8533 Series

Applications Description
Engine area/sensors in harsh environ- • Screw coupling
ments, railways (brake system), for all • Interchangeable and intermateable with
purposes in severe climatical environ- MIL-C 83723 Series III T type
ment and high temperature.
• Plug with self locking system
• High temperature connector
• High level shock and vibration
Standards • Thermocouple contacts available except
NFL 54143 - EN 2997 hermetic connectors.

Characteristics
Mechanical Electrical Climatic
• Shell : aluminum alloy (class R-W-A) • Dielectric withstanding • Working temperature :
stainless steel (class K, E, Y and YE) - 65°C to 175°C (class W)
• Plating : nickel (class R) Altitude Service - 65°C to 200°C (class R, A, K and Y)
olive green cadmium (class W) At ground 1500 Vrms - 65°C to 260°C cyclic (class E and YE)
black anodized (class A) 15 000 m 600 Vrms • Leakage : low pressure immersion -
passivated (class K, E, Y and YE) 21 000 m 400 Vrms L54001 and interfacial sealing :
• Insulator : thermoset 33 000 m 200 Vrms pressure 2kPa
• Grommet and seal : silicone elastomer • Hermeticity : differential pressure of 1 bar
• Contact : copper alloy • Contact resistance : as per NFL 54143 and (air helium) leakage is ≤ 0,36 mm3/hr
ferrous alloy (class Y and YE) EN 2997 • Damp heat : as per NFL 54143
• Plating : gold over nickel • Insulation resistance : and EN 2997
• Mechanical endurance : 10 cycles of 24 hours
> 5000 MΩ at 500 Vdc
250 operations (class R and W) • Salt spray : 48 hours
• Max current rating per contact :
(class R-K-E-Y and YE)
500 operations (class K, E, Y and YE) size 20 : 7.5 A size 20 : 05 A
• Shock : 300 g during 3 ms
• Vibration : random 5 Hz to 2000 Hz -
size 16 : 13,0 A size 16 : 10 A
size 12 : 23,0 A size 12 : 17 A
}
class Y
and YE
500 hours (class W)
• Fire resistance : as per NFL 54143 and
EN 2997 (class K and E)
1 G2/Hz (2x8 hours) • Electrical continuity :
• Contact retention : - 5 mΩ with RFI shielded Resistance to fluids
size 20 : 090 N - 60 mΩ without RFI shielded MIL-H 5606 - SKYDROL 500 B4 - LD4
size 16 : 111 N • Shielding : to 100 MHz at 1 GHz JP5 - MIL-L 7870 A - MIL-L 23699
size 12 : 133 N attenuation > 65 dB MIL-L 7808 - MIL-C 25769 - MIL-A 8243

Ordering information
Environmental connectors

basic series 8533 -0 R S 14 - 15 P N •

shell type 0 - square flange receptacle
7 - jam nut receptacle
3 - plug with self locking and RFI shielding
4 - plug with self locking
class W - 175°C (aluminum version with olive green cadmium plating)
R - 200°C (aluminum version with nickel plating)
A - 200°C (aluminum version with black anodized plating)
K - 200°C (stainless steel version)
E - 260°C (stainless steel version)
S - with 360° teeth
shell size - 08-10-12-14-16-18-20-22-24-26-28
contact layouts - see table p 135
contact type P - male S - female
polarization - N-6-7-8-9-Y - see p 136
specification
without specification - connector supplied with standard contacts
08 - connector supplied with large barrel contacts
L - connector supplied without contacts

131
 8533 Series
Backshells
aluminum version
basic series 852 - 31 N 14
backshell type 31 - backnut
52 - straight cable clamp
51 - elbow cable clamp
plating N - nickel
A - black anodized
W - olive green cadmium
shell size - 08-10-12-14-16-18-20-22-24

Backshells
stainless steel version
basic series 8527- 01 14 •
backshell type 01 - backnut
02 - straight cable clamp
shell size - 08-10-12-14-16-18-20-22-24
specification A - obligatory suffix for backshell type 02 only
NOTE : for others types and sizes backshells - See catalogue M 85049

Hermetic connectors
basic series 8533 -1 Y 10 - 05 P N
shell type 1 - solder fixing receptacle
2 - square flange receptacle
7 - jam nut receptacle
class Y - 200°
YE - 260°
shell size - 08-10-12-14-16-18-20*-22-24*
contact layouts see table p 135
contact type P - male only
polarization see table p 136

* Consult us

Protective caps
aluminum version

basic series 83723- 21 R 14

cap type 21 - cap for receptacle
22 - cap for plug
plating R - nickel
W - olive green cadmium
A - black anodized
shell size - 08-10-12-14-16-18-20-22

132
8533 Series
Cross reference list
EN 2997 AEROSPATIALE ROLLS ROYCE Description
FCI Souriau NFL 54143 (1)

