ENGLISH Easy Setup Guide LED TV

Please read this manual carefully before operating your set and retain it for future reference.
ESPAÑOL Guía Rápida de Configuración
Lea atentamente este manual antes de poner en marcha el equipo y consérvelo para futuras consultas.
FRANÇAIS Guide de configuration rapide
Avant d’utiliser l’appareil, veuillez lire attentivement ce manuel et le conserver pour pouvoir vous y reporter ultérieurement.

AAA

X4
(M4 x L14)

55UF6450 43UF6800
65UF6450 49UF6800
www.lg.com
65UF6490 55UF6800
65UF6800
P/No : MFL68684966 (1509-REV02)
i
ENGLISH Read Safety and Reference.
ESPAÑOL Leer Seguridad y Consultas.
FRANÇAIS Lisez Sécurité et références.

?
 
1 1 2 3

4 5 6
2 ENGLISH Image shown may differ from your TV.
ESPAÑOL La imagen puede ser diferente a la de su televisor.
FRANÇAIS Cette illustration peut ne pas correspondre à votre téléviseur.

A
A
B
 B

AUDIO R VIDEO L/MONO

LAN
DIGITAL
OPTICAL
AUDIO OUT

3
1
/DVI IN

2 (ARC)

PC-AUDIO IN
(4K @ 60Hz)

PC-AUDIO IN

R AUDIO L/MONOPR PB VIDEO/Y

COMPONENT IN / AV IN R AUDIO L/MONOPR PB VIDEO/Y
COMPONENT IN / AV IN
CABLE IN
ANTENNA/

AUDIO VIDEO
3 5

4 1 2

3 4
ENGLISH 43UF6800 49UF6800
MODELS (43UF6800-UA) (49UF6800-UA)
971 x 628 x 180 (mm) 1,104 x 701 x 237 (mm)
With stand
38.2 x 24.7 x 7.0 (inches) 43.4 x 27.5 x 9.3 (inches)
Dimensions (W x H x D)
971 x 570 x 56.4 (mm) 1,104 x 645 x 56.7 (mm)
Without stand
38.2 x 22.4 x 2.2 (inches) 43.4 x 25.3 x 2.2 (inches)
With stand 10.8 kg (23.8 lbs) 14.3 kg (31.5 lbs)
Weight
Without stand 10.5 kg (23.1 lbs) 14.0 kg (30.8 lbs)
Power Requirement AC 100 - 240 V ~ 50 / 60 Hz
Current Value / Power Consumption 1.05 A / 105 W 1.1 A / 110 W

65UF6450
55UF6450 (65UF6450-UA)
(55UF6450-UA)
65UF6490
MODELS (65UF6490-UA)
55UF6800
(55UF6800-UA) 65UF6800
(65UF6800-UA)
1,240 x 778 x 237 (mm) 1,460 x 902 x 263 (mm)
With stand
48.8 x 30.6 x 9.3 (inches) 57.4 x 35.5 x 10.3 (inches)
Dimensions (W x H x D)
1,240 x 722 x 56.7 (mm) 1,460 x 846 x 58.5 (mm)
Without stand
48.8 x 28.4 x 2.2 (inches) 57.4 x 33.3 x 2.3 (inches)
With stand 18.1 kg (39.9 lbs) 27.4 kg (60.4 lbs)
Weight
Without stand 17.8 kg (39.2 lbs) 27.0 kg (59.5 lbs)
Power Requirement AC 100 - 240 V ~ 50 / 60 Hz
Current Value / Power Consumption 1.3 A / 130 W 1.4 A / 140 W
*MFL68684966* ESPAÑOL MODELOS 43UF6800 49UF6800
FRANÇAIS MODÈLES (43UF6800-UA) (49UF6800-UA)
Dimensiones Con base 971 x 628 x 180 (mm) 1 104 x 701 x 237 (mm)
(Ancho x altura x profundidad) Avec support 38,2 x 24,7 x 7,0 (pulgadas / po) 43,4 x 27,5 x 9,3 (pulgadas / po)
Sin base 971 x 570 x 56,4 (mm) 1 104 x 645 x 56,7 (mm)
Dimensions (L x H x P)
Sans support 38,2 x 22,4 x 2,2 (pulgadas / po) 43,4 x 25,3 x 2,2 (pulgadas / po)
Con base
Peso 10,8 kg (23,8 libras / lb) 14,3 kg (31,5 libras / lb)
Avec support
Sin base
Poids 10,5 kg (23,1 libras / lb) 14,0 kg (30,8 libras / lb)
Sans support
Potencia requerida
AC 100 - 240 V ~ 50 / 60 Hz
Alimentation
(For USA and Canada only) Corriente de consumo / Consumo de la potencia
(Para Estados Unidos y Canadá) 1,05 A / 105 W 1,1 A / 110 W
Valeur courante / Consommation électrique
This product qualifies for ENERGY
STAR® in the factory default 65UF6450
(Home configuration) setting. 55UF6450 (65UF6450-UA)
MODELOS (55UF6450-UA) 65UF6490
Changing the factory default
settings or enabling other features (65UF6490-UA)
55UF6800 65UF6800
may increase power consumption that could MODÈLES (55UF6800-UA) (65UF6800-UA)
exceed the limits necessary to quality for ENERGY
Dimensiones Con base 1 240 x 778 x 237 (mm) 1 460 x 902 x 263 (mm)
STAR®. Refer to ENERGYSTAR.gov for more
(Ancho x altura x profundidad) Avec support 48,8 x 30,6 x 9,3 (pulgadas / po) 57,4 x 35,5 x 10,3 (pulgadas / po)
information on the ENERGY STAR® program.
Sin base 1 240 x 722 x 56,7 (mm) 1 460 x 846 x 58,5 (mm)
Dimensions (L x H x P)
(Pour les États-Unis et le Canada) Sans support 48,8 x 28,4 x 2,2 (pulgadas / po) 57,4 x 33,3 x 2,3 (pulgadas / po)
Ce produit est conforme aux Con base
Peso 18,1 kg (39,9 libras / lb) 27,4 kg (60,4 libras / lb)
normes ENERGY STAR® lorsque Avec support
le « réglage d’usine par défaut Sin base
Poids 17,8 kg (39,2 libras / lb) 27,0 kg (59,5 libras / lb)
(Résidentiel) » est sélectionné. Sans support
Modifier les réglages d’usine Potencia requerida
AC 100 - 240 V ~ 50 / 60 Hz
par défaut ou activer d’autres fonctionnalités Alimentation
augmente la consommation d’énergie qui Corriente de consumo / Consumo de la potencia
1,3 A / 130 W 1,4 A / 140 W
pourrait alors dépasser les limites de la Valeur courante / Consommation électrique
qualification ENERGY STAR®. Consultez le site
ENERGYSTAR.gov pour en savoir plus au sujet du
programme ENERGY STAR®.
OWNER’S MANUAL
Safety and Reference
LED TV*
* LG LED TVs are LCD TVs with LED backlighting.

Please read this manual carefully before operating your TV and

retain it for future reference.
43UF6400 43UF6430 55UF6450 55UF6790 43UF6800 43UF6900 43UF7300
49UF6400 49UF6430 65UF6450 65UF6790 49UF6800 49UF6900 49UF7300
55UF6430 55UF6800 55UF7300
49UF6490 65UF6800 60UF7300
65UF6490 65UF7300
70UF7300

*MFL68741506* www.lg.com
P/No : MFL68741506 (1509-REV02)
 Important Safety Instructions Read these instructions. ••
Keep these instructions.
Always comply with the following precautions Heed all warnings.
to avoid dangerous situations and ensure peak Follow all instructions.
performance of your product.
••Do not use this apparatus near water.
WARNING/CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN ••

TO REDUCE THE RISK OF ELECTRIC SHOCK ••Clean only with dry cloth.
DO NOT REMOVE COVER (OR BACK). NO
USER SERVICEABLE PARTS INSIDE. REFER TO
QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead ••
symbol, within an equilateral triangle, is ••Do not block any ventilation openings. Install in
intended to alert the user to the presence of accordance with the manufacturer’s instructions.
uninsulated dangerous voltage within the
product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock
to persons.
The exclamation point within an ••Do not install near any heat sources such
equilateral triangle is intended to alert the as radiators, heat registers, stoves, or other
user to the presence of important operating apparatus (including amplifiers) that produce
and maintenance (servicing) instructions in heat.
ENGLISH

the literature accompanying the appliance. ••

WARNING/CAUTION
- TO REDUCE THE RISK OF FIRE AND ELECTRIC
SHOCK, DO NOT EXPOSE THIS PRODUCT TO
RAIN OR MOISTURE. ••Do not defeat the safety purpose of the
polarized or grounding-type plug. A polarized
WARNING plug has two blades with one wider than the
If you ignore the warning message, you may other. A grounding type plug has two blades ••
be seriously injured or there is a possibility of and a third grounding prong. The wide blade or
accident or death. the third prong are provided for your safety. If
the provided plug does not fit into your outlet,
CAUTION consult an electrician for replacement of the ••
If you ignore the caution message, you may obsolete outlet.
be slightly injured or the product may be
damaged.
NOTE
The note helps you understand and use the ••Protect the power cord from being walked on
product safely. Please read the note carefully or pinched particularly at plugs, convenience
before using the product. receptacles, and the point where they exit from
the apparatus.

