Interpolymer offers

several suggested formulations for

SYNTRAN® 6130 Wood Coatings Formulations.

(This is an interactive PDF file. Simply click on the links appropriate to the
information you wish to view.)

• SYNTRAN® 6130 Wood Basecoat (Sanding Sealer)

formulation F-43-067-01
• SYNTRAN® 6130 Wood Furniture Topcoat
formulation F-43-069-01
• SYNTRAN® 6130 Wood Floor Topcoat formulation
F-43-068-02

The suggestions and data included are based on information we believe to be reliable. They are offered in good faith, but without guarantee, as conditions and methods of use of our products are beyond our control. We
recommend that the prospective user determine the suitability of our materials and suggestions before adopting them on a commercial scale. It is the buyer’s responsibility to determine the suitability of the above
formulation through quality control and field testing. Suggestions for uses of our products should not be understood as recommendations that they be used in violation of any existing or pending patents.
WOOD BASE COAT BASED ON SYNTRAN® 6130
Formulation F-43-067-01 30% N.V.
This SYNTRAN 6130 base coat formulation is designed to fill and seal wood
pores completely before applying a topcoat. This sealer formulation sands easily
to a smooth surface for even topcoating.
Mix in Order Listed:

Type Pounds Weight % Supplier

Water 139.88 16.31

Premix:
Tributoxy Ethyl Phosphate Plasticizer 9.80 1.14 Various
15% Active BYK 346 Thickener 13.10 1.50 Byk Chemie
1% Active Zonyl FSN Leveling Agent 13.06 1.52 Dupont
Diethylene Glycol Ethyl Ether Coalescent 60.42 7.03 Various
Dehydran 1293 Foam Control
Agent 11.40 1.30 Henkel
Syntran 6130 @ 40% N.V. Acrylic Emulsion 612.34 71.20 Interpolymer
______ ______
Yield: 860.00 100.00
pH: 8.6

Procedure:
• Using good agitation add premix ingredients in the order listed. Mix until a homogenous solution
results (20-30 minutes).
• Polymer should be added at a steady rate into the vortex of the batch and allowed to mix for one
hour.

The suggestions and data included are based on information we believe to be reliable. They are offered in good faith, but without guarantee, as conditions and methods of use of our products are beyond our control. We
recommend that the prospective user determine the suitability of our materials and suggestions before adopting them on a commercial scale. It is the buyer’s responsibility to determine the suitability of the above
formulation through quality control and field testing. Suggestions for uses of our products should not be understood as recommendations that they be used in violation of any existing or pending patents.
 SYNTRAN® 6130 ACRYLIC POLYMER
SPECIALTY TOP COAT
WOOD FINISH BASED ON SYNTRAN 6130
Formulation F-43-069-01 30% N.V.
This SYNTRAN 6130 wood formulation is designed for indoor use and exhibits excellent
gloss and durability characteristics on furniture, trim and other non-wear applications.
The formulation dries faster than conventional solvent based finishes and has easy
water cleanup.
Mix in Order Listed:
Type Pounds Weight % Supplier
Water 160.48 18.64
Premix:
Tributoxy Ethyl Phosphate Plasticizer 8.27 0.96 Various
DSX 1514 @ 50% N.V. Thickener 2.48 0.30 Henkel
1% Active Zonyl FSH Leveling Agent 8.27 0.96 Dupont
Dipropylene Glycol Methyl Ether Coalescent 59.58 6.93 Various
Foamaster NDW Foam Control
Agent 0.33 0.00 Cognis
Syntran 6130 @ 40% N.V. Acrylic Emulsion 378.56 44.02 Interpolymer
Hauthane HD 4675 @ 40% N.V. Polyurethane
Dispersion 217.21 25.30 Hauthaway
Syntran 6150 @ 40% N.V. Oxidized Polyethylene
Wax Emulsion 24.82 2.89 Interpolymer
______ ______
Yield: 860.00 100.00

pH: 8.6 + 0.2

Polymer / Polyurethane / Wax Ratio: 61 /35 / 4
Procedure:
• It is recommended that the ingredients be added in the order they are listed under good agitation.
• The plasticizer premix should be prepared and allowed to mix for 20-30 minutes. The premix
should yield a uniform mixture.
• Polymer, polyurethane and wax emulsion should be added separately with 30 minutes of mixing
after the completion of each addition.
• Completed batch should mix for one hour.

The suggestions and data included are based on information we believe to be reliable. They are offered in good faith, but without guarantee, as conditions and methods of use of our products are beyond our control. We
recommend that the prospective user determine the suitability of our materials and suggestions before adopting them on a commercial scale. It is the buyer’s responsibility to determine the suitability of the above
formulation through quality control and field testing. Suggestions for uses of our products should not be understood as recommendations that they be used in violation of any existing or pending patents.
 SYNTRAN® 6130 ACRYLIC POLYMER
SPECIALTY TOP COAT

WOOD FINISH BASED ON SYNTRAN 6130

Formulation F-43-068-02 29% N.V.

This SYNTRAN 6130 wood formulation is designed for indoor use and exhibits
excellent gloss and durability characteristics for wood floors. The formulation has
low odor and cleans up easy with water.
Mix in Order Listed:

Type Pounds Weight % Supplier

Water 124.43 14.46
Premix:
1% Active Zonyl FSN Leveling Agent 9.90 1.15 Dupont
Diethylene Glycol Ethyl Ether Coalescent 49.52 5.76 Various
Dehydran 1293 Foam Control
Agent 16.51 1.92 Henkel
Syntran 6130 Acrylic Emulsion 284.72 33.11 Interpolymer
Hauthane HD 2209 Polyurethane
Dispersion 325.40 37.84 Hauthaway
Syntran 6150 Oxidized Polyethylene
Wax Emulsion 49.52 5.76 Interpolymer
______ ______
Yield: 860.00 100.00
pH: 8.6 + 0.2
Polymer / Polyurethane / Wax Ratio: 46 / 46 / 8
Procedure:
• It is recommended that the ingredients be added in the order they are listed under good agitation.
• The plasticizer premix should be prepared and allowed to mix for 20-30 minutes. The premix
should yield a uniform mixture.
• Polymer, polyurethane and wax emulsion should be added separately with 30 minutes of mixing
after the completion of each addition.
• Completed batch should mix for one hour.

The suggestions and data included are based on information we believe to be reliable. They are offered in good faith, but without guarantee, as conditions and methods of use of our products are beyond our control. We
recommend that the prospective user determine the suitability of our materials and suggestions before adopting them on a commercial scale. It is the buyer’s responsibility to determine the suitability of the above
formulation through quality control and field testing. Suggestions for uses of our products should not be understood as recommendations that they be used in violation of any existing or pending patents.