Image Sensing and Acquisition

Image Sensing and Acquisition
The images are generated by the combination of an “illumination” source and the
reflection or absorption of energy from that source by the elements of the “scene” being imaged.
There are 3 principal sensor arrangements (produce an electrical output proportional to
light intensity).
(i)Single imaging Sensor
(ii)Line sensor
(iii)Array sensor
S.THILAGAVATHI
Panimalar Engineering College
Incoming energy is transformed into a voltage by the combination of input electrical
power and sensor material .
The output voltage waveform is the response of the sensor(s), and a digital quantity is
obtained from each sensor by digitizing its response.
Image Acquisition Using a Single Sensor:

The most common sensor of this type is the photodiode, which is made of silicon
materials and whose output voltage waveform is proportional to light. The use of a filter in front
of a sensor improves selectivity.
For example, a green (pass) filter in front of a light sensor favours light in the green band
of the color spectrum. As a consequence, the sensor output will be stronger for green light than
for other components in the visible spectrum.
2D image generated by displacement in x- and y directions between the sensor and the
area to be imaged.
Fig. shows an arrangement used in high-precision scanning, where a film

negative is mounted onto a drum whose mechanical rotation provides displacement in one
dimension.
The single sensor is mounted on a lead screw that provides motion in the perpendicular
direction, because mechanical motion can be controlled with high precision.
This method is an inexpensive (but slow) way to obtain high-resolution images.
S.THILAGAVATHI
Image Acquisition Using Sensor Strips:
Fig(a) shows the strip provides imaging elements in one direction. Fig(b) shows motion
perpendicular to the strip provides imaging in the other direction. This is the type of arrangement
used in most flatbed scanners.
Sensing devices with 4000 or more in-line sensors are possible. In-line sensors are used
routinely in airborne imaging applications, in which the imaging system is mounted on an
aircraft that flies at a constant altitude and speed over the geographical area to be imaged.
One-dimensional imaging sensor strips that respond to various bands of the
electromagnetic spectrum are mounted perpendicular to the direction of flight. The imaging strip
gives one line of an image at a time, and the motion of the strip completes the other dimension of
a two-dimensional image.
Sensor strips mounted in a ring configuration are used in medical and industrial imaging
to obtain crosssectional (“slice”) images of 3-D objects.
A rotating X-ray source provides illumination and the portion of the sensors opposite the
source collect the X-ray energy that pass through the object. This is the basis for medical and
industrial computerized axial tomography (CAT) imaging.
S.THILAGAVATHI
Image Acquisition using Sensor Arrays:
Fig. An example of the digital image acquisition process. (a)Energy(“illumination”)

source. (b) An element of a scene. (c) Imaging system. (d) Projection of the scene onto the
image plane. (e) Digitized image.
This type of arrangement is found in digital cameras. A typical sensor for these cameras
is a CCD array, which can be manufactured with a broad range of sensing properties and can be
packaged in rugged arrays of 4000 * 4000 elements or more.
The response of each sensor is proportional to the integral of the light energy projected
onto the surface of the sensor, a property that is used in astronomical and other applications
requiring low noise images.
The first function performed by the imaging system in Fig.(c) is to collect the incoming
energy and focus it onto an image plane.
If the illumination is light, the front end of the imaging system is a lens, which projects
the viewed scene onto the lens focal plane as Fig.(d) shows.
The sensor array, which is coincident with the focal plane, produces outputs proportional
to the integral of the light received at each sensor.
The output is a digital image, as shown diagrammatically in Fig.(e).
A Simple Image Formation Model:

An image is defined by two dimensional function f(x,y). The value or amplitude of f at
spatial coordinates (x,y) is a positive scalar quantity. When an image is generated from a
S.THILAGAVATHI
physical process, its value are proportional to energy radiated by physical source. As a
consequence, f(x,y) must be nonzero and finite; that is,
0<f(x,y)<∞
The function f(x,y) may be characterized by two components: (1) the amount of source
illumination incident on the scene being viewed and (2) the amount of illumination reflected by
the objects in the scene. These are called illumination and reflectance components denoted by
i(x,y) and r(x,y) respectively. The two function combine as product to form f(x,y):
f(x,y)=i(x,y) r(x,y)
Where 0 < i(x,y)< ∞ and 0 <r(x,y)< 1 r(x,y)=0 means total absorption r(x,y)=1 means total
reflectance.
We call the intensity of a monochrome image at any coordinates (x,y) the gray level (l) of the
image at that point. That is l=f(x,y).
The interval of l ranges from [0,L-1]. Where l=0 indicates black and l=1 indicates white. All the
intermediate values are shades of gray varying from black to white.
S.THILAGAVATHI

Image Sensing and Acquisition

Uploaded by

Copyright:

Available Formats

Image Sensing and Acquisition

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Image Sensing and Acquisition

Uploaded by

Copyright:

Available Formats

Image Sensing and Acquisition

(i)Single imaging Sensor

Image Acquisition Using a Single Sensor:

Fig. shows an arrangement used in high-precision scanning, where a film

Fig. An example of the digital image acquisition process. (a)Energy(“illumination”)

A Simple Image Formation Model:

You might also like