WARNING: This product contains chemicals known

to the State of California to cause cancer and birth
defects or other reproductive harm. Wash hands
after handling.
••Only use attachments/accessories specified by
the manufacturer.

2
 ••Use only with the cart, stand, tripod, bracket, or ••CAUTION concerning the Power Cord
table specified by the manufacturer, or sold with (Can differ by country):
the apparatus. When a cart is used, use caution Check the specification page of this owner’s
when moving the cart/apparatus combination to manual to be certain. Do not connect too many
avoid injury from tip-over. appliances to the same AC power outlet as this
could result in fire or electric shock. Do not
overload wall outlets. Overloaded wall outlets,
loose or damaged wall outlets, extension cords,
frayed power cords, or damaged or cracked
••Unplug this apparatus during lightning storms wire insulation are dangerous. Any of these
or when unused for long periods of time. conditions could result in electric shock or fire.
Periodically examine the cord of your appliance,
and if its appearance indicates damage or
deterioration, unplug it, discontinue use of the
appliance, and have the cord replaced with
an exact replacement part by an authorized
••Refer all servicing to qualified service personnel. service. Protect the power cord from physical or
n Servicing is required when the apparatus has mechanical abuse, such as being twisted, kinked,
ns. been damaged in any way, such as power-supply pinched, closed in a door, or walked upon. Pay
cord or plug is damaged, liquid has been spilled particular attention to plugs, wall outlets, and
or objects have fallen into the apparatus, the the point where the cord exits the appliance. Do
apparatus has been exposed to rain or moisture, not move the TV with the power cord plugged
does not operate normally, or has been dropped. in. Do not use a damaged or loose power cord.
Be sure do grasp the plug when unplugging the
power cord. Do not pull on the power cord to
unplug the TV.

ENGLISH
••Do not press strongly upon the panel with a
hand or a sharp object such as a nail, pencil, or
pen, or make a scratch on it. ••Warning - To reduce the risk of fire or electrical
shock, do not expose this product to rain,
moisture or other liquids. Do not touch the TV
with wet hands. Do not install this product near
flammable objects such as gasoline or candles,
••Do not stick metal objects or any other or expose the TV to direct air conditioning.
r conductive material into the power cord. Do
not touch the end of the power cord while it is
plugged in.
••Keep the packing anti-moisture material or
vinyl packing out of the reach of children. ••Do not expose to dripping or splashing and
Anti-moisture material is harmful if swallowed. do not place objects filled with liquids, such as
If swallowed, induce vomiting and go to the vases, cups, etc. on or over the apparatus (e.g.,
nearest hospital. Additionally, vinyl packing can on shelves above the unit).
cause suffocation. Keep it out of the reach of
children.

3
 ••Grounding ••Cleaning ••
(Except for devices which are not grounded.) When cleaning, unplug the power cord and wipe
Ensure that you connect the earth ground gently with a soft cloth to prevent scratching. Do
wire to prevent possible electric shock (i.e. a not spray water or other liquids directly on the
TV with a three-prong grounded AC plug must TV as electric shock may occur. Do not clean with
be connected to a three-prong grounded AC chemicals such as alcohol, thinners, or benzene.
outlet). ••Moving
If grounding methods are not possible, have Make sure the product is turned off, unplugged, ••
a qualified electrician install a separate circuit and all cables have been removed. It may take 2
breaker. Do not try to ground the unit by or more people to carry larger TVs. Do not press
connecting it to telephone wires, lightning rods, or put stress on the front panel of the TV.
or gas pipes. ••Ventilation
Install your TV where there is proper ventilation.
Power
Do not install in a confined space such as a
Circuit
Supply bookcase. Do not cover the product with cloth or
Breaker
other materials while plugged. Do not install in
••As long as this unit is connected to the AC wall excessively dusty places.
outlet, it is not disconnected from the AC power ••If you smell smoke or other odors coming from
source even if the unit is turned off. the TV, unplug the power cord and contact an
••Do not attempt to modify this product in any authorized service center.
way without written authorization from LG ••Keep the product away from direct sunlight.
Electronics. Unauthorized modification could ••Never touch this apparatus or antenna during a ••
void the user’s authority to operate this product. lightning storm.
••Outdoor Antenna Grounding ••When mounting a TV on the wall, make sure not
(Can differ by country): to install the TV by hanging the power and signal
If an outdoor antenna is installed, follow the cables on the back of the TV.
precautions below. An outdoor antenna system ••Do not allow an impact shock or any objects to ••
ENGLISH

should not be located in the vicinity of overhead fall into the product, and do not drop anything
power lines or other electric light or power onto the screen.
circuits, or where it can come in contact with ••DISCONNECTING THE DEVICE FROM THE ••
such power lines or circuits as death or serious MAIN POWER
injury can occur. Be sure the antenna system is The power plug is the disconnecting device.
grounded to provide some protection against In case of an emergency, the Power Plug must
voltage surges and built-up static charges. remain readily accessible.
Section 810 of the National Electrical Code (NEC) ••Batteries
in the U.S.A. provides information with respect Store the accessories (battery, etc.) in a safe
to proper grounding of the mast and supporting location out of the reach of children.
structure, grounding of the lead-in wire to ••This apparatus uses batteries. In your community
an antenna discharge unit, size of grounding there might be regulations that require you
conductors, location of antenna discharge to dispose of these batteries properly due to
unit, connection to grounding electrodes and environmental considerations. Please contact Pr
requirements for the grounding electrode. your local authorities for disposal or recycling yo
Antenna grounding according to the National information.
Electrical Code, ANSI/NFPA 70 ••Do not dispose of batteries in a fire.
••Do not short circuit, disassemble, or allow the
batteries to overheat.
Antenna Lead in Wire ••Do not use high voltage electrical equipment
Antenna Discharge Unit near the TV, (e.g., a bug zapper).
Ground Clamp (NEC Section 810-20)
This may result in product malfunction. ••
Electric Service Grounding Conductor
Equipment (NEC Section 810-21)

Ground Clamp Power Service Grounding

Electrode System
NEC: National Electrical Code (NEC Art 250, Part H)

••

••

4
 ••Dot Defect FCC Notice
pe The panel is a high technology product with
Do resolution of two million to six million pixels. (For USA)
In a very few cases, you could see fine dots on This equipment has been tested and found to
th the screen while you’re viewing the TV. Those comply with the limits for a Class B digital device,
e. dots are deactivated pixels and do not affect the pursuant to Part 15 of the FCC Rules. These limits
performance and reliability of the TV. are designed to provide reasonable protection
d, ••Generated Sound against harmful interference in a residential
2 Cracking noise A cracking noise that occurs installation. This equipment generates, uses
s when watching or turning off the TV is and can radiate radio frequency energy and, if
generated by plastic thermal contraction due to not installed and used in accordance with the
temperature and humidity. This noise is common instructions, may cause harmful interference
n. for products where thermal deformation is to radio communications. However, there is no
required. guarantee that interference will not occur in a
or Electrical circuit humming/panel buzzing particular installation. If this equipment does
A low level noise is generated from a high- cause harmful interference to radio or television
speed switching circuit, which supplies a large reception, which can be determined by turning
amount of current to operate a product. It varies the equipment off and on, the user is encouraged
depending upon the product. This generated to try to correct the interference by one or more of
sound does not affect the performance and the following measures:
reliability of the product. - Reorient or relocate the receiving antenna.
a ••Take care not to touch the ventilation openings. - Increase the separation between the equipment
When watching the TV for a long period, the and the receiver.
ot ventilation openings may become hot. This does - Connect the equipment to an outlet on a circuit
nal not affect the performance of the product or different from that to which the receiver is
cause defects in the product. connected.
••Do not install this product on a wall if it could be - Consult the dealer or an experienced radio/TV

ENGLISH
exposed to oil or oil mist. This may damage the technician for help.
product and cause it to fall.
••If the TV feels cold to the touch, there may This device complies with part 15 of the FCC
be a small flicker when it is turned on. This is Rules. Operation is subject to the following two
normal; there is nothing wrong with TV. Some conditions: (1) this device may not cause harmful
minute dot defects may be visible on the screen, interference and (2) this device must accept any
appearing as tiny red, green, or blue spots. interference received, including interference that
However, they have no adverse effect on the TV’s may cause undesired operation of the device. Any
performance. Avoid touching the LCD screen or changes or modifications in construction of this
holding your finger(s) against it for long periods device which are not expressly approved by the
ty of time. Doing so may produce some temporary party responsible for compliance could void the
distortion effects on the screen. user’s authority to operate the equipment.

