This document contains information about drilling pressures for a well including well geometry, drilling fluid properties, and calculated surge and swab pressures by section. It lists the length and diameter of 5 annular sections, drilling mud properties, and results including critical velocity, induced pressure difference, equivalent change in ECD, and surge and swab ECD by section to help inform drilling operations.
Copyright:
Attribution Non-Commercial (BY-NC)
Available Formats
Download as XLS, PDF, TXT or read online from Scribd
This document contains information about drilling pressures for a well including well geometry, drilling fluid properties, and calculated surge and swab pressures by section. It lists the length and diameter of 5 annular sections, drilling mud properties, and results including critical velocity, induced pressure difference, equivalent change in ECD, and surge and swab ECD by section to help inform drilling operations.
This document contains information about drilling pressures for a well including well geometry, drilling fluid properties, and calculated surge and swab pressures by section. It lists the length and diameter of 5 annular sections, drilling mud properties, and results including critical velocity, induced pressure difference, equivalent change in ECD, and surge and swab ECD by section to help inform drilling operations.
Copyright:
Attribution Non-Commercial (BY-NC)
Available Formats
Download as XLS, PDF, TXT or read online from Scribd
This document contains information about drilling pressures for a well including well geometry, drilling fluid properties, and calculated surge and swab pressures by section. It lists the length and diameter of 5 annular sections, drilling mud properties, and results including critical velocity, induced pressure difference, equivalent change in ECD, and surge and swab ECD by section to help inform drilling operations.
Copyright:
Attribution Non-Commercial (BY-NC)
Available Formats
Download as XLS, PDF, TXT or read online from Scribd
Download as xls, pdf, or txt
You are on page 1of 1
Name of Company:
Well Name & Number: Drilling Application
Microsoft Excel 97 Date: September 18, 2010 SWAB SWAB and and SURGE SURGE PRESSURES PRESSURES
WELL GEOMETRY SEC 1 SEC 2 SEC 3 SEC
SEC 44 SEC 5 Length of Each Annulus, ft? = 12,060 1,000 0 0 Diameter of Each Annulus, in? = 3.92 3.75 0 0 OD of Pipe Run in Each Annulus, in? = 2.88 2.88 0 0 DRILLING FLUID PROPERTIES OTHER Mud Weight, ppg? = 12.8 Measured Depth of Well, ft? = 13,060 Yield Point, lb/100ft²? = 17 Measured Depth Last Casing Set? = 12,060 Plastic Viscosity, cp? = 20 Desired Running Speed for Pipe, fpm? = 30 DEPTH CHECK Start with the Well Geometry entries Verify the Sum of Section Lengths Equals MD for the Well DO from the top of the hole in SEC 1. RESULTS BY SECTION SEC 1 SEC 2 SEC 3 SEC 4 SEC 5 Critical Velocity, fpm 417 424 0 Fluid Velocity Due to Pipe Movement 73 84 0 Induced Pressure Difference 794 96 0 Equivalent Change ECD, ppg 1.27 1.31 0.00 Surge ECD, ppg 14.07 14.11 0.00 Swab ECD, ppg 11.53 11.49 0.00 0.00 0.00 THE END
Knowledge of In-Situ Horizontal Stress Orientation For Suitable Direction of Drilling The Inclined and Horizontal Well For Well Placement and Well Completion