Durco Plug Valve Dimensions PDF
Durco Plug Valve Dimensions PDF
Experience In Motion
Index
Page
G4 Sleeveline Valves....................................................... 3
G4 Seal System................................................................ 4
G4Z Fire Sealed................................................................ 5
G4B Marathon ................................................................. 6
TSG4 Severe Service........................................................ 8
G4 V-port Control Valves................................................. 10
Automated Systems......................................................... 11
Special Configuration Valves............................................ 12
Pressure /Temperature Ratings....................................... 13
Drawing G4 and G4B Straightaway Valve Dimensions.... 14
Flow Indication for 3-way valves...................................... 16
Drawing MG4 and MG4B 3-way Valve dimensions......... 17
Drawing TSG4 Sleeveline Valve dimensions.................... 18
PJG4 & PJG4B Jacketed Valve Dimensions..................... 19
Drawing FJG4 and FJG4B Jacketed Valve Dimensions.... 20
Drawing G4 and G4B Screwed end Valve Dimensions.... 21
Drawing G4 and G4B Weld end Dimensions.................... 22
Manual actuator and Trim Options ................................. 23
Parts and materials.......................................................... 25
How to Specify................................................................. 27
Selection, Installation, Operation TN 38501 before installing, operating or repairing any valve. The
purchasers/end user should train its employees and/or contrac-
and Maintenance
tors in the safe use of the Durco products in connection with the
Although Flowserve can, and often does, provide general guide- purchaser’s manufacturing processes.
lines, it is obviously not possible to provide application specific
data and warnings for all conceivable applications. The purchaser/ Design Changes
end user must therefore assume the ultimate responsibility for In order to follow the Flowserve commitment to continuous
the proper selection, installation, operation and maintenance of improvement, we reserve the right to change product and perfor-
the products. Read the appropriate IOM available from Cookeville, mance specifications without notice.
2
flowserve.com
PTFE Sleeve
Wide Materials Large seal area offers
Selection positive shutoff and
Corrosion resistant extended service life.
stainless steels, nickel
base and reactive
alloys.
All G4 Sleeveline valves offer the proven reliability of In-Line, Thru-Line Seal Adjustability
the plug/PTFE sleeve primary seal with a fluoropolymer
diaphragm secondary seal. In-line seal adjustment is achieved by turning two adjuster
fasteners to drive the plug deeper into the sleeve. This saves
maintenance and process time because the seal is adjusted
Positive Stem Seal in-line and under pressure within seconds. The result is
The unique fluoropolymer reverse lip diaphragm provides a repeatable, bubble-tight shutoff performance.
self-energizing dynamic stem seal where pressure activates
the reverse lip to seal against the stem. It also provides a
static seal by wedging against the stem with an interference
fit.
Line Sealing
The compressive, wedge fit of the tapered plug with the
PTFE sleeve serves as the sealing surface. The sleeve totally
surrounds plug ports and seals the circumference of the
plug, top and bottom. There are no cavities to accumulate
product. Sealing is both upstream and downstream.
• Seal is totally independent of line pressure.
• There is no metal-to-metal contact.
• Valve remains free-turning throughout its life and never
requires lubrication.
• Seal is adjustable.
• Wiping action between sleeve and plug provides for good
slurry handling.
4
flowserve.com
Packing (Grafoil)
Diaphragm (stainless
steel or Monel®)
Gasket (Grafoil)
Diaphragm
(fluoropolymer)
20
PPM
10
0 10 20 140 160
Cycles (x 1000)
Tertiary
Triple Sealed
Live-loaded PTFE packing set further
prevents potential emissions while
addressing possible permeation related
leakage.
Secondary
PFA reverse lip diaphragm
offers static and dynamic
self-adjusting stem sealing
assurance.
Belleville Washers
Accommodate extreme
temperature fluctuations.
Primary
PTFE sleeve provides
large static seal area
for positive shutoff and
extended service life.