Preventing image burn or burn-in on

your TV screen

••If a fixed image displays on the TV screen for

a long period of time, it will be imprinted and
become a permanent disfigurement on the
screen. This is image burn or burn-in and not
covered by the warranty.
••If the aspect ratio of the TV is set to 4:3 for a long
period of time, image burn may occur on the
letterboxed area of the screen.
••Avoid displaying a fixed image on the TV screen
for a long period of time (2 or more hours for
LCD, 1 or more hours for the Plasma TV) to
prevent image burn.
5
 FCC Radio Frequency Interference WARNING P
Requirements (for UNII devices)
(For Canada)
High power radars are allocated as primary users [For product having the wireless function using
of the 5.25 to 5.35 GHz and 5.65 to 5.85 GHz bands. 5 GHz frequency bands]
These radar stations can cause interference with ••
••The device for operation in the band 5150–5250 ••
and/or damage this device. This device cannot be
MHz is only for indoor use to reduce the
co-located with any other transmitter.
potential for harmful interference to co-channel ••
FCC RF Radiation Exposure Statement mobile satellite systems;
••The maximum antenna gain permitted for
[For having wireless function (WLAN, Bluetooth,...)] devices in the bands 5250–5350 MHz and ••
This equipment complies with FCC radiation 5470–5725 MHz shall comply with the EIRP limit;
exposure limits set forth for an uncontrolled and ••
environment. This transmitter must not be ••The maximum antenna gain permitted for
colocated or operating in conjunction with any devices in the band 5725–5825 MHz shall ••
other antenna or transmitter. This equipment comply with the EIRP limits specified for point-
should be installed and operated with minimum to-point and non point-to-point operation as
distance 20 cm (7.8 inches) between the radiator appropriate. ••
and your body. Users must follow the specific ••High-power radars are allocated as primary users
operating instructions for satisfying RF exposure (i.e. priority users) of the bands 5250–5350 MHz
compliance. and 5650–5850 MHz and that these radars could ••
cause interference and/or damage to LE-LAN
Industry Canada Statement devices.
(For Canada) ••
[For having wireless function (WLAN, Bluetooth,...)] Note to Cable/TV Installer
This device complies with RSS-210 of the Industry (For USA and Canada)
ENGLISH

Canada Rules. Operation is subject to the following This reminder is provided to call the CATV system
two conditions: ••
installer’s attention to Article 820-40 of the
1. this device may not cause interference and -
National Electric Code (U.S.A.). The code provides
2. this device must accept any interference, -
guidelines for proper grounding and, in particular,
including interference that may cause undesired specifies that the cable ground shall be connected
operation of the device. to the grounding system of the building, as close
to the point of the cable entry as practical.
IC Radiation Exposure Statement
(For Canada) LG Recycling Policy
[For having wireless function (WLAN, Bluetooth,...)] (For USA)
This equipment complies with IC radiation LG Electronics offers a customized e-waste
exposure limits set forth for an uncontrolled takeback and recycling service that meets
environment. This equipment should be installed local needs and requirements in the countries
and operated with minimum distance 20 cm where e-waste regulations are in place, and also
(7.8 inches) between the antenna & your body. provides product and packaging takeback and ••
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE recycling service voluntarily in some countries.
FOR ANY RADIO OR TV INTERFERENCE CAUSED LG Electronics evaluates products’ recyclability at ••
BY UNAUTHORIZED MODIFICATIONS TO THIS the design step using LG’s recyclability evaluation
EQUIPMENT. SUCH MODIFICATIONS COULD tool, with the goal of improving recyclability where ••
VOID THE USER’S AUTHORITY TO OPERATE THE practicable. Through these activities, LG seeks to
EQUIPMENT. contribute to conserving natural resources and
protecting the environment. ••
For more information about the LG Recycling
Policy, please visit our global site at
••
http://www.lg.com/global/sustainability
environment takeback- recycling
••

6
 Preparing Optional Extras
Optional extras can be changed or modified for
NOTE quality improvement without any notification.
••Image shown may differ from your TV. Contact your dealer for buying these items.
0 ••Your TV’s OSD (On Screen Display) may differ These devices work only with certain models.
slightly from that shown in this manual. The model name or design may be changed due to
el ••The available menus and options may differ from the manufacturer’s circumstances or policies.
the input source or product model that you are (Depending upon model)
using.
••New features may be added to this TV in the AN-VC550 AN-MR6** LG Audio
it; future. Smart Camera Magic Remote Device
••The items supplied with your product may vary AN-WF500
depending upon the model. Wi-Fi/Bluetooth
••Product specifications or contents of this manual Dongle
may be changed without prior notice due to
upgrade of product functions.
••For an optimal connection, HDMI cables and
rs USB devices should have bezels less than 10 mm Maintenance
z (0.39 inches) thick and 18 mm (0.7 inches) width.
d ••Use an extension cable that supports USB 2.0 if
the USB cable or USB flash drive does not fit into Cleaning Your TV
your TV’s USB port. Clean your TV regularly to keep it at peak
••Use a certified cable with the HDMI logo performance and to extend the product’s lifespan.
attached. If you do not use a certified HDMI
cable, the screen may not display or a CAUTION

ENGLISH
connection error may occur.
••Before cleaning, turn the power off and
••Recommended HDMI cable types (3 m or less)
disconnect the power cord and all other cables.
-- High-Speed HDMI®/ TM cable
••When the TV is left unattended or unused for a
-- High-Speed HDMI®/ TM cable with Ethernet
r, long time, disconnect the power cord from the
d wall outlet to prevent possible damage from
lightning or power surges.
B B
Screen, Frame, Cabinet, and Stand
A A To remove dust or light dirt, wipe the surface with
*A 10 mm (0.39 inches) a dry, clean, and soft cloth.
*B 18 mm (0.7 inches) To remove major dirt, wipe the surface with a soft
cloth dampened in clean water or a diluted mild
detergent. Then wipe immediately with a dry cloth.
CAUTION
••Do not use any unapproved items to ensure the CAUTION
safety and product’s lifespan. ••Do not push, rub, or hit the surface with your
••Any damages or injuries by using unapproved fingernail or a sharp object, as this may result in
n items are not covered by the warranty. scratches on the screen and image distortions.
re ••Some models appear to have a thin film on the ••Do not use any chemicals, such as waxes,
screen. It is actually part of the screen; do not benzene, alcohol, thinners, insecticides, air
remove it. fresheners, or lubricants, as these may damage
••When attaching the stand to the TV set, place the screen’s finish and cause discoloration.
the screen facing down on a cushioned table or ••Do not spray liquid onto the surface. If water
flat surface to protect the screen from scratches. enters the TV, it may result in fire, electric shock,
••Make sure that the screws are fastened tightly. or malfunction.
(If they are not fastened securely enough, the TV
may tilt forward after being installed.) Power Cord
••Do not fasten the screws with excessive force; Remove the accumulated dust or dirt on the power
otherwise, they may be worn out and become cord regularly.
loose.

7
 Lifting and Moving the TV Using the Joystick Button M
When moving or lifting the TV, read the following (Depending upon model) (Im
to prevent the TV from being scratched or (Image shown may differ from your TV.)
1
damaged and for safe transportation regardless of You can operate the TV by pressing the button or
its type and size. moving the joystick left, right, up, or down.
••It is recommended to move the TV in the box or
packing material that the TV originally came in. NOTE
••Before moving or lifting the TV, disconnect the
43/49UF6400 does not have a Joystick button but
power cord and all cables.
has only a power On/Off button.

••When holding the TV, the screen

should face away from you to
avoid damage.

••Hold the top and bottom of the TV frame firmly. Joystick Button
Make sure not to hold the transparent part,
speaker, or speaker grille area.

2
Basic Functions
When the TV is turned off, ••
place your finger on the
Power On
joystick button, press it once,
ENGLISH

and release it.

When the TV is turned on,
place your finger on the S
••Use at least two people to move
Power Off joystick button, press it once
for a few seconds, and release
(o
a large TV. it. All running apps will close.
••When transporting the TV by If you place your finger over (D
hand, hold the TV as shown in the Volume the joystick button and move
following illustration. Control it left or right, you can adjust
the volume level.
••When transporting the TV, do not expose the TV If you place your finger over
to jolts or excessive vibration. Channels the joystick button and move
••When transporting the TV, keep the TV upright; Control it up or down, you can scroll
through the saved channels.
never turn the TV on its side or tilt towards the
left or right.
NOTE
••With your finger over the joystick button, move
CAUTION it up, down, left, or right. Be careful not to press
the joystick button. If you press the joystick
••Avoid touching the screen at all times, as this button first, you may not be able to adjust
may result in damage to the screen. the volume level and/or scroll through saved
••Do not place the product on the floor with its channels.
front facing down without padding. Failure to do 1
so may result in damage to the screen. Adjusting the Menu
••Do not move the TV by holding the cable
holders, as the cable holders may break, and When the TV is turned on, press the joystick button
injuries and damage to the TV may occur. one time. You can adjust the menu items moving
(Depending upon model) the joystick button up, down, left, or right. 2
Turns the power off.
Accesses the quick settings.
Clears on-screen displays and returns to TV viewing.
3
Changes the input source.

8
 Mounting on a Table CAUTION
••Make sure that children do not climb on or hang
(Image shown may differ from your TV.) on the TV.
1 Lift and tilt the TV into its upright position on a
table. NOTE
- Leave a 10 cm (4 inches) (minimum) space ••Use a platform or cabinet that is strong and large
from the wall for proper ventilation. enough to support the TV securely.
••Brackets, bolts, and ropes are optional. You can
ut obtain additional accessories from your local
dealer.

