Instructions for Use

Washing machine

Downloaded from www.Manualslib.com manuals search engine

 Thank you for your confidence in purchasing our washing machine, and congratulations on the
excellent choice.
Your new washing machine meets the requirements of modern treatment of laundry. It is rational in
the consumption of energy, water and washing agents.
Our appliances are friendly to the environment. Some of the materials may be recycled, others
deposited or decomposed. To avoid pollution of environment, once your appliance is no longer
useful, take it to your local authorized waste appliance dealer.

The appliance is intended exclusively for use in households. If the appliance is used for
professional purposes, for profit, or for purposes beyond regular use in a household, or if appliance
is used by a person who is not a consumer, the warranty period equals the shortest warranty period
possible as stipulated by the relevant legislation.

Description of washing machine .................................. 3

Cautions .......................................................................... 4
Installation and connection ........................................... 5
Operation......................................................................... 8
Tips for washing and energy saving .......................... 16
Cleaning and maintenance .......................................... 17
Troubleshooting ........................................................... 20
296800

Tables ............................................................................ 24
2
Downloaded from www.Manualslib.com manuals search engine
 Description of washing machine

1. Front panel 5. Adjustable legs

2. Detergent dispenser 6. Water outlet hose
3. Door 7. Water inlet hose
4. Filter lid 8. Mains power cable

Technical information Dimensions (w x d x h): 600 mm x 600 mm x 850 mm

(depending on model) Depth with door open: 106 cm
Weight (net): 78 kg
Nominal voltage: 230 V, 50 Hz
Power: 2300 W
Max. load: 8 kg / 7 kg
Power socket: (230 V, 50 Hz, 10 A)
Water pressure: min. 0,05 MPa, maks. 0,8 MPa
Fuse: 10 A
296800

3
Downloaded from www.Manualslib.com manuals search engine
 Cautions
• Be sure to remove transport brackets prior first use of the appliance. Attempted operation of the
blocked machine may result in irreparable damage which is not covered by the manufacturer’s
warranty!
• When connecting your washing machine to water supply, be sure to use brand new water inlet
hose and appropriate sealing gaskets (attached).
• Do not locate the machine in a room with temperature below 0°C. Parts of the machine may be
damaged if frozen.
• Install the washing machine in a perfectly horizontal position, on solid flat concrete floor.
• Follow the instructions for correct installation and water and mains connections.
• Never immerse the end of the drain hose into the draining water.
• Prior starting the washing cycle lock the door by pressing them at the designed spot.
• Door may not be open during the washing cycle.
• We recommend running the self-cleaning program before the first wash in order to remove any
impurities from the washing machine drum (See chapter on” Selecting additional functions”).
• Use only detergents and softeners for machine wash. Manufacturer may not assume
responsibility for any damage and eventual discoloring of gaskets and plastic components as a
consequence of incorrect use of bleach and/or coloring agents.
• For removal of lime residues use such agents with added anti-corrosion agents. Follow the
manufacturer’s instructions. Finish the lime removal by multiple rinsing to remove completely
eventual acid residues.
• Never use detergents containing solvents, since there is a danger of creating toxic gasses which
may damage the machine and result in ignition or explosion.
• Upon completion of washing operation close the water faucet.
• Before any transport block the machine by inserting at least one transport blocking rod. Prior this
operation disconnect the appliance from the mains power!
• Rating plate with basic information is located above the opening of the machine.
• The warranty shall not apply to consumables (bulbs), minor discoloration or deviations of color,
increased noise level as a consequence of appliance age, which does not affect appliance
functionality, and aesthetical deficiencies which do not affect appliance functionality or safety.
• The appliance is manufactured in compliance with all relevant safety standards; however, it is
recommended that persons with impaired physical, motional, or mental abilities, or persons with
inadequate experience and knowledge, do not use the appliance without due supervision. The
same recommendation applies to minors using the appliance.

Before connecting the appliance read these instructions carefully. Repairing the failure
arising from inappropriate connections or use of the appliance is not covered by the
guarantee.
The symbol on the product or on its packaging indicates that this product may not
be treated as household waste. Instead it shall be handed over to the applicable
collection point for the recycling of electrical and electronic equipment. By
ensuring this product is disposed of correctly, you will help prevent potential
negative consequences for the environment and human health, which could
otherwise be caused by inappropriate waste handling of this product. For more
detailed information about recycling of this product, please contact your local city
office, your household waste disposal service or the shop where you purchased the
product.
296800

4
Downloaded from www.Manualslib.com manuals search engine
 Installation and connection
Package removal In removing the wrapping be careful not to damage the
appliance with a sharp object.
Before connecting the appliance, let it warm up to room
temperature (wait for two hours).

