Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 148 views

    Dull Grading

    Uploaded by

    Rodrigo Black Segurondo
    dull grading

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Dull Grading

    Uploaded by

    Rodrigo Black Segurondo
    148 views2 pages
    dull grading

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    dull grading

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    148 views2 pages

    Dull Grading

    Uploaded by

    Rodrigo Black Segurondo
    dull grading

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    Security DBS Drill Bits

    Fixed Cutter Bits - IADC Dull Grading


    Cutting Structure
    Inner Rows Outer Rows Dull Char. Location Bearings/Seals X Gauge Other Dull Char. Reason Pulled
    1 2 3 4 X 6 7 8

    Inner Area Outer Area 1 Inner Cutting Structure 4 Location


    2/3 Radius 1/3 Radius
    2 Outer Cutting Structure C - Cone
    A measure of lost, worn and/or S - Shoulder
    broken cutting structure. N - Nose
    Linear Scale: 0-8
    HAL9086

    G - Gauge
    0 - No lost, worn and/or broken T - Taper
    cutting structure A - All Areas
    8 - All of cutting structure lost, 5 X
    worn and/or broken
    6 Gauge
    3Dull Characteristics I - In Gauge
    BF - Bond Failure
    1/16 - 1/16-in. Undergauge
    BT - Broken Teeth/Cutters
    2/16 - 1/8-in. Undergauge
    BU - Balled Up
    7 Other Dull Characteristics
    CR - Cored
    Gauge (Refer to column 3 codes)
    CT - Chipped Teeth/Cutters
    Shoulder ER - Erosion
    8 Reason Pulled or Run Terminated
    FC - Flat Crested Wear BHA - Change Bottomhole Assembly
    Taper
    HAL9085

    Cone
    Nose HC - Heat Checking CM - Condition Mud
    JD - Junk Damage CP - Core Point
    LN - Lost Nozzle DMF - Downhole Motor Failure
    * LT - Lost Teeth/Cutters** DP - Drill Plug
    NO - No Dull Characteristic DSF - Drill String Failure
    No Wear Worn Cutter DST - Drill Stem Test
    HAL9045

    (WT) NO - No Major Characteristics


    NR - Not Rerunable DTF - Downhole Tool Failure
    OC - Off Center Wear FM - Formation Change
    PN - Plugged Nozzle/Flow Passage HP - Hole Problems
    **
    RG - Rounded Gauge HR - Hours
    Lost Cutter Lost Cutter RO - Ring Out LIH - Left in Hole
    HAL9045

    (LT) (LT)
    RR - Rerunable LOG - Run Logs
    TR - Tracking (and Spalling) PP - Pump Pressure
    WO - Washed Out Bit PR - Penetration Rate
    WT - Worn Teeth/Cutters* RIG - Rig Repair
    TD - Total Depth/Casing Depth
    TQ - Torque
    TW - Twist Off
    WC - Weather Conditions
    WO - Washout - Drill String

    HALLIBURTON
    Fixed Cutter Bits - Ring Gauging
    Any fixed cutter bit should be ring gauged prior to running
    in the hole. Stabilizers should also be calipered or gauged to
    verify they meet API-approved outside dimension
    tolerances as shown in the following table. Fixed cutter bits
    should not be larger than the nominal diameter.

    API Fixed Cutter Bit Tolerances


    Bit Size In. Fixed Cutter Bit
    O.D. Tolerance In.
    6-3/4 and Smaller -0.015 to +0.00
    6-25/32 to 9 -0.020 to +0.00
    9-1/32 to 13-3/4 -0.030 to +0.00
    13-25/32 to 17-1/2 -0.045 to +0.00
    17-17/32 and Larger -0.063 to +0.00

    A “no go” gauge is used to ensure a bit is not smaller than


    allowed and, as the name implies, it should not go or slip
    down the entire length of the bit. A “go” gauge ensures
    a bit is not larger than allowed and should slip down the
    entire bit.

    www.halliburton.com

    H03086 09/05 Sales of Halliburton products and services will


    © 2005 Halliburton be in accord solely with the terms and conditions
    All Rights Reserved contained in the contract between Halliburton and
    Printed in U.S.A. the customer that is applicable to the sale.

    You might also like