10 cm
(4 inches)
Mounting on a Wall
10 cm
10 cm
An optional wall mount can be used with your
m LG Television. Consult with your local dealer for
10 c
a wall mount that supports the VESA standard
used by your TV model. Carefully attach the wall
mount bracket at the rear of the TV. Install the wall
mount bracket on a solid wall perpendicular to the
2 Connect the power cord to a wall outlet.
floor. If you are attaching the TV to other building
materials, please contact qualified personnel to
CAUTION install the wall mount. Detailed instructions will
••Do not place the TV near or on sources of heat, be included with the wall mount. We recommend
as this may result in fire or other damage. that you use an LG brand wall mount. The LG wall
e,
mount is easy to adjust or to connect the cables.

ENGLISH
When you do not use LG’s wall mount bracket,
Securing the TV to a Wall use a wall mount bracket where the device is
adequately secured to the wall with enough space
e
se
(optional) to allow connectivity to external devices. If you are
e. using a non-adjustable mount, attach the mount
(Depending upon model) to the wall. Attach the cables to the TV first, then
e attach the TV to the mount.
t

e
10 cm
(4 inches)

10 cm
10 cm
e
s
10 cm

Make sure to use screws and wall mounts that

1 Insert and tighten the eye-bolts, or TV brackets meet the VESA standard. Standard dimensions for
and bolts on the back of the TV. the wall mount kits are described in the following
on - If there are bolts inserted at the eye-bolts table.
position, remove the bolts first.
2 Mount the wall brackets with the bolts to the
wall. Match the location of the wall bracket and A
the eye-bolts on the rear of the TV.
B
3 Connect the eye-bolts and wall brackets tightly
with a sturdy rope or cable. Make sure to keep
the rope parallel to the flat surface.

9
 Model 43UF6400 49UF6400 Connections (Notifications)
43UF6430 49/55UF6430
43UF6800 49UF6490 ••
You can connect various external devices to the TV. ••
43UF6900 55UF6450 Supported external devices are: HD receivers, DVD
43UF7300 55UF6790 players, VCRs, audio systems, USB storage devices,
49/55UF6800 PC, gaming devices, and other external devices. ••
49UF6900 For more information on an external device’s
49/55UF7300 connection, refer to the manual provided with ••
VESA (A x B) 200 x 200 300 x 300 each device.
Standard screw M6 M6
Number of 4 4
NOTE
screws ••If you record a TV program on a DVD recorder or
Wall mount MSW240 MSW240 VCR, make sure to connect the TV signal input
bracket (optional) LSW240B LSW350B cable to the TV through a DVD recorder or VCR. O
Model 60/65UF7300 70UF7300 For more information about recording, refer to
65UF6450 the manual provided with the connected device. Co
65UF6490 ••The external device connections shown may
differ slightly from illustrations in a manual. pic
65UF6790 de
65UF6800
••Connect external devices to the TV regardless of
the order of the TV port. up
VESA (A x B) 300 x 300 600 x 400
••If you connect a gaming device to the TV, use the
Standard screw M6 M8 cable supplied with the gaming device.
Number of ••Refer to the external equipment’s manual for
4 4
operating instructions. ••
screws
Wall mount ••In PC mode, there may be noise associated
LSW350B LSW640B with the resolution, vertical pattern, contrast -
bracket (optional)
or brightness. If noise is present, change the PC -
output to another resolution, change the refresh ••
rate to another rate, or adjust the brightness and
ENGLISH

CAUTION contrast on the PICTURE menu until the picture

is clear.
••Disconnect the power before moving or ••Depending upon the graphics card, some
installing the TV. Otherwise electric shock may resolution settings may not allow the image to
occur. be positioned on the screen properly.
••Remove the stand before installing the TV on a ••Some USB Hubs may not work. If a USB device
wall mount by performing the stand attachment connected through a USB Hub is not detected, -
in reverse. connect it directly to the USB port on the TV.
••If you install the TV on a ceiling or slanted wall, ••(Smart TV Only) The TV may be capable of
it may fall and result in severe injury. Use an operating without a set-top from a multichannel
authorized LG wall mount and contact the local video programming distributor (MVPD).
dealer or qualified personnel. When using a R
third-party wall mount, it is not covered by the
warranty. (Im
••Do not overtighten the screws as this may cause Connecting to an Antenna or
damage to the TV and void your warranty. Th
••Use the screws and wall mounts that meet the Cable th
VESA standard. Any damages or injuries by th
misuse or using an improper accessory are not Connect an antenna, cable, or cable box to watch ins
covered by the warranty. TV. The RF cable may not be supplied, depending ba
upon the model. to
NOTE th
••Use the screws that are listed in the VESA CAUTION po
standard screw specifications. to
••The wall mount kit includes an installation ••Make sure not to bend the copper wire of the RF
cable. or
manual and necessary parts. pe
••The wall mount bracket is optional. You can
obtain additional accessories from your local Th
dealer. sh
••The length of screws may differ depending upon Copper wire re
the wall mount. Make sure to use the proper
length.
••For more information, refer to the manual ••Complete all connections between devices, and ••
supplied with the wall mount. then connect the power cord to the power outlet
to prevent damage to your TV.

10
 NOTE CAUTION
••Use a signal splitter to use 2 TVs or more. ••Do not mix old and new batteries, as this may
V. ••DTV Audio Supported Codec: MPEG, damage the remote control.
D Dolby Digital.
s,
••Direct ULTRA HD broadcast is unavailable in
areas without an ULTRA HD signal.
••This TV cannot receive ULTRA HD (3840 x 2160
pixels) broadcasts directly because the related
standards have not been confirmed. (Depending
?
upon model)
or

Other Connections
e. Connect your TV to external devices. For the best A
picture and audio quality, connect the external
of device and the TV with the HDMI cable. Depending
upon the model, a cable may not be provided.
he
NOTE
•• j j j PICTURE j
HDMI ULTRA HD Deep Color:
-- On: Support 4K @ 60 Hz (4:4:4, 4:2:2, 4:2:0)
C -- Off: Support 4K @ 60 Hz (4:2:0)
sh
nd
••If the device connected to Input Port also
supports ULTRA HD Deep Color, your picture
A

ENGLISH
e may be clearer. However, if the device doesn’t (POWER) Turns the TV on or off.
support it, it may not work properly. In that case, INPUT Changes the input source.
connect the device to a different HDMI port or
change the TV’s HDMI ULTRA HD Deep Color CAPTION Activates or deactivates the subtitles.
setting to Off. ? (User Guide) Sees user-guide.
-- This feature is available only on certain models RATIO Resizes an image.
which support HDMI ULTRA HD Deep Color.
TV Returns to the last TV channel.
••HDMI Audio Supported Format:
el PCM (32 kHz / 44.1 kHz / 48 kHz / 96 kHz / 192 kHz) Number button Enters numbers.
(Depending upon model) - (Dash) Inserts a dash between numbers such as
2-1 and 2-2.
LIST Accesses the saved channel list.
Remote Control FLASHBK Alternates between the two last
channels selected (pressing repeatedly).
(Image shown may differ from your TV.)
VOL Adjusts the volume level.
The descriptions in this manual are based on
the buttons on the remote control. Please read FAV Accesses your favorite channel list.
this manual carefully and use the TV correctly. To INFO Shows information on the current program.
install batteries, open the battery cover, replace MUTE Mutes all sounds.
batteries (1.5 V AAA) matching the and ends
to the label inside the compartment, and close CH Scrolls through the saved channels.
F
the battery cover. Failure to match the correct PAGE Moves to the previous or next screen.
polarities of the battery may cause the battery
to burst or leak, resulting in fire, personal injury,
or ambient pollution. To remove the batteries,
perform the installation actions in reverse.
This remote uses infrared light. When in use, it
should be pointed in the direction of the TV’s
d remote sensor.
et

11
 Licenses Tr
Supported licenses may differ by model. ••
-
B
For more information about licenses, visit
www.lg.com.
-

-
••
-
-

••
Open Source Software Notice -
Information -
To obtain the source code under GPL, LGPL, MPL,
B and other open source licenses, that is contained in
-

RECENT Shows the previous history. this product, please visit http://opensource.lge.com.
In addition to the source code, all referred license
(Home) Accesses the Home menu. terms, warranty disclaimers and copyright notices
are available for download.
MY APPS Shows the list of Apps.
LG Electronics will also provide open source code
Sp
Accesses the quick menu. to you on CD-ROM for a charge covering the cost
ENGLISH

LIVE MENU Shows the list of Channels. of performing such distribution (such as the cost of Pr
media, shipping, and handling) upon email request pr
Navigation buttons (up/down/left/right) Scrolls
through menus or options. to opensource@lge.com. This offer is valid for three
(3) years from the date on which you purchased Te
OK Selects menus or options and confirms your
the product. AT
input.
BACK Returns to the previous screen.
Pr
EXIT Clears all on-screen displays and returns to EXTERNAL CONTROL DEVICE VH
TV viewing.
SLEEP Sets the length of time until the TV to turns
SETUP
Ex
off.
To obtain the external control device setup 75
Enables VD function. SAP (Secondary information, please visit www.lg.com.
Audio Program) Feature can also be enabled by (Depending upon model)
pressing the key. En
Control buttons ( , , , , ) Controls the ••
SIMPLINK compatible devices (USB, SIMPLINK).
••
Color Buttons These access special functions in
some menus. ( ) ••