• Our appliances are packed in environmentally friendly

materials which may be recycled, deposited or decomposed
without any threat to the environment.
• To this end all wrappings are marked accordingly.

Removal of transport • Move the pipes.

brackets • Loosen screws (A) at the rear of the machine (Fig. 1).
• Remove the brackets (B) (Fig. 1) and slide them into the
groove on the blocking rod (Fig. 2) - the right one should be
turned around.
• Use the brackets to rotate blocking rods for 90° and pull them
out.
• Close the openings with attached plastic pegs.
Save transport brackets for eventual later use.

Fig. 1 Fig. 2

Be sure to remove the transport brackets prior first

use, otherwise the appliance may be permanently
damaged. In such cases the warranty conditions are
void.

Leveling the appliance • Put the appliance in horizontal position by turning the
adjustable legs. The legs are adjustable up to +/- 1 cm.
After the adjustment tighten the nuts firmly (A) - towards
the bottom of the machine!

Vibrations, moving of the appliance and loud operation

due to incorrect setting of the adjustable feet shall not
be covered by this warranty.
The appliance should be placed on a surface with
concrete base; the surface should be dry and clean in
order to prevent slipping. The adjustable feet should
also be cleaned before installation.
296800

5
Downloaded from www.Manualslib.com manuals search engine
 • If you have a tumble dryer of the same dimensions, you can
place it on top of the washing machine.

Water inlet connection To ensure correct operation of the appliance, water

pressure inlet must be between 0,05 and 0,8 MPa.
Minimum water pressure can be established by
measuring the quantity of poured out water. 3 litres of
water must be poured out from completely opened tap
in 15 seconds.
• Take the water inlet hose from the drum and attach the inlet
hose angle extension (1) to the washing machine by screwing
it onto the provided thread (certain models only).
• Insert the gasket with a filter net into the straight inlet hose
attachment nut (2) and screw the nut onto the water tap. (With
some models, the gasket with filter net is already fitted and
any additional fitting into the nut on the straight attachment is
not required).
• In case of hot and cold water connection, connect one hose to
cold and other to hot water faucet as marked at the rear of the
appliance (letters C and H) (C - cold; H - hot)

The inlet hose should be tightened manually, firmly

enough to prevent any leaks. After tightening the hose,
check for any leaks.
Use of pliers, wrenches, or other similar tools is not
allowed when installing the hose, as these tools can
damage the nut thread.

Partial Aqua-stop (water stop system)

In case of damage on the interior pipe, leaking is prevented by
automatic closing system which stops water inlet to the machine.
In such cases display A turns red.
Inlet pipe must be replaced.

Complete Aqua-stop (certain models only)

In case of damage on the interior pipe, leaking is prevented by
automatic closing system which stops water inlet to the machine.
Security system also detects whether there is any water leakage
within the interior of the machine. In such cases washing is
suspended, machine switches on the pump and signals error.
296800

6
Downloaded from www.Manualslib.com manuals search engine
 Do not immerse the Aqua-stop system inlet pipe into
the water, because it contains the electric valve!

Water outlet connection • Fix the outlet hose to run into the sink or the bathtub, or
connect it directly to the wall drain outlet (diameter min. 4 cm).
• Wall drain must be installed properly and must enable
occasional cleaning.
• Fasten the outlet hose support with a piece of rope led through
the hose elbow, to prevent the hose from slipping to the floor.
The end of outlet hose should be placed between minimum 60
cm and maximum 100 cm above the floor level.

Connect the appliance to • Plug the mains power cable to the wall mains socket.
the mains supply • Required voltage and other information are written on the
rating plate above the door opening of the machine.

The wall socket must be accessible at all times and

must be equipped with an earth lead (in accordance
with the local safety regulations).
The permanent connection must be fitted by an
authorized personnel only.
Damaged mains power cable may be replaced only by
the producer or his authorized personnel.
Never plug the appliance into the electric shaver socket
or hair dryer socket.

296800

7
Downloaded from www.Manualslib.com manuals search engine
 Operation

A - program selector knob Signal LED’s:

B - delayed start - washing program stages
C - setting the spinning speed (rpm) / stop • wash
pump
D - quick program or cold wash (depending • rinse
on the model) • spin
E - higher water level - Child lock
F - START / PAUSE button
G - display

Program selector Basic programs Partial programs

Cotton
+ Pre-wash
Heavy duty
Softening
Easy iron
Quick program
15° Tap Water+
Synthetics
Pumping water
+ Pre-wash
Delicate Spinning

Wool

Manual wash

Mix
296800

8
Downloaded from www.Manualslib.com manuals search engine
 Washing procedure • Open the door of the machine.
• Load the laundry into the drum.
• Close the door.
• Open the water inlet faucet.
• Push the ON/OFF button and select the program.
• Add washing and treatment agents (detergent and softener).
• Start the operation by pushing the START knob (F).