Bonnet Taps
Options include bonnet tap leak-off
Drilled and Vented Plug connection for: insertion of process
Balances pressure between the compatible lubricants; use as inert gas
plug port and body cavity pad; or where remote monitoring of
highly critical processes is required.
8
flowserve.com
Wide Range of Stuffing Box Options with Independent Plug and Stem Seal Adjustments
The TSG4 offers broad flexibility in
choosing the packing set and design
options best suited to your service
requirements. Choose from a variety of
stem seals that lets you enjoy:
• Triple seal protection from fugitive
emissions Preformed PTFE cup and cone with lantern Preformed PTFE cup and cone with reverse
ring and reverse lip diaphragm lip diaphragm
• The sealing and long-term service
benefits of the PFA reverse lip
diaphragm
• Independent plug and stem sealing
adjustment
• Thermal cycling capability with live-
loaded fasteners using Belleville
washers with PTFE packing only Compression fire seal packing set die formed Compression fire seal packing set die formed
• Leak-off connections for continuous flexible graphite rings and lantern ring flexible graphite rings between braided
between braided Grafoil® with reverse lip Grafoil® with reverse lip diaphragm
monitoring
diaphragm
Plug Adjuster
Provides separate and positive, in-line plug/seat
adjustment for wear.
Packing Adjuster
Independent packing set adjustment prevents
stem seal emissions.
Packing and Top Cap Adjuster Fasteners
Live-loading of the packing adjuster and top
cap fasteners ensure integrity of stem and
bonnet despite fastener elongation due to
temperature swings.
Leak-Off Connection
Optional feature helps detect fugitive emissions
in the packing chamber.
9
Durco G4 V-Port Control Valves
In addition to the features and benefits that have made Characterized v-port Sleeveline control valves are available
Sleeveline the process industry’s premier plug valve, as follows:
Flowserve offers the G4 V-Port valve for precise modulating
• G4 – 1/2 in (15 mm) through 6 in (150 mm)
control services.
• G4B – 1/2 in (15 mm) through 6 in (150 mm)
Durco G4 V-Port control valves are available in a variety of
• TSG4 – 1 in (25 mm) through 3 in (75 mm)
trim configurations to satisfy your exact flow control needs.
Sizes include 1 in (25 mm) through 6 in (150 mm) with full
open C v values of 3.0 to 400.
90
80
70
% of Maximum CV
60
50
40
30
20
10
0
0 10 20 30 40 50 60 70 80 90 100
% of Valve Opening
G4 V-Port Cv Values
SIZE Cv Kv
1” 3.0 2.6
1” 4.0 3.4
1” 8.0 6.9
1” 30 26
1.5’ 31 27
2” 54 46
3” 121 104
4” 190 163
6” 400 344
10
flowserve.com
Automated Systems
11
Special Configuration Valves
Durco valves offer the process industries’ widest range of non-lubricated plug valve models, materials and configurations.
This provides customers the flexibility to specify Sleeveline valves to meet virtually all their applications needs.
12
flowserve.com
G4 Pressure/Temperature Ratings
Class 150 Valves Class 300 Valves
D-20 = Durimet 20 (CN-7M), CD4M = Durcomet 100 (CD-4MCu), D4 = Cast 316 SS (CF-8M), D4L = Cast 316L SS (CF-3M), D2 = Cast 304
SS (CF-8), D2L = Cast 304L SS (CF-3), DC2 = Chlorimet 2 (N-7M), DC3 = Chlorimet 3 (CW-6M), DINC = Cast Inconel (CY-40), DS = Cast
Carbon Steel (WCB), DCI = Ductile Cast Iron (60-40-18), DNI = Cast Nickel (CZ-100), DM-1 = Cast Monel (M-35-1), Zr-705C = Zirconium
705C, Zr-702C = Zirconium 702C, Ti = Titanium, CK-3MCuN = 254 SMO
13
G4 and G4B Straightaway Valve Dimensions
English Units
Stem Configuration
1/2 in (15 mm) thru 4 in (100 mm) 1/2 in (15 mm) to 6 in (150 mm) flats
G411 – Class 150
G431 – Class 300
1/2 in (15 mm) - 3 in (75 mm) Offset Wrench Standard
High Hub Wrench Optional
4 in (100 mm) and 6 in (150 mm) 8 in (200 mm) thru 14 in (350 mm) 8 in (200 mm) thru 18 in (450 mm)
G411H – Class 150 G431H – Class 300
Drilling
Valve A B E
Class 150 Class 300 C
Size
No. Size BC No. Size BC Class 150 Class 300 Class 150 Class 300 Class 150 Class 300
1⁄2 4 5⁄8 2 3⁄8 4 ⁄8
5
2 5⁄8 41⁄4 51⁄2 31⁄2 37⁄8 3 3⁄16 ⁄16
7
⁄16
9
Dimensions for Class 150 and 300 valves are the same except where indicated. Flanges are to ANSI B16.5 and can meet flange draft requirements.