852-31 •• - ASN-E0455-01 •• N - Backnut

Aluminum
version
852-52N •• - ASN-E0455-02 •• N - Straight cable clamp

852-51N •• - ASN-E0455-03 •• N - Elbow cable clamp

Stainless

version
8527-01 •• - ASN-E0199-01 •• K - Backnut

steel
8527-02 •• A - ASN-E0199-02 •• K - Straight cable clamp

8526-1348 EN 3155-018 M 2020 - - Standard size 20

8526-1349 EN 3155-018 M 1616 NSA 938 151 PA 1600 - Standard size 16

8526-1350 EN 3155-018 M 1212 NSA 938 151 PA 1200 - Standard size 12

Male
8522-2349A EN 3155-018 M 2018 NSA 938 151 PA 2000 - Large barrel size 20

8522-6179A EN 3155-018 M 1614 NSA 938 151 PA 1601 - Large barrel size 16

Class 175° C and 200° C

8526-4175 EN 3155-018 M 1618 NSA 938 151 PA 1602 - Small barrel size 16

8526-5041 EN 3155-018 M 1218 NSA 938 151 PA 1202 - Small barrel size 12

8526-1344 EN 3155-019 F 2020 - - Standard size 20

8526-1346 EN 3155-019 F 1616 NSA 938 152 SA 1600 - Standard size 16

8526-1347 EN 3155-019 F 1212 NSA 938 152 SA 1200 - Standard size 12

Female
8520-292 EN 3155-019 F 2018 NSA 938 152 SA 2000 - Large barrel size 20

8522-6180A EN 3155-019 F 1614 NSA 938 152 SA 1601 - Large barrel size 16

8526-4176 EN 3155-019 F 1618 NSA 938 152 SA 1602 - Small barrel size 16

8526-5591 EN 3155-019 F 1218 NSA 938 152 SA 1202 - Small barrel size 12
Contact

8533-1000 EN 3155-004 M 2020 - ESC30 P20 BC Standard size 20

8533-1004 EN 3155-004 M 1616 ASN-E 0445 FW 1600 ESC30 P16 BC Standard size 16

8533-1002 EN 3155-004 M 2018 ASN-E 0445 FW 2001 - Large barrel size 20

Male

8533-1006 EN 3155-004 M 1614 ASN-E 0445 FW 1601 - Large barrel size 16

8533-1008 EN 3155-004 M 1618 ASN-E 0445 FW 1602 - Small barrel size 16

8533-1035 EN 3155-004 M 1212 ASN-E 0445 FW 1200 ESC30 P12 BC Small barrel size 1
Class 260° C

8533-1019 EN 3155-044 M 2022 - - Double crimping size 20

8533-1001 EN 3155-005 F 2020 - ESC30 S20 BC Standard size 20

8533-1005 EN 3155-005 F 1616 ASN-E 0446 DW 1600 ESC30 S16 BC Standard size 16

8533-1003 EN 3155-005 F 2018 ASN-E 0446 DW 2001 - Large barrel size 20

Female

8533-1007 EN 3155-005 F 1614 ASN-E 0446 DW 1601 - Large barrel size 16

8533-1009 EN 3155-005 F 1618 ASN-E 0446 DW 1602 - Small barrel size 16

8533-1036 EN 3155-005 F 1212 ASN-E 0446 DW 1200 ESC30 S12 BC Standard size 12

8533-1018 EN 3155-045 F 2022 - - Double crimping size 20

133
 8533 Series
Cross reference list
FCI Souriau EN 2997 AEROSPATIALE BOEING BOEING ROLLS ROYCE Description
NFL 54143 (1) BACC 63 CN/CM BACC 63 BR/BT(2)
P■
8533-0RS ••-•• S 08(3) - P■
ASN-E0454RS ••-•• S - - - Square flange receptacle
P■
8533-0WS ••-•• S 08(3) - - - - -
P■
8533-0RS ••-•• S EN2997-RS0 ••-•• M ■ - - - -
F
P
8533-0WS ••-•• S ■ EN2997-WS0 ••-•• M ■ - - - -
F
P■
8533-0RS ••-•• S L A
EN2997-RS0 ••-•• B ■ P■A
ASN-E0454RS ••-•• S - - -
P■
8533-0WS ••-•• S L A
EN2997-WS0 ••-•• B ■ - - - -

P■
8533-3RS ••-•• S 08(3) - P ■
ASN-E0452RS ••-•• S - - - Plug with self locking

Aluminum version
P■
8533-3WS ••-•• S 08 (3)
- - - - - and RFI shielded
P■ EN2997-RS6 ••-•• M
8533-3RS ••-•• S F ■ - - - -
P■
8533-3WS ••-•• S A■
EN2997-WS6 ••-•• B - - - -
P
8533-3RS ••-•• S ■ L A■
EN2997-RS6 ••-•• B P■A
ASN-E0452RS ••-•• S - - -
P■
8533-3WS ••-•• S L A
EN2997-WS6 ••-•• B ■ - - - -

Class 175° C and 200° C

P■
8533-4RS ••-•• S 08(3) - P ■
ASN-E0451R ••-•• S - - - plug with self locking
P■
8533-4WS ••-•• S 08 (3
- - - - -
P■
8533-4RS ••-•• S EN2997-R6 ••-•• M ■ - - - -
F
P■
8533-4WS ••-•• S EN2997-W6 ••-•• M ■ - - - -
F
P■
8533-4RS ••-•• S L A
EN2997-R6 ••-•• B ■ P ■A
ASN-E0451R ••-•• S - - -
P
8533-4WS ••-•• S ■ L A
EN2997-W6 ••-•• B ■ - - - -

P ■ 08(3
8533-0KS ••-•• S - - - - - square flange receptacle
P■ EN2997-S0 ••-•• M
8533-0KS ••-•• S F ■ - - - -
P■ L
8533-0KS ••-•• S A ■
EN2997-S0 ••-•• B - - - -

P ■ 08(3
8533-3KS ••-•• S - - - - - plug with self locking
P
8533-3KS ••-•• S ■ EN2997-S6 ••-•• M
F ■ - - - - and RFI shielded
P■ L
8533-3KS ••-•• S A ■
EN2997-S6 ••-•• B - - - -

P ■ 08(3)
8533-4KS ••-•• S - - - - - plug with self locking
P■ EN2997-K6 ••-•• M
8533-4KS ••-•• S F ■ - - - -
P■ L
8533-4KS ••-•• S A ■
EN2997-K6 ••-•• B - - - -
Stainless steel version

8533-1Y ••-•• P ■ EN2997-Y1 ••-•• M ■ - - - - solder fixing receptacle

8533-2Y ••-•• P ■ EN2997-Y0 ••-•• M ■ - - - - square flange hermetic receptacle
8533-7Y ••-•• P ■ EN2997-Y7 ••-•• M ■ - - - - jam nut hermetic receptacle