- Open the door of the machine.

Door is opened by pulling the handle (lever) on the right hand
side of the door towards you.
- Sort the laundry by the type of fabrics.

Do the buttons and zippers, tie the strings and pull out
the pockets.
Very delicate laundry should be put in a special
protective sack.
It is suggested to load the drum with items of different
sizes.
Pay attention to the labels on the clothes, indicating
the recommending washing mode (see table of
textile treatment symbols on the last page of these
instructions).

- Load the laundry into the drum.

Check that the drum is empty.
- Close the door of the appliance.
- Open the water inlet faucet.
- Push the ON/OFF button and select washing program.

Washing machine Program is selected by turning the program selector (A) from the
operation “0” position to the desired washing program. The ON/OFF signal
LED indicating particular washing stage for the chosen program
starts flashing. The program selector (A) may be turned in both
directions, and the appropriate program selected according to the
type of laundry washed and the required washing temperature
(see Program Chart for help). You may select basic or partial
programs.
Select additional functions by pressing their relevant knobs (F).

- Selection of basic programs ( , , , , , )

Basic programs represent integral programs containing all
washing stages, including softening and spinning (see Program
Chart). They are selected by turning the program selector (A) to
the appropriate position.
296800

9
Downloaded from www.Manualslib.com manuals search engine
 Cotton: whites/colored
Normally stained cotton and flax bed linen and underwear, table
cloth, bathroom towels, top garments, etc.
For heavily stained permanent press use the heavy duty
program, or program with the pre-wash .
For smaller loads (non-delicate cotton, linen, synthetic, and
mixed fabric) and smaller quantities of soiled laundry (laundry
refreshment, laundry wet with perspiration, etc.), we recommend
the use of the quick program. This way, you will save both
energy and time.
If you wish the laundry not to be excessively creased at the end
of washing, use easy ironing program .
The Cotton 15° program is intended for washing less soiled
laundry, using detergents (washing gels) specially designed for
washing at such temperatures.
Using this program will save you both time and power as water
heater will only be engaged if the water inlet temperature is lower
than 15°C.

Synthetics
Normally stained shirts, blouses and other polyester and
polyamide garments, or a mixture of these fabrics with cotton.
For heavily stained permanent press use program with
pre-wash .

Delicate
This is a program for delicate fabrics (dresses, skirts, blouses)
and curtains.

Wool
Especially gentle program for washing wool and garments made
from mixture of other fabrics with wool, appropriately marked for
machine washing.

Manual wash
Very gentle program concluded with short gentle spin (max. 400
RPM).
It is suitable for washing fabrics from flax, silk, wool or viscose,
marked accordingly for manual wash.

Mix
Special program for washing normally stained colored laundry made
from various resistant fabrics at 30°C.
296800

10
Downloaded from www.Manualslib.com manuals search engine
 - Selection of additional function ( , , , , , , )
Additional functions alter the basic washing cycle procedure.
Particular function is switched on by pressing the relevant knob.
The selection is confirmed with sound signal and switching on the
signal LED above the selected function. If certain function is not
available for the selected program, signal LED will not illuminate.
The function is switched off by pressing the same button again
- signal LED goes off.

Select the particular function after the selection of the

basic program, but prior pressing the START button (F).

Display (G)
After setting the basic and partial programs and pressing the
START (F) button, washing time is indicated on the display. After
the end of washing, the display reads END.
During washing, the remaining washing time is indicated in hours
and minutes.
If no program is selected and started and no other action is taken
within five minutes after turning on the machine, the display will
be automatically turned off to save energy.
The display will turn on again when you rotate the program
selector dial or press any button.
If no action is taken after the end of the program, the display will
also turn off after five minutes.

Low water temperature, low network voltage, and

smaller loads of laundry may extend the washing time;
the time indicated on the display is constantly adjusted
to account for such conditions.

Delayed start
Press the (B) button; the time “00:00” will be indicated on the
display (G). Each time the button is pressed again, the time on
the display will be increased by one hour (maximum delay is 23
hours). After the time has been selected, the LED over the button
lights up (and remains lit). If no other button is pressed in the
following 5 seconds, program duration is indicated on the display.
The function is activated when the START (F) button is pressed.
Time is decreased by minutes. When the count-down is over, the
washing program starts automatically.
• To interrupt or change the delayed start setting, press the
START / PAUSE button.
• To change the delay time, select a new time by pressing the
(B) button. Press START to resume the count-down. To quickly
interrupt the delayed start, press the (B) button and hold it
for three seconds. Press the START button to resume the
296800

program.

