Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 427 views

    Blind Flange Design

    Uploaded by

    Sachin5586
    This document summarizes the design of a blind flange. Key details include: - Design pressure of 9.81 bar and temperature of 90°C - Flange and bolt materials of SA-182 F316 and SA-320 L7 - Required flange thickness of 23mm, provided thickness of 27mm - 16 bolts with an M20 size and bolt spacing of 76.475mm

    Copyright:

    © All Rights Reserved
    Download as XLS, PDF, TXT or read online from Scribd

    Blind Flange Design

    Uploaded by

    Sachin5586
    427 views1 page
    This document summarizes the design of a blind flange. Key details include: - Design pressure of 9.81 bar and temperature of 90°C - Flange and bolt materials of SA-182 F316 and SA-320 L7 - Required flange thickness of 23mm, provided thickness of 27mm - 16 bolts with an M20 size and bolt spacing of 76.475mm

    Original Description:

    blind flange design

    Copyright

    © © All Rights Reserved

    Available Formats

    XLS, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document summarizes the design of a blind flange. Key details include: - Design pressure of 9.81 bar and temperature of 90°C - Flange and bolt materials of SA-182 F316 and SA-320 L7 - Required flange thickness of 23mm, provided thickness of 27mm - 16 bolts with an M20 size and bolt spacing of 76.475mm

    Copyright:

    © All Rights Reserved
    Download as XLS, PDF, TXT or read online from Scribd
    Download as xls, pdf, or txt
    427 views1 page

    Blind Flange Design

    Uploaded by

    Sachin5586
    This document summarizes the design of a blind flange. Key details include: - Design pressure of 9.81 bar and temperature of 90°C - Flange and bolt materials of SA-182 F316 and SA-320 L7 - Required flange thickness of 23mm, provided thickness of 27mm - 16 bolts with an M20 size and bolt spacing of 76.475mm

    Copyright:

    © All Rights Reserved
    Download as XLS, PDF, TXT or read online from Scribd
    Download as xls, pdf, or txt
    of 1

    Design of Blind Flange

    Design Condition
    Design Pressure P 9.81 bar Allowable Stress
    Design Temperature 90 °C Flange N/mm2 Bolting N/mm2
    Flange material SA-182 F316 At design temp Sfo 120.86 At design temp Sb 171.96
    Bolt material SA-320 L7 At ambient temp Sfa 138 At ambient temp Sa 171.96
    Corrosion Allowance 0 mm Bolt Size M20 Joint Eff E 1
    Allowable stress of shell at design temperature 138 Full bolt load No

    Flange Dimensions Remark


    Bolt circle diameter C 392 mm BCD
    Flange outside diameter A 435 mm OD
    Provided edge distance E' 25 mm OK
    Provided number of bolt 16

    Gasket type & MOC Remark


    Gasket outside diameter GO 355 mm
    Gasket inside diameter GI 335 mm
    Width N 10 mm OK
    Basic Gasket width bo 5.000 mm
    Effective gasket width b 5.000 mm
    Gasket load reaction diameter G 345.00 mm
    Gasket seating load y 44.82 N/mm2
    Gasket factor m 3.5
    Minimum gasket contact width Nmin Ab*Sa/(y*Π*(GO+GI)) 6.147 mm Brown Young

    Length of Partition Gasket Lp 921.0 mm


    Width of Partition Gasket tp 7.0 mm
    Partition Gasket Factor mpart 3.5
    Partition Gasket Design Seating Stress ypart 44.820 N/mm2

    Load and bolt calculation Remark


    Hydrostatic End force H (Π/4)*G2*P 91676.972 N
    Total joint-contact surface compression load HP 2*Π*G*m*b*P 59331.052 N
    Minimum required bolt load for the operating conditions Wm1 HP+H 151008 N
    Minimum required bolt load for gasket seating Wm2 Π*y*b*G 387367.94 N
    Total cross-sectional area of bolts required for the Am Max(Wm2/Sa,Wm1/Sb) 2252.663 mm2
    operating conditions
    Cross-sectional area of the bolts using the root diameter of the Ab 3472.816 mm2 SAFE
    thread
    Flange design bolt load, for the operating conditions or gasket W 0.5*(Am+Ab)*Sa 492276.69 N
    seating
    For full bolt load condition W Sa*Ab 597185 N
    Radial distance from gasket load reaction to the bolt circle hG 0.5*(C-G) 23.50 mm

    Thickness Required
    Factor depending upon the method of attachment C' 0.3
    Required thickness under operating cond G√[(C'*P/S*E)+(1.9*Wm1*hG/S*E*G3)] 21 mm
    Required thickness under gasket seating cond G√[(1.9*Wm1*hG)/(S*E*G3)] 23 mm
    Hence the required thickness of the blind cover 23 mm
    Provided thickness of blind flange 27.00 mm
    Maximum bolt spacing Bsmax 2a+[6*t/(m+0.5)] 80.500 mm
    Provided bolt spacing BS 76.475 mm OK

    Required blind thickness at the centre = 22.96 mm


    Provided blind thickness at the centre = 27.00 mm

    You might also like