) q 2 q0 2 q0e
e e
q = q0 et/RC
t = 2RC = 1s.

Illustration - 13 The circuit shown on the right is in steady state.

Find the charge on the capacitor plates and the energy stored in the
capacitor C = 4 F.
SOLUTION :
When the circuit is in steady state, there is no
current through the capacitor and hence there is
no current through the 3 ohm resistor.
All the current supplied by battery goes through
the 10 ohm resistor and 20 ohm resistor which
appear in series.
60
i 2A
10 20
potential difference across capacitor
plates

14 Section 4 Self Study Course for IITJEE with Online Support

 Vidyamandir Classes Capacitors

= 7 p.d. across ab = i 20 1 2
Energy stored = CVab
2
= 2 20 = 40 volts.
Charge on capacitor = CVab = 4 40 C 1
= ( 4F) (40 V)2 = 3200 J
2
= 160 C.

NOW ATTEMPT IN-CHAPTER EXERCISE-B BEFORE PROCEEDING AHEAD IN THIS EBOOK

SUBJECTIVE SOLVED EXAMPLES

Example - 1 In given circuit, the emf of cells are E1 = 13 kV E2 = 12 kV. E1

The capacitances are C1 = 3 F and C2 = 7 F. Find the voltage and charge

C1 C2
on each capacitor.
SOLUTION : E2
The circuit can be re-arranged as :
C1 3
V2 E1 E2 25 7.5 kV
C1 C2 37
Charges are :
Q1 = C1 V1
= 3 106 17.5 10+3 C
The capacitors are effectively in series. Let V1
and V2 be the voltages across capacitors. = 5.25 102 C
C2
V1 E1 E2 Q2 = C2 V2 = 5.25 102 C
C1 C2
7
25 17.5 kV
37

Example - 2 Find the capacitance between A and B if C1 = C2 = C3 = C4 = 4 F and C0 = 3 F.

Self Study Course for IITJEE with Online Support Subjective Solved Examples 15
 Capacitors Vidyamandir Classes

SOLUTION :
Let us redraw the circuit as shown : The network is balanced
Vp = VQ
C0 will not be charged and hence can be
removed.
C1C2 C3C4
CAB = C C C C = 4 F
C1 C3 1 2 3 4
1
C2 C4

Example - 3 Two metal spheres of radii r1 = 4 cm and r2 = 10 cm charged to potentials V1 = 100 volts,
V2 = 30 volts are placed at a large distance from each other. A conducing wire is then connected between the
spheres. Find the :
(a) common potential of the spheres in steady state (b) final charges on the spheres
(c) loss of energy of the system .
SOLUTION :
When the spheres are joined by a conducting Final charges on spheres are :
wire, the positive charge flows from the sphere Q1 = C1 V = (40r1) V = 2/9 103 C.
at higher potential to the sphere at lower
Q2 = C2 V = (4 0r2) V = 5/9 103 C.
potential. When the potential of each sphere
becomes same, the flow of charge stops. The loss in electrostatic potential energy is converted to
heat due to the flow of charges in wire.
Let V = common potential in steady state.
loss of energy = Ui Uf
Consider the spheres as capacitors C1 and C2 ,
1 2 1 2 1 2 1 2
C1 = 4 0r1 C2 = 40r2 = C1V1 C2V2 C1V C2V
2 2 2 2
Using charge conservation :
1 1
C1 V1 + C2 V2 = C1 V + C2 V 4 0r1 (1002 502 ) 4 0r2 (302 502 )
2 2
C V C2V2 r1V1 r2V2 7
V 11 = 108 J
C1 C2 r1 r2 9
= 50 volts.

16 Subjective Solved Examples Self Study Course for IITJEE with Online Support
 Vidyamandir Classes Capacitors

Example - 4 A 20 F capacitor is charged to a potential difference of 1000 V. The terminals of the

charged capacitor are then connected to those of an uncharged 5 F capacitor. Calculate :
(a) the original charge of the system (b) the final potential difference across each capacitor
(c) the final charges on each capacitor (d) the decrease in energy as a result of the process .
SOLUTION :
Charge on capacitor = Q0 = C0 V0 = (20 1000) C
Q0 = 0.02 C
When the capacitor are connected, the charge moves from the charged to the uncharged capacitor due to
potential difference. This redistribution of charge continues till the potential difference across each capacitor
becomes same.