W.O. is wrench operated. G.O. is gear operated.
*The top two holes on each flange on the 8 in (200 mm), 10 in (250 mm), 12 in (300 mm) and 14 in (350 mm) G411 valves are drilled for studs.
14 **Weight includes wrench or operator.
All dimensions are approximate and for illustration purposes only. For exact dimensions request certified dimensional prints. See page 23 for (L) dimensions.
flowserve.com
Dimensions for Class 150 and 300 valves are the same except where indicated. Flanges are to ANSI B16.5 and can meet flange draft requirements. W.O. is
wrench operated. G.O. is gear operated.
*The top two holes on each flange on the 8 in (200 mm), 10 in (250 mm), 12 in (300 mm) and 14 in (350 mm) G411 valves are drilled for studs.
**Weight includes wrench or operator.
All dimensions are approximate and for illustration purposes only. For exact dimensions request certified dimensional prints. See page 23 for (L) dimensions.
15
Flow Indication for MG4 and MG4B 3-Way Valves
Durco three-way valve body runs are marked with letter designa-
tions “A”, “B”, and “C”. A position indicator plate (marked with flow
designations AB, BC, AC, ABC, or CLOSED) is mounted on
the top-cap. The stop collar pointer indicates the flow arrangement.
The top of the plug is marked with a groove to further indicate the
port positions. Should the stop collar be removed, care should be
taken to assure proper orientation upon reassembly.
The valve wrench is designed to operate in any of four quadrants.
Arrangement 1
Arrangement 3 and 7
Arrangement 5 and 8
Arrangement 13
16
flowserve.com
English Units
A B D E
Valve Size C F M W
Class 150 Class 300 Class 150 Class 300 Class 150 Class 300 Class 150 Class 300
1⁄2 41⁄4 51⁄2 3 5⁄8 37⁄8 3 ⁄16
3
23⁄4 27⁄8 ⁄16
7
⁄16
9
13⁄8 4 25⁄32 6
3⁄4 4 5⁄8 6 4 43⁄4 3 3⁄16 3 3 7⁄16 ⁄8
5
111⁄16 4 25⁄32 6
1 5 61⁄2 41⁄4 47⁄8 3 23⁄32 31⁄2 33⁄4 ⁄16
7
⁄16
11
2 4 13⁄16 7
11⁄2 61⁄2 71⁄2 5 6 1⁄8 4 5⁄32 4 1⁄8 4 3⁄8 ⁄16
9
⁄16
13
27⁄8 51⁄2 9
2 7 81⁄2 6 61⁄2 43⁄4 41⁄2 43⁄4 5⁄8 ⁄8
7
3 5⁄8 6 5⁄16 12
3 8 111⁄2 71⁄2 81⁄4 6 5 1⁄8 5 9⁄16 3⁄4 11⁄8 5 71⁄2 18
4 9 12 9 10 721⁄32 6 63⁄4 15⁄16 11⁄4 6 3⁄16 18 3⁄8 30
6 101⁄2 15 7⁄8 11 121⁄2 — 71⁄2 81⁄2 1 17⁄16 81⁄2 — —
8 111⁄2 161⁄2 131⁄2 15 — 9 10 11⁄8 15⁄8 10 5⁄8 — —
10 13 18 16 171⁄2 — 121⁄4 121⁄4 13⁄16 17⁄8 123⁄4 — —
Metric Units
A B D E
Valve Size C F M W
Class 150 Class 300 Class 150 Class 300 Class 150 Class 300 Class 150 Class 300
