Base Shear Calculations (Calculo Del Corte Basal)

Note :
SEISMIC ANALYSIS IN X DIR Values in Red color should be entered by the

Values in Green Should not be edited
Check the comments in Blue before further de
Node and corresponding reactions can be co
NODE REACTION(T)
1 2225.7
2 0
3 0
4 0
5 0
6 0
7 0
8 0
9 0
10 0
11 0
12 0
13 0
14 0
15 0
16 0
17 0
18 0
19 0
20 0
21 0
22 0
23 0
24 0
25 0
26 0
27 0
0
TOTAL 2225.7 T
or should be entered by the User
hould not be edited
nts in Blue before further design
onding reactions can be copied and pasted from STAAD Analysis
TOTAL SLABS = 13
LOAD ON COLUMNS = 2226 x 1 = 28934.10 T
SHEAR WALL LOAD

SELF WT = 0.1 Water tank 0
LOAD ON SWALL = 0.1 lift machine 0
LMR & etc = 0 0.00 T
0.20 T
2 SHEAR WALLS = 0.40 T
TOTAL LOAD SLABS all slabs = 0.40 + 28934.10 + 0.00

= 28934.50 T
Load Details
Load per floor = 28934.5
Area of one floor = 617 mm2 Soil type 2
Intensity of loading = 3.607 T/m2
( factored )
Live load = 0.2 T/m2
Dead Load = 2.2049 T/m2
Fos = 1.5
Weight of top roof = 0.00 T
Building Dimensions
L= 26.00 m
B= 33.00 m
H= 38.35 m
n= 13 (no of storeys including GF)
h= 3.00 m (height of each floor)
H(top) = 63.00m ( Total height including top floor )
Seismic Coefficients
Z= 0.1
I= 1.0
R= 3.0
I / R = 0.333333
Ta = 0.09 x H = 0.677
d
Sa / g = 2.009
Rock & hard 1
Medium 2
Soft soils 3
Table - 2 ( Zone Factor Z)
II III IV V
Intensity Low Moderate severe Very severe
Z 0.1 0.16 0.24 0.36
Sa / g =
for rock & hard 1+ 15 T for 0.00<= T <=0.1

2.5 for 0.10<= T <=0.4
1.0 / T for 0.4<= T <=4.0
CAT - 1 CAT - 2 CAT - 3
1 1 1
for medium 1+ 15 T for 0.00<= T <=0.1 -1 -1 0 Rock and hard
2.5 for 0.10<= T <=0.55
1.36 / T for 0.55<= T <=4.0 1 1 1
-1 -1 0 medium
for soft soils 1+ 15 T for 0.00<= T <=0.1

2.5 for 0.10<= T <=0.67 1 1 1
1.67 / T for 0.67<= T <=4.0 -1 -1 0 soft soil
Ta = 0.677
rock & hard for medium soft soils
0 0 0
0 0 0
1.477 2.009 2.467
0 2.009 0
Rock and hard
medium
soft soil
Calculation of Floor Load
Area of one floor = 617 mm2

Intensity of loading = 3.607343 T/m2
Working load = 3.607343
=2.40 T/m2
1.5
Live load = 0.2 T/m2
Dead Load = 2.204895 T/m2
0.25 % of LL = 0.20 x 0.25 x 617.0 = 30.85 T

DL = 617.00 x 2.20 = 1360.42 T
Total = 1392.00 T / floor
Weight of top roof = 0.00 T
Calculation of Base Shear
L = 26.00 m
B = 33.00 m
H = 38.35 m
n= 13 (no of storeys including GF)
h= 3.00 m (height of each floor)
H(top) = 63.00m
Ta = 0.09 x H = 0.677
d
Design Horizontal seismic coefficients
Z= 0.1
I= 1.0
R= 3.0
I / R = 0.333333
Sa / g = 2.0092
Ah = Z I Sa 0.1 x1.0x2.009
0.0335
2Rg 2 x 3.0
Design Base shear
Seismic weight of building ( W )= 13x 1392.00 + 0.00
= 18096.000 T
Vb = Ah x W = 18096.00 x 0.0335 = 606.000 T

Qi = Vb x WiHi2
WiHi2
Floor Wi ( T ) Hi ( M ) WiHi2 x 103 Qi ( T )

