Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • UTP Cat 5E Belden F Cat

    Uploaded by

    Dumi Nelu
    56 views3 pages
    cat5

    Original Title

    UTP Cat 5E Belden F Cat (1)

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Report this Document
    cat5

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as pdf or txt
    56 views3 pages

    UTP Cat 5E Belden F Cat

    Uploaded by

    Dumi Nelu
    cat5

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as pdf or txt
    of 3

    1583E

    Networking Cables
    Datatwist® cable
    CAT 5E U/UTP PVC
    2013-04-04 v3

    Applications

    • Horizontal and building backbone cable


    • Support current and future Category 5e applications, such as:
    1000Base-T (Gigabit Ethernet), 100 Base-T, 10 Base-T, FDDI, ATM

    General standards

    • International standard: ISO/IEC 11801 2nd edition (2002) and ISO/IEC 11801 Amendment 2 (2010)
    • European standard: EN 50173-1 (2002) and EN 50173-1 Amendment 1 (2009)
    • U.S. Standards: ANSI/TIA/EIA 568-B.2-1 (2002)

    Construction & Dimensions

    1
    2
    3
    4

    1. Conductor
    Material Solid bare copper ETP
    Diameter AWG 24

    2. Insulation
    Material Polyethylene
    Nominal diameter over insulation 0.90 mm

    3. Cable core
    Pair 2 twisted insulated conductors
    Number of pairs 4, all twisted together
    Colour code pair 1 White / Blue & Blue
    Colour code pair 2 White / Orange & Orange
    Colour code pair 3 White / Green & Green
    Colour code pair 4 White / Brown & Brown

    4. Jacket
    Material PVC
    Diameter 4.8 ± 0.3 mm
    Electrical characteristics

    Reference standard : ISO/IEC 61156-5 edition 2.0 (2009)

    Low frequency and D.C. (at 20°C) Specification Unit


    D.C. resistance conductor < 9,5 Ω/100m
    Resistance unbalance: within a pair / between pairs <2/<4 %
    Insulation resistance ≥ 5000 MΩ.km
    Dielectric strength conductor-conductor (2 sec.) 2.5 kV DC
    Mutual capacitance < 56 nF/km
    Capacitance unbalance pair to ground < 1600 pF/km
    Nominal velocity of propagation (for information only) > 0.6 c
    Delay skew (differential delay) ≤ 40 ns/100m

    High frequency (at 20°), reference standard: ISO/IEC61156-5


    TYPE 1* 4 10 16 20 31.25 62.5 100 MHz
    Attenuation 2.1 4.0 6.3 8.0 9.0 11.4 16.5 21.3 dB/100m
    NEXT 65.3 56.3 50.3 47.2 45.8 42.9 38.4 35.3 dB/100m
    PS NEXT 62.3 53.3 47.3 44.2 42.8 39.9 35.4 32.3 dB/100m
    ACR 63.2 52.32 44.0 39.2 36.8 31.5 21.9 14.0 dB/100m
    PS ACR 60.2 49.3 41.0 36.2 33.8 28.5 18.9 11.0 dB/100m
    ACR-F 64.0 52.0 44.0 39.9 38.0 34.1 28.1 24.0 dB/100m
    PS ACR-F 61.0 49.0 41.0 36.9 35.0 31.5 25.1 21.0 dB/100m
    Return Loss 20.0 23.0 25.0 25.0 25.0 23.6 21.5 20.1 dB/100m
    TCL level 1 40.0 34.0 30.0 28.0 27.0 25.1 22.0 20.0 dB/100m
    EL TCTL 35.0 23.0 15.0 10.9 9.0 5.5 dB/100m
    Impedance
    122.2 115.2 111.9 111.9 111.9 114.1 118.3 121.9 Ω
    upper limit
    Impedance
    81.8 86.8 89.4 89.4 89.4 87.7 84.5 82.0 Ω
    lower limit
    Propagation
    570 552 545 543 540 539 538 537 ns/100m
    delay
    NOTE: Limits below 4MHz are for information only

    2
    Mechanical characteristics

    Specification Unit
    Elongation at break of the conductors 8 %
    Minimum elongation at break of the insulation ≥ 100 %
    Minimum elongation at break of the sheath ≥ 100 %
    Tensile strength of sheath >9 MPa

    Environmental and overall characteristics

    Specification Unit
    Maximum operating voltage (for all temperatures cable is intended to be used) 72 V D.C.
    Maximum continuous current per conductor (@25°C) 1.5 A
    Temperature rating installation 0 / 50 °C
    Temperature rating operation - 30 / 60 °C
    Total cable weight 28 kg/km
    Minimum bending radius (during operation and installation) 20 / 40 mm
    Maximum pulling strength 65 N
    Burning load 290 kJ/m
    Fire performance according IEC 60332-1 Pass

    Belden declares this product to be in compliance with the environmental regulations EU RoHS (Directive 2002/95/EC, 27
    January 2003); this is valid for all material produced after the RoHS compliant date for this product.

    You might also like