11
Downloaded from www.Manualslib.com manuals search engine
 Spinning speed (rpm) / Pump stop
By pressing the (C) button, you can decrease the spinning speed
(in rounds per minute) to “0”. After pressing the button for the
first time, the optimum rpm setting for the selected program is
indicated. By each subsequent press on the button, the spinning
speed is decreased. The last selection is “pump stop”, which
means that laundry remains soaked in the last rinsing water. Use
this function to prevent creasing when you are not able to take
the laundry out of the washing machine immediately after the
washing cycle is over. This function is particularly appropriate for
synthetics and delicate laundry . Use of this function is not
recommended with wool and manual washing .

Quick program (selection with a button (D))

• energy-saving program
• appropriate for washing lightly soiled laundry or smaller
quantities of clothes
• reduces washing and rinsing time
• reduces water consumption (with some programs)
• by pressing the key quick program on the program Cotton
30°C, activate the program Cotton 30°C-quick .

Cold wash (only available with some models)

For washing lightly soiled or color-sensitive laundry.
When this function is activated, the heaters in the washing
machine are turned off, and the washing program is shortened.

Higher water level (selection with a button (E))

• Improves rinsing, which is particularly important if your skin is
oversensitive to detergents.
• For washing heavily soiled laundry.

Auto-clean program (SterilTub)

Run this program to eliminate any impurities, bacteria, and odor
from the washing machine.
Before running the auto-clean (SterilTub) program, empty the
washing machine drum; there shouldn’t be any clothes in the
washing machine during the auto-clean (SterilTub) program.
Adding a small amount of powder detergent will additionally
improve the effect of the auto-clean (SterilTub) program.
To run the auto-clean (SterilTub) program, rotate the program
selector knob (A) to the position “Cotton 95°C”, then pressing the
(E) (Higher water level) key and hold it for three seconds.
“Cln” and the time remaining until the end of the program will
alternate on the display.
If you do not regularly use washing program with temperatures
over 60°C, it is recommended to run the auto-clean program at
296800

least once per month.

12
Downloaded from www.Manualslib.com manuals search engine
 - Selection of partial programs ( , , )
These are independent programs and may be used when you do
not need the entire washing program. In case you would like to
use more additional programs in a sequence, you must turn off
the appliance prior any new program selection (turn the program
selector to “0” for at least one second).

Conditioning
The program is intended for softening, starching, or impregnating
clean clothes.
Softening program can also be used as an independent or
additional rinse program; in this case, however, do not add any
fabric softener or conditioner.
The program is completed by a spinning cycle at 1,000 rpm.
Spinning speed can be decreased.

Pumping the water out

Use it when the washing program was interrupted or if pump stop
function was engaged, and you only wish to pump the water out
of the drum, without spinning.

Spinning
Aggressive spinning for non-delicate laundry at high spin RMP.
You may engage the reduced spin RPM knob.

- Adding washing and softening agents

(see Tips for washing and energy saving)
• pre-wash compartment
• main wash compartment
• softener compartment
If you do not apply the program which includes the pre-wash
feature, you may add washing detergent directly into the drum,
using the measuring vessel.

When adding softener, be careful to fill the dispenser

only up to the marked level.
Be sure to close the detergent dispenser when
opening/closing the appliance door.
296800

13
Downloaded from www.Manualslib.com manuals search engine
 Start the operation • Push the START button (F). Sound signal confirms the start,
the LED indicating particular washing stages stops flashing.
The machine starts operating after a few seconds. If the door
is not properly closed after starting the operation, the washing
stage indicator LED starts flashing again after a few seconds.
When you close the door, the machine initiates the selected
program.
• As each washing stage is completed the relevant washing
stage indicator LED goes off and the subsequent one goes on.
• In case you would like to alter the washing program after the
initiated washing operation, turn the program selector for one
second to the position “0”, followed by the selection of a new
program. Switching the machine off deletes any previously
selected additional functions(i.e. Pump stop), so they have to
be reactivated.

Upon switching OFF, all additional pre-selected

functions are deleted; therefore they must be switched-
ON again.