Let V = final common potential difference across each capacitor.

Conservation of charge : Qi = Qf

C0V0 0.02 C
C0 V0 + 0 = C0 V + C V V
C C0 25 F = 800 volts

The charge on C0 gets shared between C0 and C.

Final charges on the capacitors are :
Q (on C0) = C0 V = (20 800) C = 16000 C
Q (on C) = C V = 5 800 C = 4000 C
1 2 1 2 2 1 6 2 1 2 2 6
losss in energy = C0V0 C0V CV (20 10 ) (1000) 20(800) (800) 10
2 2 2 2
=2J
This energy loss gets dissipated as heat in the connecting wires due to the currents that flow during redistribution
of charges. In steady state, these currents disappear when redistribution stops.

Self Study Course for IITJEE with Online Support Subjective Solved Examples 17
 Capacitors Vidyamandir Classes

Example - 5 A 1 F capacitor and a 2 F capacitor are connected in series across a 1200 V supply line.
(a) Find the voltage across each capacitor .
(b) The charged capacitors are disconnected from the line and from each other and reconnected with
terminals of like sign together . Find the final charge on each and the voltage across each .
SOLUTION :
C2 2
V1 V Initial sum of charges on upper plates = final sum
C1 C2 1 2 1200 = 800 volts.
of charges on upper plates
C1 1 (charge on C1)i + (charge on C2)i
V2 V 1200 = 400 volts.
C1 C2 1 2
= (charge on C1)f + (charge on C2)f
C1 V1 + C2 V2 = C1 V + C2 V
C V C2V2
V 11
C1 C2
800 800 1600
V volts .
1 2 3
Final charges :
The total charge remains same on the plates 1600
Q1 C1V C
connected together. 3
Let V be the final common potential difference 3200
across each capacitor. Q2 C2V C
3
If plates of same polarity are connected together,

Example - 6 Two capacitors C1 = 1 F and C2 = 4 F are charged to a potential difference of 100 volts
and 200 volts respectively. The charged capacitors are now connected to each other with terminals of opposite
sign connected together. What is the
(a) final charge on each capacitor in steady state ? (b) decrease in the energy of the system ?
SOLUTION :
Initial charge on C1 = C1 V1 = 100 C
Initial charge on C2 = C2 V2 = 800 C
C1 V1 < C2 V2
When the terminals of opposite polarity are
connected together, the magnitude of net charge
finally is equal to the difference of magnitude of
charges before connection.

18 Subjective Solved Examples Self Study Course for IITJEE with Online Support
 Vidyamandir Classes Capacitors

Initial sum of charges on upper plates = final sum of Note that because C1 V1 < C2 V2, the final charge
charges on upper plates. polarities are same as that of C2 before connection.
(charge on C2)i (charge on C1)i Final charge on C1 = C1 V = 140 C
= (charge on C2)f + (charge on C1)f Final charge on C2 = C2 V = 560 C
Let V be the final common potential difference across Loss of energy = Ui Uf
each.
Loss of energy
The charges will be redistributed and the system attains
a steady state when potential difference across each 1 2 1 2 1 2 1 2
capacitor becomes same. = C1V C2V2 C1V C2V
2 1 2 2 2
C2V2 C1V1 = C2 V + C1V 1 2 1 2 1 2
1100 4 200 1 4 140
C V C1V1 800 100 2 2 2
V 1 2 140 volts
C2 C1 5 = 36000J = 0.036 J

Note : The energy is lost as heat in the connected wires

due to the temporary currents that flow while
the charge is being redistributed.