P ■ 08(3
8533-0ES ••-•• S - P ■
ASN-E0444SE ••-•• S - - - square flange receptacle
P■ EN2997-SE0 ••-•• M P ■A P ■A
8533-0ES ••-•• S F ■ - BACC63CN••-•• S BACC63BT ••B•• S -
P■ L
8533-0ES ••-•• S A ■
EN2997-SE0 ••-•• B P P
ASN-E0444SE ••-•• S ■ A BACC63CN••-•• S ■ P
BACC63BT ••B•• S ■ P
ESC10KE0 ••-•• S ■

P ■ 08(3)
8533-3ES ••-•• S - P ■
ASN-E0442SE ••-•• S - - - plug with self locking
P
8533-3ES ••-•• S ■ EN2997-SE6 ••-•• M P ■A P ■A
F ■ - BACC63CM••-•• S BACC63BR ••B•• S - and RFI shielded
Class 260° C

P
8533-3ES ••-•• S ■ L A ■
EN2997-SE6 ••-•• B P P
ASN-E0442SE••-•• S ■ A BACC63CM••-•• S ■ P ■
BACC63BR ••B•• S P ■
ESC10SE6 ••-•• S

P ■ 08(3)
8533-4ES ••-•• S - P ■
ASN-E0441KE••-•• S - - - plug with self locking
P■ EN2997-KE6 ••-•• M
8533-4ES ••-•• S F ■ - - - -
P
8533-4ES ••-•• S ■ L A
EN2997-KE6 ••-•• B ■ P ■A
ASN-E0441KE••-•• S - - P ■
ESC10KE6 ••-•• S

8533-KE5 •• EN2997-KE5 •• - - - - dummy receptacle

8533-1YE ••-•• P ■ EN2997-YE1 ••-•• M ■ - - - ESC10YE1 ••-•• P ■ solder fixing receptacle

8533-2YE ••-•• P ■ EN2997-YE0 ••-•• M ■ - - - ESC10YE2 ••-•• P ■ square flange hermetic receptacle
8533-7YE ••-•• P ■ EN2997-YE7 ••-•• M ■ - - - - jam nut hermetic receptacle

(1) : Part numbers in specification NLF 54143. Replace EN 2997 by 3.

(2) : Superseded by BACC 63 CN/CM
134 (3) : 08 for #20 contacts layouts
8533 Series
Contact layouts
viewed from front face of male insulator ▲ class 200°C ■ class 260°C ●hermetic
▲■● ▲■

08

08-03 3#20 08-98 3#20

▲■● ▲■●

10

10-05 5#20 10-06 6#20

▲■● ▲■●

12

12-03 3#16 12-12 12#20

▲■● ▲■● ▲■●

14

14-04 4#12 14-07 7#16 14-15 15#20

▲■ ▲■● ▲
1

5
2
16
3 4 4 Coax 50 Ω
16-10 10#16 16-24 24#20 SN393 1#16
▲■ ▲■● ▲■

18

18-14 14#16 18-31 31#20 18-08 8#12

▲■ ▲■ ▲■

20

37#20
20-39 2#16 20-41 41#20 20-16 16#16
▲■ ▲■ ▲■●

22

22-12 12#12 22-19 19#16 22-55 55#20

▲■ ▲■

24

24-61 61#20 24-30 30#16

▲■

28
Consult us - Special product.

For other contacts layout please consult us.

28-42 42#16
135
 8533 Series
Polarization
alternative shell key and insert positions (MIL STD 1554)
positions shell 08 shell 10 shell 12 shell 14 shell 16 shell 18
key e°insert a° b° c° d° a° b° c° d° a° b° c° d° a° b° c° d° a° b° c° d° a° b° c° d°
N 0 105 140 215 265 105 140 215 265 105 140 215 265 105 140 215 265 105 140 215 265 105 140 215 265
6 0 102 132 248 320 102 132 248 320 18 149 192 259 18 149 192 259 18 149 192 259 18 149 192 259
7 0 80 118 230 312 80 118 230 312 92 152 222 342 92 152 222 342 92 152 222 342 92 152 222 342
8 0 35 140 205 275 35 140 205 275 84 152 204 334 84 152 204 334 84 152 204 334 84 152 204 334
9 0 24 135 199 240 24 135 199 240 24 135 199 240
Y 0 98 152 268 338 98 152 268 338

alternative shell key and insert positions (MIL STD 1554) view of front face of plug
positions shell 20 shell 22 shell 24 shell 28
key e°insert a° b° c° d° a° b° c° d° a° b° c° d° a° b° c° d°
N 0 105 140 215 265 105 140 215 265 105 140 215 265 105 140 215 265
6 0 18 149 192 259 18 149 192 259 18 149 192 259 18 149 192 259
7 0 92 152 222 342 92 152 222 342 92 152 222 342 92 152 222 342
8 0 84 152 204 334
9 0 24 135 199 240
Y 0 98 152 268 338

Crimp contacts
contact part numbers admissible wire section external ø over insulator
size type male contact female contact code by colour bands AWG mm2 min. Max.
class 175°C and 200°C

standard 8526-1348 8526-1344 red - red 24-20 0.21-0.60 0.85 2.10

20 large barrel 8522-2349A 8520-292 red - violet 22-18 0.38-0.93 0.85 2.10

standard 8526-1349 8526-1346 blue - blue 20-16 0.60-1.34 1.20 2.70

16 large barrel 8522-6179A 8522-6180A blue - orange 18-14 0.93-1.91 1.20 2.70
small barrel 8526-4175 8526-4176 blue - orange 22-18 0.38-0.93 1.20 2.70

standard 8526-1350 8526-1347 yellow - yellow 14-12 1.91-3.18 1.90 4.01

12 small barrel 8526-5041 8526-5591 yellow - violet 22-18 0.38-0.93 1.90 4.01

standard 8533-1000 8533-1001 red - red + 1 white dot 24-20 0.25-0.60 0.85 2.10
20 small barrel 8533-1002 8533-1003 red - violet + 1 white dot 22-18 0.38-0.93 0.85 2.10
class 260°C

