FHX8000C Carrier-grade Media Gateway Controller

Introduction
FHX8000C Carrier-grade Media Gateway Controller
resides on the control layer of NGN. It performs call
control, signaling gateway, billing report, EMS.
FHX8000C is carrier-grade large capacity, high availability
MGC.

Feature
¾
High integration： Media gateway controller,
Signaling gateway, Billing interface & EMS
¾ Class 5 features for residential subscribers and
business customers, Class 4 features for
long-distance operators.
¾ Telecom basic services, supplementary services,
and IN interface.
¾ Full-featured C7/SS7 link.
¾ FCAPS (Fault, Configuration, Accounting,
Performance & Security)
¾ EMS interface：SNMP，CLI，CORBA，XML
¾ EMS based on JAVA GUI and Server, multiple clients simultaneous operator
¾ Redundancy

Parameter
¾ Each softswitch system can expand to 16 pairs of FHX8000C nodes
¾ BHCA：a pair of nodes is 1M BHCA，the system maximum reaches 16M BHCA
¾ Signaling point code：256 local signaling point code, one-way send/receive maximum is
1,048,576 SS7. Single node supports 128 A-links and F-links.
¾ 99.999% reliability
¾ Protocol：SIP，H.323，H.248，MGCP，SIP-I/SIP-T

Expandability
¾ Each system supports from one to sixteen pairs of FHX8000C.
¾ Centralization or distributed architecture, to meet layering building network demand.
¾ Flexibly policy of call traffic load balance between nodes.

1
FHX3000C Carrier-grade Trunk Media Gateway

Introduction
FHX3000C Trunk Media Gateway resides on access layer of NGN. It
performs transfer media stream between PSTN and packet switched
network. FHX3000C is a high-density multimedia gateway.

Feature
¾ The T8000 MG provides an ultra scalable multi-fabric
system implementing a cell/frame matrix and a TDM
matrix.
¾ The FHX3000C provides the 'any-to-any' relationship
between various types of traffic including TDM, ATM
(AAL1 and AAL2), and VoIP through channelized and
packet interfaces.
¾ It provides physical network access via a wide range of
channelized and non-channelized network interface
options(TDM, ATM, and IP) along with a host of
signaling capabilities, including ATM, UNI
(User-to-Network Interface), PNNI (Private
Network-to-Network Interface), PRI (Primary Rate
Interface), CAS (Channel Associated Signaling), and
V5.2.
¾ Circuit interface and data interface flexibly upgrade.
¾ High reliability: service card 1+1 backup or 1+N redundancy backup, network interface
card 1+1 backup.

Parameter
¾ High density ports: 128K DS0 non-blocking redundant TDM switch matrix and a
20Gbps + 20Gbps redundant cell/frame matrix.
¾ Maximum 840 E1/T1 trunk
¾ 44,000 VOIP call at the same time
¾ Circuit interface(channelized)：E1、T1、DS3、OC-3/STM-1(2 ports)、OC-3/STM-1(4
ports)、STM-4
¾ Packet interface(non-channelized) ： DS3 、 OC-3/STM-1c 、 OC-12c/STM-4c 、
OC-48c/STM-16c、GbE
¾ 40800 channels Echo Cancellation
¾ Integrated Media Server, support 1023 voice file and 2094 seconds voice play, and
support MF/DTMF and re-dial
¾ Protocol
‹ ISDN PRI
‹ V5.2/GR-303
‹ CAS/R1/R2

2
 ‹ DTMF/MF
‹ ATM

FHX3000 Trunk Media Gateway

Introduction
FHX3000 is a trunk media gateway resides on the access
layer of NGN. It performs functions of media mapping
and code transfer between packet network and circuit
switched network, which can terminate circuit switched
network facilities (including trunk lines and etc.) and
transfer media stream on ATM/IP network.

Feature
¾ Broad interoperability with leading vendor’s platforms
¾ Protocol
‹ H.248/MEGACO, MGCP, H.323, SIP
‹ T.30/T.38
‹ Voice code: G.711a, G.711u, G.723, G.729a，G.726,G.727
‹ Signaling： ISDN PRI, R2，SS7（Maximun 12 E1s）
¾ Interface
‹ PSTN side：T1/E1
‹ IP side：10/100 BASE-T
¾ Network management
‹ Web, CLI, SNMPv2, FTP, HTTP

Function
¾ Call transfer; call waiting, IP Centrex, call back and etc.
¾ Support IP bar and profession billing software and accounting device
¾ Build-in signaling process function： R2、ISDN PRI、SS7
¾ DTMP detection/generation and automatic identification/response to voice and fax
signals.
¾ Identification IP fax calling and automatic establish fax calling.
¾ Voice technical：VAD、CNG、EC、AGC、and Jitter Buffer

3
4
FHX984X Series Accounting System

Introduction
FHX984X series accounting system is a telephone accounting program based-on Windows
ststem, which via TCP/IP application protocol to communicate with AG/IAD and realize voice
billing management of AG/IAD.
FHX9841 software runs on the computer in IP bar, and intercommunicate with AG/IAD via
IP network. IP bar manager can configure every phone’s right. This is real-time billing system.
When customers checked, according to billing rate and favourable plan this system can calculate
call charge.
FHX9842 software runs on computer in hotel, and intercommunicate with AG/IAD via IP
network. Hotel waiter can configure every phone’s right in the room. This is real-time billing
system. Hotel waiter can know the calling fee of every room. When customer checked out,
according to billing rate and favourable plat this system can calculate call charge.

Feature
¾ Real time accounting and call control
¾ Common billing rate, and comply with national every carrier billing standard.
¾ All initialization parameter flexibly configuration.
¾ High security, two level right management between manager and clerk.