Example - 7 Four identical metal plates are located in air at equal

separations d as shown. The area of each plate is A. Calculate the effective
capacitance of the arrangement across A and B.
SOLUTION :
Let us call the i solated plate as P. A capacitor is formed by a pair of parallel plates facing each other. Hence
we have three capacitor formed by the pairs (1, 2), (3, 4) and (5, 6). The surface 2 and 3 are at same potential
as that of A. The surfaces 1, 4, 5 are at same potential (P). The arrangement can be redrawn as a network of
three capacitors.

2 1 P 5 6
A B
3 4

2C. C 2C 2 0 A
C AB
2C C 3 =3 d

Self Study Course for IITJEE with Online Support Subjective Solved Examples 19
 Capacitors Vidyamandir Classes

Example - 8 The capacitors in the given circuit have capacitances C1 C2

C1 = 1 F ; C2 = 4 F and C3 = 2F . The emf s of the cells are E1 = 5V
C3
and E2 = 10V. Calculate the charges on all the capacitors.
SOLUTION : E1 E2

Let x, y be the positive charges in C that flow

along the branches as shown. If a positive charge
Note that the pd is taken negative if we go from
enters a plate, it becomes positive and if it leaves
a plate, it becomes negative. Applying KVL in a positive plate to a negative plate and vice-
clockwise direction in the two loops, we get : versa. Solving the two equations we get :
x = 10C , y = 10C
x y = 20 C
Hence the capacitor C1 has a charge of 10 C,
C2 has a charge of 20 C and C3 has a charge
of 10C. The polarities of C1 and C2 were
x y y x y
5 0, 10 0 assumed correctly while C3 has its upper plate
1 2 2 4
negative and lower plate positive.

Example - 9 In the circuit shown in figure, the emf of each battery

is equal to E = 60V, and the capacitances are equal to C1 = 2.0 F and
C2 = 3.0 F. Find the charges which will flow after the shorting of the
switch S through section 1, 2 and 3 in the directions indicated by the
arrows.
SOLUTION :

V1 = final p.d. across C1 = E

V2 = final p.d. across C2 = E

V01 = pd across C1 before shorting the switch

C2
= 2E 72V
C1 C2
V02 = pd across C2 before shorting the switch

C1
= 2E 48V
C1 C2

20 Subjective Solved Examples Self Study Course for IITJEE with Online Support
 Vidyamandir Classes Capacitors

The charge q1 goes on to the upper plate of C1. We also have q1 + q2 + q3 = 0

q1 = Q1 q3 = (q1 + q2) = E (C2 C1) = 60 C.

2EC2 (b) Work done by cells

= C1 V1 C1 V01 = C 1 E
C1 C2 = E q1 + E (q2)
C1E( C1 C2 ) = E (q1 q2 ) = 720 J
= 24 C
C1 C2 Charge in the potential energy of the circuit
Similarly q2 goes to the lower negative plate of C2. 1
q2 = Q2 = (C2 V2) (C2 V02 )
2

= C1 V1 V0
2
2
1
12 C V2 2
2
V02
2

1 1
C2 2 EC1
= C2 E + C2 C C 2
2 2
2
2

= 2 60 72 3 60 48
2

1 2 = 360 J
C2 E C1 C2 Heat dissipated = 720 J (360) J
36 C
C1 C2 = 360 J.

Example - 10 In the given circuit : E1 = 3E2 = 2E3 = 6 volts ; R1 = 2R4

= 6 ohm, R3 = 2R2 = 4 ohm, C = 5F. Find the current in R3 and the energy
stored in the capacitor.
SOLUTION :
In steady state, there will be no current in R1
because it is in series with capacitor
Loop containing E2, E3, R4, R3, R2 :
E3 xR4 (x y) R3 x R2 + E2 = 0
2 (x y) = 3 and 9x 4y = 5
x = 0.2 A, y = 1.7 A
Current in R3 = x y = 0.2 (1.7) = 1.5 A
P.d. across capacitor C = Va Vb
Loop containing E1 and R3 : = x R2 + E2 =2.4 volts.
E1 (x y) R3 = 0 Energy stored = 1/2 CV2
= 1/2 (5 106) ( 2.4)2 = 1.44 105 J.