••

12
 Troubleshooting Wireless LAN module (WN8122E1)
specification
••Cannot control the TV with the remote control.
-- Check if anything such as tape has been placed (For UF6400, UF6430, UF6450, UF6490, UF6790,
over the receiver. UF6800 series)
-- Check if there is any obstacle between the Standard IEEE802.11a/b/g/n
product and the remote control. 2400 to 2483.5 MHz
Frequency
-- Replace the batteries with new ones. range
5150 to 5250 MHz
••No image display and no sound is produced. 5725 to 5850 MHz
-- Check if the product is turned on. 802.11a: 16.5 dBm
-- Check if the power cord is connected to a wall Output 802.11b: 16 dBm
outlet. power 802.11g: 15.5 dBm
-- Check if there is a problem in the wall outlet by (Max.) 802.11n - 2.4 GHz: 15.5 dBm
connecting other products. 802.11n - 5 GHz: 16.5 dBm
••The TV turns off suddenly. •• Because band channel used by the country could
be different, the user can not change or adjust the
-- Check the power control settings. The power
operating frequency and this product is set for the
supply may be interrupted. regional frequency table.
-- Check if the Sleep Timer / Timer Power Off •• This device should be installed and operated with
feature is activated in the TIMERS settings. minimum distance 20 cm (7.8 inches) between
-- If there is no signal while the TV is on, the TV the device and your body. And this phrase is for
in will turn off automatically after 15 minutes of the general statement for consideration of user
m. inactivity. environment.
•• Contains FCC ID: BEJWN8122E1 /
s Contains IC: 2703H-WN8122E1

Specifications
Wireless Module (LGSBW41)

ENGLISH
of Product specifications may be changed without
est prior notice due to upgrade of product functions. Specifications
ee (For UF6900, UF7300 series)
Television System
Wireless LAN Bluetooth
ATSC, NTSC-M, 64 & 256 QAM Bluetooth
Standard IEEE 802.11a/b/g/n Standard Version
Program Coverage 4.0
2400 to 2483.5 MHz 2400 to
VHF 2-13, UHF 14-69, DTV 2-69, CATV 1-135, CADTV 1-135 Frequency Frequency
5150 to 5250 MHz 2483.5
range range
5725 to 5850 MHz MHz
External Antenna Impedance 802.11a: 11.5 dBm
75 Ω 802.11b: 11 dBm
Output 802.11g: 10.5 dBm Output
10 dBm or
Environment Condition power 802.11n - 2.4 GHz: power
Lower
(Max.) 11 dBm (Max.)
••Operating Temperature 802.11n - 5 GHz:
0 °C to 40 °C (32 °F to 104 °F) 12.5 dBm
••Operating Humidity •• Because band channel used by the country could
Less than 80 % be different, the user can not change or adjust the
••Storage Temperature operating frequency and this product is set for the
- 20 °C to 60 °C (-4 °F to 140 °F) regional frequency table.
••Storage Humidity •• This device should be installed and operated with
Less than 85 % minimum distance 20 cm (7.8 inches) between
the device and your body. And this phrase is for
the general statement for consideration of user
environment.
•• Contains FCC ID: BEJLGSBW41 /
Contains IC: 2703H-LGSBW41

13
CHILD SAFETY:
PROPER TELEVISION PLACEMENT MATTERS
THE CONSUMER ELECTRONICS INDUSTRY CARES
• Manufacturers, retailers and the rest of the consumer electronics industry are committed to
making home entertainment safe and enjoyable.
• As you enjoy your television, please note that all televisions – new and old- must be supported on
proper stands or installed according to the manufacturer’s recommendations. Televisions that
are inappropriately situated on dressers, bookcases, shelves, desks, speakers, chests, carts, etc.,
may fall over, resulting in injury.

TUNE IN TO SAFETY
• ALWAYS follow the manufacturer’s recommendations for the safe installation of your television.
• ALWAYS read and follow all instructions for proper use of your television.
• NEVER allow children to climb on or play on the television or the furniture on which the television
is placed.
• NEVER place the television on furniture that can easily be used as steps, such as a chest of
drawers.
• ALWAYS install the television where it cannot be pushed, pulled over or knocked down.
• ALWAYS route cords and cables connected to the television so that they cannot be tripped
over, pulled or grabbed.

WALL OR CEILING MOUNT YOUR TELEVISION

• ALWAYS contact your retailer about professional installation if you have any doubts about your
ability to safely mount your television.
• ALWAYS use a mount that has been recommended by the television manufacturer and has a
safety certification by an independent laboratory (such as UL, CSA, ETL).
• ALWAYS follow all instructions supplied by the television and mount manufacturers.
• ALWAYS make sure that the wall or ceiling where you are mounting the television is appropriate.
Some mounts are not designed to be mounted to walls and ceilings with steel studs or cinder
block construction. If you are unsure, contact a professional installer.
• Televisions can be heavy. A minimum of two people is required for a wall or ceiling mount
installation.

MOVING AN OLDER TELEVISION TO A NEW PLACE IN

YOUR HOME
• Many new television buyers move their older CRT televisions into a secondary room after the
purchase of a flat-panel television. Special care should be made in the placement of older CRT
televisions.
• ALWAYS place your older CRT television on furniture that is sturdy and appropriate for its size
and weight.
• NEVER place your older CRT television on a dresser where children may be tempted to use the
drawers to climb.
• ALWAYS make sure your older CRT television does not hang over the edge of your furniture.

CE.org/safety
 Declaration of Conformity
Trade Name: LG
Model: 4
 3/49UF6400-UA, 43/49/55UF6430-UB,
49UF6490-UB, 65UF6490-UA,
55/65UF6450-UA, 55/65UF6790-UB,
43/49/55/65UF6800-UA, 43/49UF6900-UC,
43/49/55/60/65/70UF7300-UT
Responsible Party: LG Electronics Inc.
Address: 1000SylvanAve.EnglewoodCliffsNJ07632U.S.A
TEL: 201-266-2534

LG Customer Information Center

For inquires or comments, visit www.lg.com or call;
1-800-243-0000 USA, Consumer User
The model and serial numbers of the TV are located on
1-888-865-3026 USA, Commercial User
the back and on one side of the TV. Record them below
should you ever need service. 1-888-542-2623 CANADA

MODEL Register your product Online!

SERIAL www.lg.com
OWNER’S MANUAL

EXTERNAL CONTROL
DEVICE SETUP
Please read this manual carefully before operating the set and retain it for
future reference.

www.lg.com
 2 KEY CODES

KEY CODES
ENGLISH
ENG

• This feature is not available for all models.

Code Code
Function Note Function Note
(Hexa) (Hexa)
00 CH +, PR + R/C Button 53 List R/C Button
01 CH -, PR - R/C Button 5B Exit R/C Button
02 Volume + R/C Button 60 PIP(AD) R/C Button
03 Volume - R/C Button 61 Blue R/C Button
06 > (Arrow Key / Right Key) R/C Button 63 Yellow R/C Button
07 < (Arrow Key / Left Key) R/C Button 71 Green R/C Button
08 Power R/C Button 72 Red R/C Button
09 Mute R/C Button 79 Ratio / Aspect Ratio R/C Button
0B Input R/C Button 91 AD (Audio Description) R/C Button
0E SLEEP R/C Button 7A User Guide R/C Button
0F TV, TV/RAD R/C Button 7C Smart / Home R/C Button
10 - 19 * Number Key 0 - 9 R/C Button 7E SIMPLINK R/C Button
1A Q.View / Flashback R/C Button 8E ►► (Forward) R/C Button
1E FAV (Favorite Channel) R/C Button 8F ◄◄ (Rewind) R/C Button
20 Text (Teletext) R/C Button AA Info R/C Button
21 T. Opt (Teletext Option) R/C Button AB Program Guide R/C Button
28 Return (BACK) R/C Button B0 ► (Play) R/C Button

30 AV (Audio / Video) Mode R/C Button B1 ꕗ (Stop / File List) R/C Button

ꕘ (Freeze / Slow Play /

39 Caption/Subtitle R/C Button BA R/C Button
Pause)
40 Λ (Arrow Key / Cursor Up) R/C Button BB Soccer R/C Button
V (Arrow Key / Cursor
41 R/C Button BD ꔄ (REC) R/C Button
Down)
42 My Apps R/C Button DC 3D R/C Button
43 Menu / Settings R/C Button 99 AutoConfig R/C Button
44 OK / Enter R/C Button 9F App / * R/C Button
45 Q.Menu R/C Button

4C List, - (ATSC Only) R/C Button

* Key code 4C (0x4C) is available on ATSC/ISDB models which use major/minor channel.
(For South Korea, Japan, North America, Latin America except Colombia models)
 EXTERNAL CONTROL DEVICE SETUP 3

EXTERNAL CONTROL DEVICE SETUP

ENGLISH
ENG
• Image shown may differ from your TV.

Connect the USB to Serial converter/RS-232C input jack to an external control device (such as a computer
or an A/V control system) to control the product’s functions externally.