- End of washing program

The end of washing program is signalized by flashing washing
progress LEDs. The message “End” is indicated on the display.
• A sound is emitted, indicating that washing machine door can
be opened.
• Take the laundry out of the drum and remove any remaining
particles or foreign bodies from the door seal.
• Leave the door ajar to let the machine dry.
• Close the water inlet tap.
• Turn off the washing machine by rotating the program selector
knob (A) to position “0”.
• After the end of washing program, power supply should be
turned off by pulling the mains cord plug out of the outlet.

Interruptions • By the user

Selecting PUMP STOP function

The program stops when it reaches the PUMP STOP position
(if this additional function was previously selected); (washing
machine door is closed throughout the washing process). The
LED over the button (C) starts to flash. Washing can be resumed
by pressing the START (F) button.
If the setting pump stop was selected, the program stops
at the last rinsing cycle and the symbol for pump stop is
indicated on the display. The program can be completed by
pressing the START (F) button; in this case, the program will
296800

finish with a spinning cycle, as defined by the program.

14
Downloaded from www.Manualslib.com manuals search engine
 The program can also be changed by rotating the program
selector knob to “0” and choosing either spinning or only
pumping out the water between additional programs or cycles.

Manual cancellation
The program is cancelled if the program selector knob (A) is
rotated to position “0”. If there is water in the machine, select one
of the additional programs (pumping , spinning ) to empty
the drum and complete the program.
PAUSE knob
By pressing the PAUSE knob (F) program may be suspended
at any time. After certain time you may open the door if there is
no water in the drum, otherwise this is not possible. Program is
continued by pressing the START knob (F).

• Failures
Program is suspended in case a failure occurs. Signal LED’s
are flashing and sound signal is heard (see cf. Failures).

• Power failure
At electric cutout the program is interrupted, however, after the
power supply has been re-established, the program operation
automatically proceeds.

If a power failure occurs when the drum is still full of

water, be careful not to open the door before you pump
the water out.

Special functions • Child lock

- To activate the child lock, simultaneously press the spinning

speed setting button (C) and short program (or cold
wash ) button (D) and hold them for at least three seconds.
If the child lock is successfully activated, a sound is emitted
and a signal LED lights up. Follow the same procedure to
deactivate the lock.
- As long as the Child lock function is engaged you may not alter
the program or additional functions. You may merely switch off
the machine by turning the program selector (A) to the position
“0”. Child lock remains active even after the appliance is
switched off, and you have to disengage it if you want to select
a new washing program.

• Setting the sound signal

The appliance enables setting a louder sound signal, as well
as turning the sound signal off. Set the function before the
296800

basic program is selected. Set the function by simultaneously

15
Downloaded from www.Manualslib.com manuals search engine
 pressing the button (D) and rotating the program selector knob
(A) from position “0” to the first position for washing program
(clockwise). (“S1”) is indicated on the display, denoting preset
normal sound signal loudness. By pressing the button (D), the
loudness in increased (“S2”); press the button again to turn
the sound signal off (“S0”). The selected setting is stored and
remains in memory even if washing machine is turned off.

Tips for washing and energy saving

• Before washing sort out the laundry according to the type, degree of dirtiness and color
resistance.
• Prior selecting the washing program consult the sewn tab with information on a particular piece
of laundry (see Maintenance Chart on the last page).
• Wash separately the new colored textile products for the first time.
• Wash heavily soiled laundry in small quantities and add more detergent.
• Treat stubborn stains with special stain remover, it will save energy.
• With lightly stained laundry select washing program without pre-wash, use short program and
select lower washing temperature. This way you may save up to 50% of energy.
• Avoid washing too little quantities of laundry because of energy saving and for better
performances of the appliance.
• The largest allowed quantity of dry laundry is indicated in the Program chart.
• Before washing empty the pockets, close zip fasteners, and remove any metal fasteners or
badges that might clog the drain or damage the laundry or drum interior.
• Loosen the stacked laundry prior inserting it into the drum.
• Use only detergents for machine wash.
• Add powder or liquid detergents according to the manufacturer’s instructions.
• If water hardness level exceeds 14°dH degrees, the use of water conditioner is required. Any
damage to the heater due to failure to use a water conditioning agent shall not be covered by
this warranty.
• Chlorine-based whitening agents are not recommended, as it can damage the heater.