Self Study Course for IITJEE with Online Support Subjective Solved Examples 21
 Capacitors Vidyamandir Classes

Example - 11 A parallel plate capacitor is charged by applying a potential difference across its plates. The
capacitor is now disconnected from the battery and is placed vertically on the surface of liquid of density 1200
kg/m3. If the liquid rises to a height of 2 mm inside the capacitor plates, calculate the potential difference
applied across the plates initially. The capacitor plates are of length 10 cm and area 50 cm2. They are separated
by 1.0 mm. Dielectric constant of liquid = 14.
SOLUTION :
Separation = d = 0.2 cm.
h = height of the liquid rise, k =14
Final capacitance
0
=C= {k1 A1 + k2 A2}
d
0
= {b ( h) + k b h}
d
Let C0 = initial capacitance and V0 = initial pd
across capacitor. Loss in electrical energy = gain in GPE of
liquid.
Initial charge = C0 V0 = final charge.
Let length of plates (vertical dimension) C0V0 2
C0V0
2
mg
h

= = 10 cm 2C0 2C 2
Breadth = b = 5 cm, V0 = 78.17 V

Example - 12 Two capacitors of capacitances C1 and C2 are charged to potential V01 and V02 respectively.
They are insulated from the source and at time t = 0, are connected in parallel to each other through a
resistance R. Find the current I after time t in the circuit.
SOLUTION : Differentiating I,

di 1 d q1 q
2
dt R dt C1 C2

di i 1 1

Let V1 (t) = potential difference across C1 dt R C1 C2
V2 (t) = pd across C2 as shown i t
di dt C1C2
V V where C
i (t) = 1 2 . . . .(i) i0
i RC
0 C1 C2
R
Rate of loss of charge on C1
i i0 e t / RC
= rate of gain of charge on C2 = current
dq1 dq2 V01 V02
i . . . .(ii) where i0 i 0
dt dt R

22 Subjective Solved Examples Self Study Course for IITJEE with Online Support
 NOW ATTEMPT OBJECTIVE WORKSHEET TO COMPLETE THIS EBOOK

Vidyamandir Classes Capacitors

THINGS TO REMEMBER

1. Capacitor is an arrangement of two conductors carrying charges of equal magnitudes and opposite sign and
separated by an insulating medium. The following points may be carefully noted.
(a) The positively charged conductor is at a higher potential than the negatively charged conductor. The potential
difference V between the conductors is proportional to the charge magnitude Q and the ratio Q/V is known as
capacitance C of the capacitor.
Q
C
V
(b) Capacitors work as a charge-storing or energy-storing devices. A capacitor can be thought of as a device
which stores energy in the form of electric field. Energy stored in a capacitor is denoted by U. If V is the
potential difference across the capacitor and Q is the charge on the capacitor and C is the capacitance of
capacitor, then :
1 1 Q2 1
U CV 2 or U or U QV
2 2 C 2

2. (a) Parallel Plate Capacitor :

d
The parallel plate capacitor consists of two metal plates placed parallel to
+
each other and separated by a distance that is very small as compared to the +
dimension of the plates. +
+
k 0 A +
C for parallel plate capacitor.. +
d
+
Note : If there is vacuum between the plates, k = 1. +

(b) Isolated Sphere as a Capacitor :

A conducting sphere of radius R carrying a charge Q can be treated as a
capacitor with high-potential conductor as the sphere itself and the low-potential
conductor as a sphere of infinite radius. The potential difference between these
two spheres is :
Q
V 0
4 0R
Q
Capacitance (C)
V
C = 4 0 R

Self Study Course for IITJEE with Online Support Things to Remember 23
Capacitors Vidyamandir Classes

(c) Cylindrical Capacitor :

Cylindrical capacitor consists of two co-axial cylinders of radii a and
b and length . The electric field exists in the region between the
cylinders. Let k be the dielectric constant of the material between the
cylinders. The capacitance is given by :
2 k 0
C
b
og
a

(d) Spherical Capacitor :

A spherical capacitor consists of two concentric spheres of radii a and b as shown. The inner sphere is
positively charged to potential V and outer sphere is at zero potential. The inner surface of the outer sphere
has an equal negative charge.