20 double crimping 8533-1019 8533-1018 red - green + 1 white dot 22 0.4 - 1.25

standard 8533-1004 8533-1005 blue - blue + 1 white dot 20-16 0.60-1.34 1.20 2.70
16 large barrel 8533-1006 8533-1007 blue - orange + 1 white dot 18-14 0.93-1.91 1.20 2.70
small barrel 8533-1008 8533-1009 blue - violet + 1 white dot 22-18 0.38-0.93 1.20 2.70

12 standard 8533-1035 8533-1036 yellow - yellow + 1 white dot 14-12 1.91-3.18 1.90 4.01

Thermocouple contacts
type male contact female contact admissible wire section external ø over insulator
contact
C : chromel part code by colour part code by colour AWG mm 2
min. Max.
size A : alumel numbers bands numbers bands
C 8522-875A brown-orange-green 8522-877A brown-yel.-brown
standard 24-20 0.21-0.60 0.85 2.10
A 8522-876A brown-orange-yel. 8522-878A brown-yel.-black
class 175°C and 200°C

20
C 8522-3761 yellow 2 dots 8522-3770 yellow 2 dots
large barrel 22-18 0.38-0.93 0.85 2.10
A 8522-3760 black 2 dots 8522-3771 black 2 dots

C 8522-881 yellow 1 dot 8522-883 yellow 1 dot

16 standard 20-16 0.60-1.34 1.20 2.70
A 8522-882 black 1 dot 8522-884 black 1 dot

C 8522-887 yellow 1 dot 8522-889 yellow 1 dot

12 standard 14-12 1.91-3.18 1.90 4.01
A 8522-888 black 1 dot 8522-890 black 1 dot

136
8533 Series
Dimensions
Plug type 3 classes WS - RS - KS - ES and type 4 classes WS - AS - KS - ES with backshells
Aluminum backshells

Backnut 31
Ø for flange

Straight
cable clamp
52

shell 08 10 12 14 16 18 20 22 24 28
size
A Max 21.30 24.90 29.60 31.25 34.42 37.34 41.91 44.07 47.24 52.00
Elbow .839 .980 1.165 1.230 1.355 1.470 1.650 1.735 1.860 2.047
cable clamp B 1/2”-20 5/8”-24 3/4”-20 7/8”-20 1”-20 1-1/16”-18 1-3/16”-18 1-5/16”-18 1-7/16”-18 1-3/4”-18
51 Thread UNEF UNEF UNEF UNEF UNEF UNEF UNEF UNEF UNEF UNEF
2A 2A 2A 2A 2A 2A 2A 2A 2A 2A
C Max 34.50 34.50 34.50 34.50 34.50 34.50 34.50 34.50 34.50 34.50
1.358 1.358 1.358 1.358 1.358 1.358 1.358 1.358 1.358 1.358

D Max 15.65 18.60 21.75 24.95 28.20 30.90 34.15 37.25 40.45 -
.616 .732 .856 .982 1.110 1.217 1.344 1.467 1.593 -
Ø for flange E 6.75 9.40 12.80 14.75 17.93 19.94 23.11 26.29 29.20 -
.266 .370 .504 .581 .706 .785 .910 1.035 1.150 -

F Max 12.85 12.85 12.85 12.85 12.85 12.85 12.85 12.85 12.85 -
.506 .506 .506 .506 .506 .506 .506 . 506 .506 -

L1 Max 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 -
1.417 1.417 1.417 1.417 1.417 1.417 1.417 1.417 1.417 -

min 3.20 4.75 7.40 8.90 12.75 13.45 14.75 16.35 17.95 -
Stainless steel backshells .126 .187 .291 .350 .502 .530 .581 .644 .707 -
G
Max 5.20 7.25 10.60 12.10 15.90 17.90 21.10 24.30 27.50 -
.205 .285 .417 .476 .626 .705 .831 .957 1.083 -

H Max 19.10 21.10 25.10 26.60 33.50 36.90 39.50 42.00 45.10 -
.752 .831 .988 1.047 1.319 1.453 1.555 1.654 1.776 -

J Max 22.65 24.45 27.85 27.85 30.85 37.85 40.45 44.35 46.75 -
.892 .963 1.096 1.096 1.215 1.490 1.593 1.746 1.841 -

L2 Max 45.80 47.60 51.00 51.00 54.00 61.00 63.60 67.50 69.90 -
1.803 1.874 2.008 2.008 2.126 2.402 2.504 2.657 2.752 -
Backnut 01
N Max 20.50 22.00 23.60 25.20 26.80 31.30 32.90 34.50 36.10 -
.807 .866 .929 .992 1.055 1.232 1.295 1.358 1.421 -

min 3.20 4.75 7.40 8.90 12.75 13.15 14.75 16.35 17.95 -
.126 .187 .291 .350 .502 .518 .581 .644 .707 -
L
Max 5.20 7.25 10.60 12.10 15.90 17.90 21.10 24.30 27.50 -
.205 .285 .417 .476 .626 .705 .831 .957 1.083 -

M Max 27.60 29.30 31.90 33.40 37.30 38.70 40.25 41.90 43.50 -
1.087 1.154 1.256 1.315 1.469 1.524 1.585 1.650 1.713 -

L3 Max 50.75 52.45 55.05 56.55 60.45 61.85 63.40 65.05 66.65 -
1.998 2.065 2.167 2.226 2.380 2.435 2.496 2.561 2.624 -

