Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 1K views

    Bosch Me7.1.1 ST10 Vag 1033

    Uploaded by

    Rafael Fávaro
    The document provides instructions for connecting an universal connector F34TD003 to the pins on a Bosch ME7.1.1 ST10F275 ECU. The lay-by pins are located in the lower part of the ECU. The universal connector supports K-line, CAN, and BDM connections and its color-coded wires should be connected directly to corresponding pins POL4, POL5, and the ECU connector. Pin assignments and supported communication protocols are provided.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Bosch Me7.1.1 ST10 Vag 1033

    Uploaded by

    Rafael Fávaro
    1K views3 pages
    The document provides instructions for connecting an universal connector F34TD003 to the pins on a Bosch ME7.1.1 ST10F275 ECU. The lay-by pins are located in the lower part of the ECU. The universal connector supports K-line, CAN, and BDM connections and its color-coded wires should be connected directly to corresponding pins POL4, POL5, and the ECU connector. Pin assignments and supported communication protocols are provided.

    Original Description:

    ligacao

    Original Title

    BOSCH_ME7.1.1_ST10_VAG_1033

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document provides instructions for connecting an universal connector F34TD003 to the pins on a Bosch ME7.1.1 ST10F275 ECU. The lay-by pins are located in the lower part of the ECU. The universal connector supports K-line, CAN, and BDM connections and its color-coded wires should be connected directly to corresponding pins POL4, POL5, and the ECU connector. Pin assignments and supported communication protocols are provided.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    1K views3 pages

    Bosch Me7.1.1 ST10 Vag 1033

    Uploaded by

    Rafael Fávaro
    The document provides instructions for connecting an universal connector F34TD003 to the pins on a Bosch ME7.1.1 ST10F275 ECU. The lay-by pins are located in the lower part of the ECU. The universal connector supports K-line, CAN, and BDM connections and its color-coded wires should be connected directly to corresponding pins POL4, POL5, and the ECU connector. Pin assignments and supported communication protocols are provided.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3

    BOSCH ME7.1.1 ST10F275 VAG VER 01.

    01

    The lay-by pins are placed in the lower part of the ECU.

    CONNECTIONS

    Dimensione Sport s.r.l - 15020 Gabiano (AL) - ITALY - Tel. +39 0142 955 201 – WEB : www.dimsport.com -1-
    BOSCH ME7.1.1 ST10F275 VAG VER 01.01

    DIRECT CONNECTION
    Connect the universal connector F34TD003 to POL4 & POL5 and to the ECU connector as shown in
    the pictures.

    Dimensione Sport s.r.l - 15020 Gabiano (AL) - ITALY - Tel. +39 0142 955 201 – WEB : www.dimsport.com -2-
    BOSCH ME7.1.1 ST10F275 VAG VER 01.01

    F34TD003
    ADATTATORE UNIVERSALE K, CAN, BDM
    UNIVERSAL ADAPTER K, CAN, BDM
    BOOT MODE K-CAN MICRO ST10F2XX & TRICORE

    COLOR / COLORE SIGNAL / SEGNALE


    YELLOW / GIALLO K-LINE
    GREEN / VERDE CAN LOW
    WHITE / BIANCO CAN HIGH
    BLUE / BLU POL 5
    GREY / GRIGIO POL4
    BROWN / MARRONE RESET

    BDM MODE MICRO MOTOROLA MPC5xx

    COLOR / COLORE SIGNAL / SEGNALE


    YELLOW / GIALLO DSD0
    GREEN / VERDE DSDI
    BROWN / MARRONE RESB
    GREY / GRIGIO DSCK

    Dimensione Sport s.r.l - 15020 Gabiano (AL) - ITALY - Tel. +39 0142 955 201 – WEB : www.dimsport.com -3-

    You might also like