12 1392 63 5524.848 80.715
11 1392 60 5011.200 73.211
10 1392 57 4522.608 66.072
9 1392 54 4059.072 59.301
8 1392 51 3620.592 52.895
7 1392 48 3207.168 46.855
6 1392 45 2818.800 41.181
5 1392 42 2455.488 35.873
4 1392 39 2117.232 30.931
3 1392 36 1804.032 26.356
2 1392 33 1515.888 22.146
1 1392 30 1252.800 18.303
0 1392 27 1014.768 14.825
-1 1392 24 801.792 11.714
-2 1392 21 613.872 8.968
-3 1392 18 451.008 6.589
-4 1392 15 313.200 4.576
-5 1392 12 200.448 2.928
-6 1392 9 112.752 1.647
-7 1392 6 50.112 0.732
-8 1392 3 12.528 0.183
-9 1392 0 0.000 0.000
Total = 41480.208 606.000

Values in Green Should not be edited
63 606 41480.21
3 606 41480.21
3 606 41480.21
3 606 41480.21
3 606 41480.21
3 606 41480.21
3 606 41480.21
3 606 41480.21
3 606 41480.21
3 606 41480.21
3 606 41480.21
3 606 41480.21
3 606 41480.21
3 606 41480.21
3 606 41480.21
3 606 41480.21
3 606 41480.21
3 606 41480.21
3 606 41480.21
3 606 41480.21
3 606 41480.21
3 606 41480.21
3 606 41480.21
3 606 41480.21
3 606 41480.21
3 606 41480.21
3 606 41480.21
3 606 41480.21
3 606 41480.21
CROSS CHECK FOR FX AND Sa/g
Fx (T) from STAAD

4.56 0.882 14.994 0.819
2.632 2.944 2.313 2.261
5.332 0.859 0.676 1.306
5.378 0.846 0.678 2.216
2.88 2.71 2.717 2.17
2.622 3.68 2.75 1.176
2.622 0.856 0.635 0.892
2.879 0.836 0.637 3.702
5.465 2.886 2.913 2.764
5.43 18.809 0.65 1.249
2.642 5.761 1.48 0.764
4.76 5.712 0.774 0.81
1.651 17.668 0.641 205.405
1.531 0.85 0.869 183.637
3.082 4.512 0.925 98.075
2.621 3.254 0.921 98.618
3.072 3.272 0.846
1.519 4.684 3.068
1.633 0.891 0.906
3.904 0.884 0.848
1.537 4.53 2.98
1.527 3.113 0.899
3.776 3.065 0.826
1.375 4.191 1.634
1.448 0.776 1.406
1.434 15.45 0.894
1.298 4.848 0.78
0.985 4.823
2.135
2.102
83.832 123.592 49.66 605.864 863 T
Fx = 863 T
Fx 863
0.029826
Fy 28934.5
% RATIO 2.982599
OK
Sa / g 2.009175

Base Shear Calculations (Calculo Del Corte Basal)

Uploaded by

Copyright:

Available Formats

Base Shear Calculations (Calculo Del Corte Basal)

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Base Shear Calculations (Calculo Del Corte Basal)

Uploaded by

Copyright:

Available Formats

Note :

SEISMIC ANALYSIS IN X DIR Values in Red color should be entered by the

LOAD ON COLUMNS = 2226 x 1 = 28934.10 T

SHEAR WALL LOAD

TOTAL LOAD SLABS all slabs = 0.40 + 28934.10 + 0.00

Table - 2 ( Zone Factor Z)

Z 0.1 0.16 0.24 0.36

for rock & hard 1+ 15 T for 0.00<= T <=0.1

for soft soils 1+ 15 T for 0.00<= T <=0.1

Area of one floor = 617 mm2

0.25 % of LL = 0.20 x 0.25 x 617.0 = 30.85 T

Calculation of Base Shear

Design Horizontal seismic coefficients

Design Base shear

Seismic weight of building ( W )= 13x 1392.00 + 0.00

Vb = Ah x W = 18096.00 x 0.0335 = 606.000 T

Floor Wi ( T ) Hi ( M ) WiHi2 x 103 Qi ( T )

Total = 41480.208 606.000

Fx (T) from STAAD

83.832 123.592 49.66 605.864 863 T

You might also like