P Max 15.20 18.30 21.50 24.70 28.70 29.60 32.90 36.00 39.50 -
.598 .720 .846 .972 1.130 1.165 1.295 1.417 1.555 -
7.50 9.70 12.90 14.90 18.05 20.05 23.40 26.40 29.50 -
Ø for flange

Q Max .295 .382 .508 .587 .711 .789 .921 1.039 1.161 -

R Max 12.70 12.70 12.70 12.70 12.70 12.70 12.70 12.70 12.70 -
.500 .500 .500 .500 .500 .500 .500 .500 .500 -

L4 Max 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 -
1.417 1.417 1.417 1.417 1.417 1.417 1.417 1.417 1.417 -
Straight
cable clamp min 3.18 4.75 7.40 8.91 12.72 13.16 14.76 16.36 17.93 -
.125 .187 .291 .351 .501 .518 .581 .644 .706 -
02 S
Max 5.18 7.26 10.57 12.10 15.88 17.93 21.11 24.28 27.46 -
.204 .286 .416 .476 .623 .706 .831 .956 1.081 -

T Max 19.10 21.15 25.10 26.60 33.50 36.90 39.60 42.00 45.10 -
.752 .833 .988 1.047 1.319 1.453 1.559 1.654 1.776 -

U Max 22.50 25.35 28.50 28.50 31.70 38.05 41.50 44.40 47.60 -
.886 .998 1.122 1.122 1.248 1.498 1.634 1.748 1.874 -

L5 Max 45.80 48.65 51.80 51.80 55.00 61.35 64.80 67.70 70.90 -
1.803 1.915 2.039 2.039 2.165 2.415 2.551 2.665 2.791 -

137
 8533 Series
Square flange receptacle type 0 classes WS - RS - AS - KS - ES with backshells

Aluminum backshells
Thread as plug (DIM.B)

Backnut 31
Ø for flange

Straight
cable clamp
52 shell 08 10 12 14 16 18 20 22 24 28
size
A Max 14.27 17.48 22.22 23.83 26.97 30.18 33.32 36.53 39.67 45.99
.562 .688 .875 .938 1.062 1.188 1.312 1.438 1.562 1.811

B Max 18.35 18.35 18.35 18.35 18.35 18.35 18.35 18.35 18.35 18.35
.722 .722 .722 .722 .722 .722 .722 .722 .722 .722

C Max 1.45 1.45 1.45 1.45 1.45 1.45 1.45 1.45 1.45 1.45
.057 .057 .057 .057 .057 .057 .057 .057 .057 .057

D Max 12.66 15.84 19.02 22.19 25.36 26.95 30.12 33.30 36.47 44.41
.498 .624 .749 .874 .998 1.061 1.186 1.311 1.436 1.748
Elbow 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00
cable clamp E Max 1.417 1.417 1.417 1.417 1.417 1.417 1.417 1.417 1.417 1.417
51 F Max 20.75 23.95 26.31 28.69 31.88 34.24 36.63 39.80 43.38 50.83
.817 .943 1.036 1.130 1.255 1.348 1.442 1.567 1.708 2.001

G 15.09 18.26 20.62 23.01 24.61 26.97 29.36 31.75 34.92 39.67
.594 .719 .812 .906 .969 1.062 1.156 1.250 1.375 1.562

H Max 3.10 3.10 3.10 3.10 3.10 3.10 3.10 3.10 3.90 3.90
Ø for flange .122 .122 .122 .122 .122 .122 .122 .122 .154 .154

J Max 15.65 18.60 21.75 24.95 28.20 30.90 34.15 37.25 40.45 -
.616 .732 .856 .982 1.110 1.217 1.344 1.467 1.593 -

K 6.75 9.40 12.80 14.75 17.95 19.95 23.10 26.30 40.45 -

.266 .370 .504 .581 .707 .785 .909 1.035 1.593 -

L Max 12.85 12.85 12.85 12.85 12.85 12.85 12.85 12.85 12.85 -
.506 .506 .506 .506 .506 .506 .506 .506 .506 -

L1 Max 37.60 37.60 37.60 37.60 37.60 37.60 37.60 37.60 37.60 -
Stainless steel backshells 1.480 1.480 1.480 1.480 1.480 1.480 1.480 1.480 1.480 -

min 3.20 4.75 7.40 8.90 12.75 13.15 14.75 16.35 17.95 -
.126 .187 .291 .350 .502 .518 .581 .644 .707 -
M
Max 5.20 7.25 10.60 12.10 15.90 17.90 21.10 24.30 27.50 -
.205 .285 .417 .476 .626 .705 .831 .957 1.083 -

N Max 19.10 21.10 25.10 26.60 33.50 36.90 39.50 42.00 45.10 -
.752 .831 .988 1.047 1.319 1.453 1.555 1.654 1.776 -
Backnut 01 P Max 22.65 24.45 27.85 27.85 30.85 37.85 40.45 44.35 46.75 -
.892 .963 1.096 1.096 1.215 1.490 1.593 1.746 1.841 -

L2 Max 47.40 49.20 52.60 52.60 55.60 62.60 65.20 69.10 71.50 -
1.866 1.937 2.071 2.071 2.189 2.465 2.567 2.720 2.815 -

Q Max 20.50 22.00 23.60 25.20 26.80 31.30 32.90 34.50 36.10 -
.807 .866 .929 .992 1.055 1.232 1.295 1.358 1.421 -
3.20 4.75 7.40 8.90 12.75 13.15 14.75 16.35 17.95 -
Ø for flange

min .126 .187 .291 .350 .502 .518 .581 .644 .707 -
R
Max 5.20 7.25 10.60 12.10 15.90 17.90 21.10 24.30 27.50 -
.205 .285 .417 .476 .626 .705 .831 .957 1.083 -