Feature
¾ Phone power configure：calling、called、international long-distance、home-area toll、
local call、free call
¾ Real time billing, tariff and rate management
¾ Real time supervise network break off

5
 ¾ Phone status management：authorize、closedown、break down
¾ AG/IAD and Phone management：search、add/delete IAD/AG and phone
¾ Power management：configure manager and clerk power
¾ Users’ room modify, group check-out (FHX9842)）
¾ Information storage, backup, modify, delete and recover.
¾ Statistic, report, search and print function.
¾ Help, note, alarm and log function.

Performance
¾ Hardware：CPU：ＰⅢ or over；EMS memory：256 M or over；
Work with FiberHome AG/IAD
¾ Software： Windows98, Windows 2000, Windows XP system

6
FHX9900 Network Management System

Introduction
FHX9900 is a robust and highly-available network
management system for wide range FiberHome’s softswitch
devices such as IAD, AG, MGC and etc. NMS is
independently researched by FiberHome, which includes
FHX996 EMS and FHX9980 NMS.

Feature
¾ Flexibly client interface：Local access and remote access，several clients simultaneity
operation
¾ Security： Network management data backup and recovery, level right operation.
¾ Users’ interface characteristic：Windows, motif, menu to show the interfaces.
¾ Color Level：Different alarm levels are marked with different colors.
¾ Interface：SNMP，Telnet，FTP/TFTP，XML，SYSLOG，RMI，OML

Function
¾ Security：Subscriber management, group management, right management, register
management.
¾ Configuration management： Element basic parameter check, modify management,
protocols management, basic operation configuration (reset, restart) and etc.
¾ Alarm management：Alarm view, alarm shield filter, alarm information show, alarm

7
 information print.
¾ Performance Management： Element port performance( access device)、Element CUP
percent
¾ Element Tree Management： Node addition or delete, information statistic
¾ Element Upgrade：Remote software version upgrade, configure data backup and
recovery.
¾ Register Management： active management and passive management

8
FHX1000 Series Integrated Access Device

Introduction
FHX1000 Series Integrated Access Device resides on the
access layer of Next Generation Network (NGN). It supplies
FXS, FXO, xDSL and Ethernet. Adopting international
standard protocol, FHX1000 Series Integrated Access Device
supplies various access services for users and satisfies users’
need of voice, data and fax services.

Feature
¾ Adapt to subscriber’s different ports: 1～32 ports
¾ Broad interoperability with leading vendor’s platforms
¾ A key resume button. Press “a key resume button” can resume pre-configuration
¾ Simulate audio mixers conference supported
¾ Build-in switch chips can divide VLAN, set priorities, VID, ToS, and support QoS
¾ Lightning protection
¾ Uplink interface: 10/100M FE/single/multi-module optical interface /ADSL
¾ Downlink interface: users’ cable, trunk line, and data wire
¾ Protocol：H.248，MGCP，H.323，SIP，T.30/T.38
¾ Voice code：G.711a，G.711u，G.723，G.729a

Function
¾ Polarity reversal
¾ Call transfer, call waiting, IP Centrex、call back and etc
¾ Support remote power supply
¾ Special billing software (FHX984x) of IP phone bar supported
¾ Voice technology
¾ VAD( Voice Activity Detection), CNG(Comfort Noise Generation) ,EC(Echo
Cancellation), AGC(Automatic Gain Control), and Jitter Buffer

Application Architecture

9
 FHX1900 Series IP phone

Introduction
FHX1900 Series IP phone is the terminal product that resides on
the access layer of NGN. FHX1900 can supply subscribers with
voice/ video communication over IP network.

Feature
¾ Protocol: SIP, H.263，H.263+，MPEG4
¾ Voice codec: G.711a，G.711u，G.723，G.729a
¾ Interface: 10/100M

Function
¾ Call transfer, call waiting, IP Centrex、call back and etc
¾ special billing software (FHX9841) of IP phone bar Supported
¾ Real-time multimedia communication: support voice, video real-time multimedia
communication and etc
¾ Telephone book
¾ records of past call
¾ Picture-in-picture
¾ Voice technology
¾ VAD( Voice Activity Detection), CNG(Comfort Noise Generation) ,EC(Echo
Cancellation), AGC(Automatic Gain Control), and Jitter Buffer

10
 FHX2000 series Access Media Gateway

Introduction
FHX2000 Series Access Media Gateway resides on the
access layer of NGN. It mainly deals with the voice
transformation. FHX2000 Series Access Media
Gateway adopts softswitch standard protocol of
adaptation layer and transport layer to satisfy users’
access of integraed services such as voice, fax, data and
etc .

Feature
¾ Flexibly set access capacity with insert devices
¾ Broad interoperability with leading vendor’s platforms
¾ Protocol: H.248，MGCP，H.323，SIP，RTP/RTCP，T.30/T.38
¾ Voice codec: G.711a，G.711u，G.723，G.729a

Function
¾ Polarity reversal
¾ Call transfer, call waiting, IP Centrex、call back
¾ Analogue interface users accessing to IP network directly can complete compression
and decompression functions between users’ voice / fax and voice / fax over IP
network side
¾ Narrowband voice services access by accessing POTS users to realize voice, fax
services and etc under softswitch control.
¾ Supply billing functions. Real-time billing and history billing check with the 984 x
billing software or devices supported.
¾ Voice technology
¾ VAD( Voice Activity Detection), CNG(Comfort Noise Generation) ,EC(Echo
Cancellation), AGC(Automatic Gain Control), and Jitter Buffer

Application Architecture

11
12