Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 143 views

    Critical Component Three: Hardware Functional Requirements Design Parameters Analysis Resources Risks Counter Measures

    Uploaded by

    Steven
    The document discusses the critical design parameters for hardware that is used to hold components together on a jetski. It outlines functional requirements, analysis of risks and countermeasures. The requirements include allowing clearance for easy installation while preventing backout during use. Bolts must withstand tension stresses without breaking and be aesthetically pleasing. Analysis shows bolts can rattle out over time from vibration and heat expansion. Countermeasures include using nylock nuts, washers to distribute force, locking adhesives, and ensuring proper fitment and threading.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd

    Critical Component Three: Hardware Functional Requirements Design Parameters Analysis Resources Risks Counter Measures

    Uploaded by

    Steven
    143 views2 pages
    The document discusses the critical design parameters for hardware that is used to hold components together on a jetski. It outlines functional requirements, analysis of risks and countermeasures. The requirements include allowing clearance for easy installation while preventing backout during use. Bolts must withstand tension stresses without breaking and be aesthetically pleasing. Analysis shows bolts can rattle out over time from vibration and heat expansion. Countermeasures include using nylock nuts, washers to distribute force, locking adhesives, and ensuring proper fitment and threading.

    Original Description:

    Hardware

    Original Title

    Component 3

    Copyright

    © © All Rights Reserved

    Available Formats

    DOCX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document discusses the critical design parameters for hardware that is used to hold components together on a jetski. It outlines functional requirements, analysis of risks and countermeasures. The requirements include allowing clearance for easy installation while preventing backout during use. Bolts must withstand tension stresses without breaking and be aesthetically pleasing. Analysis shows bolts can rattle out over time from vibration and heat expansion. Countermeasures include using nylock nuts, washers to distribute force, locking adhesives, and ensuring proper fitment and threading.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    143 views2 pages

    Critical Component Three: Hardware Functional Requirements Design Parameters Analysis Resources Risks Counter Measures

    Uploaded by

    Steven
    The document discusses the critical design parameters for hardware that is used to hold components together on a jetski. It outlines functional requirements, analysis of risks and countermeasures. The requirements include allowing clearance for easy installation while preventing backout during use. Bolts must withstand tension stresses without breaking and be aesthetically pleasing. Analysis shows bolts can rattle out over time from vibration and heat expansion. Countermeasures include using nylock nuts, washers to distribute force, locking adhesives, and ensuring proper fitment and threading.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    of 2

    Critical Component Three: Hardware

    Functional Design parameters Analysis Resources Risks Counter


    requirements Measures
    Hold the 1) Allow clearance Jetskis are known for Previous knowledge and Without clearance Install bolts
    components in the holes to rattling bolts out of the sophomore stresses can build around and holes with
    together allow for easy engine even with locking design/machinist the bolt when the correct
    install nuts and lock-tight. handbook material expands do to fitment
    2) Not backout Clearances in holes allow heat.
    while in use for the correct fitment of Use nylock
    3) Create uniform hardware without inducing Bolts backout causing nuts or lock
    distribution of added stresses. failure tight
    forces though
    the components Too much force on the Use large
    (washers) material that the bolt is washers to
    holding can cause failure distribute the
    forces
    throughout
    the material
    Withstand the 1) Use bolts that Bolts increase in strength http://tinelok.com/grade- Steel bolts will corrode Aluminum or
    forces will withstand with the type of material, 5-vs-grade-8-fasteners/ and rust over time stainless steel
    without the tension grade, and will the diameter causing premature failure bolts can be
    breaking. stresses in them of the bolt. used to
    2) Use nuts that Nuts not installed prevent this.
    will help The use of smaller diameter correctly (cross threaded)
    distribute forces but larger in quantity bolts can cause premature Ensure
    to the washers can help distribute the failure smooth
    without forces throughout the parts threading of
    breaking being fastened and prevent More hardware means nuts to
    3) Strategic concentrated loads. more places for them to prevent cross
    placement of back out this causing threading
    hardware can larger forces on other
    allow for hardware Use nylock
    smaller nuts or lock
    diameters and tight to keep
    more distributed from backing
    forces on other out
    parts.
    Be 1) Paint it to match Better looks increases the Previous knowledge Addons can pop off Use pressure
    aesthetically 2) Design add ons probability of use. while riding clips so they
    pleasing that make Otherwise if produced it lock onto
    system look won’t sell. Paint will also Paint might chip from place and
    seamless seal the material from any removing or installing cannot be
    3) Use round small possible oxidation. the bolts. easily
    headed bolts on removed with
    the outside out a tool.
    edges to help Stock looks can cause
    the designs others to be jealous of Powder coat
    aesthetics. you on the water instead of
    regular paint
    or paint them
    after install.

    Give them
    your phone
    number if
    they want to
    buy one from
    you

    You might also like