S Max 27.60 29.30 31.90 33.40 37.30 38.70 40.25 41.90 43.50 -
1.087 1.154 1.256 1.315 1.469 1.524 1.585 1.650 1.713 -

L3 Max 52.35 54.05 56.65 58.15 62.05 63.45 65.00 66.65 68.25 -
Straight 2.061 2.128 2.230 2.289 2.443 2.498 2.559 2.624 2.687 -
cable clamp 15.20 18.30 21.50 24.70 28.10 29.60 32.90 36.00 39.50 -
02 T Max .598 .720 .846 .972 1.106 1.165 1.295 1.417 1.555 -

U Max 7.50 9.70 12.90 14.90 18.05 20.05 23.40 26.40 29.50 -
.295 .382 .508 .587 .711 .789 .921 1.039 1.161 -

V Max 12.70 12.70 12.70 12.70 12.70 12.70 12.70 12.70 12.70 -
.500 .500 .500 .500 .500 .500 .500 .500 .500 -

L4 Max 37.60 37.60 37.60 37.60 37.60 37.60 37.60 37.60 37.60 -
1.480 1.480 1.480 1.480 1.480 1.480 1.480 1.480 1.480 -

min 3.18 4.75 7.40 8.91 12.72 13.16 14.76 16.36 17.93 -
.125 .187 .291 .351 .501 .518 .581 .644 .706 -
W
Max 5.18 7.26 10.57 12.10 15.88 17.93 21.11 24.28 27.46 -
.204 .286 .416 .476 .625 .706 .831 .956 1.081 -

X Max 19.10 21.15 25.10 26.60 33.50 36.90 39.60 42.00 45.10 -
.752 .833 .988 1.047 1.319 1.453 1.559 1.654 1.776 -

Y Max 22.50 25.35 28.50 28.50 31.70 38.05 41.50 44.40 47.60 -
.886 .998 1.122 1.122 1.248 1.498 1.634 1.748 1.874 -

L5 Max 47.40 50.25 53.40 53.40 56.60 62.95 66.40 69.30 72.60 -
1.866 1.978 2.102 2.102 2.228 2.478 2.614 2.728 2.858 -

138
8533 Series
Jam nut receptacle type 7 classes WS - RS - AS - KS - ES with backshells

Aluminum backshells Thread as plug (DIM.B)

Backnut 31
Ø for flange

Straight
cable clamp
52
shell 08 10 12 14 16 18 20 22 24
size
A Max 14.27 17.47 22.22 23.82 26.97 30.18 33.32 36.53 39.67
.562 .688 .875 .938 1.062 1.188 1.312 1.438 1.562

B Max 19.84 19.84 19.84 19.84 19.84 19.84 19.84 19.84 19.84
.781 .781 .781 .781 .781 .781 .781 .781 .781

min 3.18 3.18 3.18 3.18 3.18 3.18 3.18 3.18 3.18
.125 .125 .125 .125 .125 .125 .125 .125 .125
D
Max 1.57 1.57 1.57 1.57 1.57 1.57 1.57 1.57 1.57
.062 .062 .062 .062 .062 .062 .062 .062 .062
Elbow E Max 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00
cable clamp 1.417 1.417 1.417 1.417 1.417 1.417 1.417 1.417 1.417
51 F Max 27.38 30.28 35.05 38.51 41.68 44.86 49.63 52.78 55.42
1.078 1.192 1.380 1.516 1.641 1.766 1.954 2.078 2.182

G Max 24.89 28.04 32.79 35.33 38.51 41.68 44.86 49.63 52.81
.980 1.104 1.291 1.391 1.516 1.641 1.766 1.954 2.079

H Max 21.06 24.23 29.01 30.61 33.76 36.96 40.11 43.31 46.46
Ø for flange .829 .954 1.142 1.205 1.329 1.455 1.579 1.705 1.829

J Max 15.65 18.60 21.75 24.95 28.20 30.90 34.15 37.25 40.45
.616 .732 .856 .982 1.110 1.217 1.344 1.467 1.593

K 6.75 9.40 12.80 14.75 17.95 19.95 23.10 26.30 40.45

.266 .370 .504 .581 .707 .785 .909 1.035 1.593

L Max 12.85 12.85 12.85 12.85 12.85 12.85 12.85 12.85 12.85
.506 .506 .506 .506 .506 .506 .506 .506 .506

L1 Max 37.60 37.60 37.60 37.60 37.60 37.60 37.60 37.60 37.60
Stainless steel backshells 1.480 1.480 1.480 1.480 1.480 1.480 1.480 1.480 1.480

min 3.20 4.75 7.40 8.90 12.75 13.15 14.75 16.35 17.95
.126 .187 .291 .350 .502 .518 .581 .644 .707
M Max 5.20 7.25 10.60 12.10 15.90 17.90 21.10 24.30 27.50
.205 .285 .417 .476 .626 .705 .831 .957 1.083

N Max 19.10 21.10 25.10 26.60 33.50 36.90 39.50 42.00 45.10
.752 .831 .988 1.047 1.319 1.453 1.555 1.654 1.776
Backnut 01 P Max 22.65 24.45 27.85 27.85 30.85 37.85 40.45 44.35 46.75
.892 .963 1.096 1.096 1.215 1.490 1.593 1.746 1.841

L2 Max 47.40 49.20 52.60 52.60 55.60 62.60 65.20 69.10 71.50
1.866 1.937 2.071 2.071 2.189 2.465 2.567 2.720 2.815

O Max 20.50 22.00 23.60 25.20 26.80 31.30 32.90 34.50 36.10
.807 .866 .929 .992 1.055 1.232 1.295 1.358 1.421
3.20 4.75 7.40 8.90 12.75 13.15 14.75 16.35 17.95
Ø for flange

min .126 .187 .291 .350 .502 .518 .581 .644 .707
R
Max 5.20 7.25 10.60 12.10 15.90 17.90 21.10 24.30 27.50
.205 .285 .417 .476 .626 .705 .831 .957 1.083