Hardness Degree of hardness

scale °dH(°N) m mol/l °fH(°F) p.p.m.
1 - Soft < 8,4 < 1,5 < 15 < 150
2 - Medium 8,4 - 14 1,5 - 2,5 15 - 25 150 - 250
3 - Hard > 14 > 2,5 > 25 > 250
In case of hard water add detergent according to the Chart for
degree 1 and add appropriate quantity of water softener (see
manufacturer’s instructions).
296800

16
Downloaded from www.Manualslib.com manuals search engine
 • If you do not apply the program which includes the pre-wash
feature, you may add washing detergent directly into the drum.
• If you use thick liquid softener it is recommended to dilute
it with water, to prevent clogging of dispenser compartment
ducts.
• Washing machine is equipped with the dispenser partition
gate, so you may pour liquid detergent also into the central
compartment (depending on model). If you use powder
detergent the gate is lifted up, and in case of liquid detergent it
is slid down.
• Liquid detergents are intended for main wash only, without
pre-wash.
• Insert particularly delicate linen (stockings, delicate female
underwear, etc.) into the special bag.
• High spin RPM leave less moisture in laundry which dries out
much quicker in the tumble dryer, thereby saving energy.

Do not put clods of detergent into the soap dispenser

as the tube in the washing machine may clog.

Cleaning and maintenance

Disconnect the washing machine from the mains

before cleaning!

• The casing should be cleaned with soft cloth and mild

detergent.
• The interior of the drum and the door gasket is cleaned by
washing at 60°C without laundry and adding half quantity of
detergent.
• Frequent, or predominant, washing at low temperatures, using
liquid detergents, may result in development of bacteria which
causes odor in the washing machine.
To prevent this, we recommend running the auto-clean
(SterilTub) program occasionally (see chapter “OPERATION /
selecting additional functions”).
• If necessary, clean the detergent dispenser. Pull it out from its
casing completely by pressing the flap (see Fig.).
296800

17
Downloaded from www.Manualslib.com manuals search engine
 • If necessary, clean the cover of the bung under the running
water.

• Wash it under running water using a brush, and dry it. Remove
any leftover dried detergent from the bottom of the casing.

• Clean the entire rinsing area of the washing machine with a

brush, especially the nozzles on the upper side of the rinsing
chamber.

• Clean frequently the water inlet hose screen under running

water.

• After each wash wipe the door rubber gasket. This will prolong
its useful life.
296800

18
Downloaded from www.Manualslib.com manuals search engine
 • Open the filter lid using flat screwdriver or similar tool.

• Filter needs occasional cleaning, especially following heavily

shaggy or old laundry. Before cleaning, drain any water from
the machine via drain pipe.

• Turn it anti-clockwise, pull it out and clean under running

water.

• Insert the filter back as shown on the picture, and tighten by

turning it in clockwise direction. To ensure good sealing the
gasket surface (A) must be dirt free.

296800

19
Downloaded from www.Manualslib.com manuals search engine
 Troubleshooting
Washing machine controls the operation of particular functions during washing. If irregularities
are detected, the fault is signaled by displaying a message (Fx) on the display, and by rhythmical
flashing of the LEDs. Simultaneously with the flashing of the LEDs, a sound signal is emitted
several times, in the same rhythm. The machine signals the fault as soon as it is detected, and
the program progress is paused. If the fault is in the heating system, the machine completes the
washing program, but without the heating function.

If the fault is signaled during washing machine operation, the error code and remaining washing
time are indicated alternately on the display.
The fault is indicated until the washing machine is turned off.

Failures:
2 - Two flashes: door is not correctly closed
3 - Three flashes: inappropriate water intake
7 - Seven flashes: inappropriate water outlet.
In these cases, you will be able to remedy the failure by yourself (See Troubleshooting table).

1 - One flash: temperature sensor failure

4 - Four flashes: spinning sensor failure
5 - Five flashes: motor failure
6 - Six flashes: Heater failure
Should any of these failures occur, make note of the failure code, turn off the appliance and repeat
the program. If the failure persists, contact the nearest authorized service centre (the LEDs will
continue to flash until the appliance is turned off).

Various interferences from the environment (e.g. electric devices) may also cause the machine to
signal faults. In such case:
- turn off the appliance and wait a few seconds;
- turn on the appliance and repeat the washing program.
If the fault reoccurs, call the service center.

The warranty does not cover faults caused by interference from the environment (lightning strike,
electric circuit, natural disasters, etc.).
296800