15 108 140 92 98 81 76 76 11 14 32 121 152
20 117 152 102 121 81 76 76 11 16 43 121 152
25 127 165 108 124 94 89 95 11 17 51 122 178
40 165 190 127 156 106 105 111 14 21 73 140 229
50 178 216 152 165 121 114 121 16 22 92 160 305
80 203 283 190 210 152 130 141 19 29 127 190 457
100 229 305 229 254 194 152 171 24 32 157 229 762
150 267 403 289 318 — 190 216 25 37 216 — —
200 292 419 343 381 — 229 254 29 41 270 — —
250 330 457 406 444 — 311 311 30 48 324 — —
Dimensions of gears and gear mountings are the same as for straightway valves, with the exception of 8 in (200 mm), 180˚ 3-way valves. For stem dimen-
sions consult factory.
All dimensions are approximate and for illustration purposes only. For exact dimensions request certified dimensional prints.
17
TSG4 Sleeveline Valve Dimensions
English Units
1/2 in (15 mm) thru 3 in (75 mm)
G411 – Class 150
G431 – Class 300
1/2 in (15 mm) – 3 in (75 mm) Offset Wrench Standard
High Hub Wrench Optional
Stem Configuration
1/2 in (15 mm) to 6 in (150 mm) flats
Drilling A B E
Valve
Class 150 Class 300 C F G H
Size Class 150 Class 300 Class 150 Class 300 Class 150 Class 300
No. Size BC No. Size BC
1⁄2 4 5⁄8 2 3⁄8 4 5⁄8 2 5⁄8 41⁄4 51⁄2 31⁄2 37⁄8 6 11⁄32 ⁄16
7
⁄16
9
13⁄8 ⁄32
17
⁄16
7
3⁄4 4 ⁄8
5
23⁄4 4 3⁄4 31⁄4 4 5⁄8 6 37⁄8 43⁄4 6 11⁄32 ⁄16
7
⁄8
5
111⁄16 ⁄32
17
⁄16
7
1 4 ⁄8
5
3 1⁄8 4 3⁄4 31⁄2 5 61⁄2 41⁄4 47⁄8 6 15⁄16 ⁄16
7
⁄16
11
2 ⁄32
25
⁄32
21
11⁄2 4 ⁄8
5
37⁄8 4 7⁄8 41⁄2 61⁄2 71⁄2 5 6 1⁄8 71⁄4 9⁄16 ⁄16
13
27⁄8 ⁄32
25
⁄32
21
3 4 3⁄4 6 8 ⁄8
7
6 5⁄8 8 111⁄8 71⁄2 81⁄4 8 31⁄32 3⁄4 11⁄8 5 11⁄16 ⁄8
7
All dimensions are approximate and for illustration purposes only. For exact dimensions request certi-
fied dimensional prints.
*For remainder of valve dimensions, refer to straightway valve dimensions, page 12. The 4 in (100 mm)
and larger sizes are gear operated.
Stem Configuration 19
1/2 in (15 mm) to 6 in (150 mm) flats
FJG4 & FJG4B Jacketed Valve Dimensions
Fully Jacketed Valves*
1 in (25 mm) thru 6 in (150 mm)
FJG411 – Class 150
FJG431 – Class 300
All valves furnished with 1⁄16 in (2 mm) R.F. flanges to ASME (ASA) B 16.5 Std.
The jacket is designed for 150 psi saturated steam.
Jackets are same material as body.
* Gear operated–for additional dimensions call factory.
Stem Configuration
1/2 in (15 mm) to 6 in (150 mm) flats
English Units
Drilling A B
Nom.