Note: The type of control port on the TV can be different between model series.

* Please be advised that not all models support this type of connectivity.
* Cable is not provided.

USB to Serial converter with USB Cable

USB Type

USB IN
(PC) (TV)

• LGTV supports PL2303 chip-based (Vendor ID : 0x0557, Product ID :IN0x2008) USB to serial converter
RS-232C
which is not made nor provided by LG. (CONTROL & SERVICE)

(PC)
• It can be purchased from computer stores that carry accessories for IT support professionals.(TV)
RS-232C With RS232C Cable
USB IN

(PC)
DE9 (D-Sub 9pin) Type
1
(TV)
• You need to purchase the RS-232C (DE9, D-Sub 3 9pin female-to-female type) to RS-232C cable required
SERVICE ONLY

for the connection between the PC and the TV, which is specified in the manual.
(PC) (TV)
2 RS-232C IN
(CONTROL & SERVICE)

(PC) (TV)
1
3

(PC)
The connection interface may differ from your TV. 1 (TV)
SERVICE ONLY

3 RS-232C IN
(CONTROL & SERVICE)
2
(PC) (TV)
2

1
3

(PC) (TV)
RS-232C IN
(CONTROL & SERVICE)
2
RS-232C IN
(CONTROL & SERVICE)

RS-232C IN
 IN IN
4 EXTERNAL CONTROL DEVICE SETUP
(PC) (TV)

USB USB
(PC) (TV)
Phone jack Type
ENGLISH

RS-232C IN
• You need to purchase the phone-jack to RS-232 cable required for &the connection between the PC and
ENG

(CONTROL SERVICE)

(PC)
the TV, which is specified in the manual. RS-232C IN
(CONTROL & SERVICE)
(TV)
(PC)
* For other models, connect to the USB port.
(TV)
* The connection interface may differ from your TV.

ONLY ONLY
3

(PC) 1
(TV)

SERVICE
3

(PC) (TV)

SERVICE
2

2
- or
1
3

(PC) 3
1 (TV)
RS-232C IN
(PC) 2
(CONTROL & SERVICE)
(TV)
RS-232C IN
(CONTROL & SERVICE)
2

Customer Computer RS-232C configurations

3-Wire Configurations(Not standard)
1 5 PC TV
RXD
RS-232C IN
2 2 TXD
(CONTROL & SERVICE)
TXD
RS-232C IN
3 1 RXD
(CONTROL & SERVICE)
GND 5 3 GND

6 9 OR
RS-232C RXD 3 2 TXD
(Serial port)
TXD 2 1 RXD
GND 5 3 GND
D-Sub 9 Phone

Set ID
For Set ID number, see "Real Data Mapping" on p.6

1. Press SETTINGS to access the main menus.

2. Press the Navigation buttons to scroll to (*General → About this TV or OPTION) and press OK.
3. Press the Navigation buttons to scroll to SET ID and press OK.
4. Scroll left or right to select a set ID number and select CLOSE. The adjustment range is 1-99.
5. When you are finished, press EXIT.
* (Depending on model)
 EXTERNAL CONTROL DEVICE SETUP 5

Communication Parameters

ENGLISH
ENG
• Baud rate : 9600 bps (UART) • Stop bit : 1 bit
• Data length : 8 bits • Communication code : ASCII code
• Parity : None • Use a crossed (reverse) cable.

Command reference list

(Depending on model)

DATA DATA
COMMAND1 COMMAND2 COMMAND1 COMMAND2
(Hexadecimal) (Hexadecimal)
01. Power* k a 00 to 01 15. Balance k t 00 to 64
16. Color
02. Aspect
k c (p.7) (Colour) x u 00 to 64
Ratio
Temperature
17. ISM
03. Screen
k d (p.7) Method (Only j p (p.8)
Mute
Plasma TV)
04. Volume
k e 00 to 01 18. Equalizer j v (p.8)
Mute
05. Volume 19. Energy
k f 00 to 64 j q 00 to 05
Control Saving
20. Tune
06. Contrast k g 00 to 64 m a (p.9)
Command
21. Channel m b 00 to 01
07.
k h 00 to 64 (Programme)
Brightness
Add/Del(Skip)
08. Color/
k i 00 to 64 22. Key m c Key Codes
Colour
23. Control m g 00 to 64
Backlight,
09. Tint k j 00 to 64
Control Panel
Light
10. 24. Input x b (p.11)
k k 00 to 32
Sharpness select (Main)
11. OSD 25. 3D (Only x t (p.11)
k l 00 to 01
Select 3D models)
12. Remote 26. Extended x v (p.11)
Control Lock k m 00 to 01 3D (Only 3D
Mode models)
27. Auto j u (p.12)
13. Treble k r 00 to 64 Configure

14. Bass k s 00 to 64

* Note: During playing or recording media, all commands except Power (ka) and Key (mc) are not
executed and treated as NG.
With RS232C cable, TV can communicate "ka command" in power-on or power-off status. but with
USB-to-Serial converter cable, the command works only if TV is on.
 6 EXTERNAL CONTROL DEVICE SETUP

Transmission / Receiving Protocol

ENGLISH
ENG

Transmission
[Command1][Command2][ ][Set ID][ ][Data][Cr]

[Command 1] : First command to control the TV. (j, k, m or x)

[Command 2] : Second command to control the TV.
[Set ID] : You can adjust the [Set ID] to choose desired monitor ID number in option menu.
Adjustment range in TV is 1 to 99. If [Set ID] value is selected to ‘0’, every connected set
can be controlled.
* [Set ID] is indicated as decimal (1 to 99) on menu and as Hexadecimal (0x00 to 0x63) on
transmission/receiving protocol.
[DATA] : To transmit command data (hexadecimal). Transmit ‘FF’ data to read status of command.
[Cr] : Carriage Return - ASCII code ‘0x0D’
[ ] : Space – ASCII code ‘0x20’

OK Acknowledgement
[Command2][ ][Set ID][ ][OK][Data][x]

* The set transmits ACK (acknowledgement) based on this format when receiving normal data. At this time,
if the data is data read mode, it indicates present status data. If the data is data write mode, it returns the
data of the PC computer.

Error Acknowledgement
[Command2][ ][Set ID][ ][NG][Data][x]

* The set transmits ACK (acknowledgement) based on this format when receiving abnormal data from
non-viable functions or communication errors.

Data 00: Illegal Code

Real data mapping (Hexadecimal b Decimal)

* When you enter the [data] in hexadecimal, refer to following conversion table.
* Channel Tune (ma) Command uses two-byte hexadecimal value([data]) to select channel number.
00 : Step 0 32 : Step 50 (Set ID 50) FE : Step 254
01 : Step 1 (Set ID 1) 33 : Step 51 (Set ID 51) FF : Step 255
... ... ...
0A : Step 10 (Set ID 10) 63 : Step 99 (Set ID 99) 01 00 : Step 256
... ... ...
0F : Step 15 (Set ID 15) C7 : Step 199 27 0E : Step 9998
10 : Step 16 (Set ID 16) C8 : Step 200 27 0F : Step 9999
... ... ...
 EXTERNAL CONTROL DEVICE SETUP 7

* Commands may work differently depending on model and signal.

ENGLISH
ENG
01. Power (Command: k a) Ack [d][ ][Set ID][ ][OK/NG][Data][x]
►► To control Power *On or Off of the set.
* In case of video mute on only, TV will display On
Transmission[k][a][ ][Set ID][ ][Data][Cr]
Screen Display(OSD). But, in case of Screen mute
on, TV will not display OSD.
Data 00 : Power Off 01 : *Power On

Ack [a][ ][Set ID][ ][OK/NG][Data][x]

04. Volume Mute (Command: k e)
►► To Show TV is Power On or *Off ►► To control volume mute on/off.
Transmission [k][a][ ][Set ID][ ][FF][Cr] You can also adjust mute using the MUTE button
on remote control.
Ack [a][ ][Set ID][ ][OK][Data][x]
Transmission [k][e][ ][Set ID][ ][Data][Cr]
* Similarly, if other functions transmit ‘FF’ data
Data 00 : Volume mute on (Volume off)
based on this format, Acknowledgement feedback
01 : Volume mute off (Volume on)
presents status about each function.
Ack [e][ ][Set ID][ ][OK/NG][Data][x]

02. Aspect Ratio (Command: k c)

(Main Picture Size) 05. Volume Control (Command: k f)
►► To adjust the screen format. (Main picture format)
►► To adjust volume.
You can also adjust the screen format using the
You can also adjust volume with the volume
Aspect Ratio in the Q.MENU. or PICTURE menu.
buttons on remote control.
Transmission [k][c][ ][Set ID][ ][Data][Cr] Transmission [k][f][ ][Set ID][ ][Data][Cr]