20
Downloaded from www.Manualslib.com manuals search engine
 Failure Possible cause Remedy
The machine does not Machine is not powered. Check if:
work (indicator LED’s are • power in the socket,
not illuminated). • the fuse is OK,
• plug is in the socket.
FAILURE 2
Washing program does Door is not properly closed. Push it towards the machine.
not start
• At the beginning of the
washing program: on/off
LED is flashing
• During washing: LEDs
periodically flash twice
FAILURE 3
Water does not enter the Disturbed water inlet. Check if:
machine (after approx. • the water tap is open,
4 min the machine • inlet pipe net filter is clean.
reports failure F3 - LEDs Push the START button.
periodically flash three
times).
Water is leaking from the Filter is not tightly screwed in. Tighten the filter properly.
machine. Inlet pipe is not tightly screwed Tighten the inlet pipe.
to the machine or to the water
faucet.
Outlet pipe fell to the floor. Affix the outlet pipe to the drain.
The machine moves The machine is not properly Level the machine with the
during operation. leveled. adjustable legs.
Transport brackets are not Remove transport brackets.
removed.
The machine vibrates Unevenly distributed laundry, This is normal, the machine will
during the spin. especially with very small reduce the RPM if vibrations are too
quantities (for ex. only the strong.
bathrobe). Wash larger quantity of laundry.
Excessive foaming during Excessive measure of Use washing powder according to
washing. detergent. the instructions by the producer and
according to the water hardness
and soiled laundry.
Use only detergents for machine
washing.
FAILURE 7
Water is poorly pumped Water outlet is clogged Check if:
out or not at all (machine • the filter is clean,
reports failure F7 - the • outlet pipe is not jammed,
LEDs periodically flash • the drain is clogged,
seven times). • outlet pipe is positioned higher
than 1m.
Push START again
Laundry is not properly The machine switched on the The machine operates normally.
spun. UKS* function. Because of bad Wash large and small pieces of
No failure is reported. laundry balance, the machine laundry together.
has automatically reduced spin
RPM.
296800

21
Downloaded from www.Manualslib.com manuals search engine
 Failure Possible cause Remedy
Greasy wads appear on Too little detergent (laundry was Wash the laundry again.
the laundry. very greasy). Add more detergent for such soiled
laundry, or use liquid detergent.
Laundry is stained after You used liquid detergent or Use the detergent containing
washing. detergent for colored laundry whitener.
which does not contain whitener.
White powdery residues It is not the consequence of bad Immediately rinse the laundry once
on the laundry. rinsing, but because of neo- again.
phosphate detergents containing • Use liquid detergents which do not
non soluble components contain zeolites.
(zeolites) for water softening. • Try removing the residues with the
Such substances may be brush.
deposited upon the laundry.
Detergent residues in the Low water flow pressure. • Clean the inlet pipe filter net.
dispenser. Some detergents may stick to • In case of low water pressure
the dispenser rather hard if it increase water level.
is wet. • Wipe the dispenser prior loading
detergent.
Softener is not completely Sucking cover is not correctly Clean the dispenser and firmly fix
rinsed, or water is left in positioned or is clogged. the cover to its place.
the dispenser dish.
Unpleasant smell in the • Remains of fabrics, washing • Check whether the filter is clean.
washing machine drum. agent and softener in the filter.
• Development of germs • Run the auto-clean (SterilTub)
program (see chapter: selecting
additional functions)
Washing time is longer • Low temperature of inlet water. • Washing program time may be up
than usual. • The machine switched on to 60% longer; however, this does
Time indicated on the the UKS* system because of not imply a fault in the machine.
display is corrected during uneven laundry load.
the washing cycle. • Low mains voltage.
• There has been a failure in the • Washing time is extended by the
power supply. power supply down-time.
FAILURE 1
Program temperature not Temperature sensor • Turn off the appliance and wait for
reached (the machine disconnected from the electronic a few seconds;
reports a failure F1 - the circuit. • turn the appliance back on and
LEDs periodically flash repeat the washing program.
once) If the failure is reported again, call a
service technician.
FAILURE 4
Spinning rpm not reached • rpm sensor disconnected • Turn off the appliance and wait for
in the selected program • Motor overload due to too high a few seconds;
(the machine reports water level (manual addition of • turn the appliance back on and
a failure F4 - the LEDs water) or too big laundry load repeat the washing program.
periodically flash four • Motor failure If the failure is reported again, call a
times) service technician.
296800

22
Downloaded from www.Manualslib.com manuals search engine
 Failure Possible cause Remedy
FAILURE 5
Motor operation Motor overload or motor failure. • Turn off the appliance and wait for
interrupted; or motor does a few seconds;
not operate (the machine • turn the appliance back on and
reports a failure F5 - the repeat the washing program.
LEDs periodically flash If the failure is reported again, call a
five times) service technician.
FAILURE 6
Program temperature not • Heater failure • Turn off the appliance and wait for
reached (the machine • Inlet water too cold a few seconds;
reports a failure F6 - the • Manual addition of water • turn the appliance back on and
LEDs periodically flash six repeat the washing program.
times) If the failure is reported again, call a
service technician.