Valve Size Class 150 Class 300 C D
Flange Size Class 150 Class 300 Class 150 Class 300
No. Size BC No. Size BC
1 2 4 3⁄4 43⁄4 8 3⁄4 5 7 75⁄8 6 61⁄2 3 23⁄32 23⁄4
11⁄2 21⁄2 4 3⁄4 51⁄2 8 ⁄8
7
5 7⁄8 71⁄2 81⁄4 7 71⁄2 4 5⁄32 3
2 3 4 3⁄4 6 8 ⁄8
7
6 5⁄8 8 8 7⁄8 71⁄2 81⁄4 43⁄4 31⁄2
3 4 8 3⁄4 71⁄2 8 ⁄8
7
77⁄8 9 93⁄4 9 10 6 41⁄4
4 6 8 ⁄8
7
91⁄2 12 7⁄8 10 5⁄8 101⁄2 111⁄2 11 121⁄2 721⁄32 5 3⁄16
6 8 8 ⁄8
7
113⁄4 12 1 13 111⁄2 12 5⁄8 131⁄2 15 * 6 7⁄16
Metric Units
Drilling A B
Nom. Flange
Valve Size Class 150 Class 300 C
Size Class 150 Class 300 Class 150 Class 300
No. Size BC No. Size BC
25 50 4 19 121 8 19 127 178 194 154 165 94
40 65 4 19 140 8 22 149 190 210 178 190 106
50 80 4 19 152 8 22 168 203 255 190 210 121
80 100 8 19 190 8 22 200 229 248 229 254 273
100 150 8 22 241 12 22 270 267 292 279 318 194
150 200 8 22 298 12 25 330 292 321 343 381 *
E Weight (kg)
Valve Size D F G H J M P W
Class 150 Class 300 Class 150 Class 300
25 70 14 22 92 20 17 22 122 33 178 12.6 21.6
40 76 16 25 105 20 17 24 140 35 229 18.4 30.2
50 89 17 29 127 27 22 25 160 35 305 22.5 32.0
80 108 19 32 157 27 22 30 190 44 457 37.8 59.0
100 132 24 37 216 43 36 40 229 50 762 78.8 131.0
150 164 27 41 270 48 36 40 * 64 * 135.9 196.7
20
flowserve.com
Metric Units
Area of Port
Valve Size A C D M W X Weight (kg)
(cm 2)
5 89 81 34 121 152 40 1.59 1.8
10 89 81 34 121 152 40 1.59 1.7
15 89 81 34 121 152 40 1.59 1.7
20 89 81 34 121 152 40 1.59 1.6
25 117 94 40 122 178 49 5.1 3.2
40 140 106 48 140 229 65 7.8 4.2
50 152 121 56 160 305 79 13.0 7.1
Metric Units
Wrench Sq.
Valve Size A C D M W X Weight (kg)
Dim.
5 89 81 44 11 121 152 40 2.2
10 89 81 44 11 121 152 40 2
15 89 81 44 14 121 152 40 2
20 89 81 44 14 121 152 40 1.9
25 117 69 60 14 122 178 49 4.7
40 140 106 73 14 140 229 65 7.9
50 152 121 86 22 160 305 79 10.1
All dimensions are approximate and for illustration purposes only. For exact dimensions request certi-
fied dimensional prints.