Data 01 : Normal screen 07 : 14:9 Data Min : 00 to Max : 64

(4:3) (Europe, Colombia, Mid-East, Ack [f][ ][Set ID][ ][OK/NG][Data][x]
02 : Wide screen Asia except South Korea and
(16:9) Japan)
04 : Zoom 09 : * Just Scan
05 : Zoom 2 0B : Full Wide 06. Contrast (Command: k g)
(Latin America (Europe, Colombia, Mid- ►► To adjust screen contrast.
except Colombia East, Asia except South You can also adjust contrast in the PICTURE
Only) Korea and Japan) menu.
06 : Set by Program/ 10 to 1F : Cinema Zoom 1 to 16
Transmission [k][g][ ][Set ID][ ][Data][Cr]
Original 0c : 21:9 (Depending on model)
Data Min : 00 to Max : 64
Ack [c][ ][Set ID][ ][OK/NG][Data][x]
Ack [g][ ][Set ID][ ][OK/NG][Data][x]
* Using the PC input, you select either 16:9 or 4:3
screen aspect ratio.
* In DTV/HDMI/Component mode (high-definition), 07. Brightness (Command: k h)
Just Scan is available. ►► To adjust screen brightness.
* Full wide mode may work differently based on You can also adjust brightness in the PICTURE
model and is supported for DTV fully, and ATV, menu.
AV partially. Transmission [k][h][ ][Set ID][ ][Data][Cr]

Data Min : 00 to Max : 64

03. Screen Mute (Command: k d) Ack [h][ ][Set ID][ ][OK/NG][Data][x]
►► To select screen mute on/off.
Transmission [k][d][ ][Set ID][ ][Data][Cr]
Data 00 : Screen mute off (Picture on) 08. Color/Colour (Command: k i)
Video mute off ►► To adjust the screen Color(Colour).
01 : Screen mute on (Picture off) You can also adjust colour in the PICTURE menu.
10 : Video mute on
Transmission [k][i][ ][Set ID][ ][Data][Cr]
 8 EXTERNAL CONTROL DEVICE SETUP

Data Min : 00 to Max : 64 * (Depending on model)

ENGLISH

Ack [i][ ][Set ID][ ][OK/NG][Data][x]

ENG

14. Bass (Command: k s)

09. Tint (Command: k j) ►► To adjust Bass.
►► To adjust the screen tint. You can also adjust in the AUDIO menu.
You can also adjust tint in the PICTURE menu.
Transmission [k][j][ ][Set ID][ ][Data][Cr] Transmission [k][s][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64
Data Red : 00 to Green : 64
Ack [s][ ][Set ID][ ][OK/NG][Data][x]
Ack [j][ ][Set ID][ ][OK/NG][Data][x]
* (Depending on model)

15. Balance (Command: k t)

10. Sharpness (Command: k k)
►► To adjust balance.
►► To adjust the screen sharpness. You can also adjust balance in the AUDIO menu.
You can also adjust sharpness in the PICTURE
menu. Transmission [k][t][ ][Set ID][ ][Data][Cr]

Transmission [k][k][ ][Set ID][ ][Data][Cr] Data Min : 00 to Max : 64

Data Min : 00 to Max : 32 Ack [t][ ][Set ID][ ][OK/NG][Data][x]

Ack [k][ ][Set ID][ ][OK/NG][Data][x]

16. Color(Colour) Temperature (Command: x u)

►► To adjust colour temperature. You can also adjust
11. OSD Select (Command: k l)
Color(Colour) Temperature in the PICTURE menu.
►► To select OSD (On Screen Display) on/off when
controlling remotely. Transmission [x][u][ ][Set ID][ ][Data][Cr]

Transmission [k][l][ ][Set ID][ ][Data][Cr] Data Min : 00 to Max : 64

Ack [u][ ][Set ID][ ][OK/NG][Data][x]
Data 00 : OSD off 01 : OSD on

Ack [l][ ][Set ID][ ][OK/NG][Data][x]

17. ISM Method (Command: j p) (Only Plasma TV)
►► To control the ISM method. You can also adjust
12. Remote control lock mode (Command: k m) ISM Method in OPTION menu.
►► To lock the front panel controls on the monitor and Transmission [j][p][ ][Set ID][ ][Data][Cr]
remote control.
Data Min : 02: Orbiter
Transmission [k][m][ ][Set ID][ ][Data][Cr] 08: Normal
20: Color(Colour) Wash
Data 00 : Lock off 01 : Lock on
Ack [p][ ][Set ID][ ][OK/NG][Data][x]
Ack [m][ ][Set ID][ ][OK/NG][Data][x]

* If you are not using the remote control, use this

mode. 18. Equalizer (Command : j v)
When main power is off & on (plug-off and plug-in, ►► Adjust EQ of the set.
after 20 - 30 seconds), external control lock is Transmission [j][v][ ][Set ID][ ][Data][Cr]
released.
MSB LSB
* In the standby mode (DC off by off timer or ‘ka’,
‘mc’ command), and if key lock is on, TV will not 0 0 0 0 0 0 0 0
turn on by power on key of IR & Local Key.

13. Treble (Command: k r) Frequency Data

►► To adjust treble.
You can also adjust in the AUDIO menu. 7 6 5 Frequency 4 3 2 1 0 Step
0 0 0 1st Band 0 0 0 0 0 0(decimal)
Transmission [k][r][ ][Set ID][ ][Data][Cr]
0 0 1 2nd Band 0 0 0 0 1 1(decimal)
Data Min : 00 to Max : 64
0 1 0 3rd Band ... ... ... ... ... ...
Ack [r][ ][Set ID][ ][OK/NG][Data][x]
0 1 1 4th Band 0 0 0 1 1 19(decimal)
 EXTERNAL CONTROL DEVICE SETUP 9

1 0 0 5th Band 0 0 1 0 1 20(decimal)

Set ID = All = 00

ENGLISH
Data 00 & 01 = Channel Data is 10 = 00 0a
Acknowledgement [v][ ][Set ID][ ][OK/NG][Data][x]

ENG
Data 02 = Analog Antenna TV = 00
* It depends on model, and can adjust when sound Result = ma 00 00 0a 00
mode is EQ adjustable value.
2. Tune to the digital antenna (DVB-T) Channel 01.
Set ID = All = 00
19. Energy Saving (Command: j q)
Data 00 & 01 = Channel Data is 1 = 00 01
►► To reduce the power consumption of the TV. You Data 02 = Digital Antenna TV = 10
can also adjust Energy Saving in PICTURE menu. Result = ma 00 00 01 10
Transmission [j][q][ ][Set ID][ ][Data][Cr]
3. Tune to the satellite (DVB-S) Channel 1000.
Data Set ID = All = 00
00 : Off Data 00 & 01 = Channel Data is 1000 = 03 E8
01 : Minimum Data 02 = Digital Satellite TV = 40
02 : Medium Result = ma 00 03 E8 40
03 : Maximum
04 : Auto (For LCD TV / LED TV) / Ack [a][ ][Set ID][ ][OK][Data 00][Data 01]
Intelligent sensor (For PDP TV) [Data 02][x][a][ ][Set ID][ ][NG][Data 00][x]
05 : Screen off
• For South Korea, North/Latin America except
* (Depending on model)
Colombia Model
Ack [q][ ][Set ID][ ][OK/NG][Data][x] ►► To tune channel to following physical/major/minor
number.
Transmission [m][a][ ][0][ ][Data00][ ][Data01]
20. Tune Command (Command: m a) [ ][Data02][ ][Data03][ ][Data04][ ][Data05][Cr]
* This command may work differently depending on Digital channels have a Physical, Major, and Minor
model and signal. channel number. The Physical number is the actual
• For Europe, Mid-East, Colombia, Asia except digital channel number, the Major is the number that
South Korea and Japan Model the channel should be mapped to, and the Minor is
►► Select channel to following physical number. the sub-channel. Since the ATSC tuner automatically
maps the channel from the Major / Minor number,
Transmission [m][a][ ][Set ID][ ][Data 00][ ] the Physical number is not required when sending a
[Data 01][ ][Data 02][Cr] command in Digital.
* Analog Antenna/Cable
* Analog Antenna/Cable
Data 00 : Physical Channel Number
[Data 00][Data 01] Channel Data
- Antenna (ATV) : 02~45 (Decimal: 2 ~ 69)
Data 00 : High byte channel data
- Cable (CATV) : 01, 0E~7D (Decimal : 1, 14~125)
Data 01 : Low byte channel data
- 00 00 ~ 00 C7 (Decimal : 0 ~ 199)
[Data 01 ~ 04]: Major/Minor Channel Number
Data 01 & 02: xx (Don't care)
Data 02 : Input Source (Analog)
Data 03 & 04: xx (Don't care)
- 00 : Antenna TV (ATV)
Data 05: Input Source (Analog)
- 80 : Cable TV (CATV)
- 00 : Antenna TV (ATV)
* Digital Antenna/Cable/Satellite - 01 : Cable TV (CATV)
* Digital Antenna/Cable
[Data 00][Data 01]: Channel Data
Data 00 : High Channel data
Data 00 : xx (Don't care)
Data 01 : Low Channel data
- 00 00 ~ 27 0F (Decimal: 0 ~ 9999)
[Data 01][Data 02]: Major Channel Number
Data 01 : High byte Channel Data
Data 02 : Input Source (Digital)
Data 02 : Low byte Channel Data
- 10 : Antenna TV (DTV)
- 00 01 ~ 27 0F (Decimal: 1 ~ 9999)
- 20 : Antenna Radio (Radio)
[Data 03][Data 04]: Minor Channel Number
- 40 : Satellite TV (SDTV)
Data 03 : High byte Channel Data
- 50 : Satellite Radio (S-Radio)
Data 04 : Low byte Channel Data
- 90 : Cable TV (CADTV)
- a0 : Cable Radio (CA-Radio)
Data 05 : Input Source (Digital)
- 02 : Antenna TV (DTV) – Use Physical Channel
* Tune Command Examples: Number
1. Tune to the Analog antenna (PAL) Channel 10. - 06 : Cable TV (CADTV) – Use Physical Channel
 10 EXTERNAL CONTROL DEVICE SETUP