S Max 27.60 29.30 31.90 33.40 37.30 38.70 40.25 41.90 43.50
1.087 1.154 1.256 1.315 1.469 1.524 1.585 1.650 1.713

L3 Max 52.35 54.05 56.65 58.15 62.05 63.45 65.00 66.65 68.25
Straight 2.061 2.128 2.230 2.289 2.443 2.498 2.559 2.624 2.687
cable clamp T Max 15.20 18.30 21.50 24.70 28.10 29.60 32.90 36.00 39.50
.598 .720 .846 .972 1.106 1.165 1.295 1.417 1.555
02
U Max 7.50 9.70 12.90 14.90 18.05 20.05 23.40 26.40 29.50
.295 .382 .508 .587 .711 .789 .921 1.039 1.161

V Max 12.70 12.70 12.70 12.70 12.70 12.70 12.70 12.70 12.70
.500 .500 .500 .500 .500 .500 .500 .500 .500

L4 Max 37.60 37.60 37.60 37.60 37.60 37.60 37.60 37.60 37.60
1.480 1.480 1.480 1.480 1.480 1.480 1.480 1.480 1.480

min 3.18 4.75 7.40 8.91 12.72 13.16 14.76 16.36 17.93
.125 .187 .291 .351 .501 .354 .581 .644 .706
W
Max 5.18 7.26 10.57 12.10 15.88 17.93 21.11 24.28 27.46
.204 .286 .416 .476 .625 .706 .831 .956 1.081

X Max 19.10 21.15 25.10 26.60 33.50 36.90 39.60 42.00 45.10
.752 .833 .988 1.047 1.319 1.453 1.559 1.654 1.776

Y Max 22.50 25.35 28.50 28.50 31.70 38.05 41.50 44.40 47.60
.886 .998 1.122 1.122 1.248 1.498 1.634 1.748 1.874

L5 Max 47.40 50.25 53.40 53.40 56.60 62.95 66.40 69.30 72.60
1.866 1.978 2.102 2.102 2.228 2.478 2.614 2.728 2.858

139
 8533 Series
Panel cut-out Type 0
shell 08 10 12 14 16 18 20 22 24 28
size

15.80 18.70 23.40 24.90 28.30 31.10 34.50 37.50 40.60 48.00
A min .622 .736 .921 .980 1.114 1.224 1.358 1.476 1.598 1.890

15.09 18.26 20.62 23.01 24.61 26.97 29.36 31.75 34.92 39.67
E .594 .719 .812 .906 .969 1.062 1.156 1.250 1.375 1.562

3.20 3.20 3.20 3.20 3.20 3.20 3.20 3.20 3.80 3.80
J .126 .126 .126 .126 .126 .126 .126 .126 .150 .150

3.18 3.18 3.18 3.18 3.18 3.18 3.18 3.18 3.18 3.18
C Max .125 .125 .125 .125 .125 .125 .125 .125 .125 .125

3.18 3.18 3.18 3.18 3.18 3.18 3.18 3.18 3.18 3.18
D Max .125 .125 .125 .125 .125 .125 .125 .125 .125 .125

Panel cut-out Type 7

shell 08 10 12 14 16 18 20 22 24
size

J 16.00 19.17 23.92 25.52 28.70 31.87 35.05 38.22 41.40

.630 .755 .942 1.005 1.130 1.255 1.380 1.505 1.630

H 15.24 18.41 23.16 24.76 27.94 30.99 34.16 37.33 40.51

.600 .725 .912 .975 1.100 1.220 1.345 1.470 1.595

K Max 3.18 3.18 3.18 3.18 3.18 3.18 3.18 3.18 3.18
.125 .125 .125 .125 .125 .125 .125 .125 .125

Dimensions
Hermetic receptacle Type 1Y/1YE
shell A B C D E F G ØJ
size Max Max Max Max Max Max Max min

08 1.45 22.05 18.45 14.29 18.12 12.70 26.50 12.96

.057 .868 .726 .563 .713 .500 1.043 .510

10 1.45 22.05 18.45 17.46 21.52 14.25 26.50 14.53

.057 .868 .726 .687 .847 .561 1.043 .572

12 1.45 22.05 18.45 22.22 26.57 19.05 26.50 19.30

.057 .868 .726 .875 1.046 .750 1.043 .760

14 1.45 22.05 18.45 23.81 27.82 20.60 26.50 20.88

.057 .868 .726 .937 1.095 .811 1.043 .822

16 1.45 22.05 18.45 26.99 30.92 23.79 26.50 24.05

.057 .868 .726 1.063 1.217 .937 1.043 .947

Panel cut-out 18 1.45 22.05 18.45 30.16 34.22 26.95 26.50 27.23
.057 .868 .726 1.187 1.347 1.061 1.043 1.072

20* 1.45 22.05 18.45 33.34 37.22 30.12 26.50 30.40

.057 .868 .726 1.313 1.465 1.186 1.043 1.097

22 1.45 22.05 18.45 36.51 40.62 33.30 26.50 23.58

.057 .868 .726 1.437 1.599 1.311 1.043 .928

24* 1.45 22.05 18.45 39.69 43.62 36.47 26.50 36.70

.057 .868 .726 1.563 1.717 1.436 1.043 1.445

* Consult us

140
8533 Series
Hermetic receptacle type 2Y/2YE Panel cut-out

4 holes ØG

shell A B C D E F G H J K L M N P
size Max Max Max Max Max Max Max Max Max Max min
08 1.45 18.35 22.05 14.29 12.70 26.50 3.00 20.75 15.09 15.09 3.20 3.18 3.18 15.70
.057 .722 .868 .563 .500 1.043 .118 .817 .594 .594 .126 .125 .125 .618