21
G4 & G4B Weld End Valve Dimensions
Socket Weld Valves English Units
3⁄4 31⁄2 3 3⁄16 111⁄32 1.07 4 25⁄32 1⁄2 6 19⁄16 .248 56 23⁄4
Welding of ductile iron is not recom- 1 4 5⁄8 3 23⁄32 119⁄32 1.33 4 13⁄16 1⁄2 7 115⁄16 .785 100 7
mended. 11⁄2 51⁄2 4 5⁄32 17⁄8 1.91 51⁄2 1⁄2 9 2 9⁄16 1.21 68 91⁄4
2 6 43⁄4 27⁄32 2.40 6 5⁄16 ⁄8
5
12 3 1⁄8 2.0 64 153⁄4
1/4 in (5 mm) thru 2 in (50 mm)
G434 Class 150 & 300
1/4 in (5 mm) - 3/4 in (20 mm) Metric Units
High Hub Wrench Standard Area
Valve Weight
A C D F M S W X of Port
Size (kg)
(cm 2)
5 89 81 34 – 121 – 152 40 1.597 0.9
10 89 81 34 – 121 – 152 40 1.597 0.9
15 89 81 34 22.0 121 10 152 40 1.597 0.9
20 89 81 34 27.0 121 13 152 40 1.59 1.2
25 117 94 40 33.8 122 13 178 49 5.1 3.2
40 140 106 48 48.5 140 13 229 65 7.8 4.2
50 152 121 56 61.0 160 16 305 79 13.0 7.1
Note: Not available in ductile cast iron. Valves provided in D20, DC2, DC3, and DM will be furnished
with stub ends pre-welded into valve.
Note: Not available in ductile cast iron. Valves provided in D20, DC2, DC3, and DM will be furnished
with stub ends pre-welded into valve.
All dimensions are approximate and for illustration purposes only. For exact dimensions request certi-
fied dimensional prints.
flowserve.com
Valve Size W
in (mm)
1 (25) 20 (500)
2 (50) 24 (600)
3 (80) 24 (600)
4 (100) 28 (700)
Bleed Valve
23
Chain Wheel
4 in (100 mm)
5 Sleeve PTFE*** 1
21 • 6 Diaphragm PFA or TM*** 1
11 Thrust Collar Durcomet 100 1
Thrust Collar/
11 • Durcomet 100/Hastelloy ® 1
Diaphragm
Stem Configuration 12 Adjuster Durcomet 100 1
1/2 in (15 mm) to
6 in (150 mm) flats B8-40 SS/B7 (CR-MO)
2• 12A Adjuster Fastener 2
Steel
13 Wrench Ductile Iron 1
17 Grounding Spring 304 SS 1
19 + Stop Collar Zinc Plated Carbon Steel 1
Stop Collar
19A 302 SS 1
Retainer
G4B 20 • Back-up Ring PTFE 2
Exclusive 21 • O-ring Viton (Kalrez optional) 2
Parts * Body (Item No. 1) and Plug (Item No. 2) available in the following cast
materials: Ductile Iron; Carbon Steel; CF-8 SS; Durcomet 100; Durimet 20;
Chlorimet 2 and 3; Nickel; Monel; Inconel; Titanium and Zirconium.
** Durcomet 100 is a high alloy stainless steel, CD4M Cu.
*** Other materials available on request.
• Parts exclusive to G4B.
+ locking stop collar is standard for valves ½ - 3”
15
G4Z 13
12
11
13
G4Z Fire Sealed 16
19A 17
19 Item Material of
Description 18
No. Construction
12A 7
ASTM A351 A744
12 1 Body
Gr. CF8M 5
3A ASTM A351A744 6
2 Plug
3 Gr. CF8M
17 ASTM A744 Gr. 4
3 Top Cap
11 CD4MCu
20 Top Cap B8M3 SS/B7
6A 3A
Fasteners (CR-MO) Steel 10
6
5 Sleeve PTFE
21
6 Diaphragm PFA or TM**** 14
6A Diaphragm Steel or Monel
Thrust ASTM A744 Gr. 9
11
2 Collar CD4MCu
19
ASTM A744 Gr.
12 Adjuster 20
CD4MCu
Adjuster
12A B7M
Fasteners
5 2
Grounding
17 302 S.S.
Spring
1 19 + Stop Collar Zinc Plated Steel
Stop Collar
19A 302 SS
Retainer
20 Packing Grafoil ®
21 Gasket Grafoil ®
G4Z-HF valves substitute B7M studs and
3
2M nuts for hex head to cap fasteners.