Number Data 05 = Digital Antenna TV = 02

ENGLISH

- 22 : Antenna TV (DTV) – Don’t Use Physical Total = ma 00 00 00 11 00 01 02

ENG

Channel Number
- 26 : Cable TV (CADTV) - Don’t Use Physical
2. Tune to the BS (ISDB-BS) channel 30.
Channel Number
Set ID = All = 00
- 46 : Cable TV (CADTV) – Use Major Channel
Data 00 = Don’t know Physical = 00
Number Only (One Part Channel)
Data 01 & 02 = Major is 30 = 00 1E
Two bytes are available for each major and minor
Data 03 & 04 = Don’t Care = 00 00
channel data, but usually the low byte is used alone
Data 05 = Digital BS TV = 07
(high byte is 0).
Total = ma 00 00 00 1E 00 00 07
* Tune Command Examples: * This feature is varied based on the model.
1. Tune to the Analog cable (NTSC) channel 35.
Ack [a][ ][Set ID][ ][OK][Data 00][Data 01]
Set ID = All = 00
Data 00 = Channel Data is 35 = 23 [Data 02][Data 03][Data 04][Data 05]
Data 01 & 02 = No Major = 00 00 [x][a][ ][Set ID][ ][NG][Data 00][x]
Data 03 & 04 = No Minor = 00 00
Data 05 = Analog Cable TV = 01
Total = ma 00 23 00 00 00 00 01
2. Tune to the digital antenna (ATSC) channel 30-3.
21. Channel(Programme) Add/Del(Skip)
Set ID = All = 00 (Command: m b)
Data 00 = Don’t know Physical = 00 ►► To skip current channel(programme) for next time.
Data 01 & 02 = Major is 30 = 00 1E Transmission [m][b][ ][Set ID][ ][Data][Cr]
Data 03 & 04 = Minor is 3 = 00 03
Data 05 = Digital Antenna TV = 22 Data 00 : Del(ATSC,ISDB)/Skip(DVB) 01 : Add
Total = ma 00 00 00 1E 00 03 22
Ack [b][ ][Set ID][ ][OK/NG][Data][x]
Ack [a][ ][Set ID][ ][OK][Data 00][Data 01]
[Data 02][Data 03][Data 04][Data 05] * Set the saved channel status to del(ATSC, ISDB)/
skip(DVB) or add.
[x][a][ ][Set ID][ ][NG][Data 00][x]
• For Japan Model
►► To tune channel to following physical/major/minor 22. Key (Command: m c)
number. ►► To send IR remote key code.
Transmission [m][a][ ][0][ ][Data00][ ][Data01] Transmission [m][c][ ][Set ID][ ][Data][Cr]
[ ][Data02][ ][Data03][ ][Data04][ ][Data05][Cr]

* Digital Antenna/Satellite Data Key code - p.2.

Data 00: xx (Don't care) Ack [c][ ][Set ID][ ][OK/NG][Data][x]
[Data 01][Data 02]: Major Channel Number 23. Control Backlight (Command: m g)
Data 01: High byte Channel Data • For LCD TV / LED TV
Data 02: Low byte Channel Data ►► To control the backlight.
- 00 01 ~ 27 0F (Decimal: 1 ~ 9999)
Transmission [m][g][ ][Set ID][ ][Data][Cr]
[Data 03][Data 04]: Minor/Branch Channel Number
Data Min : 00 to Max : 64
(Don’t care in Satellite)
Data 03: High byte Channel Data Ack [g][ ][Set ID][ ][OK/NG][Data][x]
Data 04: Low byte Channel Data
Control Panel Light (Command: m g)
Data 05 : Input Source (Digital/Satellite for Japan)
- 02 : Antenna TV (DTV) • For Plasma TV
- 07 : BS (Broadcasting Satellite) ►► To control the panel light.
- 08 : CS1 (Communication Satellite 1) Transmission [m][g][ ][Set ID][ ][Data][Cr]
- 09 : CS2 (Communication Satellite 2)
Data Min : 00 to Max : 64
* Tune Command Examples:
1 Tune to the digital antenna (ISDB-T) channel 17-1. Ack [g][ ][Set ID][ ][OK/NG][Data][x]
Set ID = All = 00
Data 00 = Don’t know Physical = 00
Data 01 & 02 = Major is 17 = 00 11
Data 03 & 04 = Minor/Branch is 1 = 00 01
 EXTERNAL CONTROL DEVICE SETUP 11

24. Input select (Command: x b) 00 O O O

ENGLISH
(Main Picture Input)
01 X X X

ENG
►► To select input source for main picture.
02 X X X
Transmission [x][b][ ][Set ID][ ][Data][Cr]
03 X O O
Data
00 : DTV 01 : CADTV X : don’t care
02 : Satellite DTV 10 : ATV
ISDB-BS (Japan) Ack [t][ ][Set ID][ ][OK][Data00][Data01][Data02]
03 : ISDB-CS1 (Japan) [Data03][x]
04 : ISDB-CS2 (Japan) [t][ ][Set ID][ ][NG][Data00][x]
11 : CATV
20 : AV or AV1 21 : AV2
40 : Component1 41 : Component2 26. Extended 3D(Command: x v) (only 3D models)
60 : RGB (Depending on model)
►► To change 3D option for TV.
90 : HDMI1 91 : HDMI2
92 : HDMI3 93 : HDMI4 Transmission [x][v][ ][Set ID][ ][Data 00][ ]
[Data 01][Cr]
Ack [b][ ][Set ID][ ][OK/NG][Data][x]
[Data 00] 3D option
* This function depends on model and signal. 00 : 3D Picture Correction
01 : 3D Depth (3D Mode is Manual Only)
02 : 3D Viewpoint
25. 3D(Command: x t) (only 3D models) 06 : 3D Color Correction
(Depending on model) 07 : 3D Sound Zooming
►► To change 3D mode for TV. 08 : Normal Image View
09 : 3D Mode (Genre)
Transmission [x][t][ ][Set ID][ ][Data 00][ ][Data 01]
[ ][Data 02][ ][Data 03][Cr] [Data 01] It has own range for each 3D option
* (Depending on model) determined by [Data 00].
Data Structure 1) When [Data 00] is 00
[Data 00] 00 : 3D On 00 : Right to Left
01 : 3D Off 01 : Left to Right
02 : 3D to 2D
03 : 2D to 3D 2) When [Data 00] is 01, 02
[Data 01] 00 : Top and Bottom Data Min: 0 - Max: 14 (*transmit by Hexadecimal
01 : Side by Side code)
02 : Check Board Data value range(0 - 20) converts Viewpoint range
03 : Frame Sequential (-10 - +10) automatically (Depending on model)
04 : Column interleaving * This option works when 3D Mode (Genre) is manual
05 : Row interleaving only.
[Data 02] 00 : Right to Left
01 : Left to Right 3) When [Data 00] is 06, 07
[Data 03] 3D Effect(3D Depth): Min : 00 - Max : 14 00 : Off
(*transmit by Hexadecimal code) 01 : On
* [Data 02], [Data 03] functions depend on model
and signal. 4) When [Data 00] is 08
00 : Revert to 3D video from 3D-to-2D
* If [Data 00] is 00 (3D On), [Data 03] has no converted 2D video
meaning. 01 : Change 3D video to 2D video, except
* If [Data 00] is 01 (3D off) or 02 (3D to 2D), [Data 2D-to-3D video
01], [Data 02] and [Data 03] have no meaning. * If conversion condition doesn’t meet, command is
* If [Data 00] is 03 (2D to 3D), [Data 01] and treated as NG.
[Data 02] have no meaning.
5) When [Data 00] is 09
* If [Data 00] is 00 (3D On) or 03 (2D to 3D), [Data
03] works when 3D Mode (Genre) is manual only. 00 : Standard 01 : Sport
* All 3D pattern options ([Data 01]) may not be 02 : Cinema 03 : Extreme
available according to broadcasting/video signal. 04 : Manual 05 : Auto

Ack [v][ ][Set ID][ ][OK][Data00][Data01][x]

[Data 00] [Data 01] [Data 02] [Data 03]
[v][ ][Set ID][ ][NG][Data00][x]
 12 EXTERNAL CONTROL DEVICE SETUP

27. Auto Configure (Command: j u)

ENGLISH

(Depending on model)
ENG

►► To adjust picture position and minimize image

shaking automatically. It works only in RGB (PC)
mode.
Transmission [j][u][ ][Set ID][ ][Data][Cr]
Data 01 : To set

Ack [u][ ][Set ID][ ][OK/NG][Data][x]