* UKS: universal stability control - this function prevents excessive vibrations during spinning.

In case you were not successful in repairing the malfunctions in

spite of the above suggestion chart, call the nearest authorized
service shop.
Repairing the failure arising from inappropriate connections or
use of the appliance is not covered by the guarantee, and the
repair expenses are paid by the customer.

296800

23
Downloaded from www.Manualslib.com manuals search engine
 Tables
Program chart - 8 kg

Water cons.
Basic programs (L)
RPM

Max. load (kg)

Energy cons.
1000 - 1400
Spin (RPM)
Temp. (°C)

(kWh)
Cotton 8 95 75 2,45
Cotton 8 60 69 1,36
1400
Cotton + prewash 8 60 79 1,65
Cotton - heavy * 8 60 69 1,38
Cotton - easy ironing 4 60 1000 69 1,27
Cotton 8 40 69 0,75
1400
Cotton 8 30 69 0,39
Cotton - quick 17’ 2 30 1000 40 0,17
Cotton - Tap Water+ 8 15 1400 69 0,18
Synthetics 3,5 60 46 0,97
Synthetics + prewash 3,5 60 1000 54 1,30
Synthetics 3,5 40 43 0,56
Delicate 3 40 58 0,48
700
Delicate 3 30 58 0,39
Wool 2 30 800 42 0,20
Manual wash 1,5 30 800 50 0,25
Mix 3 30 1000 43 0,35
Partial programs
Softening 3,5 1000 15 0,02
Pumping water 8 -
Spinning 8 1400 - 0,03

* Testing program by EN 60456 with the selection of max. spin

RPM.
296800

24
Downloaded from www.Manualslib.com manuals search engine
 Program chart - 7 kg

Water cons.
Basic programs (L)
RPM

Max. load (kg)

Energy cons.
Spin (RPM)
Temp. (°C)

800 - 1600

(kWh)
Cotton 7 95 62 2,19
Cotton 7 60 56 1,17
1600
Cotton + prewash 7 60 66 1,32
Cotton - heavy * 7 60 56 1,19
Cotton - easy ironing 3,5 60 1000 56 1,14
Cotton 7 40 1600 56 0,67
Cotton 7 30 56 0,35
Cotton - quick 17’ 2 30 1000 40 0,17
Cotton - Tap Water+ 7 15 1600 56 0,18
Synthetics 3,5 60 46 0,97
Synthetics + prewash 3,5 60 1000 54 1,30
Synthetics 3,5 40 43 0,56
Delicate 3 40 58 0,48
700
Delicate 3 30 58 0,39
Wool 2 30 800 42 0,20
Manual wash 1,5 30 800 50 0,25
Mix 3,5 30 1000 43 0,35
Partial programs
Softening 3,5 1000 18 0,02
Pumping water 7 - 0,001
Spinning 7 1600 0,03

* Testing program by EN 60456 with the selection of max. spin

RPM.
296800

25
Downloaded from www.Manualslib.com manuals search engine
 Program chart /
Additional functions

/
Program

Spinning speed (rpm)

/
Higher water level

Quick program
Cold wash*

Pump stop
Basic programs

Cotton z z/z z/z

Cotton with prewash z z/z

Cotton heavy z z/z

Cotton z z/z z/z

Cotton - quick 17’ z z/z

Synthetics with pre-wash z z/z

Synthetics z z/z z/z

Delicate z z/z z/z

Wool z z/z z/z

Manual wash z z/z z/z

Mix z z/z z/z

Partial programs
Rinse z

Softening z

Pumping water
Spinning z

z possibility

* depending on model.
296800

26
Downloaded from www.Manualslib.com manuals search engine
 Maintenance chart

Normal wash
Max. Max. Max.
Max.
washing washing washing
washing
temp. temp. temp. Washing
temp. 95°C Manual
60°C 40°C 30°C not
Delicate wash washing
allowed

Whitening Whitening in cold water

Whitening not allowed

Ironing Hot iron max. Hot iron max. Hot iron max. Ironing not
200°C 150°C 110°C allowed

Dry cleaning Dry cleaning in all Perchlorin- Dry cleaning in Dry cleaning not
solvents etyhlene kerosene, in pure allowed
R11, R113, alcohol and in
Kerosene R 113

High
temperature
Drying Place on Hang wet Hang Tumble drying
flat surface Low not allowed
temperature

296800

We reserve the rights to make any changes or mistakes in these operation

instructions.

27
Downloaded from www.Manualslib.com manuals search engine
 PS PG2 LED 8/7kg 296800/en (12-10)

Downloaded from www.Manualslib.com manuals search engine