+ locking stop collar is standard for
valves ½ - 3"
**** Other materials available. 1
TSG4 Severe Service
Item Description Material of Item Description Material of
No. Construction No. Construction
1 Body ALY* 12 Plug Adjuster B7/B8
Fasteners
2 Plug ALY*
13 Stop Collar Zinc Plated
3• Sleeve TFE
Steel
4• Packing PTFE * Carbon Steel; 316SS; Durimet 20; Chlorimet 3;
14 Belleville Washers 17-7 PH
5 Packing Adjuster D100 E.N.C.*** Monel. Plug and Top Cap are typically the same
alloy unless otherwise specified.
6 Packing Gland 304SS 15 Stop Collar 302SS
** Part Nos. 4 & 20 are Grafoil® on Fire Sealed
7 Belleville Washers 17-7 PH Retainer TSG4Z.
E.N.C.***
16 • Grounding Spring 302 SS *** Part Nos. 7 & 14 are not normally used on
8 Adjuster Fasteners B7/B8 Fire Sealed TSG4Z. Optional Inconel 718 recom-
17 • Plug Gland 304 SS
26 9 Top Cap ALY* mended in corrosive environments.
18 • Thrust Washer Glass Filled
10 Top Cap Fasteners B7/B8 TFE • Recommended spare parts.
11 Plug Adjuster ASTMA 744 19 • Plug Bearing TFE
®
Grafoil is a registered trademark of Union
Carbide.
Gr. CD4MCu 20 • Gasket - Top Cap GY**
flowserve.com
How to Specify
Product Family
Pressure Class
Sleeve/seats
Manuf. Code
Example: 4-G4B-31C810D1M33Z
End Config.
Valve Size
Plug Style
Fasteners
Materials
4" Durco G4 Marathon plug valve, ASME Class 300,
Operator
Options
2-way, carbon steel body, 316 SS plug, CD4MCuN top
cap, Durlon sleeve, fasteners in B7, firesealed
– –
Valve size
0.25 Options
0.38 A Drilled & tapped flange
0.5 B Block & bleed w/ 1/4DG432 valve
0.75 C Chlorine service (DNZ)
1 K Kalrez o-rings
1.5 N NACE Trim
2 O Commercial Oxygen Cleaned
3 P Prepared for Phosgene
4 R Built Dry
5 S Silicone Free
6 V Vacuum service, 1 micron
8 W None
10 Z Fire sealed - STD
12 @ Dupont Fluoropolymer Material
14 Q Quality Plan (to appear as last option)
16 Adjuster fastener
18 1 B840
20 2 B9
Product Family 3 B7
2 WAY G4 4 B7MT
3 WAY MG4 5 C20
Marathon G4B 6 HC
HF Alkylation Valve G4HF 7 I718
Full Jacket G4 FJG4 9 B7M
Partial Jacket G4 PJG4 B B16
2 Way* G4N L L7
2 Way Acetic Acid G4AA M MKH
Pressure Class T B7T
150 1 G 1840
PN 10 2 Top Cap Fastener
300 3 1 B840
PN 16 4 2 B9
300x600 5 3 B7
600 6 4 B7MT
PN 25 7 5 C20
PN 40 8 6 HC
End Configuration 7 I718
Raised Face Flange 1 9 B7M
Screwed End 2 B B16
Butt Weld ** 3 M MKH
Socket Weld 4 T B7T
ButtweldXsocket weld 5 I I825
Flat Face Flange F Manufacturers code
Ring Type Joint R Body Alloy Plug Alloy Top Cap Alloy M Mfg CVO use only
Small Groove Flange S 0 CD4MCuN 0 CD4MCuN 0 CD4MCuN Operator
Large Groove Flange T 1 316 SS 1 316 SS D Ductile iron 0 Std Wrench
Plug Style 2 Alloy 20 2 Alloy 20 L 316L SS 1 Gear (CI)
2 Way C 3 Monel 3 Monel 5 DC2 3 Caustic PF (CI) with CI handwheel
3 Way Arr 1 D 4 Nickel 4 Nickel 6 DC3 7 Saginaw
3 Way Arr 3 E 5 Chlorimet 2 5 Chlorimet 2 7 Titanium 9 Bare Stem
6 Chlorimet 3 6 Chlorimet 3 A Adjustable T Wrench
3 Way Arr 5 F
7 Titanium 7 Titanium B Chain wheel operator
3 Way Arr 7 G
8 Carbon steel 8 Nickel-plated CS
3 Way Arr 8 H H HighHub
9 304L SS 9 304L SS
3 Way Arr 13 J V Oval HW
C DV C DV
Cv 4 1" K Sleeve/seats
D Ductile iron D Nickel-plated DI
Cv 8 1" L E ZRH E ZRH T PTFE