10 1.45 18.35 22.05 17.46 14.25 26.50 3.00 23.95 18.26 18.26 3.20 3.18 3.18 18.90
.057 .722 .868 .687 .561 1.043 .118 .943 .719 .719 .126 .125 .125 .744

12 1.45 18.35 22.05 22.22 19.05 26.50 3.00 26.31 20.62 20.62 3.20 3.18 3.18 23.50
.057 .722 .868 .875 .750 1.043 .118 1.036 .812 .812 .126 .125 .125 .925

14 1.45 18.35 22.05 23.81 20.60 26.50 3.00 28.69 23.01 23.01 3.20 3.18 3.18 25.10
.057 .722 .868 .937 .811 1.043 .118 1.130 .906 .906 .126 .125 .125 .988

16 1.45 18.35 22.05 26.99 23.79 26.50 3.00 31.88 24.61 24.61 3.20 3.18 3.18 28.30
.057 .722 .868 1.063 .937 1.043 .118 1.255 .969 .969 .126 .125 .125 1.114
1.45 18.35 22.05 30.16 26.95 26.50 3.00 34.24 26.97 26.97 3.20 3.18 3.18 31.40
18
.057 .722 .868 1.187 1.061 1.043 .118 1.348 1.062 1.062 .126 .125 .125 1.236
1.45 18.35 22.05 33.34 30.12 26.50 3.00 36.63 29.36 29.36 3.20 3.18 3.18 34.60
20*
.057 .722 .868 1.313 1.186 1.043 .118 1.442 1.156 1.156 .126 .125 .125 1.362
1.45 18.35 22.05 36.51 33.30 26.50 3.00 39.80 31.75 31.75 3.20 3.18 3.18 37.80
22
.057 .722 .868 1.437 1.311 1.043 .118 1.567 1.250 1.250 .126 .125 .125 1.488
24* 1.45 18.35 22.05 39.69 36.47 26.50 3.80 43.38 34.92 34.92 4.00 3.18 3.18 40.90
.057 .722 .868 1.563 1.436 1.043 .150 1.708 1.375 1.375 .157 .125 .125 1.610
* Not industrialized

Hermetic receptacle type 7Y/7YE Panel cut-out

shell A B C D E F G H J K
size Max Max Max Max Max Max Max Max
08 2.60 26.50 19.52 14.29 27.35 24.85 20.12 15.24 16.00 3.17
.102 1.043 .769 .563 1.077 .978 .792 .600 .630 .125

10 2.60 26.50 19.52 17.46 30.24 28.00 24.20 18.41 19.17 3.17
.102 1.043 .769 .687 1.191 1.102 .953 .725 .755 .125

12 2.60 26.50 19.52 22.22 35.01 32.75 28.95 23.16 23.92 3.17
.102 1.043 .769 .875 1.378 1.289 1.140 .912 .942 .125

14 2.60 26.50 19.52 23.81 38.46 35.29 30.30 24.76 25.52 3.17
.102 1.043 .769 .937 1.514 1.389 1.193 .975 1.005 .125

16 2.60 26.50 19.52 26.99 41.64 38.46 33.45 27.94 28.70 3.17
.102 1.043 .769 1.063 1.639 1.514 1.317 1.100 1.130 .125

18 2.60 26.50 19.52 30.16 44.81 41.64 34.64 30.99 31.87 3.17
.102 1.043 .769 1.187 1.764 1.639 1.364 1.220 1.255 .125

20* 3.35 26.50 19.52 33.34 49.60 44.86 39.80 34.16 35.05 3.17
.132 1.043 .769 1.313 1.953 1.766 1.567 1.345 1.380 .125

22 3.35 26.50 19.52 36.51 52.74 49.59 43.00 37.33 38.22 3.17
.132 1.043 .769 1.437 2.076 1.952 1.693 1.470 1.505 .125

24* 3.35 26.50 19.52 39.69 55.40 52.81 46.15 40.51 41.40 3.17
.132 1.043 .769 1.563 2.181 2.079 1.817 1.595 1.630 .125

* Not industrialized
141
 8533 Series
Protective caps Aluminum version shells A B
Max Max

cap for plug cap for receptacle 08 3.20 134.00

.126 5.276

10 3.20 134.00
.126 5.276

12 3.20 134.00
.126 5.276

14 3.20 134.00
.126 5.276

16 3.20 134.00
.126 5.276

18 3.20 134.00
.126 5.276

22 3.20 134.00
.126 5.276

Tooling contact
sizes mm2
wires
AWG crimping pliers
part numbers
locator
crimping 0.93 18 8365 (M 22520 / 1-01) 8365-02 (M22520 / 1-02)
20 0.60 20 or or
0.38 22 8476-01 (M 22520 / 2-01) 8476-02 (M22520 / 2-02)
0.21 24
1.91 14
1.34 16
16 0.93 18 8365 (M 22520 / 1-01) 8365-02 (M 22520 / 1-02)
0.60 20
0.38 22
3.18 12
12 8365 (M 22520 / 1-01) 8365-02 (M 22520 / 1-02)
1.91 14

Insertion and extraction contact sizes part numbers colour

of wired contacts 20 (M 81969-14-11) 8522-20 red
16 (M 81969-14-03) 8522-16 blue
disposable plastic tool :
• colored tip for insertion 12 (M 81969-14-04) 8522-12 yellow
• white tip for extraction

Extraction contact sizes part numbers

of unwired contacts 20 8522-56
16 8522-57
12 8522-58

Filler plug contact sizes part numbers colour

these filler plugs are installed at the rear 20 8522-389 A*/MS 27488-20 red
of unwired contacts to maintain connector 16 8522-390 A/MS 27488-16 blue
sealing 12 8522-391 A/MS 27488-12 yellow
* for class 200°C only

Reusable fixing plate

Two, three or four holes self locking fixing
plates, see page 126.

142