The potential difference between the spheres is :

+ +

Q Q Q 1 1 +
V 0
4 0 a 4 0 b 4 0 a b +
+

+ +
4 0 ab
C=
ba
For a dielectric (k) between the spheres :
4 k 0 ab
C=
ba

3. Capacitors in Series and Parallel Combination

(a) Series Combinations :
When capacitors are connected in series, the magnitude of charge Q on each capacitor is same. The potential
difference across C1 and C2 is different i.e., V1 and V2.
Q = C1 V1 = C2 V2
The equivalent capacitance C is given by :
1 1 1 1 1
....
C C1 C2 C3 C4
The potential difference across C1 and C2 is V1 and V2 respectively, given as follows :
C2 C1
V1 ; V2 V
C1 C2 C1 C2

24 Things to Remember Self Study Course for IITJEE with Online Support
 Vidyamandir Classes Capacitors

(b) Parallel Combinations :

When capacitors are connected in parallel, the potential difference V across each is same and the charge on
C1, C2 is different i.e., Q1 and Q2.
Equivalent capacitance between a and b is :
C = C1 + C2 + C4 + . . . . .
The charges on capacitors is given as :
C1 C2
Q1 Q and Q2 Q
C1 C2 C1 C2

4. A parallel plate capacitor contains two dielectric slabs of thickness d1, d2 + + + + + + +

and dielectric constants k1 and k2 respectively. The area of the capacitor K1 d1
plates and slabs is equal to A. K2 d2
Considering the capacitor as a combination of two capacitors in series, the

equivalent capacitance C is given by :

0A
C
d1 d2

k1 k2
0 A
In general for more than one dielectric slab : C =
d
ki
i

If V is the potential difference across the plates, the electric fields in the dielectrics are given as :
1 V 1 V
E1 E2
d1 d 2 k1 d1 d 2 k2

k1 k2 k1 k2

5.(a) If there exits a dielectric slab of thickness t inside a capacitor whose plates
are separated by distance d, the equivalent capacitance is given as :
0A
C
t
d t
k

The equivalent capacitance is not affected by changing the distance of slab from the parallel plates.
0 A
If the slab is of metal, the equivalent capacitance is : C (for a metal, k = )
d t

Self Study Course for IITJEE with Online Support Things to Remember 25
Capacitors Vidyamandir Classes

(b) Consider a capacitor with two dielectric slabs of same thickness d placed
inside it as shown. The slabs have dielectric constants k1 and k2 and
areas A1 and A2 respectively. Treating the combination as two capacitors
in parallel,

C 0 k1 A1 k2 A2
d

6. Consider a circuit where an uncharged capacitor C is connected to

a cell of emf E through a resistance R and a switch S as shown. At
t = 0, the switch S is closed.
Let q, Vc be the charge and voltage on the capacitor at time t and i be
the current. This equation gives the expression for charge on capacitor
as a function of time. The charge grows on the plate exponentially as
shown on the graph. Note the following points.
q
1. In steady state : t and qCE
CE
2. The voltage across capacitor also grows exponentially
towards E.
t
q
V E (1 e t / RC )
C
3. The time constant () of the circuit is defined as the time after
which the charge has grown upto (1 1/e) = 0.63 63 % of
its steady-state value.
=RC

7. If we connect a charged capacitor C across a resistance R, the capacitor

begins to discharge through R. The excess positive charge on high potential
plate flows through R to the negative plate and in steady state, the capacitor
plates become uncharged.

where q0 is the charge an capacitor at t = 0.

Where q(t) = q0 e t/RC q

q0

26 Things to Remember Self Study Course for IITJEE with Online Support
 Vidyamandir Classes

My Chapter Notes

Self Study Course for IITJEE with Online Support

 Vidyamandir Classes

Illustration - 1

Self Study Course for IITJEE with Online Support

Vidyamandir Classes

Self Study Course for IITJEE with Online Support

 Vidyamandir Classes

Self Study Course for IITJEE with Online Support