Cv 30 1" M G Zr 705 F Zr 702 D Durlon II
Cv 31 1.5" N H LCB G Zr 705 G Glass Filled
Cv 54 2" P J 304 SS H Nickel-plated LCB U UMPE sleeve w/ PFA diaphragm
Cv 12 3" Q L 316L SS J 304 SS A Solid PTFE 27
Cv 188 4" R N Inconel L 316L SS B Solid Durlon II
Cv 370 6" S U CE3MN N Inconel C Solid UMPE
Cv 3 1" U U CE3MN X TFE/no Zyglo
Cv 1 1" W * For 8" - 12" G4N is standard Z TM/no Zyglo
Cv 171 Z ** Pipe stubs required on Alloy 20, Chlorimet 3, CD4MCuN, Monel, CE3MN F UMPE Sleeve
United States
Flowserve Corporation
Flow Control Division
1978 Foreman Drive
Cookeville, Tennessee 38501
Phone: 931 432 4021
Fax: 931 432 3105
www.flowserve.com
Germany
Flowserve Ahaus GmbH
Von Braun Straße 19a
D-48683 Ahaus
Germany
Phone: +49 2561 686-0
Fax: +49 2561 686-39
Singapore
Flowserve Pte. Ltd.
12 Tuas Avenue 20
Republic of Singapore 638824
Phone: +65 6879 8900
Fax: +65 6862 4940
Brazil
Av. Tocantins 128
Sao Caetano do Sul
SP 09580-130
Brazil
FCD DVENBR0024-00 08/12 Printed in USA. Tel 55 11 2169 6300
Fax 55 11 2169 6313
To find your local Flowserve representative:
China
Flowserve Corporation Beijing Office
For more information about Flowserve Corporation, visit Room 22A1&A2.HanWei Plaza
www.flowserve.com or call USA 1 800 225 6989 No.7 GuangHua Road
Chaoyang District
Beijing. China 100004
Tel: +86-10-59210600
+86-10-59210601
Fax: +86-10-65611899
Flowserve Corporation has established industry leadership in the design and manufacture of its products. When properly selected, this Flowserve product is designed to perform its
intended function safely during its useful life. However, the purchaser or user of Flowserve products should be aware that Flowserve products might be used in numerous applications
under a wide variety of industrial service conditions. Although Flowserve can (and often does) provide general guidelines, it cannot provide specific data and warnings for all possible
applications. The purchaser/user must therefore assume the ultimate responsibility for the proper sizing and selection, installation, operation, and maintenance of Flowserve products.
The purchaser/user should read and understand the Installation Operation Maintenance (IOM) instructions included with the product, and train its employees and contractors in the safe
use of Flowserve products in connection with the specific application.
While the information and specifications contained in this literature are believed to be accurate, they are supplied for informative purposes only and should not be considered certified or
as a guarantee of satisfactory results by reliance thereon. Nothing contained herein is to be construed as a warranty or guarantee, express or implied, regarding any matter with respect
to this product. Because Flowserve is continually improving and upgrading its product design, the specifications, dimensions and information contained herein are subject to change
without notice. Should any question arise concerning these provisions, the purchaser/user should contact Flowserve Corporation at any one of its worldwide operations or offices.
© 2005 Flowserve Corporation, Irving, Texas, USA. Flowserve is a registered trademark of Flowserve Corporation.
flowserve.com